/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2013 by Delphix. All rights reserved. * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * ZFS System attributes: * * A generic mechanism to allow for arbitrary attributes * to be stored in a dnode. The data will be stored in the bonus buffer of * the dnode and if necessary a special "spill" block will be used to handle * overflow situations. The spill block will be sized to fit the data * from 512 - 128K. When a spill block is used the BP (blkptr_t) for the * spill block is stored at the end of the current bonus buffer. Any * attributes that would be in the way of the blkptr_t will be relocated * into the spill block. * * Attribute registration: * * Stored persistently on a per dataset basis * a mapping between attribute "string" names and their actual attribute * numeric values, length, and byteswap function. The names are only used * during registration. All attributes are known by their unique attribute * id value. If an attribute can have a variable size then the value * 0 will be used to indicate this. * * Attribute Layout: * * Attribute layouts are a way to compactly store multiple attributes, but * without taking the overhead associated with managing each attribute * individually. Since you will typically have the same set of attributes * stored in the same order a single table will be used to represent that * layout. The ZPL for example will usually have only about 10 different * layouts (regular files, device files, symlinks, * regular files + scanstamp, files/dir with extended attributes, and then * you have the possibility of all of those minus ACL, because it would * be kicked out into the spill block) * * Layouts are simply an array of the attributes and their * ordering i.e. [0, 1, 4, 5, 2] * * Each distinct layout is given a unique layout number and that is whats * stored in the header at the beginning of the SA data buffer. * * A layout only covers a single dbuf (bonus or spill). If a set of * attributes is split up between the bonus buffer and a spill buffer then * two different layouts will be used. This allows us to byteswap the * spill without looking at the bonus buffer and keeps the on disk format of * the bonus and spill buffer the same. * * Adding a single attribute will cause the entire set of attributes to * be rewritten and could result in a new layout number being constructed * as part of the rewrite if no such layout exists for the new set of * attribues. The new attribute will be appended to the end of the already * existing attributes. * * Both the attribute registration and attribute layout information are * stored in normal ZAP attributes. Their should be a small number of * known layouts and the set of attributes is assumed to typically be quite * small. * * The registered attributes and layout "table" information is maintained * in core and a special "sa_os_t" is attached to the objset_t. * * A special interface is provided to allow for quickly applying * a large set of attributes at once. sa_replace_all_by_template() is * used to set an array of attributes. This is used by the ZPL when * creating a brand new file. The template that is passed into the function * specifies the attribute, size for variable length attributes, location of * data and special "data locator" function if the data isn't in a contiguous * location. * * Byteswap implications: * * Since the SA attributes are not entirely self describing we can't do * the normal byteswap processing. The special ZAP layout attribute and * attribute registration attributes define the byteswap function and the * size of the attributes, unless it is variable sized. * The normal ZFS byteswapping infrastructure assumes you don't need * to read any objects in order to do the necessary byteswapping. Whereas * SA attributes can only be properly byteswapped if the dataset is opened * and the layout/attribute ZAP attributes are available. Because of this * the SA attributes will be byteswapped when they are first accessed by * the SA code that will read the SA data. */ typedef void (sa_iterfunc_t)(void *hdr, void *addr, sa_attr_type_t, uint16_t length, int length_idx, boolean_t, void *userp); static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype); static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab); static void *sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data); static void sa_idx_tab_rele(objset_t *os, void *arg); static void sa_copy_data(sa_data_locator_t *func, void *start, void *target, int buflen); static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, sa_data_op_t action, sa_data_locator_t *locator, void *datastart, uint16_t buflen, dmu_tx_t *tx); arc_byteswap_func_t sa_bswap_table[] = { byteswap_uint64_array, byteswap_uint32_array, byteswap_uint16_array, byteswap_uint8_array, zfs_acl_byteswap, }; #define SA_COPY_DATA(f, s, t, l) \ { \ if (f == NULL) { \ if (l == 8) { \ *(uint64_t *)t = *(uint64_t *)s; \ } else if (l == 16) { \ *(uint64_t *)t = *(uint64_t *)s; \ *(uint64_t *)((uintptr_t)t + 8) = \ *(uint64_t *)((uintptr_t)s + 8); \ } else { \ bcopy(s, t, l); \ } \ } else \ sa_copy_data(f, s, t, l); \ } /* * This table is fixed and cannot be changed. Its purpose is to * allow the SA code to work with both old/new ZPL file systems. * It contains the list of legacy attributes. These attributes aren't * stored in the "attribute" registry zap objects, since older ZPL file systems * won't have the registry. Only objsets of type ZFS_TYPE_FILESYSTEM will * use this static table. */ sa_attr_reg_t sa_legacy_attrs[] = { {"ZPL_ATIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 0}, {"ZPL_MTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 1}, {"ZPL_CTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 2}, {"ZPL_CRTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 3}, {"ZPL_GEN", sizeof (uint64_t), SA_UINT64_ARRAY, 4}, {"ZPL_MODE", sizeof (uint64_t), SA_UINT64_ARRAY, 5}, {"ZPL_SIZE", sizeof (uint64_t), SA_UINT64_ARRAY, 6}, {"ZPL_PARENT", sizeof (uint64_t), SA_UINT64_ARRAY, 7}, {"ZPL_LINKS", sizeof (uint64_t), SA_UINT64_ARRAY, 