aboutsummaryrefslogtreecommitdiffstats
path: root/module/zfs
Commit message (Collapse)AuthorAgeFilesLines
...
* Remove VERIFY from dsl_dataset_crypt_stats()Tom Caputi2019-07-051-5/+7
| | | | | | | | | | This patch fixes an issue where dsl_dataset_crypt_stats() would VERIFY that it was able to hold the encryption root. This function should instead silently continue without populating the related field in the nvlist, as is the convention for this code. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8976
* Don't activate metaslabs with weight 0Paul Dagnelie2019-07-051-2/+14
| | | | | | | | | | | | | We return ENOSPC in metaslab_activate if the metaslab has weight 0, to avoid activating a metaslab with no space available. For sanity checking, we also assert that there is no free space in the range tree in that case. Reviewed-by: Igor Kozhukhov <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Closes #8968
* Improve "Unable to automount" error message.Paul Zuchowski2019-07-031-2/+3
| | | | | | | | | | Having the mountpoint and dataset name both in the message made it confusing to read. Additionally, convert this to a zfs_dbgmsg rather than sending it to the console. Reviewed-by: Tom Caputi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Zuchowski <[email protected]> Closes #8959
* Fail early on bio corruption confirmed on 5.2-rc1Tomohiro Kusumi2019-07-031-4/+6
| | | | | | | | | | | | | Unable to import zpool with "Large kmem_alloc" warning due to corrupted bio's with invalid # of page vectors. See #8867 for details. Fail early with ENOMEM. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #8867 Closes #8961
* Check b_freeze_cksum under ZFS_DEBUG_MODIFY conditionalBrian Behlendorf2019-07-031-2/+2
| | | | | | | | | | | | The b_freeze_cksum field can only have data when ZFS_DEBUG_MODIFY is set. Therefore, the EQUIV check must be wrapped accordingly. For the same reason the ASSERT in arc_buf_fill() in unsafe. However, since it's largely redundant it has simply been removed. Reviewed-by: George Wilson <[email protected]> Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Igor Kozhukhov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #8979
* Don't use d_path() for automount mount point for chroot'd processTomohiro Kusumi2019-07-021-34/+7
| | | | | | | | | | | | | Chroot'd process fails to automount snapshots due to realpath(3) failure in mount.zfs(8). Construct a mount point path from sb of the ctldir inode and dirent name, instead of from d_path(), so that chroot'd process doesn't get affected by its view of fs. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #8903 Closes #8966
* nopwrites on dmu_sync-ed blocks can result in a panicGeorge Wilson2019-06-281-0/+14
| | | | | | | | | | | | | | | | | After device removal, performing nopwrites on a dmu_sync-ed block will result in a panic. This panic can show up in two ways: 1. an attempt to issue an IOCTL in vdev_indirect_io_start() 2. a failed comparison of zio->io_bp and zio->io_bp_orig in zio_done() To resolve both of these panics, nopwrites of blocks on indirect vdevs should be ignored and new allocations should be performed on concrete vdevs. Reviewed-by: Igor Kozhukhov <[email protected]> Reviewed-by: Pavel Zakharov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Don Brady <[email protected]> Signed-off-by: George Wilson <[email protected]> Closes #8957
* Concurrent small allocation defeats large allocationPaul Dagnelie2019-06-261-49/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the new parallel allocators scheme, there is a possibility for a problem where two threads, allocating from the same allocator at the same time, conflict with each other. There are two primary cases to worry about. First, another thread working on another allocator activates the same metaslab that the first thread was trying to activate. This results in the first thread needing to go back and reselect a new metaslab, even though it may have waited a long time for this metaslab to load. Second, another thread working on the same allocator may have activated a different metaslab while the first thread was waiting for its metaslab to load. Both of these cases can cause the first thread to be significantly delayed in issuing its IOs. The second case can also cause metaslab load/unload churn; because the metaslab is loaded but not fully activated, we never set the selected_txg, which results in the metaslab being immediately unloaded again. This process can repeat many times, wasting disk and cpu resources. This is more likely to happen when the IO of the first thread is a larger one (like a ZIL write) and the other thread is doing a smaller write, because it is more likely to find an acceptable metaslab quickly. There are two primary changes. The first is to always proceed with the allocation when returning from metaslab_activate if we were preempted in either of the ways described in the previous section. The second change is to set the selected_txg before we do the call to activate so that even if the metaslab is not used for an allocation, we won't immediately attempt to unload it. Reviewed by: Jerry Jelinek <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> External-issue: DLPX-61314 Closes #8843
