r300-gallium: Clean up vertex format setup.

2 files changed, 108 insertions, 76 deletions

diff --git a/src/gallium/drivers/r300/r300_context.h b/src/gallium/drivers/r300/r300_context.h
index fec2bad5461..4c695c1195a 100644
--- a/src/gallium/drivers/r300/r300_context.h
+++ b/src/gallium/drivers/r300/r300_context.h
@@ -60,7 +60,7 @@ struct r300_dsa_state {
 };
 
 struct r300_rs_state {
-    /* XXX icky as fucking hell */
+    /* Draw-specific rasterizer state */
     struct pipe_rasterizer_state rs;
 
     uint32_t vap_control_status;    /* R300_VAP_CNTL_STATUS: 0x2140 */
@@ -225,10 +225,11 @@ struct r300_vertex_format {
     uint32_t vap_prog_stream_cntl[8];
     /* R300_VAP_PROG_STREAK_CNTL_EXT_[0-7] */
     uint32_t vap_prog_stream_cntl_ext[8];
-    /* This is a map of VAP/SW TCL outputs into the GA/RS.
-     * tab[i] is the location of input i in GA/RS input memory.
-     * Named tab for historical reasons. */
-    int tab[16];
+    /* Map of vertex attributes into PVS memory for HW TCL,
+     * or GA memory for SW TCL. */
+    int vs_tab[16];
+    /* Map of rasterizer attributes from GB through RS to US. */
+    int fs_tab[16];
 };
 
 struct r300_vertex_shader {
diff --git a/src/gallium/drivers/r300/r300_state_derived.c b/src/gallium/drivers/r300/r300_state_derived.c
index f1feafbcf91..a777771930b 100644
--- a/src/gallium/drivers/r300/r300_state_derived.c
+++ b/src/gallium/drivers/r300/r300_state_derived.c
@@ -25,37 +25,35 @@
 /* r300_state_derived: Various bits of state which are dependent upon
  * currently bound CSO data. */
 
-/* Update the vertex_info struct in our r300_context.
- *
- * The vertex_info struct describes the post-TCL format of vertices. It is
- * required for Draw when doing SW TCL, and also for describing the
- * dreaded RS block on R300 chipsets. */
-static void r300_update_vertex_layout(struct r300_context* r300)
+/* Set up the vs_tab and routes. */
+static void r300_vs_tab_routes(struct r300_context* r300,
+                               struct r300_vertex_format* vformat)
 {
     struct r300_screen* r300screen = r300_screen(r300->context.screen);
-    struct r300_vertex_format vformat;
-    struct vertex_info vinfo;
+    struct vertex_info* vinfo = &vformat->vinfo;
+    int* tab = vformat->vs_tab;
     boolean pos = FALSE, psize = FALSE, fog = FALSE;
     int i, texs = 0, cols = 0;
-    int tab[16];
-
-    struct tgsi_shader_info* info = &r300->fs->info;
+    struct tgsi_shader_info* info;
 
-    memset(&vinfo, 0, sizeof(vinfo));
-    for (i = 0; i < 16; i++) {
-        tab[i] = -1;
+    if (r300screen->caps->has_tcl) {
+        /* Use vertex shader to determine required routes. */
+        info = &r300->vs->info;
+    } else {
+        /* Use fragment shader to determine required routes. */
+        info = &r300->fs->info;
     }
 
     assert(info->num_inputs <= 16);
-
     for (i = 0; i < info->num_inputs; i++) {
-        switch (info->input_semantic_name[i]) {
+        switch (info->output_semantic_name[i]) {
             case TGSI_SEMANTIC_POSITION:
                 pos = TRUE;
                 tab[i] = 0;
                 break;
             case TGSI_SEMANTIC_COLOR:
-                tab[i] = 2 + cols++;
+                tab[i] = 2 + cols;
+                cols++;
                 break;
             case TGSI_SEMANTIC_PSIZE:
                 psize = TRUE;
@@ -63,9 +61,10 @@ static void r300_update_vertex_layout(struct r300_context* r300)
                 break;
             case TGSI_SEMANTIC_FOG:
                 fog = TRUE;
-                /* Fall through... */
+                /* Fall through */
             case TGSI_SEMANTIC_GENERIC:
-                tab[i] = 6 + texs++;
+                tab[i] = 6 + texs;
+                texs++;
                 break;
             default:
                 debug_printf("r300: Unknown vertex input %d\n",
@@ -75,8 +74,8 @@ static void r300_update_vertex_layout(struct r300_context* r300)
     }
 
     if (r300screen->caps->has_tcl) {
+        /* Just copy vert attribs over as-is. */
         for (i = 0; i < info->num_inputs; i++) {
-            /* XXX should probably do real lookup with vert shader */
             tab[i] = i;
         }
     }
@@ -89,7 +88,7 @@ static void r300_update_vertex_layout(struct r300_context* r300)
      * vinfo.hwfmt[2] is R300_VAP_OUTPUT_VTX_FMT_0
      * vinfo.hwfmt[3] is R300_VAP_OUTPUT_VTX_FMT_1 */
 