8}, {"ZPL_XATTR", sizeof (uint64_t), SA_UINT64_ARRAY, 9}, {"ZPL_RDEV", sizeof (uint64_t), SA_UINT64_ARRAY, 10}, {"ZPL_FLAGS", sizeof (uint64_t), SA_UINT64_ARRAY, 11}, {"ZPL_UID", sizeof (uint64_t), SA_UINT64_ARRAY, 12}, {"ZPL_GID", sizeof (uint64_t), SA_UINT64_ARRAY, 13}, {"ZPL_PAD", sizeof (uint64_t) * 4, SA_UINT64_ARRAY, 14}, {"ZPL_ZNODE_ACL", 88, SA_UINT8_ARRAY, 15}, }; /* * This is only used for objects of type DMU_OT_ZNODE */ sa_attr_type_t sa_legacy_zpl_layout[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 }; /* * Special dummy layout used for buffers with no attributes. */ sa_attr_type_t sa_dummy_zpl_layout[] = { 0 }; static int sa_legacy_attr_count = ARRAY_SIZE(sa_legacy_attrs); static kmem_cache_t *sa_cache = NULL; /*ARGSUSED*/ static int sa_cache_constructor(void *buf, void *unused, int kmflag) { sa_handle_t *hdl = buf; mutex_init(&hdl->sa_lock, NULL, MUTEX_DEFAULT, NULL); return (0); } /*ARGSUSED*/ static void sa_cache_destructor(void *buf, void *unused) { sa_handle_t *hdl = buf; mutex_destroy(&hdl->sa_lock); } void sa_cache_init(void) { sa_cache = kmem_cache_create("sa_cache", sizeof (sa_handle_t), 0, sa_cache_constructor, sa_cache_destructor, NULL, NULL, NULL, 0); } void sa_cache_fini(void) { if (sa_cache) kmem_cache_destroy(sa_cache); } static int layout_num_compare(const void *arg1, const void *arg2) { const sa_lot_t *node1 = (const sa_lot_t *)arg1; const sa_lot_t *node2 = (const sa_lot_t *)arg2; return (AVL_CMP(node1->lot_num, node2->lot_num)); } static int layout_hash_compare(const void *arg1, const void *arg2) { const sa_lot_t *node1 = (const sa_lot_t *)arg1; const sa_lot_t *node2 = (const sa_lot_t *)arg2; int cmp = AVL_CMP(node1->lot_hash, node2->lot_hash); if (likely(cmp)) return (cmp); return (AVL_CMP(node1->lot_instance, node2->lot_instance)); } boolean_t sa_layout_equal(sa_lot_t *tbf, sa_attr_type_t *attrs, int count) { int i; if (count != tbf->lot_attr_count) return (1); for (i = 0; i != count; i++) { if (attrs[i] != tbf->lot_attrs[i]) return (1); } return (0); } #define SA_ATTR_HASH(attr) (zfs_crc64_table[(-1ULL ^ attr) & 0xFF]) static uint64_t sa_layout_info_hash(sa_attr_type_t *attrs, int attr_count) { int i; uint64_t crc = -1ULL; for (i = 0; i != attr_count; i++) crc ^= SA_ATTR_HASH(attrs[i]); return (crc); } static int sa_get_spill(sa_handle_t *hdl) { int rc; if (hdl->sa_spill == NULL) { if ((rc = dmu_spill_hold_existing(hdl->sa_bonus, NULL, &hdl->sa_spill)) == 0) VERIFY(0 == sa_build_index(hdl, SA_SPILL)); } else { rc = 0; } return (rc); } /* * Main attribute lookup/update function * returns 0 for success or non zero for failures * * Operates on bulk array, first failure will abort further processing */ int sa_attr_op(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, sa_data_op_t data_op, dmu_tx_t *tx) { sa_os_t *sa = hdl->sa_os->os_sa; int i; int error = 0; sa_buf_type_t buftypes; buftypes = 0; ASSERT(count > 0); for (i = 0; i != count; i++) { ASSERT(bulk[i].sa_attr <= hdl->sa_os->os_sa->sa_num_attrs); bulk[i].sa_addr = NULL; /* First check the bonus buffer */ if (hdl->sa_bonus_tab && TOC_ATTR_PRESENT( hdl->sa_bonus_tab->sa_idx_tab[bulk[i].sa_attr])) { SA_ATTR_INFO(sa, hdl->sa_bonus_tab, SA_GET_HDR(hdl, SA_BONUS), bulk[i].sa_attr, bulk[i], SA_BONUS, hdl); if (tx && !(buftypes & SA_BONUS)) { dmu_buf_will_dirty(hdl->sa_bonus, tx); buftypes |= SA_BONUS; } } if (bulk[i].sa_addr == NULL && ((error = sa_get_spill(hdl)) == 0)) { if (TOC_ATTR_PRESENT( hdl->sa_spill_tab->sa_idx_tab[bulk[i].sa_attr])) { SA_ATTR_INFO(sa, hdl->sa_spill_tab, SA_GET_HDR(hdl, SA_SPILL), bulk[i].sa_attr, bulk[i], SA_SPILL, hdl); if (tx && !(buftypes & SA_SPILL) && bulk[i].sa_size == bulk[i].sa_length) { dmu_buf_will_dirty(hdl->sa_spill, tx); buftypes |= SA_SPILL; } } } if (error && error != ENOENT) { return ((error == ECKSUM) ? EIO : error); } switch (data_op) { case SA_LOOKUP: if (bulk[i].sa_addr == NULL) return (SET_ERROR(ENOENT)); if (bulk[i].sa_data) { SA_COPY_DATA(bulk[i].sa_data_func, bulk[i].sa_addr, bulk[i].sa_data, bulk[i].sa_size); } continue; case SA_UPDATE: /* existing rewrite of attr */ if (bulk[i].sa_addr && bulk[i].sa_size == bulk[i].sa_length) { SA_COPY_DATA(bulk[i].sa_data_func, bulk[i].sa_data, bulk[i].sa_addr, bulk[i].sa_length); continue; } else if (bulk[i].sa_addr) { /* attr size change */ error = sa_modify_attrs(hdl, bulk[i].sa_attr, SA_REPLACE, bulk[i].sa_data_func, bulk[i].sa_data, bulk[i].sa_length, tx); } else { /* adding new attribute */ error = sa_modify_attrs(hdl, bulk[i].sa_attr, SA_ADD, bulk[i].sa_data_func, bulk[i].sa_data, bulk[i].sa_length, tx); } if (error) return (error); break; default: break; } } return (error); } static sa_lot_t * sa_add_layout_entry(objset_t *os, sa_attr_type_t *attrs, int attr_count, uint64_t lot_num, uint64_t hash, boolean_t zapadd, dmu_tx_t *tx) { sa_os_t *sa = os->os_sa; sa_lot_t *tb, *findtb; int i; avl_index_t loc; ASSERT(MUTEX_HELD(&sa->sa_lock)); tb = kmem_zalloc(sizeof (sa_lot_t), KM_SLEEP); tb->lot_attr_count = attr_count; tb->lot_attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, KM_SLEEP); bcopy(attrs, tb->lot_attrs, sizeof (sa_attr_type_t) * attr_count); tb->lot_num = lot_num; tb->lot_hash = hash; tb->lot_instance = 0; if (zapadd) { char attr_name[8]; if (sa->sa_layout_attr_obj == 0) { sa->sa_layout_attr_obj = zap_create_link(os, DMU_OT_SA_ATTR_LAYOUTS, sa->sa_master_obj, SA_LAYOUTS, tx); } (void) snprintf(attr_name, sizeof (attr_name), "%d", (int)lot_num); VERIFY(0 == zap_update(os, os->os_sa->sa_layout_attr_obj, attr_name, 2, attr_count, attrs, tx)); } list_create(&tb->lot_idx_tab, sizeof (sa_idx_tab_t), offsetof(sa_idx_tab_t, sa_next)); for (i = 0; i != attr_count; i++) { if (sa->sa_attr_table[tb->lot_attrs[i]].sa_length == 0) tb->lot_var_sizes++; } avl_add(&sa->sa_layout_num_tree, tb); /* verify we don't have a hash collision */ if ((findtb = avl_find(&sa->sa_layout_hash_tree, tb, &loc)) != NULL) { for (; findtb && findtb->lot_hash == hash; findtb = AVL_NEXT(&sa->sa_layout_hash_tree, findtb)) { if (findtb->lot_instance != tb->lot_instance) break; tb->lot_instance++; } } avl_add(&sa->sa_layout_hash_tree, tb); return (tb); } static void sa_find_layout(objset_t *os, uint64_t hash, sa_attr_type_t *attrs, int count, dmu_tx_t *tx, sa_lot_t **lot) { sa_lot_t *tb, tbsearch; avl_index_t loc; sa_os_t *sa = os->os_sa; boolean_t found = B_FALSE; mutex_enter(&sa->sa_lock); tbsearch.lot_hash = hash; tbsearch.lot_instance = 0; tb = avl_find(&sa->sa_layout_hash_tree, &tbsearch, &loc); if (tb) { for (; tb && tb->lot_hash == hash; tb = AVL_NEXT(&sa->sa_layout_hash_tree, tb)) { if (sa_layout_equal(tb, attrs, count) == 0) { found = B_TRUE; break; } } } if (!found) { tb = sa_add_layout_entry(os, attrs, count, avl_numnodes(&sa->sa_layout_num_tree), hash, B_TRUE, tx); } mutex_exit(&sa->sa_lock); *lot = tb; } static int sa_resize_spill(sa_handle_t *hdl, uint32_t size, dmu_tx_t *tx) { int error; uint32_t blocksize; if (size == 0) { blocksize = SPA_MINBLOCKSIZE; } else if (size > SPA_OLD_MAXBLOCKSIZE) { ASSERT(0); return (SET_ERROR(EFBIG)); } else { blocksize = P2ROUNDUP_TYPED(size, SPA_MINBLOCKSIZE, uint32_t); } error = dbuf_spill_set_blksz(hdl->sa_spill, blocksize, tx); ASSERT(error == 0); return (error); } static void sa_copy_data(sa_data_locator_t *func, void *datastart, void *target, int buflen) { if (func == NULL) { bcopy(datastart, target, buflen); } else { boolean_t start; int bytes; void *dataptr; void *saptr = target; uint32_t length; start = B_TRUE; bytes = 0; while (bytes < buflen) { func(&dataptr, &length, buflen, start, datastart); bcopy(dataptr, saptr, length); saptr = (void *)((caddr_t)saptr + length); bytes += length; start = B_FALSE; } } } /* * Determine several different values pertaining to system attribute * buffers. * * Return the size of the sa_hdr_phys_t header for the buffer. Each * variable length attribute except the first contributes two bytes to * the header size, which is then rounded up to an 8-byte boundary. * * The following output parameters are also computed. * * index - The index of the first attribute in attr_desc that will * spill over. Only valid if will_spill is set. * * total - The total number of bytes of all system attributes described * in attr_desc. * * will_spill - Set when spilling is necessary. It is only set when * the buftype is SA_BONUS. */ static int sa_find_sizes(sa_os_t *sa, sa_bulk_attr_t *attr_desc, int attr_count, dmu_buf_t *db, sa_buf_type_t buftype, int full_space, int *index, int *total, boolean_t *will_spill) { int var_size_count = 0; int i; int hdrsize; int extra_hdrsize; if (buftype == SA_BONUS && sa->sa_force_spill) { *total = 0; *index = 0; *will_spill = B_TRUE; return (0); } *index = -1; *total = 0; *will_spill = B_FALSE; extra_hdrsize = 0; hdrsize = (SA_BONUSTYPE_FROM_DB(db) == DMU_OT_ZNODE) ? 0 : sizeof (sa_hdr_phys_t); ASSERT(IS_P2ALIGNED(full_space, 8)); for (i = 0; i != attr_count; i++) { boolean_t is_var_sz, might_spill_here; int tmp_hdrsize; *total = P2ROUNDUP(*total, 8); *total += attr_desc[i].sa_length; if (*will_spill) continue; is_var_sz = (SA_REGISTERED_LEN(sa, attr_desc[i].sa_attr) == 0); if (is_var_sz) var_size_count++; /* * Calculate what the SA header size would be if this * attribute doesn't spill. */ tmp_hdrsize = hdrsize + ((is_var_sz && var_size_count > 1) ? sizeof (uint16_t) : 0); /* * Check whether this attribute spans into the space * that would be used by the spill block pointer should * a spill block be needed. */ might_spill_here = buftype == SA_BONUS && *index == -1 && (*total + P2ROUNDUP(tmp_hdrsize, 8)) > (full_space - sizeof (blkptr_t)); if (is_var_sz && var_size_count > 1) { if (buftype == SA_SPILL || tmp_hdrsize + *total < full_space) { /* * Record the extra header size in case this * increase needs to be reversed due to * spill-over. */ hdrsize = tmp_hdrsize; if (*index != -1 || might_spill_here) extra_hdrsize += sizeof (uint16_t); } else { ASSERT(buftype == SA_BONUS); if (*index == -1) *index = i; *will_spill = B_TRUE; continue; } } /* * Store index of where spill *could* occur. Then * continue to count the remaining attribute sizes. The * sum is used later for sizing bonus and spill buffer. */ if (might_spill_here) *index = i; if ((*total + P2ROUNDUP(hdrsize, 8)) > full_space && buftype == SA_BONUS) *will_spill = B_TRUE; } if (*will_spill) hdrsize -= extra_hdrsize; hdrsize = P2ROUNDUP(hdrsize, 8); return (hdrsize); } #define BUF_SPACE_NEEDED(total, header) (total + header) /* * Find layout that corresponds to ordering of attributes * If not found a new layout number is created and added to * persistent layout tables. */ static int sa_build_layouts(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count, dmu_tx_t *tx) { sa_os_t *sa = hdl->sa_os->os_sa; uint64_t hash; sa_buf_type_t buftype; sa_hdr_phys_t *sahdr; void *data_start; sa_attr_type_t *attrs, *attrs_start; int i, lot_count; int dnodesize; int spill_idx; int hdrsize; int spillhdrsize = 0; int used; dmu_object_type_t bonustype; sa_lot_t *lot; int len_idx; int spill_used; int bonuslen; boolean_t spilling; dmu_buf_will_dirty(hdl->sa_bonus, tx); bonustype = SA_BONUSTYPE_FROM_DB(hdl->sa_bonus); dmu_object_dnsize_from_db(hdl->sa_bonus, &dnodesize); bonuslen = DN_BONUS_SIZE(dnodesize); /* first determine bonus header size and sum of all attributes */ hdrsize = sa_find_sizes(sa, attr_desc, attr_count, hdl->sa_bonus, SA_BONUS, bonuslen, &spill_idx, &used, &spilling); if (used > SPA_OLD_MAXBLOCKSIZE) return (SET_ERROR(EFBIG)); VERIFY0(dmu_set_bonus(hdl->sa_bonus, spilling ? MIN(bonuslen - sizeof (blkptr_t), used + hdrsize) : used + hdrsize, tx)); ASSERT((bonustype == DMU_OT_ZNODE && spilling == 0) || bonustype == DMU_OT_SA); /* setup and size spill buffer when needed */ if (spilling) { boolean_t dummy; if (hdl->sa_spill == NULL) { VERIFY(dmu_spill_hold_by_bonus(hdl->sa_bonus, NULL, &hdl->sa_spill) == 0); } dmu_buf_will_dirty(hdl->sa_spill, tx); spillhdrsize = sa_find_sizes(sa, &attr_desc[spill_idx], attr_count - spill_idx, hdl->sa_spill, SA_SPILL, hdl->sa_spill->db_size, &i, &spill_used, &dummy); if (spill_used > SPA_OLD_MAXBLOCKSIZE) return (SET_ERROR(EFBIG)); if (BUF_SPACE_NEEDED(spill_used, spillhdrsize) > hdl->sa_spill->db_size) VERIFY(0 == sa_resize_spill(hdl, BUF_SPACE_NEEDED(spill_used, spillhdrsize), tx)); } /* setup starting pointers to lay down data */ data_start = (void *)((uintptr_t)hdl->sa_bonus->db_data + hdrsize); sahdr = (sa_hdr_phys_t *)hdl->sa_bonus->db_data; buftype = SA_BONUS; attrs_start = attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, KM_SLEEP); lot_count = 0; for (i = 0, len_idx = 0, hash = -1ULL; i != attr_count; i++) { uint16_t length; ASSERT(IS_P2ALIGNED(data_start, 8)); attrs[i] = attr_desc[i].sa_attr; length = SA_REGISTERED_LEN(sa, attrs[i]); if (length == 0) length = attr_desc[i].sa_length; if (spilling && i == spill_idx) { /* switch to spill buffer */ VERIFY(bonustype == DMU_OT_SA); if (buftype == SA_BONUS && !sa->sa_force_spill) { sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot); SA_SET_HDR(sahdr, lot->lot_num, hdrsize); } buftype = SA_SPILL; hash = -1ULL; len_idx = 0; sahdr = (sa_hdr_phys_t *)hdl->sa_spill->db_data; sahdr->sa_magic = SA_MAGIC; data_start = (void *)((uintptr_t)sahdr + spillhdrsize); attrs_start = &attrs[i]; lot_count = 0; } hash ^= SA_ATTR_HASH(attrs[i]); attr_desc[i].sa_addr = data_start; attr_desc[i].sa_size = length; SA_COPY_DATA(attr_desc[i].sa_data_func, attr_desc[i].sa_data, data_start, length); if (sa->sa_attr_table[attrs[i]].sa_length == 0) { sahdr->sa_lengths[len_idx++] = length; } data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + length), 8); lot_count++; } sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot); /* * Verify that old znodes always have layout number 0. * Must be DMU_OT_SA for arbitrary layouts */ VERIFY((bonustype == DMU_OT_ZNODE && lot->lot_num == 0) || (bonustype == DMU_OT_SA && lot->lot_num > 1)); if (bonustype == DMU_OT_SA) { SA_SET_HDR(sahdr, lot->lot_num, buftype == SA_BONUS ? hdrsize : spillhdrsize); } kmem_free(attrs, sizeof (sa_attr_type_t) * attr_count); if (hdl->sa_bonus_tab) { sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); hdl->sa_bonus_tab = NULL; } if (!sa->sa_force_spill) VERIFY(0 == sa_build_index(hdl, SA_BONUS)); if (hdl->sa_spill) { sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); if (!spilling) { /* * remove spill block that is no longer needed. */ dmu_buf_rele(hdl->sa_spill, NULL); hdl->sa_spill = NULL; hdl->sa_spill_tab = NULL; VERIFY(0 == dmu_rm_spill(hdl->sa_os, sa_handle_object(hdl), tx)); } else { VERIFY(0 == sa_build_index(hdl, SA_SPILL)); } } return (0); } static void sa_free_attr_table(sa_os_t *sa) { int i; if (sa->sa_attr_table == NULL) return; for (i = 0; i != sa->sa_num_attrs; i++) { if (sa->sa_attr_table[i].sa_name) kmem_free(sa->sa_attr_table[i].sa_name, strlen(sa->sa_attr_table[i].sa_name) + 1); } kmem_free(sa->sa_attr_table, sizeof (sa_attr_table_t) * sa->sa_num_attrs); sa->sa_attr_table = NULL; } static int sa_attr_table_setup(objset_t *os, sa_attr_reg_t *reg_attrs, int count) { sa_os_t *sa = os->os_sa; uint64_t sa_attr_count = 0; uint64_t sa_reg_count = 0; int error = 0; uint64_t attr_value; sa_attr_table_t *tb; zap_cursor_t zc; zap_attribute_t za; int registered_count = 0; int i; dmu_objset_type_t ostype = dmu_objset_type(os); sa->sa_user_table = kmem_zalloc(count * sizeof (sa_attr_type_t), KM_SLEEP); sa->sa_user_table_sz = count * sizeof (sa_attr_type_t); if (sa->sa_reg_attr_obj != 0) { error = zap_count(os, sa->sa_reg_attr_obj, &sa_attr_count); /* * Make sure we retrieved a count and that it isn't zero */ if (error || (error == 0 && sa_attr_count == 0)) { if (error == 0) error = SET_ERROR(EINVAL); goto bail; } sa_reg_count = sa_attr_count; } if (ostype == DMU_OST_ZFS && sa_attr_count == 0) sa_attr_count += sa_legacy_attr_count; /* Allocate attribute numbers for attributes that aren't registered */ for (i = 0; i != count; i++) { boolean_t found = B_FALSE; int j; if (ostype == DMU_OST_ZFS) { for (j = 0; j != sa_legacy_attr_count; j++) { if (strcmp(reg_attrs[i].sa_name, sa_legacy_attrs[j].sa_name) == 0) { sa->sa_user_table[i] = sa_legacy_attrs[j].sa_attr; found = B_TRUE; } } } if (found) continue; if (sa->sa_reg_attr_obj) error = zap_lookup(os, sa->sa_reg_attr_obj, reg_attrs[i].sa_name, 8, 1, &attr_value); else error = SET_ERROR(ENOENT); switch (error) { case ENOENT: sa->sa_user_table[i] = (sa_attr_type_t)sa_attr_count; sa_attr_count++; break; case 0: sa->sa_user_table[i] = ATTR_NUM(attr_value); break; default: goto bail; } } sa->sa_num_attrs = sa_attr_count; tb = sa->sa_attr_table = kmem_zalloc(sizeof (sa_attr_table_t) * sa_attr_count, KM_SLEEP); /* * Attribute table is constructed from requested attribute list, * previously foreign registered attributes, and also the legacy * ZPL set of attributes. */ if (sa->sa_reg_attr_obj) { for (zap_cursor_init(&zc, os, sa->sa_reg_attr_obj); (error = zap_cursor_retrieve(&zc, &za)) == 0; zap_cursor_advance(&zc)) { uint64_t value; value = za.za_first_integer; registered_count++; tb[ATTR_NUM(value)].sa_attr = ATTR_NUM(value); tb[ATTR_NUM(value)].sa_length = ATTR_LENGTH(value); tb[ATTR_NUM(value)].sa_byteswap = ATTR_BSWAP(value); tb[ATTR_NUM(value)].sa_registered = B_TRUE; if (tb[ATTR_NUM(value)].sa_name) { continue; } tb[ATTR_NUM(value)].sa_name = kmem_zalloc(strlen(za.za_name) +1, KM_SLEEP); (void) strlcpy(tb[ATTR_NUM(value)].sa_name, za.za_name, strlen(za.za_name) +1); } zap_cursor_fini(&zc); /* * Make sure we processed the correct number of registered * attributes */ if (registered_count != sa_reg_count) { ASSERT(error != 0); goto bail; } } if (ostype == DMU_OST_ZFS) { for (i = 0; i != sa_legacy_attr_count; i++) { if (tb[i].sa_name) continue; tb[i].sa_attr = sa_legacy_attrs[i].sa_attr; tb[i].sa_length = sa_legacy_attrs[i].sa_length; tb[i].sa_byteswap = sa_legacy_attrs[i].sa_byteswap; tb[i].sa_registered = B_FALSE; tb[i].sa_name = kmem_zalloc(strlen(sa_legacy_attrs[i].sa_name) +1, KM_SLEEP); (void) strlcpy(tb[i].sa_name, sa_legacy_attrs[i].sa_name, strlen(sa_legacy_attrs[i].sa_name) + 1); } } for (i = 0; i != count; i++) { sa_attr_type_t attr_id; attr_id = sa->sa_user_table[i]; if (tb[attr_id].sa_name) continue; tb[attr_id].sa_length = reg_attrs[i].sa_length; tb[attr_id].sa_byteswap = reg_attrs[i].sa_byteswap; tb[attr_id].sa_attr = attr_id; tb[attr_id].sa_name = kmem_zalloc(strlen(reg_attrs[i].sa_name) + 1, KM_SLEEP); (void) strlcpy(tb[attr_id].sa_name, reg_attrs[i].sa_name, strlen(reg_attrs[i].sa_name) + 1); } sa->sa_need_attr_registration = (sa_attr_count != registered_count); return (0); bail: kmem_free(sa->sa_user_table, count * sizeof (sa_attr_type_t)); sa->sa_user_table = NULL; sa_free_attr_table(sa); return ((error != 0) ? error : EINVAL); } int sa_setup(objset_t *os, uint64_t sa_obj, sa_attr_reg_t *reg_attrs, int count, sa_attr_type_t **user_table) { zap_cursor_t zc; zap_attribute_t za; sa_os_t *sa; dmu_objset_type_t ostype = dmu_objset_type(os); sa_attr_type_t *tb; int error; mutex_enter(&os->os_user_ptr_lock); if (os->os_sa) { mutex_enter(&os->os_sa->sa_lock); mutex_exit(&os->os_user_ptr_lock); tb = os->os_sa->sa_user_table; mutex_exit(&os->os_sa->sa_lock); *user_table = tb; return (0); } sa = kmem_zalloc(sizeof (sa_os_t), KM_SLEEP); mutex_init(&sa->sa_lock, NULL, MUTEX_DEFAULT, NULL); sa->sa_master_obj = sa_obj; os->os_sa = sa; mutex_enter(&sa->sa_lock); mutex_exit(&os->os_user_ptr_lock); avl_create(&sa->sa_layout_num_tree, layout_num_compare, sizeof (sa_lot_t), offsetof(sa_lot_t, lot_num_node)); avl_create(&sa->sa_layout_hash_tree, layout_hash_compare, sizeof (sa_lot_t), offsetof(sa_lot_t, lot_hash_node)); if (sa_obj) { error = zap_lookup(os, sa_obj, SA_LAYOUTS, 8, 1, &sa->sa_layout_attr_obj); if (error != 0 && error != ENOENT) goto fail; error = zap_lookup(os, sa_obj, SA_REGISTRY, 8, 1, &sa->sa_reg_attr_obj); if (error != 0 && error != ENOENT) goto fail; } if ((error = sa_attr_table_setup(os, reg_attrs, count)) != 0) goto fail; if (sa->sa_layout_attr_obj != 0) { uint64_t layout_count; error = zap_count(os, sa->sa_layout_attr_obj, &layout_count); /* * Layout number count should be > 0 */ if (error || (error == 0 && layout_count == 0)) { if (error == 0) error = SET_ERROR(EINVAL); goto fail; } for (zap_cursor_init(&zc, os, sa->sa_layout_attr_obj); (error = zap_cursor_retrieve(&zc, &za)) == 0; zap_cursor_advance(&zc)) { sa_attr_type_t *lot_attrs; uint64_t lot_num; lot_attrs = kmem_zalloc(sizeof (sa_attr_type_t) * za.za_num_integers, KM_SLEEP); if ((error = (zap_lookup(os, sa->sa_layout_attr_obj, za.za_name, 2, za.za_num_integers, lot_attrs))) != 0) { kmem_free(lot_attrs, sizeof (sa_attr_type_t) * za.za_num_integers); break; } VERIFY(ddi_strtoull(za.za_name, NULL, 10, (unsigned long long *)&lot_num) == 0); (void) sa_add_layout_entry(os, lot_attrs, za.za_num_integers, lot_num, sa_layout_info_hash(lot_attrs, za.za_num_integers), B_FALSE, NULL); kmem_free(lot_attrs, sizeof (sa_attr_type_t) * za.za_num_integers); } zap_cursor_fini(&zc); /* * Make sure layout count matches number of entries added * to AVL tree */ if (avl_numnodes(&sa->sa_layout_num_tree) != layout_count) { ASSERT(error != 0); goto fail; } } /* Add special layout number for old ZNODES */ if (ostype == DMU_OST_ZFS) { (void) sa_add_layout_entry(os, sa_legacy_zpl_layout, sa_legacy_attr_count, 0, sa_layout_info_hash(sa_legacy_zpl_layout, sa_legacy_attr_count), B_FALSE, NULL); (void) sa_add_layout_entry(os, sa_dummy_zpl_layout, 0, 1, 0, B_FALSE, NULL); } *user_table = os->os_sa->sa_user_table; mutex_exit(&sa->sa_lock); return (0); fail: os->os_sa = NULL; sa_free_attr_table(sa); if (sa->sa_user_table) kmem_free(sa->sa_user_table, sa->sa_user_table_sz); mutex_exit(&sa->sa_lock); avl_destroy(&sa->sa_layout_hash_tree); avl_destroy(&sa->sa_layout_num_tree); mutex_destroy(&sa->sa_lock); kmem_free(sa, sizeof (sa_os_t)); return ((error == ECKSUM) ? EIO : error); } void sa_tear_down(objset_t *os) { sa_os_t *sa = os->os_sa; sa_lot_t *layout; void *cookie; kmem_free(sa->sa_user_table, sa->sa_user_table_sz); /* Free up attr table */ sa_free_attr_table(sa); cookie = NULL; while ((layout = avl_destroy_nodes(&sa->sa_layout_hash_tree, &cookie))) { sa_idx_tab_t *tab; while ((tab = list_head(&layout->lot_idx_tab))) { ASSERT(refcount_count(&tab->sa_refcount)); sa_idx_tab_rele(os, tab); } } cookie = NULL; while ((layout = avl_destroy_nodes(&sa->sa_layout_num_tree, &cookie))) { kmem_free(layout->lot_attrs, sizeof (sa_attr_type_t) * layout->lot_attr_count); kmem_free(layout, sizeof (sa_lot_t)); } avl_destroy(&sa->sa_layout_hash_tree); avl_destroy(&sa->sa_layout_num_tree); mutex_destroy(&sa->sa_lock); kmem_free(sa, sizeof (sa_os_t)); os->os_sa = NULL; } void sa_build_idx_tab(void *hdr, void *attr_addr, sa_attr_type_t attr, uint16_t length, int length_idx, boolean_t var_length, void *userp) { sa_idx_tab_t *idx_tab = userp; if (var_length) { ASSERT(idx_tab->sa_variable_lengths); idx_tab->sa_variable_lengths[length_idx] = length; } TOC_ATTR_ENCODE(idx_tab->sa_idx_tab[attr], length_idx, (uint32_t)((uintptr_t)attr_addr - (uintptr_t)hdr)); } static void sa_attr_iter(objset_t *os, sa_hdr_phys_t *hdr, dmu_object_type_t type, sa_iterfunc_t func, sa_lot_t *tab, void *userp) { void *data_start; sa_lot_t *tb = tab; sa_lot_t search; avl_index_t loc; sa_os_t *sa = os->os_sa; int i; uint16_t *length_start = NULL; uint8_t length_idx = 0; if (tab == NULL) { search.lot_num = SA_LAYOUT_NUM(hdr, type); tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); ASSERT(tb); } if (IS_SA_BONUSTYPE(type)) { data_start = (void *)P2ROUNDUP(((uintptr_t)hdr + offsetof(sa_hdr_phys_t, sa_lengths) + (sizeof (uint16_t) * tb->lot_var_sizes)), 8); length_start = hdr->sa_lengths; } else { data_start = hdr; } for (i = 0; i != tb->lot_attr_count; i++) { int attr_length, reg_length; uint8_t idx_len; reg_length = sa->sa_attr_table[tb->lot_attrs[i]].sa_length; if (reg_length) { attr_length = reg_length; idx_len = 0; } else { attr_length = length_start[length_idx]; idx_len = length_idx++; } func(hdr, data_start, tb->lot_attrs[i], attr_length, idx_len, reg_length == 0 ? B_TRUE : B_FALSE, userp); data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + attr_length), 8); } } /*ARGSUSED*/ void sa_byteswap_cb(void *hdr, void *attr_addr, sa_attr_type_t attr, uint16_t length, int length_idx, boolean_t variable_length, void *userp) { sa_handle_t *hdl = userp; sa_os_t *sa = hdl->sa_os->os_sa; sa_bswap_table[sa->sa_attr_table[attr].sa_byteswap](attr_addr, length); } void sa_byteswap(sa_handle_t *hdl, sa_buf_type_t buftype) { sa_hdr_phys_t *sa_hdr_phys = SA_GET_HDR(hdl, buftype); dmu_buf_impl_t *db; int num_lengths = 1; int i; ASSERTV(sa_os_t *sa = hdl->sa_os->os_sa); ASSERT(MUTEX_HELD(&sa->sa_lock)); if (sa_hdr_phys->sa_magic == SA_MAGIC) return; db = SA_GET_DB(hdl, buftype); if (buftype == SA_SPILL) { arc_release(db->db_buf, NULL); arc_buf_thaw(db->db_buf); } sa_hdr_phys->sa_magic = BSWAP_32(sa_hdr_phys->sa_magic); sa_hdr_phys->sa_layout_info = BSWAP_16(sa_hdr_phys->sa_layout_info); /* * Determine number of variable lengths in header * The standard 8 byte header has one for free and a * 16 byte header would have 4 + 1; */ if (SA_HDR_SIZE(sa_hdr_phys) > 8) num_lengths += (SA_HDR_SIZE(sa_hdr_phys) - 8) >> 1; for (i = 0; i != num_lengths; i++) sa_hdr_phys->sa_lengths[i] = BSWAP_16(sa_hdr_phys->sa_lengths[i]); sa_attr_iter(hdl->sa_os, sa_hdr_phys, DMU_OT_SA, sa_byteswap_cb, NULL, hdl); if (buftype == SA_SPILL) arc_buf_freeze(((dmu_buf_impl_t *)hdl->sa_spill)->db_buf); } static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype) { sa_hdr_phys_t *sa_hdr_phys; dmu_buf_impl_t *db = SA_GET_DB(hdl, buftype); dmu_object_type_t bonustype = SA_BONUSTYPE_FROM_DB(db); sa_os_t *sa = hdl->sa_os->os_sa; sa_idx_tab_t *idx_tab; sa_hdr_phys = SA_GET_HDR(hdl, buftype); mutex_enter(&sa->sa_lock); /* Do we need to byteswap? */ /* only check if not old znode */ if (IS_SA_BONUSTYPE(bonustype) && sa_hdr_phys->sa_magic != SA_MAGIC && sa_hdr_phys->sa_magic != 0) { VERIFY(BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC); sa_byteswap(hdl, buftype); } idx_tab = sa_find_idx_tab(hdl->sa_os, bonustype, sa_hdr_phys); if (buftype == SA_BONUS) hdl->sa_bonus_tab = idx_tab; else hdl->sa_spill_tab = idx_tab; mutex_exit(&sa->sa_lock); return (0); } /*ARGSUSED*/ static void sa_evict(void *dbu) { panic("evicting sa dbuf\n"); } static void sa_idx_tab_rele(objset_t *os, void *arg) { sa_os_t *sa = os->os_sa; sa_idx_tab_t *idx_tab = arg; if (idx_tab == NULL) return; mutex_enter(&sa->sa_lock); if (refcount_remove(&idx_tab->sa_refcount, NULL) == 0) { list_remove(&idx_tab->sa_layout->lot_idx_tab, idx_tab); if (idx_tab->sa_variable_lengths) kmem_free(idx_tab->sa_variable_lengths, sizeof (uint16_t) * idx_tab->sa_layout->lot_var_sizes); refcount_destroy(&idx_tab->sa_refcount); kmem_free(idx_tab->sa_idx_tab, sizeof (uint32_t) * sa->sa_num_attrs); kmem_free(idx_tab, sizeof (sa_idx_tab_t)); } mutex_exit(&sa->sa_lock); } static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab) { ASSERTV(sa_os_t *sa = os->os_sa); ASSERT(MUTEX_HELD(&sa->sa_lock)); (void) refcount_add(&idx_tab->sa_refcount, NULL); } void sa_spill_rele(sa_handle_t *hdl) { mutex_enter(&hdl->sa_lock); if (hdl->sa_spill) { sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); dmu_buf_rele(hdl->sa_spill, NULL); hdl->sa_spill = NULL; hdl->sa_spill_tab = NULL; } mutex_exit(&hdl->sa_lock); } void sa_handle_destroy(sa_handle_t *hdl) { dmu_buf_t *db = hdl->sa_bonus; mutex_enter(&hdl->sa_lock); (void) dmu_buf_remove_user(db, &hdl->sa_dbu); if (hdl->sa_bonus_tab) sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); if (hdl->sa_spill_tab) sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); dmu_buf_rele(hdl->sa_bonus, NULL); if (hdl->sa_spill) dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL); mutex_exit(&hdl->sa_lock); kmem_cache_free(sa_cache, hdl); } int sa_handle_get_from_db(objset_t *os, dmu_buf_t *db, void *userp, sa_handle_type_t hdl_type, sa_handle_t **handlepp) { int error = 0; sa_handle_t *handle = NULL; #ifdef ZFS_DEBUG dmu_object_info_t doi; dmu_object_info_from_db(db, &doi); ASSERT(doi.doi_bonus_type == DMU_OT_SA || doi.doi_bonus_type == DMU_OT_ZNODE); #endif /* find handle, if it exists */ /* if one doesn't exist then create a new one, and initialize it */ if (hdl_type == SA_HDL_SHARED) handle = dmu_buf_get_user(db); if (handle == NULL) { sa_handle_t *winner = NULL; handle = kmem_cache_alloc(sa_cache, KM_SLEEP); handle->sa_dbu.dbu_evict_func = NULL; handle->sa_userp = userp; handle->sa_bonus = db; handle->sa_os = os; handle->sa_spill = NULL; handle->sa_bonus_tab = NULL; handle->sa_spill_tab = NULL; error = sa_build_index(handle, SA_BONUS); if (hdl_type == SA_HDL_SHARED) { dmu_buf_init_user(&handle->sa_dbu, sa_evict, NULL); winner = dmu_buf_set_user_ie(db, &handle->sa_dbu); } if (winner != NULL) { kmem_cache_free(sa_cache, handle); handle = winner; } } *handlepp = handle; return (error); } int sa_handle_get(objset_t *objset, uint64_t objid, void *userp, sa_handle_type_t hdl_type, sa_handle_t **handlepp) { dmu_buf_t *db; int error; if ((error = dmu_bonus_hold(objset, objid, NULL, &db))) return (error); return (sa_handle_get_from_db(objset, db, userp, hdl_type, handlepp)); } int sa_buf_hold(objset_t *objset, uint64_t obj_num, void *tag, dmu_buf_t **db) { return (dmu_bonus_hold(objset, obj_num, tag, db)); } void sa_buf_rele(dmu_buf_t *db, void *tag) { dmu_buf_rele(db, tag); } int sa_lookup_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count) { ASSERT(hdl); ASSERT(MUTEX_HELD(&hdl->sa_lock)); return (sa_attr_op(hdl, bulk, count, SA_LOOKUP, NULL)); } int sa_lookup(sa_handle_t *hdl, sa_attr_type_t attr, void *buf, uint32_t buflen) { int error; sa_bulk_attr_t bulk; VERIFY3U(buflen, <=, SA_ATTR_MAX_LEN); bulk.sa_attr = attr; bulk.sa_data = buf; bulk.sa_length = buflen; bulk.sa_data_func = NULL; ASSERT(hdl); mutex_enter(&hdl->sa_lock); error = sa_lookup_impl(hdl, &bulk, 1); mutex_exit(&hdl->sa_lock); return (error); } #ifdef _KERNEL int sa_lookup_uio(sa_handle_t *hdl, sa_attr_type_t attr, uio_t *uio) { int error; sa_bulk_attr_t bulk; bulk.sa_data = NULL; bulk.sa_attr = attr; bulk.sa_data_func = NULL; ASSERT(hdl); mutex_enter(&hdl->sa_lock); if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) == 0) { error = uiomove((void *)bulk.sa_addr, MIN(bulk.sa_size, uio->uio_resid), UIO_READ, uio); } mutex_exit(&hdl->sa_lock); return (error); } #endif void * sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data) { sa_idx_tab_t *idx_tab; sa_hdr_phys_t *hdr = (sa_hdr_phys_t *)data; sa_os_t *sa = os->os_sa; sa_lot_t *tb, search; avl_index_t