* Avoid extra taskq_dispatch() calls by DMUAlexander Motin2019-06-252-5/+36
| | | | | | | | | | | | | | | DMU sync code calls taskq_dispatch() for each sublist of os_dirty_dnodes and os_synced_dnodes. Since the number of sublists by default is equal to number of CPUs, it will dispatch equal, potentially large, number of tasks, waking up many CPUs to handle them, even if only one or few of sublists actually have any work to do. This change adds check for empty sublists to avoid this. Reviewed by: Sean Eric Fagan <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Closes #8909
* Fix bp_embedded_type enum definitionloli10K2019-06-241-1/+1
| | | | | | | | | | With the addition of BP_EMBEDDED_TYPE_REDACTED in 30af21b0 a couple of codepaths make wrong assumptions and could potentially result in errors. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Chris Dunlop <[email protected]> Reviewed-by: Paul Dagnelie <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #8951
* Remove code for zfs remapMatthew Ahrens2019-06-246-364/+3
| | | | | | | | | | | | | | | | The "zfs remap" command was disabled by 6e91a72fe3ff8bb282490773bd687632f3e8c79d, because it has little utility and introduced some tricky bugs. This commit removes the code for it, the associated ZFS_IOC_REMAP ioctl, and tests. Note that the ioctl and property will remain, but have no functionality. This allows older software to fail gracefully if it attempts to use these, and avoids a backwards incompatibility that would be introduced if we renumbered the later ioctls/props. Reviewed-by: Tom Caputi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #8944
* Fix error message on promoting encrypted datasetTom Caputi2019-06-241-2/+6
| | | | | | | | | This patch corrects the error message reported when attempting to promote a dataset outside of its encryption root. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8905 Closes #8935
* OpenZFS 9425 - channel programs can be interruptedDon Brady2019-06-223-92/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem Statement ================= ZFS Channel program scripts currently require a timeout, so that hung or long-running scripts return a timeout error instead of causing ZFS to get wedged. This limit can currently be set up to 100 million Lua instructions. Even with a limit in place, it would be desirable to have a sys admin (support engineer) be able to cancel a script that is taking a long time. Proposed Solution ================= Make it possible to abort a channel program by sending an interrupt signal.In the underlying txg_wait_sync function, switch the cv_wait to a cv_wait_sig to catch the signal. Once a signal is encountered, the dsl_sync_task function can install a Lua hook that will get called before the Lua interpreter executes a new line of code. The dsl_sync_task can resume with a standard txg_wait_sync call and wait for the txg to complete. Meanwhile, the hook will abort the script and indicate that the channel program was canceled. The kernel returns a EINTR to indicate that the channel program run was canceled. Porting notes: Added missing return value from cv_wait_sig() Authored by: Don Brady <[email protected]> Reviewed by: Sebastien Roy <[email protected]> Reviewed by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Sara Hartse <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> Signed-off-by: Don Brady <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/9425 OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/d0cb1fb926 Closes #8904
* dn_struct_rwlock can not be held in dmu_tx_try_assign()Matthew Ahrens2019-06-221-0/+19
