summaryrefslogtreecommitdiffstats
path: root/src/gallium/drivers/r300/r300_reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'src/gallium/drivers/r300/r300_reg.h')
-rw-r--r--src/gallium/drivers/r300/r300_reg.h88
1 files changed, 44 insertions, 44 deletions
diff --git a/src/gallium/drivers/r300/r300_reg.h b/src/gallium/drivers/r300/r300_reg.h
index 468e0a2e44b..be26b13b0b0 100644
--- a/src/gallium/drivers/r300/r300_reg.h
+++ b/src/gallium/drivers/r300/r300_reg.h
@@ -64,7 +64,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
#define R300_SE_VPORT_ZSCALE 0x1DA8
#define R300_SE_VPORT_ZOFFSET 0x1DAC
-
+#define R300_VAP_PORT_IDX0 0x2040
/*
* Vertex Array Processing (VAP) Control
*/
@@ -732,8 +732,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
#define R500_RS_IP_TEX_PTR_Q_SHIFT 18
#define R500_RS_IP_COL_PTR_SHIFT 24
#define R500_RS_IP_COL_FMT_SHIFT 27
-# define R500_RS_COL_PTR(x) (x << 24)
-# define R500_RS_COL_FMT(x) (x << 27)
+# define R500_RS_COL_PTR(x) ((x) << 24)
+# define R500_RS_COL_FMT(x) ((x) << 27)
/* gap */
#define R500_RS_IP_OFFSET_DIS (0 << 31)
#define R500_RS_IP_OFFSET_EN (1 << 31)
@@ -1175,8 +1175,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
# define R300_RS_INTERP_SRC_SHIFT 2 /* TODO: check for removal */
# define R300_RS_INTERP_SRC_MASK (7 << 2) /* TODO: check for removal */
# define R300_RS_TEX_PTR(x) (x << 0)
-# define R300_RS_COL_PTR(x) (x << 6)
-# define R300_RS_COL_FMT(x) (x << 9)
+# define R300_RS_COL_PTR(x) ((x) << 6)
+# define R300_RS_COL_FMT(x) ((x) << 9)
# define R300_RS_COL_FMT_RGBA 0
# define R300_RS_COL_FMT_RGB0 1
# define R300_RS_COL_FMT_RGB1 2
@@ -1186,10 +1186,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
# define R300_RS_COL_FMT_111A 8
# define R300_RS_COL_FMT_1110 9
# define R300_RS_COL_FMT_1111 10
-# define R300_RS_SEL_S(x) (x << 13)
-# define R300_RS_SEL_T(x) (x << 16)
-# define R300_RS_SEL_R(x) (x << 19)
-# define R300_RS_SEL_Q(x) (x << 22)
+# define R300_RS_SEL_S(x) ((x) << 13)
+# define R300_RS_SEL_T(x) ((x) << 16)
+# define R300_RS_SEL_R(x) ((x) << 19)
+# define R300_RS_SEL_Q(x) ((x) << 22)
# define R300_RS_SEL_C0 0
# define R300_RS_SEL_C1 1
# define R300_RS_SEL_C2 2
@@ -1708,7 +1708,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
# define R300_C3_SEL_R (1 << 14)
# define R300_C3_SEL_G (2 << 14)
# define R300_C3_SEL_B (3 << 14)
-# define R300_OUT_SIGN(x) (x << 16)
+# define R300_OUT_SIGN(x) ((x) << 16)
# define R500_ROUND_ADJ (1 << 20)
/* ALU
@@ -2732,7 +2732,7 @@ enum {
# define R500_ALPHA_OP_COS 13
# define R500_ALPHA_OP_MDH 14
# define R500_ALPHA_OP_MDV 15
-# define R500_ALPHA_ADDRD(x) (x << 4)
+# define R500_ALPHA_ADDRD(x) ((x) << 4)
# define R500_ALPHA_ADDRD_REL (1 << 11)
# define R500_ALPHA_SEL_A_SHIFT 12
# define R500_ALPHA_SEL_A_SRC0 (0 << 12)
@@ -2776,16 +2776,16 @@ enum {
# define R500_ALPHA_OMOD_DIV_4 (5 << 26)
# define R500_ALPHA_OMOD_DIV_8 (6 << 26)
# define R500_ALPHA_OMOD_DISABLE (7 << 26)
-# define R500_ALPHA_TARGET(x) (x << 29)
+# define R500_ALPHA_TARGET(x) ((x) << 29)
# define R500_ALPHA_W_OMASK (1 << 31)
#define R500_US_ALU_ALPHA_ADDR_0 0x9800
