anv: Port L3 cache programming from i965

Signed-off-by: Jordan Justen <[email protected]>
Acked-by: Jason Ekstrand <[email protected]>

9 files changed, 593 insertions, 173 deletions

diff --git a/src/intel/vulkan/Makefile.sources b/src/intel/vulkan/Makefile.sources
index 5d6a3033ed6..aa1459af5e4 100644
--- a/src/intel/vulkan/Makefile.sources
+++ b/src/intel/vulkan/Makefile.sources
@@ -71,6 +71,7 @@ VULKAN_GENERATED_FILES := \
 
 GEN7_FILES := \
 	genX_cmd_buffer.c \
+	genX_l3.c \
 	genX_pipeline.c \
 	gen7_cmd_buffer.c \
 	gen7_pipeline.c \
@@ -78,6 +79,7 @@ GEN7_FILES := \
 
 GEN75_FILES := \
 	genX_cmd_buffer.c \
+	genX_l3.c \
 	genX_pipeline.c \
 	gen7_cmd_buffer.c \
 	gen7_pipeline.c \
@@ -85,6 +87,7 @@ GEN75_FILES := \
 
 GEN8_FILES := \
 	genX_cmd_buffer.c \
+	genX_l3.c \
 	genX_pipeline.c \
 	gen8_cmd_buffer.c \
 	gen8_pipeline.c \
@@ -92,6 +95,7 @@ GEN8_FILES := \
 
 GEN9_FILES := \
 	genX_cmd_buffer.c \
+	genX_l3.c \
 	genX_pipeline.c \
 	gen8_cmd_buffer.c \
 	gen8_pipeline.c \
diff --git a/src/intel/vulkan/anv_genX.h b/src/intel/vulkan/anv_genX.h
index 908a9e0efa9..a5ec27da2bd 100644
--- a/src/intel/vulkan/anv_genX.h
+++ b/src/intel/vulkan/anv_genX.h
@@ -42,8 +42,10 @@ void genX(cmd_buffer_set_subpass)(struct anv_cmd_buffer *cmd_buffer,
 void genX(flush_pipeline_select_3d)(struct anv_cmd_buffer *cmd_buffer);
 void genX(flush_pipeline_select_gpgpu)(struct anv_cmd_buffer *cmd_buffer);
 
+void genX(setup_pipeline_l3_config)(struct anv_pipeline *pipeline);
+
 void genX(cmd_buffer_config_l3)(struct anv_cmd_buffer *cmd_buffer,
-                                bool enable_slm);
+                                const struct anv_pipeline *pipeline);
 
 void genX(cmd_buffer_flush_state)(struct anv_cmd_buffer *cmd_buffer);
 void genX(cmd_buffer_flush_dynamic_state)(struct anv_cmd_buffer *cmd_buffer);
diff --git a/src/intel/vulkan/anv_pipeline.c b/src/intel/vulkan/anv_pipeline.c
index a17a1bb04f4..faa0adbc971 100644
--- a/src/intel/vulkan/anv_pipeline.c
+++ b/src/intel/vulkan/anv_pipeline.c
@@ -777,10 +777,34 @@ anv_pipeline_compile_cs(struct anv_pipeline *pipeline,
    return VK_SUCCESS;
 }
 
-static void
-gen7_compute_urb_partition(struct anv_pipeline *pipeline)
+
+void
+anv_setup_pipeline_l3_config(struct anv_pipeline *pipeline)
+{
+   const struct brw_device_info *devinfo = &pipeline->device->info;
+   switch (devinfo->gen) {
+   case 7:
+      if (devinfo->is_haswell)
+         gen75_setup_pipeline_l3_config(pipeline);
+      else
+         gen7_setup_pipeline_l3_config(pipeline);
+      break;
+   case 8:
+      gen8_setup_pipeline_l3_config(pipeline);
+      break;
+   case 9:
+      gen9_setup_pipeline_l3_config(pipeline);
+      break;
+   default:
+      unreachable("unsupported gen\n");
+   }
+}
+
+void
+anv_compute_urb_partition(struct anv_pipeline *pipeline)
 {
    const struct brw_device_info *devinfo = &pipeline->device->info;
+
    bool vs_present = pipeline->active_stages & VK_SHADER_STAGE_VERTEX_BIT;
    unsigned vs_size = vs_present ?
       get_vs_prog_data(pipeline)->base.urb_entry_size : 1;
@@ -804,7 +828,7 @@ gen7_compute_urb_partition(struct anv_pipeline *pipeline)
    unsigned chunk_size_bytes = 8192;
 
    /* Determine the size of the URB in chunks. */
-   unsigned urb_chunks = devinfo->urb.size * 1024 / chunk_size_bytes;
+   unsigned urb_chunks = pipeline->urb.total_size * 1024 / chunk_size_bytes;
 
    /* Reserve space for push constants */
    unsigned push_constant_kb;
@@ -1172,7 +1196,8 @@ anv_pipeline_init(struct anv_pipeline *pipeline,
       assert(extra->disable_vs);
    }
 
