Add support for "--enable-code-coverage" option

This change adds support for a new option that can be passed to the
configure script: "--enable-code-coverage". Further, the "--enable-gcov"
option has been removed, as this new option provides the same
functionality (plus more).

When using this new option the following make targets are available:

 * check-code-coverage
 * code-coverage-capture
 * code-coverage-clean

Note: these make targets can only be run from the root of the project.

Reviewed-by: Brian Behlendorf <[email protected]>
Signed-off-by: Prakash Surya <[email protected]>
Closes #6670 

3 files changed, 266 insertions, 31 deletions

diff --git a/config/Rules.am b/config/Rules.am
index 1d39e7779..215f09c34 100644
--- a/config/Rules.am
+++ b/config/Rules.am
@@ -6,6 +6,7 @@ AM_CFLAGS += ${NO_UNUSED_BUT_SET_VARIABLE}
 AM_CFLAGS += ${NO_BOOL_COMPARE}
 AM_CFLAGS += -fno-strict-aliasing
 AM_CFLAGS += -std=gnu99
+AM_CFLAGS += $(CODE_COVERAGE_CFLAGS)
 AM_CPPFLAGS  = -D_GNU_SOURCE -D__EXTENSIONS__ -D_REENTRANT
 AM_CPPFLAGS += -D_POSIX_PTHREAD_SEMANTICS -D_FILE_OFFSET_BITS=64
 AM_CPPFLAGS += -D_LARGEFILE64_SOURCE -DHAVE_LARGE_STACKS=1
@@ -14,3 +15,4 @@ AM_CPPFLAGS += -DLIBEXECDIR=\"$(libexecdir)\"
 AM_CPPFLAGS += -DRUNSTATEDIR=\"$(runstatedir)\"
 AM_CPPFLAGS += -DSBINDIR=\"$(sbindir)\"
 AM_CPPFLAGS += -DSYSCONFDIR=\"$(sysconfdir)\"
+AM_CPPFLAGS += $(CODE_COVERAGE_CPPFLAGS)
diff --git a/config/ax_code_coverage.m4 b/config/ax_code_coverage.m4
new file mode 100644
index 000000000..6484f0332
--- /dev/null
+++ b/config/ax_code_coverage.m4
@@ -0,0 +1,264 @@
+# ===========================================================================
+#     https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_CODE_COVERAGE()
+#
+# DESCRIPTION
+#
+#   Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS,
+#   CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included
+#   in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every
+#   build target (program or library) which should be built with code
+#   coverage support. Also defines CODE_COVERAGE_RULES which should be
+#   substituted in your Makefile; and $enable_code_coverage which can be
+#   used in subsequent configure output. CODE_COVERAGE_ENABLED is defined
+#   and substituted, and corresponds to the value of the
+#   --enable-code-coverage option, which defaults to being disabled.
+#
+#   Test also for gcov program and create GCOV variable that could be
+#   substituted.
+#
+#   Note that all optimization flags in CFLAGS must be disabled when code
+#   coverage is enabled.
+#
+#   Usage example:
+#
+#   configure.ac:
+#
+#     AX_CODE_COVERAGE
+#
+#   Makefile.am:
+#
+#     @CODE_COVERAGE_RULES@
+#     my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ...
+#     my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ...
+#     my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ...
+#     my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ...
+#
+#   This results in a "check-code-coverage" rule being added to any
+#   Makefile.am which includes "@CODE_COVERAGE_RULES@" (assuming the module
+#   has been configured with --enable-code-coverage). Running `make
+#   check-code-coverage` in that directory will run the module's test suite
+#   (`make check`) and build a code coverage report detailing the code which
+#   was touched, then print the URI for the report.
+#
+#   In earlier versions of this macro, CODE_COVERAGE_LDFLAGS was defined
+#   instead of CODE_COVERAGE_LIBS. They are both still defined, but use of
+#   CODE_COVERAGE_LIBS is preferred for clarity; CODE_COVERAGE_LDFLAGS is
+#   deprecated. They have the same value.
+#
+#   This code was derived from Makefile.decl in GLib, originally licenced
+#   under LGPLv2.1+.
+#
+# LICENSE
+#
+#   Copyright (c) 2012, 2016 Philip Withnall
+#   Copyright (c) 2012 Xan Lopez
+#   Copyright (c) 2012 Christian Persch
+#   Copyright (c) 2012 Paolo Borelli
+#   Copyright (c) 2012 Dan Winship
+#   Copyright (c) 2015 Bastien ROUCARIES
+#
+#   This library is free software; you can redistribute it and/or modify it
+#   under the terms of the GNU Lesser General Public License as published by
+#   the Free Software Foundation; either version 2.1 of the License, or (at
+#   your option) any later version.
+#
+#   This library is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
+#   General Public License for more details.
+#
+#   You should have received a copy of the GNU Lesser General Public License
+#   along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+#serial 25
+
+AC_DEFUN([AX_CODE_COVERAGE],[
+	dnl Check for --enable-code-coverage
+	AC_REQUIRE([AC_PROG_SED])
+
+	# allow to override gcov location
+	AC_ARG_WITH([gcov],
+	  [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])],
+	  [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov],
+	  [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov])
+
+	AC_MSG_CHECKING([whether to build with code coverage support])
+	AC_ARG_ENABLE([code-coverage],
+	  AS_HELP_STRING([--enable-code-coverage],
+	  [Whether to enable code coverage support]),,
+	  enable_code_coverage=no)
+
+	AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes])
+	AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
+	AC_MSG_RESULT($enable_code_coverage)
+
+	AS_IF([ test "$enable_code_coverage" = "yes" ], [
+		# check for gcov
+		AC_CHECK_TOOL([GCOV],
+		  [$_AX_CODE_COVERAGE_GCOV_PROG_WITH],
+		  [:])
+		AS_IF([test "X$GCOV" = "X:"],
+		  [AC_MSG_ERROR([gcov is needed to do coverage])])
+		AC_SUBST([GCOV])
+
+		dnl Check if gcc is being used
+		AS_IF([ test "$GCC" = "no" ], [
+			AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
+		])
+
+		AC_CHECK_PROG([LCOV], [lcov], [lcov])
+		AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
+
+		AS_IF([ test -z "$LCOV" ], [
+			AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed])
+		])
+
+		AS_IF([ test -z "$GENHTML" ], [
+			AC_MSG_ERROR([Could not find genhtml from the lcov package])
+		])
+
+		dnl Build the code coverage flags
+		dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility
+		CODE_COVERAGE_CPPFLAGS="-DNDEBUG"
