aboutsummaryrefslogtreecommitdiffstats
path: root/src/mesa/drivers/dri/r300
diff options
context:
space:
mode:
Diffstat (limited to 'src/mesa/drivers/dri/r300')
-rw-r--r--src/mesa/drivers/dri/r300/r300_cmdbuf.c16
-rw-r--r--src/mesa/drivers/dri/r300/r300_fragprog.c207
-rw-r--r--src/mesa/drivers/dri/r300/r300_fragprog.h64
-rw-r--r--src/mesa/drivers/dri/r300/r300_ioctl.c14
-rw-r--r--src/mesa/drivers/dri/r300/r300_reg.h455
-rw-r--r--src/mesa/drivers/dri/r300/r300_state.c28
6 files changed, 409 insertions, 375 deletions
diff --git a/src/mesa/drivers/dri/r300/r300_cmdbuf.c b/src/mesa/drivers/dri/r300/r300_cmdbuf.c
index 08a616c3355..82c7eb09351 100644
--- a/src/mesa/drivers/dri/r300/r300_cmdbuf.c
+++ b/src/mesa/drivers/dri/r300/r300_cmdbuf.c
@@ -409,7 +409,7 @@ void r300InitCmdBuf(r300ContextPtr r300)
ALLOC_STATE(sc_screendoor, always, 2, 0);
r300->hw.sc_screendoor.cmd[0] = cmdpacket0(R300_SC_SCREENDOOR, 1);
ALLOC_STATE(us_out_fmt, always, 6, 0);
- r300->hw.us_out_fmt.cmd[0] = cmdpacket0(R500_US_OUT_FMT, 5);
+ r300->hw.us_out_fmt.cmd[0] = cmdpacket0(R300_US_OUT_FMT, 5);
if (is_r500) {
ALLOC_STATE(fp, always, R500_FP_CMDSIZE, 0);
@@ -422,19 +422,19 @@ void r300InitCmdBuf(r300ContextPtr r300)
r300->hw.r500fp_const.cmd[R300_FPI_CMD_0] = cmdr500fp(0, 0, 1, 0);
} else {
ALLOC_STATE(fp, always, R300_FP_CMDSIZE, 0);
- r300->hw.fp.cmd[R300_FP_CMD_0] = cmdpacket0(R300_PFS_CNTL_0, 3);
- r300->hw.fp.cmd[R300_FP_CMD_1] = cmdpacket0(R300_PFS_NODE_0, 4);
+ r300->hw.fp.cmd[R300_FP_CMD_0] = cmdpacket0(R300_US_CONFIG, 3);
+ r300->hw.fp.cmd[R300_FP_CMD_1] = cmdpacket0(R300_US_CODE_ADDR_0, 4);
ALLOC_STATE(fpt, variable, R300_FPT_CMDSIZE, 0);
- r300->hw.fpt.cmd[R300_FPT_CMD_0] = cmdpacket0(R300_PFS_TEXI_0, 0);
+ r300->hw.fpt.cmd[R300_FPT_CMD_0] = cmdpacket0(R300_US_TEX_INST_0, 0);
ALLOC_STATE(fpi[0], variable, R300_FPI_CMDSIZE, 0);
- r300->hw.fpi[0].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR0_0, 1);
+ r300->hw.fpi[0].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_RGB_INST_0, 1);
ALLOC_STATE(fpi[1], variable, R300_FPI_CMDSIZE, 1);
- r300->hw.fpi[1].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR1_0, 1);
+ r300->hw.fpi[1].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_RGB_ADDR_0, 1);
ALLOC_STATE(fpi[2], variable, R300_FPI_CMDSIZE, 2);
- r300->hw.fpi[2].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR2_0, 1);
+ r300->hw.fpi[2].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_ALPHA_INST_0, 1);
ALLOC_STATE(fpi[3], variable, R300_FPI_CMDSIZE, 3);
- r300->hw.fpi[3].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR3_0, 1);
+ r300->hw.fpi[3].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_ALPHA_ADDR_0, 1);
ALLOC_STATE(fpp, variable, R300_FPP_CMDSIZE, 0);
r300->hw.fpp.cmd[R300_FPP_CMD_0] = cmdpacket0(R300_PFS_PARAM_0_X, 0);
}
diff --git a/src/mesa/drivers/dri/r300/r300_fragprog.c b/src/mesa/drivers/dri/r300/r300_fragprog.c
index 5ba2971fb97..a28841dda8f 100644
--- a/src/mesa/drivers/dri/r300/r300_fragprog.c
+++ b/src/mesa/drivers/dri/r300/r300_fragprog.c
@@ -172,19 +172,19 @@ static const struct {
int s_op;
} r300_fpop[] = {
/* *INDENT-OFF* */
- {"MAD", 3, R300_FPI0_OUTC_MAD, R300_FPI2_OUTA_MAD},
- {"DP3", 2, R300_FPI0_OUTC_DP3, R300_FPI2_OUTA_DP4},
- {"DP4", 2, R300_FPI0_OUTC_DP4, R300_FPI2_OUTA_DP4},
- {"MIN", 2, R300_FPI0_OUTC_MIN, R300_FPI2_OUTA_MIN},
- {"MAX", 2, R300_FPI0_OUTC_MAX, R300_FPI2_OUTA_MAX},
- {"CMP", 3, R300_FPI0_OUTC_CMP, R300_FPI2_OUTA_CMP},
- {"FRC", 1, R300_FPI0_OUTC_FRC, R300_FPI2_OUTA_FRC},
- {"EX2", 1, R300_FPI0_OUTC_REPL_ALPHA, R300_FPI2_OUTA_EX2},
- {"LG2", 1, R300_FPI0_OUTC_REPL_ALPHA, R300_FPI2_OUTA_LG2},
- {"RCP", 1, R300_FPI0_OUTC_REPL_ALPHA, R300_FPI2_OUTA_RCP},
- {"RSQ", 1, R300_FPI0_OUTC_REPL_ALPHA, R300_FPI2_OUTA_RSQ},
- {"REPL_ALPHA", 1, R300_FPI0_OUTC_REPL_ALPHA, PFS_INVAL},
- {"CMPH", 3, R300_FPI0_OUTC_CMPH, PFS_INVAL},
+ {"MAD", 3, R300_ALU_OUTC_MAD, R300_ALU_OUTA_MAD},
+ {"DP3", 2, R300_ALU_OUTC_DP3, R300_ALU_OUTA_DP4},
+ {"DP4", 2, R300_ALU_OUTC_DP4, R300_ALU_OUTA_DP4},
+ {"MIN", 2, R300_ALU_OUTC_MIN, R300_ALU_OUTA_MIN},
+ {"MAX", 2, R300_ALU_OUTC_MAX, R300_ALU_OUTA_MAX},
+ {"CMP", 3, R300_ALU_OUTC_CMP, R300_ALU_OUTA_CMP},
+ {"FRC", 1, R300_ALU_OUTC_FRC, R300_ALU_OUTA_FRC},
+ {"EX2", 1, R300_ALU_OUTC_REPL_ALPHA, R300_ALU_OUTA_EX2},
+ {"LG2", 1, R300_ALU_OUTC_REPL_ALPHA, R300_ALU_OUTA_LG2},
+ {"RCP", 1, R300_ALU_OUTC_REPL_ALPHA, R300_ALU_OUTA_RCP},
+ {"RSQ", 1, R300_ALU_OUTC_REPL_ALPHA, R300_ALU_OUTA_RSQ},
+ {"REPL_ALPHA", 1, R300_ALU_OUTC_REPL_ALPHA, PFS_INVAL},
+ {"CMPH", 3, R300_ALU_OUTC_CMPH, PFS_INVAL},
/* *INDENT-ON* */
};
@@ -209,17 +209,17 @@ static const struct r300_pfs_swizzle {
GLuint flags;
} v_swiz[] = {
/* *INDENT-OFF* */
- {MAKE_SWZ3(X, Y, Z), R300_FPI0_ARGC_SRC0C_XYZ, 4, SLOT_SRC_VECTOR},
- {MAKE_SWZ3(X, X, X), R300_FPI0_ARGC_SRC0C_XXX, 4, SLOT_SRC_VECTOR},
- {MAKE_SWZ3(Y, Y, Y), R300_FPI0_ARGC_SRC0C_YYY, 4, SLOT_SRC_VECTOR},
- {MAKE_SWZ3(Z, Z, Z), R300_FPI0_ARGC_SRC0C_ZZZ, 4, SLOT_SRC_VECTOR},
- {MAKE_SWZ3(W, W, W), R300_FPI0_ARGC_SRC0A, 1, SLOT_SRC_SCALAR},
- {MAKE_SWZ3(Y, Z, X), R300_FPI0_ARGC_SRC0C_YZX, 1, SLOT_SRC_VECTOR},
- {MAKE_SWZ3(Z, X, Y), R300_FPI0_ARGC_SRC0C_ZXY, 1, SLOT_SRC_VECTOR},
- {MAKE_SWZ3(W, Z, Y), R300_FPI0_ARGC_SRC0CA_WZY, 1, SLOT_SRC_BOTH},
- {MAKE_SWZ3(ONE, ONE, ONE), R300_FPI0_ARGC_ONE, 0, 0},
