| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
By marking DMU transaction processing contexts with PF_FSTRANS
we can revert the KM_PUSHPAGE -> KM_SLEEP changes. This brings
us back in line with upstream. In some cases this means simply
swapping the flags back. For others fnvlist_alloc() was replaced
by nvlist_alloc(..., KM_PUSHPAGE) and must be reverted back to
fnvlist_alloc() which assumes KM_SLEEP.
The one place KM_PUSHPAGE is kept is when allocating ARC buffers
which allows us to dip in to reserved memory. This is again the
same as upstream.
Signed-off-by: Brian Behlendorf <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Callers of kmem_alloc() which passed the KM_NODEBUG flag to suppress
the large allocation warning have been replaced by vmem_alloc() as
appropriate. The updated vmem_alloc() call will not print a warning
regardless of the size of the allocation.
A careful reader will notice that not all callers have been changed
to vmem_alloc(). Some have only had the KM_NODEBUG flag removed.
This was possible because the default warning threshold has been
increased to 32k. This is desirable because it minimizes the need
for Linux specific code changes.
Signed-off-by: Brian Behlendorf <[email protected]>
|
| |
|
|
|
|
|
|
|
| |
This gives a huge performance improvement in operations with deduped
datasets especially when the bottleneck is the amount of ram
available for zfs.
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #2639
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
4374 dn_free_ranges should use range_tree_t
Reviewed by: George Wilson <[email protected]>
Reviewed by: Max Grossman <[email protected]>
Reviewed by: Christopher Siden <[email protected]
Reviewed by: Garrett D'Amore <[email protected]>
Reviewed by: Dan McDonald <[email protected]>
Approved by: Dan McDonald <[email protected]>
References:
https://www.illumos.org/issues/4374
https://github.com/illumos/illumos-gate/commit/bf16b11
Ported by: Tim Chase <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #2531
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
4370 avoid transmitting holes during zfs send
4371 DMU code clean up
Reviewed by: Matthew Ahrens <[email protected]>
Reviewed by: George Wilson <[email protected]>
Reviewed by: Christopher Siden <[email protected]>
Reviewed by: Josef 'Jeff' Sipek <[email protected]>
Approved by: Garrett D'Amore <[email protected]>a
References:
https://www.illumos.org/issues/4370
https://www.illumos.org/issues/4371
https://github.com/illumos/illumos-gate/commit/43466aa
Ported by: Tim Chase <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #2529
|
| |
|
|
|
|
|
|
|
|
|
| |
Back the allocations for ddt tables+entries and l2arc headers with
kmem caches. This will reduce the cost of allocating these commonly
used structures and allow for greater visibility of them through the
/proc/spl/kmem/slab interface.
Signed-off-by: John Layman <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #1893
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written. Others were
caused when the common code was slightly adjusted for Linux.
This patch contains no functional changes. It only refreshes
the code to conform to style guide.
Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request. The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #1821
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
3598 want to dtrace when errors are generated in zfs
Reviewed by: Dan Kimmel <[email protected]>
Reviewed by: Adam Leventhal <[email protected]>
Reviewed by: Christopher Siden <[email protected]>
Approved by: Garrett D'Amore <[email protected]>
References:
https://www.illumos.org/issues/3598
illumos/illumos-gate@be6fd75a69ae679453d9cda5bff3326111e6d1ca
Ported-by: Richard Yao <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Issue #1775
Porting notes:
1. include/sys/zfs_context.h has been modified to render some new
macros inert until dtrace is available on Linux.
2. Linux-specific changes have been adapted to use SET_ERROR().
3. I'm NOT happy about this change. It does nothing but ugly
up the code under Linux. Unfortunately we need to take it to
avoid more merge conflicts in the future. -Brian
|
| |
|
|
|
|
|
|
|
|
|
| |
The assertions in ddt_phys_decref and ddt_sync_entry cast ddp->ddp_refcnt
from uint64_t to int64_t, with a reference count bigger than 2^63, e.g. the
reference count of zero blocks commonly available in spare files, we may
mistakenly hit these assertations, so drop the type conversions here.
