Base init scripts for SYSV systems

* Based on the init scripts included with Debian GNU/Linux, then take code
  from the already existing ones, trying to merge them into one set of
  scripts that will work for 'everyone' for better maintainability.
  * Add configurable variables to control the workings of the init scripts:
    * ZFS_INITRD_PRE_MOUNTROOT_SLEEP
      Set a sleep time before we load the module (used primarily by initrd
      scripts to allow for slower media (such as  USB devices etc) to be
      availible before we load the zfs module).
    * ZFS_INITRD_POST_MODPROBE_SLEEP
      Set a timed sleep in the initrd to after the load of the zfs module.
    * ZFS_INITRD_ADDITIONAL_DATASETS
      To allow for mounting additional datasets in the initrd. Primarily used
      in initrd scripts to allow for when filesystem needed to boot (such as
      /usr, /opt, /var etc) isn't directly under the root dataset.
    * ZFS_POOL_EXCEPTIONS
      Exclude pools from being imported (in the initrd and/or init scripts).
    * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
      Set to control how dkms should build the dkms packages.
    * ZPOOL_IMPORT_PATH
      Set path(s) where "zpool import" should import pools from.
      This was previously the job of "USE_DISK_BY_ID" (which is still used
      for backwards compatibility) but was renamed to allow for better
      control of import path(s).
      * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
        set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
    * ZED_ARGS
      To allow for local options to zed without having to change the init script.
  * The import function, do_import(), imports pools by name instead of '-a'
    for better control of pools to import and from where.
    * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
      then ignore it.
    * If pool(s) isn't found with a simple "zpool import" (seen it happen),
      try looking for them in /dev/disk/by-id (if it exists). Any duplicates
      (pools found with both commands) is filtered out.
      * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
        so that the first, simple "zpool import $pool" is able to find it.
    * Fallback on importing the pool using the cache file (if it exists) only
      if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
      defaults) didn't work.
  * The export function, do_export(), will export all pools imported, EXCEPT
    the root pool (if there is one).
  * ZED script from the Debian GNU/Linux packages added.
    * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
      may be used on both LSB and Redhat style systems.
    * If there is no pool(s) imported and zed successfully shut down, we will
      unload the zfs modules.
  * The function library file for the ZoL init script is installed as
    /etc/init.d/zfs-functions.
  * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
    as well as the common function library is tagged as '%config(noreplace)' in
    the rpm rules file to make sure they are not replaced automatically if locally
    modifed.
  * Pitfals and workarounds:
    * If we're running from init, remove stale /etc/dfs/sharetab before importing
      pools in the zfs-import init script.
    * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
      everything quite early in the shutdown phase and zed is/should be stopped
      much later than that. We don't want zed to be among the ones killed, so add
      the zed pid to list of pids for 'sendsigs' to ignore.
    * CentOS uses echo_success() and echo_failure() to print out status of
      command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
      colour etc. This doesn't work with the modified IFS variable we need to
      use in zfs-import for some reason, so work around that when we define
      zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
  * All scripts passes ShellCheck (with one false positive in do_mount()).

Signed-off-by: Turbo Fredriksson [email protected]
Signed-off-by: Brian Behlendorf <[email protected]>
Reviewed by: Richard Yao <[email protected]>
Reviewed by: Chris Dunlap <[email protected]>
Closes #2974
Closes #2107

14 files changed, 1443 insertions, 786 deletions

diff --git a/etc/init.d/.gitignore b/etc/init.d/.gitignore
index 73304bc2c..3f16b08ec 100644
--- a/etc/init.d/.gitignore
+++ b/etc/init.d/.gitignore
@@ -1 +1,6 @@
+zfs-functions
+zfs-import
+zfs-mount
+zfs-share
+zfs-zed
 zfs
diff --git a/etc/init.d/Makefile.am b/etc/init.d/Makefile.am
index 5a049dfe1..895ffc1f9 100644
--- a/etc/init.d/Makefile.am
+++ b/etc/init.d/Makefile.am
@@ -1,22 +1,44 @@
 initdir = $(DEFAULT_INIT_DIR)
-init_SCRIPTS = zfs
+init_SCRIPTS = zfs-import zfs-mount zfs-share zfs-zed
+
+initcommondir = $(sysconfdir)/zfs
+initcommon_SCRIPTS = zfs-functions
+
+initconfdir = $(DEFAULT_INITCONF_DIR)
+initconf_SCRIPTS = zfs
 
 EXTRA_DIST = \
-	$(top_srcdir)/etc/init.d/zfs.fedora.in \
-	$(top_srcdir)/etc/init.d/zfs.gentoo.in \
-	$(top_srcdir)/etc/init.d/zfs.lsb.in \
-	$(top_srcdir)/etc/init.d/zfs.lunar.in \
-	$(top_srcdir)/etc/init.d/zfs.redhat.in
+	$(top_srcdir)/etc/init.d/zfs-functions.in \
+	$(top_srcdir)/etc/init.d/zfs-share.in \
+	$(top_srcdir)/etc/init.d/zfs-import.in \
+	$(top_srcdir)/etc/init.d/zfs-mount.in \
+	$(top_srcdir)/etc/init.d/zfs-zed.in \
+	$(top_srcdir)/etc/init.d/zfs.in
 
-$(init_SCRIPTS): $(init_SCRIPTS).$(DEFAULT_INIT_SCRIPT).in
-	-$(SED) -e 's,@bindir\@,$(bindir),g' \
-		-e 's,@sbindir\@,$(sbindir),g' \
-		-e 's,@udevdir\@,$(udevdir),g' \
-		-e 's,@udevruledir\@,$(udevruledir),g' \
-		-e 's,@sysconfdir\@,$(sysconfdir),g' \
-		-e 's,@initdir\@,$(initdir),g' \
-		-e 's,@runstatedir\@,$(runstatedir),g' \
-		'$@.$(DEFAULT_INIT_SCRIPT).in' >'$@'
+$(init_SCRIPTS) $(initconf_SCRIPTS) $(initcommon_SCRIPTS):
+	-(if [ -e /etc/debian_version ]; then \
+		NFS_SRV=nfs-kernel-server; \
+	  else \
+		NFS_SRV=nfs; \
+	  fi; \
+	  if [ -e /etc/gentoo-release ]; then \
+		SHELL=/sbin/runscript; \
+	  else \
+		SHELL=/bin/sh; \
+	  fi; \
+	  $(SED) -e 's,@bindir\@,$(bindir),g' \
+		 -e 's,@sbindir\@,$(sbindir),g' \
+		 -e 's,@udevdir\@,$(udevdir),g' \
+		 -e 's,@udevruledir\@,$(udevruledir),g' \
+		 -e 's,@sysconfdir\@,$(sysconfdir),g' \
+		 -e 's,@initconfdir\@,$(initconfdir),g' \
+		 -e 's,@initdir\@,$(initdir),g' \
+		 -e 's,@runstatedir\@,$(runstatedir),g' \
+		 -e "s,@SHELL\@,$$SHELL,g" \
+		 -e "s,@NFS_SRV\@,$$NFS_SRV,g" \
+		 '[email protected]' >'$@'; \
+	  [ '$@' = 'zfs-functions' -o '$@' = 'zfs' ] || \
+		chmod +x '$@')
 
 distclean-local::
-	-$(RM) $(init_SCRIPTS)
+	-$(RM) $(init_SCRIPTS) $(initcommon_SCRIPTS) $(initconf_SCRIPTS)
diff --git a/etc/init.d/README.md b/etc/init.d/README.md
new file mode 100644
index 000000000..a0d3d9947
--- /dev/null
+++ b/etc/init.d/README.md
@@ -0,0 +1,77 @@
+DESCRIPTION
+  These script were written with the primary intention of being portable and
+  usable on as many systems as possible.
+
+  This is, in practice, usually not possible. But the intention is there.
+  And it is a good one.
+
+  They have been tested successfully on:
+
+    * Debian GNU/Linux Wheezy
+    * Debian GNU/Linux Jessie
+    * Ubuntu Trusty
+    * CentOS 6.0
+    * CentOS 6.6
+    * Gentoo
+
+SUPPORT
+  If you find that they don't work for your platform, please report this
+  at the ZFS On Linux issue tracker at https://github.com/zfsonlinux/zfs/issues.
+
+  Please include:
+
+    * Distribution name
+    * Distribution version
+    * Where to find an install CD image
+    * Architecture
+
+  If you have code to share that fixes the problem, that is much better.
+  But please remember to try your best keep portability in mind. If you
+  suspect that what you're writing/modifying won't work on anything else
+  than your distribution, please make sure to put that code in appropriate
+  if/else/fi code.
+
+  It currently MUST be bash (or fully compatible) for this to work.
+
+  If you're making your own distribution and you want the scripts to
+  work on that, the biggest problem you'll (probably) have is the part
+  at the beginning of the "zfs-functions.in" file which sets up the
+  logging output.
+
+INSTALLING INIT SCRIPT LINKS
+  To setup the init script links in /etc/rc?.d manually on a Debian GNU/Linux
+  (or derived) system, run the following commands (the order is important!):
+
+    update-rc.d zfs-zed    start 07 S .       stop 08 0 1 6 .
+    update-rc.d zfs-import start 07 S .       stop 07 0 1 6 .
+    update-rc.d zfs-mount  start 02 2 3 4 5 . stop 06 0 1 6 .
+    update-rc.d zfs-share  start 27 2 3 4 5 . stop 05 0 1 6 .
+
+  To do the same on RedHat, Fedora and/or CentOS:
+
+    chkconfig zfs-zed
+    chkconfig zfs-import
+    chkconfig zfs-mount
+    chkconfig zfs-share
+
+  On Gentoo:
+
+    rc-update add zfs-zed boot
+    rc-update add zfs-import boot
+    rc-update add zfs-mount boot
+    rc-update add zfs-share default
+
+
+  The idea here is to make sure ZED is started before the imports (so that
+  we can start consuming pool events before pools are imported).
+
+  Then import any/all pools (except the root pool which is mounted in the
+  initrd before the system even boots - basically before the S (single-user)
+  mode).
+
+  Then we mount all filesystems before we start any network service (such as
+  NFSd, AFSd, Samba, iSCSI targets and what not). Even if the share* in ZFS
+  isn't used, the filesystem must be mounted for the service to start properly.