| | | | | | | | | | | | | | | | | The thread calling dmu_tx_try_assign() can't hold the dn_struct_rwlock while assigning the tx, because this can lead to deadlock. Specifically, if this dnode is already assigned to an earlier txg, this thread may need to wait for that txg to sync (the ERESTART case below). The other thread that has assigned this dnode to an earlier txg prevents this txg from syncing until its tx can complete (calling dmu_tx_commit()), but it may need to acquire the dn_struct_rwlock to do so (e.g. via dmu_buf_hold*()). This commit adds an assertion to dmu_tx_try_assign() to ensure that this deadlock is not inadvertently introduced. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #8929
* Add SCSI_PASSTHROUGH to zvols to enable UNMAP supportPaul Dagnelie2019-06-211-0/+4
| | | | | | | | | | | | | | | When exporting ZVOLs as SCSI LUNs, by default Windows will not issue them UNMAP commands. This reduces storage efficiency in many cases. We add the SCSI_PASSTHROUGH flag to the zvol's device queue, which lets the SCSI target logic know that it can handle SCSI commands. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: John Gallagher <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Closes #8933
* Prevent pointer to an out-of-scope local variableTomohiro Kusumi2019-06-201-2/+1
| | | | | | | | | | | | `show_str` could be a pointer to a local variable in stack which is out-of-scope by the time `return (snprintf(buf, buflen, "%s\n", show_str));` is called. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #8924 Closes #8940
* dedup=verify doesn't clear the blkptr's dedup flagMatthew Ahrens2019-06-201-0/+2
| | | | | | | | | | | | The logic to handle strong checksum collisions where the data doesn't match is incorrect. It is not clearing the dedup bit of the blkptr, which can cause a panic later in zio_ddt_free() due to the dedup table not matching what is in the blkptr. Reviewed-by: Tom Caputi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-48097 Closes #8936
* Update vdev_ops_t from illumosIgor K2019-06-207-143/+143
| | | | | | | | Align vdev_ops_t from illumos for better compatibility. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Igor Kozhukhov <[email protected]> Closes #8925
* Allow unencrypted children of encrypted datasetsTom Caputi2019-06-203-62/+13
| | | | | | | | | | | | | | | | | | When encryption was first added to ZFS, we made a decision to prevent users from creating unencrypted children of encrypted datasets. The idea was to prevent users from inadvertently leaving some of their data unencrypted. However, since the release of 0.8.0, some legitimate reasons have been brought up for this behavior to be allowed. This patch simply removes this limitation from all code paths that had checks for it and updates the tests accordingly. Reviewed-by: Jason King <[email protected]> Reviewed-by: Sean Eric Fagan <[email protected]> Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8737 Closes #8870
* Remove dedupditto functionalityMatthew Ahrens2019-06-193-147/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If dedup is in use, the `dedupditto` property can be set, causing ZFS to keep an extra copy of data that is referenced many times (>100x). The idea was that this data is more important than other data and thus we want to be really sure that it is not lost if the disk experiences a small amount of random corruption. ZFS (and system administrators) rely on the pool-level redundancy to protect their data (e.g. mirroring or RAIDZ). Since the user/sysadmin doesn't have control over what data will be offered extra redundancy by dedupditto, this extra redundancy is not very useful. The bulk of the data is still vulnerable to loss based on the pool-level redundancy. For example, if particle strikes corrupt 0.1% of blocks, you will either be saved by mirror/raidz, or you will be sad. This is true even if dedupditto saved another 0.01% of blocks from being corrupted. Therefore, the dedupditto functionality is rarely enabled (i.e. the property is rarely set), and it fulfills its promise of increased redundancy even more rarely. Additionally, this feature does not work as advertised (on existing releases), because scrub/resilver did not repair the extra (dedupditto) copy (see https://github.com/zfsonlinux/zfs/pull/8270). In summary, this seldom-used feature doesn't work, and even if it did it wouldn't provide useful data protection. It has a non-trivial maintenance burden (again see https://github.com/zfsonlinux/zfs/pull/8270). We should remove the dedupditto functionality. For backwards compatibility with the existing CLI, "zpool set dedupditto" will still "succeed" (exit code zero), but won't have any effect. For backwards compatibility with existing pools that had dedupditto enabled at some point, the code will still be able to understand dedupditto blocks and free them when appropriate. However, ZFS won't write any new dedupditto blocks. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Igor Kozhukhov <[email protected]> Reviewed-by: Alek Pinchuk <[email protected]> Issue #8270 Closes #8310
