remove usage of vertex_header

1 files changed, 1249 insertions, 0 deletions

diff --git a/src/gallium/drivers/softpipe/sp_setup.c b/src/gallium/drivers/softpipe/sp_setup.c
new file mode 100644
index 00000000000..48617a66ed2
--- /dev/null
+++ b/src/gallium/drivers/softpipe/sp_setup.c
@@ -0,0 +1,1249 @@
+/**************************************************************************
+ *
+ * Copyright 2007 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+/**
+ * \brief  Primitive rasterization/rendering (points, lines, triangles)
+ *
+ * \author  Keith Whitwell <[email protected]>
+ * \author  Brian Paul
+ */
+
+#include "sp_setup.h"
+
+#include "sp_context.h"
+#include "sp_headers.h"
+#include "sp_quad.h"
+#include "sp_state.h"
+#include "sp_prim_setup.h"
+#include "draw/draw_private.h"
+#include "draw/draw_vertex.h"
+#include "pipe/p_util.h"
+#include "pipe/p_shader_tokens.h"
+
+#define DEBUG_VERTS 0
+#define DEBUG_FRAGS 0
+
+/**
+ * Triangle edge info
+ */
+struct edge {
+   float dx;		/**< X(v1) - X(v0), used only during setup */
+   float dy;		/**< Y(v1) - Y(v0), used only during setup */
+   float dxdy;		/**< dx/dy */
+   float sx, sy;	/**< first sample point coord */
+   int lines;		/**< number of lines on this edge */
+};
+
+
+/**
+ * Triangle setup info (derived from draw_stage).
+ * Also used for line drawing (taking some liberties).
+ */
+struct setup_context {
+   struct softpipe_context *softpipe;
+
+   /* Vertices are just an array of floats making up each attribute in
+    * turn.  Currently fixed at 4 floats, but should change in time.
+    * Codegen will help cope with this.
+    */
+   const float (*vmax)[4];
+   const float (*vmid)[4];
+   const float (*vmin)[4];
+   const float (*vprovoke)[4];
+
+   struct edge ebot;
+   struct edge etop;
+   struct edge emaj;
+
+   float oneoverarea;
+
+   struct tgsi_interp_coef coef[PIPE_MAX_SHADER_INPUTS];
+   struct tgsi_interp_coef posCoef;  /* For Z, W */
+   struct quad_header quad;
+
+   struct {
+      int left[2];   /**< [0] = row0, [1] = row1 */
+      int right[2];
+      int y;
+      unsigned y_flags;
+      unsigned mask;     /**< mask of MASK_BOTTOM/TOP_LEFT/RIGHT bits */
+   } span;
+
+#if DEBUG_FRAGS
+   uint numFragsEmitted;  /**< per primitive */
+   uint numFragsWritten;  /**< per primitive */
+#endif
+};
+
+
+
+
+
+/**
+ * Recalculate prim's determinant.
+ * XXX is this needed?
+ */
+static INLINE float
+calc_det( const float (*v0)[4],
+          const float (*v1)[4],
+          const float (*v2)[4] )
+{
+   /* edge vectors e = v0 - v2, f = v1 - v2 */
+   const float ex = v0[0][0] - v2[0][0];
+   const float ey = v0[0][1] - v2[0][1];
+   const float fx = v1[0][0] - v2[0][0];
+   const float fy = v1[0][1] - v2[0][1];
+
+   /* det = cross(e,f).z */
+   return ex * fy - ey * fx;
+}
+
+/**
+ * Clip setup->quad against the scissor/surface bounds.
+ */
+static INLINE void
+quad_clip(struct setup_context *setup)
+{
+   const struct pipe_scissor_state *cliprect = &setup->softpipe->cliprect;
+   const int minx = (int) cliprect->minx;
+   const int maxx = (int) cliprect->maxx;
+   const int miny = (int) cliprect->miny;
+   const int maxy = (int) cliprect->maxy;
+
+   if (setup->quad.x0 >= maxx ||
+       setup->quad.y0 >= maxy ||
+       setup->quad.x0 + 1 < minx ||
+       setup->quad.y0 + 1 < miny) {
+      /* totally clipped */
+      setup->quad.mask = 0x0;
+      return;
+   }
+   if (setup->quad.x0 < minx)
+      setup->quad.mask &= (MASK_BOTTOM_RIGHT | MASK_TOP_RIGHT);
+   if (setup->quad.y0 < miny)
+      setup->quad.mask &= (MASK_BOTTOM_LEFT | MASK_BOTTOM_RIGHT);
+   if (setup->quad.x0 == maxx - 1)
+      setup->quad.mask &= (MASK_BOTTOM_LEFT | MASK_TOP_LEFT);
+   if (setup->quad.y0 == maxy - 1)
+      setup->quad.mask &= (MASK_TOP_LEFT | MASK_TOP_RIGHT);
+}
+
+
+/**
+ * Emit a quad (pass to next stage) with clipping.
+ */
+static INLINE void
+clip_emit_quad(struct setup_context *setup)
+{
+   quad_clip(setup);
+   if (setup->quad.mask) {
+      struct softpipe_context *sp = setup->softpipe;
+      sp->quad.first->run(sp->quad.first, &setup->quad);
+   }
+}
+
+
+/**
+ * Emit a quad (pass to next stage).  No clipping is done.
