aboutsummaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/runfiles/linux.run8
-rwxr-xr-xtests/test-runner/bin/zts-report.py1
-rwxr-xr-xtests/zfs-tests/tests/functional/alloc_class/alloc_class_012_pos.ksh7
-rw-r--r--tests/zfs-tests/tests/functional/cli_root/Makefile.am1
-rw-r--r--tests/zfs-tests/tests/functional/cli_root/zfs_remap/Makefile.am7
-rwxr-xr-xtests/zfs-tests/tests/functional/cli_root/zfs_remap/cleanup.ksh19
-rwxr-xr-xtests/zfs-tests/tests/functional/cli_root/zfs_remap/setup.ksh17
-rwxr-xr-xtests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_cliargs.ksh81
-rwxr-xr-xtests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_obsolete_counts.ksh79
-rw-r--r--tests/zfs-tests/tests/functional/removal/Makefile.am4
-rwxr-xr-xtests/zfs-tests/tests/functional/removal/removal_condense_export.ksh13
-rwxr-xr-xtests/zfs-tests/tests/functional/removal/removal_remap.ksh126
-rwxr-xr-xtests/zfs-tests/tests/functional/removal/removal_remap_deadlists.ksh12
-rwxr-xr-xtests/zfs-tests/tests/functional/removal/removal_with_remap.ksh32
14 files changed, 20 insertions, 387 deletions
diff --git a/tests/runfiles/linux.run b/tests/runfiles/linux.run
index b73528e43..4a9c06065 100644
--- a/tests/runfiles/linux.run
+++ b/tests/runfiles/linux.run
@@ -210,10 +210,6 @@ tests = ['zfs_receive_001_pos', 'zfs_receive_002_pos', 'zfs_receive_003_pos',
'zfs_receive_raw_incremental', 'zfs_receive_-e']
tags = ['functional', 'cli_root', 'zfs_receive']
-[tests/functional/cli_root/zfs_remap]
-tests = ['zfs_remap_cliargs', 'zfs_remap_obsolete_counts']
-tags = ['functional', 'cli_root', 'zfs_remap']
-
[tests/functional/cli_root/zfs_rename]
tests = ['zfs_rename_001_pos', 'zfs_rename_002_pos', 'zfs_rename_003_pos',
'zfs_rename_004_neg', 'zfs_rename_005_neg', 'zfs_rename_006_pos',
@@ -767,11 +763,11 @@ tags = ['functional', 'refreserv']
pre =
tests = ['removal_all_vdev', 'removal_check_space',
'removal_condense_export', 'removal_multiple_indirection',
- 'removal_remap', 'removal_remap_deadlists',
+ 'removal_remap_deadlists',
'removal_resume_export', 'removal_sanity', 'removal_with_add',
'removal_with_create_fs', 'removal_with_dedup',
'removal_with_errors', 'removal_with_export',
- 'removal_with_ganging', 'removal_with_faulted', 'removal_with_remap',
+ 'removal_with_ganging', 'removal_with_faulted',
'removal_with_remove', 'removal_with_scrub', 'removal_with_send',
'removal_with_send_recv', 'removal_with_snapshot',
'removal_with_write', 'removal_with_zdb', 'remove_expanded',
diff --git a/tests/test-runner/bin/zts-report.py b/tests/test-runner/bin/zts-report.py
index d046c13a5..b6f3cf22c 100755
--- a/tests/test-runner/bin/zts-report.py
+++ b/tests/test-runner/bin/zts-report.py
@@ -186,7 +186,6 @@ known = {
'inuse/inuse_007_pos': ['SKIP', na_reason],
'privilege/setup': ['SKIP', na_reason],
'refreserv/refreserv_004_pos': ['FAIL', known_reason],
- 'removal/removal_condense_export': ['SKIP', known_reason],
'removal/removal_with_zdb': ['SKIP', known_reason],
'rootpool/setup': ['SKIP', na_reason],
'rsend/rsend_008_pos': ['SKIP', '6066'],
diff --git a/tests/zfs-tests/tests/functional/alloc_class/alloc_class_012_pos.ksh b/tests/zfs-tests/tests/functional/alloc_class/alloc_class_012_pos.ksh
index bd6c6631f..7ab6a0543 100755
--- a/tests/zfs-tests/tests/functional/alloc_class/alloc_class_012_pos.ksh
+++ b/tests/zfs-tests/tests/functional/alloc_class/alloc_class_012_pos.ksh
@@ -93,14 +93,7 @@ for i in 1 2 3 4; do
log_must file_in_special_vdev $dataset $inum
done
-#
-# remove a special allocation vdev and force a remapping
-# N.B. The 'zfs remap' command has been disabled and may be removed.
