aboutsummaryrefslogtreecommitdiffstats
path: root/module
Commit message (Collapse)AuthorAgeFilesLines
* Report pool suspended due to MMPOlaf Faaland2018-03-154-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | When the pool is suspended, record whether it was due to an I/O error or due to MMP writes failing to succeed within the required time. Change spa_suspended from uint8_t to zio_suspend_reason_t to store the reason. When userspace queries pool status via spa_tryimport(), report the reason the pool was suspended in a new key, ZPOOL_CONFIG_SUSPENDED_REASON. In libzfs, when interpreting the returned config nvlist, report suspension due to MMP with a new pool status enum value, ZPOOL_STATUS_IO_FAILURE_MMP. In status_callback(), which generates and emits the message when 'zpool status' is executed, add a case to print an appropriate message for the new pool status enum value. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7296
* SHA256 QAT accelerationTom Caputi2018-03-155-27/+235
| | | | | | | | | | | | This patch enables acceleration of SHA256 checksums using Intel Quick Assist Technology. This patch also fixes up and refactors some of the code from QAT encryption to make the behavior consistent. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chengfeix Zhu <[email protected]> Signed-off-by: Weigang Li <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7295
* receive_spill does not byte swap spill contentsPaul Zuchowski2018-03-151-0/+9
| | | | | | | | | In zfs receive, the function receive_spill should account for spill block endian conversion as a defensive measure. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tom Caputi <[email protected]> Signed-off-by: Paul Zuchowski <[email protected]> Closes #7300
* OpenZFS 9188 - increase size of dbuf cache to reduce indirect block ↵Brian Behlendorf2018-03-131-11/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | decompression With compressed ARC (bug 6950) we use up to 25% of our CPU to decompress indirect blocks, under a workload of random cached reads. To reduce this decompression cost, we would like to increase the size of the dbuf cache so that more indirect blocks can be stored uncompressed. If we are caching entire large files of recordsize=8K, the indirect blocks use 1/64th as much memory as the data blocks (assuming they have the same compression ratio). We suggest making the dbuf cache be 1/32nd of all memory, so that in this scenario we should be able to keep all the indirect blocks decompressed in the dbuf cache. (We want it to be more than the 1/64th that the indirect blocks would use because we need to cache other stuff in the dbuf cache as well.) In real world workloads, this won't help as dramatically as the example above, but we think it's still worth it because the risk of decreasing performance is low. The potential negative performance impact is that we will be slightly reducing the size of the ARC (by ~3%). Porting Notes: * Added modules options to zfs-module-parameters.5 man page. * Preserved scaling based on target ARC size rather than max ARC size. Authored by: George Wilson <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Prashanth Sreenivasa <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/9188 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/564 Upstream bug: DLPX-46942 Closes #7273
* Add kernel module auto-loadingBrian Behlendorf2018-03-131-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically a dynamic misc minor number was registered for the /dev/zfs device in order to prevent minor number collisions. This was fine but it prevented us from being able to use the kernel module auto-loaded which requires a known reserved value. Resolve this issue by adding a configure test to find an available misc minor number which can then be used in MODULE_ALIAS_MISCDEV at build time. By adding this alias the zfs kmod is added to the list of known static-nodes and the systemd-tmpfiles-setup-dev service will create a /dev/zfs character device at boot time. This in turn allows us to update the 90-zfs.rules file to make it aware this is a static node. The upshot of this is that whenever a process (zpool, zfs, zed) opens the /dev/zfs the kmods will be automatic loaded. This even works for unprivileged users so there is no longer a need to manually load the modules at boot time. As an additional bonus the zed now no longer needs to start after the zfs-import.service since it will trigger the module load. In the unlikely event the minor number we selected conflicts with another out of tree unregistered minor number the code falls back to dynamically allocating it. In this case the modules again must be manually loaded. Note that due to the change in the method of registering the minor number the zimport.sh test case may incorrectly fail when the static node for the installed packages is created instead of the dynamic one. This issue will only transiently impact zimport.sh for this single commit when we transition and are mixing and matching methods. Reviewed-by: Fabian Grünbichler <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> TEST_ZIMPORT_SKIP="yes" Closes #7287