- {MAKE_SWZ3(ZERO, ZERO, ZERO), R300_FPI0_ARGC_ZERO, 0, 0},
- {MAKE_SWZ3(HALF, HALF, HALF), R300_FPI0_ARGC_HALF, 0, 0},
+ {MAKE_SWZ3(X, Y, Z), R300_ALU_ARGC_SRC0C_XYZ, 4, SLOT_SRC_VECTOR},
+ {MAKE_SWZ3(X, X, X), R300_ALU_ARGC_SRC0C_XXX, 4, SLOT_SRC_VECTOR},
+ {MAKE_SWZ3(Y, Y, Y), R300_ALU_ARGC_SRC0C_YYY, 4, SLOT_SRC_VECTOR},
+ {MAKE_SWZ3(Z, Z, Z), R300_ALU_ARGC_SRC0C_ZZZ, 4, SLOT_SRC_VECTOR},
+ {MAKE_SWZ3(W, W, W), R300_ALU_ARGC_SRC0A, 1, SLOT_SRC_SCALAR},
+ {MAKE_SWZ3(Y, Z, X), R300_ALU_ARGC_SRC0C_YZX, 1, SLOT_SRC_VECTOR},
+ {MAKE_SWZ3(Z, X, Y), R300_ALU_ARGC_SRC0C_ZXY, 1, SLOT_SRC_VECTOR},
+ {MAKE_SWZ3(W, Z, Y), R300_ALU_ARGC_SRC0CA_WZY, 1, SLOT_SRC_BOTH},
+ {MAKE_SWZ3(ONE, ONE, ONE), R300_ALU_ARGC_ONE, 0, 0},
+ {MAKE_SWZ3(ZERO, ZERO, ZERO), R300_ALU_ARGC_ZERO, 0, 0},
+ {MAKE_SWZ3(HALF, HALF, HALF), R300_ALU_ARGC_HALF, 0, 0},
{PFS_INVAL, 0, 0, 0},
/* *INDENT-ON* */
};
@@ -252,13 +252,13 @@ static const struct {
GLuint flags;
} s_swiz[] = {
/* *INDENT-OFF* */
- {R300_FPI2_ARGA_SRC0C_X, 3, SLOT_SRC_VECTOR},
- {R300_FPI2_ARGA_SRC0C_Y, 3, SLOT_SRC_VECTOR},
- {R300_FPI2_ARGA_SRC0C_Z, 3, SLOT_SRC_VECTOR},
- {R300_FPI2_ARGA_SRC0A, 1, SLOT_SRC_SCALAR},
- {R300_FPI2_ARGA_ZERO, 0, 0},
- {R300_FPI2_ARGA_ONE, 0, 0},
- {R300_FPI2_ARGA_HALF, 0, 0}
+ {R300_ALU_ARGA_SRC0C_X, 3, SLOT_SRC_VECTOR},
+ {R300_ALU_ARGA_SRC0C_Y, 3, SLOT_SRC_VECTOR},
+ {R300_ALU_ARGA_SRC0C_Z, 3, SLOT_SRC_VECTOR},
+ {R300_ALU_ARGA_SRC0A, 1, SLOT_SRC_SCALAR},
+ {R300_ALU_ARGA_ZERO, 0, 0},
+ {R300_ALU_ARGA_ONE, 0, 0},
+ {R300_ALU_ARGA_HALF, 0, 0}
/* *INDENT-ON* */
};
@@ -859,11 +859,11 @@ static int t_hw_dst(struct r300_fragment_program *fp,
switch (index) {
case FRAG_RESULT_COLR:
fp->node[fp->cur_node].flags |=
- R300_PFS_NODE_OUTPUT_COLOR;
+ R300_RGBA_OUT;
break;
case FRAG_RESULT_DEPR:
fp->node[fp->cur_node].flags |=
- R300_PFS_NODE_OUTPUT_DEPTH;
+ R300_W_OUT;
break;
}
return index;
@@ -907,7 +907,7 @@ static void emit_tex(struct r300_fragment_program *fp,
din = cs->dest_in_node;
/* Resolve source/dest to hardware registers */
- if (opcode != R300_FPITX_OP_KIL) {
+ if (opcode != R300_TEX_OP_KIL) {
if (fpi->TexSrcTarget == TEXTURE_RECT_INDEX) {
/**
* Hardware uses [0..1]x[0..1] range for rectangle textures
@@ -1007,11 +1007,10 @@ static void emit_tex(struct r300_fragment_program *fp,
if (fp->cur_node == 0)
fp->first_node_has_tex = 1;
- fp->tex.inst[fp->tex.length++] = 0 | (hwsrc << R300_FPITX_SRC_SHIFT)
- | (hwdest << R300_FPITX_DST_SHIFT)
- | (unit << R300_FPITX_IMAGE_SHIFT)
- /* not entirely sure about this */
- | (opcode << R300_FPITX_OPCODE_SHIFT);
+ fp->tex.inst[fp->tex.length++] = 0 | (hwsrc << R300_SRC_ADDR_SHIFT)
+ | (hwdest << R300_DST_ADDR_SHIFT)
+ | (unit << R300_TEX_ID_SHIFT)
+ | (opcode << R300_TEX_INST_SHIFT);
cs->dest_in_node |= (1 << hwdest);
if (REG_GET_TYPE(coord) != REG_TYPE_CONST)
@@ -1228,17 +1227,17 @@ static int find_and_prepare_slot(struct r300_fragment_program *fp,
}
// Emit the source fetch code
- fp->alu.inst[pos].inst1 &= ~R300_FPI1_SRC_MASK;
+ fp->alu.inst[pos].inst1 &= ~R300_ALU_SRC_MASK;
fp->alu.inst[pos].inst1 |=
- ((cs->slot[pos].vsrc[0] << R300_FPI1_SRC0C_SHIFT) |
- (cs->slot[pos].vsrc[1] << R300_FPI1_SRC1C_SHIFT) |
- (cs->slot[pos].vsrc[2] << R300_FPI1_SRC2C_SHIFT));
+ ((cs->slot[pos].vsrc[0] << R300_ALU_SRC0C_SHIFT) |
+ (cs->slot[pos].vsrc[1] << R300_ALU_SRC1C_SHIFT) |
+ (cs->slot[pos].vsrc[2] << R300_ALU_SRC2C_SHIFT));
- fp->alu.inst[pos].inst3 &= ~R300_FPI3_SRC_MASK;
+ fp->alu.inst[pos].inst3 &= ~R300_ALU_SRC_MASK;
fp->alu.inst[pos].inst3 |=
- ((cs->slot[pos].ssrc[0] << R300_FPI3_SRC0A_SHIFT) |
- (cs->slot[pos].ssrc[1] << R300_FPI3_SRC1A_SHIFT) |
- (cs->slot[pos].ssrc[2] << R300_FPI3_SRC2A_SHIFT));
+ ((cs->slot[pos].ssrc[0] << R300_ALU_SRC0A_SHIFT) |
+ (cs->slot[pos].ssrc[1] << R300_ALU_SRC1A_SHIFT) |
+ (cs->slot[pos].ssrc[2] << R300_ALU_SRC2A_SHIFT));
// Emit the argument selection code
if (emit_vop) {
@@ -1257,17 +1256,17 @@ static int find_and_prepare_slot(struct r300_fragment_program *fp,
ARG_ABS
: 0);
} else {
- swz[i] = R300_FPI0_ARGC_ZERO;
+ swz[i] = R300_ALU_ARGC_ZERO;
}
}
fp->alu.inst[pos].inst0 &=
- ~(R300_FPI0_ARG0C_MASK | R300_FPI0_ARG1C_MASK |
- R300_FPI0_ARG2C_MASK);
+ ~(R300_ALU_ARG0C_MASK | R300_ALU_ARG1C_MASK |
+ R300_ALU_ARG2C_MASK);
fp->alu.inst[pos].inst0 |=
- (swz[0] << R300_FPI0_ARG0C_SHIFT) | (swz[1] <<
- R300_FPI0_ARG1C_SHIFT)
- | (swz[2] << R300_FPI0_ARG2C_SHIFT);
+ (swz[0] << R300_ALU_ARG0C_SHIFT) | (swz[1] <<
+ R300_ALU_ARG1C_SHIFT)
+ | (swz[2] << R300_ALU_ARG2C_SHIFT);
}
if (emit_sop) {
@@ -1286,17 +1285,17 @@ static int find_and_prepare_slot(struct r300_fragment_program *fp,
ARG_ABS
: 0);
} else {
- swz[i] = R300_FPI2_ARGA_ZERO;
+ swz[i] = R300_ALU_ARGA_ZERO;
}
}
fp->alu.inst[pos].inst2 &=
- ~(R300_FPI2_ARG0A_MASK | R300_FPI2_ARG1A_MASK |
- R300_FPI2_ARG2A_MASK);
+ ~(R300_ALU_ARG0A_MASK | R300_ALU_ARG1A_MASK |
+ R300_ALU_ARG2A_MASK);
fp->alu.inst[pos].inst2 |=
- (swz[0] << R300_FPI2_ARG0A_SHIFT) | (swz[1] <<
- R300_FPI2_ARG1A_SHIFT)
- | (swz[2] << R300_FPI2_ARG2A_SHIFT);
+ (swz[0] << R300_ALU_ARG0A_SHIFT) | (swz[1] <<
+ R300_ALU_ARG1A_SHIFT)
+ | (swz[2] << R300_ALU_ARG2A_SHIFT);
}
return pos;
@@ -1333,9 +1332,9 @@ static void emit_arith(struct r300_fragment_program *fp,
emit_vop = GL_FALSE;
emit_sop = GL_FALSE;
- if ((mask & WRITEMASK_XYZ) || vop == R300_FPI0_OUTC_DP3)
