From 2cac7f5f11756663525a5d4604d9f0a3202d4024 Mon Sep 17 00:00:00 2001 From: Turbo Fredriksson Date: Thu, 30 Jan 2014 16:26:48 +0000 Subject: Initramfs scripts for ZoL. * Supports booting of a ZFS snapshot. Do this by cloning the snapshot into a dataset. If this, the resulting dataset, already exists, destroy it. Then mount it on root. * If snapshot does not exist, use base dataset (the part before '@') as boot filesystem instead. * If no snapshot is specified on the 'root=' kernel command line, but there is an '@', then get a list of snapshots below that filesystem and ask the user which to use. * Clone with 'mountpoint=none' and 'canmount=noauto' - we mount manually and explicitly. * For sub-filesystems, that doesn't have a mountpoint property set, we use the 'org.zol:mountpoint' to keep track of it's mountpoint. * Allow rollback of snapshots instead of clone it and boot from the clone. * Allow mounting a root- and subfs with mountpoint=legacy set * Allow mounting a filesystem which is using nativ encryption. * Support all currently used kernel command line arguments All the different distributions have their own standard on what to specify on the kernel command line to boot of a ZFS filesystem. * Extra options: * zfsdebug=(on,yes,1) Show extra debugging information * zfsforce=(on,yes,1) Force import the pool * rollback=(on,yes,1) Rollback (instead of clone) the snapshot * Only try to import pool if it haven't already been imported * This will negate the need to force import a pool that have not been exported cleanly. * Support exclusion of pools to import by setting ZFS_POOL_EXCEPTIONS in /etc/default/zfs. * Support additional configuration variable ZFS_INITRD_ADDITIONAL_DATASETS to mount additional filesystems not located under your root dataset. * Include /etc/modprobe.d/{zfs,spl}.conf in the initrd if it/they exist. * Include the udev rule to use by-vdev for pool imports. * Include the /etc/default/zfs file to the initrd. * Only try /dev/disk/by-* in the initrd if USE_DISK_BY_ID is set. * Use /dev/disk/by-vdev before anything. * Add /dev as a last ditch attempt. * Fallback to using the cache file if that exist if nothing else worked. * Use /sbin/modprobe instead of built-in (BusyBox) modprobe. This gets rid of the message "modprobe: can't load module zcommon". Thanx to pcoultha for finding this. Signed-off-by: Turbo Fredriksson Signed-off-by: Brian Behlendorf Closes #2116 Closes #2114 --- contrib/initramfs/scripts/zfs | 962 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 962 insertions(+) create mode 100644 contrib/initramfs/scripts/zfs (limited to 'contrib/initramfs/scripts/zfs') diff --git a/contrib/initramfs/scripts/zfs b/contrib/initramfs/scripts/zfs new file mode 100644 index 000000000..43107c4dc --- /dev/null +++ b/contrib/initramfs/scripts/zfs @@ -0,0 +1,962 @@ +# ZFS boot stub for initramfs-tools. +# +# In the initramfs environment, the /init script sources this stub to +# override the default functions in the /scripts/local script. +# +# Enable this by passing boot=zfs on the kernel command line. +# + +# Source the common init script +. /etc/zfs/zfs-functions + +# Paths to what we need - in the initrd, these paths are hardcoded, +# so override the defines in zfs-functions. +ZFS="/sbin/zfs" +ZPOOL="/sbin/zpool" +ZPOOL_CACHE="/etc/zfs/zpool.cache" +export ZFS ZPOOL ZPOOL_CACHE + +# This runs any scripts that should run before we start importing +# pools and mounting any filesystems. +pre_mountroot() +{ + if type run_scripts > /dev/null 2>&1 && \ + [ -f "/scripts/local-top" -o -d "/scripts/local-top" ] + then + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Running /scripts/local-top" + run_scripts /scripts/local-top + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + if type run_scripts > /dev/null 2>&1 && \ + [ -f "/scripts/local-premount" -o -d "/scripts/local-premount" ] + then + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Running /scripts/local-premount" + run_scripts /scripts/local-premount + [ "$quiet" != "y" ] && zfs_log_end_msg + fi +} + +# If plymouth is availible, hide the splash image. +disable_plymouth() +{ + if [ -x /bin/plymouth ] && /bin/plymouth --ping + then + /bin/plymouth hide-splash >/dev/null 2>&1 + fi +} + +# Get a ZFS filesystem property value. +get_fs_value() +{ + local fs="$1" + local value=$2 + + "${ZFS}" get -H -ovalue $value "$fs" 2> /dev/null +} + +# Find the 'bootfs' property on pool $1. +# If the property does not contain '/', then ignore this +# pool by exporting it again. +find_rootfs() +{ + local pool="$1" + + # If it's already specified, just keep it mounted and exit + # User (kernel command line) must be correct. + if [ -n "${ZFS_BOOTFS}" ] + then + POOL_IMPORTED=1 + return 0 + fi + + # Not set, try to find it in the 'bootfs' property of the pool. + # NOTE: zpool does not support 'get -H -ovalue bootfs'... + ZFS_BOOTFS=$("${ZPOOL}" list -H -obootfs "$pool") + + # Make sure it's not '-' and that it starts with /. + if [ "${ZFS_BOOTFS}" != "-" ] && \ + $(get_fs_value "${ZFS_BOOTFS}" mountpoint | grep -q '^/$') + then + # Keep it mounted + POOL_IMPORTED=1 + return 0 + fi + + # Not boot fs here, export it and later try again.. + "${ZPOOL}" export "$pool" + + return 1 +} + +# Support function to get a list of all pools, separated with ';' +find_pools() +{ + local CMD="$*" + local pools + + pools=$($CMD 2> /dev/null | \ + grep -E "pool:|^[a-zA-Z0-9]" | \ + sed 's@.*: @@' | \ + sort | \ + while read pool; do \ + echo -n "$pool;" + done) + + echo "${pools%%;}" # Return without the last ';'. +} + +# Get a list of all availible pools +get_pools() +{ + local available_pools npools + + # Get the base list of availible pools. + available_pools=$(find_pools "$ZPOOL" import) + + # Just in case - seen it happen (that a pool isn't visable/found + # with a simple "zpool import" but only when using the "-d" + # option or setting ZPOOL_IMPORT_PATH). + if [ -d "/dev/disk/by-id" ] + then + npools=$(find_pools "$ZPOOL" import -d /dev/disk/by-id) + if [ -n "$npools" ] + then + # Because we have found extra pool(s) here, which wasn't + # found 'normaly', we need to force USE_DISK_BY_ID to + # make sure we're able to actually import it/them later. + USE_DISK_BY_ID='yes' + + if [ -n "$available_pools" ] + then + # Filter out duplicates (pools found with the simple + # "zpool import" but which is also found with the + # "zpool import -d ..."). + npools=$(echo "$npools" | sed "s,$available_pools,,") + + # Add the list to the existing list of + # available pools + available_pools="$available_pools;$npools" + else + available_pools="$npools" + fi + fi + fi + + # Filter out any exceptions... + if [ -n "$ZFS_POOL_EXCEPTIONS" ] + then + local found="" + local apools="" + local pool exception + OLD_IFS="$IFS" ; IFS=";" + + for pool in $available_pools + do + for exception in $ZFS_POOL_EXCEPTIONS + do + [ "$pool" = "$exception" ] && continue 2 + found="$pool" + done + + if [ -n "$found" ] + then + if [ -n "$apools" ] + then + apools="$apools;$pool" + else + apools="$pool" + fi + fi + done + + IFS="$OLD_IFS" + available_pools="$apools" + fi + + # Return list of availible pools. + echo "$available_pools" +} + +# Import given pool $1 +import_pool() +{ + local pool="$1" + local dirs dir ZFS_CMD ZFS_STDERR ZFS_ERROR + + # Verify that the pool isn't already imported + # Make as sure as we can to not require '-f' to import. + "${ZPOOL}" status "$pool" > /dev/null 2>&1 && return 0 + + # For backwards compability, make sure that ZPOOL_IMPORT_PATH is set + # to something we can use later with the real import(s). We want to + # make sure we find all by* dirs, BUT by-vdev should be first (if it + # exists). + if [ -n "$USE_DISK_BY_ID" -a -z "$ZPOOL_IMPORT_PATH" ] + then + dirs="$(for dir in $(echo /dev/disk/by-*) + do + # Ignore by-vdev here - we want it first! + echo "$dir" | grep -q /by-vdev && continue + [ ! -d "$dir" ] && continue + + echo -n "$dir:" + done | sed 's,:$,,g')" + + if [ -d "/dev/disk/by-vdev" ] + then + # Add by-vdev at the beginning. + ZPOOL_IMPORT_PATH="/dev/disk/by-vdev:" + fi + + # ... and /dev at the very end, just for good measure. + ZPOOL_IMPORT_PATH="$ZPOOL_IMPORT_PATH$dirs:/dev" + fi + + # Needs to be exported for "zpool" to catch it. + [ -n "$ZPOOL_IMPORT_PATH" ] && export ZPOOL_IMPORT_PATH + + + [ "$quiet" != "y" ] && zfs_log_begin_msg \ + "Importing pool '${pool}' using defaults" + + ZFS_CMD="${ZPOOL} import -N ${ZPOOL_FORCE}" + ZFS_STDERR="$($ZFS_CMD "$pool" 2>&1)" + ZFS_ERROR="$?" + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + [ "$quiet" != "y" ] && zfs_log_begin_msg \ + "Importing pool '${pool}' using cachefile." + + ZFS_CMD="${ZPOOL} import -c ${ZPOOL_CACHE} -N ${ZPOOL_FORCE}" + ZFS_STDERR="$($ZFS_CMD "$pool" 2>&1)" + ZFS_ERROR="$?" + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + disable_plymouth + echo "" + echo "Command: ${ZFS_CMD} '$pool'" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "Failed to import pool '$pool'." + echo "Manually import the pool and exit." + /bin/sh + fi + fi + + [ "$quiet" != "y" ] && zfs_log_end_msg + return 0 +} + +# Load ZFS modules +# Loading a module in a initrd require a slightly different approach, +# with more logging etc. +load_module_initrd() +{ + if [ "$ZFS_INITRD_PRE_MOUNTROOT_SLEEP" > 0 ] + then + if [ "$quiet" != "y" ]; then + zfs_log_begin_msg "Sleeping for" \ + "$ZFS_INITRD_PRE_MOUNTROOT_SLEEP seconds..." + fi + sleep "$ZFS_INITRD_PRE_MOUNTROOT_SLEEP" + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + # Wait for all of the /dev/{hd,sd}[a-z] device nodes to appear. + if type wait_for_udev > /dev/null 2>&1 ; then + wait_for_udev 10 + elif type wait_for_dev > /dev/null 2>&1 ; then + wait_for_dev + fi + + # zpool import refuse to import without a valid mtab + [ ! -f /proc/mounts ] && mount proc /proc + [ ! -f /etc/mtab ] && cat /proc/mounts > /etc/mtab + + # Load the module + load_module || return 1 + + if [ "$ZFS_INITRD_POST_MODPROBE_SLEEP" > 0 ] + then + if [ "$quiet" != "y" ]; then + zfs_log_begin_msg "Sleeping for" \ + "$ZFS_INITRD_POST_MODPROBE_SLEEP seconds..." + fi + sleep "$ZFS_INITRD_POST_MODPROBE_SLEEP" + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + return 0 +} + +# Mount a given filesystem +mount_fs() +{ + local fs="$1" + local mountpoint ZFS_CMD ZFS_STDERR ZFS_ERROR + + # Need the _original_ datasets mountpoint! + mountpoint=$(get_fs_value "$fs" mountpoint) + if [ "$mountpoint" = "legacy" -o "$mountpoint" = "none" ]; then + # Can't use the mountpoint property. Might be one of our + # clones. Check the 'org.zol:mountpoint' property set in + # clone_snap() if that's usable. + mountpoint=$(get_fs_value "$fs" org.zol:mountpoint) + if [ "$mountpoint" = "legacy" -o \ + "$mountpoint" = "none" -o \ + "$mountpoint" = "-" ] + then + if [ "$fs" != "${ZFS_BOOTFS}" ]; then + # We don't have a proper mountpoint, this + # isn't the root fs. So extract the root fs + # value from the filesystem, and we should + # (hopefully!) have a mountpoint we can use. + mountpoint="${fs##$ZFS_BOOTFS}" + else + # Last hail-mary: Hope 'rootmnt' is set! + mountpoint="" + fi + fi + + if [ "$mountpoint" = "legacy" ]; then + ZFS_CMD="mount -t zfs" + else + # If it's not a legacy filesystem, it can only be a + # native one... + ZFS_CMD="mount -o zfsutil -t zfs" + fi + else + ZFS_CMD="mount -o zfsutil -t zfs" + fi + + # Possibly decrypt a filesystem using native encryption. + decrypt_fs "$fs" + + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Mounting '${fs}' on '${rootmnt}/${mountpoint}'" + [ -n "${ZFS_DEBUG}" ] && \ + zfs_log_begin_msg "CMD: '$ZFS_CMD ${fs} ${rootmnt}/${mountpoint}'" + + ZFS_STDERR=$(${ZFS_CMD} "${fs}" "${rootmnt}/${mountpoint}" 2>&1) + ZFS_ERROR=$? + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + disable_plymouth + echo "" + echo "Command: ${ZFS_CMD} ${fs} ${rootmnt}/${mountpoint}" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "Failed to mount ${fs} on ${rootmnt}/${mountpoint}." + echo "Manually mount the filesystem and exit." + /bin/sh + else + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + return 0 +} + +# Unlock a ZFS native crypted filesystem. +decrypt_fs() +{ + local fs="$1" + local ZFS_CMD ZFS_STDERR ZFS_ERROR + + # If the 'zfs key' command isn't availible, exit right here. + "${ZFS}" 2>&1 | grep -q 'key -l ' || return 0 + + # Check if filesystem is encrypted. If not, exit right here. + [ "$(get_fs_value "$fs" encryption)" != "off" ] || return 0 + + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Loading crypto wrapper key for $fs" + + # Just make sure that ALL crypto modules module is loaded. + # Simplest just to load all... + for mod in sun-ccm sun-gcm sun-ctr + do + [ "$quiet" != "y" ] && zfs_log_progress_msg "${mod} " + + ZFS_CMD="/sbin/modprobe $mod" + ZFS_STDERR="$(${ZFS_CMD} 2>&1)" + ZFS_ERROR="$?" + + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + disable_plymouth + echo "" + echo "Command: $ZFS_CMD" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "Failed to load $mod module." + echo "Please verify that it is availible on the initrd image" + echo "(without it it won't be possible to unlock the filesystem)" + echo "and rerun: $ZFS_CMD" + /bin/sh + else + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + done + + # If the key isn't availible, then this will fail! + ZFS_CMD="${ZFS} key -l -r $fs" + ZFS_STDERR="$(${ZFS_CMD} 2>&1)" + ZFS_ERROR="$?" + + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + disable_plymouth + echo "" + echo "Command: $ZFS_CMD" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "Failed to load zfs encryption wrapper key (s)." + echo "Please verify dataset property 'keysource' for datasets" + echo "and rerun: $ZFS_CMD" + /bin/sh + else + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + return 0 +} + +# Destroy a given filesystem. +destroy_fs() +{ + local fs="$1" + local ZFS_CMD ZFS_STDERR ZFS_ERROR + + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Destroying '$fs'" + + ZFS_CMD="${ZFS} destroy $fs" + ZFS_STDERR="$(${ZFS_CMD} 