+ */
+static INLINE void
+emit_quad( struct setup_context *setup, int x, int y, unsigned mask )
+{
+   struct softpipe_context *sp = setup->softpipe;
+   setup->quad.x0 = x;
+   setup->quad.y0 = y;
+   setup->quad.mask = mask;
+#if DEBUG_FRAGS
+   if (mask & 1) setup->numFragsEmitted++;
+   if (mask & 2) setup->numFragsEmitted++;
+   if (mask & 4) setup->numFragsEmitted++;
+   if (mask & 8) setup->numFragsEmitted++;
+#endif
+   sp->quad.first->run(sp->quad.first, &setup->quad);
+#if DEBUG_FRAGS
+   mask = setup->quad.mask;
+   if (mask & 1) setup->numFragsWritten++;
+   if (mask & 2) setup->numFragsWritten++;
+   if (mask & 4) setup->numFragsWritten++;
+   if (mask & 8) setup->numFragsWritten++;
+#endif
+}
+
+
+/**
+ * Given an X or Y coordinate, return the block/quad coordinate that it
+ * belongs to.
+ */
+static INLINE int block( int x )
+{
+   return x & ~1;
+}
+
+
+/**
+ * Compute mask which indicates which pixels in the 2x2 quad are actually inside
+ * the triangle's bounds.
+ *
+ * this is pretty nasty...  may need to rework flush_spans again to
+ * fix it, if possible.
+ */
+static unsigned calculate_mask( struct setup_context *setup, int x )
+{
+   unsigned mask = 0x0;
+
+   if (x >= setup->span.left[0] && x < setup->span.right[0])
+      mask |= MASK_TOP_LEFT;
+
+   if (x >= setup->span.left[1] && x < setup->span.right[1])
+      mask |= MASK_BOTTOM_LEFT;
+
+   if (x+1 >= setup->span.left[0] && x+1 < setup->span.right[0])
+      mask |= MASK_TOP_RIGHT;
+
+   if (x+1 >= setup->span.left[1] && x+1 < setup->span.right[1])
+      mask |= MASK_BOTTOM_RIGHT;
+
+   return mask;
+}
+
+
+/**
+ * Render a horizontal span of quads
+ */
+static void flush_spans( struct setup_context *setup )
+{
+   int minleft, maxright;
+   int x;
+
+   switch (setup->span.y_flags) {
+   case 0x3:
+      /* both odd and even lines written (both quad rows) */
+      minleft = MIN2(setup->span.left[0], setup->span.left[1]);
+      maxright = MAX2(setup->span.right[0], setup->span.right[1]);
+      break;
+
+   case 0x1:
+      /* only even line written (quad top row) */
+      minleft = setup->span.left[0];
+      maxright = setup->span.right[0];
+      break;
+
+   case 0x2:
+      /* only odd line written (quad bottom row) */
+      minleft = setup->span.left[1];
+      maxright = setup->span.right[1];
+      break;
+
+   default:
+      return;
+   }
+
+   /* XXX this loop could be moved into the above switch cases and
+    * calculate_mask() could be simplified a bit...
+    */
+   for (x = block(minleft); x <= block(maxright); x += 2) {
+      emit_quad( setup, x, setup->span.y,
+                 calculate_mask( setup, x ) );
+   }
+
+   setup->span.y = 0;
+   setup->span.y_flags = 0;
+   setup->span.right[0] = 0;
+   setup->span.right[1] = 0;
+}
+
+#if DEBUG_VERTS
+static void print_vertex(const struct setup_context *setup,
+                         const float (*v)[4])
+{
+   int i;
+   debug_printf("Vertex: (%p)\n", v);
+   for (i = 0; i < setup->quad.nr_attrs; i++) {
+      debug_printf("  %d: %f %f %f %f\n",  i,
+              v[i][0], v[i][1], v[i][2], v[i][3]);
+   }
+}
+#endif
+
+static boolean setup_sort_vertices( struct setup_context *setup,
+                                    float det,
+                                    const float (*v0)[4],
+                                    const float (*v1)[4],
+                                    const float (*v2)[4] )
+{
+#if DEBUG_VERTS
+   debug_printf("Triangle:\n");
+   print_vertex(setup, v0);
+   print_vertex(setup, v1);
+   print_vertex(setup, v2);
+#endif
+
+   setup->vprovoke = v2;
+
+   /* determine bottom to top order of vertices */
+   {
+      float y0 = v0[0][1];
+      float y1 = v1[0][1];
+      float y2 = v2[0][1];
+      if (y0 <= y1) {
+	 if (y1 <= y2) {
+	    /* y0<=y1<=y2 */
+	    setup->vmin = v0;
+	    setup->vmid = v1;
+	    setup->vmax = v2;
+	 }
+	 else if (y2 <= y0) {
+	    /* y2<=y0<=y1 */
+	    setup->vmin = v2;
+	    setup->vmid = v0;
+	    setup->vmax = v1;
+	 }
+	 else {
+	    /* y0<=y2<=y1 */
+	    setup->vmin = v0;
+	    setup->vmid = v2;
+	    setup->vmax = v1;
+	 }
+      }
+      else {
+	 if (y0 <= y2) {
+	    /* y1<=y0<=y2 */
+	    setup->vmin = v1;
+	    setup->vmid = v0;
+	    setup->vmax = v2;
+	 }
+	 else if (y2 <= y1) {
+	    /* y2<=y1<=y0 */
+	    setup->vmin = v2;
+	    setup->vmid = v1;
+	    setup->vmax = v0;
+	 }
+	 else {
+	    /* y1<=y2<=y0 */
+	    setup->vmin = v1;
+	    setup->vmid = v2;
+	    setup->vmax = v0;
+	 }
+      }
+   }
+
+   setup->ebot.dx = setup->vmid[0][0] - setup->vmin[0][0];
+   setup->ebot.dy = setup->vmid[0][1] - setup->vmin[0][1];
+   setup->emaj.dx = setup->vmax[0][0] - setup->vmin[0][0];
+   setup->emaj.dy = setup->vmax[0][1] - setup->vmin[0][1];
+   setup->etop.dx = setup->vmax[0][0] - setup->vmid[0][0];
+   setup->etop.dy = setup->vmax[0][1] - setup->vmid[0][1];
+
+   /*
+    * Compute triangle's area.  Use 1/area to compute partial
+    * derivatives of attributes later.
