aboutsummaryrefslogtreecommitdiffstats
path: root/module/zcommon/zfeature_common.c
Commit message (Collapse)AuthorAgeFilesLines
* Implementation of block cloning for ZFSPawel Jakub Dawidek2023-03-101-0/+6
| | | | | | | | | | | | | | | Block Cloning allows to manually clone a file (or a subset of its blocks) into another (or the same) file by just creating additional references to the data blocks without copying the data itself. Those references are kept in the Block Reference Tables (BRTs). The whole design of block cloning is documented in module/zfs/brt.c. Reviewed-by: Alexander Motin <[email protected]> Reviewed-by: Christian Schwarz <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Rich Ercolani <[email protected]> Signed-off-by: Pawel Jakub Dawidek <[email protected]> Closes #13392
* Replace dead opensolaris.org license linkTino Reichardt2022-07-111-1/+1
| | | | | | | | | The commit replaces all findings of the link: http://www.opensolaris.org/os/licensing with this one: https://opensource.org/licenses/CDDL-1.0 Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tino Reichardt <[email protected]> Closes #13619
* Introduce BLAKE3 checksums as an OpenZFS featureTino Reichardt2022-06-081-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds BLAKE3 checksums to OpenZFS, it has similar performance to Edon-R, but without the caveats around the latter. Homepage of BLAKE3: https://github.com/BLAKE3-team/BLAKE3 Wikipedia: https://en.wikipedia.org/wiki/BLAKE_(hash_function)#BLAKE3 Short description of Wikipedia: BLAKE3 is a cryptographic hash function based on Bao and BLAKE2, created by Jack O'Connor, Jean-Philippe Aumasson, Samuel Neves, and Zooko Wilcox-O'Hearn. It was announced on January 9, 2020, at Real World Crypto. BLAKE3 is a single algorithm with many desirable features (parallelism, XOF, KDF, PRF and MAC), in contrast to BLAKE and BLAKE2, which are algorithm families with multiple variants. BLAKE3 has a binary tree structure, so it supports a practically unlimited degree of parallelism (both SIMD and multithreading) given enough input. The official Rust and C implementations are dual-licensed as public domain (CC0) and the Apache License. Along with adding the BLAKE3 hash into the OpenZFS infrastructure a new benchmarking file called chksum_bench was introduced. When read it reports the speed of the available checksum functions. On Linux: cat /proc/spl/kstat/zfs/chksum_bench On FreeBSD: sysctl kstat.zfs.misc.chksum_bench This is an example output of an i3-1005G1 test system with Debian 11: implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 1196 1602 1761 1749 1762 1759 1751 skein-generic 546 591 608 615 619 612 616 sha256-generic 240 300 316 314 304 285 276 sha512-generic 353 441 467 476 472 467 426 blake3-generic 308 313 313 313 312 313 312 blake3-sse2 402 1289 1423 1446 1432 1458 1413 blake3-sse41 427 1470 1625 1704 1679 1607 1629 blake3-avx2 428 1920 3095 3343 3356 3318 3204 blake3-avx512 473 2687 4905 5836 5844 5643 5374 Output on Debian 5.10.0-10-amd64 system: (Ryzen 7 5800X) implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 1840 2458 2665 2719 2711 2723 2693 skein-generic 870 966 996 992 1003 1005 1009 sha256-generic 415 442 453 455 457 457 457 sha512-generic 608 690 711 718 719 720 721 blake3-generic 301 313 311 309 309 310 310 blake3-sse2 343 1865 2124 2188 2180 2181 2186 blake3-sse41 364 2091 2396 2509 2463 2482 2488 blake3-avx2 365 2590 4399 4971 4915 4802 4764 Output on Debian 5.10.0-9-powerpc64le system: (POWER 9) implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 1213 1703 1889 1918 1957 1902 1907 skein-generic 434 492 520 522 511 525 525 sha256-generic 167 183 187 188 188 187 188 sha512-generic 186 216 222 221 225 224 224 blake3-generic 153 152 154 153 151 153 153 blake3-sse2 391 1170 1366 1406 1428 1426 1414 blake3-sse41 352 1049 1212 1174 1262 1258 1259 Output on Debian 5.10.0-11-arm64 system: (Pi400) implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 487 603 629 639 643 641 641 skein-generic 271 299 303 308 309 309 307 sha256-generic 117 127 128 130 130 129 130 sha512-generic 145 165 170 172 173 174 175 blake3-generic 81 29 71 89 89 89 89 blake3-sse2 112 323 368 379 380 371 374 blake3-sse41 101 315 357 368 369 364 360 Structurally, the new code is mainly split into these parts: - 1x cross platform generic c variant: blake3_generic.c - 4x assembly for X86-64 (SSE2, SSE4.1, AVX2, AVX512) - 2x assembly for ARMv8 (NEON converted from SSE2) - 2x assembly for PPC64-LE (POWER8 converted from SSE2) - one file for switching between the implementations Note the PPC64 assembly requires the VSX instruction set and the kfpu_begin() / kfpu_end() calls on PowerPC were updated accordingly. Reviewed-by: Felix Dörre <[email protected]> Reviewed-by: Ahelenia Ziemiańska <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tino Reichardt <[email protected]> Co-authored-by: Rich Ercolani <[email protected]> Closes #10058 Closes #12918