+ if ((mask & WRITEMASK_XYZ) || vop == R300_ALU_OUTC_DP3)
emit_vop = GL_TRUE;
- if ((mask & WRITEMASK_W) || vop == R300_FPI0_OUTC_REPL_ALPHA)
+ if ((mask & WRITEMASK_W) || vop == R300_ALU_OUTC_REPL_ALPHA)
emit_sop = GL_TRUE;
pos =
@@ -1347,33 +1346,33 @@ static void emit_arith(struct r300_fragment_program *fp,
hwdest = t_hw_dst(fp, dest, GL_FALSE, pos); /* Note: Side effects wrt register allocation */
if (flags & PFS_FLAG_SAT) {
- vop |= R300_FPI0_OUTC_SAT;
- sop |= R300_FPI2_OUTA_SAT;
+ vop |= R300_ALU_OUTC_CLAMP;
+ sop |= R300_ALU_OUTA_CLAMP;
}
- /* Throw the pieces together and get FPI0/1 */
+ /* Throw the pieces together and get ALU/1 */
if (emit_vop) {
fp->alu.inst[pos].inst0 |= vop;
- fp->alu.inst[pos].inst1 |= hwdest << R300_FPI1_DSTC_SHIFT;
+ fp->alu.inst[pos].inst1 |= hwdest << R300_ALU_DSTC_SHIFT;
if (REG_GET_TYPE(dest) == REG_TYPE_OUTPUT) {
if (REG_GET_INDEX(dest) == FRAG_RESULT_COLR) {
fp->alu.inst[pos].inst1 |=
(mask & WRITEMASK_XYZ) <<
- R300_FPI1_DSTC_OUTPUT_MASK_SHIFT;
+ R300_ALU_DSTC_OUTPUT_MASK_SHIFT;
} else
assert(0);
} else {
fp->alu.inst[pos].inst1 |=
(mask & WRITEMASK_XYZ) <<
- R300_FPI1_DSTC_REG_MASK_SHIFT;
+ R300_ALU_DSTC_REG_MASK_SHIFT;
cs->hwtemps[hwdest].vector_valid = pos + 1;
}
}
- /* And now FPI2/3 */
+ /* And now ALU/3 */
if (emit_sop) {
fp->alu.inst[pos].inst2 |= sop;
@@ -1381,18 +1380,18 @@ static void emit_arith(struct r300_fragment_program *fp,
if (REG_GET_TYPE(dest) == REG_TYPE_OUTPUT) {
if (REG_GET_INDEX(dest) == FRAG_RESULT_COLR) {
fp->alu.inst[pos].inst3 |=
- (hwdest << R300_FPI3_DSTA_SHIFT) |
- R300_FPI3_DSTA_OUTPUT;
+ (hwdest << R300_ALU_DSTA_SHIFT) |
+ R300_ALU_DSTA_OUTPUT;
} else if (REG_GET_INDEX(dest) ==
FRAG_RESULT_DEPR) {
fp->alu.inst[pos].inst3 |=
- R300_FPI3_DSTA_DEPTH;
+ R300_ALU_DSTA_DEPTH;
} else
assert(0);
} else {
fp->alu.inst[pos].inst3 |=
- (hwdest << R300_FPI3_DSTA_SHIFT) |
- R300_FPI3_DSTA_REG;
+ (hwdest << R300_ALU_DSTA_SHIFT) |
+ R300_ALU_DSTA_REG;
cs->hwtemps[hwdest].scalar_valid = pos + 1;
}
@@ -1708,7 +1707,7 @@ static GLboolean parse_program(struct r300_fragment_program *fp)
src[0], undef, undef, flags);
break;
case OPCODE_KIL:
- emit_tex(fp, fpi, R300_FPITX_OP_KIL);
+ emit_tex(fp, fpi, R300_TEX_OP_KIL);
break;
case OPCODE_LG2:
src[0] = t_scalar_src(fp, fpi->SrcReg[0]);
@@ -1943,13 +1942,13 @@ static GLboolean parse_program(struct r300_fragment_program *fp)
src[0], pfs_one, negate(src[1]), flags);
break;
case OPCODE_TEX:
- emit_tex(fp, fpi, R300_FPITX_OP_TEX);
+ emit_tex(fp, fpi, R300_TEX_OP_LD);
break;
case OPCODE_TXB:
- emit_tex(fp, fpi, R300_FPITX_OP_TXB);
+ emit_tex(fp, fpi, R300_TEX_OP_TXB);
break;
case OPCODE_TXP:
- emit_tex(fp, fpi, R300_FPITX_OP_TXP);
+ emit_tex(fp, fpi, R300_TEX_OP_TXP);
break;
case OPCODE_XPD:{
src[0] = t_src(fp, fpi->SrcReg[0]);
@@ -2282,18 +2281,18 @@ static void dump_program(struct r300_fragment_program *fp)
const char *instr;
switch ((fp->tex.
- inst[i] >> R300_FPITX_OPCODE_SHIFT) &
+ inst[i] >> R300_TEX_INST_SHIFT) &
15) {
- case R300_FPITX_OP_TEX:
+ case R300_TEX_OP_LD:
instr = "TEX";
break;
- case R300_FPITX_OP_KIL:
+ case R300_TEX_OP_KIL:
instr = "KIL";
break;
- case R300_FPITX_OP_TXP:
+ case R300_TEX_OP_TXP:
instr = "TXP";
break;
- case R300_FPITX_OP_TXB:
+ case R300_TEX_OP_TXB:
instr = "TXB";
break;
default:
@@ -2304,15 +2303,13 @@ static void dump_program(struct r300_fragment_program *fp)
" %s t%i, %c%i, texture[%i] (%08x)\n",
instr,
(fp->tex.
- inst[i] >> R300_FPITX_DST_SHIFT) & 31,
- (fp->tex.
- inst[i] & R300_FPITX_SRC_CONST) ? 'c' :
+ inst[i] >> R300_DST_ADDR_SHIFT) & 31,
't',
(fp->tex.
- inst[i] >> R300_FPITX_SRC_SHIFT) & 31,
+ inst[i] >> R300_SRC_ADDR_SHIFT) & 31,
(fp->tex.
- inst[i] & R300_FPITX_IMAGE_MASK) >>
- R300_FPITX_IMAGE_SHIFT,
+ inst[i] & R300_TEX_ID_MASK) >>
+ R300_TEX_ID_SHIFT,
fp->tex.inst[i]);
}
}
@@ -2338,45 +2335,45 @@ static void dump_program(struct r300_fragment_program *fp)
dstc[0] = 0;
sprintf(flags, "%s%s%s",
(fp->alu.inst[i].
- inst1 & R300_FPI1_DSTC_REG_X) ? "x" : "",
+ inst1 & R300_ALU_DSTC_REG_X) ? "x" : "",
(fp->alu.inst[i].
- inst1 & R300_FPI1_DSTC_REG_Y) ? "y" : "",
+ inst1 & R300_ALU_DSTC_REG_Y) ? "y" : "",
(fp->alu.inst[i].
- inst1 & R300_FPI1_DSTC_REG_Z) ? "z" : "");
+ inst1 & R300_ALU_DSTC_REG_Z) ? "z" : "");
if (flags[0] != 0) {
sprintf(dstc, "t%i.%s ",
(fp->alu.inst[i].
- inst1 >> R300_FPI1_DSTC_SHIFT) & 31,
+ inst1 >> R300_ALU_DSTC_SHIFT) & 31,
flags);
}
sprintf(flags, "%s%s%s",
(fp->alu.inst[i].
- inst1 & R300_FPI1_DSTC_OUTPUT_X) ? "x" : "",
+ inst1 & R300_ALU_DSTC_OUTPUT_X) ? "x" : "",
(fp->alu.inst[i].
- inst1 & R300_FPI1_DSTC_OUTPUT_Y) ? "y" : "",
+ inst1 & R300_ALU_DSTC_OUTPUT_Y) ? "y" : "",
(fp->alu.inst[i].
- inst1 & R300_FPI1_DSTC_OUTPUT_Z) ? "z" : "");
+ inst1 & R300_ALU_DSTC_OUTPUT_Z) ? "z" : "");
if (flags[0] != 0) {
sprintf(tmp, "o%i.%s",
(fp->alu.inst[i].
- inst1 >> R300_FPI1_DSTC_SHIFT) & 31,
+ inst1 >> R300_ALU_DSTC_SHIFT) & 31,
flags);
strcat(dstc, tmp);
}
dsta[0] = 0;
- if (fp->alu.inst[i].inst3 & R300_FPI3_DSTA_REG) {
+ if (fp->alu.inst[i].inst3 & R300_ALU_DSTA_REG) {
sprintf(dsta, "t%i.w ",
(fp->alu.inst[i].
- inst3 >> R300_FPI3_DSTA_SHIFT) & 31);
+ inst3 >> R300_ALU_DSTA_SHIFT) & 31);
}
- if (fp->alu.inst[i].inst3 & R300_FPI3_DSTA_OUTPUT) {
+ if (fp->alu.inst[i].inst3 & R300_ALU_DSTA_OUTPUT) {
sprintf(tmp, "o%i.w ",
(fp->alu.inst[i].