+    *
+    * The area will be the same as prim->det, but the sign may be
+    * different depending on how the vertices get sorted above.
+    *
+    * To determine whether the primitive is front or back facing we
+    * use the prim->det value because its sign is correct.
+    */
+   {
+      const float area = (setup->emaj.dx * setup->ebot.dy -
+			    setup->ebot.dx * setup->emaj.dy);
+
+      setup->oneoverarea = 1.0f / area;
+      /*
+      debug_printf("%s one-over-area %f  area %f  det %f\n",
+                   __FUNCTION__, setup->oneoverarea, area, det );
+      */
+   }
+
+   /* We need to know if this is a front or back-facing triangle for:
+    *  - the GLSL gl_FrontFacing fragment attribute (bool)
+    *  - two-sided stencil test
+    */
+   setup->quad.facing = (det > 0.0) ^ (setup->softpipe->rasterizer->front_winding == PIPE_WINDING_CW);
+
+   return TRUE;
+}
+
+
+/**
+ * Compute a0 for a constant-valued coefficient (GL_FLAT shading).
+ * The value value comes from vertex[slot][i].
+ * The result will be put into setup->coef[slot].a0[i].
+ * \param slot  which attribute slot
+ * \param i  which component of the slot (0..3)
+ */
+static void const_coeff( struct setup_context *setup,
+                         struct tgsi_interp_coef *coef,
+                         uint vertSlot, uint i)
+{
+   assert(i <= 3);
+
+   coef->dadx[i] = 0;
+   coef->dady[i] = 0;
+
+   /* need provoking vertex info!
+    */
+   coef->a0[i] = setup->vprovoke[vertSlot][i];
+}
+
+
+/**
+ * Compute a0, dadx and dady for a linearly interpolated coefficient,
+ * for a triangle.
+ */
+static void tri_linear_coeff( struct setup_context *setup,
+                              struct tgsi_interp_coef *coef,
+                              uint vertSlot, uint i)
+{
+   float botda = setup->vmid[vertSlot][i] - setup->vmin[vertSlot][i];
+   float majda = setup->vmax[vertSlot][i] - setup->vmin[vertSlot][i];
+   float a = setup->ebot.dy * majda - botda * setup->emaj.dy;
+   float b = setup->emaj.dx * botda - majda * setup->ebot.dx;
+   float dadx = a * setup->oneoverarea;
+   float dady = b * setup->oneoverarea;
+
+   assert(i <= 3);
+
+   coef->dadx[i] = dadx;
+   coef->dady[i] = dady;
+
+   /* calculate a0 as the value which would be sampled for the
+    * fragment at (0,0), taking into account that we want to sample at
+    * pixel centers, in other words (0.5, 0.5).
+    *
+    * this is neat but unfortunately not a good way to do things for
+    * triangles with very large values of dadx or dady as it will
+    * result in the subtraction and re-addition from a0 of a very
+    * large number, which means we'll end up loosing a lot of the
+    * fractional bits and precision from a0.  the way to fix this is
+    * to define a0 as the sample at a pixel center somewhere near vmin
+    * instead - i'll switch to this later.
+    */
+   coef->a0[i] = (setup->vmin[vertSlot][i] -
+                  (dadx * (setup->vmin[0][0] - 0.5f) +
+                   dady * (setup->vmin[0][1] - 0.5f)));
+
+   /*
+   debug_printf("attr[%d].%c: %f dx:%f dy:%f\n",
+		slot, "xyzw"[i],
+		setup->coef[slot].a0[i],
+		setup->coef[slot].dadx[i],
+		setup->coef[slot].dady[i]);
+   */
+}
+
+
+/**
+ * Compute a0, dadx and dady for a perspective-corrected interpolant,
+ * for a triangle.
+ * We basically multiply the vertex value by 1/w before computing
+ * the plane coefficients (a0, dadx, dady).
+ * Later, when we compute the value at a particular fragment position we'll
+ * divide the interpolated value by the interpolated W at that fragment.
+ */
+static void tri_persp_coeff( struct setup_context *setup,
+                             struct tgsi_interp_coef *coef,
+                             uint vertSlot, uint i)
+{
+   /* premultiply by 1/w  (v[0][3] is always W):
+    */
+   float mina = setup->vmin[vertSlot][i] * setup->vmin[0][3];
+   float mida = setup->vmid[vertSlot][i] * setup->vmid[0][3];
+   float maxa = setup->vmax[vertSlot][i] * setup->vmax[0][3];
+   float botda = mida - mina;
+   float majda = maxa - mina;
+   float a = setup->ebot.dy * majda - botda * setup->emaj.dy;
+   float b = setup->emaj.dx * botda - majda * setup->ebot.dx;
+   float dadx = a * setup->oneoverarea;
+   float dady = b * setup->oneoverarea;
+
+   /*
+   debug_printf("tri persp %d,%d: %f %f %f\n", vertSlot, i,
+          	setup->vmin[vertSlot][i],
+          	setup->vmid[vertSlot][i],
+       		setup->vmax[vertSlot][i]
+          );
+   */
+   assert(i <= 3);
+
+   coef->dadx[i] = dadx;
+   coef->dady[i] = dady;
+   coef->a0[i] = (mina -
+                  (dadx * (setup->vmin[0][0] - 0.5f) +
+                   dady * (setup->vmin[0][1] - 0.5f)));
+}
+
+
+/**
+ * Special coefficient setup for gl_FragCoord.