-#
-export ZFS_REMAP_ENABLED=YES
-
log_must zpool remove $TESTPOOL $CLASS_DISK0
-log_must zfs remap $TESTPOOL/$TESTFS
sleep 5
log_must sync_pool $TESTPOOL
diff --git a/tests/zfs-tests/tests/functional/cli_root/Makefile.am b/tests/zfs-tests/tests/functional/cli_root/Makefile.am
index 99f125783..58f789514 100644
--- a/tests/zfs-tests/tests/functional/cli_root/Makefile.am
+++ b/tests/zfs-tests/tests/functional/cli_root/Makefile.am
@@ -20,7 +20,6 @@ SUBDIRS = \
zfs_promote \
zfs_property \
zfs_receive \
- zfs_remap \
zfs_rename \
zfs_reservation \
zfs_rollback \
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/Makefile.am b/tests/zfs-tests/tests/functional/cli_root/zfs_remap/Makefile.am
deleted file mode 100644
index 91abff68c..000000000
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/Makefile.am
+++ /dev/null
@@ -1,7 +0,0 @@
-pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/cli_root/zfs_remap
-
-dist_pkgdata_SCRIPTS = \
- setup.ksh \
- cleanup.ksh \
- zfs_remap_cliargs.ksh \
- zfs_remap_obsolete_counts.ksh
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/cleanup.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_remap/cleanup.ksh
deleted file mode 100755
index e78deacd5..000000000
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/cleanup.ksh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/ksh -p
-#
-# This file and its contents are supplied under the terms of the
-# Common Development and Distribution License ("CDDL"), version 1.0.
-# You may only use this file in accordance with the terms of version
-# 1.0 of the CDDL.
-#
-# A full copy of the text of the CDDL should have accompanied this
-# source. A copy of the CDDL is also available via the Internet at
-# http://www.illumos.org/license/CDDL.
-#
-
-#
-# Copyright 2018, loli10K <[email protected]>. All rights reserved.
-#
-
-. $STF_SUITE/include/libtest.shlib
-
-default_cleanup
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/setup.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_remap/setup.ksh
deleted file mode 100755
index 4497dbd74..000000000
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/setup.ksh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/ksh -p
-#
-# This file and its contents are supplied under the terms of the
-# Common Development and Distribution License ("CDDL"), version 1.0.
-# You may only use this file in accordance with the terms of version
-# 1.0 of the CDDL.
-#
-# A full copy of the text of the CDDL should have accompanied this
-# source. A copy of the CDDL is also available via the Internet at
-# http://www.illumos.org/license/CDDL.
-#
-
-#
-# Copyright 2018, loli10K <[email protected]>. All rights reserved.
-#
-
-. $STF_SUITE/include/libtest.shlib
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_cliargs.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_cliargs.ksh
deleted file mode 100755
index 80a5e6e0d..000000000
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_cliargs.ksh
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/ksh -p
-#
-# This file and its contents are supplied under the terms of the
-# Common Development and Distribution License ("CDDL"), version 1.0.
-# You may only use this file in accordance with the terms of version
-# 1.0 of the CDDL.
-#
-# A full copy of the text of the CDDL should have accompanied this
-# source. A copy of the CDDL is also available via the Internet at
-# http://www.illumos.org/license/CDDL.
-#
-
-#
-# Copyright 2018, loli10K <[email protected]>. All rights reserved.
-#
-
-. $STF_SUITE/include/libtest.shlib
-. $STF_SUITE/tests/functional/removal/removal.kshlib
-
-#
-# DESCRIPTION:
-# 'zfs remap' should only work with supported parameters.