* Implement Redacted Send/ReceivePaul Dagnelie2019-06-1925-1727/+6198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Prashanth Sreenivasa <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: Chris Williamson <[email protected]> Reviewed-by: Pavel Zhakarov <[email protected]> Reviewed-by: Sebastien Roy <[email protected]> Reviewed-by: Prakash Surya <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Closes #7958
* Minimize aggsum_compare(&arc_size, arc_c) calls.Alexander Motin2019-06-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | For busy ARC situation when arc_size close to arc_c is desired. But then it is quite likely that aggsum_compare(&arc_size, arc_c) will need to flush per-CPU buckets to find exact comparison result. Doing that often in a hot path penalizes whole idea of aggsum usage there, since it replaces few simple atomic additions with dozens of lock acquisitions. Replacing aggsum_compare() with aggsum_upper_bound() in code increasing arc_p when ARC is growing (arc_size < arc_c) according to PMC profiles allows to save ~5% of CPU time in aggsum code during sequential write to 12 ZVOLs with 16KB block size on large dual-socket system. I suppose there some minor arc_p behavior change due to lower precision of the new code, but I don't think it is a big deal, since it should affect only very small window in time (aggsum buckets are flushed every second) and in ARC size (buckets are limited to 10 average ARC blocks per CPU). Reviewed-by: Chris Dunlop <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Closes #8901
* panic in removal_remap test on 4K devicesMatthew Ahrens2019-06-132-10/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the zfs_remove_max_segment tunable is changed to be not a multiple of the sector size, then the device removal code will malfunction and try to create mappings that are smaller than one sector, leading to a panic. On debug bits this assertion will fail in spa_vdev_copy_segment(): ASSERT3U(DVA_GET_ASIZE(&dst), ==, size); On nondebug, the system panics with a stack like: metaslab_free_concrete() metaslab_free_impl() metaslab_free_impl_cb() vdev_indirect_remap() free_from_removing_vdev() metaslab_free_impl() metaslab_free_dva() metaslab_free() Fortunately, the default for zfs_remove_max_segment is 1MB, so this can't occur by default. We hit it during this test because removal_remap.ksh changes zfs_remove_max_segment to 1KB. When testing on 4KB-sector disks, we hit the bug. This change makes the zfs_remove_max_segment tunable more robust, automatically rounding it up to a multiple of the sector size. We also turn some key assertions into VERIFY's so that similar bugs would be caught before they are encoded on disk (and thus avoid a panic-reboot-loop). Reviewed-by: Sean Eric Fagan <[email protected]> Reviewed-by: Pavel Zakharov <[email protected]> Reviewed-by: Serapheim Dimitropoulos <[email protected]> Reviewed-by: Sebastien Roy <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-61342 Closes #8893
* compress metadata in later sync passesMatthew Ahrens2019-06-131-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting in sync pass 5 (zfs_sync_pass_dont_compress), we disable compression (including of metadata). Ostensibly this helps the sync passes to converge (i.e. for a sync pass to not need to allocate anything because it is 100% overwrites). However, in practice it increases the average number of sync passes, because when we turn compression off, a lot of block's size will change and thus we have to re-allocate (not overwrite) them. It also increases the number of 128KB allocations (e.g. for indirect blocks and spacemaps) because these will not be compressed. The 128K allocations are especially detrimental to performance on highly fragmented systems, which may have very few free segments of this size, and may need to load new metaslabs to satisfy 128K allocations. We should increase zfs_sync_pass_dont_compress. In practice on a highly fragmented system we see a few 5-pass txg's, a tiny number of 6-pass txg's, and no txg's with more than 6 passes. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Reviewed-by: Serapheim Dimitropoulos <[email protected]> Reviewed-by: George Wilson <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-63431 Closes #8892