- inst3 >> R300_FPI3_DSTA_SHIFT) & 31);
+ inst3 >> R300_ALU_DSTA_SHIFT) & 31);
strcat(dsta, tmp);
}
- if (fp->alu.inst[i].inst3 & R300_FPI3_DSTA_DEPTH) {
+ if (fp->alu.inst[i].inst3 & R300_ALU_DSTA_DEPTH) {
strcat(dsta, "Z");
}
@@ -2396,19 +2393,19 @@ static void dump_program(struct r300_fragment_program *fp)
d = regc & 31;
if (d < 12) {
switch (d % 4) {
- case R300_FPI0_ARGC_SRC0C_XYZ:
+ case R300_ALU_ARGC_SRC0C_XYZ:
sprintf(buf, "%s.xyz",
srcc[d / 4]);
break;
- case R300_FPI0_ARGC_SRC0C_XXX:
+ case R300_ALU_ARGC_SRC0C_XXX:
sprintf(buf, "%s.xxx",
srcc[d / 4]);
break;
- case R300_FPI0_ARGC_SRC0C_YYY:
+ case R300_ALU_ARGC_SRC0C_YYY:
sprintf(buf, "%s.yyy",
srcc[d / 4]);
break;
- case R300_FPI0_ARGC_SRC0C_ZZZ:
+ case R300_ALU_ARGC_SRC0C_ZZZ:
sprintf(buf, "%s.zzz",
srcc[d / 4]);
break;
diff --git a/src/mesa/drivers/dri/r300/r300_fragprog.h b/src/mesa/drivers/dri/r300/r300_fragprog.h
index 73efe49fc17..573aacf19a1 100644
--- a/src/mesa/drivers/dri/r300/r300_fragprog.h
+++ b/src/mesa/drivers/dri/r300/r300_fragprog.h
@@ -75,23 +75,23 @@ typedef struct r300_fragment_program_swizzle {
#define SRC_STRIDE 6
#define NOP_INST0 ( \
- (R300_FPI0_OUTC_MAD) | \
- (R300_FPI0_ARGC_ZERO << R300_FPI0_ARG0C_SHIFT) | \
- (R300_FPI0_ARGC_ZERO << R300_FPI0_ARG1C_SHIFT) | \
- (R300_FPI0_ARGC_ZERO << R300_FPI0_ARG2C_SHIFT))
+ (R300_ALU_OUTC_MAD) | \
+ (R300_ALU_ARGC_ZERO << R300_ALU_ARG0C_SHIFT) | \
+ (R300_ALU_ARGC_ZERO << R300_ALU_ARG1C_SHIFT) | \
+ (R300_ALU_ARGC_ZERO << R300_ALU_ARG2C_SHIFT))
#define NOP_INST1 ( \
- ((0 | SRC_CONST) << R300_FPI1_SRC0C_SHIFT) | \
- ((0 | SRC_CONST) << R300_FPI1_SRC1C_SHIFT) | \
- ((0 | SRC_CONST) << R300_FPI1_SRC2C_SHIFT))
+ ((0 | SRC_CONST) << R300_ALU_SRC0C_SHIFT) | \
+ ((0 | SRC_CONST) << R300_ALU_SRC1C_SHIFT) | \
+ ((0 | SRC_CONST) << R300_ALU_SRC2C_SHIFT))
#define NOP_INST2 ( \
- (R300_FPI2_OUTA_MAD) | \
- (R300_FPI2_ARGA_ZERO << R300_FPI2_ARG0A_SHIFT) | \
- (R300_FPI2_ARGA_ZERO << R300_FPI2_ARG1A_SHIFT) | \
- (R300_FPI2_ARGA_ZERO << R300_FPI2_ARG2A_SHIFT))
+ (R300_ALU_OUTA_MAD) | \
+ (R300_ALU_ARGA_ZERO << R300_ALU_ARG0A_SHIFT) | \
+ (R300_ALU_ARGA_ZERO << R300_ALU_ARG1A_SHIFT) | \
+ (R300_ALU_ARGA_ZERO << R300_ALU_ARG2A_SHIFT))
#define NOP_INST3 ( \
- ((0 | SRC_CONST) << R300_FPI3_SRC0A_SHIFT) | \
- ((0 | SRC_CONST) << R300_FPI3_SRC1A_SHIFT) | \
- ((0 | SRC_CONST) << R300_FPI3_SRC2A_SHIFT))
+ ((0 | SRC_CONST) << R300_ALU_SRC0A_SHIFT) | \
+ ((0 | SRC_CONST) << R300_ALU_SRC1A_SHIFT) | \
+ ((0 | SRC_CONST) << R300_ALU_SRC2A_SHIFT))
#define DRI_CONF_FP_OPTIMIZATION_SPEED 0
#define DRI_CONF_FP_OPTIMIZATION_QUALITY 1
@@ -117,42 +117,42 @@ typedef struct r300_fragment_program_swizzle {
#define FP_SELC_MASK_XYZ 7
#define FP_SELC(destidx,regmask,outmask,src0,src1,src2) \
- (((destidx) << R300_FPI1_DSTC_SHIFT) | \
+ (((destidx) << R300_ALU_DSTC_SHIFT) | \
(FP_SELC_MASK_##regmask << 23) | \
(FP_SELC_MASK_##outmask << 26) | \
- ((src0) << R300_FPI1_SRC0C_SHIFT) | \
- ((src1) << R300_FPI1_SRC1C_SHIFT) | \
- ((src2) << R300_FPI1_SRC2C_SHIFT))
+ ((src0) << R300_ALU_SRC0C_SHIFT) | \
+ ((src1) << R300_ALU_SRC1C_SHIFT) | \
+ ((src2) << R300_ALU_SRC2C_SHIFT))
#define FP_SELA_MASK_NO 0
#define FP_SELA_MASK_W 1
#define FP_SELA(destidx,regmask,outmask,src0,src1,src2) \
- (((destidx) << R300_FPI3_DSTA_SHIFT) | \
+ (((destidx) << R300_ALU_DSTA_SHIFT) | \
(FP_SELA_MASK_##regmask << 23) | \
(FP_SELA_MASK_##outmask << 24) | \
- ((src0) << R300_FPI3_SRC0A_SHIFT) | \
- ((src1) << R300_FPI3_SRC1A_SHIFT) | \
- ((src2) << R300_FPI3_SRC2A_SHIFT))
+ ((src0) << R300_ALU_SRC0A_SHIFT) | \
+ ((src1) << R300_ALU_SRC1A_SHIFT) | \
+ ((src2) << R300_ALU_SRC2A_SHIFT))
/* Produce unshifted argument selectors */
-#define FP_ARGC(source) R300_FPI0_ARGC_##source
-#define FP_ARGA(source) R300_FPI2_ARGA_##source
+#define FP_ARGC(source) R300_ALU_ARGC_##source
+#define FP_ARGA(source) R300_ALU_ARGA_##source
#define FP_ABS(arg) ((arg) | (1 << 6))
#define FP_NEG(arg) ((arg) ^ (1 << 5))
/* Produce instruction dword */
#define FP_INSTRC(opcode,arg0,arg1,arg2) \
- (R300_FPI0_OUTC_##opcode | \
- ((arg0) << R300_FPI0_ARG0C_SHIFT) | \
- ((arg1) << R300_FPI0_ARG1C_SHIFT) | \
- ((arg2) << R300_FPI0_ARG2C_SHIFT))
+ (R300_ALU_OUTC_##opcode | \
+ ((arg0) << R300_ALU_ARG0C_SHIFT) | \
+ ((arg1) << R300_ALU_ARG1C_SHIFT) | \
+ ((arg2) << R300_ALU_ARG2C_SHIFT))
#define FP_INSTRA(opcode,arg0,arg1,arg2) \
- (R300_FPI2_OUTA_##opcode | \
- ((arg0) << R300_FPI2_ARG0A_SHIFT) | \
- ((arg1) << R300_FPI2_ARG1A_SHIFT) | \
- ((arg2) << R300_FPI2_ARG2A_SHIFT))
+ (R300_ALU_OUTA_##opcode | \
+ ((arg0) << R300_ALU_ARG0A_SHIFT) | \
+ ((arg1) << R300_ALU_ARG1A_SHIFT) | \
+ ((arg2) << R300_ALU_ARG2A_SHIFT))
#endif
diff --git a/src/mesa/drivers/dri/r300/r300_ioctl.c b/src/mesa/drivers/dri/r300/r300_ioctl.c
index 68f2437b86a..ede0bec5661 100644
--- a/src/mesa/drivers/dri/r300/r300_ioctl.c
+++ b/src/mesa/drivers/dri/r300/r300_ioctl.c
@@ -330,31 +330,31 @@ static void r300EmitClearState(GLcontext * ctx)
if (!is_r500) {
R300_STATECHANGE(r300, fp);
- reg_start(R300_PFS_CNTL_0, 2);
+ reg_start(R300_US_CONFIG, 2);
e32(0x0);
e32(0x0);
e32(0x0);
- reg_start(R300_PFS_NODE_0, 3);
+ reg_start(R300_US_CODE_ADDR_0, 3);
e32(0x0);
e32(0x0);
e32(0x0);
- e32(R300_PFS_NODE_OUTPUT_COLOR);
+ e32(R300_RGBA_OUT);
R300_STATECHANGE(r300, fpi[0]);
R300_STATECHANGE(r300, fpi[1]);
R300_STATECHANGE(r300, fpi[2]);
R300_STATECHANGE(r300, fpi[3]);
- reg_start(R300_PFS_INSTR0_0, 0);
+ reg_start(R300_US_ALU_RGB_INST_0, 0);
e32(FP_INSTRC(MAD, FP_ARGC(SRC0C_XYZ), FP_ARGC(ONE), FP_ARGC(ZERO)));
- reg_start(R300_PFS_INSTR1_0, 0);
+ reg_start(R300_US_ALU_RGB_ADDR_0, 0);
e32(FP_SELC(0, NO, XYZ, FP_TMP(0), 0, 0));
- reg_start(R300_PFS_INSTR2_0, 0);
+ reg_start(R300_US_ALU_ALPHA_INST_0, 0);
e32(FP_INSTRA(MAD, FP_ARGA(SRC0A), FP_ARGA(ONE), FP_ARGA(ZERO)));
- reg_start(R300_PFS_INSTR3_0, 0);
+ reg_start(R300_US_ALU_ALPHA_ADDR_0, 0);
e32(FP_SELA(0, NO, W, FP_TMP(0), 0, 0));
} else {
R300_STATECHANGE(r300, r500fp);
diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h
index ff2fc155245..558d3270285 100644
--- a/src/mesa/drivers/dri/r300/r300_reg.h
+++ b/src/mesa/drivers/dri/r300/r300_reg.h
@@ -1596,23 +1596,23 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
* offsets into the respective instruction streams, while *_END points to the
* last instruction relative to this offset.