* Add zfs_scan_ignore_errors tunableTim Chase2018-03-131-0/+16
| | | | | | | | | When it's set, a DTL range will be cleared even if its scan/scrub had errors. This allows to work around resilver/scrub upon import when the pool has errors. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tim Chase <[email protected]> Closes #7293
* Fix race in trace point in zrl_add_implChunwei Chen2018-03-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We hit an illegal memory access in the zrlock trace point. The problem is that zrl->zr_owner and zrl->zr_caller are assigned locklessly. And if zrl->zr_owner got assigned a longer string between when __string() calculate the strlen, and when __assign_str() does strcpy. The copy will overflow the buffer. == For example: Initial condition: zrl->zr_owner = A zrl->zr_caller = "abc" Thread A Thread B ------------------------------------------------- if (zrl->zr_owner == A) { DTRACE_PROBE2() { __string() { strlen(zrl->zr_caller) -> 3 allocate buf[4] } zrl->zr_owner = B zrl->zr_caller = "abcd" __assign_str() { strcpy(buf, zrl->zr_caller) <- buffer overflow == Dereferencing zrl->zr_owner->pid may also be problematic, in that the zrl->zr_owner got changed to other task, and that task exits, freeing the task_struct. This should be very unlikely, as the other task need to zrl_remove and exit between the dereferencing zr->zr_owner and zr->zr_owner->pid. Nevertheless, we'll deal with it as well. To fix the zrl->zr_caller issue, instead of copy the string content, we just copy the pointer, this is safe because it always points to __func__, which is static. As for the zrl->zr_owner issue, we pass in curthread instead of using zrl->zr_owner. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #7291
* Fix MMP write frequency for large poolsBrian Behlendorf2018-03-121-3/+3
| | | | | | | | | | | | | | | | | | | When a single pool contains more vdevs than the CONFIG_HZ for for the kernel the mmp thread will not delay properly. Switch to using cv_timedwait_sig_hires() to handle higher resolution delays. This issue was reported on Arch Linux where HZ defaults to only 100 and this could be fairly easily reproduced with a reasonably large pool. Most distribution kernels set CONFIG_HZ=250 or CONFIG_HZ=1000 and thus are unlikely to be impacted. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7205 Closes #7289
* Hold SCL_VDEV when counting leavesOlaf Faaland2018-03-091-1/+7
| | | | | | | | | | | | A config lock should be held while vdev_count_leaves() walks the tree, otherwise the pointers reference may become invalid during the walk. SCL_VDEV is a minimal lock provided for such uses cases. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7286
* Handle zio_resume and mmp => offOlaf Faaland2018-03-091-4/+10
| | | | | | | | | | | | | | | When multihost is disabled on a pool, and the pool is resumed via zpool clear, within a single cycle of the mmp thread's loop (e.g. while it's in the cv_timedwait call), both mmp_last_write and mmp_delay should be updated. The original code mistakenly treated the two cases as if they could not occur at the same time. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7286
* QAT support for AES-GCMTom Caputi2018-03-099-229/+755
| | | | | | | | | | This patch adds support for acceleration of AES-GCM encryption with Intel Quick Assist Technology. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chengfeix Zhu <[email protected]> Signed-off-by: Weigang Li <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7282
* Take user namespaces into account in policy checksWolfgang Bumiller2018-03-071-7/+59
| | | | | | | | | | | | | | | | | | | | | | | | | Change file related checks to use user namespaces and make sure involved uids/gids are mappable in the current namespace. Note that checks without file ownership information will still not take user namespaces into account, as some of these should be handled via 'zfs allow' (otherwise root in a user namespace could issue commands such as `zpool export`). This also adds an initial user namespace regression test for the setgid bit loss, with a user_ns_exec helper usable in further tests. Additionally, configure checks for the required user namespace related features are added for: * ns_capable * kuid/kgid_has_mapping() * user_ns in cred_t Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Wolfgang Bumiller <[email protected]> Closes #6800 Closes #7270