+ * X and Y are trivial, though Y has to be inverted for OpenGL.
+ * Z and W are copied from posCoef which should have already been computed.
+ * We could do a bit less work if we'd examine gl_FragCoord's swizzle mask.
+ */
+static void
+setup_fragcoord_coeff(struct setup_context *setup, uint slot)
+{
+   /*X*/
+   setup->coef[slot].a0[0] = 0;
+   setup->coef[slot].dadx[0] = 1.0;
+   setup->coef[slot].dady[0] = 0.0;
+   /*Y*/
+   if (setup->softpipe->rasterizer->origin_lower_left) {
+      /* y=0=bottom */
+      const int winHeight = setup->softpipe->framebuffer.height;
+      setup->coef[slot].a0[1] = (float) (winHeight - 1);
+      setup->coef[slot].dady[1] = -1.0;
+   }
+   else {
+      /* y=0=top */
+      setup->coef[slot].a0[1] = 0.0;
+      setup->coef[slot].dady[1] = 1.0;
+   }
+   setup->coef[slot].dadx[1] = 0.0;
+   /*Z*/
+   setup->coef[slot].a0[2] = setup->posCoef.a0[2];
+   setup->coef[slot].dadx[2] = setup->posCoef.dadx[2];
+   setup->coef[slot].dady[2] = setup->posCoef.dady[2];
+   /*W*/
+   setup->coef[slot].a0[3] = setup->posCoef.a0[3];
+   setup->coef[slot].dadx[3] = setup->posCoef.dadx[3];
+   setup->coef[slot].dady[3] = setup->posCoef.dady[3];
+}
+
+
+
+/**
+ * Compute the setup->coef[] array dadx, dady, a0 values.
+ * Must be called after setup->vmin,vmid,vmax,vprovoke are initialized.
+ */
+static void setup_tri_coefficients( struct setup_context *setup )
+{
+   struct softpipe_context *softpipe = setup->softpipe;
+   const struct sp_fragment_shader *spfs = softpipe->fs;
+   const struct vertex_info *vinfo = softpipe_get_vertex_info(softpipe);
+   uint fragSlot;
+
+   /* z and w are done by linear interpolation:
+    */
+   tri_linear_coeff(setup, &setup->posCoef, 0, 2);
+   tri_linear_coeff(setup, &setup->posCoef, 0, 3);
+
+   /* setup interpolation for all the remaining attributes:
+    */
+   for (fragSlot = 0; fragSlot < spfs->info.num_inputs; fragSlot++) {
+      const uint vertSlot = vinfo->src_index[fragSlot];
+      uint j;
+
+      switch (vinfo->interp_mode[fragSlot]) {
+      case INTERP_CONSTANT:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            const_coeff(setup, &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_LINEAR:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            tri_linear_coeff(setup, &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_PERSPECTIVE:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            tri_persp_coeff(setup, &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_POS:
+         setup_fragcoord_coeff(setup, fragSlot);
+         break;
+      default:
+         assert(0);
+      }
+
+      if (spfs->info.input_semantic_name[fragSlot] == TGSI_SEMANTIC_FOG) {
+         /* FOG.y = front/back facing  XXX fix this */
+         setup->coef[fragSlot].a0[1] = 1.0f - setup->quad.facing;
+         setup->coef[fragSlot].dadx[1] = 0.0;
+         setup->coef[fragSlot].dady[1] = 0.0;
+      }
+   }
+}
+
+
+
+static void setup_tri_edges( struct setup_context *setup )
+{
+   float vmin_x = setup->vmin[0][0] + 0.5f;
+   float vmid_x = setup->vmid[0][0] + 0.5f;
+
+   float vmin_y = setup->vmin[0][1] - 0.5f;
+   float vmid_y = setup->vmid[0][1] - 0.5f;
+   float vmax_y = setup->vmax[0][1] - 0.5f;
+
+   setup->emaj.sy = CEILF(vmin_y);
+   setup->emaj.lines = (int) CEILF(vmax_y - setup->emaj.sy);
+   setup->emaj.dxdy = setup->emaj.dx / setup->emaj.dy;
+   setup->emaj.sx = vmin_x + (setup->emaj.sy - vmin_y) * setup->emaj.dxdy;
+
+   setup->etop.sy = CEILF(vmid_y);
+   setup->etop.lines = (int) CEILF(vmax_y - setup->etop.sy);
+   setup->etop.dxdy = setup->etop.dx / setup->etop.dy;
+   setup->etop.sx = vmid_x + (setup->etop.sy - vmid_y) * setup->etop.dxdy;
+
+   setup->ebot.sy = CEILF(vmin_y);
+   setup->ebot.lines = (int) CEILF(vmid_y - setup->ebot.sy);
+   setup->ebot.dxdy = setup->ebot.dx / setup->ebot.dy;
+   setup->ebot.sx = vmin_x + (setup->ebot.sy - vmin_y) * setup->ebot.dxdy;
+}
+
+
+/**
+ * Render the upper or lower half of a triangle.