* Move write aggregation memory copy out of vq_lockAlexander Motin2019-06-131-10/+12
| | | | | | | | | | | | | | | | | | | Memory copy is too heavy operation to do under the congested lock. Moving it out reduces congestion by many times to almost invisible. Since the original zio removed from the queue, and the child zio is not executed yet, I don't see why would the copy need protection. My guess it just remained like this from the time when lock was not dropped here, which was added later to fix lock ordering issue. Multi-threaded sequential write tests with both HDD and SSD pools with ZVOL block sizes of 4KB, 16KB, 64KB and 128KB all show major reduction of lock congestion, saving from 15% to 35% of CPU time and increasing throughput from 10% to 40%. Reviewed-by: Richard Yao <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Closes #8890
* looping in metaslab_block_picker impacts performance on fragmented poolsMatthew Ahrens2019-06-131-60/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On fragmented pools with high-performance storage, the looping in metaslab_block_picker() can become the performance-limiting bottleneck. When looking for a larger block (e.g. a 128K block for the ZIL), we may search through many free segments (up to hundreds of thousands) to find one that is large enough to satisfy the allocation. This can take a long time (up to dozens of ms), and is done while holding the ms_lock, which other threads may spin waiting for. When this performance problem is encountered, profiling will show high CPU time in metaslab_block_picker, as well as in mutex_enter from various callers. The problem is very evident on a test system with a sync write workload with 8K writes to a recordsize=8k filesystem, with 4TB of SSD storage, 84% full and 88% fragmented. It has also been observed on production systems with 90TB of storage, 76% full and 87% fragmented. The fix is to change metaslab_df_alloc() to search only up to 16MB from the previous allocation (of this alignment). After that, we will pick a segment that is of the exact size requested (or larger). This reduces the number of iterations to a few hundred on fragmented pools (a ~100x improvement). Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: Serapheim Dimitropoulos <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-62324 Closes #8877
* ztest: dmu_tx_assign() gets ENOSPC in spa_vdev_remove_thread()Matthew Ahrens2019-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | When running zloop, we occasionally see the following crash: dmu_tx_assign(tx, TXG_WAIT) == 0 (0x1c == 0) ASSERT at ../../module/zfs/vdev_removal.c:1507:spa_vdev_remove_thread()/sbin/ztest(+0x89c3)[0x55faf567b9c3] The error value 0x1c is ENOSPC. The transaction used by spa_vdev_remove_thread() should not be able to fail due to being out of space. i.e. we should not call dmu_tx_hold_space(). This will allow the removal thread to schedule its work even when the pool is low on space. The "slop space" will provide enough free space to sync out the txg. Reviewed-by: Igor Kozhukhov <[email protected]> Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-37853 Closes #8889
* Fix lockdep warning on insmodTomohiro Kusumi2019-06-121-0/+5
| | | | | | | | | | | | | | sysfs_attr_init() is required to make lockdep happy for dynamically allocated sysfs attributes. This fixed #8868 on Fedora 29 running kernel-debug. This requirement was introduced in 2.6.34. See include/linux/sysfs.h for what it actually does. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Olaf Faaland <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #8868 Closes #8884
* fat zap should prefetch when iteratingMatthew Ahrens2019-06-124-7/+110
| | | | | | | | | | | | | | | | | When iterating over a ZAP object, we're almost always certain to iterate over the entire object. If there are multiple leaf blocks, we can realize a performance win by issuing reads for all the leaf blocks in parallel when the iteration begins. For example, if we have 10,000 snapshots, "zfs destroy -nv pool/fs@1%9999" can take 30 minutes when the cache is cold. This change provides a >3x performance improvement, by issuing the reads for all ~64 blocks of each ZAP object in parallel. Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-58347 Closes #8862