2>&1)" + ZFS_ERROR="$?" + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + disable_plymouth + echo "" + echo "Command: $ZFS_CMD" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "Failed to destroy '$fs'. Please make sure that '$fs' is not availible." + echo "Hint: Try: zfs destroy -Rfn $fs" + echo "If this dryrun looks good, then remove the 'n' from '-Rfn' and try again." + /bin/sh + else + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + return 0 +} + +# Clone snapshot $1 to destination filesystem $2 +# Set 'canmount=noauto' and 'mountpoint=none' so that we get to keep +# manual controll over it's mounting (i.e., make sure it's not automatically +# mounted with a 'zfs mount -a' in the init/systemd scripts). +clone_snap() +{ + local snap="$1" + local destfs="$2" + local mountpoint="$3" + local ZFS_CMD ZFS_STDERR ZFS_ERROR + + [ "$quiet" != "y" ] && zfs_log_begin_msg "Cloning '$snap' to '$destfs'" + + # Clone the snapshot into a dataset we can boot from + # + We don't want this filesystem to be automatically mounted, we + # want controll over this here and nowhere else. + # + We don't need any mountpoint set for the same reason. + # We use the 'org.zol:mountpoint' property to remember the mountpoint. + ZFS_CMD="${ZFS} clone -o canmount=noauto -o mountpoint=none" + ZFS_CMD="${ZFS_CMD} -o org.zol:mountpoint=${mountpoint}" + ZFS_CMD="${ZFS_CMD} $snap $destfs" + ZFS_STDERR="$(${ZFS_CMD} 2>&1)" + ZFS_ERROR="$?" + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + disable_plymouth + echo "" + echo "Command: $ZFS_CMD" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "Failed to clone snapshot." + echo "Make sure that the any problems are corrected and then make sure" + echo "that the dataset '$destfs' exists and is bootable." + /bin/sh + else + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + return 0 +} + +# Rollback a given snapshot. +rollback_snap() +{ + local snap="$1" + local ZFS_CMD ZFS_STDERR ZFS_ERROR + + [ "$quiet" != "y" ] && zfs_log_begin_msg "Rollback $snap" + + ZFS_CMD="${ZFS} rollback -Rf $snap" + ZFS_STDERR="$(${ZFS_CMD} 2>&1)" + ZFS_ERROR="$?" + if [ "${ZFS_ERROR}" != 0 ] + then + [ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}" + + disable_plymouth + echo "" + echo "Command: $ZFS_CMD" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "Failed to rollback snapshot." + /bin/sh + else + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + return 0 +} + +# Get a list of snapshots, give them as a numbered list +# to the user to choose from. +ask_user_snap() +{ + local fs="$1" + local i=1 + local SNAP snapnr snap debug + + # We need to temporarily disable debugging. Set 'debug' so we + # remember to enabled it again. + if [ -n "${ZFS_DEBUG}" ]; then + unset ZFS_DEBUG + set +x + debug=1 + fi + + # Because we need the resulting snapshot, which is sent on + # stdout to the caller, we use stderr for our questions. + echo "What snapshot do you want to boot from?" > /dev/stderr + while read snap; do + echo " $i: ${snap}" > /dev/stderr + eval `echo SNAP_$i=$snap` + i=$((i + 1)) + done < /dev/stderr + read snapnr + + # Reenable debugging. + if [ -n "${debug}" ]; then + ZFS_DEBUG=1 + set -x + fi + + echo "$(eval echo "$"SNAP_$snapnr)" +} + +setup_snapshot_booting() +{ + local snap="$1" + local s destfs subfs mountpoint retval=0 filesystems fs + + # Make sure that the snapshot specified actually exist. + if [ ! $(get_fs_value "${snap}" type) ] + then + # Snapshot does not exist (...