-   gen7_compute_urb_partition(pipeline);
+   anv_setup_pipeline_l3_config(pipeline);
+   anv_compute_urb_partition(pipeline);
 
    const VkPipelineVertexInputStateCreateInfo *vi_info =
       pCreateInfo->pVertexInputState;
diff --git a/src/intel/vulkan/anv_private.h b/src/intel/vulkan/anv_private.h
index 8afd47ffb0d..33cbff9ff3a 100644
--- a/src/intel/vulkan/anv_private.h
+++ b/src/intel/vulkan/anv_private.h
@@ -52,6 +52,8 @@ typedef struct xcb_connection_t xcb_connection_t;
 typedef uint32_t xcb_visualid_t;
 typedef uint32_t xcb_window_t;
 
+struct anv_l3_config;
+
 #define VK_PROTOTYPES
 #include <vulkan/vulkan.h>
 #include <vulkan/vulkan_intel.h>
@@ -1158,7 +1160,7 @@ struct anv_attachment_state {
 struct anv_cmd_state {
    /* PIPELINE_SELECT.PipelineSelection */
    uint32_t                                     current_pipeline;
-   uint32_t                                     current_l3_config;
+   const struct anv_l3_config *                 current_l3_config;
    uint32_t                                     vb_dirty;
    anv_cmd_dirty_mask_t                         dirty;
    anv_cmd_dirty_mask_t                         compute_dirty;
@@ -1413,6 +1415,8 @@ struct anv_pipeline {
       uint32_t                                  start[MESA_SHADER_GEOMETRY + 1];
       uint32_t                                  size[MESA_SHADER_GEOMETRY + 1];
       uint32_t                                  entries[MESA_SHADER_GEOMETRY + 1];
+      const struct anv_l3_config *              l3_config;
+      uint32_t                                  total_size;
    } urb;
 
    VkShaderStageFlags                           active_stages;
@@ -1530,6 +1534,12 @@ anv_get_isl_format(const struct brw_device_info *devinfo, VkFormat vk_format,
    return anv_get_format(devinfo, vk_format, aspect, tiling).isl_format;
 }
 
+void
+anv_compute_urb_partition(struct anv_pipeline *pipeline);
+
+void
+anv_setup_pipeline_l3_config(struct anv_pipeline *pipeline);
+
 /**
  * Subsurface of an anv_image.
  */
diff --git a/src/intel/vulkan/gen7_cmd_buffer.c b/src/intel/vulkan/gen7_cmd_buffer.c
index 32bae027725..4c4f90249ce 100644
--- a/src/intel/vulkan/gen7_cmd_buffer.c
+++ b/src/intel/vulkan/gen7_cmd_buffer.c
@@ -284,97 +284,6 @@ flush_compute_descriptor_set(struct anv_cmd_buffer *cmd_buffer)
 }
 
 void
-genX(cmd_buffer_config_l3)(struct anv_cmd_buffer *cmd_buffer, bool enable_slm)
-{
-   /* References for GL state:
-    *
-    * - commits e307cfa..228d5a3
-    * - src/mesa/drivers/dri/i965/gen7_l3_state.c
-    */
-
-   uint32_t l3cr2_slm, l3cr2_noslm;
-   anv_pack_struct(&l3cr2_noslm, GENX(L3CNTLREG2),
-                   .URBAllocation = 24,
-                   .ROAllocation = 0,
-                   .DCAllocation = 16);
-   anv_pack_struct(&l3cr2_slm, GENX(L3CNTLREG2),
-                   .SLMEnable = 1,
-                   .URBAllocation = 16,
-                   .URBLowBandwidth = 1,
-                   .ROAllocation = 0,
-                   .DCAllocation = 8);
-   const uint32_t l3cr2_val = enable_slm ? l3cr2_slm : l3cr2_noslm;
-   bool changed = cmd_buffer->state.current_l3_config != l3cr2_val;
-
-   if (changed) {
-      /* According to the hardware docs, the L3 partitioning can only be
-       * changed while the pipeline is completely drained and the caches are
-       * flushed, which involves a first PIPE_CONTROL flush which stalls the
-       * pipeline...
-       */
-      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
-         pc.DCFlushEnable              = true;
-         pc.CommandStreamerStallEnable = true;
-         pc.PostSyncOperation          = NoWrite;
-      }
-
-      /* ...followed by a second pipelined PIPE_CONTROL that initiates
-       * invalidation of the relevant caches. Note that because RO
-       * invalidation happens at the top of the pipeline (i.e. right away as
-       * the PIPE_CONTROL command is processed by the CS) we cannot combine it
-       * with the previous stalling flush as the hardware documentation
-       * suggests, because that would cause the CS to stall on previous
-       * rendering *after* RO invalidation and wouldn't prevent the RO caches
-       * from being polluted by concurrent rendering before the stall
-       * completes. This intentionally doesn't implement the SKL+ hardware
-       * workaround suggesting to enable CS stall on PIPE_CONTROLs with the
-       * texture cache invalidation bit set for GPGPU workloads because the
-       * previous and subsequent PIPE_CONTROLs already guarantee that there is
-       * no concurrent GPGPU kernel execution (see SKL HSD 2132585).
-       */
-      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
-         pc.TextureCacheInvalidationEnable   = true;
-         pc.ConstantCacheInvalidationEnable  = true;
-         pc.InstructionCacheInvalidateEnable = true;
-         pc.StateCacheInvalidationEnable     = true;
-         pc.PostSyncOperation                = NoWrite;
-      }
-
-      /* Now send a third stalling flush to make sure that invalidation is
-       * complete when the L3 configuration registers are modified.
-       */
-      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
-         pc.DCFlushEnable              = true;
-         pc.CommandStreamerStallEnable = true;
-         pc.PostSyncOperation          = NoWrite;
-      }
-
-      anv_finishme("write GEN7_L3SQCREG1");
-      anv_batch_emit(&cmd_buffer->batch, GENX(MI_LOAD_REGISTER_IMM), lri) {
-         lri.RegisterOffset   = GENX(L3CNTLREG2_num);
-         lri.DataDWord        = l3cr2_val;
-      }
-
-      uint32_t l3cr3_slm, l3cr3_noslm;
-      anv_pack_struct(&l3cr3_noslm, GENX(L3CNTLREG3),
-                      .ISAllocation = 8,
-                      .CAllocation = 4,
-                      .TAllocation = 8);
-      anv_pack_struct(&l3cr3_slm, GENX(L3CNTLREG3),
-                      .ISAllocation = 8,
-                      .CAllocation = 8,
-                      .TAllocation = 8);
-      const uint32_t l3cr3_val = enable_slm ? l3cr3_slm : l3cr3_noslm;
-      anv_batch_emit(&cmd_buffer->batch, GENX(MI_LOAD_REGISTER_IMM), lri) {
-         lri.RegisterOffset   = GENX(L3CNTLREG3_num);
-         lri.DataDWord        = l3cr3_val;
-      }
-
-      cmd_buffer->state.current_l3_config = l3cr2_val;
-   }
-}
-
-void
 genX(cmd_buffer_flush_compute_state)(struct anv_cmd_buffer *cmd_buffer)
 {
    struct anv_pipeline *pipeline = cmd_buffer->state.compute_pipeline;
@@ -383,8 +292,7 @@ genX(cmd_buffer_flush_compute_state)(struct anv_cmd_buffer *cmd_buffer)
 