* Improve zpool status output, list all affected datasetsGeorge Amanakis2022-04-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Mark Maybee <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Co-authored-by: TulsiJain <[email protected]> Signed-off-by: George Amanakis <[email protected]> Closes #9175 Closes #12812
* log xattr=sa create/remove/update to ZILJitendra Patidar2022-02-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As such, there are no specific synchronous semantics defined for the xattrs. But for xattr=on, it does log to ZIL and zil_commit() is done, if sync=always is set on dataset. This provides sync semantics for xattr=on with sync=always set on dataset. For the xattr=sa implementation, it doesn't log to ZIL, so, even with sync=always, xattrs are not guaranteed to be synced before xattr call returns to caller. So, xattr can be lost if system crash happens, before txg carrying xattr transaction is synced. This change adds xattr=sa logging to ZIL on xattr create/remove/update and xattrs are synced to ZIL (zil_commit() done) for sync=always. This makes xattr=sa behavior similar to xattr=on. Implementation notes: The actual logging is fairly straight-forward and does not warrant additional explanation. However, it has been 14 years since we last added new TX types to the ZIL [1], hence this is the first time we do it after the introduction of zpool features. Therefore, here is an overview of the feature activation and deactivation workflow: 1. The feature must be enabled. Otherwise, we don't log the new record type. This ensures compatibility with older software. 2. The feature is activated per-dataset, since the ZIL is per-dataset. 3. If the feature is enabled and dataset is not for zvol, any append to the ZIL chain will activate the feature for the dataset. Likewise for starting a new ZIL chain. 4. A dataset that doesn't have a ZIL chain has the feature deactivated. We ensure (3) by activating on the first zil_commit() after the feature was enabled. Since activating the features requires waiting for txg sync, the first zil_commit() after enabling the feature will be slower than usual. The downside is that this is really a conservative approximation: even if we never append a 'TX_SETSAXATTR' to the ZIL chain, we pay the penalty for feature activation. The upside is that the user is in control of when we pay the penalty, i.e., upon enabling the feature. We ensure (4) by hooking into zil_sync(), where ZIL destroy actually happens. One more piece on feature activation, since it's spread across multiple functions: zil_commit() zil_process_commit_list() if lwb == NULL // first zil_commit since zil_open zil_create() if no log block pointer in ZIL header: if feature enabled and not active: // CASE 1 enable, COALESCE txg wait with dmu_tx that allocated the log block else // log block was allocated earlier than this zil_open if feature enabled and not active: // CASE 2 enable, EXPLICIT txg wait else // already have an in-DRAM LWB if feature enabled and not active: // this happens when we enable the feature after zil_create // CASE 3 enable, EXPLICIT txg wait [1] https://github.com/illumos/illumos-gate/commit/da6c28aaf62fa55f0fdb8004aa40f88f23bf53f0 Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Christian Schwarz <[email protected]> Reviewed-by: Ahelenia Ziemiańska <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Jitendra Patidar <[email protected]> Closes #8768 Closes #9078
* module/*.ko: prune .data, global .rodataнаб2022-01-141-1/+1
| | | | | | | | | | | | Evaluated every variable that lives in .data (and globals in .rodata) in the kernel modules, and constified/eliminated/localised them appropriately. This means that all read-only data is now actually read-only data, and, if possible, at file scope. A lot of previously- global-symbols became inlinable (and inlined!) constants. Probably not in a big Wowee Performance Moment, but hey. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12899
* zcommon: pre-iterate over sysfs instead of statting every featureнаб2021-12-161-218/+319
| | | | | | | | | | | | | | | | | | | | | If sufficient memory (<2K, realistically) is available, libzfs_init() can be significantly shorted by iterating over the correct sysfs directory before registrations, we can turn 168 stats into 15/18 syscalls (3 opens (6 if built in), 3 fstats, 6 getdentses, and 3 closes), a tenfoldish reduction; this is probably a bit faster, too. The list is always optional, and registration functions (and one-off users) can simply pass NULL, which will fall back to the previous mechanism Also, don't allocate in zfs_mod_supported_impl, and use use access() instead of stat(), since existence is really what we care about Also, fix pre-prop-checking compat in fallback for built-in ZFS Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12089