*/
-#define R300_PFS_CNTL_0 0x4600
+#define R300_US_CONFIG 0x4600
# define R300_PFS_CNTL_LAST_NODES_SHIFT 0
# define R300_PFS_CNTL_LAST_NODES_MASK (3 << 0)
# define R300_PFS_CNTL_FIRST_NODE_HAS_TEX (1 << 3)
-#define R300_PFS_CNTL_1 0x4604
+#define R300_US_PIXSIZE 0x4604
/* There is an unshifted value here which has so far always been equal to the
* index of the highest used temporary register.
*/
-#define R300_PFS_CNTL_2 0x4608
+#define R300_US_CODE_OFFSET 0x4608
# define R300_PFS_CNTL_ALU_OFFSET_SHIFT 0
# define R300_PFS_CNTL_ALU_OFFSET_MASK (63 << 0)
# define R300_PFS_CNTL_ALU_END_SHIFT 6
# define R300_PFS_CNTL_ALU_END_MASK (63 << 6)
-# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 12
-# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 12) /* GUESS */
+# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 13
+# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 13)
# define R300_PFS_CNTL_TEX_END_SHIFT 18
-# define R300_PFS_CNTL_TEX_END_MASK (31 << 18) /* GUESS */
+# define R300_PFS_CNTL_TEX_END_MASK (31 << 18)
/* gap */
@@ -1623,70 +1623,65 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* Offsets are relative to the master offset from PFS_CNTL_2.
*/
-#define R300_PFS_NODE_0 0x4610
-#define R300_PFS_NODE_1 0x4614
-#define R300_PFS_NODE_2 0x4618
-#define R300_PFS_NODE_3 0x461C
-# define R300_PFS_NODE_ALU_OFFSET_SHIFT 0
-# define R300_PFS_NODE_ALU_OFFSET_MASK (63 << 0)
-# define R300_PFS_NODE_ALU_END_SHIFT 6
-# define R300_PFS_NODE_ALU_END_MASK (63 << 6)
-# define R300_PFS_NODE_TEX_OFFSET_SHIFT 12
-# define R300_PFS_NODE_TEX_OFFSET_MASK (31 << 12)
-# define R300_PFS_NODE_TEX_END_SHIFT 17
-# define R300_PFS_NODE_TEX_END_MASK (31 << 17)
-# define R300_PFS_NODE_OUTPUT_COLOR (1 << 22)
-# define R300_PFS_NODE_OUTPUT_DEPTH (1 << 23)
+#define R300_US_CODE_ADDR_0 0x4610
+#define R300_US_CODE_ADDR_1 0x4614
+#define R300_US_CODE_ADDR_2 0x4618
+#define R300_US_CODE_ADDR_3 0x461C
+# define R300_ALU_START_SHIFT 0
+# define R300_ALU_START_MASK (63 << 0)
+# define R300_ALU_SIZE_SHIFT 6
+# define R300_ALU_SIZE_MASK (63 << 6)
+# define R300_TEX_START_SHIFT 12
+# define R300_TEX_START_MASK (31 << 12)
+# define R300_TEX_SIZE_SHIFT 17
+# define R300_TEX_SIZE_MASK (31 << 17)
+# define R300_RGBA_OUT (1 << 22)
+# define R300_W_OUT (1 << 23)
/* TEX
* As far as I can tell, texture instructions cannot write into output
* registers directly. A subsequent ALU instruction is always necessary,
* even if it's just MAD o0, r0, 1, 0
*/
-#define R300_PFS_TEXI_0 0x4620
-# define R300_FPITX_SRC_SHIFT 0
-# define R300_FPITX_SRC_MASK (31 << 0)
- /* GUESS */
-# define R300_FPITX_SRC_CONST (1 << 5)
-# define R300_FPITX_DST_SHIFT 6
-# define R300_FPITX_DST_MASK (31 << 6)
-# define R300_FPITX_IMAGE_SHIFT 11
- /* GUESS based on layout and native limits */
-# define R300_FPITX_IMAGE_MASK (15 << 11)
-/* Unsure if these are opcodes, or some kind of bitfield, but this is how
- * they were set when I checked
- */
-# define R300_FPITX_OPCODE_SHIFT 15
-# define R300_FPITX_OP_TEX 1
-# define R300_FPITX_OP_KIL 2
-# define R300_FPITX_OP_TXP 3
-# define R300_FPITX_OP_TXB 4
-# define R300_FPITX_OPCODE_MASK (7 << 15)
+#define R300_US_TEX_INST_0 0x4620
+# define R300_SRC_ADDR_SHIFT 0
+# define R300_SRC_ADDR_MASK (31 << 0)
+# define R300_DST_ADDR_SHIFT 6
+# define R300_DST_ADDR_MASK (31 << 6)
+# define R300_TEX_ID_SHIFT 11
+# define R300_TEX_ID_MASK (15 << 11)
+# define R300_TEX_INST_SHIFT 15
+# define R300_TEX_OP_NOP 0
+# define R300_TEX_OP_LD 1
+# define R300_TEX_OP_KIL 2
+# define R300_TEX_OP_TXP 3
+# define R300_TEX_OP_TXB 4
+# define R300_TEX_INST_MASK (7 << 15)
/* Output format from the unfied shader */
-#define R500_US_OUT_FMT 0x46A4
-# define R500_US_OUT_FMT_C4_8 (0 << 0)
-# define R500_US_OUT_FMT_C4_10 (1 << 0)
-# define R500_US_OUT_FMT_C4_10_GAMMA (2 << 0)
-# define R500_US_OUT_FMT_C_16 (3 << 0)
-# define R500_US_OUT_FMT_C2_16 (4 << 0)
-# define R500_US_OUT_FMT_C4_16 (5 << 0)
-# define R500_US_OUT_FMT_C_16_MPEG (6 << 0)
-# define R500_US_OUT_FMT_C2_16_MPEG (7 << 0)
-# define R500_US_OUT_FMT_C2_4 (8 << 0)
-# define R500_US_OUT_FMT_C_3_3_2 (9 << 0)
-# define R500_US_OUT_FMT_C_6_5_6 (10 << 0)
-# define R500_US_OUT_FMT_C_11_11_10 (11 << 0)
-# define R500_US_OUT_FMT_C_10_11_11 (12 << 0)
-# define R500_US_OUT_FMT_C_2_10_10_10 (13 << 0)
+#define R300_US_OUT_FMT 0x46A4
+# define R300_US_OUT_FMT_C4_8 (0 << 0)
+# define R300_US_OUT_FMT_C4_10 (1 << 0)
+# define R300_US_OUT_FMT_C4_10_GAMMA (2 << 0)
+# define R300_US_OUT_FMT_C_16 (3 << 0)
+# define R300_US_OUT_FMT_C2_16 (4 << 0)
+# define R300_US_OUT_FMT_C4_16 (5 << 0)
+# define R300_US_OUT_FMT_C_16_MPEG (6 << 0)
+# define R300_US_OUT_FMT_C2_16_MPEG (7 << 0)
+# define R300_US_OUT_FMT_C2_4 (8 << 0)
+# define R300_US_OUT_FMT_C_3_3_2 (9 << 0)
+# define R300_US_OUT_FMT_C_6_5_6 (10 << 0)
+# define R300_US_OUT_FMT_C_11_11_10 (11 << 0)
+# define R300_US_OUT_FMT_C_10_11_11 (12 << 0)
+# define R300_US_OUT_FMT_C_2_10_10_10 (13 << 0)
/* reserved */
-# define R500_US_OUT_FMT_UNUSED (15 << 0)
-# define R500_US_OUT_FMT_C_16_FP (16 << 0)
-# define R500_US_OUT_FMT_C2_16_FP (17 << 0)
-# define R500_US_OUT_FMT_C4_16_FP (18 << 0)
-# define R500_US_OUT_FMT_C_32_FP (19 << 0)
-# define R500_US_OUT_FMT_C2_32_FP (20 << 0)
-# define R500_US_OUT_FMT_C4_32_FP (20 << 0)
+# define R300_US_OUT_FMT_UNUSED (15 << 0)
+# define R300_US_OUT_FMT_C_16_FP (16 << 0)
+# define R300_US_OUT_FMT_C2_16_FP (17 << 0)
+# define R300_US_OUT_FMT_C4_16_FP (18 << 0)
+# define R300_US_OUT_FMT_C_32_FP (19 << 0)
+# define R300_US_OUT_FMT_C2_32_FP (20 << 0)