    assert(pipeline->active_stages == VK_SHADER_STAGE_COMPUTE_BIT);
 
-   bool needs_slm = cs_prog_data->base.total_shared > 0;
-   genX(cmd_buffer_config_l3)(cmd_buffer, needs_slm);
+   genX(cmd_buffer_config_l3)(cmd_buffer, pipeline);
 
    genX(flush_pipeline_select_gpgpu)(cmd_buffer);
 
diff --git a/src/intel/vulkan/gen8_cmd_buffer.c b/src/intel/vulkan/gen8_cmd_buffer.c
index d078dac8ca3..693d2a603ff 100644
--- a/src/intel/vulkan/gen8_cmd_buffer.c
+++ b/src/intel/vulkan/gen8_cmd_buffer.c
@@ -91,77 +91,6 @@ gen8_cmd_buffer_emit_viewport(struct anv_cmd_buffer *cmd_buffer)
 }
 #endif
 
-void
-genX(cmd_buffer_config_l3)(struct anv_cmd_buffer *cmd_buffer, bool enable_slm)
-{
-   /* References for GL state:
-    *
-    * - commits e307cfa..228d5a3
-    * - src/mesa/drivers/dri/i965/gen7_l3_state.c
-    */
-
-   uint32_t l3cr_slm, l3cr_noslm;
-   anv_pack_struct(&l3cr_noslm, GENX(L3CNTLREG),
-                   .URBAllocation = 48,
-                   .AllAllocation = 48);
-   anv_pack_struct(&l3cr_slm, GENX(L3CNTLREG),
-                   .SLMEnable = 1,
-                   .URBAllocation = 16,
-                   .AllAllocation = 48);
-   const uint32_t l3cr_val = enable_slm ? l3cr_slm : l3cr_noslm;
-   bool changed = cmd_buffer->state.current_l3_config != l3cr_val;
-
-   if (changed) {
-      /* According to the hardware docs, the L3 partitioning can only be
-       * changed while the pipeline is completely drained and the caches are
-       * flushed, which involves a first PIPE_CONTROL flush which stalls the
-       * pipeline...
-       */
-      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
-         pc.DCFlushEnable              = true;
-         pc.PostSyncOperation          = NoWrite;
-         pc.CommandStreamerStallEnable = true;
-      }
-
-      /* ...followed by a second pipelined PIPE_CONTROL that initiates
-       * invalidation of the relevant caches. Note that because RO
-       * invalidation happens at the top of the pipeline (i.e. right away as
-       * the PIPE_CONTROL command is processed by the CS) we cannot combine it
-       * with the previous stalling flush as the hardware documentation
-       * suggests, because that would cause the CS to stall on previous
-       * rendering *after* RO invalidation and wouldn't prevent the RO caches
-       * from being polluted by concurrent rendering before the stall
-       * completes. This intentionally doesn't implement the SKL+ hardware
-       * workaround suggesting to enable CS stall on PIPE_CONTROLs with the
-       * texture cache invalidation bit set for GPGPU workloads because the
-       * previous and subsequent PIPE_CONTROLs already guarantee that there is
-       * no concurrent GPGPU kernel execution (see SKL HSD 2132585).
-       */
-      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
-         pc.TextureCacheInvalidationEnable   = true,
-         pc.ConstantCacheInvalidationEnable  = true,
-         pc.InstructionCacheInvalidateEnable = true,
-         pc.StateCacheInvalidationEnable     = true,
-         pc.PostSyncOperation                = NoWrite;
-      }
-
-      /* Now send a third stalling flush to make sure that invalidation is
-       * complete when the L3 configuration registers are modified.
-       */
-      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
-         pc.DCFlushEnable              = true;
-         pc.PostSyncOperation          = NoWrite;
-         pc.CommandStreamerStallEnable = true;
-      }
-
-      anv_batch_emit(&cmd_buffer->batch, GENX(MI_LOAD_REGISTER_IMM), lri) {
-         lri.RegisterOffset   = GENX(L3CNTLREG_num);
-         lri.DataDWord        = l3cr_val;
-      }
-      cmd_buffer->state.current_l3_config = l3cr_val;
-   }
-}
-
 static void
 __emit_genx_sf_state(struct anv_cmd_buffer *cmd_buffer)
 {
@@ -448,8 +377,7 @@ genX(cmd_buffer_flush_compute_state)(struct anv_cmd_buffer *cmd_buffer)
 