Signed-off-by: Ying Zhu <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #1436
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The assumption in zio_ddt_free() is that ddt_phys_select() must
always find a match. However, if that fails due to a damaged
DDT or some other reason the code will NULL dereference in
ddt_phys_decref().
While this should never happen it has been observed on various
platforms. The result is that unless your willing to patch the
ZFS code the pool is inaccessible. Therefore, we're choosing
to more gracefully handle this case rather than leave it fatal.
http://mail.opensolaris.org/pipermail/zfs-discuss/2012-February/050972.html
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #1308
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <[email protected]>
Reviewed by: George Wilson <[email protected]>
Reviewed by: Richard Lowe <[email protected]>
Reviewed by: Dan Kruchinin <[email protected]>
Approved by: Eric Schrock <[email protected]>
References:
illumos/illumos-gate@53089ab7c84db6fb76c16ca50076c147cda11757
illumos/illumos-gate@ad135b5d644628e791c3188a6ecbd9c257961ef8
illumos changeset: 13700:2889e2596bd6
https://www.illumos.org/issues/2619
https://www.illumos.org/issues/2747
NOTE: The grub specific changes were not ported. This change
must be made to the Linux grub packages.
Ported-by: Brian Behlendorf <[email protected]>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The interface for the ddt_zap_count() function assumes it can
never fail. However, internally ddt_zap_count() is implemented
with zap_count() which can potentially fail. Now because there
was no way to return the error to the caller a VERIFY was used
to ensure this case never happens.
Unfortunately, it has been observed that pools can be damaged in
such a way that zap_count() fails. The result is that the pool can
not be imported without hitting the VERIFY and crashing the system.
This patch reworks ddt_object_count() so the error can be safely
caught and returned to the caller. This allows a pool which has
be damaged in this way to be safely rewound for import.
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #910
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This warning indicates the incorrect use of KM_SLEEP in a call
path which must use KM_PUSHPAGE to avoid deadlocking in direct
reclaim. See commit b8d06fca089fae4680c3a552fc55c512bfb02202
for additional details.
SPL: Fixing allocation for task txg_sync (6093) which
used GFP flags 0x297bda7c with PF_NOFS set
Signed-off-by: Brian Behlendorf <[email protected]>
Issue #973
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Differences between how paging is done on Solaris and Linux can cause
deadlocks if KM_SLEEP is used in any the following contexts.
* The txg_sync thread
* The zvol write/discard threads
* The zpl_putpage() VFS callback
This is because KM_SLEEP will allow for direct reclaim which may result
in the VM calling back in to the filesystem or block layer to write out
pages. If a lock is held over this operation the potential exists to
deadlock the system. To ensure forward progress all memory allocations
in these contexts must us KM_PUSHPAGE which disables performing any I/O
to accomplish the memory allocation.
Previously, this behavior was acheived by setting PF_MEMALLOC on the
thread. However, that resulted in unexpected side effects such as the
exhaustion of pages in ZONE_DMA. This approach touchs more of the zfs
code, but it is more consistent with the right way to handle these cases
under Linux.
This is patch lays the ground work for being able to safely revert the
following commits which used PF_MEMALLOC:
21ade34 Disable direct reclaim for z_wr_* threads
cfc9a5c Fix zpl_writepage() deadlock
eec8164 Fix ASSERTION(!dsl_pool_sync_context(tx->tx_pool))
Signed-off-by: Richard Yao <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Issue #726
|
| |
|
|
|
|
|
|
|
| |
Add the missing error handling to ddt_object_load(). There's no
good reason this needs to be fatal. It is preferable that an
error be returned. This will allow 'zpool import -FX' to safely
attempt to rollback through previous txgs looking for a good one.
Signed-off-by: Brian Behlendorf <[email protected]>
|
| |
|
|
|
|
|
| |
Stack usage for ddt_class_contains() reduced from 524 bytes to 68
bytes. This large stack allocation significantly contributed to
the likelyhood of a stack overflow when scrubbing/resilvering
dedup pools.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds module options for all existing zfs tunables.