+ * Scissoring/cliprect is applied here too.
+ */
+static void subtriangle( struct setup_context *setup,
+			 struct edge *eleft,
+			 struct edge *eright,
+			 unsigned lines )
+{
+   const struct pipe_scissor_state *cliprect = &setup->softpipe->cliprect;
+   const int minx = (int) cliprect->minx;
+   const int maxx = (int) cliprect->maxx;
+   const int miny = (int) cliprect->miny;
+   const int maxy = (int) cliprect->maxy;
+   int y, start_y, finish_y;
+   int sy = (int)eleft->sy;
+
+   assert((int)eleft->sy == (int) eright->sy);
+
+   /* clip top/bottom */
+   start_y = sy;
+   finish_y = sy + lines;
+
+   if (start_y < miny)
+      start_y = miny;
+
+   if (finish_y > maxy)
+      finish_y = maxy;
+
+   start_y -= sy;
+   finish_y -= sy;
+
+   /*
+   debug_printf("%s %d %d\n", __FUNCTION__, start_y, finish_y);
+   */
+
+   for (y = start_y; y < finish_y; y++) {
+
+      /* avoid accumulating adds as floats don't have the precision to
+       * accurately iterate large triangle edges that way.  luckily we
+       * can just multiply these days.
+       *
+       * this is all drowned out by the attribute interpolation anyway.
+       */
+      int left = (int)(eleft->sx + y * eleft->dxdy);
+      int right = (int)(eright->sx + y * eright->dxdy);
+
+      /* clip left/right */
+      if (left < minx)
+         left = minx;
+      if (right > maxx)
+         right = maxx;
+
+      if (left < right) {
+         int _y = sy + y;
+         if (block(_y) != setup->span.y) {
+            flush_spans(setup);
+            setup->span.y = block(_y);
+         }
+
+         setup->span.left[_y&1] = left;
+         setup->span.right[_y&1] = right;
+         setup->span.y_flags |= 1<<(_y&1);
+      }
+   }
+
+
+   /* save the values so that emaj can be restarted:
+    */
+   eleft->sx += lines * eleft->dxdy;
+   eright->sx += lines * eright->dxdy;
+   eleft->sy += lines;
+   eright->sy += lines;
+}
+
+
+/**
+ * Do setup for triangle rasterization, then render the triangle.
+ */
+void setup_tri( struct setup_context *setup,
+                float det,
+                const float (*v0)[4],
+                const float (*v1)[4],
+                const float (*v2)[4] )
+{
+   /*
+   debug_printf("%s\n", __FUNCTION__ );
+   */
+
+#if DEBUG_FRAGS
+   setup->numFragsEmitted = 0;
+   setup->numFragsWritten = 0;
+#endif
+
+   setup_sort_vertices( setup, calc_det(v0, v1, v2),
+                        v0, v1, v2 );
+   setup_tri_coefficients( setup );
+   setup_tri_edges( setup );
+
+   setup->quad.prim = PRIM_TRI;
+
+   setup->span.y = 0;
+   setup->span.y_flags = 0;
+   setup->span.right[0] = 0;
+   setup->span.right[1] = 0;
+   /*   setup->span.z_mode = tri_z_mode( setup->ctx ); */
+
+   /*   init_constant_attribs( setup ); */
+
+   if (setup->oneoverarea < 0.0) {
+      /* emaj on left:
+       */
+      subtriangle( setup, &setup->emaj, &setup->ebot, setup->ebot.lines );
+      subtriangle( setup, &setup->emaj, &setup->etop, setup->etop.lines );
+   }
+   else {
+      /* emaj on right:
+       */
+      subtriangle( setup, &setup->ebot, &setup->emaj, setup->ebot.lines );
+      subtriangle( setup, &setup->etop, &setup->emaj, setup->etop.lines );
+   }
+
+   flush_spans( setup );
+
+#if DEBUG_FRAGS
+   printf("Tri: %u frags emitted, %u written\n",
+          setup->numFragsEmitted,
+          setup->numFragsWritten);
+#endif
+}
+
+
+
+/**
+ * Compute a0, dadx and dady for a linearly interpolated coefficient,
+ * for a line.
+ */
+static void
+line_linear_coeff(struct setup_context *setup,
+                  struct tgsi_interp_coef *coef,
+                  uint vertSlot, uint i)
+{
+   const float da = setup->vmax[vertSlot][i] - setup->vmin[vertSlot][i];
+   const float dadx = da * setup->emaj.dx * setup->oneoverarea;
+   const float dady = da * setup->emaj.dy * setup->oneoverarea;
+   coef->dadx[i] = dadx;
+   coef->dady[i] = dady;
+   coef->a0[i] = (setup->vmin[vertSlot][i] -
+                  (dadx * (setup->vmin[0][0] - 0.5f) +
+                   dady * (setup->vmin[0][1] - 0.5f)));
+}
+
+
+/**
+ * Compute a0, dadx and dady for a perspective-corrected interpolant,
+ * for a line.