    assert(pipeline->active_stages == VK_SHADER_STAGE_COMPUTE_BIT);
 
-   bool needs_slm = cs_prog_data->base.total_shared > 0;
-   genX(cmd_buffer_config_l3)(cmd_buffer, needs_slm);
+   genX(cmd_buffer_config_l3)(cmd_buffer, pipeline);
 
    genX(flush_pipeline_select_gpgpu)(cmd_buffer);
 
diff --git a/src/intel/vulkan/genX_cmd_buffer.c b/src/intel/vulkan/genX_cmd_buffer.c
index a7e20da32cb..4c9b39299e3 100644
--- a/src/intel/vulkan/genX_cmd_buffer.c
+++ b/src/intel/vulkan/genX_cmd_buffer.c
@@ -340,7 +340,7 @@ genX(cmd_buffer_flush_state)(struct anv_cmd_buffer *cmd_buffer)
     * but at least 3-D will.  In the mean time, I'm going to make this
     * gen8+ only so that we can get Haswell working again.
     */
-   genX(cmd_buffer_config_l3)(cmd_buffer, false);
+   genX(cmd_buffer_config_l3)(cmd_buffer, pipeline);
 #endif
 
    genX(flush_pipeline_select_3d)(cmd_buffer);
diff --git a/src/intel/vulkan/genX_l3.c b/src/intel/vulkan/genX_l3.c
new file mode 100644
index 00000000000..0d36e3cd4c0
--- /dev/null
+++ b/src/intel/vulkan/genX_l3.c
@@ -0,0 +1,541 @@
+/*
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include "anv_private.h"
+
+#include "genxml/gen_macros.h"
+#include "genxml/genX_pack.h"
+
+/**
+ * Chunk of L3 cache reserved for some specific purpose.
+ */
+enum anv_l3_partition {
+   /** Shared local memory. */
+   L3P_SLM = 0,
+   /** Unified return buffer. */
+   L3P_URB,
+   /** Union of DC and RO. */
+   L3P_ALL,
+   /** Data cluster RW partition. */
+   L3P_DC,
+   /** Union of IS, C and T. */
+   L3P_RO,
+   /** Instruction and state cache. */
+   L3P_IS,
+   /** Constant cache. */
+   L3P_C,
+   /** Texture cache. */
+   L3P_T,
+   /** Number of supported L3 partitions. */
+   NUM_L3P
+};
+
+/**
+ * L3 configuration represented as the number of ways allocated for each
+ * partition.  \sa get_l3_way_size().
+ */
+struct anv_l3_config {
+   unsigned n[NUM_L3P];
+};
+
+#if GEN_GEN == 7
+
+/**
+ * IVB/HSW validated L3 configurations.  The first entry will be used as
+ * default by gen7_restore_default_l3_config(), otherwise the ordering is
+ * unimportant.
+ */
+static const struct anv_l3_config ivb_l3_configs[] = {
+   /* SLM URB ALL DC  RO  IS   C   T */
+   {{  0, 32,  0,  0, 32,  0,  0,  0 }},
+   {{  0, 32,  0, 16, 16,  0,  0,  0 }},
+   {{  0, 32,  0,  4,  0,  8,  4, 16 }},
+   {{  0, 28,  0,  8,  0,  8,  4, 16 }},
+   {{  0, 28,  0, 16,  0,  8,  4,  8 }},
+   {{  0, 28,  0,  8,  0, 16,  4,  8 }},
+   {{  0, 28,  0,  0,  0, 16,  4, 16 }},
+   {{  0, 32,  0,  0,  0, 16,  0, 16 }},
+   {{  0, 28,  0,  4, 32,  0,  0,  0 }},
+   {{ 16, 16,  0, 16, 16,  0,  0,  0 }},
+   {{ 16, 16,  0,  8,  0,  8,  8,  8 }},
+   {{ 16, 16,  0,  4,  0,  8,  4, 16 }},
+   {{ 16, 16,  0,  4,  0, 16,  4,  8 }},
+   {{ 16, 16,  0,  0, 32,  0,  0,  0 }},
+   {{ 0 }}
+};
+
+#endif
+
+#if GEN_GEN == 7 && !GEN_IS_HASWELL
+
+/**
+ * VLV validated L3 configurations.  \sa ivb_l3_configs.
+ */
+static const struct anv_l3_config vlv_l3_configs[] = {
+   /* SLM URB ALL DC  RO  IS   C   T */
+   {{  0, 64,  0,  0, 32,  0,  0,  0 }},
+   {{  0, 80,  0,  0, 16,  0,  0,  0 }},
+   {{  0, 80,  0,  8,  8,  0,  0,  0 }},
+   {{  0, 64,  0, 16, 16,  0,  0,  0 }},
+   {{  0, 60,  0,  4, 32,  0,  0,  0 }},
+   {{ 32, 32,  0, 16, 16,  0,  0,  0 }},
+   {{ 32, 40,  0,  8, 16,  0,  0,  0 }},
+   {{ 32, 40,  0, 16,  8,  0,  0,  0 }},
+   {{ 0 }}
+};
+
+#endif
+
+#if GEN_GEN == 8
+
+/**
+ * BDW validated L3 configurations.  \sa ivb_l3_configs.
+ */
+static const struct anv_l3_config bdw_l3_configs[] = {
+   /* SLM URB ALL DC  RO  IS   C   T */
+   {{  0, 48, 48,  0,  0,  0,  0,  0 }},
+   {{  0, 48,  0, 16, 32,  0,  0,  0 }},
