aboutsummaryrefslogtreecommitdiffstats
path: root/man
Commit message (Collapse)AuthorAgeFilesLines
* Add parity generation/rebuild using AVX-512 for x86-64Romain Dolbeau2016-11-021-0/+2
| | | | | | | | | | | | | | | avx512f should work on all AVX512 hardware, since it only uses Foundation instructions. avx512bw should be faster on hardware supporting the AVW512BW extension. We can use full-width pshufb (instead of relying on the 256 bits AVX2 pshufb). As a side-effect, the code is also unrolled more. Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Gvozden Neskovic <[email protected]> Reviewed-by: Jinshan Xiong <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Romain Dolbeau <[email protected]> Closes #5219
* Disable zio_dva_throttle_enabled by defaultBrian Behlendorf2016-10-261-1/+1
| | | | | | | | | | Until it can be determined definitively that a performance regression wasn't introduced accidentally by 3dfb57a this functionality is being disabled by default. It can be re- enabled by setting zio_dva_throttle_enabled=1. Signed-off-by: Brian Behlendorf <[email protected]> Closes #5335 Issue #5289
* Allow for '-o feature@<feature>=disabled' on the command lineLOLi2016-10-251-3/+16
| | | | | | | | | | | | | Sometimes it is desirable to specifically disable one or several features directly on the 'zpool create' command line. $ zpool create -o feature@<feature>=disabled ... Original-patch-by: Turbo Fredriksson <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #3460 Closes #5142 Closes #5324
* Fletcher4 algorithm implemented in pure NEON for Aarch64 / ARMv8 64 bitsRomain Dolbeau2016-10-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This is not useful on micro-architecture with a weak NEON implementation (only 64 bits); the native version is slower & the byteswap barely faster than scalar. On A53 or A57, it's a small improvement on scalar but OK for byteswap. Results from an A53 system: 0 0 0x01 -1 0 1499068294333000 1499101101878000 implementation native byteswap scalar 1008227510 755880264 aarch64_neon 1198098720 1044818671 fastest aarch64_neon aarch64_neon Results from a A57 system: 0 0 0x01 -1 0 4407214734807033 4407233933777404 implementation native byteswap scalar 2302071241 1124873346 aarch64_neon 2542214946 2245570352 fastest aarch64_neon aarch64_neon Reviewed-by: Gvozden Neskovic <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Romain Dolbeau <[email protected]> Closes #5248
* Multipath autoreplace, control enclosure LEDs, event rate limitingTony Hutter2016-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | 1. Enable multipath autoreplace support for FMA. This extends FMA autoreplace to work with multipath disks. This requires libdevmapper to be installed at build time. 2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must be supported by the Linux SES driver for this to work. The enclosure LED scripts work for multipath devices as well. The scripts will clear the LED when the fault is cleared. 3. Rate limit ZIO delay and checksum events so as not to flood ZED ZIO delay and checksum events are rate limited to 5/sec in the zfs module. Reviewed-by: Richard Laager <[email protected]> Reviewed by: Don Brady <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #2449 Closes #3017 Closes #5159
* OpenZFS 7090 - zfs should throttle allocationsDon Brady2016-10-131-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <[email protected]> Reviewed by: Alex Reece <[email protected]> Reviewed by: Christopher Siden <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Sebastien Roy <[email protected]> Approved by: Matthew Ahrens <[email protected]> Ported-by: Don Brady <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
* Fix file permissionsBrian Behlendorf2016-10-081-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following new test cases need to have execute permissions set: userquota/groupspace_003_pos.ksh userquota/userquota_013_pos.ksh userquota/userspace_003_pos.ksh upgrade/upgrade_userobj_001_pos.ksh upgrade/setup.ksh upgrade/cleanup.ksh The following source files accidentally were marked executable: lib/libzpool/kernel.c lib/libshare/nfs.c lib/libzfs/libzfs_dataset.c lib/libzfs/libzfs_util.c tests/zfs-tests/cmd/rm_lnkcnt_zero_file/rm_lnkcnt_zero_file.c tests/zfs-tests/cmd/dir_rd_update/dir_rd_update.c cmd/zed/zed_exec.c module/icp/core/kcf_sched.c module/zfs/dsl_pool.c module/zfs/arc.c module/nvpair/nvpair.c man/man5/zfs-module-parameters.5 Reviewed-by: GeLiXin <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: Jinshan Xiong <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #5241
* Add support for user/group dnode accounting & quotaJinshan Xiong2016-10-072-2/+58
| | | | | | | | | | | | | | | | This patch tracks dnode usage for each user/group in the DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode accounting have the key prefixed with "obj-" followed by the UID/GID in string format (as done for the block accounting). A new SPA feature has been added for dnode accounting as well as a new ZPL version. The SPA feature must be enabled in the pool before upgrading the zfs filesystem. During the zfs version upgrade, a "quotacheck" will be executed by marking all dnode as dirty. ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500 Signed-off-by: Jinshan Xiong <[email protected]> Signed-off-by: Johann Lombardi <[email protected]>