* Target ARC size can get reduced to arc_c_minMatthew Ahrens2019-06-121-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Sometimes the target ARC size is reduced to arc_c_min, which impacts performance. We've seen this happen as part of the random_reads performance regression test, where the ARC size is reduced before the reads test starts which impacts how long it takes for system to reach good IOPS performance. We call arc_reduce_target_size when arc_reap_cb_check() returns TRUE, and arc_available_memory() is less than arc_c>>arc_shrink_shift. However, arc_available_memory() could easily be low, even when arc_c is low, because we can have tons of unused bufs in the abd kmem cache. This would be especially true just after the DMU requests a bunch of stuff be evicted from the ARC (e.g. due to "zpool export"). To fix this, the ARC should reduce arc_c by the requested amount, not all the way down to arc_size (or arc_c_min), which can be very small. Reviewed-by: Tim Chase <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-59431 Closes #8864
* Fix typo in vdev_raidz_math.cbnjf2019-06-121-1/+1
| | | | | | | | | Fix typo in vdev_raidz_math.c Reviewed by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Brad Forschinger <[email protected]> Closes #8875 Closes #8880
* single-chunk scatter ABDs can be treated as linearMatthew Ahrens2019-06-113-53/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Scatter ABD's are allocated from a number of pages. In contrast to linear ABD's, these pages are disjoint in the kernel's virtual address space, so they can't be accessed as a contiguous buffer. Therefore routines that need a linear buffer (e.g. abd_borrow_buf() and friends) must allocate a separate linear buffer (with zio_buf_alloc()), and copy the contents of the pages to/from the linear buffer. This can have a measurable performance overhead on some workloads. https://github.com/zfsonlinux/zfs/commit/87c25d567fb7969b44c7d8af63990e ("abd_alloc should use scatter for >1K allocations") increased the use of scatter ABD's, specifically switching 1.5K through 4K (inclusive) buffers from linear to scatter. For workloads that access blocks whose compressed sizes are in this range, that commit introduced an additional copy into the read code path. For example, the sequential_reads_arc_cached tests in the test suite were reduced by around 5% (this is doing reads of 8K-logical blocks, compressed to 3K, which are cached in the ARC). This commit treats single-chunk scattered buffers as linear buffers, because they are contiguous in the kernel's virtual address space. All single-page (4K) ABD's can be represented this way. Some multi-page ABD's can also be represented this way, if we were able to allocate a single "chunk" (higher-order "page" which represents a power-of-2 series of physically-contiguous pages). This is often the case for 2-page (8K) ABD's. Representing a single-entry scatter ABD as a linear ABD has the performance advantage of avoiding the copy (and allocation) in abd_borrow_buf_copy / abd_return_buf_copy. A performance increase of around 5% has been observed for ARC-cached reads (of small blocks which can take advantage of this), fixing the regression introduced by 87c25d567. Note that this optimization is only possible because all physical memory is always mapped into the kernel's address space. This is not the case for HIGHMEM pages, so the optimization can not be made on 32-bit systems. Reviewed-by: Chunwei Chen <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #8580
* make zil max block size tunableMatthew Ahrens2019-06-103-9/+71
| | | | | | | | | | | | | | | | | | | | | | | We've observed that on some highly fragmented pools, most metaslab allocations are small (~2-8KB), but there are some large, 128K allocations. The large allocations are for ZIL blocks. If there is a lot of fragmentation, the large allocations can be hard to satisfy. The most common impact of this is that we need to check (and thus load) lots of metaslabs from the ZIL allocation code path, causing sync writes to wait for metaslabs to load, which can take a second or more. In the worst case, we may not be able to satisfy the allocation, in which case the ZIL will resort to txg_wait_synced() to ensure the change is on disk. To provide a workaround for this, this change adds a tunable that can reduce the size of ZIL blocks. External-issue: DLPX-61719 Reviewed-by: George Wilson <[email protected]> Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #8865
* Fix comparison signedness in arc_is_overflowing()Alexander Motin2019-06-101-2/+2
| | | | | | | | | | | | When ARC size is very small, aggsum_lower_bound(&arc_size) may return negative values, that due to unsigned comparison caused delays, waiting for arc_adjust() to "fix" it by calling aggsum_value(&arc_size). Use of signed comparison there fixes the problem. Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Closes #8873
