/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2011, 2015 by Delphix. All rights reserved. */ #include #include #include #include #include #include #include "zfeature_common.h" #include /* * ZFS Feature Flags * ----------------- * * ZFS feature flags are used to provide fine-grained versioning to the ZFS * on-disk format. Once enabled on a pool feature flags replace the old * spa_version() number. * * Each new on-disk format change will be given a uniquely identifying string * guid rather than a version number. This avoids the problem of different * organizations creating new on-disk formats with the same version number. To * keep feature guids unique they should consist of the reverse dns name of the * organization which implemented the feature and a short name for the feature, * separated by a colon (e.g. com.delphix:async_destroy). * * Reference Counts * ---------------- * * Within each pool features can be in one of three states: disabled, enabled, * or active. These states are differentiated by a reference count stored on * disk for each feature: * * 1) If there is no reference count stored on disk the feature is disabled. * 2) If the reference count is 0 a system administrator has enabled the * feature, but the feature has not been used yet, so no on-disk * format changes have been made. * 3) If the reference count is greater than 0 the feature is active. * The format changes required by the feature are currently on disk. * Note that if the feature's format changes are reversed the feature * may choose to set its reference count back to 0. * * Feature flags makes no differentiation between non-zero reference counts * for an active feature (e.g. a reference count of 1 means the same thing as a * reference count of 27834721), but feature implementations may choose to use * the reference count to store meaningful information. For example, a new RAID * implementation might set the reference count to the number of vdevs using * it. If all those disks are removed from the pool the feature goes back to * having a reference count of 0. * * It is the responsibility of the individual features to maintain a non-zero * reference count as long as the feature's format changes are present on disk. * * Dependencies * ------------ * * Each feature may depend on other features. The only effect of this * relationship is that when a feature is enabled all of its dependencies are * automatically enabled as well. Any future work to support disabling of * features would need to ensure that features cannot be disabled if other * enabled features depend on them. * * On-disk Format * -------------- * * When feature flags are enabled spa_version() is set to SPA_VERSION_FEATURES * (5000). In order for this to work the pool is automatically upgraded to * SPA_VERSION_BEFORE_FEATURES (28) first, so all pre-feature flags on disk * format changes will be in use. * * Information about features is stored in 3 ZAP objects in the pool's MOS. * These objects are linked to by the following names in the pool directory * object: * * 1) features_for_read: feature guid -> reference count * Features needed to open the pool for reading. * 2) features_for_write: feature guid -> reference count * Features needed to open the pool for writing. * 3) feature_descriptions: feature guid -> descriptive string * A human readable string. * * All enabled features appear in either features_for_read or * features_for_write, but not both. * * To open a pool in read-only mode only the features listed in * features_for_read need to be supported. * * To open the pool in read-write mode features in both features_for_read and * features_for_write need to be supported. * * Some features may be required to read the ZAP objects containing feature * information. To allow software to check for compatibility with these features * before the pool is opened their names must be stored in the label in a * new "features_for_read" entry (note that features that are only required * to write to a pool never need to be stored in the label since the * features_for_write ZAP object can be read before the pool is written to). * To save space in the label features must be explicitly marked as needing to * be written to the label. Also, reference counts