-# define R500_ALPHA_ADDR0(x) (x << 0)
+# define R500_ALPHA_ADDR0(x) ((x) << 0)
# define R500_ALPHA_ADDR0_CONST (1 << 8)
# define R500_ALPHA_ADDR0_REL (1 << 9)
-# define R500_ALPHA_ADDR1(x) (x << 10)
+# define R500_ALPHA_ADDR1(x) ((x) << 10)
# define R500_ALPHA_ADDR1_CONST (1 << 18)
# define R500_ALPHA_ADDR1_REL (1 << 19)
-# define R500_ALPHA_ADDR2(x) (x << 20)
+# define R500_ALPHA_ADDR2(x) ((x) << 20)
# define R500_ALPHA_ADDR2_CONST (1 << 28)
# define R500_ALPHA_ADDR2_REL (1 << 29)
# define R500_ALPHA_SRCP_OP_1_MINUS_2A0 (0 << 30)
@@ -2806,7 +2806,7 @@ enum {
# define R500_ALU_RGBA_OP_SOP (10 << 0)
# define R500_ALU_RGBA_OP_MDH (11 << 0)
# define R500_ALU_RGBA_OP_MDV (12 << 0)
-# define R500_ALU_RGBA_ADDRD(x) (x << 4)
+# define R500_ALU_RGBA_ADDRD(x) ((x) << 4)
# define R500_ALU_RGBA_ADDRD_REL (1 << 11)
# define R500_ALU_RGBA_SEL_C_SHIFT 12
# define R500_ALU_RGBA_SEL_C_SRC0 (0 << 12)
@@ -2933,16 +2933,16 @@ enum {
# define R500_ALU_RGB_OMOD_DIV_4 (5 << 26)
# define R500_ALU_RGB_OMOD_DIV_8 (6 << 26)
# define R500_ALU_RGB_OMOD_DISABLE (7 << 26)
-# define R500_ALU_RGB_TARGET(x) (x << 29)
+# define R500_ALU_RGB_TARGET(x) ((x) << 29)
# define R500_ALU_RGB_WMASK (1 << 31)
#define R500_US_ALU_RGB_ADDR_0 0x9000
-# define R500_RGB_ADDR0(x) (x << 0)
+# define R500_RGB_ADDR0(x) ((x) << 0)
# define R500_RGB_ADDR0_CONST (1 << 8)
# define R500_RGB_ADDR0_REL (1 << 9)
-# define R500_RGB_ADDR1(x) (x << 10)
+# define R500_RGB_ADDR1(x) ((x) << 10)
# define R500_RGB_ADDR1_CONST (1 << 18)
# define R500_RGB_ADDR1_REL (1 << 19)
-# define R500_RGB_ADDR2(x) (x << 20)
+# define R500_RGB_ADDR2(x) ((x) << 20)
# define R500_RGB_ADDR2_CONST (1 << 28)
# define R500_RGB_ADDR2_REL (1 << 29)
# define R500_RGB_SRCP_OP_1_MINUS_2RGB0 (0 << 30)
@@ -2998,19 +2998,19 @@ enum {
/* note that these are 8 bit lengths, despite the offsets, at least for R500 */
#define R500_US_CODE_ADDR 0x4630
-# define R500_US_CODE_START_ADDR(x) (x << 0)
-# define R500_US_CODE_END_ADDR(x) (x << 16)
+# define R500_US_CODE_START_ADDR(x) ((x) << 0)
+# define R500_US_CODE_END_ADDR(x) ((x) << 16)
#define R500_US_CODE_OFFSET 0x4638
-# define R500_US_CODE_OFFSET_ADDR(x) (x << 0)
+# define R500_US_CODE_OFFSET_ADDR(x) ((x) << 0)
#define R500_US_CODE_RANGE 0x4634
-# define R500_US_CODE_RANGE_ADDR(x) (x << 0)
-# define R500_US_CODE_RANGE_SIZE(x) (x << 16)
+# define R500_US_CODE_RANGE_ADDR(x) ((x) << 0)
+# define R500_US_CODE_RANGE_SIZE(x) ((x) << 16)
#define R500_US_CONFIG 0x4600
# define R500_ZERO_TIMES_ANYTHING_EQUALS_ZERO (1 << 1)
#define R500_US_FC_ADDR_0 0xa000
-# define R500_FC_BOOL_ADDR(x) (x << 0)
-# define R500_FC_INT_ADDR(x) (x << 8)
-# define R500_FC_JUMP_ADDR(x) (x << 16)
+# define R500_FC_BOOL_ADDR(x) ((x) << 0)
+# define R500_FC_INT_ADDR(x) ((x) << 8)
+# define R500_FC_JUMP_ADDR(x) ((x) << 16)
# define R500_FC_JUMP_GLOBAL (1 << 31)
#define R500_US_FC_BOOL_CONST 0x4620
# define R500_FC_KBOOL(x) (x)
@@ -3031,8 +3031,8 @@ enum {
# define R500_FC_A_OP_NONE (0 << 6)
# define R500_FC_A_OP_POP (1 << 6)
# define R500_FC_A_OP_PUSH (2 << 6)
-# define R500_FC_JUMP_FUNC(x) (x << 8)