+
+  Then, at almost the very end, we share filesystems configured with the
+  share* property in ZFS.
diff --git a/etc/init.d/zfs-functions.in b/etc/init.d/zfs-functions.in
new file mode 100644
index 000000000..17805ebec
--- /dev/null
+++ b/etc/init.d/zfs-functions.in
@@ -0,0 +1,437 @@
+# This is a script with common functions etc used by zfs-import, zfs-mount,
+# zfs-share and zfs-zed.
+#
+# It is _NOT_ to be called independently
+#
+# Released under the 2-clause BSD license.
+#
+# The original script that acted as a template for this script came from
+# the Debian GNU/Linux kFreeBSD ZFS packages (which did not include a
+# licensing stansa) in the commit dated Mar 24, 2011:
+#   https://github.com/zfsonlinux/pkg-zfs/commit/80a3ae582b59c0250d7912ba794dca9e669e605a
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin
+
+# Source function library
+if [ -f /lib/lsb/init-functions ]; then
+	# LSB, Debian GNU/Linux and derivates
+	. /lib/lsb/init-functions
+elif [ -f /etc/rc.d/init.d/functions ]; then
+	# RedHat and derivates
+	. /etc/rc.d/init.d/functions
+elif [ -L /etc/init.d/functions.sh ]; then
+	# Gentoo
+	. /etc/init.d/functions.sh
+fi
+
+# Of course the functions we need are called differently
+# on different distributions - it would be way too easy
+# otherwise!!
+if type log_failure_msg > /dev/null 2>&1 ; then
+	# LSB functions - fall through
+	zfs_log_begin_msg() { log_begin_msg "$1"; }
+	zfs_log_end_msg() { log_end_msg "$1"; }
+	zfs_log_failure_msg() { log_failure_msg "$1"; }
+	zfs_log_progress_msg() { log_progress_msg "$1"; }
+elif type success > /dev/null 2>&1 ; then
+	# Fedora/RedHat functions
+	zfs_set_ifs() {
+		# For some reason, the init function library have a problem
+		# with a changed IFS, so this function goes around that.
+		local tIFS="$1"
+		if [ -n "$tIFS" ]
+		then
+			TMP_IFS="$IFS"
+			IFS="$tIFS"
+		fi
+	}
+
+	zfs_log_begin_msg() { echo -n "$1 "; }
+	zfs_log_end_msg() {
+		zfs_set_ifs "$OLD_IFS"
+		if [ "$1" -eq 0 ]; then
+			success
+		else
+			failure
+		fi
+		echo
+		zfs_set_ifs "$TMP_IFS"
+	}
+	zfs_log_failure_msg() {
+		zfs_set_ifs "$OLD_IFS"
+		failure
+		echo
+		zfs_set_ifs "$TMP_IFS"
+	}
+	zfs_log_progress_msg() { echo -n $"$1"; }
+elif type einfo > /dev/null 2>&1 ; then
+	# Gentoo functions
+	zfs_log_begin_msg() { ebegin "$1"; }
+	zfs_log_end_msg() { eend "$1"; }
+	zfs_log_failure_msg() { eerror "$1"; }
+#	zfs_log_progress_msg() { echo -n "$1"; }
+	zfs_log_progress_msg() { echo -n; }
+else
+	# Unknown - simple substitues.
+	zfs_log_begin_msg() { echo -n "$1"; }
+	zfs_log_end_msg() {
+		ret=$1
+		if [ "$ret" -ge 1 ]; then
+			echo " failed!"
+		else
+			echo " success"
+		fi
+		return "$ret"
+	}
+	zfs_log_failure_msg() { echo "$1"; }
+	zfs_log_progress_msg() { echo -n "$1"; }
+fi
+
+# Paths to what we need
+ZFS="@sbindir@/zfs"
+ZED="@sbindir@/zed"
+ZPOOL="@sbindir@/zpool"
+ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
+
+# Sensible defaults
+ZFS_MOUNT='yes'
+ZFS_UNMOUNT='yes'
+
+export ZFS ZED ZPOOL ZPOOL_CACHE ZFS_MOUNT ZFS_UNMOUNT
+
+# Source zfs configuration, overriding the defaults
+if [ -f @initconfdir@/zfs ]; then
+	. @initconfdir@/zfs
+fi
+
+# ----------------------------------------------------
+
+zfs_action()
+{
+	local MSG="$1";	shift
+	local CMD="$*"
+	local ret
+
+	zfs_log_begin_msg "$MSG "
+	$CMD
+	ret=$?
+	if [ "$ret" -eq 0 ]; then
+		zfs_log_end_msg $ret
+	else
+		zfs_log_failure_msg $ret
+	fi
+
+	return $ret
+}
+
+# Returns
+#   0 if daemon has been started
+#   1 if daemon was already running
+#   2 if daemon could not be started
+#   3 if unsupported
+#
+zfs_daemon_start()
+{
+	local PIDFILE="$1";	shift
+	local DAEMON_BIN="$1";	shift
+	local DAEMON_ARGS="$*"
+
+	if type start-stop-daemon > /dev/null 2>&1 ; then
+		# LSB functions
+		start-stop-daemon --start --quiet --pidfile "$PIDFILE" \
+		    --exec "$DAEMON_BIN" --test > /dev/null || return 1
+
+	        start-stop-daemon --start --quiet --exec "$DAEMON_BIN" -- \
+		    $DAEMON_ARGS || return 2
+
+		# On Debian GNU/Linux, there's a 'sendsigs' script that will
+		# kill basically everything quite early and zed is stopped
+		# much later than that. We don't want zed to be among them,
+		# so add the zed pid to list of pids to ignore.
+		if [ -f "$PIDFILE" -a -d /run/sendsigs.omit.d ]
+		then
+			ln -s "$PIDFILE" /run/sendsigs.omit.d/zed
+		fi
+	elif type daemon > /dev/null 2>&1 ; then
+	        # Fedora/RedHat functions
+		daemon --pidfile "$PIDFILE" "$DAEMON_BIN" $DAEMON_ARGS
+		return $?
+	else
+		# Unsupported
+		return 3
+	fi
+
+	return 0
+}
+
+# Returns
+#   0 if daemon has been stopped
+#   1 if daemon was already stopped
+#   2 if daemon could not be stopped
+#   3 if unsupported
+#
+zfs_daemon_stop()
+{
+	local PIDFILE="$1"
+	local DAEMON_BIN="$2"
+	local DAEMON_NAME="$3"
+
+	if type start-stop-daemon > /dev/null 2>&1 ; then
+		# LSB functions
+		start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 \
+		    --pidfile "$PIDFILE" --name "$DAEMON_NAME"
+		[ "$?" = 0 ] && rm -f "$PIDFILE"
+
+		return $?
+	elif type killproc > /dev/null 2>&1 ; then
+		# Fedora/RedHat functions
+		killproc -p "$PIDFILE" "$DAEMON_NAME"
+		[ "$?" = 0 ] && rm -f "$PIDFILE"
+
+		return $?
+	else
+		# Unsupported
+		return 3
+	fi
+
+	return 0
+}
+
+# Returns status
+zfs_daemon_status()
+{
+	local PIDFILE="$1"
+	local DAEMON_BIN="$2"
+	local DAEMON_NAME="$3"
+
+	if type status_of_proc > /dev/null 2>&1 ; then
+		# LSB functions
+		status_of_proc "$DAEMON_NAME" "$DAEMON_BIN"
+		return $?
+	elif type status > /dev/null 2>&1 ; then
+		# Fedora/RedHat functions
+		status -p "$PIDFILE" "$DAEMON_NAME"
+		return $?
+	else
+		# Unsupported
+		return 3
+	fi
+
+	return 0
+}
+
+zfs_daemon_reload()
+{
+	local PIDFILE="$1"
+	local DAEMON_NAME="$2"
+
+	if type start-stop-daemon > /dev/null 2>&1 ; then
+		# LSB functions
+		start-stop-daemon --stop -signal 1 --quiet \
+		    --pidfile "$PIDFILE" --name "$DAEMON_NAME"
+		return $?
+	elif type killproc > /dev/null 2>&1 ; then
+		# Fedora/RedHat functions
+                killproc -p "$PIDFILE" "$DAEMON_NAME" -HUP
+		return $?
+	else
+		# Unsupported
+		return 3
+	fi
+
+	return 0
+}
+
+zfs_installed()
+{
+	if [ ! -x "$ZPOOL" ]; then
+		return 1
+	else
+		# Test if it works (will catch missing/broken libs etc)
+		"$ZPOOL" -? > /dev/null 2>&1
+		return $?
+	fi
+
+	if [ ! -x "$ZFS" ]; then
+		return 2
+	else
+		# Test if it works (will catch missing/broken libs etc)
+		"$ZFS" -? > /dev/null 2>&1
+		return $?
+	fi
+
+	return 0
+}
+
+# Trigger udev and wait for it to settle.
+udev_trigger()
+{
+	if [ -x /sbin/udevadm ]; then
+		/sbin/udevadm trigger --action=change --subsystem-match=block
+		/sbin/udevadm settle
+	elif [ -x /sbin/udevsettle ]; then
+		/sbin/udevtrigger
+		/sbin/udevsettle
+	fi
+}
+
+# Do a lot of checks to make sure it's 'safe' to continue with the import.
+checksystem()
+{
+	if grep -qiE '(^|[^\\](\\\\)* )zfs=(off|no|0)( |$)' /proc/cmdline;
+	then
+		# Called with zfs=(off|no|0) - bail because we don't
+		# want anything import, mounted or shared.
+		# HOWEVER, only do this if we're called at the boot up
+		# (from init), not if we're running interactivly (as in
+		# from the shell - we know what we're doing).
+		[ -n "$init" ] && exit 3
+	fi
+
+	# Check if ZFS is installed.
+	zfs_installed || return 5
+
+	# Just make sure that /dev/zfs is created.
+	udev_trigger
+
+	if ! [ "$(uname -m)" = "x86_64" ]; then
+		echo "Warning: You're not running 64bit. Currently native zfs in";
+		echo "         Linux is only supported and tested on 64bit.";
+		# should we break here? People doing this should know what they
+		# do, thus i'm not breaking here.