+ */
+static void
+line_persp_coeff(struct setup_context *setup,
+                  struct tgsi_interp_coef *coef,
+                  uint vertSlot, uint i)
+{
+   /* XXX double-check/verify this arithmetic */
+   const float a0 = setup->vmin[vertSlot][i] * setup->vmin[0][3];
+   const float a1 = setup->vmax[vertSlot][i] * setup->vmax[0][3];
+   const float da = a1 - a0;
+   const float dadx = da * setup->emaj.dx * setup->oneoverarea;
+   const float dady = da * setup->emaj.dy * setup->oneoverarea;
+   coef->dadx[i] = dadx;
+   coef->dady[i] = dady;
+   coef->a0[i] = (setup->vmin[vertSlot][i] -
+                  (dadx * (setup->vmin[0][0] - 0.5f) +
+                   dady * (setup->vmin[0][1] - 0.5f)));
+}
+
+
+/**
+ * Compute the setup->coef[] array dadx, dady, a0 values.
+ * Must be called after setup->vmin,vmax are initialized.
+ */
+static INLINE void
+setup_line_coefficients(struct setup_context *setup,
+                        const float (*v0)[4],
+                        const float (*v1)[4])
+{
+   struct softpipe_context *softpipe = setup->softpipe;
+   const struct sp_fragment_shader *spfs = softpipe->fs;
+   const struct vertex_info *vinfo = softpipe_get_vertex_info(softpipe);
+   uint fragSlot;
+
+   /* use setup->vmin, vmax to point to vertices */
+   setup->vprovoke = v1;
+   setup->vmin = v0;
+   setup->vmax = v1;
+
+   setup->emaj.dx = setup->vmax[0][0] - setup->vmin[0][0];
+   setup->emaj.dy = setup->vmax[0][1] - setup->vmin[0][1];
+   /* NOTE: this is not really 1/area */
+   setup->oneoverarea = 1.0f / (setup->emaj.dx * setup->emaj.dx +
+                                setup->emaj.dy * setup->emaj.dy);
+
+   /* z and w are done by linear interpolation:
+    */
+   line_linear_coeff(setup, &setup->posCoef, 0, 2);
+   line_linear_coeff(setup, &setup->posCoef, 0, 3);
+
+   /* setup interpolation for all the remaining attributes:
+    */
+   for (fragSlot = 0; fragSlot < spfs->info.num_inputs; fragSlot++) {
+      const uint vertSlot = vinfo->src_index[fragSlot];
+      uint j;
+
+      switch (vinfo->interp_mode[fragSlot]) {
+      case INTERP_CONSTANT:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            const_coeff(setup, &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_LINEAR:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            line_linear_coeff(setup, &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_PERSPECTIVE:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            line_persp_coeff(setup, &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_POS:
+         setup_fragcoord_coeff(setup, fragSlot);
+         break;
+      default:
+         assert(0);
+      }
+
+      if (spfs->info.input_semantic_name[fragSlot] == TGSI_SEMANTIC_FOG) {
+         /* FOG.y = front/back facing  XXX fix this */
+         setup->coef[fragSlot].a0[1] = 1.0f - setup->quad.facing;
+         setup->coef[fragSlot].dadx[1] = 0.0;
+         setup->coef[fragSlot].dady[1] = 0.0;
+      }
+   }
+}
+
+
+/**
+ * Plot a pixel in a line segment.
+ */
+static INLINE void
+plot(struct setup_context *setup, int x, int y)
+{
+   const int iy = y & 1;
+   const int ix = x & 1;
+   const int quadX = x - ix;
+   const int quadY = y - iy;
+   const int mask = (1 << ix) << (2 * iy);
+
+   if (quadX != setup->quad.x0 ||
+       quadY != setup->quad.y0)
+   {
+      /* flush prev quad, start new quad */
+
+      if (setup->quad.x0 != -1)
+         clip_emit_quad(setup);
+
+      setup->quad.x0 = quadX;
+      setup->quad.y0 = quadY;
+      setup->quad.mask = 0x0;
+   }
+
+   setup->quad.mask |= mask;
+}
+
+
+/**
+ * Do setup for line rasterization, then render the line.
+ * Single-pixel width, no stipple, etc.  We rely on the 'draw' module
+ * to handle stippling and wide lines.
+ */
+void
+setup_line(struct setup_context *setup,
+           const float (*v0)[4],
+           const float (*v1)[4])
+{
+   int x0 = (int) v0[0][0];
+   int x1 = (int) v1[0][0];
+   int y0 = (int) v0[0][1];
+   int y1 = (int) v1[0][1];
+   int dx = x1 - x0;
+   int dy = y1 - y0;
+   int xstep, ystep;
+
+   if (dx == 0 && dy == 0)
+      return;
+
+   setup_line_coefficients(setup, v0, v1);
+
+   if (dx < 0) {
+      dx = -dx;   /* make positive */
+      xstep = -1;
+   }
+   else {
+      xstep = 1;
+   }
+
+   if (dy < 0) {
+      dy = -dy;   /* make positive */
+      ystep = -1;
+   }
+   else {
+      ystep = 1;
+   }
+
+   assert(dx >= 0);
+   assert(dy >= 0);
+
+   setup->quad.x0 = setup->quad.y0 = -1;
+   setup->quad.mask = 0x0;
+   setup->quad.prim = PRIM_LINE;
+   /* XXX temporary: set coverage to 1.0 so the line appears
+    * if AA mode happens to be enabled.