-#
-# STRATEGY:
-# 1. Prepare a pool where a top-level VDEV has been removed
-# 2. Verify every supported parameter to 'zfs remap' is accepted
-# 3. Verify other unsupported parameters raise an error
-#
-
-# The 'zfs remap' command has been disabled and may be removed.
-export ZFS_REMAP_ENABLED=YES
-
-verify_runnable "both"
-
-function cleanup
-{
- destroy_pool $TESTPOOL
- rm -f $DISK1 $DISK2
-}
-
-log_assert "'zfs remap' should only work with supported parameters"
-log_onexit cleanup
-
-f="$TESTPOOL/fs"
-v="$TESTPOOL/vol"
-s="$TESTPOOL/fs@snap"
-b="$TESTPOOL/fs#bmark"
-c="$TESTPOOL/clone"
-
-typeset goodparams=("$f" "$v" "$c")
-typeset badparams=("-H" "-p" "-?" "$s" "$b" "$f $f" "$f $v" "$f $s")
-
-DISK1="$TEST_BASE_DIR/zfs_remap-1"
-DISK2="$TEST_BASE_DIR/zfs_remap-2"
-
-# 1. Prepare a pool where a top-level VDEV has been removed
-log_must truncate -s $(($MINVDEVSIZE * 2)) $DISK1
-log_must zpool create $TESTPOOL $DISK1
-log_must zfs create $f
-log_must zfs create -V 1M -s $v
-log_must zfs snap $s
-log_must zfs bookmark $s $b
-log_must zfs clone $s $c
-log_must truncate -s $(($MINVDEVSIZE * 2)) $DISK2
-log_must zpool add $TESTPOOL $DISK2
-log_must zpool remove $TESTPOOL $DISK1
-log_must wait_for_removal $TESTPOOL
-
-# 2. Verify every supported parameter to 'zfs remap' is accepted
-for param in "${goodparams[@]}"
-do
- log_must zfs remap $param
-done
-
-# 3. Verify other unsupported parameters raise an error
-for param in "${badparams[@]}"
-do
- log_mustnot zfs remap $param
-done
-
-log_pass "'zfs remap' only works with supported parameters"
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_obsolete_counts.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_obsolete_counts.ksh
deleted file mode 100755
index 1f0e0e85d..000000000
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_remap/zfs_remap_obsolete_counts.ksh
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/ksh -p
-#
-# This file and its contents are supplied under the terms of the
-# Common Development and Distribution License ("CDDL"), version 1.0.
-# You may only use this file in accordance with the terms of version
-# 1.0 of the CDDL.
-#
-# A full copy of the text of the CDDL should have accompanied this
-# source. A copy of the CDDL is also available via the Internet at
-# http://www.illumos.org/license/CDDL.
-#
-
-#
-# Copyright 2018, loli10K <[email protected]>. All rights reserved.
-#
-
-. $STF_SUITE/include/libtest.shlib
-. $STF_SUITE/tests/functional/removal/removal.kshlib
-
-#
-# DESCRIPTION:
-# 'zfs remap' depends on 'feature@obsolete_counts' being active
-#
-# STRATEGY:
-# 1. Prepare a pool where a top-level VDEV has been removed and with
-# feature@obsolete_counts disabled
-# 2. Verify any 'zfs remap' command cannot be executed
-# 3. Verify the same commands complete successfully when
-# feature@obsolete_counts is enabled
-#
-
-# N.B. The 'zfs remap' command has been disabled and may be removed.