+		CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
+		CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
+		CODE_COVERAGE_LIBS="-lgcov"
+		CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS"
+
+		AC_SUBST([CODE_COVERAGE_CPPFLAGS])
+		AC_SUBST([CODE_COVERAGE_CFLAGS])
+		AC_SUBST([CODE_COVERAGE_CXXFLAGS])
+		AC_SUBST([CODE_COVERAGE_LIBS])
+		AC_SUBST([CODE_COVERAGE_LDFLAGS])
+
+		[CODE_COVERAGE_RULES_CHECK='
+	-$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check
+	$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture
+']
+		[CODE_COVERAGE_RULES_CAPTURE='
+	$(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS)
+	$(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS)
+	-@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp
+	$(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
+	@echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"
+']
+		[CODE_COVERAGE_RULES_CLEAN='
+clean: code-coverage-clean
+distclean: code-coverage-clean
+code-coverage-clean:
+	-$(LCOV) --directory $(top_builddir) -z
+	-rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY)
+	-find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete
+']
+	], [
+		[CODE_COVERAGE_RULES_CHECK='
+	@echo "Need to reconfigure with --enable-code-coverage"
+']
+		CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK"
+		CODE_COVERAGE_RULES_CLEAN=''
+	])
+
+[CODE_COVERAGE_RULES='
+# Code coverage
+#
+# Optional:
+#  - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
+#    Multiple directories may be specified, separated by whitespace.
+#    (Default: $(top_builddir))
+#  - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
+#    by lcov for code coverage. (Default:
+#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
+#  - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
+#    reports to be created. (Default:
+#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
+#  - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
+#    set to 0 to disable it and leave empty to stay with the default.
+#    (Default: empty)
+#  - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
+#    instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
+#  - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
+#    instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
+#  - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
+#  - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
+#    collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
+#  - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
+#    instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
+#  - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
+#    lcov instance. (Default: empty)
+#  - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
+#    instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
+#  - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
+#    genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
+#  - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
+#    instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
+#  - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
+#
+# The generated report will be titled using the $(PACKAGE_NAME) and
+# $(PACKAGE_VERSION). In order to add the current git hash to the title,
+# use the git-version-gen script, available online.
+
+# Optional variables
+CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
+CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
+CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
+CODE_COVERAGE_BRANCH_COVERAGE ?=
+CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
+--rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
+CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
+CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)"
+CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
+CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
+CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
+CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
+CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\
+$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
+--rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
+CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
+CODE_COVERAGE_IGNORE_PATTERN ?=
+
+GITIGNOREFILES ?=
+GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
+
+code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V))
+code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY))
+code_coverage_v_lcov_cap_0 = @echo "  LCOV   --capture"\
+ $(CODE_COVERAGE_OUTPUT_FILE);
+code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V))
+code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY))
+code_coverage_v_lcov_ign_0 = @echo "  LCOV   --remove /tmp/*"\
+ $(CODE_COVERAGE_IGNORE_PATTERN);
+code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V))
+code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY))
+code_coverage_v_genhtml_0 = @echo "  GEN   " $(CODE_COVERAGE_OUTPUT_DIRECTORY);
+code_coverage_quiet = $(code_coverage_quiet_$(V))
+code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
+code_coverage_quiet_0 = --quiet
+
+# sanitizes the test-name: replaces with underscores: dashes and dots
+code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1)))
+
+# Use recursive makes in order to ignore errors during check
+check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"'
+
+# Capture code coverage data
+code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"'
+
+# Hook rule executed before code-coverage-capture, overridable by the user
+code-coverage-capture-hook:
+
+'"$CODE_COVERAGE_RULES_CLEAN"'
+
+A''M_DISTCHECK_CONFIGURE_FLAGS ?=
+A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
+
+.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
+']
+
+	AC_SUBST([CODE_COVERAGE_RULES])
+	m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])])
+])
diff --git a/config/zfs-build.m4 b/config/zfs-build.m4
index c695a882e..17cc80462 100644
--- a/config/zfs-build.m4
+++ b/config/zfs-build.m4
@@ -76,37 +76,6 @@ AC_DEFUN([ZFS_AC_DEBUGINFO], [
 	AC_MSG_RESULT([$enable_debuginfo])
 ])
 