+	fi
+
+	return 0
+}
+
+reregister_mounts()
+{
+	local fs mntpnt fstype opts rest tmpdir
+	tmpdir=removethismountpointhoweverpossible
+
+	while read -r fs mntpnt fstype opts rest ; do
+		fs=$(printf '%b\n' "$fs")
+		mntpnt=$(printf '%b\n' "$mntpnt")
+		if [ "$fstype" = "zfs" ] ; then
+			if [ "$mntpnt" = "/" ] ; then
+				mount -f -o zfsutil -t zfs --move / /$tmpdir
+				umount --fake /$tmpdir
+			else
+				umount --fake "$mntpnt"
+			fi
+		elif echo "$fs" | grep -qE "^/dev/(zd|zvol)" ; then
+			if [ "$mntpnt" = "/" ] ; then
+				mount -f -t "$fstype" --move / /$tmpdir
+				umount --fake /$tmpdir
+			else
+				umount --fake "$mntpnt"
+			fi
+		fi
+	done < /proc/mounts
+
+	while read -r fs mntpnt fstype opts rest ; do
+		fs=$(printf '%b\n' "$fs")
+		mntpnt=$(printf '%b\n' "$mntpnt")
+		if [ "$fstype" = "zfs" ] ; then
+			mount -f -t zfs -o zfsutil "$fs" "$mntpnt"
+		elif echo "$fs" | grep -q "^/dev/zd" ; then
+			mount -f -t "$fstype" -o "$opts" "$fs" "$mntpnt"
+		fi
+	done < /proc/mounts
+}
+
+get_root_pool()
+{
+	set -- $(mount | grep ' on / ')
+	[ "$5" = "zfs" ] && echo "${1%%/*}"
+}
+
+check_module_loaded()
+{
+	[ -r /sys/module/zfs/version ] && return 0 || return 1
+}
+
+load_module()
+{
+	# Load the zfs module stack
+	if ! check_module_loaded; then
+		if ! modprobe zfs; then
+			return 5
+		fi
+	fi
+	return 0
+}
+
+# first parameter is a regular expression that filters mtab
+read_mtab()
+{
+	local match="$1"
+	local fs mntpnt fstype opts rest TMPFILE
+
+	# Unset all MTAB_* variables
+	unset $(env | grep ^MTAB_ | sed 's,=.*,,')
+
+	while read -r fs mntpnt fstype opts rest; do
+		if echo "$fs $mntpnt $fstype $opts" | grep -qE "$match"; then
+			mntpnt=$(printf '%b\n' "$mntpnt" | sed 's,/,_,g')
+			eval export MTAB_$mntpnt="$fs"
+		fi
+	done < /proc/mounts
+}
+
+in_mtab()
+{
+	local fs="$(echo "$1" | sed 's,/,_,g')"
+	local var
+
+	var="$(eval echo MTAB_$fs)"
+	[ "$(eval echo "$""$var")" != "" ]
+	return "$?"
+}
+
+# first parameter is a regular expression that filters fstab
+read_fstab()
+{
+	local match="$1"
+	local i var TMPFILE
+
+	# Unset all FSTAB_* variables
+	unset $(env | grep ^FSTAB_ | sed 's,=.*,,')
+
+	i=0
+	while read -r fs mntpnt fstype opts; do
+		echo "$fs" | egrep -qE '^#|^$' && continue
+
+		if echo "$fs $mntpnt $fstype $opts" | grep -qE "$match"; then
+			eval export FSTAB_dev_$i="$fs"
+			fs=$(printf '%b\n' "$fs" | sed 's,/,_,g')
+			eval export FSTAB_$i="$mntpnt"
+
+			i=$((i + 1))
+		fi
+	done < /etc/fstab
+}
+
+in_fstab()
+{
+	local var
+
+	var="$(eval echo FSTAB_$1)"
+	[ "${var}" != "" ]
+	return $?
+}
+
+is_mounted()
+{
+	local mntpt="$1"
+	local line
+
+	mount | \
+	    while read line; do
+		if echo "$line" | grep -q " on $mntpt "; then
+		    return 0
+		fi
+	    done
+
+	return 1
+}
diff --git a/etc/init.d/zfs-import.in b/etc/init.d/zfs-import.in
new file mode 100755
index 000000000..1bc3ebe9a
--- /dev/null
+++ b/etc/init.d/zfs-import.in
@@ -0,0 +1,338 @@
+#!@SHELL@
+#
+# zfs-import    This script will import/export zfs pools.
+#
+# chkconfig:    2345 01 99
+# description:  This script will import/export zfs pools during system
+#               boot/shutdown.
+#               It is also responsible for all userspace zfs services.
+# probe: true
+#
+### BEGIN INIT INFO
+# Provides:          zfs-import
+# Required-Start:    zfs-zed
+# Required-Stop:     zfs-zed
+# Default-Start:     S
+# Default-Stop:      0 1 6
+# X-Start-Before:    checkfs
+# X-Stop-After:      zfs-mount
+# Short-Description: Import ZFS pools
+# Description: Run the `zpool import` or `zpool export` commands.
+### END INIT INFO
+#
+# Released under the 2-clause BSD license.
+#
+# The original script that acted as a template for this script came from
+# the Debian GNU/Linux kFreeBSD ZFS packages (which did not include a
+# licensing stansa) in the commit dated Mar 24, 2011:
+#   https://github.com/zfsonlinux/pkg-zfs/commit/80a3ae582b59c0250d7912ba794dca9e669e605a
+
+# Source the common init script
+. @sysconfdir@/zfs/zfs-functions
+
+# ----------------------------------------------------
+
+do_depend()
+{
+	after sysfs udev zfs-zed
+	keyword -lxc -openvz -prefix -vserver
+}
+
+# Support function to get a list of all pools, separated with ';'
+find_pools()
+{
+	local CMD="$*"
+	local pools
+
+	pools=$($CMD 2> /dev/null | \
+		grep -E "pool:|^[a-zA-Z0-9]" | \
+		sed 's@.*: @@' | \
+		sort | \
+		while read pool; do \
+		    echo -n "$pool;"
+		done)
+
+	echo "${pools%%;}" # Return without the last ';'.
+}
+
+# Import all pools
+do_import()
+{
+	local already_imported available_pools pool npools
+	local exception dir ZPOOL_IMPORT_PATH RET=0 r=1
+
+	# In case not shutdown cleanly.
+	[ -n "$init" ] && rm -f /etc/dfs/sharetab
+
+	# Just simplify code later on.
+	if [ -n "$USE_DISK_BY_ID" -a "$USE_DISK_BY_ID" != 'yes' ]
+	then
+		# It's something, but not 'yes' so it's no good to us.
+		unset USE_DISK_BY_ID
+	fi
+
+	# Find list of already imported pools.
+	already_imported=$(find_pools "$ZPOOL" list -H -oname)
+	available_pools=$(find_pools "$ZPOOL" import)
+
+	# Just in case - seen it happen (that a pool isn't visable/found
+	# with a simple "zpool import" but only when using the "-d"
+	# option or setting ZPOOL_IMPORT_PATH).
+	if [ -d "/dev/disk/by-id" ]
+	then
+		npools=$(find_pools "$ZPOOL" import -d /dev/disk/by-id)
+		if [ -n "$npools" ]
+		then
+			# Because we have found extra pool(s) here, which wasn't
+			# found 'normaly', we need to force USE_DISK_BY_ID to
+			# make sure we're able to actually import it/them later.
+			USE_DISK_BY_ID='yes'
+
+			# Filter out duplicates (pools found with the simpl
+			# "zpool import" but which is also found with the
+			# "zpool import -d ...").
+			npools=$(echo "$npools" | sed "s,$available_pools,,")
+
+			if [ -n "$available_pools" ]
+			then
+				# Add the list to the existing list of
+				# available pools
+				available_pools="$available_pools;$npools"
+			else
+				available_pools="$npools"
+			fi
+		fi
+	fi
+
+        # Filter out any exceptions...
+	if [ -n "$ZFS_POOL_EXCEPTIONS" ]
+	then
+		local found=""
+		local apools=""
+		OLD_IFS="$IFS" ; IFS=";"
+
+		for pool in $available_pools
+		do
+			for exception in $ZFS_POOL_EXCEPTIONS
+			do
+				[ "$pool" = "$exception" ] && continue 2
+				found="$pool"
+			done
+
+			if [ -n "$found" ]
+			then
+				if [ -n "$apools" ]
+				then
+					apools="$apools;$pool"
+				else
+					apools="$pool"
+				fi
+			fi
+		done
+
+		IFS="$OLD_IFS"
+		available_pools="$apools"
+	fi
+
+	# For backwards compability, make sure that ZPOOL_IMPORT_PATH is set
+	# to something we can use later with the real import(s). We want to
+	# make sure we find all by* dirs, BUT by-vdev should be first (if it
+	# exists).
+	if [ -n "$USE_DISK_BY_ID" -a -z "$ZPOOL_IMPORT_PATH" ]
+	then
+		local dirs
+		dirs="$(find /dev/disk/by-* -maxdepth 0 -type d | \
+			grep -v by-vdev)"
+		dirs="$(echo "$dirs" | sed 's, ,:,g')"
+		if [ -d "/dev/disk/by-vdev" ]
+		then
+			# Add by-vdev at the beginning.
+			ZPOOL_IMPORT_PATH="/dev/disk/by-vdev:"
+		fi
+		ZPOOL_IMPORT_PATH="$ZPOOL_IMPORT_PATH$dirs:/dev"
+	fi
+
+	# Needs to be exported for "zpool" to catch it.
+	[ -n "$ZPOOL_IMPORT_PATH" ] && export ZPOOL_IMPORT_PATH
+
+	# Mount all availible pools (except those set in ZFS_POOL_EXCEPTIONS.
+	#
+	# If not interactive (run from init - variable init='/sbin/init')
+	# we get ONE line for all pools being imported, with just a dot
+	# as status for each pool.
+	# Example: Importing ZFS pool(s)...                             [OK]
+	#
+	# If it IS interactive (started from the shell manually), then we
+	# get one line per pool importing.