@ ?) + # ask the user for a snapshot to use. + snap="$(ask_user_snap "${snap%%@*}")" + fi + + # Separate the full snapshot ('$snap') into it's filesystem and + # snapshot names. Would have been nice with a split() function.. + rootfs="${snap%%@*}" + snapname="${snap##*@}" + ZFS_BOOTFS="${rootfs}_${snapname}" + + if ! grep -qiE '(^|[^\\](\\\\)* )(rollback)=(on|yes|1)( |$)' /proc/cmdline + then + # If the destination dataset for the clone + # already exists, destroy it. Recursivly + if [ $(get_fs_value "${rootfs}_${snapname}" type) ]; then + filesystems=$("${ZFS}" list -oname -tfilesystem -H \ + -r "${ZFS_BOOTFS}" | sort -r) + for fs in $filesystems; do + destroy_fs "${fs}" + done + fi + fi + + # Get all snapshots, recursivly (might need to clone /usr, /var etc + # as well). + for s in $("${ZFS}" list -H -oname -tsnapshot -r "${rootfs}" | \ + grep "${snapname}") + do + if grep -qiE '(^|[^\\](\\\\)* )(rollback)=(on|yes|1)( |$)' /proc/cmdline + then + # Rollback snapshot + rollback_snap "$s" || retval=$((retval + 1)) + else + # Setup a destination filesystem name. + # Ex: Called with 'rpool/ROOT/debian@snap2' + # rpool/ROOT/debian@snap2 => rpool/ROOT/debian_snap2 + # rpool/ROOT/debian/boot@snap2 => rpool/ROOT/debian_snap2/boot + # rpool/ROOT/debian/usr@snap2 => rpool/ROOT/debian_snap2/usr + # rpool/ROOT/debian/var@snap2 => rpool/ROOT/debian_snap2/var + subfs="${s##$rootfs}" + subfs="${subfs%%@$snapname}" + + destfs="${rootfs}_${snapname}" # base fs. + [ -n "$subfs" ] && destfs="${destfs}$subfs" # + sub fs. + + # Get the mountpoint of the filesystem, to be used + # with clone_snap(). If legacy or none, then use + # the sub fs value. + mountpoint=$(get_fs_value "${s%%@*}" mountpoint) + if [ "$mountpoint" = "legacy" -o \ + "$mountpoint" = "none" ] + then + if [ -n "${subfs}" ]; then + mountpoint="${subfs}" + else + mountpoint="/" + fi + fi + + # Clone the snapshot into its own + # filesystem + clone_snap "$s" "${destfs}" "${mountpoint}" || \ + retval=$((retval + 1)) + fi + done + + # If we haven't return yet, we have a problem... + return "${retval}" +} + +# ================================================================ + +# This is the main function. +mountroot() +{ + local snaporig + local snapsub + local destfs + + # ---------------------------------------------------------------- + # I N I T I A L S E T U P + + # ------------ + # Run the pre-mount scripts from /scripts/local-top. + pre_mountroot + + # ------------ + # Source the default setup variables. + [ -r '/etc/default/zfs' ] && . /etc/default/zfs + + # ------------ + # Support debug option + if grep -qiE '(^|[^\\](\\\\)* )(zfs_debug|zfs\.debug|zfsdebug)=(on|yes|1)( |$)' /proc/cmdline + then + ZFS_DEBUG=1 + mkdir /var/log + #exec 2> /var/log/boot.debug + set -x + fi + + # ------------ + # Load ZFS module etc. + if ! load_module_initrd; then + disable_plymouth + echo "" + echo "Failed to load ZFS modules." + echo "Manually load the modules and exit." + /bin/sh + fi + + # ------------ + # Look for the cache file (if any). + [ ! -f ${ZPOOL_CACHE} ] && unset ZPOOL_CACHE + + # ------------ + # Compatibility: 'ROOT' is for Debian GNU/Linux (etc), + # 'root' is for Redhat/Fedora (etc), + # 'REAL_ROOT' is for Gentoo + if [ -z "$ROOT" ] + then + [ -n "$root" ] && ROOT=${root} + + [ -n "$REAL_ROOT" ] && ROOT=${REAL_ROOT} + fi + + # ------------ + # Where to mount the root fs in the initrd - set outside this script + # Compatibility: 'rootmnt' is for Debian GNU/Linux (etc), + # 'NEWROOT' is for RedHat/Fedora (etc), + # 'NEW_ROOT' is for Gentoo + if [ -z "$rootmnt" ] + then + [ -n "$NEWROOT" ] && rootmnt=${NEWROOT} + + [ -n "$NEW_ROOT" ] && rootmnt=${NEW_ROOT} + fi + + # ------------ + # No longer set in the defaults file, but it could have been set in + # get_pools() in some circumstances. If it's something, but not 'yes', + # it's no good to us. + [ -n "$USE_DISK_BY_ID" -a "$USE_DISK_BY_ID" != 'yes' ] && \ + unset USE_DISK_BY_ID + + # ---------------------------------------------------------------- + # P A R S E C O M M A N D L I N E O P T I O N S + + # This part is the really ugly part - there's so many options and permutations + # 'out there', and if we should make this the 'primary' source for ZFS initrd + # scripting, we need/should support them all. + # + # Supports the following kernel command line argument combinations + # (in this order - first match win): + # + # rpool= (tries to finds bootfs automatically) + # bootfs=/ (uses this for rpool - first part) + # rpool= bootfs=/ + # -B zfs-bootfs=/ (uses this for rpool - first part) + # rpool=rpool (default if none of the above is used) + # root=/ (uses this for rpool - first part) + # root=ZFS=/ (uses this for rpool - first part, without 'ZFS=') + # root=zfs:AUTO (tries to detect both pool and rootfs + # root=zfs:/ (uses this for rpool - first part, without 'zfs:') + # + # Option could also be + + # ------------ + # Support force option + # In addition, setting one of zfs_force, zfs.force or zfsforce to + # 'yes', 'on' or '1' will make sure we force import the pool. + # This should (almost) never be needed, but it's here for + # completeness. + ZPOOL_FORCE="" + if grep -qiE '(^|[^\\](\\\\)* )(zfs_force|zfs\.force|zfsforce)=(on|yes|1)( |$)' /proc/cmdline + then + ZPOOL_FORCE="-f" + fi + + # ------------ + # Look for 'rpool' and 'bootfs' parameter + [ -n "$rpool" ] && ZFS_RPOOL="${rpool#rpool=}" + [ -n "$bootfs" ] && ZFS_BOOTFS="${bootfs#bootfs=}" + + # ------------ + # If we have 'ROOT' (see above), but not 'ZFS_BOOTFS', then use + # 'ROOT' + [ -n "$ROOT" -a -z "${ZFS_BOOTFS}" ] && ZFS_BOOTFS="$ROOT" + + # ------------ + # Check for the `-B zfs-bootfs=%s/%u,...` kind of parameter. + # NOTE: Only use the pool name and dataset. The rest is not + # supported by ZoL (whatever it's for). + if [ -z "$ZFS_RPOOL" ] + then + # The ${zfs-bootfs} variable is set at the kernel commmand + # line, usually by GRUB, but it cannot be referenced here + # directly because bourne variable names cannot contain a + # hyphen. + # + # Reassign the variable by dumping the environment and + # stripping the zfs-bootfs= prefix. Let the shell handle + # quoting through the eval command. + eval ZFS_RPOOL=$(set | sed -n -e 's,^zfs-bootfs=,,p') + fi + + # ------------ + # No root fs or pool specified - do auto detect. + if [ -z "$ZFS_RPOOL" -a -z "${ZFS_BOOTFS}" ] + then + # Do auto detect. Do this by 'cheating' - set 'root=zfs:AUTO' + # which will be caught later + ROOT=zfs:AUTO + fi + + # ---------------------------------------------------------------- + # F I N D A N D I M P O R T C O R R E C T P O O L + + # ------------ + if [ "$ROOT" = "zfs:AUTO" ] + then + # Try to detect both pool and root fs. + + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Attempting to import additional pools." + + # Get a list of pools available for import + if [ -n "$ZFS_RPOOL" ] + then + # We've specified a pool - check only that + POOLS=$ZFS_RPOOL + else + POOLS=$(get_pools) + fi + + OLD_IFS="$IFS" ; IFS=";" + for pool in $POOLS + do + [ -z "$pool" ] && continue + + import_pool "$pool" + find_rootfs "$pool" + done + IFS="$OLD_IFS" + + [ "$quiet" != "y" ] && zfs_log_end_msg $ZFS_ERROR + else + # No auto - use value from the command line option. + + # Strip 'zfs:' and 'ZFS='. + ZFS_BOOTFS="${ROOT#*[:=]}" + + # Stip everything after the first slash. + ZFS_RPOOL="${ZFS_BOOTFS%%/*}" + fi + + # Import the pool (if not already done so in the AUTO check above). + if [ -n "$ZFS_RPOOL" -a -z "${POOL_IMPORTED}" ] + then + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Importing ZFS root pool '$ZFS_RPOOL'" + + import_pool "${ZFS_RPOOL}" + find_rootfs "${ZFS_RPOOL}" + + [ "$quiet" != "y" ] && zfs_log_end_msg + fi + + if [ -z "${POOL_IMPORTED}" ] + then + # No pool imported, this is serious! + disable_plymouth + echo "" + echo "Command: $ZFS_CMD" + echo "Message: $ZFS_STDERR" + echo "Error: $ZFS_ERROR" + echo "" + echo "No pool imported. Manually import the root pool" + echo "at the command prompt and then exit." + echo "Hint: Try: zpool import -R ${rootmnt} -N ${ZFS_RPOOL}" + /bin/sh + fi + + # ---------------------------------------------------------------- + # P R E P A R E R O O T F I L E S Y S T E M + + if [ -n "${ZFS_BOOTFS}" ] + then + # Booting from a snapshot? + # Will overwrite the ZFS_BOOTFS variable like so: + # rpool/ROOT/debian@snap2 => rpool/ROOT/debian_snap2 + echo "${ZFS_BOOTFS}" | grep -q '@' && \ + setup_snapshot_booting "${ZFS_BOOTFS}" + fi + + if [ -z "${ZFS_BOOTFS}" ] + then + # Still nothing! Let the user sort this out. + disable_plymouth + echo "" + echo "Error: Unknown root filesystem - no 'bootfs' pool property and" + echo " not specified on the kernel command line." + echo "" + echo "Manually mount the root filesystem on $rootmnt and then exit." + echo "Hint: Try: mount -o zfsutil -t zfs ${ZFS_RPOOL-rpool}/ROOT/system $rootmnt" + /bin/sh + fi + + # ---------------------------------------------------------------- + # M O U N T F I L E S Y S T E M S + + # * Ideally, the root filesystem would be mounted like this: + # + # zpool import -R "$rootmnt" -N "$ZFS_RPOOL" + # zfs mount -o mountpoint=/ "${ZFS_BOOTFS}" + # + # but the MOUNTPOINT prefix is preserved on descendent filesystem + # after the pivot into the regular root, which later breaks things + # like `zfs mount -a` and the /etc/mtab refresh. + # + # * Mount additional filesystems required + # Such as /usr, /var, /usr/local etc. + # NOTE: Mounted in the order specified in the + # ZFS_INITRD_ADDITIONAL_DATASETS variable so take care! + + # Go through the complete list (recursivly) of all filesystems below + # the real root dataset + filesystems=$("${ZFS}" list -oname -tfilesystem -H -r "${ZFS_BOOTFS}") + for fs in $filesystems $ZFS_INITRD_ADDITIONAL_DATASETS + do + mount_fs "$fs" + done + + # ------------ + # Debugging information + if [ -n "${ZFS_DEBUG}" ] + then + #exec 2>&1- + + echo "DEBUG: imported pools:" + "${ZPOOL}" list -H + echo + + echo "DEBUG: mounted ZFS filesystems:" + mount | grep zfs + echo + + echo "=> waiting for ENTER before continuing because of 'zfsdebug=1'. " + echo -n " 'c' for shell, 'r' for reboot, 'ENTER' to continue. " + read b + + [ "$b" = "c" ] && /bin/sh + [ "$b" = "r" ] && reboot -f + + set +x + fi + + # ------------ + # Run local bottom script + if type run_scripts > /dev/null 2>&1 && \ + [ -f "/scripts/local-bottom" -o -d "/scripts/local-bottom" ] + then + [ "$quiet" != "y" ] && \ + zfs_log_begin_msg "Running /scripts/local-bottom" + run_scripts /scripts/local-bottom + [ "$quiet" != "y" ] && zfs_log_end_msg + fi +} -- cgit v1.2.3