+   {{  0, 32,  0, 16, 48,  0,  0,  0 }},
+   {{  0, 32,  0,  0, 64,  0,  0,  0 }},
+   {{  0, 32, 64,  0,  0,  0,  0,  0 }},
+   {{ 24, 16, 48,  0,  0,  0,  0,  0 }},
+   {{ 24, 16,  0, 16, 32,  0,  0,  0 }},
+   {{ 24, 16,  0, 32, 16,  0,  0,  0 }},
+   {{ 0 }}
+};
+
+#endif
+
+#if GEN_GEN == 8 || GEN_GEN == 9
+
+/**
+ * CHV/SKL validated L3 configurations.  \sa ivb_l3_configs.
+ */
+static const struct anv_l3_config chv_l3_configs[] = {
+   /* SLM URB ALL DC  RO  IS   C   T */
+   {{  0, 48, 48,  0,  0,  0,  0,  0 }},
+   {{  0, 48,  0, 16, 32,  0,  0,  0 }},
+   {{  0, 32,  0, 16, 48,  0,  0,  0 }},
+   {{  0, 32,  0,  0, 64,  0,  0,  0 }},
+   {{  0, 32, 64,  0,  0,  0,  0,  0 }},
+   {{ 32, 16, 48,  0,  0,  0,  0,  0 }},
+   {{ 32, 16,  0, 16, 32,  0,  0,  0 }},
+   {{ 32, 16,  0, 32, 16,  0,  0,  0 }},
+   {{ 0 }}
+};
+
+#endif
+
+/**
+ * Return a zero-terminated array of validated L3 configurations for the
+ * specified device.
+ */
+static inline const struct anv_l3_config *
+get_l3_configs(const struct brw_device_info *devinfo)
+{
+   assert(devinfo->gen == GEN_GEN);
+#if GEN_IS_HASWELL
+   return ivb_l3_configs;
+#elif GEN_GEN == 7
+   return (devinfo->is_baytrail ? vlv_l3_configs : ivb_l3_configs);
+#elif GEN_GEN == 8
+   return (devinfo->is_cherryview ? chv_l3_configs : bdw_l3_configs);
+#elif GEN_GEN == 9
+   return chv_l3_configs;
+#else
+#error GEN not supported
+#endif
+}
+
+/**
+ * Return the size of an L3 way in KB.
+ */
+static unsigned
+get_l3_way_size(const struct brw_device_info *devinfo)
+{
+   if (devinfo->is_baytrail)
+      return 2;
+
+   else if (devinfo->is_cherryview || devinfo->gt == 1)
+      return 4;
+
+   else
+      return 8 * devinfo->num_slices;
+}
+
+/**
+ * L3 configuration represented as a vector of weights giving the desired
+ * relative size of each partition.  The scale is arbitrary, only the ratios
+ * between weights will have an influence on the selection of the closest L3
+ * configuration.
+ */
+struct anv_l3_weights {
+   float w[NUM_L3P];
+};
+
+/**
+ * L1-normalize a vector of L3 partition weights.
+ */
+static struct anv_l3_weights
+norm_l3_weights(struct anv_l3_weights w)
+{
+   float sz = 0;
+
+   for (unsigned i = 0; i < NUM_L3P; i++)
+      sz += w.w[i];
+
+   for (unsigned i = 0; i < NUM_L3P; i++)
+      w.w[i] /= sz;
+
+   return w;
+}
+
+/**
+ * Get the relative partition weights of the specified L3 configuration.
+ */
+static struct anv_l3_weights
+get_config_l3_weights(const struct anv_l3_config *cfg)
+{
+   if (cfg) {
+      struct anv_l3_weights w;
+
+      for (unsigned i = 0; i < NUM_L3P; i++)
+         w.w[i] = cfg->n[i];
+
+      return norm_l3_weights(w);
+   } else {
+      const struct anv_l3_weights w = { { 0 } };
+      return w;
+   }
+}
+
+/**
+ * Distance between two L3 configurations represented as vectors of weights.
+ * Usually just the L1 metric except when the two configurations are
+ * considered incompatible in which case the distance will be infinite.  Note
+ * that the compatibility condition is asymmetric -- They will be considered
+ * incompatible whenever the reference configuration \p w0 requires SLM, DC,
+ * or URB but \p w1 doesn't provide it.
+ */
+static float
+diff_l3_weights(struct anv_l3_weights w0, struct anv_l3_weights w1)
+{
+   if ((w0.w[L3P_SLM] && !w1.w[L3P_SLM]) ||
+       (w0.w[L3P_DC] && !w1.w[L3P_DC] && !w1.w[L3P_ALL]) ||
+       (w0.w[L3P_URB] && !w1.w[L3P_URB])) {
+      return HUGE_VALF;
+
+   } else {
+      float dw = 0;
+
+      for (unsigned i = 0; i < NUM_L3P; i++)
+         dw += fabs(w0.w[i] - w1.w[i]);
+
+      return dw;
+   }
+}
+
+/**
+ * Return the closest validated L3 configuration for the specified device and