* Fix incorrect error message for raw receiveTom Caputi2019-06-101-2/+9
| | | | | | | | | | | | | | | | | | This patch fixes an incorrect error message that comes up when doing a non-forcing, raw, incremental receive into a dataset that has a newer snapshot than the "from" snapshot. In this case, the current code prints a confusing message about an IVset guid mismatch. This functionality is supported by non-raw receives as an undocumented feature, but was never supported by the raw receive code. If this is desired in the future, we can probably figure out a way to make it work. Reviewed by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Issue #8758 Closes #8863
* Allow metaslab to be unloaded even when not freed fromPaul Dagnelie2019-06-062-22/+39
| | | | | | | | | | | | | | | | | | | | | | On large systems, the memory used by loaded metaslabs can become a concern. While range trees are a fairly efficient data structure, on heavily fragmented pools they can still consume a significant amount of memory. This problem is amplified when we fail to unload metaslabs that we aren't using. Currently, we only unload a metaslab during metaslab_sync_done; in order for that function to be called on a given metaslab in a given txg, we have to have dirtied that metaslab in that txg. If the dirtying was the result of an allocation, we wouldn't be unloading it (since it wouldn't be 8 txgs since it was selected), so in effect we only unload a metaslab during txgs where it's being freed from. We move the unload logic from sync_done to a new function, and call that function on all metaslabs in a given vdev during vdev_sync_done(). Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Closes #8837
* Reinstate raw receive check when truncatingTom Caputi2019-06-061-1/+15
| | | | | | | | | | | | | | This patch re-adds a check that was removed in 369aa50. The check confirms that a raw receive is not occuring before truncating an object's dn_maxblkid. At the time, it was believed that all cases that would hit this code path would be handled in other places, but that was not the case. Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8852 Closes #8857
* l2arc_apply_transforms: Fix typo in commentAllan Jude2019-06-061-1/+1
| | | | | | | | | Reviewed-by: Chris Dunlop <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Richard Laager <[email protected]> Signed-off-by: Allan Jude <[email protected]> Closes #8822
* Reduced IOPS when all vdevs are in the zfs_mg_fragmentation_thresholdSerapheim Dimitropoulos2019-06-061-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | Historically while doing performance testing we've noticed that IOPS can be significantly reduced when all vdevs in the pool are hitting the zfs_mg_fragmentation_threshold percentage. Specifically in a hypothetical pool with two vdevs, what can happen is the following: Vdev A would go above that threshold and only vdev B would be used. Then vdev B would pass that threshold but vdev A would go below it (we've been freeing from A to allocate to B). The allocations would go back and forth utilizing one vdev at a time with IOPS taking a hit. Empirically, we've seen that our vdev selection for allocations is good enough that fragmentation increases uniformly across all vdevs the majority of the time. Thus we set the threshold percentage high enough to avoid hitting the speed bump on pools that are being pushed to the edge. We effectively disable its effect in the majority of the cases but we don't remove (at least for now) just in case we hit any weird behavior in the future. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Signed-off-by: Serapheim Dimitropoulos <[email protected]> Closes #8859
* Fix integer overflow of ZTOI(zp)->i_generationTom Caputi2019-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | The ZFS on-disk format stores each inode's generation ID as a 64 bit number on disk and in-core. However, the Linux kernel's inode is only a 32 bit number. In most places, the code handles this correctly, but the cast is missing in zfs_rezget(). For many pools, this isn't an issue since the generation ID is computed as the current txg when the inode is created and many pools don't have more than 2^32 txgs. For the pools that have more txgs, this issue causes any inode with a high enough generation number to report IO errors after a call to "zfs rollback" while holding the file or directory open. This patch simply adds the missing cast. Reviewed-by: Alek Pinchuk <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8858