-export ZFS_REMAP_ENABLED=YES
-
-verify_runnable "both"
-
-function cleanup
-{
- destroy_pool $TESTPOOL
- rm -f $DISK1 $DISK2
-}
-
-log_assert "'zfs remap' depends on feature@obsolete_counts being active"
-log_onexit cleanup
-
-f="$TESTPOOL/fs"
-v="$TESTPOOL/vol"
-s="$TESTPOOL/fs@snap"
-c="$TESTPOOL/clone"
-
-DISK1="$TEST_BASE_DIR/zfs_remap-1"
-DISK2="$TEST_BASE_DIR/zfs_remap-2"
-
-# 1. Prepare a pool where a top-level VDEV has been removed with
-# feature@obsolete_counts disabled
-log_must truncate -s $(($MINVDEVSIZE * 2)) $DISK1
-log_must zpool create -o feature@obsolete_counts=disabled $TESTPOOL $DISK1
-log_must zfs create $f
-log_must zfs create -V 1M -s $v
-log_must zfs snap $s
-log_must zfs clone $s $c
-log_must truncate -s $(($MINVDEVSIZE * 2)) $DISK2
-log_must zpool add $TESTPOOL $DISK2
-log_must zpool remove $TESTPOOL $DISK1
-log_must wait_for_removal $TESTPOOL
-
-# 2. Verify any 'zfs remap' command cannot be executed
-log_mustnot zfs remap $f
-log_mustnot zfs remap $v
-log_mustnot zfs remap $c
-
-# 3. Verify the same commands complete successfully when
-# feature@obsolete_counts is enabled
-log_must zpool set feature@obsolete_counts=enabled $TESTPOOL
-log_must zfs remap $f
-log_must zfs remap $v
-log_must zfs remap $c
-
-log_pass "'zfs remap' correctly depends on feature@obsolete_counts being active"
diff --git a/tests/zfs-tests/tests/functional/removal/Makefile.am b/tests/zfs-tests/tests/functional/removal/Makefile.am
index ba42b899a..dc52bf1f2 100644
--- a/tests/zfs-tests/tests/functional/removal/Makefile.am
+++ b/tests/zfs-tests/tests/functional/removal/Makefile.am
@@ -18,12 +18,12 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/removal
dist_pkgdata_SCRIPTS = \
cleanup.ksh removal_all_vdev.ksh removal_check_space.ksh \
removal_condense_export.ksh removal_multiple_indirection.ksh \
- removal_remap_deadlists.ksh removal_remap.ksh \
+ removal_remap_deadlists.ksh \
removal_reservation.ksh removal_resume_export.ksh \
removal_sanity.ksh removal_with_add.ksh removal_with_create_fs.ksh \
removal_with_dedup.ksh removal_with_errors.ksh \
removal_with_export.ksh removal_with_faulted.ksh \
- removal_with_ganging.ksh removal_with_remap.ksh \
+ removal_with_ganging.ksh \
removal_with_remove.ksh removal_with_scrub.ksh \
removal_with_send.ksh removal_with_send_recv.ksh \
removal_with_snapshot.ksh removal_with_write.ksh \
diff --git a/tests/zfs-tests/tests/functional/removal/removal_condense_export.ksh b/tests/zfs-tests/tests/functional/removal/removal_condense_export.ksh
index ad33caec8..655352f05 100755
--- a/tests/zfs-tests/tests/functional/removal/removal_condense_export.ksh
+++ b/tests/zfs-tests/tests/functional/removal/removal_condense_export.ksh
@@ -21,10 +21,6 @@
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/removal/removal.kshlib
-if is_linux; then
- log_unsupported "ZDB fails during concurrent pool activity."
-fi
-
function reset
{
log_must set_tunable64 zfs_condense_indirect_commit_entry_delay_ms 0
@@ -77,7 +73,14 @@ log_must zpool remove $TESTPOOL $REMOVEDISK
log_must wait_for_removal $TESTPOOL
log_mustnot vdevs_in_pool $TESTPOOL $REMOVEDISK
-log_must zfs remap $TESTPOOL/$TESTFS
+#
+# Touch one block under each L1 indirect block, so that the other data blocks
+# will be remapped to their concrete locations. These parameters assume
+# recordsize=512, indirect block size of 128K (1024 block pointers per
+# indirect block), and file size of less than 20*1024 blocks (10MB).
