aboutsummaryrefslogtreecommitdiffstats
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
* Replace libexecdir with datadirBrian Behlendorf2013-03-065-90/+16
| | | | | | | | | | According to the FHS. Testing scripts and examples which are all architecture independent should be installed in a subdirectory under /usr/share. http://www.pathname.com/fhs/2.2/fhs-4.11.html Signed-off-by: Brian Behlendorf <[email protected]>
* Add snapdev=[hidden|visible] dataset propertyEric Dillmann2013-03-051-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new snapdev dataset property may be set to control the visibility of zvol snapshot devices. By default this value is set to 'hidden' which will prevent zvol snapshots from appearing under /dev/zvol/ and /dev/<dataset>/. When set to 'visible' all zvol snapshots for the dataset will be visible. This functionality was largely added because when automatic snapshoting is enabled large numbers of read-only zvol snapshots will be created. When creating these devices the kernel will attempt to read their partition tables, and blkid will attempt to identify any filesystems on those partitions. This leads to a variety of issues: 1) The zvol partition tables will be read in the context of the `modprobe zfs` for automatically imported pools. This is undesirable and should be done asynchronously, but for now reducing the number of visible devices helps. 2) Udev expects to be able to complete its work for a new block devices fairly quickly. When many zvol devices are added at the same time this is no longer be true. It can lead to udev timeouts and missing /dev/zvol links. 3) Simply having lots of devices in /dev/ can be aukward from a management standpoint. Hidding the devices your unlikely to ever use helps with this. Any snapshot device which is needed can be made visible by changing the snapdev property. NOTE: This patch changes the default behavior for zvols which was effectively 'snapdev=visible'. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1235 Closes #945 Issue #956 Issue #756
* Retire zpool_id infrastructureBrian Behlendorf2013-01-298-172/+12
| | | | | | | | | | | | | | | | | | | In the interest of maintaining only one udev helper to give vdevs user friendly names, the zpool_id and zpool_layout infrastructure is being retired. They are superseded by vdev_id which incorporates all the previous functionality. Documentation for the new vdev_id(8) helper and its configuration file, vdev_id.conf(5), can be found in their respective man pages. Several useful example files are installed under /etc/zfs/. /etc/zfs/vdev_id.conf.alias.example /etc/zfs/vdev_id.conf.multipath.example /etc/zfs/vdev_id.conf.sas_direct.example /etc/zfs/vdev_id.conf.sas_switch.example Signed-off-by: Brian Behlendorf <[email protected]> Closes #981
* Quiet mkfs.ext2 outputBrian Behlendorf2013-01-281-1/+1
| | | | | | | | | The -q option should quiet the mkfs.ext2 output but certain versions of e2fsprogs appear to ignore it. This can result in an extra 'done' message in the test output. To keep this noise from distracting just direct stdout to /dev/null. Signed-off-by: Brian Behlendorf <[email protected]>
* Stop using /bin/ as a source in zconfig.shBrian Behlendorf2013-01-282-10/+33
| | | | | | | | | | | | | | | | | Test 5, 6, 7, and 7 in zconfig.sh use /bin/ as a source of random directories and files for their test. This has lead to unexpected tests failures because the total size of /bin/ on the test system isn't checked and it is entirely possible for it to be larger than the target filesystem. To resolve this issue we create a somewhat random collection of files and directories in /var/tmp to use. On average we expect about 5MB of data with the worst case being 20MB. This is large enough to be interesting and small enough to always fit in the default test datasets. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1113
* Fix zconfig.sh partitioning errorBrian Behlendorf2013-01-241-2/+2
| | | | | | | | | | | Parted version 3.0 doesn't allow us to specify the start and end percentages as 50% and 100% respectively. This results in: Error: The location 100% is outside the device /dev/zd0 Therefore we change the syntax to 51% and -1 for end of device. Signed-off-by: Brian Behlendorf <[email protected]>
* Fix test script error codesBrian Behlendorf2013-01-241-1/+1
| | | | | | | | | The 'exit $?' command in the INT TERM EXIT trap was overwritting the expected error code with the error code from mv. Fix the issue by removing the 'exit $?'. It's important the we preserve the original error code so failures are easily noticed. Signed-off-by: Brian Behlendorf <[email protected]>
* Implemented sharing datasets via SMB using libshareTurbo Fredriksson2012-12-032-1/+216