+ * weight vector.
+ */
+static const struct anv_l3_config *
+get_l3_config(const struct brw_device_info *devinfo, struct anv_l3_weights w0)
+{
+   const struct anv_l3_config *const cfgs = get_l3_configs(devinfo);
+   const struct anv_l3_config *cfg_best = NULL;
+   float dw_best = HUGE_VALF;
+
+   for (const struct anv_l3_config *cfg = cfgs; cfg->n[L3P_URB]; cfg++) {
+      const float dw = diff_l3_weights(w0, get_config_l3_weights(cfg));
+
+      if (dw < dw_best) {
+         cfg_best = cfg;
+         dw_best = dw;
+      }
+   }
+
+   return cfg_best;
+}
+
+/**
+ * Return a reasonable default L3 configuration for the specified device based
+ * on whether SLM and DC are required.  In the non-SLM non-DC case the result
+ * is intended to approximately resemble the hardware defaults.
+ */
+static struct anv_l3_weights
+get_default_l3_weights(const struct brw_device_info *devinfo,
+                       bool needs_dc, bool needs_slm)
+{
+   struct anv_l3_weights w = {{ 0 }};
+
+   w.w[L3P_SLM] = needs_slm;
+   w.w[L3P_URB] = 1.0;
+
+   if (devinfo->gen >= 8) {
+      w.w[L3P_ALL] = 1.0;
+   } else {
+      w.w[L3P_DC] = needs_dc ? 0.1 : 0;
+      w.w[L3P_RO] = devinfo->is_baytrail ? 0.5 : 1.0;
+   }
+
+   return norm_l3_weights(w);
+}
+
+/**
+ * Calculate the desired L3 partitioning based on the current state of the
+ * pipeline.  For now this simply returns the conservative defaults calculated
+ * by get_default_l3_weights(), but we could probably do better by gathering
+ * more statistics from the pipeline state (e.g. guess of expected URB usage
+ * and bound surfaces), or by using feed-back from performance counters.
+ */
+static struct anv_l3_weights
+get_pipeline_state_l3_weights(const struct anv_pipeline *pipeline)
+{
+   bool needs_dc = false, needs_slm = false;
+
+   for (unsigned i = 0; i < MESA_SHADER_STAGES; i++) {
+      const struct brw_stage_prog_data *prog_data = pipeline->prog_data[i];
+
+      needs_dc |= pipeline->needs_data_cache;
+      needs_slm |= prog_data && prog_data->total_shared;
+   }
+
+   return get_default_l3_weights(&pipeline->device->info,
+                                 needs_dc, needs_slm);
+}
+
+#define emit_lri(batch, reg, imm)                               \
+   anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_IMM), lri) {     \
+      lri.RegisterOffset = __anv_reg_num(reg);                  \
+      lri.DataDWord = imm;                                      \
+   }
+
+#define IVB_L3SQCREG1_SQGHPCI_DEFAULT     0x00730000
+#define VLV_L3SQCREG1_SQGHPCI_DEFAULT     0x00d30000
+#define HSW_L3SQCREG1_SQGHPCI_DEFAULT     0x00610000
+
+/**
+ * Program the hardware to use the specified L3 configuration.
+ */
+static void
+setup_l3_config(struct anv_cmd_buffer *cmd_buffer/*, struct brw_context *brw*/,
+                const struct anv_l3_config *cfg)
+{
+   const bool has_slm = cfg->n[L3P_SLM];
+
+   /* According to the hardware docs, the L3 partitioning can only be changed
+    * while the pipeline is completely drained and the caches are flushed,
+    * which involves a first PIPE_CONTROL flush which stalls the pipeline...
+    */
+   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
+      pc.DCFlushEnable = true;
+      pc.PostSyncOperation = NoWrite;
+      pc.CommandStreamerStallEnable = true;
+   }
+
+   /* ...followed by a second pipelined PIPE_CONTROL that initiates
+    * invalidation of the relevant caches.  Note that because RO invalidation
+    * happens at the top of the pipeline (i.e. right away as the PIPE_CONTROL
+    * command is processed by the CS) we cannot combine it with the previous
+    * stalling flush as the hardware documentation suggests, because that