+# define R300_US_OUT_FMT_C4_32_FP (20 << 0)
/* ALU
* The ALU instructions register blocks are enumerated according to the order
@@ -1752,147 +1747,189 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
* - Set FPI0/FPI2_SPECIAL_LRP
* Arbitrary LRP (including support for swizzling) requires vanilla MAD+MAD
*/
-#define R300_PFS_INSTR1_0 0x46C0
-# define R300_FPI1_SRC0C_SHIFT 0
-# define R300_FPI1_SRC0C_MASK (31 << 0)
-# define R300_FPI1_SRC0C_CONST (1 << 5)
-# define R300_FPI1_SRC1C_SHIFT 6
-# define R300_FPI1_SRC1C_MASK (31 << 6)
-# define R300_FPI1_SRC1C_CONST (1 << 11)
-# define R300_FPI1_SRC2C_SHIFT 12
-# define R300_FPI1_SRC2C_MASK (31 << 12)
-# define R300_FPI1_SRC2C_CONST (1 << 17)
-# define R300_FPI1_SRC_MASK 0x0003ffff
-# define R300_FPI1_DSTC_SHIFT 18
-# define R300_FPI1_DSTC_MASK (31 << 18)
-# define R300_FPI1_DSTC_REG_MASK_SHIFT 23
-# define R300_FPI1_DSTC_REG_X (1 << 23)
-# define R300_FPI1_DSTC_REG_Y (1 << 24)
-# define R300_FPI1_DSTC_REG_Z (1 << 25)
-# define R300_FPI1_DSTC_OUTPUT_MASK_SHIFT 26
-# define R300_FPI1_DSTC_OUTPUT_X (1 << 26)
-# define R300_FPI1_DSTC_OUTPUT_Y (1 << 27)
-# define R300_FPI1_DSTC_OUTPUT_Z (1 << 28)
-
-#define R300_PFS_INSTR3_0 0x47C0
-# define R300_FPI3_SRC0A_SHIFT 0
-# define R300_FPI3_SRC0A_MASK (31 << 0)
-# define R300_FPI3_SRC0A_CONST (1 << 5)
-# define R300_FPI3_SRC1A_SHIFT 6
-# define R300_FPI3_SRC1A_MASK (31 << 6)
-# define R300_FPI3_SRC1A_CONST (1 << 11)
-# define R300_FPI3_SRC2A_SHIFT 12
-# define R300_FPI3_SRC2A_MASK (31 << 12)
-# define R300_FPI3_SRC2A_CONST (1 << 17)
-# define R300_FPI3_SRC_MASK 0x0003ffff
-# define R300_FPI3_DSTA_SHIFT 18
-# define R300_FPI3_DSTA_MASK (31 << 18)
-# define R300_FPI3_DSTA_REG (1 << 23)
-# define R300_FPI3_DSTA_OUTPUT (1 << 24)
-# define R300_FPI3_DSTA_DEPTH (1 << 27)
-
-#define R300_PFS_INSTR0_0 0x48C0
-# define R300_FPI0_ARGC_SRC0C_XYZ 0
-# define R300_FPI0_ARGC_SRC0C_XXX 1
-# define R300_FPI0_ARGC_SRC0C_YYY 2
-# define R300_FPI0_ARGC_SRC0C_ZZZ 3
-# define R300_FPI0_ARGC_SRC1C_XYZ 4
-# define R300_FPI0_ARGC_SRC1C_XXX 5
-# define R300_FPI0_ARGC_SRC1C_YYY 6
-# define R300_FPI0_ARGC_SRC1C_ZZZ 7
-# define R300_FPI0_ARGC_SRC2C_XYZ 8
-# define R300_FPI0_ARGC_SRC2C_XXX 9
-# define R300_FPI0_ARGC_SRC2C_YYY 10
-# define R300_FPI0_ARGC_SRC2C_ZZZ 11
-# define R300_FPI0_ARGC_SRC0A 12
-# define R300_FPI0_ARGC_SRC1A 13
-# define R300_FPI0_ARGC_SRC2A 14
-# define R300_FPI0_ARGC_SRC1C_LRP 15
-# define R300_FPI0_ARGC_ZERO 20
-# define R300_FPI0_ARGC_ONE 21
- /* GUESS */
-# define R300_FPI0_ARGC_HALF 22
-# define R300_FPI0_ARGC_SRC0C_YZX 23
-# define R300_FPI0_ARGC_SRC1C_YZX 24
-# define R300_FPI0_ARGC_SRC2C_YZX 25
-# define R300_FPI0_ARGC_SRC0C_ZXY 26
-# define R300_FPI0_ARGC_SRC1C_ZXY 27
-# define R300_FPI0_ARGC_SRC2C_ZXY 28
-# define R300_FPI0_ARGC_SRC0CA_WZY 29
-# define R300_FPI0_ARGC_SRC1CA_WZY 30
-# define R300_FPI0_ARGC_SRC2CA_WZY 31
-
-# define R300_FPI0_ARG0C_SHIFT 0
-# define R300_FPI0_ARG0C_MASK (31 << 0)
-# define R300_FPI0_ARG0C_NEG (1 << 5)
-# define R300_FPI0_ARG0C_ABS (1 << 6)
-# define R300_FPI0_ARG1C_SHIFT 7
-# define R300_FPI0_ARG1C_MASK (31 << 7)
-# define R300_FPI0_ARG1C_NEG (1 << 12)
-# define R300_FPI0_ARG1C_ABS (1 << 13)
-# define R300_FPI0_ARG2C_SHIFT 14
-# define R300_FPI0_ARG2C_MASK (31 << 14)
-# define R300_FPI0_ARG2C_NEG (1 << 19)
-# define R300_FPI0_ARG2C_ABS (1 << 20)
-# define R300_FPI0_SPECIAL_LRP (1 << 21)
-# define R300_FPI0_OUTC_MAD (0 << 23)
-# define R300_FPI0_OUTC_DP3 (1 << 23)
-# define R300_FPI0_OUTC_DP4 (2 << 23)
-# define R300_FPI0_OUTC_MIN (4 << 23)
-# define R300_FPI0_OUTC_MAX (5 << 23)
-# define R300_FPI0_OUTC_CMPH (7 << 23)
-# define R300_FPI0_OUTC_CMP (8 << 23)
-# define R300_FPI0_OUTC_FRC (9 << 23)
-# define R300_FPI0_OUTC_REPL_ALPHA (10 << 23)
-# define R300_FPI0_OUTC_SAT (1 << 30)
-# define R300_FPI0_INSERT_NOP (1 << 31)
-
-#define R300_PFS_INSTR2_0 0x49C0
-# define R300_FPI2_ARGA_SRC0C_X 0
-# define R300_FPI2_ARGA_SRC0C_Y 1
-# define R300_FPI2_ARGA_SRC0C_Z 2
-# define R300_FPI2_ARGA_SRC1C_X 3
-# define R300_FPI2_ARGA_SRC1C_Y 4
-# define R300_FPI2_ARGA_SRC1C_Z 5
-# define R300_FPI2_ARGA_SRC2C_X 6
-# define R300_FPI2_ARGA_SRC2C_Y 7
-# define R300_FPI2_ARGA_SRC2C_Z 8
-# define R300_FPI2_ARGA_SRC0A 9
-# define R300_FPI2_ARGA_SRC1A 10
-# define R300_FPI2_ARGA_SRC2A 11
-# define R300_FPI2_ARGA_SRC1A_LRP 15
-# define R300_FPI2_ARGA_ZERO 16
-# define R300_FPI2_ARGA_ONE 17
- /* GUESS */
-# define R300_FPI2_ARGA_HALF 18
-# define R300_FPI2_ARG0A_SHIFT 0
-# define R300_FPI2_ARG0A_MASK (31 << 0)
-# define R300_FPI2_ARG0A_NEG (1 << 5)
- /* GUESS */
-# define R300_FPI2_ARG0A_ABS (1 << 6)
-# define R300_FPI2_ARG1A_SHIFT 7
-# define R300_FPI2_ARG1A_MASK (31 << 7)
-# define R300_FPI2_ARG1A_NEG (1 << 12)
- /* GUESS */
-# define R300_FPI2_ARG1A_ABS (1 << 13)
-# define R300_FPI2_ARG2A_SHIFT 14
-# define R300_FPI2_ARG2A_MASK (31 << 14)
-# define R300_FPI2_ARG2A_NEG (1 << 19)
- /* GUESS */
-# define R300_FPI2_ARG2A_ABS (1 << 20)
-# define R300_FPI2_SPECIAL_LRP (1 << 21)
-# define R300_FPI2_OUTA_MAD (0 << 23)
-# define R300_FPI2_OUTA_DP4 (1 << 23)
-# define R300_FPI2_OUTA_MIN (2 << 23)
-# define R300_FPI2_OUTA_MAX (3 << 23)
-# define R300_FPI2_OUTA_CMP (6 << 23)
-# define R300_FPI2_OUTA_FRC (7 << 23)
-# define R300_FPI2_OUTA_EX2 (8 << 23)
-# define R300_FPI2_OUTA_LG2 (9 << 23)
-# define R300_FPI2_OUTA_RCP (10 << 23)
-# define R300_FPI2_OUTA_RSQ (11 << 23)
-# define R300_FPI2_OUTA_SAT (1 << 30)
-# define R300_FPI2_UNKNOWN_31 (1 << 31)
+#define R300_US_ALU_RGB_ADDR_0 0x46C0
+# define R300_ALU_SRC0C_SHIFT 0
+# define R300_ALU_SRC0C_MASK (31 << 0)