| | | | | | | | | Add the initial support for the 'smbshare' option using the existing libshare infrastructure. Because this implementation relies on usershares samba version 3.0.23 is required. Signed-off-by: Brian Behlendorf <[email protected]> Closes #493
* Do not return /dev/loop-control in unused_loop_deviceAndrew Reid2012-10-151-1/+1
| | | | | | | | | | | | | | | | | | The function unused_loop_device in /usr/libexec/zfs/common.sh returns /dev/loop-control on the first call. This device is NOT a loop device (https://github.com/torvalds/linux/commit/770fe30) it is a control device. This in turn causes the script zconfig.sh to fail with: zpool-create.sh: Error 1 creating /tmp/zpool-vdev0 -> /dev/loop-control loopback The patch makes the function return /dev/loop[0-9]* which are loop devices. Signed-off-by: Andrew Reid <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #797
* Force 4K blocksize when testing ext2 on zvol.Etienne Dechamps2012-10-031-1/+3
| | | | | | | | | | | | | | | Currently, mkfs.ext2 on zconfig.sh zvols tries to use a 8K blocksize, probably because by default zvol exposes an optimal I/O size of 8K. Unfortunately, a ext2 blocksize of 8K is not supported by the kernel, so the resulting filesystem is unmountable. This patch fixes the issue by making sure the blocksize is 4K. We have to use -F to force it else mkfs.ext2 won't allow us to use a blocksize smaller than the optimal I/O size. Signed-off-by: Brian Behlendorf <[email protected]> Closes #979
* Remove autotools productsBrian Behlendorf2012-08-276-3131/+1
| | | | | | | | Remove all of the generated autotools products from the repository and update the .gitignore files accordingly. Signed-off-by: Brian Behlendorf <[email protected]> Closes #718
* Set zvol discard_granularity to the volblocksize.Etienne Dechamps2012-08-075-0/+5
| | | | | | | | | | | | | | | | | | Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <[email protected]> Closes #862
* Linux 3.5 compat, end_writeback() changed to clear_inode()Richard Yao2012-07-235-0/+5
| | | | | | | | | | | | | | | | The end_writeback() function was changed by moving the call to inode_sync_wait() earlier in to evict(). This effecitvely changes the ordering of the sync but it does not impact the details of the zfs implementation. However, as part of this change end_writeback() was renamed to clear_inode() to reflect the new semantics. This change does impact us and clear_inode() now maps to end_writeback() for kernels prior to 3.5. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #784
* Linux 3.5 compat, iops->truncate_range() removedRichard Yao2012-07-235-0/+5
| | | | | | | | | The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #784
* Linux 3.5 compat, eops->encode_fh() takes inodesRichard Yao2012-07-235-0/+5
| | | | | | | | | | | | | | The export_operations member ->encode_fh() has been updated to take both the child and parent inodes. This interface used to take the child dentry and a bool describing if the parent is needed. NOTE: While updating this code I noticed that we do not currently cleanly handle the case where we're passed a connectable parent. This code should be audited to make sure we're doing the right thing. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #784
* Move partition scanning from userspace to module.Etienne Dechamps2012-07-175-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, zpool online -e (dynamic vdev expansion) doesn't work on whole disks because we're invoking ioctl(BLKRRPART) from userspace while ZFS still has a partition open on the disk, which results in EBUSY. This patch moves the BLKRRPART invocation from the zpool utility to the module. Specifically, this is done just before opening the device in vdev_disk_open() which is called inside vdev_reopen(). This requires jumping through some hoops to get to the disk device from the partition device, and to make sure we can still open the partition after the BLKRRPART call. Note that this new code path is triggered on dynamic vdev expansion only; other actions, like creating a new pool, are unchanged and still call BLKRRPART from userspace. This change also depends on API changes which are available in 2.6.37 and latter kernels. The build system has been updated to detect this, but there is no compatibility mode for older kernels. This means that online expansion will NOT be available in older kernels. However, it will still be possible to expand the vdev offline. Signed-off-by: Brian Behlendorf <[email protected]> Closes #808
* Linux 3.4 compat, d_make_root() replaces d_alloc_root()Richard Yao2012-06-115-0/+5