-    vinfo.hwfmt[0] = 0x5555; /* XXX this is classic Mesa bonghits */
+    vinfo->hwfmt[0] = 0x5555; /* XXX this is classic Mesa bonghits */
 
     if (!pos) {
         debug_printf("r300: Forcing vertex position attribute emit...\n");
@@ -100,80 +99,112 @@ static void r300_update_vertex_layout(struct r300_context* r300)
         }
         tab[0] = 0;
 
-        draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_POS,
+        draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_POS,
             draw_find_vs_output(r300->draw, TGSI_SEMANTIC_POSITION, 0));
     } else {
-        draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_PERSPECTIVE,
+        draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE,
             draw_find_vs_output(r300->draw, TGSI_SEMANTIC_POSITION, 0));
     }
-    vinfo.hwfmt[1] |= R300_INPUT_CNTL_POS;
-    vinfo.hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT;
+    vinfo->hwfmt[1] |= R300_INPUT_CNTL_POS;
+    vinfo->hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT;
 
     if (psize) {
-        draw_emit_vertex_attr(&vinfo, EMIT_1F_PSIZE, INTERP_POS,
+        draw_emit_vertex_attr(vinfo, EMIT_1F_PSIZE, INTERP_POS,
             draw_find_vs_output(r300->draw, TGSI_SEMANTIC_PSIZE, 0));
-        vinfo.hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT;
+        vinfo->hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT;
     }
 
     for (i = 0; i < cols; i++) {
-        draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_LINEAR,
+        draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_LINEAR,
             draw_find_vs_output(r300->draw, TGSI_SEMANTIC_COLOR, i));
-        vinfo.hwfmt[1] |= R300_INPUT_CNTL_COLOR;
-        vinfo.hwfmt[2] |= (R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << i);
+        vinfo->hwfmt[1] |= R300_INPUT_CNTL_COLOR;
+        vinfo->hwfmt[2] |= (R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << i);
     }
 
     for (i = 0; i < texs; i++) {
-        draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_PERSPECTIVE,
+        draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE,
             draw_find_vs_output(r300->draw, TGSI_SEMANTIC_GENERIC, i));
-        vinfo.hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
-        vinfo.hwfmt[3] |= (4 << (3 * i));
+        vinfo->hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
+        vinfo->hwfmt[3] |= (4 << (3 * i));
     }
 
     if (fog) {
         i++;
-        draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_PERSPECTIVE,
+        draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE,
             draw_find_vs_output(r300->draw, TGSI_SEMANTIC_FOG, 0));
-        vinfo.hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
-        vinfo.hwfmt[3] |= (4 << (3 * i));
+        vinfo->hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
+        vinfo->hwfmt[3] |= (4 << (3 * i));
     }
 
-    draw_compute_vertex_size(&vinfo);
-
-    if (memcmp(&r300->vertex_info, &vinfo, sizeof(struct vertex_info))) {
-        uint32_t temp;
-        debug_printf("attrib count: %d, fp input count: %d\n",
-                vinfo.num_attribs, info->num_inputs);
-        for (i = 0; i < vinfo.num_attribs; i++) {
-            debug_printf("attrib: offset %d, interp %d, size %d,"
-                   " tab %d\n", vinfo.attrib[i].src_index,
-                   vinfo.attrib[i].interp_mode, vinfo.attrib[i].emit,
-                   tab[i]);
-        }
+    draw_compute_vertex_size(vinfo);
+}
 