* FreeBSD supports edonr follow upнаб2021-12-081-1/+2
| | | | | | | | | | | | This chases 269b5dadcfd1d5732cf763dddcd46009a332eae4 (#12735), which touched the actual code but didn't fix the comment Additionally, ignore the name. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Rich Ercolani <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12823
* Enable edonr in FreeBSDRich Ercolani2021-11-161-6/+2
| | | | | | | | | | | The code is integrated, builds fine, runs fine, there's not really any reason not to. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Signed-off-by: Rich Ercolani <[email protected]> Closes #12735
* Add missing checks for unsupported featuresMartin Matuška2021-02-271-0/+2
| | | | | | | | | | | | | After 35ec517 it has become possible to import ZFS pools witn an active org.illumos:edonr feature on FreeBSD, leading to a panic. In addition, "zpool status" reported all pools without edonr as upgradable and "zpool upgrade -v" reported edonr in the list of upgradable features. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Martin Matuska <[email protected]> Closes #11653
* FreeBSD: disable edonr in zfs_mod_supported_feature()Brian Behlendorf2021-02-171-5/+8
| | | | | | | | | | | Rather than conditionally compiling out the edonr code for FreeBSD update zfs_mod_supported_feature() to indicate this feature is unsupported. This ensures that all spa features are defined on every platform, even if they are not supported. Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #11605 Issue #11468
* Update dRAID short feature descriptionBrian Behlendorf2020-11-231-1/+1
| | | | | | | | | The documentation describes dRAID as a distributed spare, not parity, RAID implementation. Update the short feature description to match the rest of the documentation. Reviewed-by: George Melikov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #11229
* Distributed Spare (dRAID) FeatureBrian Behlendorf2020-11-131-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <[email protected]> Co-authored-by: Mark Maybee <[email protected]> Co-authored-by: Don Brady <[email protected]> Co-authored-by: Matthew Ahrens <[email protected]> Co-authored-by: Brian Behlendorf <[email protected]> Reviewed-by: Mark Maybee <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10102
* Add zstd support to zfsMichael Niewöhner2020-08-201-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <[email protected]> Co-authored-by: Brian Behlendorf <[email protected]> Co-authored-by: Sebastian Gottschall <[email protected]> Co-authored-by: Kjeld Schouten-Lebbing <[email protected]> Co-authored-by: Michael Niewöhner <[email protected]> Signed-off-by: Allan Jude <[email protected]> Signed-off-by: Allan Jude <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Sebastian Gottschall <[email protected]> Signed-off-by: Kjeld Schouten-Lebbing <[email protected]> Signed-off-by: Michael Niewöhner <[email protected]> Closes #6247 Closes #9024 Closes #10277 Closes #10278
* Refactor ccompile.h to not include system headersMatthew Macy2020-07-251-0/+1
| | | | | | | | This is a step toward being able to vendor the OpenZFS code in FreeBSD. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Matt Macy <[email protected]> Closes #10625
* Add device rebuild featureBrian Behlendorf2020-07-031-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: John Poduska <[email protected]> Co-authored-by: Mark Maybee <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10349
* Prefer org.openzfs for features and propertiesRichard Laager2020-02-181-2/+13
| | | | | | | | | | Moving forward, we wish to use org.openzfs (no dash) rather than org.open-zfs or org.zfsonlinux for feature GUIDs and property names. The existing feature GUIDs cannot be changed. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Richard Laager <[email protected]> Closes #10003
* Disable sysfs feature checks on FreeBSDMatthew Macy2019-12-061-1/+4
| | | | | | | | | | | The sysfs infrastructure for reporting supported features and properties is Linux specific. Disable it on FreeBSD until it can be extended to be more portable. Reviewed-by: Kjeld Schouten <[email protected]> Reviewed-by: Jorgen Lundman <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matt Macy <[email protected]> Closes #9684
* Disable EDONR on FreeBSDMatthew Macy2019-12-051-0/+3
| | | | | | | | | | | FreeBSD uses its own crypto framework in-kernel which, at this time, has no EDONR implementation. Reviewed-by: Jorgen Lundman <[email protected]> Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matt Macy <[email protected]> Signed-off-by: Ryan Moeller <[email protected]> Closes #9664