+    * would cause the CS to stall on previous rendering *after* RO
+    * invalidation and wouldn't prevent the RO caches from being polluted by
+    * concurrent rendering before the stall completes.  This intentionally
+    * doesn't implement the SKL+ hardware workaround suggesting to enable CS
+    * stall on PIPE_CONTROLs with the texture cache invalidation bit set for
+    * GPGPU workloads because the previous and subsequent PIPE_CONTROLs
+    * already guarantee that there is no concurrent GPGPU kernel execution
+    * (see SKL HSD 2132585).
+    */
+   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
+      pc.TextureCacheInvalidationEnable = true;
+      pc.ConstantCacheInvalidationEnable = true;
+      pc.InstructionCacheInvalidateEnable = true;
+      pc.StateCacheInvalidationEnable = true;
+      pc.PostSyncOperation = NoWrite;
+   }
+
+   /* Now send a third stalling flush to make sure that invalidation is
+    * complete when the L3 configuration registers are modified.
+    */
+   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
+      pc.DCFlushEnable = true;
+      pc.PostSyncOperation = NoWrite;
+      pc.CommandStreamerStallEnable = true;
+   }
+
+#if GEN_GEN >= 8
+
+   assert(!cfg->n[L3P_IS] && !cfg->n[L3P_C] && !cfg->n[L3P_T]);
+
+   uint32_t l3cr;
+   anv_pack_struct(&l3cr, GENX(L3CNTLREG),
+                   .SLMEnable = has_slm,
+                   .URBAllocation = cfg->n[L3P_URB],
+                   .ROAllocation = cfg->n[L3P_RO],
+                   .DCAllocation = cfg->n[L3P_DC],
+                   .AllAllocation = cfg->n[L3P_ALL]);
+
+   /* Set up the L3 partitioning. */
+   emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG), l3cr);
+
+#else
+
+   const bool has_dc = cfg->n[L3P_DC] || cfg->n[L3P_ALL];
+   const bool has_is = cfg->n[L3P_IS] || cfg->n[L3P_RO] || cfg->n[L3P_ALL];
+   const bool has_c = cfg->n[L3P_C] || cfg->n[L3P_RO] || cfg->n[L3P_ALL];
+   const bool has_t = cfg->n[L3P_T] || cfg->n[L3P_RO] || cfg->n[L3P_ALL];
+
+   assert(!cfg->n[L3P_ALL]);
+
+   /* When enabled SLM only uses a portion of the L3 on half of the banks,
+    * the matching space on the remaining banks has to be allocated to a
+    * client (URB for all validated configurations) set to the
+    * lower-bandwidth 2-bank address hashing mode.
+    */
+   const struct brw_device_info *devinfo = &cmd_buffer->device->info;
+   const bool urb_low_bw = has_slm && !devinfo->is_baytrail;
+   assert(!urb_low_bw || cfg->n[L3P_URB] == cfg->n[L3P_SLM]);
+
+   /* Minimum number of ways that can be allocated to the URB. */
+   const unsigned n0_urb = (devinfo->is_baytrail ? 32 : 0);
+   assert(cfg->n[L3P_URB] >= n0_urb);
+
+   uint32_t l3sqcr1, l3cr2, l3cr3;
+   anv_pack_struct(&l3sqcr1, GENX(L3SQCREG1),
+                   .ConvertDC_UC = !has_dc,
+                   .ConvertIS_UC = !has_is,
+                   .ConvertC_UC = !has_c,
+                   .ConvertT_UC = !has_t);
+   l3sqcr1 |=
+      GEN_IS_HASWELL ? HSW_L3SQCREG1_SQGHPCI_DEFAULT :
+      devinfo->is_baytrail ? VLV_L3SQCREG1_SQGHPCI_DEFAULT :
+      IVB_L3SQCREG1_SQGHPCI_DEFAULT;
+
+   anv_pack_struct(&l3cr2, GENX(L3CNTLREG2),
+                   .SLMEnable = has_slm,
+                   .URBLowBandwidth = urb_low_bw,
+                   .URBAllocation = cfg->n[L3P_URB],
+#if !GEN_IS_HASWELL
+                   .ALLAllocation = cfg->n[L3P_ALL],
+#endif
+                   .ROAllocation = cfg->n[L3P_RO],
+                   .DCAllocation = cfg->n[L3P_DC]);
+
+   anv_pack_struct(&l3cr3, GENX(L3CNTLREG3),
+                   .ISAllocation = cfg->n[L3P_IS],
+                   .ISLowBandwidth = 0,