* Record skipped MMP writes in multihost_historyOlaf Faaland2018-03-062-40/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once per pass through the MMP thread's loop, the vdev tree is walked to find a suitable leaf to write the next MMP block to. If no such leaf is found, the thread sleeps for a while and resumes at the top of the loop. Add an entry to multihost_history when no leaf can be found, and record the reason in the error column. The error code for such entries is a bitfield, displayed in hex: 0x1 At least one vdev (interior or leaf) was not writeable. 0x2 At least one writeable leaf vdev was found, but it had a pending MMP write. timestamp = the time in seconds since the epoch when no leaf could be found originally. duration = the time (in ns) during which no MMP block was written for this reason. This does not include the preceeding inter-write period nor the following inter-write period. vdev_guid = the number of sequential cycles of the MMP thread looop when this occurred. Sample output, truncated to fit: For records of skipped MMP writes the right-most column, vdev_path, is reported as "-". id txg timestamp error duration mmp_delay vdev_guid ... 936 11 1520036441 0 146264 891422313 1740883117838 ... 937 11 1520036441 0 163956 888356657 7320395061548 ... 938 11 1520036442 0 130690 885314969 7320395061548 ... 939 11 1520036442 0 2001068577 882296582 1740883117838 ... 940 11 1520036443 0 161806 882296582 7320395061548 ... 941 11 1520036443 0x2 0 998020546 1 ... 942 11 1520036444 0 136585 998020546 7320395061548 ... 943 11 1520036444 0x2 0 998020257 1 ... 944 11 1520036445 5 2002662964 994160219 1740883117838 ... 945 11 1520036445 0x2 998073118 994160219 3 ... 946 11 1520036447 0 247136 994160219 7320395061548 ... Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7212
* Detect long config lock acquisition in mmpOlaf Faaland2018-03-061-0/+6
| | | | | | | | | | | | | | If something holds the config lock as a writer for too long, MMP will fail to issue MMP writes in a timely manner. This will result either in the pool being suspended, or in an extreme case, in the pool not being protected. If the time to acquire the config lock exceeds 1/10 of the minimum zfs_multihost_interval, report it in the zfs debug log. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7212
* Misc fixes and cleanup for project quotaNasf-Fan2018-03-052-3/+5
| | | | | | | | | | | | | | | | | | | | | | | 1) The Coverity Scan reports some issues for the project quota patch, including: 1.1) zfs_prop_get_userquota() directly uses the const quota type value as the condition check by wrong. 1.2) dmu_objset_userquota_get_ids() may cause dnode::dn_newgid to be overwritten by dnode::dn->dn_oldprojid. 2) This patch fixes related issues. It also enhances the logic for zfs_project_item_alloc() to avoid buffer overflow. 3) Skip project quota ability check if does not change project quota related things (id or flag). Otherwise, it will cause chattr (for other non project quota flags) operation failed if project quota disabled. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Fan Yong <[email protected]> Closes #7251 Closes #7265
* Linux 4.16 compat: get_disk_and_module()Giuseppe Di Natale2018-03-051-1/+1
| | | | | | | | | | As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk() is now get_disk_and_module(). Add a configure check to determine if we need to use get_disk_and_module(). Reviewed-by: loli10K <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Giuseppe Di Natale <[email protected]> Closes #7264
* Change checksum & IO delay ratelimit valuesTony Hutter2018-03-042-4/+23
| | | | | | | | | | | | | | | | Change checksum & IO delay ratelimit thresholds from 5/sec to 20/sec. This allows zed to actually trigger if a bunch of these events arrive in a short period of time (zed has a threshold of 10 events in 10 sec). Previously, if you had, say, 100 checksum errors in 1 sec, it would get ratelimited to 5/sec which wouldn't trigger zed to fault the drive. Also, convert the checksum and IO delay thresholds to module params for easy testing. Reviewed-by: loli10K <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #7252
* Increment zil_itx_needcopy_bytes properlychrisrd2018-03-021-2/+1
| | | | | | | | | | | | | | | | | In zil_lwb_commit() with TX_WRITE, we copy the log write record (lrw) into the log write block (lwb) and send it off using zil_lwb_add_txg(). If we also have WR_NEED_COPY, we additionally copy the lwr's data into the lwb to be sent off. If the lwr + data doesn't fit into the lwb, we send the lrw and as much data as will fit (dnow bytes), then go back and do the same with the remaining data. Each time through this loop we're sending dnow data bytes. I.e. zil_itx_needcopy_bytes should be incremented by dnow. Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chris Dunlop <[email protected]> Closes #6988 Closes #7176
* Raw DRR_OBJECT records must write raw dataTom Caputi2018-02-273-53/+69
| | | | | | | | | | | | | | | | | | | | | | b1d21733 made it possible for empty metadnode blocks to be compressed to a hole, fixing a bug that would cause invalid metadnode MACs when a send stream attempted to free objects and allowing the blocks to be reclaimed when they were no longer needed. However, this patch also introduced a race condition; if a txg sync occurred after a DRR_OBJECT_RANGE record was received but before any objects were added, the metadnode block would be compressed to a hole and lose all of its encryption parameters. This would cause subsequent DRR_OBJECT records to fail when they attempted to write their data into an unencrypted block. This patch defers the DRR_OBJECT_RANGE handling to receive_object() so that the encryption parameters are set with each object that is written into that block. Reviewed-by: Kash Pande <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7215 Closes #7236