+# define R300_ALU_SRC0C_CONST (1 << 5)
+# define R300_ALU_SRC1C_SHIFT 6
+# define R300_ALU_SRC1C_MASK (31 << 6)
+# define R300_ALU_SRC1C_CONST (1 << 11)
+# define R300_ALU_SRC2C_SHIFT 12
+# define R300_ALU_SRC2C_MASK (31 << 12)
+# define R300_ALU_SRC2C_CONST (1 << 17)
+# define R300_ALU_SRC_MASK 0x0003ffff
+# define R300_ALU_DSTC_SHIFT 18
+# define R300_ALU_DSTC_MASK (31 << 18)
+# define R300_ALU_DSTC_REG_MASK_SHIFT 23
+# define R300_ALU_DSTC_REG_X (1 << 23)
+# define R300_ALU_DSTC_REG_Y (1 << 24)
+# define R300_ALU_DSTC_REG_Z (1 << 25)
+# define R300_ALU_DSTC_OUTPUT_MASK_SHIFT 26
+# define R300_ALU_DSTC_OUTPUT_X (1 << 26)
+# define R300_ALU_DSTC_OUTPUT_Y (1 << 27)
+# define R300_ALU_DSTC_OUTPUT_Z (1 << 28)
+
+#define R300_US_ALU_ALPHA_ADDR_0 0x47C0
+# define R300_ALU_SRC0A_SHIFT 0
+# define R300_ALU_SRC0A_MASK (31 << 0)
+# define R300_ALU_SRC0A_CONST (1 << 5)
+# define R300_ALU_SRC1A_SHIFT 6
+# define R300_ALU_SRC1A_MASK (31 << 6)
+# define R300_ALU_SRC1A_CONST (1 << 11)
+# define R300_ALU_SRC2A_SHIFT 12
+# define R300_ALU_SRC2A_MASK (31 << 12)
+# define R300_ALU_SRC2A_CONST (1 << 17)
+# define R300_ALU_SRC_MASK 0x0003ffff
+# define R300_ALU_DSTA_SHIFT 18
+# define R300_ALU_DSTA_MASK (31 << 18)
+# define R300_ALU_DSTA_REG (1 << 23)
+# define R300_ALU_DSTA_OUTPUT (1 << 24)
+# define R300_ALU_DSTA_DEPTH (1 << 27)
+
+#define R300_US_ALU_RGB_INST_0 0x48C0
+# define R300_ALU_ARGC_SRC0C_XYZ 0
+# define R300_ALU_ARGC_SRC0C_XXX 1
+# define R300_ALU_ARGC_SRC0C_YYY 2
+# define R300_ALU_ARGC_SRC0C_ZZZ 3
+# define R300_ALU_ARGC_SRC1C_XYZ 4
+# define R300_ALU_ARGC_SRC1C_XXX 5
+# define R300_ALU_ARGC_SRC1C_YYY 6
+# define R300_ALU_ARGC_SRC1C_ZZZ 7
+# define R300_ALU_ARGC_SRC2C_XYZ 8
+# define R300_ALU_ARGC_SRC2C_XXX 9
+# define R300_ALU_ARGC_SRC2C_YYY 10
+# define R300_ALU_ARGC_SRC2C_ZZZ 11
+# define R300_ALU_ARGC_SRC0A 12
+# define R300_ALU_ARGC_SRC1A 13
+# define R300_ALU_ARGC_SRC2A 14
+# define R300_ALU_ARGC_SRCP_XYZ 15
+# define R300_ALU_ARGC_SRCP_XXX 16
+# define R300_ALU_ARGC_SRCP_YYY 17
+# define R300_ALU_ARGC_SRCP_ZZZ 18
+# define R300_ALU_ARGC_SRCP_WWW 19
+# define R300_ALU_ARGC_ZERO 20
+# define R300_ALU_ARGC_ONE 21
+# define R300_ALU_ARGC_HALF 22
+# define R300_ALU_ARGC_SRC0C_YZX 23
+# define R300_ALU_ARGC_SRC1C_YZX 24
+# define R300_ALU_ARGC_SRC2C_YZX 25
+# define R300_ALU_ARGC_SRC0C_ZXY 26
+# define R300_ALU_ARGC_SRC1C_ZXY 27
+# define R300_ALU_ARGC_SRC2C_ZXY 28
+# define R300_ALU_ARGC_SRC0CA_WZY 29
+# define R300_ALU_ARGC_SRC1CA_WZY 30
+# define R300_ALU_ARGC_SRC2CA_WZY 31
+
+# define R300_ALU_ARG0C_SHIFT 0
+# define R300_ALU_ARG0C_MASK (31 << 0)
+# define R300_ALU_ARG0C_NOP (0 << 5)
+# define R300_ALU_ARG0C_NEG (1 << 5)
+# define R300_ALU_ARG0C_ABS (2 << 5)
+# define R300_ALU_ARG0C_NAB (3 << 5)
+# define R300_ALU_ARG1C_SHIFT 7
+# define R300_ALU_ARG1C_MASK (31 << 7)
+# define R300_ALU_ARG1C_NOP (0 << 12)
+# define R300_ALU_ARG1C_NEG (1 << 12)
+# define R300_ALU_ARG1C_ABS (2 << 12)
+# define R300_ALU_ARG1C_NAB (3 << 12)
+# define R300_ALU_ARG2C_SHIFT 14
+# define R300_ALU_ARG2C_MASK (31 << 14)
+# define R300_ALU_ARG2C_NOP (0 << 19)
+# define R300_ALU_ARG2C_NEG (1 << 19)
+# define R300_ALU_ARG2C_ABS (2 << 19)
+# define R300_ALU_ARG2C_NAB (3 << 19)
+# define R300_ALU_SRCP_1_MINUS_2_SRC0 (0 << 21)
+# define R300_ALU_SRCP_SRC1_MINUS_SRC0 (1 << 21)
+# define R300_ALU_SRCP_SRC1_PLUS_SRC0 (2 << 21)
+# define R300_ALU_SRCP_1_MINUS_SRC0 (3 << 21)
+
+# define R300_ALU_OUTC_MAD (0 << 23)
+# define R300_ALU_OUTC_DP3 (1 << 23)
+# define R300_ALU_OUTC_DP4 (2 << 23)
+# define R300_ALU_OUTC_D2A (3 << 23)
+# define R300_ALU_OUTC_MIN (4 << 23)
+# define R300_ALU_OUTC_MAX (5 << 23)
+# define R300_ALU_OUTC_CMPH (7 << 23)
+# define R300_ALU_OUTC_CMP (8 << 23)
+# define R300_ALU_OUTC_FRC (9 << 23)
+# define R300_ALU_OUTC_REPL_ALPHA (10 << 23)
+
+# define R300_ALU_OUTC_MOD_NOP (0 << 27)
+# define R300_ALU_OUTC_MOD_MUL2 (1 << 27)
+# define R300_ALU_OUTC_MOD_MUL4 (2 << 27)
+# define R300_ALU_OUTC_MOD_MUL8 (3 << 27)
+# define R300_ALU_OUTC_MOD_DIV2 (4 << 27)
+# define R300_ALU_OUTC_MOD_DIV4 (5 << 27)
+# define R300_ALU_OUTC_MOD_DIV8 (6 << 27)
+
+# define R300_ALU_OUTC_CLAMP (1 << 30)
+# define R300_ALU_INSERT_NOP (1 << 31)
+
+#define R300_US_ALU_ALPHA_INST_0 0x49C0
+# define R300_ALU_ARGA_SRC0C_X 0
+# define R300_ALU_ARGA_SRC0C_Y 1
+# define R300_ALU_ARGA_SRC0C_Z 2
+# define R300_ALU_ARGA_SRC1C_X 3
+# define R300_ALU_ARGA_SRC1C_Y 4
+# define R300_ALU_ARGA_SRC1C_Z 5
+# define R300_ALU_ARGA_SRC2C_X 6
+# define R300_ALU_ARGA_SRC2C_Y 7
+# define R300_ALU_ARGA_SRC2C_Z 8
+# define R300_ALU_ARGA_SRC0A 9
+# define R300_ALU_ARGA_SRC1A 10
+# define R300_ALU_ARGA_SRC2A 11
+# define R300_ALU_ARGA_SRCP_X 12
+# define R300_ALU_ARGA_SRCP_Y 13
+# define R300_ALU_ARGA_SRCP_Z 14
+# define R300_ALU_ARGA_SRCP_W 15
+
+# define R300_ALU_ARGA_ZERO 16
+# define R300_ALU_ARGA_ONE 17
+# define R300_ALU_ARGA_HALF 18
+# define R300_ALU_ARG0A_SHIFT 0
+# define R300_ALU_ARG0A_MASK (31 << 0)
+# define R300_ALU_ARG0A_NOP (0 << 5)
+# define R300_ALU_ARG0A_NEG (1 << 5)
+# define R300_ALU_ARG0A_ABS (2 << 5)
+# define R300_ALU_ARG0A_NAB (3 << 5)
+# define R300_ALU_ARG1A_SHIFT 7
+# define R300_ALU_ARG1A_MASK (31 << 7)
+# define R300_ALU_ARG1A_NOP (0 << 12)
+# define R300_ALU_ARG1A_NEG (1 << 12)
+# define R300_ALU_ARG1A_ABS (2 << 12)
+# define R300_ALU_ARG1A_NAB (3 << 12)
+# define R300_ALU_ARG2A_SHIFT 14
+# define R300_ALU_ARG2A_MASK (31 << 14)
+# define R300_ALU_ARG2A_NOP (0 << 19)
+# define R300_ALU_ARG2A_NEG (1 << 19)
+# define R300_ALU_ARG2A_ABS (2 << 19)