Ideally the average user should never need to modify any of these
values. However, in practice sometimes you do need to tweak these
values for one reason or another. In those cases it's nice not to
have to resort to rebuilding from source. All tunables are visable
to modinfo and the list is as follows:
$ modinfo module/zfs/zfs.ko
filename: module/zfs/zfs.ko
license: CDDL
author: Sun Microsystems/Oracle, Lawrence Livermore National Laboratory
description: ZFS
srcversion: 8EAB1D71DACE05B5AA61567
depends: spl,znvpair,zcommon,zunicode,zavl
vermagic: 2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions
parm: zvol_major:Major number for zvol device (uint)
parm: zvol_threads:Number of threads for zvol device (uint)
parm: zio_injection_enabled:Enable fault injection (int)
parm: zio_bulk_flags:Additional flags to pass to bulk buffers (int)
parm: zio_delay_max:Max zio millisec delay before posting event (int)
parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool)
parm: zil_replay_disable:Disable intent logging replay (int)
parm: zfs_nocacheflush:Disable cache flushes (bool)
parm: zfs_read_chunk_size:Bytes to read per chunk (long)
parm: zfs_vdev_max_pending:Max pending per-vdev I/Os (int)
parm: zfs_vdev_min_pending:Min pending per-vdev I/Os (int)
parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int)
parm: zfs_vdev_time_shift:Deadline time shift for vdev I/O (int)
parm: zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int)
parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int)
parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int)
parm: zfs_vdev_scheduler:I/O scheduler (charp)
parm: zfs_vdev_cache_max:Inflate reads small than max (int)
parm: zfs_vdev_cache_size:Total size of the per-disk cache (int)
parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int)
parm: zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int)
parm: zfs_recover:Set to attempt to recover from fatal errors (int)
parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp)
parm: zfs_zevent_len_max:Max event queue length (int)
parm: zfs_zevent_cols:Max event column width (int)
parm: zfs_zevent_console:Log events to the console (int)
parm: zfs_top_maxinflight:Max I/Os per top-level (int)
parm: zfs_resilver_delay:Number of ticks to delay resilver (int)
parm: zfs_scrub_delay:Number of ticks to delay scrub (int)
parm: zfs_scan_idle:Idle window in clock ticks (int)
parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int)
parm: zfs_free_min_time_ms:Min millisecs to free per txg (int)
parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int)
parm: zfs_no_scrub_io:Set to disable scrub I/O (bool)
parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool)
parm: zfs_txg_timeout:Max seconds worth of delta per txg (int)
parm: zfs_no_write_throttle:Disable write throttling (int)
parm: zfs_write_limit_shift:log2(fraction of memory) per txg (int)
parm: zfs_txg_synctime_ms:Target milliseconds between tgx sync (int)
parm: zfs_write_limit_min:Min tgx write limit (ulong)
parm: zfs_write_limit_max:Max tgx write limit (ulong)
parm: zfs_write_limit_inflated:Inflated tgx write limit (ulong)
parm: zfs_write_limit_override:Override tgx write limit (ulong)
parm: zfs_prefetch_disable:Disable all ZFS prefetching (int)
parm: zfetch_max_streams:Max number of streams per zfetch (uint)
parm: zfetch_min_sec_reap:Min time before stream reclaim (uint)
parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint)
parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong)
parm: zfs_pd_blks_max:Max number of blocks to prefetch (int)
parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int)
parm: zfs_arc_min:Min arc size (ulong)
parm: zfs_arc_max:Max arc size (ulong)
parm: zfs_arc_meta_limit:Meta limit for arc size (ulong)
parm: zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int)
parm: zfs_arc_grow_retry:Seconds before growing arc size (int)
parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int)
parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
|
| |
|
|
|
|
| |
Required kmem/vmem changes
Signed-off-by: Brian Behlendorf <[email protected]>
|
| |
|
|
|
|
|
|
| |
Fix non-c90 compliant code, for the most part these changes
simply deal with where a particular variable is declared.
Under c90 it must alway be done at the very start of a block.
Signed-off-by: Brian Behlendorf <[email protected]>
|
| |
|
|
|
| |
This is the last official OpenSolaris tag before the public
development tree was closed.
|
| |
|