* OpenZFS 6585 - sha512, skein, and edonr have an unenforced dependency on ↵ilovezfs2016-10-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | extensible dataset Authored by: ilovezfs <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Richard Laager <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported by: Tony Hutter <[email protected]> In any pool without the extensible dataset feature flag already enabled, creating a dataset with dedup set to use one of the new checksums would result in the following panic as soon as any data was added: panic[cpu0]/thread=ffffff0006761c40: feature_get_refcount(spa, feature, &refcount) != 48 (0x30 != 0x30), file: ../../common/fs/zfs/zfeature.c line 390 Inpsection showed that feature->fi_feature was 7, which is the value of SPA_FEATURE_EXTENSIBLE_DATASET in the spa_feature enum. This commit adds extensible dataset as a dependency for the sha512, edonr, and skein feature flags, which prevents the panic. OpenZFS-issue: https://www.illumos.org/issues/6585 OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/892586e8a147c02d7f4053cc405229a13e796928 Porting Notes: This code was originally from Illumos, but I actually ported it from: openzfsonosx/zfs@b62a652
* OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-RTony Hutter2016-10-032-3/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewed by: George Wilson <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Saso Kiselkov <[email protected]> Reviewed by: Richard Lowe <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported by: Tony Hutter <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/4185 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee Porting Notes: This code is ported on top of the Illumos Crypto Framework code: https://github.com/zfsonlinux/zfs/pull/4329/commits/b5e030c8dbb9cd393d313571dee4756fbba8c22d The list of porting changes includes: - Copied module/icp/include/sha2/sha2.h directly from illumos - Removed from module/icp/algs/sha2/sha2.c: #pragma inline(SHA256Init, SHA384Init, SHA512Init) - Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since it now takes in an extra parameter. - Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c - Added skein & edonr to libicp/Makefile.am - Added sha512.S. It was generated from sha512-x86_64.pl in Illumos. - Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument. - In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section to not #include the non-existant endian.h. - In skein_test.c, renane NULL to 0 in "no test vector" array entries to get around a compiler warning. - Fixup test files: - Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>, - Remove <note.h> and define NOTE() as NOP. - Define u_longlong_t - Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p" - Rename NULL to 0 in "no test vector" array entries to get around a compiler warning. - Remove "for isa in $($ISAINFO); do" stuff - Add/update Makefiles - Add some userspace headers like stdio.h/stdlib.h in places of sys/types.h. - EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules. - Update scripts/zfs2zol-patch.sed - include <sys/sha2.h> in sha2_impl.h - Add sha2.h to include/sys/Makefile.am - Add skein and edonr dirs to icp Makefile - Add new checksums to zpool_get.cfg - Move checksum switch block from zfs_secpolicy_setprop() to zfs_check_settable() - Fix -Wuninitialized error in edonr_byteorder.h on PPC - Fix stack frame size errors on ARM32 - Don't unroll loops in Skein on 32-bit to save stack space - Add memory barriers in sha2.c on 32-bit to save stack space - Add filetest_001_pos.ksh checksum sanity test - Add option to write psudorandom data in file_write utility
* Add parity generation/rebuild using 128-bits NEON for Aarch64Romain Dolbeau2016-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This re-use the framework established for SSE2, SSSE3 and AVX2. However, GCC is using FP registers on Aarch64, so unlike SSE/AVX2 we can't rely on the registers being left alone between ASM statements. So instead, the NEON code uses C variables and GCC extended ASM syntax. Note that since the kernel explicitly disable vector registers, they have to be locally re-enabled explicitly. As we use the variable's number to define the symbolic name, and GCC won't allow duplicate symbolic names, numbers have to be unique. Even when the code is not going to be used (e.g. the case for 4 registers when using the macro with only 2). Only the actually used variables should be declared, otherwise the build will fails in debug mode. This requires the replacement of the XOR(X,X) syntax by a new ZERO(X) macro, which does the same thing but without repeating the argument. And perhaps someday there will be a machine where there is a more efficient way to zero a register than XOR with itself. This affects scalar, SSE2, SSSE3 and AVX2 as they need the new macro. It's possible to write faster implementations (different scheduling, different unrolling, interleaving NEON and scalar, ...) for various cores, but this one has the advantage of fitting in the current state of the code, and thus is likely easier to review/check/merge. The only difference between aarch64-neon and aarch64-neonx2 is that aarch64-neonx2 unroll some functions some more. Reviewed-by: Gvozden Neskovic <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Romain Dolbeau <[email protected]> Closes #4801