* Fix free memory calculation on v3.14+chrisrd2018-02-231-17/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide infrastructure to auto-configure to enum and API changes in the global page stats used for our free memory calculations. arc_free_memory has been broken since an API change in Linux v3.14: 2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node 2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node vmstats These commits moved some of global_page_state() into global_node_page_state(). The API change was particularly egregious as, instead of breaking the old code, it silently did the wrong thing and we continued using global_page_state() where we should have been using global_node_page_state(), thus indexing into the wrong array via NR_SLAB_RECLAIMABLE et al. There have been further API changes along the way: 2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to node counters 2017-09-06 v4.14 c41f012a mm: rename global_page_state to global_zone_page_state ...and various (incomplete, as it turns out) attempts to accomodate these changes in ZoL: 2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats 2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc 2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc The config infrastructure provided here resolves these issues going back to the original API change in v3.14 and is robust against further Linux changes in this area. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Chris Dunlop <[email protected]> Closes #7170
* Report duration and error in mmp_history entriesOlaf Faaland2018-02-222-12/+55
| | | | | | | | | | | | | | | | | | | | | | After an MMP write completes, update the relevant mmp_history entry with the time between submission and completion, and the error status of the write. [faaland1@toss3a zfs]$ cat /proc/spl/kstat/zfs/pool/multihost 39 0 0x01 100 8800 69147946270893 72723903122926 id txg timestamp error duration mmp_delay vdev_guid 10607 1166 1518985089 0 138301 637785455 4882... 10608 1166 1518985089 0 136154 635407747 1151... 10609 1166 1518985089 0 803618560 633048078 9740... 10610 1166 1518985090 0 144826 633048078 4882... 10611 1166 1518985090 0 164527 666187671 1151... Where duration = gethrtime_in_done_fn - gethrtime_at_submission, and error = zio->io_error. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7190
* Do not initiate MMP writes while pool is suspendedOlaf Faaland2018-02-221-1/+1
| | | | | | | | | | | While the pool is suspended on host A, it may be imported on host B. If host A continued to write MMP blocks, it would be blindly overwriting MMP blocks written by host B, and the blocks written by host A would have outdated txg information. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7182
* Fix bounds check in zio_crypt_do_objset_hmacsTom Caputi2018-02-221-4/+8
| | | | | | | | | | | | The current bounds check in zio_crypt_do_objset_hmacs() does not properly handle the possible sizes of the objset_phys_t and can therefore read outside the buffer's memory. If that memory happened to match what the check was actually looking for, the objset would fail to be owned, complaining that the MAC was invalid. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7210
* OpenZFS 9035 - zfs: this statement may fall throughToomas Soome2018-02-214-2/+4
| | | | | | | | | | | | | Authored by: Toomas Soome <[email protected]> Reviewed by: Yuri Pankov <[email protected]> Reviewed by: Andy Fiddaman <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/9035 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/46ac8fdfc5 Closes #7206
* Raw receive should change key atomicallyTom Caputi2018-02-212-218/+280
| | | | | | | | | | | | | | | | | Currently, raw zfs sends transfer the encrypted master keys and objset_phys_t encryption parameters in the DRR_BEGIN payload of each send file. Both of these are processed as soon as they are read in dmu_recv_stream(), meaning that the new keys are set before the new snapshot is received. In addition to the fact that this changes the user's keys for the dataset earlier than they might expect, the keys were never reset to what they originally were in the event that the receive failed. This patch splits the processing into objset handling and key handling, the later of which is moved to dmu_recv_end() so that they key change can be done atomically. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7200
* Prevent raw zfs recv -F if dataset is unencryptedTom Caputi2018-02-211-1/+9