+	# Example: Importing ZFS pool pool1                             [OK]
+	#          Importing ZFS pool pool2                             [OK]
+	#          [etc]
+	[ -n "$init" ] && zfs_log_begin_msg "Importing ZFS pool(s)"
+	OLD_IFS="$IFS" ; IFS=";"
+	for pool in $available_pools
+	do
+		[ -z "$pool" ] && continue
+
+		# We have pools that haven't been imported - import them
+		if [ -n "$init" ]
+		then
+			# Not interactive - a dot for each pool.
+			# Except on Gentoo where this doesn't work.
+			zfs_log_progress_msg "."
+		else
+			# Interactive - one 'Importing ...' line per pool
+			zfs_log_begin_msg "Importing ZFS pool $pool"
+		fi
+
+		# Import by using ZPOOL_IMPORT_PATH (either set above or in
+		# the config file) _or_ with the 'built in' default search
+		# paths. This is the prefered way.
+		"$ZPOOL" import -N "$pool" 2> /dev/null
+		r="$?" ; RET=$((RET + r))
+		if [ "$r" -eq 0 ]
+		then
+			# Output success and process the next pool
+			[ -z "$init" ] && zfs_log_end_msg 0
+			continue
+		fi
+		# We don't want a fail msg here, we're going to try import
+		# using the cache file soon and that might succeed.
+		[ ! -f "$ZPOOL_CACHE" ] && zfs_log_end_msg "$RET"
+
+		if [ "$r" -gt 0 -a -f "$ZPOOL_CACHE" ]
+		then
+			# Failed to import without a cache file. Try WITH...
+			if [ -z "$init" -a "$VERBOSE_MOUNT" = 'yes' ]
+			then
+				# Interactive + Verbose = more information
+				zfs_log_progress_msg " using cache file"
+			fi
+
+			"$ZPOOL" import -c "$ZPOOL_CACHE" -N "$pool" 2> /dev/null
+			r="$?" ; RET=$((RET + r))
+			if [ "$r" -eq 0 ]
+			then
+				[ -z "$init" ] && zfs_log_end_msg 0
+				continue 3 # Next pool
+			fi
+			zfs_log_end_msg "$RET"
+		fi
+	done
+	[ -n "$init" ] && zfs_log_end_msg "$RET"
+
+	IFS="$OLD_IFS"
+	[ -n "$already_imported" -a -z "$available_pools" ] && return 0
+
+	return "$RET"
+}
+
+# Export all pools
+do_export()
+{
+	local pool root_pool RET r
+	RET=0
+
+	root_pool=$(get_root_pool)
+
+	[ -n "$init" ] && zfs_log_begin_msg "Exporting ZFS pool(s)"
+	TMPFILE=$(mktemp --tmpdir=/var/tmp zpool.XXXXX)
+	"$ZPOOL" list -H -oname > "$TMPFILE"
+	while read pool; do
+		[ "$pool" = "$root_pool" ] && continue
+
+		if [ -z "$init" ]
+		then
+			# Interactive - one 'Importing ...' line per pool
+			zfs_log_begin_msg "Exporting ZFS pool $pool"
+		else
+			# Not interactive - a dot for each pool.
+			zfs_log_progress_msg "."
+		fi
+
+		"$ZPOOL" export "$pool"
+		r="$?" ; RET=$((RET + r))
+		[ -z "$init" ] && zfs_log_end_msg "$r"
+	done < "$TMPFILE"
+	rm -f "$TMPFILE"
+	[ -n "$init" ] && zfs_log_end_msg "$RET"
+}
+
+# Output the status and list of pools
+do_status()
+{
+	check_module_loaded || exit 0
+
+	"$ZPOOL" status && echo "" && "$ZPOOL" list
+}
+
+do_start()
+{
+	if [ "$VERBOSE_MOUNT" = 'yes' ]
+	then
+	    zfs_log_begin_msg "Checking if ZFS userspace tools present"
+	fi
+
+	if checksystem
+	then
+		[ "$VERBOSE_MOUNT" = 'yes' ] && zfs_log_end_msg 0
+
+		if [ "$VERBOSE_MOUNT" = 'yes' ]
+		then
+		    zfs_log_begin_msg "Loading kernel ZFS infrastructure"
+		fi
+
+		if ! load_module
+		then
+			[ "$VERBOSE_MOUNT" = 'yes' ] && zfs_log_end_msg 1
+			return 5
+		fi
+		[ "$VERBOSE_MOUNT" = 'yes' ] && zfs_log_end_msg 0
+
+		do_import && udev_trigger # just to make sure we get zvols.
+
+		return 0
+	else
+		return 1
+	fi
+}
+
+do_stop()
+{
+	# Check to see if the module is even loaded.
+	check_module_loaded || exit 0
+
+	do_export
+}
+
+# ----------------------------------------------------
+
+if [ ! -e /etc/gentoo-release ]
+then
+	case "$1" in
+		start)
+			do_start
+			;;
+		stop)
+			do_stop
+			;;
+		status)
+			do_status
+			;;
+		force-reload|condrestart|reload|restart)
+			# no-op
+			;;
+		*)
+			[ -n "$1" ] && echo "Error: Unknown command $1."
+			echo "Usage: $0 {start|stop|status}"
+			exit 3
+			;;
+	esac
+
+	exit $?
+else
+	# Create wrapper functions since Gentoo don't use the case part.
+	depend() { do_depend; }
+	start() { do_start; }
+	stop() { do_stop; }
+	status() { do_status; }
+fi
diff --git a/etc/init.d/zfs-mount.in b/etc/init.d/zfs-mount.in
new file mode 100755
index 000000000..e108cb153
--- /dev/null
+++ b/etc/init.d/zfs-mount.in
@@ -0,0 +1,225 @@
+#!@SHELL@
+#
+# zfs-mount     This script will mount/umount the zfs filesystems.
+#
+# chkconfig:    2345 06 99
+# description:  This script will mount/umount the zfs filesystems during
+#               system boot/shutdown. Configuration of which filesystems
+#               should be mounted is handled by the zfs 'mountpoint' and
+#               'canmount' properties. See the zfs(8) man page for details.
+#               It is also responsible for all userspace zfs services.
+# probe: true
+#
+### BEGIN INIT INFO
+# Provides:          zfs-mount
+# Required-Start:    $local_fs zfs-import
+# Required-Stop:     $local_fs zfs-import
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# X-Stop-After:      zfs-share
+# Short-Description: Mount ZFS filesystems and volumes
+# Description: Run the `zfs mount -a` or `zfs umount -a` commands.
+### END INIT INFO
+#
+# Released under the 2-clause BSD license.
+#
+# The original script that acted as a template for this script came from
+# the Debian GNU/Linux kFreeBSD ZFS packages (which did not include a
+# licensing stansa) in the commit dated Mar 24, 2011:
+#   https://github.com/zfsonlinux/pkg-zfs/commit/80a3ae582b59c0250d7912ba794dca9e669e605a
+
+# Source the common init script
+. @sysconfdir@/zfs/zfs-functions
+
+# ----------------------------------------------------
+
+do_depend()
+{
+	after procfs zfs-import sysfs procps
+	use mtab
+	keyword -lxc -openvz -prefix -vserver
+}
+
+# Mount all datasets/filesystems
+do_mount()
+{
+	local verbose overlay i mntpt val
+
+	[ "$VERBOSE_MOUNT" = 'yes' ] && verbose=v
+	[ "$OVERLAY_MOUNTS" = 'yes' ] && overlay=O
+
+	zfs_action "Mounting ZFS filesystem(s)" \
+	    "$ZFS" mount -a$verbose$overlay "$MOUNT_EXTRA_OPTIONS"
+
+	# Require each volume/filesytem to have 'noauto' and no fsck
+	# option. This shouldn't really be necessary, as long as one
+	# can get zfs-import to run sufficiently early on in the boot
+	# process - before local mounts. This is just here in case/if
+	# this isn't possible.
+	[ "$VERBOSE_MOUNT" = 'yes' ] && \
+	    zfs_log_begin_msg "Mounting volumes and filesystems registered in fstab"
+
+	read_mtab  "^/dev/(zd|zvol)"
+	read_fstab "^/dev/(zd|zvol)"
+	i=0; var=$(eval echo FSTAB_$i)
+	while [ -n "$(eval echo "$""$var")" ]
+	do
+		mntpt=$(eval echo "$""$var")
+		dev=$(eval echo "$"FSTAB_dev_$i)
+		if ! in_mtab "$mntpt" && ! is_mounted "$mntpt" && [ -e "$dev" ]
+		then
+			[ "$VERBOSE_MOUNT" = 'yes' ] && \
+				zfs_log_progress_msg "$mntpt "
+			fsck "$dev" && mount "$mntpt"
+		fi
+
+		i=$((i + 1))
+		var=$(eval echo FSTAB_$i)
+	done
+
+	read_mtab  "[[:space:]]zfs[[:space:]]"
+	read_fstab "[[:space:]]zfs[[:space:]]"
+	i=0; var=$(eval echo FSTAB_$i)
+	while [ -n "$(eval echo "$""$var")" ]
+	do
+		mntpt=$(eval echo "$""$var")
+		if ! in_mtab "$mntpt" && ! is_mounted "$mntpt"
+		then
+			[ "$VERBOSE_MOUNT" = 'yes' ] && \
+				zfs_log_progress_msg "$mntpt "
+			mount "$mntpt"
+		fi
+
+		i=$((i + 1))
+		var=$(eval echo FSTAB_$i)
+	done
+	[ "$VERBOSE_MOUNT" = 'yes' ] && zfs_log_end_msg 0
+
+	return 0
+}
+
+# Unmount all filesystems
+do_unmount()
+{
+	local i var mntpt
+
+	# This shouldn't really be necessary, as long as one can get
+	# zfs-import to run sufficiently late in the shutdown/reboot process
+	# - after unmounting local filesystems. This is just here in case/if
+	# this isn't possible.