* Fix typos in module/Andrea Gelmini2019-08-301-1/+1
| | | | | | | Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Andrea Gelmini <[email protected]> Closes #9241
* Fast Clone DeletionSara Hartse2019-07-261-0/+12
| | | | | | | | | | | | | | | | | | | | | Deleting a clone requires finding blocks are clone-only, not shared with the snapshot. This was done by traversing the entire block tree which results in a large performance penalty for sparsely written clones. This is new method keeps track of clone blocks when they are modified in a "Livelist" so that, when it’s time to delete, the clone-specific blocks are already at hand. We see performance improvements because now deletion work is proportional to the number of clone-modified blocks, not the size of the original dataset. Reviewed-by: Sean Eric Fagan <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Serapheim Dimitropoulos <[email protected]> Signed-off-by: Sara Hartse <[email protected]> Closes #8416
* Log Spacemap ProjectSerapheim Dimitropoulos2019-07-161-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Serapheim Dimitropoulos <[email protected]> Closes #8442
* Implement Redacted Send/ReceivePaul Dagnelie2019-06-191-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Prashanth Sreenivasa <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: Chris Williamson <[email protected]> Reviewed-by: Pavel Zhakarov <[email protected]> Reviewed-by: Sebastien Roy <[email protected]> Reviewed-by: Prakash Surya <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Closes #7958
* Detect and prevent mixed raw and non-raw sendsTom Caputi2019-03-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there is an issue in the raw receive code where raw receives are allowed to happen on top of previously non-raw received datasets. This is a problem because the source-side dataset doesn't know about how the blocks on the destination were encrypted. As a result, any MAC in the objset's checksum-of-MACs tree that is a parent of both blocks encrypted on the source and blocks encrypted by the destination will be incorrect. This will result in authentication errors when we decrypt the dataset. This patch fixes this issue by adding a new check to the raw receive code. The code now maintains an "IVset guid", which acts as an identifier for the set of IVs used to encrypt a given snapshot. When a snapshot is raw received, the destination snapshot will take this value from the DRR_BEGIN payload. Non-raw receives and normal "zfs snap" operations will cause ZFS to generate a new IVset guid. When a raw incremental stream is received, ZFS will check that the "from" IVset guid in the stream matches that of the "from" destination snapshot. If they do not match, the code will error out the receive, preventing the problem. This patch requires an on-disk format change to add the IVset guids to snapshots and bookmarks. As a result, this patch has errata handling and a tunable to help affected users resolve the issue with as little interruption as possible. Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8308
* Add bookmark v2 on-disk featureTom Caputi2019-03-131-0/+11
| | | | | | | | | | | | | | This patch adds the bookmark v2 feature to the on-disk format. This feature will be needed for the upcoming redacted sends and for an upcoming fix that for raw receives. The feature is not currently used by any code and thus this change is a no-op, aside from the fact that the user can now enable the feature. Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Issue #8308
* Add zfs module feature and property compatibilityBrian Behlendorf2019-01-031-6/+30
| | | | | | | | | This change is required to ease the transition when upgrading from 0.7.x to 0.8.x. It allows 0.8.x user space utilities to remain compatible with 0.7.x and older kernel modules. Reviewed-by: Don Brady <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #8231
* Defer new resilvers until the current one endsTom Caputi2018-10-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, if a resilver is triggered for any reason while an existing one is running, zfs will immediately restart the existing resilver from the beginning to include the new drive. This causes problems for system administrators when a drive fails while another is already resilvering. In this case, the optimal thing to do to reduce risk of data loss is to wait for the current resilver to end before immediately replacing the second failed drive, which allows the system to operate with two incomplete drives for the minimum amount of time. This patch introduces the resilver_defer feature that essentially does this for the admin without forcing them to wait and monitor the resilver manually. The change requires an on-disk feature since we must mark drives that are part of a deferred resilver in the vdev config to ensure that we do not assume they are done resilvering when an existing resilver completes. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: @mmaybee Signed-off-by: Tom Caputi <[email protected]> Closes #7732