-        for (i = 0; i < vinfo.num_attribs; i++) {
-            /* Make sure we have a proper destination for our attribute */
-            assert(tab[i] != -1);
-
-            temp = translate_vertex_data_type(vinfo.attrib[i].emit) |
-                (tab[i] << R300_DST_VEC_LOC_SHIFT);
-            if (i & 1) {
-                r300->vertex_info.vap_prog_stream_cntl[i >> 1] &= 0x0000ffff;
-                r300->vertex_info.vap_prog_stream_cntl[i >> 1] |= temp << 16;
-            } else {
-                r300->vertex_info.vap_prog_stream_cntl[i >> 1] &= 0xffff0000;
-                r300->vertex_info.vap_prog_stream_cntl[i >> 1] |= temp;
-            }
+/* Update the PSC tables. */
+static void r300_vertex_psc(struct r300_context* r300,
+                            struct r300_vertex_format* vformat)
+{
+    struct vertex_info* vinfo = &vformat->vinfo;
+    int* tab = vformat->vs_tab;
+    uint32_t temp;
+    int i;
+
+    debug_printf("r300: attrib count: %d\n", vinfo->num_attribs);
+    for (i = 0; i < vinfo->num_attribs; i++) {
+        debug_printf("r300: attrib: offset %d, interp %d, size %d,"
+               " tab %d\n", vinfo->attrib[i].src_index,
+               vinfo->attrib[i].interp_mode, vinfo->attrib[i].emit,
+               tab[i]);
+    }
 
-            r300->vertex_info.vap_prog_stream_cntl_ext[i >> 1] |=
-                (R300_VAP_SWIZZLE_XYZW << (i & 1 ? 16 : 0));
+    for (i = 0; i < vinfo->num_attribs; i++) {
+        /* Make sure we have a proper destination for our attribute */
+        assert(tab[i] != -1);
+
+        /* Add the attribute to the PSC table. */
+        temp = translate_vertex_data_type(vinfo->attrib[i].emit) |
+            (tab[i] << R300_DST_VEC_LOC_SHIFT);
+        if (i & 1) {
+            vformat->vap_prog_stream_cntl[i >> 1] &= 0x0000ffff;
+            vformat->vap_prog_stream_cntl[i >> 1] |= temp << 16;
+
+            vformat->vap_prog_stream_cntl_ext[i >> 1] |=
+                (R300_VAP_SWIZZLE_XYZW << 16);
+        } else {
+            vformat->vap_prog_stream_cntl[i >> 1] &= 0xffff0000;
+            vformat->vap_prog_stream_cntl[i >> 1] |= temp <<  0;
+
+            vformat->vap_prog_stream_cntl_ext[i >> 1] |=
+                (R300_VAP_SWIZZLE_XYZW <<  0);
         }
-        /* Set the last vector. */
-        i--;
-        r300->vertex_info.vap_prog_stream_cntl[i >> 1] |= (R300_LAST_VEC <<
-                (i & 1 ? 16 : 0));
+    }
+
+    /* Set the last vector in the PSC. */
+    i--;
+    vformat->vap_prog_stream_cntl[i >> 1] |=
+        (R300_LAST_VEC << (i & 1 ? 16 : 0));
+}
+
+/* Update the vertex format. */
+static void r300_update_vertex_format(struct r300_context* r300)
+{
+    struct r300_screen* r300screen = r300_screen(r300->context.screen);
+    struct r300_vertex_format vformat;
+    int i;
+
+    memset(&vformat, 0, sizeof(struct r300_vertex_format));
+    for (i = 0; i < 16; i++) {
+        vformat.vs_tab[i] = -1;
+        vformat.fs_tab[i] = -1;
+    }
+
+    r300_vs_tab_routes(r300, &vformat);
+
+    r300_vertex_psc(r300, &vformat);
 
-        memcpy(r300->vertex_info.tab, tab, sizeof(tab));
-        memcpy(&r300->vertex_info, &vinfo, sizeof(struct vertex_info));
+    if (memcmp(&r300->vertex_info, &vformat,
+                sizeof(struct r300_vertex_format))) {
+        memcpy(&r300->vertex_info, &vformat,
+                sizeof(struct r300_vertex_format));
         r300->dirty_state |= R300_NEW_VERTEX_FORMAT;
     }
 }
@@ -185,7 +216,7 @@ static void r300_update_rs_block(struct r300_context* r300)
 {
     struct r300_rs_block* rs = r300->rs_block;
     struct vertex_info* vinfo = &r300->vertex_info.vinfo;
-    int* tab = r300->vertex_info.tab;
+    int* tab = r300->vertex_info.vs_tab;
     int col_count = 0, fp_offset = 0, i, memory_pos, tex_count = 0;
 
     memset(rs, 0, sizeof(struct r300_rs_block));
@@ -307,7 +338,7 @@ void r300_update_derived_state(struct r300_context* r300)
 {
     if (r300->dirty_state &
             (R300_NEW_FRAGMENT_SHADER | R300_NEW_VERTEX_SHADER)) {
-        r300_update_vertex_layout(r300);
+        r300_update_vertex_format(r300);
     }
 
     if (r300->dirty_state & R300_NEW_VERTEX_FORMAT) {