+	zfs_action "Unmounting ZFS filesystems" "$ZFS" unmount -a
+
+	[ "$VERBOSE_MOUNT" = 'yes' ] && \
+	    zfs_log_begin_msg "Unmounting volumes and filesystems registered in fstab"
+
+	read_mtab  "^/dev/(zd|zvol)"
+	read_fstab "^/dev/(zd|zvol)"
+	i=0; var=$(eval echo FSTAB_$i)
+	while [ -n "$(eval echo "$""$var")" ]
+	do
+		mntpt=$(eval echo "$""$var")
+		dev=$(eval echo "$"FSTAB_dev_$i)
+		if in_mtab "$mntpt"
+		then
+			[ "$VERBOSE_MOUNT" = 'yes' ] && \
+				zfs_log_progress_msg "$mntpt "
+			umount "$mntpt"
+		fi
+
+		i=$((i + 1))
+		var=$(eval echo FSTAB_$i)
+	done
+
+	read_mtab  "[[:space:]]zfs[[:space:]]"
+	read_fstab "[[:space:]]zfs[[:space:]]"
+	i=0; var=$(eval echo FSTAB_$i)
+	while [ -n "$(eval echo "$""$var")" ]
+	do
+		mntpt=$(eval echo "$""$var")
+		if in_mtab "$mntpt"; then
+			[ "$VERBOSE_MOUNT" = 'yes' ] && \
+			    zfs_log_progress_msg "$mntpt "
+			umount "$mntpt"
+		fi
+
+		i=$((i + 1))
+		var=$(eval echo FSTAB_$i)
+	done
+	[ "$VERBOSE_MOUNT" = 'yes' ] && zfs_log_end_msg 0
+
+	return 0
+}
+
+do_start()
+{
+	check_module_loaded || exit 0
+
+	# fix mtab to include already-mounted fs filesystems, in case there are any
+	# we ONLY do this if mtab does not point to /proc/mounts
+	# which is the case in some systems (systemd may bring that soon)
+	if ! readlink /etc/mtab | grep -q /proc ; then
+		if grep -qE "(^/dev/zd|^/dev/zvol| zfs )" /proc/mounts ; then
+			zfs_action "Registering already-mounted ZFS filesystems and volumes" \
+			    reregister_mounts
+		fi
+	fi
+
+	# Ensure / exists in /etc/mtab, if not update mtab accordingly.
+	# This should be handled by rc.sysinit but lets be paranoid.
+	awk '$2 = "/" { exit 1 }' /etc/mtab
+	RETVAL=$?
+	if [ "$RETVAL" -eq 0 ]
+	then
+		mount -f /
+	fi
+
+	case "$ZFS_MOUNT" in
+		[Oo][Ff][Ff]|[Nn][Oo]|''|0)
+			exit 3
+			;;
+	esac
+
+	do_mount
+}
+
+do_stop()
+{
+	case "$ZFS_UNMOUNT" in
+		[Oo][Ff][Ff]|[Nn][Oo]|''|0)
+			exit 0
+			;;
+	esac
+
+	check_module_loaded || exit 0
+
+	do_unmount
+}
+
+# ----------------------------------------------------
+
+if [ ! -e /etc/gentoo-release ]
+then
+	case "$1" in
+		start)
+			do_start
+			;;
+		stop)
+			do_stop
+			;;
+		force-reload|condrestart|reload|restart|status)
+			# no-op
+			;;
+		*)
+			[ -n "$1" ] && echo "Error: Unknown command $1."
+			echo "Usage: $0 {start|stop}"
+			exit 3
+			;;
+	esac
+
+	exit $?
+else
+	# Create wrapper functions since Gentoo don't use the case part.
+	depend() { do_depend; }
+	start() { do_start; }
+	stop() { do_stop; }
+fi
diff --git a/etc/init.d/zfs-share.in b/etc/init.d/zfs-share.in
new file mode 100755
index 000000000..70439151b
--- /dev/null
+++ b/etc/init.d/zfs-share.in
@@ -0,0 +1,93 @@
+#!@SHELL@
+#
+# zfs-share     This script will network share zfs filesystems and volumes.
+#
+# chkconfig:    2345 30 99
+# description:  Run the `zfs share -a` or `zfs unshare -a` commands
+#               for controlling iSCSI, NFS, or CIFS network shares.
+# probe: true
+#
+### BEGIN INIT INFO
+# Provides:          zfs-share
+# Required-Start:    $local_fs $network $remote_fs zfs-mount
+# Required-Stop:     $local_fs $network $remote_fs zfs-mount
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Should-Start:      iscsi iscsitarget istgt scst @NFS_SRV@ samba samba4 zfs-mount
+# Should-Stop:       iscsi iscsitarget istgt scst @NFS_SRV@ samba samba4 zfs-mount
+# Short-Description: Network share ZFS datasets and volumes.
+# Description:       Run the `zfs share -a` or `zfs unshare -a` commands
+#                    for controlling iSCSI, NFS, or CIFS network shares.
+### END INIT INFO
+#
+# Released under the 2-clause BSD license.
+#
+# The original script that acted as a template for this script came from
+# the Debian GNU/Linux kFreeBSD ZFS packages (which did not include a
+# licensing stansa) in the commit dated Mar 24, 2011:
+#   https://github.com/zfsonlinux/pkg-zfs/commit/80a3ae582b59c0250d7912ba794dca9e669e605a
+
+# Source the common init script
+. @sysconfdir@/zfs/zfs-functions
+
+# ----------------------------------------------------
+
+do_depend()
+{
+	after sysfs zfs-mount
+	keyword -lxc -openvz -prefix -vserver
+}
+
+do_start()
+{
+	case "$ZFS_SHARE" in
+		[Oo][Ff][Ff]|[Nn][Oo]|''|0)
+			exit 0
+			;;
+	esac
+
+	check_module_loaded || exit 0
+
+	zfs_action "Sharing ZFS filesystems" "$ZFS" share -a
+}
+
+do_stop()
+{
+	case "$ZFS_UNSHARE" in
+		[Oo][Ff][Ff]|[Nn][Oo]|''|0)
+			exit 0
+			;;
+	esac
+
+	check_module_loaded || exit 0
+
+	zfs_action "Unsharing ZFS filesystems" "$ZFS" unshare -a
+}
+
+# ----------------------------------------------------
+
+if [ ! -e /etc/gentoo-release ]; then
+	case "$1" in
+		start)
+			do_start
+			;;
+		stop)
+			do_stop
+			;;
+		force-reload|reload|restart|status)
+			# no-op
+			;;
+		*)
+			[ -n "$1" ] && echo "Error: Unknown command $1."
+			echo "Usage: $0 {start|stop}"
+			exit 3
+			;;
+	esac
+
+	exit $?
+else
+	# Create wrapper functions since Gentoo don't use the case part.
+	depend() { do_depend; }
+	start() { do_start; }
+	stop() { do_stop; }
+fi
diff --git a/etc/init.d/zfs-zed.in b/etc/init.d/zfs-zed.in
new file mode 100755
index 000000000..1458387f5
--- /dev/null
+++ b/etc/init.d/zfs-zed.in
@@ -0,0 +1,148 @@
+#!@SHELL@
+#
+# zfs-zed
+#
+# chkconfig:    2345 01 99
+# description:  This script will start and stop the ZFS Event Daemon.
+# probe: true
+#
+### BEGIN INIT INFO
+# Provides:          zfs-zed
+# Required-Start:    mtab
+# Required-Stop:     $local_fs mtab
+# Default-Start:     S
+# Default-Stop:      0 1 6
+# X-Start-Before:    checkfs
+# X-Stop-After:      zfs-import
+# Short-Description: ZFS Event Daemon
+# Description:       zed monitors ZFS events. When a zevent is posted, zed
+#                    will run any scripts that have been enabled for the
+#                    corresponding zevent class.
+### END INIT INFO
+#
+# NOTE: Not having '$local_fs' on Required-Start but only on Required-Stop
+#       is on purpose. If we have '$local_fs' in both (and X-Start-Before=checkfs)
+#       we get conflicts - zed and import needs to be started extremely early,
+#       but not stopped too late.
+#
+# Released under the 2-clause BSD license.
+#
+# The original script that acted as a template for this script came from
+# the Debian GNU/Linux kFreeBSD ZFS packages (which did not include a
+# licensing stansa) in the commit dated Mar 24, 2011:
+#   https://github.com/zfsonlinux/pkg-zfs/commit/80a3ae582b59c0250d7912ba794dca9e669e605a
+
+# Source the common init script
+. @sysconfdir@/zfs/zfs-functions
+
+ZED_NAME="zed"
+ZED_PIDFILE="@runstatedir@/$ZED_NAME.pid"
+
+# Exit if the package is not installed
+[ -x "$ZED" ] || exit 0
+
+# ----------------------------------------------------
+
+do_depend()
+{
+	# Try to allow people to mix and match fstab with ZFS in a way that makes sense.
+	if [ "$(mountinfo -s /)" = 'zfs' ]
+	then
+		before localmount
+	else
+		after localmount
+	fi
+
+	# bootmisc will log to /var which may be a different zfs than root.
+	before bootmisc logger zfs-import
+	after sysfs
+}
+
+do_start()
+{
+	check_module_loaded || exit 0
+
+	ZED_ARGS="$ZED_ARGS -p $ZED_PIDFILE"
+
+	zfs_action "Starting ZFS Event Daemon" zfs_daemon_start \
+	    "$ZED_PIDFILE" "$ZED" "$ZED_ARGS"
+	return "$?"
+}
+
+do_stop()
+{
+	local pools RET
+	check_module_loaded || exit 0
+
+	zfs_action "Stopping ZFS Event Daemon" zfs_daemon_stop \
+	   "$ZED_PIDFILE" "$ZED" "$ZED_NAME"
+	if [ "$?" -eq "0" ]
+	then
+		# Let's see if we have any pools imported
+		pools=$("$ZPOOL" list -H -oname)
+		if [ -z "$pools" ]
+		then
+			# No pools imported, it is/should be safe/possible to
+			# unload modules.
+			zfs_action "Unloading modules" rmmod zfs zunicode \
+			    zavl zcommon znvpair spl
+			return "$?"
+		fi
+	else
+		return "$?"
+	fi
+}
+
+do_status()
+{
+	check_module_loaded || exit 0
+
+	zfs_daemon_status "$ZED_PIDFILE" "$ZED" "$ZED_NAME"
+	return "$?"
+}
+
+do_reload()
+{
+	check_module_loaded || exit 0
+
+	zfs_action "Reloading ZFS Event Daemon" zfs_daemon_reload \
+	    "$ZED_PIDFILE" "$ZED_NAME"
+	return "$?"