* Drop objid argument in zfs_znode_alloc() (sync with OpenZFS)Tomohiro Kusumi2019-06-051-5/+4
| | | | | | | | | | | | | Since zfs_znode_alloc() already takes dmu_buf_t*, taking another uint64_t argument for objid is redundant. inode's ->i_ino does and needs to match znode's ->z_id. zfs_znode_alloc() in FreeBSD and illumos doesn't have this argument since vnode doesn't have vnode# in VFS (hence ->z_id exists). Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #8841
* Wait in 'S' state when send/recv pipe is blockingDeHackEd2019-06-031-2/+2
| | | | | | | | Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: DHE <[email protected]> Closes #8733 Closes #8752
* Make zfs_async_block_max_blocks handle zero correctlyTulsiJain2019-06-031-1/+3
| | | | | | | | | Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: TulsiJain <[email protected]> Closes #8829 Closes #8289
* Revert "Report holes when there are only metadata changes"Brian Behlendorf2019-05-301-28/+3
| | | | | | | | | | | | This reverts commit ec4f9b8f30 which introduced a narrow race which can lead to lseek(, SEEK_DATA) incorrectly returning ENXIO. Resolve the issue by revering this change to restore the previous behavior which depends solely on checking the dirty list. Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Igor Kozhukhov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #8816 Closes #8834
* Remove vn_set_fs_pwd()/vn_set_pwd() (no need to be at / during insmod)Tomohiro Kusumi2019-05-292-9/+1
| | | | | | | | | | | | | | | | | | Per suggestion from @behlendorf in #8777, remove vn_set_fs_pwd() and vn_set_pwd() which are only used in zfs_ioctl.c:_init() while loading zfs.ko. The rest of initialization functions being called here after cwd set to / don't depend on cwd of the process except for spa_config_load(). spa_config_load() uses a relative path ".//etc/zfs/zpool.cache" when `rootdir` is non-NULL, which is "/etc/zfs/zpool.cache" given cwd is /, so just unconditionally use the absolute path without "./", so that `vn_set_pwd("/")` as well as the entire functions can be removed. This is also what FreeBSD does. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #8826
* Exclude log device ashift from normal classBrian Behlendorf2019-05-291-4/+1
| | | | | | | | | | | | | | | | When opening a log device during import its allocation bias will not yet have been set by vdev_load(). This results in the log device's ashift being incorrectly applied to the maximum ashift of the vdevs in the normal class. Which in turn prevents the removal of any top-level devices due to the ashift check in the spa_vdev_remove_top_check() function. This issue is resolved by including vdev_islog in the check since it will be set correctly during vdev_open(). Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Igor Kozhukhov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #8735
* Fix integer overflow in get_next_chunk()madz2019-05-291-2/+2
| | | | | | | | | | dn->dn_datablksz type is uint32_t and need to be casted to uint64_t to avoid an overflow when the record size is greater than 4 MiB. Reviewed-by: Tom Caputi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olivier Mazouffre <[email protected]> Closes #8778 Closes #8797
* Double-free of encryption wrapping key due to invalid pool propertiesloli10K2019-05-281-12/+9
| | | | | | | | | | This commits fixes a double-free in zfs_ioc_pool_create() triggered by specifying an unsupported combination of properties when creating a pool with encryption enabled. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tom Caputi <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #8791
* Update descriptions for vnopsTomohiro Kusumi2019-05-252-13/+14
| | | | | | | | These descriptions are not uptodate with the code. Reviewed-by: Igor Kozhukhov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #8767
* Fix embedded bp accounting in count_block()Tom Caputi2019-05-251-0/+7
| | | | | | | | | | | | | | | Currently, count_block() does not correctly account for the possibility that the bp that is passed to it could be embedded. These blocks shouldn't be counted since the work of scanning these blocks in already handled when the containing block is scanned. This patch simply resolves this issue by returning early in this case. Reviewed by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Authored-by: Bill Sommerfeld <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8800 Closes #8766
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 10:26:27 +0000