+                   .CAllocation = cfg->n[L3P_C],
+                   .CLowBandwidth = 0,
+                   .TAllocation = cfg->n[L3P_T],
+                   .TLowBandwidth = 0);
+
+   /* Set up the L3 partitioning. */
+   emit_lri(&cmd_buffer->batch, GENX(L3SQCREG1), l3sqcr1);
+   emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG2), l3cr2);
+   emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG3), l3cr3);
+
+#if GEN_IS_HASWELL
+   if (cmd_buffer->device->instance->physicalDevice.cmd_parser_version >= 4) {
+      /* Enable L3 atomics on HSW if we have a DC partition, otherwise keep
+       * them disabled to avoid crashing the system hard.
+       */
+      uint32_t scratch1, chicken3;
+      anv_pack_struct(&scratch1, GENX(SCRATCH1),
+                      .L3AtomicDisable = !has_dc);
+      anv_pack_struct(&chicken3, GENX(CHICKEN3),
+                      .L3AtomicDisable = !has_dc);
+      emit_lri(&cmd_buffer->batch, GENX(SCRATCH1), scratch1);
+      emit_lri(&cmd_buffer->batch, GENX(CHICKEN3), chicken3);
+   }
+#endif
+
+#endif
+
+}
+
+/**
+ * Return the unit brw_context::urb::size is expressed in, in KB.  \sa
+ * brw_device_info::urb::size.
+ */
+static unsigned
+get_urb_size_scale(const struct brw_device_info *devinfo)
+{
+   return (devinfo->gen >= 8 ? devinfo->num_slices : 1);
+}
+
+void
+genX(setup_pipeline_l3_config)(struct anv_pipeline *pipeline)
+{
+   const struct anv_l3_weights w = get_pipeline_state_l3_weights(pipeline);
+   const struct brw_device_info *devinfo = &pipeline->device->info;
+   const struct anv_l3_config *const cfg = get_l3_config(devinfo, w);
+   pipeline->urb.l3_config = cfg;
+
+   unsigned sz = cfg->n[L3P_URB] * get_l3_way_size(devinfo);
+
+#if GEN_GEN == 9
+   /* From the SKL "L3 Allocation and Programming" documentation:
+    *
+    * "URB is limited to 1008KB due to programming restrictions.  This is not
+    * a restriction of the L3 implementation, but of the FF and other clients.
+    * Therefore, in a GT4 implementation it is possible for the programmed
+    * allocation of the L3 data array to provide 3*384KB=1152KB for URB, but
+    * only 1008KB of this will be used."
+    */
+   sz = MIN2(1008, sz);
+#endif
+
+   pipeline->urb.total_size = sz / get_urb_size_scale(devinfo);
+}
+
+/**
+ * Print out the specified L3 configuration.
+ */
+static void
+dump_l3_config(const struct anv_l3_config *cfg)
+{
+   fprintf(stderr, "SLM=%d URB=%d ALL=%d DC=%d RO=%d IS=%d C=%d T=%d\n",
+           cfg->n[L3P_SLM], cfg->n[L3P_URB], cfg->n[L3P_ALL],
+           cfg->n[L3P_DC], cfg->n[L3P_RO],
+           cfg->n[L3P_IS], cfg->n[L3P_C], cfg->n[L3P_T]);
+}
+
+void
+genX(cmd_buffer_config_l3)(struct anv_cmd_buffer *cmd_buffer,
+                           const struct anv_pipeline *pipeline)
+{
+   struct anv_cmd_state *state = &cmd_buffer->state;
+   const struct anv_l3_config *const cfg = pipeline->urb.l3_config;
+   assert(cfg);
+   if (cfg != state->current_l3_config) {
+      setup_l3_config(cmd_buffer, cfg);
+      state->current_l3_config = cfg;
+
+      if (unlikely(INTEL_DEBUG & DEBUG_L3)) {
+         fprintf(stderr, "L3 config transition: ");
+         dump_l3_config(cfg);
+      }
+   }
+}
diff --git a/src/intel/vulkan/genX_pipeline.c b/src/intel/vulkan/genX_pipeline.c
index 2a41b2d91fa..918a9a4f03b 100644
--- a/src/intel/vulkan/genX_pipeline.c
+++ b/src/intel/vulkan/genX_pipeline.c
@@ -84,6 +84,8 @@ genX(compute_pipeline_create)(
 
    pipeline->use_repclear = false;
 
+   anv_setup_pipeline_l3_config(pipeline);
+
    const struct brw_cs_prog_data *cs_prog_data = get_cs_prog_data(pipeline);
    const struct brw_stage_prog_data *prog_data = &cs_prog_data->base;