+}
+
+# ----------------------------------------------------
+
+if [ ! -e /etc/gentoo-release ]; then
+	case "$1" in
+		start)
+			do_start
+			;;
+		stop)
+			do_stop
+			;;
+		status)
+			do_status
+			;;
+		reload|force-reload)
+			do_reload
+			;;
+		restart)
+			do_stop
+			do_start
+			;;
+		*)
+			[ -n "$1" ] && echo "Error: Unknown command $1."
+			echo "Usage: $0 {start|stop|status|reload|restart}"
+			exit 1
+			;;
+	esac
+
+	exit $?
+else
+	# Create wrapper functions since Gentoo don't use the case part.
+	depend() { do_depend; }
+	start() { do_start; }
+	stop() { do_stop; }
+	status() { do_status; }
+	reload() { do_reload; }
+fi
diff --git a/etc/init.d/zfs.fedora.in b/etc/init.d/zfs.fedora.in
deleted file mode 100644
index 86f430dce..000000000
--- a/etc/init.d/zfs.fedora.in
+++ /dev/null
@@ -1,243 +0,0 @@
-#!/bin/bash
-#
-# zfs           This script will mount/umount the zfs filesystems.
-#
-# chkconfig:    2345 01 99
-# description:  This script will mount/umount the zfs filesystems during
-#               system boot/shutdown.  Configuration of which filesystems
-#               should be mounted is handled by the zfs 'mountpoint' and
-#               'canmount' properties.  See the zfs(8) man page for details.
-#               It is also responsible for all userspace zfs services.
-#
-### BEGIN INIT INFO
-# Provides: zfs
-# Required-Start:
-# Required-Stop:
-# Should-Start:
-# Should-Stop:
-# Default-Start: 2 3 4 5
-# Default-Stop: 1
-# Short-Description: Mount/umount the zfs filesystems
-# Description: ZFS is an advanced filesystem designed to simplify managing
-#              and protecting your data.  This service mounts the ZFS
-#              filesystems and starts all related zfs services.
-### END INIT INFO
-
-export PATH=/usr/local/sbin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin
-
-if [ -z "$init" ]; then
-    # Not interactive
-    grep -qE '(^|[^\\](\\\\)* )zfs=(off|no)( |$)' /proc/cmdline && exit 3
-fi
-
-# Source function library & LSB routines
-. /etc/rc.d/init.d/functions
-
-# script variables
-RETVAL=0
-ZFS="@sbindir@/zfs"
-ZPOOL="@sbindir@/zpool"
-ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
-servicename=zfs
-LOCKFILE=/var/lock/subsys/$servicename
-
-# functions
-zfs_installed() {
-	modinfo zfs > /dev/null 2>&1 || return 5
-	$ZPOOL  > /dev/null 2>&1
-	[ $? == 127 ] && return 5
-	$ZFS    > /dev/null 2>&1
-	[ $? == 127 ] && return 5
-	return 0
-}
-
-reregister_mounts() {
-	cat /etc/mtab | while read -r fs mntpnt fstype opts rest ; do
-		fs=`printf '%b\n' "$fs"`
-		mntpnt=`printf '%b\n' "$mntpnt"`
-		if [ "$fstype" == "zfs" ] ; then
-			if [ "$mntpnt" == "/" ] ; then
-				mount -f -o zfsutil -t zfs --move / /removethismountpointhoweverpossible
-				umount --fake /removethismountpointhoweverpossible
-			else
-				umount --fake "$mntpnt"
-			fi
-		elif echo "$fs" | grep -q "^/dev/zd" ; then
-			if [ "$mntpnt" == "/" ] ; then
-				mount -f -t "$fstype" --move / /removethismountpointhoweverpossible
-				umount --fake /removethismountpointhoweverpossible
-			else
-				umount --fake "$mntpnt"
-			fi
-		fi
-	done
-	cat /proc/mounts | while read -r fs mntpnt fstype opts rest ; do
-		fs=`printf '%b\n' "$fs"`
-		mntpnt=`printf '%b\n' "$mntpnt"`
-		if [ "$fstype" == "zfs" ] ; then
-			mount -f -t zfs -o zfsutil "$fs" "$mntpnt"
-		elif echo "$fs" | grep -q "^/dev/zd" ; then
-			mount -f -t "$fstype" -o "$opts" "$fs" "$mntpnt"
-		fi
-	done
-}
-
-# i need a bash guru to simplify this, since this is copy and paste, but donno how
-# to correctly dereference variable names in bash, or how to do this right
-
-declare -A MTAB
-declare -A FSTAB
-
-# first parameter is a regular expression that filters mtab
-read_mtab() {
-        for fs in "${!MTAB[@]}" ; do unset MTAB["$fs"] ; done
-        while read -r fs mntpnt fstype opts blah ; do
-                fs=`printf '%b\n' "$fs"`
-                MTAB["$fs"]=$mntpnt
-        done < <(grep "$1" /etc/mtab)
-}
-
-in_mtab() {
-        [ "${MTAB[$1]}" != "" ]
-        return $?
-}
-
-# first parameter is a regular expression that filters fstab
-read_fstab() {
-        for fs in "${!FSTAB[@]}" ; do unset FSTAB["$fs"] ; done
-        while read -r fs mntpnt fstype opts blah ; do
-                fs=`printf '%b\n' "$fs"`
-                FSTAB["$fs"]=$mntpnt
-        done < <(grep "$1" /etc/fstab)
-}
-
-in_fstab() {
-        [ "${FSTAB[$1]}" != "" ]
-        return $?
-}
-
-start()
-{
-	if [ -f "$LOCKFILE" ] ; then return 0 ; fi
-
-	# check if ZFS is installed.  If not, comply to FC standards and bail
-	zfs_installed || {
-		action $"Checking if ZFS is installed: not installed" /bin/false
-		return 5
-	}
-
-	# Delay until all required block devices are present.
-	udevadm settle
-
-	# load kernel module infrastructure
-	if ! grep -q zfs /proc/modules ; then
-		action $"Loading kernel ZFS infrastructure: " modprobe zfs || return 5
-	fi
-
-	# fix mtab to include already-mounted fs filesystems, in case there are any
-	# we ONLY do this if mtab does not point to /proc/mounts
-	# which is the case in some systems (systemd may bring that soon)
-	if ! readlink /etc/mtab | grep -q /proc ; then
-		if grep -qE "(^/dev/zd| zfs )" /proc/mounts ; then
-			action $"Registering already-mounted ZFS filesystems and volumes: " reregister_mounts || return 150
-		fi
-	fi
-
-        if [ -f $ZPOOL_CACHE ] ; then
-
-		echo -n $"Importing ZFS pools not yet imported: "
-		$ZPOOL import -c $ZPOOL_CACHE -aN || true # stupid zpool will fail if all pools are already imported
-		RETVAL=$?
-		if [ $RETVAL -ne 0 ]; then
-			failure "Importing ZFS pools not yet imported: "
-			return 151
-		fi
-		success "Importing ZFS pools not yet imported: "
-
-	fi
-
-	action $"Mounting ZFS filesystems not yet mounted: " $ZFS mount -a || return 152
-
-	action $"Exporting ZFS filesystems: " $ZFS share -a || return 153
-
-	read_mtab  "^/dev/zd"
-	read_fstab "^/dev/zd"
-
-	template=$"Mounting volume %s registered in fstab: "
-	for volume in "${!FSTAB[@]}" ; do
-		if in_mtab "$volume" ; then continue ; fi
-		string=`printf "$template" "$volume"`
-		action "$string" mount "$volume"
-	done
-
-	touch "$LOCKFILE"
-}
-
-stop()
-{
-	if [ ! -f "$LOCKFILE" ] ; then return 0 ; fi
-
-	# check if ZFS is installed.  If not, comply to FC standards and bail
-	zfs_installed || {
-		action $"Checking if ZFS is installed: not installed" /bin/false
-		return 5
-	}
-
-	# the poweroff of the system takes care of this
-	# but it never unmounts the root filesystem itself
-	# shit
-
-	action $"Syncing ZFS filesystems: " sync
-	     # about the only thing we can do, and then we
-	     # hope that the umount process will succeed
-	     # unfortunately the umount process does not dismount
-	     # the root file system, there ought to be some way
-	     # we can tell zfs to just flush anything in memory
-	     # when a request to remount,ro comes in
-
-	#echo -n $"Unmounting ZFS filesystems: "
-	#$ZFS umount -a
-	#RETVAL=$?
-	#if [ $RETVAL -ne 0 ]; then
-	#	failure
-
-	#	return 8
-	#fi
-	#success
-
-	rm -f "$LOCKFILE"
-}
-
-# See how we are called
-case "$1" in
-	start)
-		start
-		RETVAL=$?
-		;;
-	stop)
-		stop
-		RETVAL=$?
-		;;
-	status)
-		lsmod | grep -q zfs || RETVAL=3
-		$ZPOOL status && echo && $ZFS list || {
-			[ -f "$LOCKFILE" ] && RETVAL=2 || RETVAL=4
-		}
-		;;
-	restart)
-		stop
-		start
-		;;
-	condrestart)
-		if [ -f "$LOCKFILE" ] ; then
-			stop
-			start
-		fi
-		;;
-	*)
-		echo $"Usage: $0 {start|stop|status|restart|condrestart}"
-		RETVAL=3
-		;;
-esac
-
-exit $RETVAL
diff --git a/etc/init.d/zfs.gentoo.in b/etc/init.d/zfs.gentoo.in
deleted file mode 100644
index 07fce01ba..000000000
--- a/etc/init.d/zfs.gentoo.in
+++ /dev/null
@@ -1,124 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
-# Released under the 2-clause BSD license.
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/zfs/files/zfs,v 0.9 2011/04/30 10:13:43 devsk Exp $
-
-if [ -z "$init" ]; then
-    # Not interactive
-    grep -qE '(^|[^\\](\\\\)* )zfs=(off|no)( |$)' /proc/cmdline && exit 3
-fi
-
-depend()
-{
-	# Try to allow people to mix and match fstab with ZFS in a way that makes sense.