are not stored in the label, * instead any feature whose reference count drops to 0 is removed from the * label. * * Adding New Features * ------------------- * * Features must be registered in zpool_feature_init() function in * zfeature_common.c using the zfeature_register() function. This function * has arguments to specify if the feature should be stored in the * features_for_read or features_for_write ZAP object and if it needs to be * written to the label when active. * * Once a feature is registered it will appear as a "feature@" * property which can be set by an administrator. Feature implementors should * use the spa_feature_is_enabled() and spa_feature_is_active() functions to * query the state of a feature and the spa_feature_incr() and * spa_feature_decr() functions to change an enabled feature's reference count. * Reference counts may only be updated in the syncing context. * * Features may not perform enable-time initialization. Instead, any such * initialization should occur when the feature is first used. This design * enforces that on-disk changes be made only when features are used. Code * should only check if a feature is enabled using spa_feature_is_enabled(), * not by relying on any feature specific metadata existing. If a feature is * enabled, but the feature's metadata is not on disk yet then it should be * created as needed. * * As an example, consider the com.delphix:async_destroy feature. This feature * relies on the existence of a bptree in the MOS that store blocks for * asynchronous freeing. This bptree is not created when async_destroy is * enabled. Instead, when a dataset is destroyed spa_feature_is_enabled() is * called to check if async_destroy is enabled. If it is and the bptree object * does not exist yet, the bptree object is created as part of the dataset * destroy and async_destroy's reference count is incremented to indicate it * has made an on-disk format change. Later, after the destroyed dataset's * blocks have all been asynchronously freed there is no longer any use for the * bptree object, so it is destroyed and async_destroy's reference count is * decremented back to 0 to indicate that it has undone its on-disk format * changes. */ typedef enum { FEATURE_ACTION_INCR, FEATURE_ACTION_DECR, } feature_action_t; /* * Checks that the active features in the pool are supported by * this software. Adds each unsupported feature (name -> description) to * the supplied nvlist. */ boolean_t spa_features_check(spa_t *spa, boolean_t for_write, nvlist_t *unsup_feat, nvlist_t *enabled_feat) { objset_t *os = spa->spa_meta_objset; boolean_t supported; zap_cursor_t *zc; zap_attribute_t *za; uint64_t obj = for_write ? spa->spa_feat_for_write_obj : spa->spa_feat_for_read_obj; char *buf; zc = kmem_alloc(sizeof (zap_cursor_t), KM_SLEEP); za = kmem_alloc(sizeof (zap_attribute_t), KM_SLEEP); buf = kmem_alloc(MAXPATHLEN, KM_SLEEP); supported = B_TRUE; for (zap_cursor_init(zc, os, obj); zap_cursor_retrieve(zc, za) == 0; zap_cursor_advance(zc)) { ASSERT(za->za_integer_length == sizeof (uint64_t) && za->za_num_integers == 1); if (NULL != enabled_feat) { fnvlist_add_uint64(enabled_feat, za->za_name, za->za_first_integer); } if (za->za_first_integer != 0 && !zfeature_is_supported(za->za_name)) { supported = B_FALSE; if (NULL != unsup_feat) { char *desc = ""; if (zap_lookup(os, spa->spa_feat_desc_obj, za->za_name, 1, MAXPATHLEN, buf) == 0) desc = buf; VERIFY(nvlist_add_string(unsup_feat, za->za_name, desc) == 0); } } } zap_cursor_fini(zc); kmem_free(buf, MAXPATHLEN); kmem_free(za, sizeof (zap_attribute_t)); kmem_free(zc, sizeof (zap_cursor_t)); return (supported); } /* * Use an in-memory cache of feature refcounts for quick retrieval. * * Note: well-designed features will not need to use this; they should * use spa_feature_is_enabled() and spa_feature_is_active() instead. * However, this is non-static for zdb, zhack, and spa_add_feature_stats(). */ int feature_get_refcount(spa_t *spa, zfeature_info_t *feature, uint64_t *res) { ASSERT(VALID_FEATURE_FID(feature->fi_feature)); if (spa->spa_feat_refcount_cache[feature->fi_feature] == SPA_FEATURE_DISABLED) { return (SET_ERROR(ENOTSUP)); } *res = spa->spa_feat_refcount_cache[feature->fi_feature]; return (0); } /* * Note: well-designed features will not need to use this; they should * use spa_feature_is_enabled() and spa_feature_is_active() instead. * However, this is non-static for zdb and zhack. */ int feature_get_refcount_from_disk(spa_t *spa, zfeature_info_t *feature, uint64_t *res) { int err; uint64_t refcount; uint64_t zapobj = (feature->fi_flags & ZFEATURE_FLAG_READONLY_COMPAT) ? spa->spa_feat_for_write_obj : spa->spa_feat_for_read_obj; /* * If the pool is currently being created, the feature objects may not * have been allocated yet. Act as though all features are disabled. */ if (zapobj == 0) return (SET_ERROR(ENOTSUP)); err = zap_lookup(spa->spa_meta_objset, zapobj, feature->fi_guid, sizeof (uint64_t), 1, &refcount); if (err != 0) { if (err == ENOENT) return (SET_ERROR(ENOTSUP)); else return (err); } *res = refcount; return (0); } static int feature_get_enabled_txg(spa_t *spa, zfeature_info_t *feature, uint64_t *res) { ASSERTV(uint64_t enabled_txg_obj = spa->spa_feat_enabled_txg_obj); ASSERT(zfeature_depends_on(feature->fi_feature, SPA_FEATURE_ENABLED_TXG)); if (!spa_feature_is_enabled(spa, feature->fi_feature)) { return (SET_ERROR(ENOTSUP)); } ASSERT(enabled_txg_obj != 0); VERIFY0(zap_lookup(spa->spa_meta_objset, spa->spa_feat_enabled_txg_obj, feature->fi_guid, sizeof (uint64_t), 1, res)); return (0); } /* * This function is non-static for zhack; it should otherwise not be used * outside this file. */ void feature_sync(spa_t *spa, zfeature_info_t *feature, uint64_t refcount, dmu_tx_t *tx) { uint64_t zapobj; ASSERT(VALID_FEATURE_OR_NONE(feature->fi_feature)); zapobj = (feature->fi_flags & ZFEATURE_FLAG_READONLY_COMPAT) ? spa->spa_feat_for_write_obj : spa->spa_feat_for_read_obj; VERIFY0(zap_update(spa->spa_meta_objset, zapobj, feature->fi_guid, sizeof (uint64_t), 1, &refcount, tx)); /* * feature_sync is called directly from zhack, allowing the * creation of arbitrary features whose fi_feature field may * be greater than SPA_FEATURES. When called from zhack, the * zfeature_info_t object's fi_feature field will be set to * SPA_FEATURE_NONE. */ if (feature->fi_feature != SPA_FEATURE_NONE) { uint64_t *refcount_cache = &spa->spa_feat_refcount_cache[feature->fi_feature]; VERIFY3U(*refcount_cache, ==, atomic_swap_64(refcount_cache, refcount)); } if (refcount == 0) spa_deactivate_mos_feature(spa, feature->fi_guid); else if (feature->fi_flags & ZFEATURE_FLAG_MOS) spa_activate_mos_feature(spa, feature->fi_guid, tx); } /* * This function is non-static for zhack; it should otherwise not be used * outside this file. */ void feature_enable_sync(spa_t *spa, zfeature_info_t *feature, dmu_tx_t *tx) { uint64_t initial_refcount = (feature->fi_flags & ZFEATURE_FLAG_ACTIVATE_ON_ENABLE) ? 1 : 0; uint64_t zapobj = (feature->fi_flags & ZFEATURE_FLAG_READONLY_COMPAT) ? spa->spa_feat_for_write_obj : spa->spa_feat_for_read_obj; int i; ASSERT(0 != zapobj); ASSERT(zfeature_is_valid_guid(feature->fi_guid)); ASSERT3U(spa_version(spa), >=, SPA_VERSION_FEATURES); /* * If the feature is already enabled, ignore the request. */ if (zap_contains(spa->spa_meta_objset, zapobj, feature->fi_guid) == 0) return; for (i = 0; feature->fi_depends[i] != SPA_FEATURE_NONE; i++) spa_feature_enable(spa, feature->fi_depends[i], tx); VERIFY0(zap_update(spa->spa_meta_objset, spa->spa_feat_desc_obj, feature->fi_guid, 1, strlen(feature->fi_desc) + 1, feature->fi_desc, tx)); feature_sync(spa, feature, initial_refcount, tx); if (spa_feature_is_enabled(spa, SPA_FEATURE_ENABLED_TXG)) { uint64_t enabling_txg = dmu_tx_get_txg(tx); if (spa->spa_feat_enabled_txg_obj == 0ULL) { spa->spa_feat_enabled_txg_obj = zap_create_link(spa->spa_meta_objset, DMU_OTN_ZAP_METADATA, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_FEATURE_ENABLED_TXG, tx); } spa_feature_incr(spa, SPA_FEATURE_ENABLED_TXG, tx); VERIFY0(zap_add(spa->spa_meta_objset, spa->spa_feat_enabled_txg_obj, feature->fi_guid, sizeof (uint64_t), 1, &enabling_txg, tx)); } } /* * This function is non-static for zhack; it should otherwise not be used * outside this file. */ void feature_disable_sync(spa_t *spa, zfeature_info_t *feature, dmu_tx_t *tx) { uint64_t descobj = spa->spa_feat_desc_obj; uint64_t zapobj = feature->fi_can_readonly ? spa->spa_feat_for_write_obj : spa->spa_feat_for_read_obj; ASSERT(0 != zapobj); ASSERT(zfeature_is_valid_guid(feature->fi_guid)); ASSERT3U(spa_version(spa), >=, SPA_VERSION_FEATURES); if (zap_contains(spa->spa_meta_objset, descobj, feature->fi_guid) == 0) VERIFY0(zap_remove(spa->spa_meta_objset, descobj, feature->fi_guid, tx)); if (zap_contains(spa->spa_meta_objset, zapobj, feature->fi_guid) == 0) VERIFY0(zap_remove(spa->spa_meta_objset, zapobj, feature->fi_guid, tx)); spa_deactivate_mos_feature(spa, feature->fi_guid); if (spa_feature_is_enabled(spa, SPA_FEATURE_ENABLED_TXG)) { uint64_t txgobj = spa->spa_feat_enabled_txg_obj; if (txgobj && (zap_contains(spa->spa_meta_objset, txgobj, feature->fi_guid) == 0)) { spa_feature_decr(spa, SPA_FEATURE_ENABLED_TXG, tx); VERIFY0(zap_remove(spa->spa_meta_objset, txgobj, feature->fi_guid, tx)); } } } static void feature_do_action(spa_t *spa, spa_feature_t fid, feature_action_t action, dmu_tx_t *tx) { uint64_t refcount = 0; zfeature_info_t *feature = &spa_feature_table[fid]; ASSERTV(uint64_t zapobj = (feature->fi_flags & ZFEATURE_FLAG_READONLY_COMPAT) ? spa->spa_feat_for_write_obj : spa->spa_feat_for_read_obj); ASSERT(VALID_FEATURE_FID(fid)); ASSERT(0 != zapobj); ASSERT(zfeature_is_valid_guid(feature->fi_guid)); ASSERT(dmu_tx_is_syncing(tx)); ASSERT3U(spa_version(spa), >=, SPA_VERSION_FEATURES); VERIFY3U(feature_get_refcount(spa, feature, &refcount), !=, ENOTSUP); switch (action) { case FEATURE_ACTION_INCR: VERIFY3U(refcount, !=, UINT64_MAX); refcount++; break; case FEATURE_ACTION_DECR: VERIFY3U(refcount, !=, 0); refcount--; break; default: ASSERT(0); break; } feature_sync(spa, feature, refcount, tx); } void spa_feature_create_zap_objects(spa_t *spa, dmu_tx_t *tx) { /* * We create feature flags ZAP objects in two instances: during pool * creation and during pool upgrade. */ ASSERT(dsl_pool_sync_context(spa_get_dsl(spa)) || (!spa->spa_sync_on && tx->tx_txg == TXG_INITIAL)); spa->spa_feat_for_read_obj = zap_create_link(spa->spa_meta_objset, DMU_OTN_ZAP_METADATA, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_FEATURES_FOR_READ, tx); spa->spa_feat_for_write_obj = zap_create_link(spa->spa_meta_objset, DMU_OTN_ZAP_METADATA, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_FEATURES_FOR_WRITE, tx); spa->spa_feat_desc_obj = zap_create_link(spa->spa_meta_objset, DMU_OTN_ZAP_METADATA, DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_FEATURE_DESCRIPTIONS, tx); } /* * Enable any required dependencies, then enable the requested feature. */ void spa_feature_enable(spa_t *spa, spa_feature_t fid, dmu_tx_t *tx) { ASSERT3U(spa_version(spa), >=, SPA_VERSION_FEATURES); ASSERT(VALID_FEATURE_FID(fid)); feature_enable_sync(spa, &spa_feature_table[fid], tx); } void spa_feature_incr(spa_t *spa, spa_feature_t fid, dmu_tx_t *tx) { feature_do_action(spa, fid, FEATURE_ACTION_INCR, tx); } void spa_feature_decr(spa_t *spa, spa_feature_t fid, dmu_tx_t *tx) { feature_do_action(spa, fid, FEATURE_ACTION_DECR, tx); } boolean_t spa_feature_is_enabled(spa_t *spa, spa_feature_t fid) { int err; uint64_t refcount = 0; ASSERT(VALID_FEATURE_FID(fid)); if (spa_version(spa) < SPA_VERSION_FEATURES) return (B_FALSE); err = feature_get_refcount(spa, &spa_feature_table[fid], &refcount); ASSERT(err == 0 || err == ENOTSUP); return (err == 0); } boolean_t spa_feature_is_active(spa_t *spa, spa_feature_t fid) { int err; uint64_t refcount = 0; ASSERT(VALID_FEATURE_FID(fid)); if (spa_version(spa) < SPA_VERSION_FEATURES) return (B_FALSE); err = feature_get_refcount(spa, &spa_feature_table[fid], &refcount); ASSERT(err == 0 || err == ENOTSUP); return (err == 0 && refcount > 0); } /* * For the feature specified by fid (which must depend on * SPA_FEATURE_ENABLED_TXG), return the TXG at which it was enabled in the * OUT txg argument. * * Returns B_TRUE if the feature is enabled, in which case txg will be filled * with the transaction group in which the specified feature was enabled. * Returns B_FALSE otherwise (i.e. if the feature is not enabled). */ boolean_t spa_feature_enabled_txg(spa_t *spa, spa_feature_t fid, uint64_t *txg) { int err; ASSERT(VALID_FEATURE_FID(fid)); if (spa_version(spa) < SPA_VERSION_FEATURES) return (B_FALSE); err = feature_get_enabled_txg(spa, &spa_feature_table[fid], txg); ASSERT(err == 0 || err == ENOTSUP); return (err == 0); }