| | | | | | | | | | | | | | | | | | | | | | The current design of ZFS encryption only allows a dataset to have one DSL Crypto Key at a time. As a result, it is important that the zfs receive code ensures that only one key can be in use at a time for a given DSL Directory. zfs receive -F complicates this, since the new dataset is received as a clone of the existing one so that an atomic switch can be done at the end. To prevent confusion about which dataset is actually encrypted a check was added to ensure that encrypted datasets cannot use zfs recv -F to completely replace existing datasets. Unfortunately, the check did not take into account unencrypted datasets being overriden by encrypted ones as a case. Along the same lines, the code also failed to ensure that raw recieves could not be done on top of existing unencrypted datasets, which causes amny problems since the new stream cannot be decrypted. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7199
* Raw receives must compress metadnode blocksTom Caputi2018-02-214-17/+24
| | | | | | | | | | | | | | | | | | | Currently, the DMU relies on ZIO layer compression to free LO dnode blocks that no longer have objects in them. However, raw receives disable all compression, meaning that these blocks can never be freed. In addition to the obvious space concerns, this could also cause incremental raw receives to fail to mount since the MAC of a hole is different from that of a completely zeroed block. This patch corrects this issue by adding a special case in zio_write_compress() which will attempt to compress these blocks to a hole even if ZIO_FLAG_RAW_ENCRYPT is set. This patch also removes the zfs_mdcomp_disable tunable, since tuning it could cause these same issues. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7198
* Remove unnecessary txg syncs from receive_object()Tom Caputi2018-02-211-1/+6
| | | | | | | | | | | | 1b66810b introduced serveral changes which improved the reliability of zfs sends when large dnodes were involved. However, these fixes required adding a few calls to txg_wait_synced() in the DRR_OBJECT handling code. Although most of them are currently necessary, this patch allows the code to continue without waiting in some cases where it doesn't have to. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7197
* Add omitted set for os->os_next_write_rawTom Caputi2018-02-211-1/+4
| | | | | | | | | | | This one line patch adds adds a set to os->os_next_write_raw that was omitted when the code was updated in 1b66810. Without it, the code (in some instances) could attempt to write raw encrypted data as regular unencrypted data without the keys being loaded, triggering an ASSERT in zio_encrypt(). Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7196
* ZIL claiming should not start user accountingTom Caputi2018-02-204-37/+43
| | | | | | | | | | | | | | | | | | | | Currently, ZIL claiming dirties objsets which causes dsl_pool_sync() to attempt to perform user accounting on them. This causes problems for encrypted datasets that were raw received before the system went offline since they cannot perform user accounting until they have their keys loaded. This triggers an ASSERT in zio_encrypt(). Since encryption was added, the code now depends on the fact that data should only be written when objsets are owned. This patch adds a check in dmu_objset_do_userquota_updates() to ensure that useraccounting is only done when the objsets are actually owned for write. As part of this work, the zfsvfs and zvol code was updated so that it no longer lies about owning objsets readonly. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #6916 Closes #7163
* Fix coverity defects: zfs channel programsDon Brady2018-02-2012-16/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CID 173243, 173245: Memory - corruptions (OVERRUN) Added size argument to lcompat_sprintf() to avoid use of INT_MAX CID 173244: Integer handling issues (OVERFLOW_BEFORE_WIDEN) Added cast to uint64_t to avoid a 32 bit overflow warning CID 173242: Integer handling issues (CONSTANT_EXPRESSION_RESULT) Conditionally removed unused luai_numisnan() floating point check CID 173241: Resource leaks (RESOURCE_LEAK) Added missing close(fd) on error path CID 173240: (UNINIT) Fixed uninitialized variable in get_special_prop() CID 147560: Null pointer dereferences (NULL_RETURNS) Cleaned up bad code merge in dsl_dataset_promote_check() CID 28475: Memory - illegal accesses (OVERRUN) Fixed lcompat_sprintf() to use a size paramater CID 28418, 28422: Error handling issues (CHECKED_RETURN) Added function result cast to (void) to avoid warning CID 23935, 28411, 28412: Memory - corruptions (ARRAY_VS_SINGLETON) Added casts to avoid exposing result as an array Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #7181
* Project dnode should be protected by local MACTom Caputi2018-02-201-12/+26
| | | | | | | | | | | | This patch corrects a small security issue with 9c5167d1. When the project dnode was added to the objset_phys_t, it was not included in the local MAC for cryptographic protection, allowing an attacker to modify this data without the consent of the key holder. This patch does represent an on-disk format change for anyone using project dnodes on an encrypted dataset. Signed-off-by: Tom Caputi <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7177