loc; /* * Deterimine layout number. If SA node and header == 0 then * force the index table to the dummy "1" empty layout. * * The layout number would only be zero for a newly created file * that has not added any attributes yet, or with crypto enabled which * doesn't write any attributes to the bonus buffer. */ search.lot_num = SA_LAYOUT_NUM(hdr, bonustype); tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); /* Verify header size is consistent with layout information */ ASSERT(tb); ASSERT((IS_SA_BONUSTYPE(bonustype) && SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb)) || !IS_SA_BONUSTYPE(bonustype) || (IS_SA_BONUSTYPE(bonustype) && hdr->sa_layout_info == 0)); /* * See if any of the already existing TOC entries can be reused? */ for (idx_tab = list_head(&tb->lot_idx_tab); idx_tab; idx_tab = list_next(&tb->lot_idx_tab, idx_tab)) { boolean_t valid_idx = B_TRUE; int i; if (tb->lot_var_sizes != 0 && idx_tab->sa_variable_lengths != NULL) { for (i = 0; i != tb->lot_var_sizes; i++) { if (hdr->sa_lengths[i] != idx_tab->sa_variable_lengths[i]) { valid_idx = B_FALSE; break; } } } if (valid_idx) { sa_idx_tab_hold(os, idx_tab); return (idx_tab); } } /* No such luck, create a new entry */ idx_tab = kmem_zalloc(sizeof (sa_idx_tab_t), KM_SLEEP); idx_tab->sa_idx_tab = kmem_zalloc(sizeof (uint32_t) * sa->sa_num_attrs, KM_SLEEP); idx_tab->sa_layout = tb; refcount_create(&idx_tab->sa_refcount); if (tb->lot_var_sizes) idx_tab->sa_variable_lengths = kmem_alloc(sizeof (uint16_t) * tb->lot_var_sizes, KM_SLEEP); sa_attr_iter(os, hdr, bonustype, sa_build_idx_tab, tb, idx_tab); sa_idx_tab_hold(os, idx_tab); /* one hold for consumer */ sa_idx_tab_hold(os, idx_tab); /* one for layout */ list_insert_tail(&tb->lot_idx_tab, idx_tab); return (idx_tab); } void sa_default_locator(void **dataptr, uint32_t *len, uint32_t total_len, boolean_t start, void *userdata) { ASSERT(start); *dataptr = userdata; *len = total_len; } static void sa_attr_register_sync(sa_handle_t *hdl, dmu_tx_t *tx) { uint64_t attr_value = 0; sa_os_t *sa = hdl->sa_os->os_sa; sa_attr_table_t *tb = sa->sa_attr_table; int i; mutex_enter(&sa->sa_lock); if (!sa->sa_need_attr_registration || sa->sa_master_obj == 0) { mutex_exit(&sa->sa_lock); return; } if (sa->sa_reg_attr_obj == 0) { sa->sa_reg_attr_obj = zap_create_link(hdl->sa_os, DMU_OT_SA_ATTR_REGISTRATION, sa->sa_master_obj, SA_REGISTRY, tx); } for (i = 0; i != sa->sa_num_attrs; i++) { if (sa->sa_attr_table[i].sa_registered) continue; ATTR_ENCODE(attr_value, tb[i].sa_attr, tb[i].sa_length, tb[i].sa_byteswap); VERIFY(0 == zap_update(hdl->sa_os, sa->sa_reg_attr_obj, tb[i].sa_name, 8, 1, &attr_value, tx)); tb[i].sa_registered = B_TRUE; } sa->sa_need_attr_registration = B_FALSE; mutex_exit(&sa->sa_lock); } /* * Replace all attributes with attributes specified in template. * If dnode had a spill buffer then those attributes will be * also be replaced, possibly with just an empty spill block * * This interface is intended to only be used for bulk adding of * attributes for a new file. It will also be used by the ZPL * when converting and old formatted znode to native SA support. */ int sa_replace_all_by_template_locked(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count, dmu_tx_t *tx) { sa_os_t *sa = hdl->sa_os->os_sa; if (sa->sa_need_attr_registration) sa_attr_register_sync(hdl, tx); return (sa_build_layouts(hdl, attr_desc, attr_count, tx)); } int sa_replace_all_by_template(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count, dmu_tx_t *tx) { int error; mutex_enter(&hdl->sa_lock); error = sa_replace_all_by_template_locked(hdl, attr_desc, attr_count, tx); mutex_exit(&hdl->sa_lock); return (error); } /* * add/remove/replace a single attribute and then rewrite the entire set * of attributes. */ static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, sa_data_op_t action, sa_data_locator_t *locator, void *datastart, uint16_t buflen, dmu_tx_t *tx) { sa_os_t *sa = hdl->sa_os->os_sa; dmu_buf_impl_t *db = (dmu_buf_impl_t *)hdl->sa_bonus; dnode_t *dn; sa_bulk_attr_t *attr_desc; void *old_data[2]; int bonus_attr_count = 0; int bonus_data_size = 0; int spill_data_size = 0; int spill_attr_count = 0; int error; uint16_t length; int i, j, k, length_idx; sa_hdr_phys_t *hdr; sa_idx_tab_t *idx_tab; int attr_count; int count; ASSERT(MUTEX_HELD(&hdl->sa_lock)); /* First make of copy of the old data */ DB_DNODE_ENTER(db); dn = DB_DNODE(db); if (dn->dn_bonuslen != 0) { bonus_data_size = hdl->sa_bonus->db_size; old_data[0] = kmem_alloc(bonus_data_size, KM_SLEEP); bcopy(hdl->sa_bonus->db_data, old_data[0], hdl->sa_bonus->db_size); bonus_attr_count = hdl->sa_bonus_tab->sa_layout->lot_attr_count; } else { old_data[0] = NULL; } DB_DNODE_EXIT(db); /* Bring spill buffer online if it isn't currently */ if ((error = sa_get_spill(hdl)) == 0) { spill_data_size = hdl->sa_spill->db_size; old_data[1] = vmem_alloc(spill_data_size, KM_SLEEP); bcopy(hdl->sa_spill->db_data, old_data[1], hdl->sa_spill->db_size); spill_attr_count = hdl->sa_spill_tab->sa_layout->lot_attr_count; } else if (error && error != ENOENT) { if (old_data[0]) kmem_free(old_data[0], bonus_data_size); return (error); } else { old_data[1] = NULL; } /* build descriptor of all attributes */ attr_count = bonus_attr_count + spill_attr_count; if (action == SA_ADD) attr_count++; else if (action == SA_REMOVE) attr_count--; attr_desc = kmem_zalloc(sizeof (sa_bulk_attr_t) * attr_count, KM_SLEEP); /* * loop through bonus and spill buffer if it exists, and * build up new attr_descriptor to reset the attributes */ k = j = 0; count = bonus_attr_count; hdr = SA_GET_HDR(hdl, SA_BONUS); idx_tab = SA_IDX_TAB_GET(hdl, SA_BONUS); for (; k != 2; k++) { /* * Iterate over each attribute in layout. Fetch the * size of variable-length attributes needing rewrite * from sa_lengths[]. */ for (i = 0, length_idx = 0; i != count; i++) { sa_attr_type_t attr; attr = idx_tab->sa_layout->lot_attrs[i]; length = SA_REGISTERED_LEN(sa, attr); if (attr == newattr) { if (length == 0) ++length_idx; if (action == SA_REMOVE) continue; ASSERT(length == 0); ASSERT(action == SA_REPLACE); SA_ADD_BULK_ATTR(attr_desc, j, attr, locator, datastart, buflen); } else { if (length == 0) length = hdr->sa_lengths[length_idx++]; SA_ADD_BULK_ATTR(attr_desc, j, attr, NULL, (void *) (TOC_OFF(idx_tab->sa_idx_tab[attr]) + (uintptr_t)old_data[k]), length); } } if (k == 0 && hdl->sa_spill) { hdr = SA_GET_HDR(hdl, SA_SPILL); idx_tab = SA_IDX_TAB_GET(hdl, SA_SPILL); count = spill_attr_count; } else { break; } } if (action == SA_ADD) { length = SA_REGISTERED_LEN(sa, newattr); if (length == 0) { length = buflen; } SA_ADD_BULK_ATTR(attr_desc, j, newattr, locator, datastart, length); } error = sa_build_layouts(hdl, attr_desc, attr_count, tx); if (old_data[0]) kmem_free(old_data[0], bonus_data_size); if (old_data[1]) vmem_free(old_data[1], spill_data_size); kmem_free(attr_desc, sizeof (sa_bulk_attr_t) * attr_count); return (error); } static int sa_bulk_update_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, dmu_tx_t *tx) { int error; sa_os_t *sa = hdl->sa_os->os_sa; dmu_object_type_t bonustype; dmu_buf_t *saved_spill; ASSERT(hdl); ASSERT(MUTEX_HELD(&hdl->sa_lock)); bonustype = SA_BONUSTYPE_FROM_DB(SA_GET_DB(hdl, SA_BONUS)); saved_spill = hdl->sa_spill; /* sync out registration table if necessary */ if (sa->sa_need_attr_registration) sa_attr_register_sync(hdl, tx); error = sa_attr_op(hdl, bulk, count, SA_UPDATE, tx); if (error == 0 && !IS_SA_BONUSTYPE(bonustype) && sa->sa_update_cb) sa->sa_update_cb(hdl, tx); /* * If saved_spill is NULL and current sa_spill is not NULL that * means we increased the refcount of the spill buffer through * sa_get_spill() or dmu_spill_hold_by_dnode(). Therefore we * must release the hold before calling dmu_tx_commit() to avoid * making a copy of this buffer in dbuf_sync_leaf() due to the * reference count now being greater than 1. */ if (!saved_spill && hdl->sa_spill) { if (hdl->sa_spill_tab) { sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); hdl->sa_spill_tab = NULL; } dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL); hdl->sa_spill = NULL; } return (error); } /* * update or add new attribute */ int sa_update(sa_handle_t *hdl, sa_attr_type_t type, void *buf, uint32_t buflen, dmu_tx_t *tx) { int error; sa_bulk_attr_t bulk; VERIFY3U(buflen, <=, SA_ATTR_MAX_LEN); bulk.sa_attr = type; bulk.sa_data_func = NULL; bulk.sa_length = buflen; bulk.sa_data = buf; mutex_enter(&hdl->sa_lock); error = sa_bulk_update_impl(hdl, &bulk, 1, tx); mutex_exit(&hdl->sa_lock); return (error); } /* * Return size of an attribute */ int sa_size(sa_handle_t *hdl, sa_attr_type_t attr, int *size) { sa_bulk_attr_t bulk; int error; bulk.sa_data = NULL; bulk.sa_attr = attr; bulk.sa_data_func = NULL; ASSERT(hdl); mutex_enter(&hdl->sa_lock); if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) != 0) { mutex_exit(&hdl->sa_lock); return (error); } *size = bulk.sa_size; mutex_exit(&hdl->sa_lock); return (0); } int sa_bulk_lookup_locked(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) { ASSERT(hdl); ASSERT(MUTEX_HELD(&hdl->sa_lock)); return (sa_lookup_impl(hdl, attrs, count)); } int sa_bulk_lookup(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) { int error; ASSERT(hdl); mutex_enter(&hdl->sa_lock); error = sa_bulk_lookup_locked(hdl, attrs, count); mutex_exit(&hdl->sa_lock); return (error); } int sa_bulk_update(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count, dmu_tx_t *tx) { int error; ASSERT(hdl); mutex_enter(&hdl->sa_lock); error = sa_bulk_update_impl(hdl, attrs, count, tx); mutex_exit(&hdl->sa_lock); return (error); } int sa_remove(sa_handle_t *hdl, sa_attr_type_t attr, dmu_tx_t *tx) { int error; mutex_enter(&hdl->sa_lock); error = sa_modify_attrs(hdl, attr, SA_REMOVE, NULL, NULL, 0, tx); mutex_exit(&hdl->sa_lock); return (error); } void sa_object_info(sa_handle_t *hdl, dmu_object_info_t *doi) { dmu_object_info_from_db((dmu_buf_t *)hdl->sa_bonus, doi); } void sa_object_size(sa_handle_t *hdl, uint32_t *blksize, u_longlong_t *nblocks) { dmu_object_size_from_db((dmu_buf_t *)hdl->sa_bonus, blksize, nblocks); } void sa_set_userp(sa_handle_t *hdl, void *ptr) { hdl->sa_userp = ptr; } dmu_buf_t * sa_get_db(sa_handle_t *hdl) { return ((dmu_buf_t *)hdl->sa_bonus); } void * sa_get_userdata(sa_handle_t *hdl) { return (hdl->sa_userp); } void sa_register_update_callback_locked(objset_t *os, sa_update_cb_t *func) { ASSERT(MUTEX_HELD(&os->os_sa->sa_lock)); os->os_sa->sa_update_cb = func; } void sa_register_update_callback(objset_t *os, sa_update_cb_t *func) { mutex_enter(&os->os_sa->sa_lock); sa_register_update_callback_locked(os, func); mutex_exit(&os->os_sa->sa_lock); } uint64_t sa_handle_object(sa_handle_t *hdl) { return (hdl->sa_bonus->db_object); } boolean_t sa_enabled(objset_t *os) { return (os->os_sa == NULL); } int sa_set_sa_object(objset_t *os, uint64_t sa_object) { sa_os_t *sa = os->os_sa; if (sa->sa_master_obj) return (1); sa->sa_master_obj = sa_object; return (0); } int sa_hdrsize(void *arg) { sa_hdr_phys_t *hdr = arg; return (SA_HDR_SIZE(hdr)); } void sa_handle_lock(sa_handle_t *hdl) { ASSERT(hdl); mutex_enter(&hdl->sa_lock); } void sa_handle_unlock(sa_handle_t *hdl) { ASSERT(hdl); mutex_exit(&hdl->sa_lock); } #ifdef _KERNEL EXPORT_SYMBOL(sa_handle_get); EXPORT_SYMBOL(sa_handle_get_from_db); EXPORT_SYMBOL(sa_handle_destroy); EXPORT_SYMBOL(sa_buf_hold); EXPORT_SYMBOL(sa_buf_rele); EXPORT_SYMBOL(sa_spill_rele); EXPORT_SYMBOL(sa_lookup); EXPORT_SYMBOL(sa_update); EXPORT_SYMBOL(sa_remove); EXPORT_SYMBOL(sa_bulk_lookup); EXPORT_SYMBOL(sa_bulk_lookup_locked); EXPORT_SYMBOL(sa_bulk_update); EXPORT_SYMBOL(sa_size); EXPORT_SYMBOL(sa_object_info); EXPORT_SYMBOL(sa_object_size); EXPORT_SYMBOL(sa_get_userdata); EXPORT_SYMBOL(sa_set_userp); EXPORT_SYMBOL(sa_get_db); EXPORT_SYMBOL(sa_handle_object); EXPORT_SYMBOL(sa_register_update_callback); EXPORT_SYMBOL(sa_setup); EXPORT_SYMBOL(sa_replace_all_by_template); EXPORT_SYMBOL(sa_replace_all_by_template_locked); EXPORT_SYMBOL(sa_enabled); EXPORT_SYMBOL(sa_cache_init); EXPORT_SYMBOL(sa_cache_fini); EXPORT_SYMBOL(sa_set_sa_object); EXPORT_SYMBOL(sa_hdrsize); EXPORT_SYMBOL(sa_handle_lock); EXPORT_SYMBOL(sa_handle_unlock); EXPORT_SYMBOL(sa_lookup_uio); #endif /* _KERNEL */