| | | | | | | | | | | | | | | | | | | | torvalds/linux@adc0e91ab142abe93f5b0d7980ada8a7676231fe introduced introduced d_make_root() as a replacement for d_alloc_root(). Further commits appear to have removed d_alloc_root() from the Linux source tree. This causes the following failure: error: implicit declaration of function 'd_alloc_root' [-Werror=implicit-function-declaration] To correct this we update the code to use the current d_make_root() interface for readability. Then we introduce an autotools check to determine if d_make_root() is available. If it isn't then we define some compatibility logic which used the older d_alloc_root() interface. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #776
* Linux 3.3 compat, iops->create()/mkdir()/mknod()Brian Behlendorf2012-04-305-0/+5
| | | | | | | | | | The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <[email protected]> Closes #701
* Add --enable-debug-dmu-tx configure optionBrian Behlendorf2012-03-235-0/+5
| | | | | | | | | | | | | | | | | | Allow rigorous (and expensive) tx validation to be enabled/disabled indepentantly from the standard zfs debugging. When enabled these checks ensure that all txs are constructed properly and that a dbuf is never dirtied without taking the correct tx hold. This checking is particularly helpful when adding new dmu consumers like Lustre. However, for established consumers such as the zpl with no known outstanding tx construction problems this is just overhead. --enable-debug-dmu-tx - Enable/disable validation of each tx as --disable-debug-dmu-tx it is constructed. By default validation is disabled due to performance concerns. Signed-off-by: Brian Behlendorf <[email protected]>
* Add .zfs control directoryBrian Behlendorf2012-03-225-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <[email protected]> Contributiobs-by: Andrew Barnes <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #173
* Cleanly support debug packagesBrian Behlendorf2012-02-275-0/+5
| | | | | | | | | | | | | | | | | | | Allow a source rpm to be rebuilt with debugging enabled. This avoids the need to have to manually modify the spec file. By default debugging is still largely disabled. To enable specific debugging features use the following options with rpmbuild. '--with debug' - Enables ASSERTs # For example: $ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm Additionally, ZFS_CONFIG has been added to zfs_config.h for packages which build against these headers. This is critical to ensure both zfs and the dependant package are using the same prototype and structure definitions. Signed-off-by: Brian Behlendorf <[email protected]>
* Add support for DISCARD to ZVOLs.Etienne Dechamps2012-02-095-0/+5
| | | | | | | | | | | | | | | | | | | | DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <[email protected]>
* Support the fallocate() file operation.Etienne Dechamps2012-02-095-0/+5
| | | | | | | | | | | | | | Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is supported, since it's the only one that matches the behavior of zfs_space(). This makes it pretty much useless in its current form, but it's a start. To support other flag combinations we would need to modify zfs_space() to make it more flexible, or emulate the desired functionality in zpl_fallocate(). Signed-off-by: Brian Behlendorf <[email protected]> Issue #334
* Fix zconfig.sh non-optimal alignmentBrian Behlendorf2012-02-092-56/+67
| | | | | | | | | | | | | | | The recent zvol improvements have changed default suggested alignment for zvols from 512b (default) to 8k (zvol blocksize). Because of this the zconfig.sh tests which create paritions are now generating a warning about non-optimal alignments. This change updates the need zconfig.sh tests such that a partition will be properly aligned. In the process, it shifts from using the sfdisk utility to the parted utility to create partitions. It also moves the creation of labels, partitions, and filesystems in to generic functions in common.sh.in. Signed-off-by: Brian Behlendorf <[email protected]>
* Improve ZVOL queue behavior.Etienne Dechamps2012-02-075-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <[email protected]>
* Fix synchronicity for ZVOLs.Etienne Dechamps2012-02-075-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <[email protected]>
* Linux 3.3 compat, sops->show_options()Brian Behlendorf2012-02-035-0/+5
| | | | | | | | | | The second argument of sops->show_options() was changed from a 'struct vfsmount *' to a 'struct dentry *'. Add an autoconf check to detect the API change and then conditionally define the expected interface. In either case we are only interested in the zfs_sb_t. Signed-off-by: Brian Behlendorf <[email protected]> Closes #549
* Linux 3.1 compat, super_block->s_shrinkBrian Behlendorf2012-01-115-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <[email protected]> Closes #466 Closes #292
* Linux 3.2 compat: set_nlink()Darik Horn2011-12-165-0/+5
| | | | | | | | | | | Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170 Use the new set_nlink() kernel function instead. Signed-off-by: Brian Behlendorf <[email protected]> Closes: #462