-AC_DEFUN([ZFS_AC_GCOV_KERNEL], [
-])
-
-AC_DEFUN([ZFS_AC_GCOV_USER], [
-	DEBUG_CFLAGS="$DEBUG_CFLAGS -fprofile-arcs -ftest-coverage"
-])
-
-AC_DEFUN([ZFS_AC_GCOV], [
-	AC_MSG_CHECKING([whether gcov profiling will be enabled])
-	AC_ARG_ENABLE([gcov],
-		[AS_HELP_STRING([--enable-gcov],
-		[Enable gcov profiling @<:@default=no@:>@])],
-		[],
-		[enable_gcov=no])
-
-	AS_CASE(["x$enable_gcov"],
-		["xyes"],
-		[ZFS_AC_GCOV_KERNEL
-		ZFS_AC_GCOV_USER],
-		["xkernel"],
-		[ZFS_AC_GCOV_KERNEL],
-		["xuser"],
-		[ZFS_AC_GCOV_USER],
-		["xno"],
-		[],
-		[AC_MSG_ERROR([Unknown option $enable_gcov])])
-
-	AC_SUBST(DEBUG_CFLAGS)
-	AC_MSG_RESULT([$enable_gcov])
-])
-
 AC_DEFUN([ZFS_AC_CONFIG_ALWAYS], [
 	ZFS_AC_CONFIG_ALWAYS_NO_UNUSED_BUT_SET_VARIABLE
 	ZFS_AC_CONFIG_ALWAYS_NO_BOOL_COMPARE