-	if [ "$(mountinfo -s /)" = 'zfs' ]
-	then
-		before localmount
-	else
-		after localmount
-	fi
-
-	# bootmisc will log to /var which may be a different zfs than root.
-	before bootmisc logger
-	use mtab
-	keyword -lxc -openvz -prefix -vserver
-}
-
-ZFS="@sbindir@/zfs"
-ZPOOL="@sbindir@/zpool"
-ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
-ZFS_MODULE=zfs
-
-checksystem() {
-	if [ ! -c /dev/zfs ]; then
-		einfo "Checking if ZFS modules present"
-		if ! modinfo zfs > /dev/null 2>&1 ; then
-			eerror "$ZFS_MODULE not found. Is the ZFS package installed?"
-			return 1
-		fi
-	fi
-	einfo "Checking if zfs userspace tools present"
-		if [ ! -x $ZPOOL ]; then
-			eerror "$ZPOOL binary not found."
-			return 1
-		fi
-		if [ ! -x $ZFS ]; then
-			eerror "$ZFS binary not found."
-			return 1
-		fi
-	return 0
-}
-
-start() {
-	ebegin "Starting ZFS"
-	checksystem || return 1
-
-	# Delay until all required block devices are present.
-	udevadm settle
-
-	if [ ! -c /dev/zfs ]; then
-		modprobe $ZFS_MODULE
-		rv=$?
-		if [ $rv -ne 0 ]; then
-			eerror "Failed to load the $ZFS_MODULE module, check 'dmesg|tail'."
-			eend $rv
-			return $rv
-		fi
-	fi
-
-	# Import all pools described by the cache file, and then mount
-	# all filesystem based on their properties.
-	if [ -f $ZPOOL_CACHE ]; then
-		einfo "Importing ZFS pools"
-		# as per fedora script, import can fail if all pools are already imported
-		# The check for $rv makes no sense...but someday, it will work right.
-		$ZPOOL import -c $ZPOOL_CACHE -aN 2>/dev/null || true
-		rv=$?
-		if [ $rv -ne 0 ]; then
-			eerror "Failed to import not-yet imported pools."
-			eend $rv
-			return $rv
-		fi
-	fi
-
-	einfo "Mounting ZFS filesystems"
-	$ZFS mount -a
-	rv=$?
-	if [ $rv -ne 0 ]; then
-		eerror "Failed to mount ZFS filesystems."
-		eend $rv
-		return $rv
-	fi
-
-	einfo "Exporting ZFS filesystems"
-	$ZFS share -a
-	rv=$?
-	if [ $rv -ne 0 ]; then
-		eerror "Failed to export ZFS filesystems."
-		eend $rv
-		return $rv
-	fi
-
-	eend 0
-	return 0
-}
-
-stop()
-{
-	ebegin "Unmounting ZFS filesystems"
-	$ZFS umount -a
-	rv=$?
-	if [ $rv -ne 0 ]; then
-		einfo "Some ZFS filesystems not unmounted"
-	fi
-
-	# Don't fail if we couldn't umount everything.  /usr might be in use.
-	eend 0
-	return 0
-}
-
-status()
-{
-	# show pool status and list
-	$ZPOOL status && echo && $ZPOOL list
-}
diff --git a/etc/init.d/zfs.in b/etc/init.d/zfs.in
new file mode 100644
index 000000000..d81abfef5
--- /dev/null
+++ b/etc/init.d/zfs.in
@@ -0,0 +1,82 @@
+# ZoL userland configuration.
+
+# Run `zfs mount -a` during system start?
+ZFS_MOUNT='yes'
+
+# Run `zfs unmount -a` during system stop?
+ZFS_UNMOUNT='yes'
+
+# Run `zfs share -a` during system start?
+# nb: The shareiscsi, sharenfs, and sharesmb dataset properties.
+ZFS_SHARE='yes'
+
+# Run `zfs unshare -a` during system stop?
+ZFS_UNSHARE='yes'
+
+# Specify specific path(s) to look for device nodes and/or links for the
+# pool import(s). See zpool(8) for more information about this variable.
+# It supersedes the old USE_DISK_BY_ID which indicated that it would only
+# try '/dev/disk/by-id'.
+# The old variable will still work in the code, but is deprecated.
+#ZPOOL_IMPORT_PATH="/dev/disk/by-vdev:/dev/disk/by-id"
+
+# Should the datasets be mounted verbosely?
+# A mount counter will be used when mounting if set to 'yes'.
+VERBOSE_MOUNT='no'
+
+# Should we allow overlay mounts?
+# This is standard in Linux, but not ZFS which comes from Solaris where this
+# is not allowed).
+DO_OVERLAY_MOUNTS='no'
+
+# Any additional option to the 'zfs mount' command line?
+# Include '-o' for each option wanted.
+MOUNT_EXTRA_OPTIONS=""
+
+# Build kernel modules with the --enable-debug switch?
+# Only applicable for Debian GNU/Linux {dkms,initramfs}.
+ZFS_DKMS_ENABLE_DEBUG='no'
+
+# Build kernel modules with the --enable-debug-dmu-tx switch?
+# Only applicable for Debian GNU/Linux {dkms,initramfs}.
+ZFS_DKMS_ENABLE_DEBUG_DMU_TX='no'
+
+# Keep debugging symbols in kernel modules?
+# Only applicable for Debian GNU/Linux {dkms,initramfs}.
+ZFS_DKMS_DISABLE_STRIP='no'
+
+# Wait for this many seconds in the initrd pre_mountroot?
+# This delays startup and should be '0' on most systems.
+# Only applicable for Debian GNU/Linux {dkms,initramfs}.
+ZFS_INITRD_PRE_MOUNTROOT_SLEEP='0'
+
+# Wait for this many seconds in the initrd mountroot?
+# This delays startup and should be '0' on most systems. This might help on
+# systems which have their ZFS root on a USB disk that takes just a little
+# longer to be available
+# Only applicable for Debian GNU/Linux {dkms,initramfs}.
+ZFS_INITRD_POST_MODPROBE_SLEEP='0'
+
+# List of additional datasets to mount after the root dataset is mounted?
+#
+# The init script will use the mountpoint specified in the 'mountpoint'
+# property value in the dataset to determine where it should be mounted.
+#
+# This is a space separated list, and will be mounted in the order specified,
+# so if one filesystem depends on a previous mountpoint, make sure to put
+# them in the right order.
+#
+# It is not necessary to add filesystems below the root fs here. It is
+# taken care of by the initrd script automatically. These are only for
+# additional filesystems needed. Such as /opt, /usr/local which is not
+# located under the root fs.
+# Example: If root FS is 'rpool/ROOT/rootfs', this would make sense.
+#ZFS_INITRD_ADDITIONAL_DATASETS="rpool/ROOT/usr rpool/ROOT/var"
+
+# List of pools that should NOT be imported at boot?
+# This is a space separated list.
+#ZFS_POOL_EXCEPTIONS="test2"
+
+# Optional arguments for the ZFS Event Daemon (ZED).
+# See zed(8) for more information on available options.
+#ZED_ARGS="-M"
diff --git a/etc/init.d/zfs.lsb.in b/etc/init.d/zfs.lsb.in
deleted file mode 100644
index 05e815ede..000000000
--- a/etc/init.d/zfs.lsb.in
+++ /dev/null
@@ -1,153 +0,0 @@
-#!/bin/bash
-#
-# zfs           This script will mount/umount the zfs filesystems.
-#
-# chkconfig:    2345 01 99
-# description:  This script will mount/umount the zfs filesystems during
-#               system boot/shutdown.  Configuration of which filesystems
-#               should be mounted is handled by the zfs 'mountpoint' and
-#               'canmount' properties.  See the zfs(8) man page for details.
-#               It is also responsible for all userspace zfs services.
-#
-### BEGIN INIT INFO
-# Provides: zfs
-# Required-Start: $local_fs
-# Required-Stop: $local_fs
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Should-Stop:
-# Short-Description: Mount/umount the zfs filesystems
-# Description: ZFS is an advanced filesystem designed to simplify managing
-#              and protecting your data.  This service mounts the ZFS
-#              filesystems and starts all related zfs services.
-### END INIT INFO
-
-# Source function library.
-. /lib/lsb/init-functions
-
-LOCKFILE=/var/lock/zfs
-ZFS="@sbindir@/zfs"
-ZPOOL="@sbindir@/zpool"
-ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
-USE_DISK_BY_ID=0
-VERBOSE_MOUNT=0
-DO_OVERLAY_MOUNTS=0
-MOUNT_EXTRA_OPTIONS=""
-
-# Source zfs configuration.
-[ -r '/etc/default/zfs' ] &&  . /etc/default/zfs
-
-[ -x "$ZPOOL" ] || exit 1
-[ -x "$ZFS" ] || exit 2
-
-if [ -z "$init" ]; then
-    # Not interactive
-    grep -qE '(^|[^\\](\\\\)* )zfs=(off|no)( |$)' /proc/cmdline && exit 3
-fi
-
-start()
-{
-	[ -f "$LOCKFILE" ] && return 3
-
-	# Delay until all required block devices are present.
-	udevadm settle
-
-	# Load the zfs module stack
-	/sbin/modprobe zfs
-
-	# Ensure / exists in /etc/mtab, if not update mtab accordingly.
-	# This should be handled by rc.sysinit but lets be paranoid.
-	awk '$2 == "/" { exit 1 }' /etc/mtab
-	RETVAL=$?
-	if [ "$RETVAL" -eq 0 ]; then
-		/bin/mount -f /
-	fi
-
-	# Import all pools described by the cache file, and then mount
-	# all filesystem based on their properties.
-	if [ "$USE_DISK_BY_ID" -eq 1 ]; then
-		log_begin_msg "Importing ZFS pools"
-		"$ZPOOL" import -d /dev/disk/by-id -aN 2>/dev/null
-		ret=$?
-		log_end_msg $ret
-		[ "$ret" -eq 0 ] && POOL_IMPORTED=1
-	elif [ -f "$ZPOOL_CACHE" ] ; then
-		log_begin_msg "Importing ZFS pools"
-		"$ZPOOL" import -c "$ZPOOL_CACHE" -aN 2>/dev/null
-		ret=$?