+    */
+   setup->quad.coverage[0] =
+   setup->quad.coverage[1] =
+   setup->quad.coverage[2] =
+   setup->quad.coverage[3] = 1.0;
+
+   if (dx > dy) {
+      /*** X-major line ***/
+      int i;
+      const int errorInc = dy + dy;
+      int error = errorInc - dx;
+      const int errorDec = error - dx;
+
+      for (i = 0; i < dx; i++) {
+         plot(setup, x0, y0);
+
+         x0 += xstep;
+         if (error < 0) {
+            error += errorInc;
+         }
+         else {
+            error += errorDec;
+            y0 += ystep;
+         }
+      }
+   }
+   else {
+      /*** Y-major line ***/
+      int i;
+      const int errorInc = dx + dx;
+      int error = errorInc - dy;
+      const int errorDec = error - dy;
+
+      for (i = 0; i < dy; i++) {
+         plot(setup, x0, y0);
+
+         y0 += ystep;
+         if (error < 0) {
+            error += errorInc;
+         }
+         else {
+            error += errorDec;
+            x0 += xstep;
+         }
+      }
+   }
+
+   /* draw final quad */
+   if (setup->quad.mask) {
+      clip_emit_quad(setup);
+   }
+}
+
+
+static void
+point_persp_coeff(struct setup_context *setup,
+                  const float (*vert)[4],
+                  struct tgsi_interp_coef *coef,
+                  uint vertSlot, uint i)
+{
+   assert(i <= 3);
+   coef->dadx[i] = 0.0F;
+   coef->dady[i] = 0.0F;
+   coef->a0[i] = vert[vertSlot][i] * vert[0][3];
+}
+
+
+/**
+ * Do setup for point rasterization, then render the point.
+ * Round or square points...
+ * XXX could optimize a lot for 1-pixel points.
+ */
+void
+setup_point( struct setup_context *setup,
+             const float (*v0)[4] )
+{
+   struct softpipe_context *softpipe = setup->softpipe;
+   const struct sp_fragment_shader *spfs = softpipe->fs;
+   const int sizeAttr = setup->softpipe->psize_slot;
+   const float size
+      = sizeAttr > 0 ? v0[sizeAttr][0]
+      : setup->softpipe->rasterizer->point_size;
+   const float halfSize = 0.5F * size;
+   const boolean round = (boolean) setup->softpipe->rasterizer->point_smooth;
+   const float x = v0[0][0];  /* Note: data[0] is always position */
+   const float y = v0[0][1];
+   const struct vertex_info *vinfo = softpipe_get_vertex_info(softpipe);
+   uint fragSlot;
+
+   /* For points, all interpolants are constant-valued.
+    * However, for point sprites, we'll need to setup texcoords appropriately.
+    * XXX: which coefficients are the texcoords???
+    * We may do point sprites as textured quads...
+    *
+    * KW: We don't know which coefficients are texcoords - ultimately
+    * the choice of what interpolation mode to use for each attribute
+    * should be determined by the fragment program, using
+    * per-attribute declaration statements that include interpolation
+    * mode as a parameter.  So either the fragment program will have
+    * to be adjusted for pointsprite vs normal point behaviour, or
+    * otherwise a special interpolation mode will have to be defined
+    * which matches the required behaviour for point sprites.  But -
+    * the latter is not a feature of normal hardware, and as such
+    * probably should be ruled out on that basis.
+    */
+   setup->vprovoke = v0;
+
+   /* setup Z, W */
+   const_coeff(setup, &setup->posCoef, 0, 2);
+   const_coeff(setup, &setup->posCoef, 0, 3);
+
+   for (fragSlot = 0; fragSlot < spfs->info.num_inputs; fragSlot++) {
+      const uint vertSlot = vinfo->src_index[fragSlot];
+      uint j;
+
+      switch (vinfo->interp_mode[fragSlot]) {
+      case INTERP_CONSTANT:
+         /* fall-through */
+      case INTERP_LINEAR:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            const_coeff(setup, &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_PERSPECTIVE:
+         for (j = 0; j < NUM_CHANNELS; j++)
+            point_persp_coeff(setup, setup->vprovoke,
+                              &setup->coef[fragSlot], vertSlot, j);
+         break;
+      case INTERP_POS:
+         setup_fragcoord_coeff(setup, fragSlot);
+         break;
+      default:
+         assert(0);
+      }
+
+      if (spfs->info.input_semantic_name[fragSlot] == TGSI_SEMANTIC_FOG) {
+         /* FOG.y = front/back facing  XXX fix this */
+         setup->coef[fragSlot].a0[1] = 1.0f - setup->quad.facing;
+         setup->coef[fragSlot].dadx[1] = 0.0;
+         setup->coef[fragSlot].dady[1] = 0.0;
+      }
+   }
+
+   setup->quad.prim = PRIM_POINT;
+
+   if (halfSize <= 0.5 && !round) {
+      /* special case for 1-pixel points */
+      const int ix = ((int) x) & 1;
+      const int iy = ((int) y) & 1;
+      setup->quad.x0 = (int) x - ix;
+      setup->quad.y0 = (int) y - iy;
+      setup->quad.mask = (1 << ix) << (2 * iy);
+      clip_emit_quad(setup);
+   }
+   else {
+      if (round) {
+         /* rounded points */
+         const int ixmin = block((int) (x - halfSize));
+         const int ixmax = block((int) (x + halfSize));
+         const int iymin = block((int) (y - halfSize));
+         const int iymax = block((int) (y + halfSize));