+# define R300_ALU_ARG2A_NAB (3 << 19)
+# define R300_ALU_SRCP_1_MINUS_2_SRC0 (0 << 21)
+# define R300_ALU_SRCP_SRC1_MINUS_SRC0 (1 << 21)
+# define R300_ALU_SRCP_SRC1_PLUS_SRC0 (2 << 21)
+# define R300_ALU_SRCP_1_MINUS_SRC0 (3 << 21)
+
+# define R300_ALU_OUTA_MAD (0 << 23)
+# define R300_ALU_OUTA_DP4 (1 << 23)
+# define R300_ALU_OUTA_MIN (2 << 23)
+# define R300_ALU_OUTA_MAX (3 << 23)
+# define R300_ALU_OUTA_CND (5 << 23)
+# define R300_ALU_OUTA_CMP (6 << 23)
+# define R300_ALU_OUTA_FRC (7 << 23)
+# define R300_ALU_OUTA_EX2 (8 << 23)
+# define R300_ALU_OUTA_LG2 (9 << 23)
+# define R300_ALU_OUTA_RCP (10 << 23)
+# define R300_ALU_OUTA_RSQ (11 << 23)
+
+# define R300_ALU_OUTA_MOD_NOP (0 << 27)
+# define R300_ALU_OUTA_MOD_MUL2 (1 << 27)
+# define R300_ALU_OUTA_MOD_MUL4 (2 << 27)
+# define R300_ALU_OUTA_MOD_MUL8 (3 << 27)
+# define R300_ALU_OUTA_MOD_DIV2 (4 << 27)
+# define R300_ALU_OUTA_MOD_DIV4 (5 << 27)
+# define R300_ALU_OUTA_MOD_DIV8 (6 << 27)
+
+# define R300_ALU_OUTA_CLAMP (1 << 30)
/* END: Fragment program instruction set */
/* Fog: Fog Blending Enable */
@@ -1967,7 +2004,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
#define R300_PFS_PARAM_0_Y 0x4C04
#define R300_PFS_PARAM_0_Z 0x4C08
#define R300_PFS_PARAM_0_W 0x4C0C
-/* GUESS: PARAM_31 is last, based on native limits reported by fglrx */
+/* last consts */
#define R300_PFS_PARAM_31_X 0x4DF0
#define R300_PFS_PARAM_31_Y 0x4DF4
#define R300_PFS_PARAM_31_Z 0x4DF8
@@ -3103,12 +3140,12 @@ enum {
# define R500_TEX_SEM_ACQUIRE (1 << 25)
# define R500_TEX_IGNORE_UNCOVERED (1 << 26)
# define R500_TEX_UNSCALED (1 << 27)
-#define R500_US_W_FMT 0x46b4
-# define R500_W_FMT_W0 (0 << 0)
-# define R500_W_FMT_W24 (1 << 0)
-# define R500_W_FMT_W24FP (2 << 0)
-# define R500_W_SRC_US (0 << 2)
-# define R500_W_SRC_RAS (1 << 2)
+#define R300_US_W_FMT 0x46b4
+# define R300_W_FMT_W0 (0 << 0)
+# define R300_W_FMT_W24 (1 << 0)
+# define R300_W_FMT_W24FP (2 << 0)
+# define R300_W_SRC_US (0 << 2)
+# define R300_W_SRC_RAS (1 << 2)
/* Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR.
diff --git a/src/mesa/drivers/dri/r300/r300_state.c b/src/mesa/drivers/dri/r300/r300_state.c
index 012c8d5e3f4..e060523ff84 100644
--- a/src/mesa/drivers/dri/r300/r300_state.c
+++ b/src/mesa/drivers/dri/r300/r300_state.c
@@ -1445,21 +1445,21 @@ static void r300SetupTextures(GLcontext * ctx)
int opcode;
unsigned long val;
- unit = fp->tex.inst[i] >> R300_FPITX_IMAGE_SHIFT;
+ unit = fp->tex.inst[i] >> R300_TEX_ID_SHIFT;
unit &= 15;
val = fp->tex.inst[i];
- val &= ~R300_FPITX_IMAGE_MASK;
+ val &= ~R300_TEX_ID_MASK;
opcode =
- (val & R300_FPITX_OPCODE_MASK) >> R300_FPITX_OPCODE_SHIFT;
- if (opcode == R300_FPITX_OP_KIL) {
+ (val & R300_TEX_INST_MASK) >> R300_TEX_INST_SHIFT;
+ if (opcode == R300_TEX_OP_KIL) {
r300->hw.fpt.cmd[R300_FPT_INSTR_0 + i] = val;
} else {
if (tmu_mappings[unit] >= 0) {
val |=
tmu_mappings[unit] <<
- R300_FPITX_IMAGE_SHIFT;
+ R300_TEX_ID_SHIFT;
r300->hw.fpt.cmd[R300_FPT_INSTR_0 + i] = val;
} else {
// We get here when the corresponding texture image is incomplete
@@ -1470,7 +1470,7 @@ static void r300SetupTextures(GLcontext * ctx)
}
r300->hw.fpt.cmd[R300_FPT_CMD_0] =
- cmdpacket0(R300_PFS_TEXI_0, fp->tex.length);
+ cmdpacket0(R300_US_TEX_INST_0, fp->tex.length);
}
if (RADEON_DEBUG & DEBUG_STATE)
@@ -2371,25 +2371,25 @@ static void r300SetupPixelShader(r300ContextPtr rmesa)
}
R300_STATECHANGE(rmesa, fpi[0]);
- rmesa->hw.fpi[0].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR0_0, fp->alu_end + 1);
+ rmesa->hw.fpi[0].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_RGB_INST_0, fp->alu_end + 1);
for (i = 0; i <= fp->alu_end; i++) {
rmesa->hw.fpi[0].cmd[R300_FPI_INSTR_0 + i] = fp->alu.inst[i].inst0;
}
R300_STATECHANGE(rmesa, fpi[1]);
- rmesa->hw.fpi[1].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR1_0, fp->alu_end + 1);
+ rmesa->hw.fpi[1].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_RGB_ADDR_0, fp->alu_end + 1);
for (i = 0; i <= fp->alu_end; i++) {
rmesa->hw.fpi[1].cmd[R300_FPI_INSTR_0 + i] = fp->alu.inst[i].inst1;
}
R300_STATECHANGE(rmesa, fpi[2]);
- rmesa->hw.fpi[2].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR2_0, fp->alu_end + 1);
+ rmesa->hw.fpi[2].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_ALPHA_INST_0, fp->alu_end + 1);
for (i = 0; i <= fp->alu_end; i++) {
rmesa->hw.fpi[2].cmd[R300_FPI_INSTR_0 + i] = fp->alu.inst[i].inst2;
}
R300_STATECHANGE(rmesa, fpi[3]);
- rmesa->hw.fpi[3].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_PFS_INSTR3_0, fp->alu_end + 1);
+ rmesa->hw.fpi[3].cmd[R300_FPI_CMD_0] = cmdpacket0(R300_US_ALU_ALPHA_ADDR_0, fp->alu_end + 1);
for (i = 0; i <= fp->alu_end; i++) {
rmesa->hw.fpi[3].cmd[R300_FPI_INSTR_0 + i] = fp->alu.inst[i].inst3;
}
@@ -2406,10 +2406,10 @@ static void r300SetupPixelShader(r300ContextPtr rmesa)
for (i = 0, k = (4 - (fp->cur_node + 1)); i < 4; i++, k++) {
if (i < (fp->cur_node + 1)) {
rmesa->hw.fp.cmd[R300_FP_NODE0 + k] =
- (fp->node[i].alu_offset << R300_PFS_NODE_ALU_OFFSET_SHIFT) |
- (fp->node[i].alu_end << R300_PFS_NODE_ALU_END_SHIFT) |
- (fp->node[i].tex_offset << R300_PFS_NODE_TEX_OFFSET_SHIFT) |
- (fp->node[i].tex_end << R300_PFS_NODE_TEX_END_SHIFT) |
+ (fp->node[i].alu_offset << R300_ALU_START_SHIFT) |
+ (fp->node[i].alu_end << R300_ALU_SIZE_SHIFT) |
+ (fp->node[i].tex_offset << R300_TEX_START_SHIFT) |
+ (fp->node[i].tex_end << R300_TEX_SIZE_SHIFT) |
fp->node[i].flags;
} else {
rmesa->hw.fp.cmd[R300_FP_NODE0 + (3 - i)] = 0;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 03:38:54 +0000