* Address objtool check failures in lua moduleDon Brady2018-02-151-1/+3
| | | | | | | | | | | | The use of void __attribute__((noreturn)) in kernel builds was causing lots of warnings if CONFIG_STACK_VALIDATION is active. For now we just remove this attribute to achieve clean builds for the Lua module. There was no significant increase in the time to run the full channel_program ZTS tests. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #7173
* OpenZFS 8857 - zio_remove_child() panic due to already destroyed parent zioGeorge Wilson2018-02-141-20/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM ======= It's possible for a parent zio to complete even though it has children which have not completed. This can result in the following panic: > $C ffffff01809128c0 vpanic() ffffff01809128e0 mutex_panic+0x58(fffffffffb94c904, ffffff597dde7f80) ffffff0180912950 mutex_vector_enter+0x347(ffffff597dde7f80) ffffff01809129b0 zio_remove_child+0x50(ffffff597dde7c58, ffffff32bd901ac0, ffffff3373370908) ffffff0180912a40 zio_done+0x390(ffffff32bd901ac0) ffffff0180912a70 zio_execute+0x78(ffffff32bd901ac0) ffffff0180912b30 taskq_thread+0x2d0(ffffff33bae44140) ffffff0180912b40 thread_start+8() > ::status debugging crash dump vmcore.2 (64-bit) from batfs0390 operating system: 5.11 joyent_20170911T171900Z (i86pc) image uuid: (not set) panic message: mutex_enter: bad mutex, lp=ffffff597dde7f80 owner=ffffff3c59b39480 thread=ffffff0180912c40 dump content: kernel pages only The problem is that dbuf_prefetch along with l2arc can create a zio tree which confuses the parent zio and allows it to complete with while children still exist. Here's the scenario: zio tree: pio |--- lio The parent zio, pio, has entered the zio_done stage and begins to check its children to see there are still some that have not completed. In zio_done(), the children are checked in the following order: zio_wait_for_children(zio, ZIO_CHILD_VDEV, ZIO_WAIT_DONE) zio_wait_for_children(zio, ZIO_CHILD_GANG, ZIO_WAIT_DONE) zio_wait_for_children(zio, ZIO_CHILD_DDT, ZIO_WAIT_DONE) zio_wait_for_children(zio, ZIO_CHILD_LOGICAL, ZIO_WAIT_DONE) If pio, finds any child which has not completed then it stops executing and goes to sleep. Each call to zio_wait_for_children() will grab the io_lock while checking the particular child. In this scenario, the pio has completed the first call to zio_wait_for_children() to check for any ZIO_CHILD_VDEV children. Since the only zio in the zio tree right now is the logical zio, lio, then it completes that call and prepares to check the next child type. In the meantime, the lio completes and in its callback creates a child vdev zio, cio. The zio tree looks like this: zio tree: pio |--- lio |--- cio The lio then grabs the parent's io_lock and removes itself. zio tree: pio |--- cio The pio continues to run but has already completed its check for ZIO_CHILD_VDEV and will erroneously complete. When the child zio, cio, completes it will panic the system trying to reference the parent zio which has been destroyed. SOLUTION ======== The fix is to rework the zio_wait_for_children() logic to accept a bitfield for all the children types that it's interested in checking. The io_lock will is held the entire time we check all the children types. Since the function now accepts a bitfield, a simple ZIO_CHILD_BIT() macro is provided to allow for the conversion between a ZIO_CHILD type and the bitfield used by the zio_wiat_for_children logic. Authored by: George Wilson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Andriy Gapon <[email protected]> Reviewed by: Youzhong Yang <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8857 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/862ff6d99c Issue #5918 Closes #7168
* Project Quota on ZFSNasf-Fan2018-02-1322-216/+1191
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by Ned Bass <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Fan Yong <[email protected]> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
* mmp should use a fixed tag for spa_config lockssanjeevbagewadi2018-02-121-2/+3
| | | | | | | | | | | mmp_write_uberblock() and mmp_write_done() should the same tag for spa_config_locks. Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Signed-off-by: Sanjeev Bagewadi <[email protected]> Closes #6530 Closes #7155
* OpenZFS 8520 - lzc_rollbackAndriy Gapon2018-02-092-10/+50
| | | | | | | | | | | | | | | | | | | | | | 8520 lzc_rollback_to should support rolling back to origin 7198 libzfs should gracefully handle EINVAL from lzc_rollback lzc_rollback_to() should support rolling back to a clone's origin. The current checks in zfs_ioc_rollback() would not allow that because the origin snapshot belongs to a different filesystem. The overly restrictive check was in introduced in 7600, but it was not a regression as none of the existing tools provided a way to rollback to the origin. Authored by: Andriy Gapon <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8520 OpenZFS-issue: https://www.illumos.org/issues/7198 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/78a5a1a25a Closes #7150