+#
+log_must stride_dd -i /dev/urandom -o $TESTDIR/file -b 512 -c 20 -s 1024
+
sync_pool $TESTPOOL
sleep 5
sync_pool $TESTPOOL
diff --git a/tests/zfs-tests/tests/functional/removal/removal_remap.ksh b/tests/zfs-tests/tests/functional/removal/removal_remap.ksh
deleted file mode 100755
index 5239ef3a5..000000000
--- a/tests/zfs-tests/tests/functional/removal/removal_remap.ksh
+++ /dev/null
@@ -1,126 +0,0 @@
-#! /bin/ksh -p
-#
-# CDDL HEADER START
-#
-# This file and its contents are supplied under the terms of the
-# Common Development and Distribution License ("CDDL"), version 1.0.
-# You may only use this file in accordance with the terms of version
-# 1.0 of the CDDL.
-#
-# A full copy of the text of the CDDL should have accompanied this
-# source. A copy of the CDDL is also available via the Internet at
-# http://www.illumos.org/license/CDDL.
-#
-# CDDL HEADER END
-#
-
-#
-# Copyright (c) 2015, 2016 by Delphix. All rights reserved.
-#
-
-. $STF_SUITE/include/libtest.shlib
-. $STF_SUITE/tests/functional/removal/removal.kshlib
-
-# N.B. The 'zfs remap' command has been disabled and may be removed.
-export ZFS_REMAP_ENABLED=YES
-
-default_setup_noexit "$DISKS"
-
-
-function cleanup
-{
- set_tunable64 zfs_condense_min_mapping_bytes 131072
- default_cleanup_noexit
-}
-
-log_onexit cleanup
-
-log_must set_tunable64 zfs_condense_min_mapping_bytes 1
-
-log_must zfs set recordsize=512 $TESTPOOL/$TESTFS
-
-#
-# Create a large file so that we know some of the blocks will be on the
-# removed device, and hence eligible for remapping.
-#
-log_must dd if=/dev/urandom of=$TESTDIR/file bs=$((2**12)) count=$((2**9))
-
-#
-# Randomly rewrite some of blocks in the file so that there will be holes and
-# we will not be able to remap the entire file in a few huge chunks.
-#
-for i in $(seq $((2**12))); do
- #
- # We have to sync periodically so that all the writes don't end up in
- # the same txg. If they were all in the same txg, only the last write
- # would go through and we would not have as many allocations to
- # fragment the file.
- #
- ((i % 100 > 0 )) || sync_pool || log_fail "Could not sync."
- random_write $TESTDIR/file $((2**9)) || \
- log_fail "Could not random write."
-done
-
-#
-# Remap should quietly succeed as a noop before a removal.
-#
-log_must zfs remap $TESTPOOL/$TESTFS
-remaptxg_before=$(zfs get -H -o value remaptxg $TESTPOOL/$TESTFS)
-(( $? == 0 )) || log_fail "Could not get remaptxg."
-[[ $remaptxg_before == "-" ]] || \
- log_fail "remaptxg ($remaptxg_before) had value before a removal"
-
-log_must zpool remove $TESTPOOL $REMOVEDISK
-log_must wait_for_removal $TESTPOOL
-log_mustnot vdevs_in_pool $TESTPOOL $REMOVEDISK
-
-#
-# remaptxg should not be set if we haven't done a remap.
-#
-remaptxg_before=$(zfs get -H -o value remaptxg $TESTPOOL/$TESTFS)
-(( $? == 0 )) || log_fail "Could not get remaptxg."
-[[ $remaptxg_before == "-" ]] || \
- log_fail "remaptxg ($remaptxg_before) had value before a removal"
-
-mapping_size_before=$(indirect_vdev_mapping_size $TESTPOOL)
-log_must zfs remap $TESTPOOL/$TESTFS
-
-# Try to wait for a condense to finish.
-for i in {1..5}; do
- sleep 5
- sync_pool
-done
-mapping_size_after=$(indirect_vdev_mapping_size $TESTPOOL)
-
-#
-# After the remap, there should not be very many blocks referenced. The reason
-# why our threshold is as high as 512 is because our ratio of metadata to
-# user data is relatively high, with only 64M of user data on the file system.
-#
-(( mapping_size_after < mapping_size_before )) || \
- log_fail "Mapping size did not decrease after remap: " \
- "$mapping_size_before before to $mapping_size_after after."