-		log_end_msg $ret
-		[ "$ret" -eq 0 ] && POOL_IMPORTED=1
-	fi
-
-	if [ -n "$POOL_IMPORTED" ]; then
-		if [ "$VERBOSE_MOUNT" -eq 1 ]; then
-			verbose=v
-		fi
-
-		if [ "$DO_OVERLAY_MOUNTS" -eq 1 ]; then
-			overlay=O
-		fi
-
-		log_begin_msg "Mounting ZFS filesystems"
-		"$ZFS" mount -a$verbose$overlay$MOUNT_EXTRA_OPTIONS
-		log_end_msg $?
-
-		log_begin_msg "Exporting ZFS filesystems"
-		"$ZFS" share -a
-		log_end_msg $?
-	fi
-
-	touch "$LOCKFILE"
-}
-
-stop()
-{
-	[ ! -f "$LOCKFILE" ] && return 3
-
-	log_begin_msg "Unsharing ZFS filesystems"
-	"$ZFS" unshare -a
-	log_end_msg $?
-
-	log_begin_msg "Unmounting ZFS filesystems"
-	"$ZFS" umount -a
-	log_end_msg $?
-
-	rm -f "$LOCKFILE"
-}
-
-status()
-{
-	[ ! -f "$LOCKFILE" ] && return 3
-
-	"$ZPOOL" status && echo "" && "$ZPOOL" list
-}
-
-case "$1" in
-	start)
-		start
-		RETVAL=$?
-		;;
-	stop)
-		stop
-		RETVAL=$?
-		;;
-	status)
-		status
-		RETVAL=$?
-		;;
-	restart)
-		stop
-		start
-		;;
-	condrestart)
-		if [ -f "$LOCKFILE" ]; then
-			stop
-			start
-		fi
-		;;
-	*)
-		echo $"Usage: $0 {start|stop|status|restart|condrestart}"
-		;;
-esac
-
-exit $RETVAL
diff --git a/etc/init.d/zfs.lunar.in b/etc/init.d/zfs.lunar.in
deleted file mode 100644
index 7a51104c2..000000000
--- a/etc/init.d/zfs.lunar.in
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/bin/bash
-#
-# zfs           This shell script takes care of starting (mount) and
-#               stopping (umount) zfs shares.
-#
-# chkconfig: 35 60 40
-# description: ZFS is a filesystem developed by Sun, ZFS is a
-#              combined file system and logical volume manager
-#              designed by Sun Microsystems. Made available to Linux
-#              using SPL (Solaris Porting Layer) by zfsonlinux.org.
-# probe: true
-
-ZFS="@sbindir@/zfs"
-ZPOOL="@sbindir@/zpool"
-ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
-
-if [ -z "$init" ]; then
-    # Not interactive
-    grep -qE '(^|[^\\](\\\\)* )zfs=(off|no)( |$)' /proc/cmdline && exit 3
-fi
-
-case $1 in
-  start)  echo "$1ing ZFS filesystems"
-
-    # Delay until all required block devices are present.
-    udevadm settle
-
-    if ! grep "zfs" /proc/modules > /dev/null; then
-      echo "ZFS kernel module not loaded yet; loading...";
-      if ! modprobe zfs; then
-        echo "Failed to load ZFS kernel module...";
-        exit 0;
-      fi
-    fi
-
-    if ! [ `uname -m` == "x86_64" ]; then
-      echo "Warning: You're not running 64bit. Currently native zfs in";
-      echo "         linux is only supported and tested on 64bit.";
-      # should we break here? People doing this should know what they
-      # do, thus i'm not breaking here.
-    fi
-
-    # mount the filesystems
-    while IFS= read -r -d $'\n' dev; do
-      mdev=$(echo "$dev" | awk '{ print $1; }')
-      echo -n "mounting $mdev..."
-      if $ZFS mount $mdev; then
-        echo -e "done";
-      else
-        echo -e "failed";
-      fi
-    done < <($ZFS list -H);
-
-    # export the filesystems
-    echo -n "exporting ZFS filesystems..."
-    if $ZFS share -a; then
-      echo -e "done";
-    else
-      echo -e "failed";
-    fi
-
-
-  ;;
-
-  stop)  echo "$1ping ZFS filesystems"
-
-    if grep "zfs" /proc/modules > /dev/null; then
-      # module is loaded, so we can try to umount filesystems
-      while IFS= read -r -d $'\n' dev; do
-        mdev=$(echo "$dev" | awk '{ print $1 }');
-        echo -n "umounting $mdev...";
-        if $ZFS umount $mdev; then
-          echo -e "done";
-        else
-          echo -e "failed";
-        fi
-        # the next line is, because i have to reverse the
-        # output, otherwise it wouldn't work as it should
-      done < <($ZFS list -H | tac);
-
-      # and finally let's rmmod the module
-      rmmod zfs
-
-
-    else
-      # module not loaded, no need to umount anything
-      exit 0
-    fi
-
-  ;;
-
-  restart) echo "$1ing ZFS filesystems"
-    $0 stop
-    $0 start
-  ;;
-
-  *)  echo "Usage: $0 {start|stop|restart}"
-  ;;
-
-esac
diff --git a/etc/init.d/zfs.redhat.in b/etc/init.d/zfs.redhat.in
deleted file mode 100644
index 30b9f0bf6..000000000
--- a/etc/init.d/zfs.redhat.in
+++ /dev/null
@@ -1,150 +0,0 @@
-#!/bin/bash
-#
-# zfs           This script will mount/umount the zfs filesystems.
-#
-# chkconfig:    2345 01 99
-# description:  This script will mount/umount the zfs filesystems during
-#               system boot/shutdown.  Configuration of which filesystems
-#               should be mounted is handled by the zfs 'mountpoint' and
-#               'canmount' properties.  See the zfs(8) man page for details.
-#               It is also responsible for all userspace zfs services.
-#
-### BEGIN INIT INFO
-# Provides: zfs
-# Required-Start: $local_fs
-# Required-Stop: $local_fs
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Should-Stop:
-# Short-Description: Mount/umount the zfs filesystems
-# Description: ZFS is an advanced filesystem designed to simplify managing
-#              and protecting your data.  This service mounts the ZFS
-#              filesystems and starts all related zfs services.
-### END INIT INFO
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-LOCKFILE=/var/lock/zfs
-ZED="@sbindir@/zed"
-ZED_PIDFILE="@runstatedir@/zed.pid"
-ZFS="@sbindir@/zfs"
-ZPOOL="@sbindir@/zpool"
-ZPOOL_CACHE="/etc/zfs/zpool.cache"
-USE_DISK_BY_ID=0
-VERBOSE_MOUNT=0
-DO_OVERLAY_MOUNTS=0
-MOUNT_EXTRA_OPTIONS=""
-
-# Source zfs configuration.
-[ -r '/etc/sysconfig/zfs' ] &&  . /etc/sysconfig/zfs
-
-[ -x "$ZPOOL" ] || exit 1
-[ -x "$ZFS" ] || exit 2
-
-if [ -z "$init" ]; then
-    # Not interactive
-    grep -qE '(^|[^\\](\\\\)* )zfs=(off|no)( |$)' /proc/cmdline && exit 3
-fi
-
-start()
-{
-	[ -f "$LOCKFILE" ] && return 3
-
-	# Delay until all required block devices are present.
-	udevadm settle
-
-	# Load the zfs module stack
-	/sbin/modprobe zfs
-
-	# Start the ZED for event handling
-	action $"Starting ZFS Event Daemon" daemon --pidfile="$ZED_PIDFILE" "$ZED"
-
-	# Ensure / exists in /etc/mtab, if not update mtab accordingly.
-	# This should be handled by rc.sysinit but lets be paranoid.
-	awk '$2 == "/" { exit 1 }' /etc/mtab
-	RETVAL=$?
-	if [ "$RETVAL" -eq 0 ]; then
-		/bin/mount -f /
-	fi
-
-	# Import all pools described by the cache file, and then mount
-	# all filesystem based on their properties.
-	if [ "$USE_DISK_BY_ID" -eq 1 ]; then
-		action $"Importing ZFS pools" \
-			"$ZPOOL" import -d /dev/disk/by-id -aN 2>/dev/null
-		ret=$?
-		[ "$ret" -eq 0 ] && POOL_IMPORTED=1
-	elif [ -f "$ZPOOL_CACHE" ] ; then
-		action $"Importing ZFS pools" \
-			"$ZPOOL" import -c "$ZPOOL_CACHE" -aN 2>/dev/null
-		ret=$?
-		[ "$ret" -eq 0 ] && POOL_IMPORTED=1
-	fi
-
-	if [ -n "$POOL_IMPORTED" ]; then
-		if [ "$VERBOSE_MOUNT" -eq 1 ]; then
-			verbose=v
-		fi
-
-		if [ "$DO_OVERLAY_MOUNTS" -eq 1 ]; then
-			overlay=O
-		fi
-
-		action $"Mounting ZFS filesystems" \
-			"$ZFS" mount -a$verbose$overlay$MOUNT_EXTRA_OPTIONS
-
-		action $"Sharing ZFS filesystems" \
-			"$ZFS" share -a
-	fi
-
-	touch "$LOCKFILE"
-}
-
-stop()
-{
-	[ ! -f "$LOCKFILE" ] && return 3
-
-	action $"Unsharing ZFS filesystems" "$ZFS" unshare -a
-	action $"Unmounting ZFS filesystems" "$ZFS" umount -a
-	action $"Shutting down ZFS Event Daemon" killproc -p "$ZED_PIDFILE" "$ZED"
-
-	rm -f "$LOCKFILE"
-}
-
-status()
-{
-	[ ! -f "$LOCKFILE" ] && return 3
-
-	"$ZPOOL" status && echo "" && "$ZPOOL" list
-}
-
-case "$1" in
-	start)
-		start
-		RETVAL=$?
-		;;
-	stop)
-		stop
-		RETVAL=$?
-		;;
-	status)
-		status
-		RETVAL=$?
-		;;
-	restart)
-		stop
-		start
-		;;
-	condrestart)
-		if [ -f "$LOCKFILE" ]; then
-			stop
-			start
-		fi
-		;;
-	*)
-		echo $"Usage: $0 {start|stop|status|restart|condrestart}"
-		;;
-esac
-
-exit $RETVAL