* Handle zap_add() failures in mixed case modesanjeevbagewadi2018-02-095-27/+141
| | | | | | | | | | | | | | With "casesensitivity=mixed", zap_add() could fail when the number of files/directories with the same name (varying in case) exceed the capacity of the leaf node of a Fatzap. This results in a ASSERT() failure as zfs_link_create() does not expect zap_add() to fail. The fix is to handle these failures and rollback the transactions. Reviewed by: Matt Ahrens <[email protected]> Reviewed-by: Chunwei Chen <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Sanjeev Bagewadi <[email protected]> Closes #7011 Closes #7054
* Fix zle_decompress out of bound accessChunwei Chen2018-02-091-0/+4
| | | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: loli10K <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #7099
* Fix zdb -c traverse stop on damaged objset rootChunwei Chen2018-02-091-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a corruption happens to be on a root block of an objset, zdb -c will not correctly report the error, and it will not traverse the datasets that come after. This is because traverse_visitbp, which does the callback and reset error for TRAVERSE_HARD, is skipped when traversing zil is failed in traverse_impl. Here's example of what 'zdb -eLcc' command looks like on a pool with damaged objset root: == before patch: Traversing all blocks to verify checksums ... Error counts: errno count block traversal size 379392 != alloc 33987072 (unreachable 33607680) bp count: 172 ganged count: 0 bp logical: 1678336 avg: 9757 bp physical: 130560 avg: 759 compression: 12.85 bp allocated: 379392 avg: 2205 compression: 4.42 bp deduped: 0 ref>1: 0 deduplication: 1.00 SPA allocated: 33987072 used: 0.80% additional, non-pointer bps of type 0: 71 Dittoed blocks on same vdev: 101 == after patch: Traversing all blocks to verify checksums ... zdb_blkptr_cb: Got error 52 reading <54, 0, -1, 0> -- skipping Error counts: errno count 52 1 block traversal size 33963520 != alloc 33987072 (unreachable 23552) bp count: 447 ganged count: 0 bp logical: 36093440 avg: 80745 bp physical: 33699840 avg: 75391 compression: 1.07 bp allocated: 33963520 avg: 75981 compression: 1.06 bp deduped: 0 ref>1: 0 deduplication: 1.00 SPA allocated: 33987072 used: 0.80% additional, non-pointer bps of type 0: 76 Dittoed blocks on same vdev: 115 == Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: loli10K <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #7099
* Linux 4.16 compat: inode_set_iversion()Brian Behlendorf2018-02-081-1/+1
| | | | | | | | | | | | | | | A new interface was added to manipulate the version field of an inode. Add a inode_set_iversion() wrapper for older kernels and use the new interface when available. The i_version field was dropped from the trace point due to the switch to an atomic64_t i_version type. Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7148
* OpenZFS 8677 - Open-Context Channel ProgramsSerapheim Dimitropoulos2018-02-084-59/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Chris Williamson <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> We want to be able to run channel programs outside of synching context. This would greatly improve performance for channel programs that just gather information, as they won't have to wait for synching context anymore. === What is implemented? This feature introduces the following: - A new command line flag in "zfs program" to specify our intention to run in open context. (The -n option) - A new flag/option within the channel program ioctl which selects the context. - Appropriate error handling whenever we try a channel program in open-context that contains zfs.sync* expressions. - Documentation for the new feature in the manual pages. === How do we handle zfs.sync functions in open context? When such a function is found by the interpreter and we are running in open context we abort the script and we spit out a descriptive runtime error. For example, given the script below ... arg = ... fs = arg["argv"][1] err = zfs.sync.destroy(fs) msg = "destroying " .. fs .. " err=" .. err return msg if we run it in open context, we will get back the following error: Channel program execution failed: [string "channel program"]:3: running functions from the zfs.sync submodule requires passing sync=TRUE to lzc_channel_program() (i.e. do not specify the "-n" command line argument) stack traceback: [C]: in function 'destroy' [string "channel program"]:3: in main chunk === What about testing? We've introduced new wrappers for all channel program tests that run each channel program as both (startard & open-context) and expect the appropriate behavior depending on the program using the zfs.sync module. OpenZFS-issue: https://www.illumos.org/issues/8677 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15 Closes #6558