+         const float rmin = halfSize - 0.7071F;  /* 0.7071 = sqrt(2)/2 */
+         const float rmax = halfSize + 0.7071F;
+         const float rmin2 = MAX2(0.0F, rmin * rmin);
+         const float rmax2 = rmax * rmax;
+         const float cscale = 1.0F / (rmax2 - rmin2);
+         int ix, iy;
+
+         for (iy = iymin; iy <= iymax; iy += 2) {
+            for (ix = ixmin; ix <= ixmax; ix += 2) {
+               float dx, dy, dist2, cover;
+
+               setup->quad.mask = 0x0;
+
+               dx = (ix + 0.5f) - x;
+               dy = (iy + 0.5f) - y;
+               dist2 = dx * dx + dy * dy;
+               if (dist2 <= rmax2) {
+                  cover = 1.0F - (dist2 - rmin2) * cscale;
+                  setup->quad.coverage[QUAD_TOP_LEFT] = MIN2(cover, 1.0f);
+                  setup->quad.mask |= MASK_TOP_LEFT;
+               }
+
+               dx = (ix + 1.5f) - x;
+               dy = (iy + 0.5f) - y;
+               dist2 = dx * dx + dy * dy;
+               if (dist2 <= rmax2) {
+                  cover = 1.0F - (dist2 - rmin2) * cscale;
+                  setup->quad.coverage[QUAD_TOP_RIGHT] = MIN2(cover, 1.0f);
+                  setup->quad.mask |= MASK_TOP_RIGHT;
+               }
+
+               dx = (ix + 0.5f) - x;
+               dy = (iy + 1.5f) - y;
+               dist2 = dx * dx + dy * dy;
+               if (dist2 <= rmax2) {
+                  cover = 1.0F - (dist2 - rmin2) * cscale;
+                  setup->quad.coverage[QUAD_BOTTOM_LEFT] = MIN2(cover, 1.0f);
+                  setup->quad.mask |= MASK_BOTTOM_LEFT;
+               }
+
+               dx = (ix + 1.5f) - x;
+               dy = (iy + 1.5f) - y;
+               dist2 = dx * dx + dy * dy;
+               if (dist2 <= rmax2) {
+                  cover = 1.0F - (dist2 - rmin2) * cscale;
+                  setup->quad.coverage[QUAD_BOTTOM_RIGHT] = MIN2(cover, 1.0f);
+                  setup->quad.mask |= MASK_BOTTOM_RIGHT;
+               }
+
+               if (setup->quad.mask) {
+                  setup->quad.x0 = ix;
+                  setup->quad.y0 = iy;
+                  clip_emit_quad(setup);
+               }
+            }
+         }
+      }
+      else {
+         /* square points */
+         const int xmin = (int) (x + 0.75 - halfSize);
+         const int ymin = (int) (y + 0.25 - halfSize);
+         const int xmax = xmin + (int) size;
+         const int ymax = ymin + (int) size;
+         /* XXX could apply scissor to xmin,ymin,xmax,ymax now */
+         const int ixmin = block(xmin);
+         const int ixmax = block(xmax - 1);
+         const int iymin = block(ymin);
+         const int iymax = block(ymax - 1);
+         int ix, iy;
+
+         /*
+         debug_printf("(%f, %f) -> X:%d..%d Y:%d..%d\n", x, y, xmin, xmax,ymin,ymax);
+         */
+         for (iy = iymin; iy <= iymax; iy += 2) {
+            uint rowMask = 0xf;
+            if (iy < ymin) {
+               /* above the top edge */
+               rowMask &= (MASK_BOTTOM_LEFT | MASK_BOTTOM_RIGHT);
+            }
+            if (iy + 1 >= ymax) {
+               /* below the bottom edge */
+               rowMask &= (MASK_TOP_LEFT | MASK_TOP_RIGHT);
+            }
+
+            for (ix = ixmin; ix <= ixmax; ix += 2) {
+               uint mask = rowMask;
+
+               if (ix < xmin) {
+                  /* fragment is past left edge of point, turn off left bits */
+                  mask &= (MASK_BOTTOM_RIGHT | MASK_TOP_RIGHT);
+               }
+               if (ix + 1 >= xmax) {
+                  /* past the right edge */
+                  mask &= (MASK_BOTTOM_LEFT | MASK_TOP_LEFT);
+               }
+
+               setup->quad.mask = mask;
+               setup->quad.x0 = ix;
+               setup->quad.y0 = iy;
+               clip_emit_quad(setup);
+            }
+         }
+      }
+   }
+}
+
+void setup_prepare( struct setup_context *setup )
+{
+   struct softpipe_context *sp = setup->softpipe;
+   unsigned i;
+
+   if (sp->dirty) {
+      softpipe_update_derived(sp);
+   }
+
+   /* Mark surfaces as defined now */
+   for (i = 0; i < sp->framebuffer.num_cbufs; i++){
+      if (sp->framebuffer.cbufs[i]) {
+         sp->framebuffer.cbufs[i]->status = PIPE_SURFACE_STATUS_DEFINED;
+      }
+   }
+   if (sp->framebuffer.zsbuf) {
+      sp->framebuffer.zsbuf->status = PIPE_SURFACE_STATUS_DEFINED;
+   }
+
+   {
+      const struct sp_fragment_shader *fs = setup->softpipe->fs;
+      setup->quad.nr_attrs = fs->info.num_inputs;
+      sp->quad.first->begin(sp->quad.first);
+   }
+}
+
+
+
+void setup_destroy_context( struct setup_context *setup )
+{
+   FREE( setup );
+}
+
+
+/**
+ * Create a new primitive setup/render stage.
+ */
+struct setup_context *setup_create_context( struct softpipe_context *softpipe )
+{
+   struct setup_context *setup = CALLOC_STRUCT(setup_context);
+
+   setup->softpipe = softpipe;
+
+   setup->quad.coef = setup->coef;
+   setup->quad.posCoef = &setup->posCoef;
+
+   return setup;
+}