* Add types to featureflags in zfsPaul Dagnelie2018-10-161-25/+40
| | | | | | | | | | | | | | | | | | | | The boolean featureflags in use thus far in ZFS are extremely useful, but because they take advantage of the zap layer, more interesting data than just a true/false value can be stored in a featureflag. In redacted send/receive, this is used to store the list of redaction snapshots for a redacted dataset. This change adds the ability for ZFS to store types other than a boolean in a featureflag. The only other implemented type is a uint64_t array. It also modifies the interfaces around dataset features to accomodate the new capabilities, and adds a few new functions to increase encapsulation. This functionality will be used by the Redacted Send/Receive feature. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Closes #7981
* Fix in-kernel sysfs entriesDon Brady2018-09-061-12/+26
| | | | | | | | | | The recent sysfs zfs properties feature breaks the in-kernel builds of zfs (sans module). When not built as a module add the sysfs entries under /sys/fs/zfs/. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #7868 Closes #7872
* Pool allocation classesDon Brady2018-09-051-1/+9
| | | | | | | | | | | | | | | | | | | | Allocation Classes add the ability to have allocation classes in a pool that are dedicated to serving specific block categories, such as DDT data, metadata, and small file blocks. A pool can opt-in to this feature by adding a 'special' or 'dedup' top-level VDEV. Reviewed by: Pavel Zakharov <[email protected]> Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Alek Pinchuk <[email protected]> Reviewed-by: Håkan Johansson <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: DHE <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Gregor Kopka <[email protected]> Reviewed-by: Kash Pande <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #5182
* Add zfs module feature and property info to sysfsDon Brady2018-09-021-0/+51
| | | | | | | | | | | | | | | | | | | | | This extends our sysfs '/sys/module/zfs' entry to include feature and property attributes. The primary consumer of this information is user processes, like the zfs CLI, that need to know what the current loaded ZFS module supports. The libzfs binary will consult this information when instantiating the zfs and zpool property tables and the pool features table. This introduces 4 kernel objects (dirs) into '/sys/module/zfs' with corresponding attributes (files): features.runtime features.pool properties.dataset properties.pool Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #7706
* OpenZFS 9238 - ZFS Spacemap Encoding V2Serapheim Dimitropoulos2018-07-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Gordon Ross <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
* OpenZFS 9166 - zfs storage pool checkpointSerapheim Dimitropoulos2018-06-261-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Richard Lowe <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
* Update build system and packagingBrian Behlendorf2018-05-291-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Pavel Zakharov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> TEST_ZIMPORT_SKIP="yes" Closes #7556
* OpenZFS 7614, 9064 - zfs device evacuation/removalMatthew Ahrens2018-04-141-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <[email protected]> Reviewed-by: Alex Reece <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Prakash Surya <[email protected]> Reviewed by: Richard Laager <[email protected]> Reviewed by: Tim Chase <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
* Project Quota on ZFSNasf-Fan2018-02-131-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by Ned Bass <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Fan Yong <[email protected]> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
* Undo c89 workarounds to match with upstreamDon Brady2017-11-041-12/+4
| | | | | | | | | With PR 5756 the zfs module now supports c99 and the remaining past c89 workarounds can be undone. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #6816
* Native Encryption for ZFS on LinuxTom Caputi2017-08-141-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Jorgen Lundman <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #494 Closes #5769
* Add libtpool (thread pools)Brian Behlendorf2017-08-091-0/+330
OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6442
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 22:44:11 +0000