* OpenZFS 8604 - Simplify snapshots unmounting codeSerapheim Dimitropoulos2018-02-082-28/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Andy Stormont <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> Every time we want to unmount a snapshot (happens during snapshot deletion or renaming) we unnecessarily iterate through all the mountpoints in the VFS layer (see zfs_get_vfs). The current patch completely gets rid of that code and changes the approach while keeping the behavior of that code path the same. Specifically, it puts a hold on the dataset/snapshot and gets its vfs resource reference directly, instead of linearly searching for it. If that reference exists we attempt to amount it. With the above change, it became obvious that the nvlist manipulations that we do (add_boolean and add_nvlist) take a significant amount of time ensuring uniqueness of every new element even though they don't have too. Thus, we updated the patch so those nvlists are not trying to enforce the uniqueness of their elements. A more complete analysis of the problem solved by this patch can be found below: https://sdimitro.github.io/post/snap-unmount-perf/ OpenZFS-issue: https://www.illumos.org/issues/8604 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/126118fb
* Increase code coverage for Lua librariesDon Brady2018-02-089-691/+10
| | | | | | | Add test coverage for lua libraries Remove dead code in Lua implementation Signed-off-by: Don Brady <[email protected]>
* OpenZFS 8600 - ZFS channel programs - snapshotChris Williamson2018-02-085-23/+77
| | | | | | | | | | | | | | | | | Authored by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Brad Lewis <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> ZFS channel programs should be able to create snapshots. In addition to the base snapshot functionality, this entails extra logic to handle edge cases which were formerly not possible, such as creating then destroying a snapshot in the same transaction sync. OpenZFS-issue: https://www.illumos.org/issues/8600 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68089b8b
* OpenZFS 8592 - ZFS channel programs - rollbackBrad Lewis2018-02-082-11/+36
| | | | | | | | | | | | | Authored by: Brad Lewis <[email protected]> Reviewed by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> ZFS channel programs should be able to perform a rollback. OpenZFS-issue: https://www.illumos.org/issues/8592 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d46b5ed6
* OpenZFS 8605 - zfs channel programs fix zfs.existsChris Williamson2018-02-081-1/+1
| | | | | | | | | | | | | | | | | Authored by: Chris Williamson <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> zfs.exists() in channel programs doesn't return any result, and should have a man page entry. This patch corrects zfs.exists so that it returns a value indicating if the dataset exists or not. It also adds documentation about it in the man page. OpenZFS-issue: https://www.illumos.org/issues/8605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1e85e111
* OpenZFS 7431 - ZFS Channel ProgramsChris Williamson2018-02-0873-236/+20381
| | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported-by: Don Brady <[email protected]> Ported-by: John Kennedy <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7431 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533 Porting Notes: * The CLI long option arguments for '-t' and '-m' don't parse on linux * Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc * Lua implementation is built as its own module (zlua.ko) * Lua headers consumed directly by zfs code moved to 'include/sys/lua/' * There is no native setjmp/longjump available in stock Linux kernel. Brought over implementations from illumos and FreeBSD * The get_temporary_prop() was adapted due to VFS platform differences * Use of inline functions in lua parser to reduce stack usage per C call * Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
* OpenZFS 8966 - Source file zfs_acl.c, function zfs_aclset_common contains a ↵WHR2018-02-081-1/+1
| | | | | | | | | | | | | | | | use after end of the lifetime of a local variable Authored by: WHR <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Andriy Gapon <[email protected]> Reviewed by: George Melikov <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Richard Lowe <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8966 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95549fcdc Closes #7141
* Remove deprecated zfs_arc_p_aggressive_disableRichard Elling2018-02-071-4/+0
| | | | | | | | | | zfs_arc_p_aggressive_disable is no more. This PR removes docs and module parameters for zfs_arc_p_aggressive_disable. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Richard Elling <[email protected]> Closes #7135
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 06:47:12 +0000