-(( mapping_size_after < 512 )) || \
- log_fail "Mapping size not small enough after remap: " \
- "$mapping_size_before before to $mapping_size_after after."
-
-#
-# After a remap, the remaptxg should be set to a non-zero value.
-#
-remaptxg_after=$(zfs get -H -o value remaptxg $TESTPOOL/$TESTFS)
-(( $? == 0 )) || log_fail "Could not get remaptxg."
-log_note "remap txg after remap is $remaptxg_after"
-(( remaptxg_after > 0 )) || log_fail "remaptxg not increased"
-
-#
-# Remap should quietly succeed as a noop if there have been no removals since
-# the last remap.
-#
-log_must zfs remap $TESTPOOL/$TESTFS
-remaptxg_again=$(zfs get -H -o value remaptxg $TESTPOOL/$TESTFS)
-(( $? == 0 )) || log_fail "Could not get remaptxg."
-log_note "remap txg after second remap is $remaptxg_again"
-(( remaptxg_again == remaptxg_after )) || \
- log_fail "remap not noop if there has been no removal"
-
-log_pass "Remapping a fs caused mapping size to decrease."
diff --git a/tests/zfs-tests/tests/functional/removal/removal_remap_deadlists.ksh b/tests/zfs-tests/tests/functional/removal/removal_remap_deadlists.ksh
index a2f6580b4..6db3587c5 100755
--- a/tests/zfs-tests/tests/functional/removal/removal_remap_deadlists.ksh
+++ b/tests/zfs-tests/tests/functional/removal/removal_remap_deadlists.ksh
@@ -21,9 +21,6 @@
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/removal/removal.kshlib
-# N.B. The 'zfs remap' command has been disabled and may be removed.
-export ZFS_REMAP_ENABLED=YES
-
default_setup_noexit "$DISKS"
log_onexit default_cleanup_noexit
@@ -45,7 +42,14 @@ fi
log_mustnot vdevs_in_pool $TESTPOOL $REMOVEDISK
log_must zdb -cd $TESTPOOL
-log_must zfs remap $TESTPOOL/$TESTFS
+#
+# Touch one block under each L1 indirect block, so that the other data blocks
+# will be remapped to their concrete locations. These parameters assume
+# recordsize=128K, indirect block size of 128K (1024 block pointers per
+# indirect block), and file size of less than 3*1024 blocks (384MB).
+#
+log_must stride_dd -i /dev/urandom -o $TESTDIR/file -b 131072 -c 3 -s 1024
+
log_must zdb -cd $TESTPOOL
log_must zfs snapshot $TESTPOOL/$TESTFS@snap-post3
diff --git a/tests/zfs-tests/tests/functional/removal/removal_with_remap.ksh b/tests/zfs-tests/tests/functional/removal/removal_with_remap.ksh
deleted file mode 100755
index 6f56740b8..000000000
--- a/tests/zfs-tests/tests/functional/removal/removal_with_remap.ksh
+++ /dev/null
@@ -1,32 +0,0 @@
-#! /bin/ksh -p
-#
-# CDDL HEADER START
-#
-# This file and its contents are supplied under the terms of the
-# Common Development and Distribution License ("CDDL"), version 1.0.
-# You may only use this file in accordance with the terms of version
-# 1.0 of the CDDL.
-#
-# A full copy of the text of the CDDL should have accompanied this
-# source. A copy of the CDDL is also available via the Internet at
-# http://www.illumos.org/license/CDDL.
-#
-# CDDL HEADER END
-#
-
-#
-# Copyright (c) 2015, 2017 by Delphix. All rights reserved.
-#
-
-. $STF_SUITE/include/libtest.shlib
-. $STF_SUITE/tests/functional/removal/removal.kshlib
-
-# N.B. The 'zfs remap' command has been disabled and may be removed.
-export ZFS_REMAP_ENABLED=YES
-
-default_setup_noexit "$DISKS"
-log_onexit default_cleanup_noexit
-
-test_removal_with_operation zfs remap $TESTPOOL/$TESTFS
-
-log_pass "Can remap a filesystem during removal"