* Add make rule for building Arch Linux packagesPrakash Surya2011-12-145-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #491
* Simplify BDI integrationBrian Behlendorf2011-11-085-0/+5
| | | | | | | | | | | | | | Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <[email protected]> Closes #367
* Disable 90-zfs.rules for test suitezfs-0.6.0-rc6Brian Behlendorf2011-10-114-0/+25
| | | | | | | | | | | | When running the zconfig.sh, zpios-sanity.sh, and zfault.sh from the installed packages the 90-zfs.rules can cause failures. These will occur because the test suite assumes it has full control over loading/unloading the module stack. If the stack gets asynchronously loaded by the udev rule the test suite will treat it as a failure. Resolve the issue by disabling the offending rule during the tests and enabling it on exit. Signed-off-by: Brian Behlendorf <[email protected]>
* Autogen refresh for udev changesBrian Behlendorf2011-08-085-0/+15
| | | | | | | | Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
* Add backing_device_info per-filesystemBrian Behlendorf2011-08-045-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <[email protected]> Closes #174
* Provide a rc.d script for archlinuxzfs-0.6.0-rc5Kyle Fuller2011-07-115-0/+5
| | | | | | | | | | | Unlike most other Linux distributions archlinux installs its init scripts in /etc/rc.d insead of /etc/init.d. This commit provides an archlinux rc.d script for zfs and extends the build infrastructure to ensure it get's installed in the correct place. Signed-off-by: Brian Behlendorf <[email protected]> Closes #322
* Linux compat 2.6.39: mount_nodev()Brian Behlendorf2011-07-015-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
* Linux compat 2.6.39: security_inode_init_security()Brian Behlendorf2011-07-015-0/+5
| | | | | | | | | | | The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
* Tear down and flush the mmap regionPrasad Joshi2011-06-275-0/+5
| | | | | | | | | | | | | | The inode eviction should unmap the pages associated with the inode. These pages should also be flushed to disk to avoid the data loss. Therefore, use truncate_setsize() in evict_inode() to release the pagecache. The API truncate_setsize() was added in 2.6.35 kernel. To ensure compatibility with the old kernel, the patch defines its own truncate_setsize function. Signed-off-by: Prasad Joshi <[email protected]> Closes #255
* Always check -Wno-unused-but-set-variable gcc supportBrian Behlendorf2011-06-145-5/+5
| | | | | | | | | | | The previous commit 8a7e1ceefa430988c8f888ca708ab307333b4464 wasn't quite right. This check applies to both the user and kernel space build and as such we must make sure it runs regardless of what the --with-config option is set too. For example, if --with-config=kernel then the autoconf test does not run and we generate build warnings when compiling the kernel packages.
* Check for -Wno-unused-but-set-variable gcc supportBrian Behlendorf2011-06-145-0/+10
| | | | | | | | | | | | | Gcc versions 4.3.2 and earlier do not support the compiler flag -Wno-unused-but-set-variable. This can lead to build failures on older Linux platforms such as Debian Lenny. Since this is an optional build argument this changes add a new autoconf check for the option. If it is supported by the installed version of gcc then it is used otherwise it is omited. See commit's 12c1acde76683108441827ae9affba1872f3afe5 and 79713039a2b6e0ed223d141b4a8a8455f282d2f2 for the reason the -Wno-unused-but-set-variable options was originally added.
* Add default stack checkingBrian Behlendorf2011-06-132-0/+28
| | | | | | | | | | | | | | | When your kernel is built with kernel stack tracing enabled and you have the debugfs filesystem mounted. Then the zfs.sh script will clear the worst observed kernel stack depth on module load and check the worst case usage on module removal. If the stack depth ever exceeds 7000 bytes the full stack will be printed for debugging. This is dangerously close to overrunning the default 8k stack. This additional advisory debugging is particularly valuable when running the regression tests on a kernel built with 16k stacks. In this case, almost no matter how bad the stack overrun is you will see be able to get a clean stack trace for debugging. Since the worst case stack usage can be highly variable it's helpful to always check the worst case usage.
* Pass -f option for importBrian Behlendorf2011-06-101-1/+1
| | | | | | | | If a pool was not cleanly exported passing the -f flag may be required at 'zpool import' time. Since this test is simply validating that the pool can be successfully imported in the absense of the cache file always pass the -f to ensure it succeeds. This failure was observed under RHEL6.1.