-# define R500_FC_B_POP_CNT(x) (x << 16)
+# define R500_FC_JUMP_FUNC(x) ((x) << 8)
+# define R500_FC_B_POP_CNT(x) ((x) << 16)
# define R500_FC_B_OP0_NONE (0 << 24)
# define R500_FC_B_OP0_DECR (1 << 24)
# define R500_FC_B_OP0_INCR (2 << 24)
@@ -3041,18 +3041,18 @@ enum {
# define R500_FC_B_OP1_INCR (2 << 26)
# define R500_FC_IGNORE_UNCOVERED (1 << 28)
#define R500_US_FC_INT_CONST_0 0x4c00
-# define R500_FC_INT_CONST_KR(x) (x << 0)
-# define R500_FC_INT_CONST_KG(x) (x << 8)
-# define R500_FC_INT_CONST_KB(x) (x << 16)
+# define R500_FC_INT_CONST_KR(x) ((x) << 0)
+# define R500_FC_INT_CONST_KG(x) ((x) << 8)
+# define R500_FC_INT_CONST_KB(x) ((x) << 16)
/* _0 through _15 */
#define R500_US_FORMAT0_0 0x4640
-# define R500_FORMAT_TXWIDTH(x) (x << 0)
-# define R500_FORMAT_TXHEIGHT(x) (x << 11)
-# define R500_FORMAT_TXDEPTH(x) (x << 22)
+# define R500_FORMAT_TXWIDTH(x) ((x) << 0)
+# define R500_FORMAT_TXHEIGHT(x) ((x) << 11)
+# define R500_FORMAT_TXDEPTH(x) ((x) << 22)
#define R500_US_PIXSIZE 0x4604
# define R500_PIX_SIZE(x) (x)
#define R500_US_TEX_ADDR_0 0x9800
-# define R500_TEX_SRC_ADDR(x) (x << 0)
+# define R500_TEX_SRC_ADDR(x) ((x) << 0)
# define R500_TEX_SRC_ADDR_REL (1 << 7)
# define R500_TEX_SRC_S_SWIZ_R (0 << 8)
# define R500_TEX_SRC_S_SWIZ_G (1 << 8)
@@ -3070,7 +3070,7 @@ enum {
# define R500_TEX_SRC_Q_SWIZ_G (1 << 14)
# define R500_TEX_SRC_Q_SWIZ_B (2 << 14)
# define R500_TEX_SRC_Q_SWIZ_A (3 << 14)
-# define R500_TEX_DST_ADDR(x) (x << 16)
+# define R500_TEX_DST_ADDR(x) ((x) << 16)
# define R500_TEX_DST_ADDR_REL (1 << 23)
# define R500_TEX_DST_R_SWIZ_R (0 << 24)
# define R500_TEX_DST_R_SWIZ_G (1 << 24)
@@ -3089,7 +3089,7 @@ enum {
# define R500_TEX_DST_A_SWIZ_B (2 << 30)
# define R500_TEX_DST_A_SWIZ_A (3 << 30)
#define R500_US_TEX_ADDR_DXDY_0 0xa000
-# define R500_DX_ADDR(x) (x << 0)
+# define R500_DX_ADDR(x) ((x) << 0)
# define R500_DX_ADDR_REL (1 << 7)
# define R500_DX_S_SWIZ_R (0 << 8)
# define R500_DX_S_SWIZ_G (1 << 8)
@@ -3107,7 +3107,7 @@ enum {
# define R500_DX_Q_SWIZ_G (1 << 14)
# define R500_DX_Q_SWIZ_B (2 << 14)
# define R500_DX_Q_SWIZ_A (3 << 14)
-# define R500_DY_ADDR(x) (x << 16)
+# define R500_DY_ADDR(x) ((x) << 16)
# define R500_DY_ADDR_REL (1 << 17)
# define R500_DY_S_SWIZ_R (0 << 24)
# define R500_DY_S_SWIZ_G (1 << 24)
@@ -3126,7 +3126,7 @@ enum {
# define R500_DY_Q_SWIZ_B (2 << 30)
# define R500_DY_Q_SWIZ_A (3 << 30)
#define R500_US_TEX_INST_0 0x9000
-# define R500_TEX_ID(x) (x << 16)
+# define R500_TEX_ID(x) ((x) << 16)
# define R500_TEX_INST_NOP (0 << 22)
# define R500_TEX_INST_LD (1 << 22)
# define R500_TEX_INST_TEXKILL (2 << 22)
@@ -3187,9 +3187,9 @@ enum {
#define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00
#define R300_PACKET3_INDX_BUFFER 0x00003300
-# define R300_EB_UNK1_SHIFT 24
-# define R300_EB_UNK1 (0x80<<24)
-# define R300_EB_UNK2 0x0810
+# define R300_INDX_BUFFER_DST_SHIFT 0
+# define R300_INDX_BUFFER_SKIP_SHIFT 16
+# define R300_INDX_BUFFER_ONE_REG_WR (1<<31)
/* Same as R300_PACKET3_3D_DRAW_VBUF but without VAP_VTX_FMT */
#define R300_PACKET3_3D_DRAW_VBUF_2 0x00003400