* Sanatize zpios-sanity.sh environmentBrian Behlendorf2011-06-031-0/+7
| | | | | | | | | | Just like zconfig.sh the zpios-sanity.sh tests should run in a sanatized environment. This ensures they never conflict with an installed /etc/zfs/zpool.cache file. This commit additionally improves the -c cleanup option. It now removes the modules stack if loaded and destroys relevant md devices. This behavior is now identical to zconfig.sh.
* Delay before destroying loopback devicesBrian Behlendorf2011-06-034-0/+12
| | | | | | | | | | Generally I don't approve of just adding an arbitrary delay to avoid a problem but in this case I'm going to let it slide. We may need to delay briefly after 'zpool destroy' returns to ensure the loopback devices are closed. If they aren't closed than losetup -d will not be able to destroy them. Unfortunately, there's no easy state the check so we'll have to make due with a simple delay.
* Always unload zpios.ko on exitBrian Behlendorf2011-06-021-2/+11
| | | | | | | | We should always unload zpios.ko on exit. This ensures that subsequent calls to 'zfs.sh -u' from other utilities will be able to unload the module stack and properly cleanup. This is important for the the --cleanup option which can be passed to zconfig.sh and zfault.sh.
* Fix zpios-sanity.sh return codeBrian Behlendorf2011-06-021-1/+4
| | | | | | The zpios-sanity.sh script should return failure when any of the individual zpios.sh tests fail. The previous code would always return success suppressing real failures.
* Fix 'zfs set volsize=N pool/dataset'Brian Behlendorf2011-05-025-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change fixes a kernel panic which would occur when resizing a dataset which was not open. The objset_t stored in the zvol_state_t will be set to NULL when the block device is closed. To avoid this issue we pass the correct objset_t as the third arg. The code has also been updated to correctly notify the kernel when the block device capacity changes. For 2.6.28 and newer kernels the capacity change will be immediately detected. For earlier kernels the capacity change will be detected when the device is next opened. This is a known limitation of older kernels. Online ext3 resize test case passes on 2.6.28+ kernels: $ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023 $ zpool create tank /tmp/zvol $ zfs create -V 500M tank/zd0 $ mkfs.ext3 /dev/zd0 $ mkdir /mnt/zd0 $ mount /dev/zd0 /mnt/zd0 $ df -h /mnt/zd0 $ zfs set volsize=800M tank/zd0 $ resize2fs /dev/zd0 $ df -h /mnt/zd0 Original-patch-by: Fajar A. Nugraha <[email protected]> Closes #68 Closes #84
* Implemented NFS export_operations.Gunnar Beutner2011-04-295-0/+5
| | | | | Implemented the required NFS operations for exporting ZFS datasets using the in-kernel NFS daemon.
* Update zconfig.sh to use new zvol namesBrian Behlendorf2011-04-191-82/+99
| | | | | | | | | | | | | | | | | | | This change should have occured when we commited the new udev rules for zvols. Basically, the test script is just out of date. We need to update it to use the /dev/zvol/ device names, and to expect the more common -partN suffixes. I added a udev_trigger() call in zconfig_partition() and zconfig_zvol_device_stat() to ensure that all the udev rules have run before. This ensures the devices are available to subsequent commands and closes a small race. Finally, I was forced added a small 'sleep 1' to test 10. I was observing occassional failures in my VM due to the device still claiming to be busy. Delaying betwen the various methods of adding/removing a vdev avoids the issue. Closes #207
* Call udevadm trigger more safelyNed Bass2011-04-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Some udev hooks are not designed to be idempotent, so calling udevadm trigger outside of the distribution's initialization scripts can have unexpected (and potentially dangerous) side effects. For example, the system time may change or devices may appear multiple times. See Ubuntu launchpad bug 320200 and this mailing list post for more details: https://lists.ubuntu.com/archives/ubuntu-devel/2009-January/027260.html To avoid these problems we call udevadm trigger with --action=change --subsystem-match=block. The first argument tells udev just to refresh devices, and make sure everything's as it should be. The second argument limits the scope to block devices, so devices belonging to other subsystems cannot be affected. This doesn't fix the problem on older udev implementations that don't provide udevadm but instead have udevtrigger as a standalone program. In this case the above options aren't available so there's no way to call call udevtrigger safely. But we can live with that since this issue only exists in optional test and helper scripts, and most zfs-on-linux users are running newer systems anyways.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 05:48:50 +0000