* Enable ignore_hole_birth module option by defaultBrian Behlendorf2016-09-161-1/+1
| | | | | | | | | Enable ignore_hole_birth by default until all known hole birth bugs have been resolved and relevant test cases added. Reviewed-by: Boris Protopopov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4809 Closes #5099
* DLPX-40252 integrate EP-476 compressed zfs send/receiveDan Kimmel2016-09-131-3/+35
| | | | | | | | Authored by: Dan Kimmel <[email protected]> Reviewed by: Tom Caputi <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Ported by: David Quigley <[email protected]> Issue #5078
* OpenZFS 6950 - ARC should cache compressed dataGeorge Wilson2016-09-131-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: George Wilson <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Tom Caputi <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Ported by: David Quigley <[email protected]> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
* Add zfs_arc_meta_limit_percent tunableGeLiXin2016-08-231-6/+37
| | | | | | | | | | | | | | | | ARC will evict meta buffers that exceed the arc_meta_limit. Before a further investigating on whether we should take special protection on meta buffers, this tunable make arc_meta_limit adjustable for different workloads. People can set zfs_arc_meta_limit_percent to any value while insmod zfs.ko, so some range check is added to guarantee a suitable arc_meta_limit. Suggested by Tim Chase, zfs_arc_dnode_limit is changed to a percent-style tunable as well. Signed-off-by: GeLiXin <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4957
* Fletcher4 implementation using avx512f instruction setGvozden Neskovic2016-08-161-8/+8
| | | | | | | | | | | | | | | | | | | | | | Algorithm runs 8 parallel sums, consuming 8x uint32_t elements per loop iteration. Size alignment of main fletcher4 methods is adjusted accordingly. New implementation is called 'avx512f'. Note: byteswap method can be implemented more efficiently when avx512bw hardware becomes available. Currently, it is ~ 2x slower than native method. Table shows result of full (native) fletcher4 calculation for different buffer size: fletcher4 4KB 16KB 64KB 128KB 256KB 1MB 16MB -------------------------------------------------------------------- [scalar] 1213 1228 1231 1231 1225 1200 1160 [sse2] 2374 2442 2459 2456 2462 2250 2220 [avx2] 4288 4753 4871 4893 4900 4050 3882 [avx512f] 5975 8445 9196 9221 9262 6307 5620 Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4952
* Add tunable to ignore hole_birthRich Ercolani2016-08-151-0/+13
| | | | | | | | | | | Adds a module option which disables the hole_birth optimization which has been responsible for several recent bugs, including issue #4050. Original-patch: https://gist.github.com/pcd1193182/2c0cd47211f3aee623958b4698836c48 Signed-off-by: Rich Ercolani <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4833
* Limit the amount of dnode metadata in the ARCTim Chase2016-07-251-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Metadata-intensive workloads can cause the ARC to become permanently filled with dnode_t objects as they're pinned by the VFS layer. Subsequent data-intensive workloads may only benefit from about 25% of the potential ARC (arc_c_max - arc_meta_limit). In order to help track metadata usage more precisely, the other_size metadata arcstat has replaced with dbuf_size, dnode_size and bonus_size. The new zfs_arc_dnode_limit tunable, which defaults to 10% of zfs_arc_meta_limit, defines the minimum number of bytes which is desirable to be consumed by dnodes. Attempts to evict non-metadata will trigger async prune tasks if the space used by dnodes exceeds this limit. The new zfs_arc_dnode_reduce_percent tunable specifies the amount by which the excess dnode space is attempted to be pruned as a percentage of the amount by which zfs_arc_dnode_limit is being exceeded. By default, it tries to unpin 10% of the dnodes. The problem of dnode metadata pinning was observed with the following testing procedure (in this example, zfs_arc_max is set to 4GiB): - Create a large number of small files until arc_meta_used exceeds arc_meta_limit (3GiB with default tuning) and arc_prune starts increasing. - Create a 3GiB file with dd. Observe arc_mata_used. It will still be around 3GiB. - Repeatedly read the 3GiB file and observe arc_meta_limit as before. It will continue to stay around 3GiB. With this modification, space for the 3GiB file is gradually made available as subsequent demands on the ARC are made. The previous behavior can be restored by setting zfs_arc_dnode_limit to the same value as the zfs_arc_meta_limit. Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4345 Issue #4512 Issue #4773 Closes #4858
* Fixes and enhancements of SIMD raidz parityGvozden Neskovic2016-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | - Implementation lock replaced with atomic variable - Trailing whitespace is removed from user specified parameter, to enhance experience when using commands that add newline, e.g. `echo` - raidz_test: remove dependency on `getrusage()` and RUSAGE_THREAD, Issue #4813 - silence `cppcheck` in vdev_raidz, partial solution of Issue #1392 - Minor fixes and cleanups - Enable use of original parity methods in [fastest] configuration. New opaque original ops structure, representing native methods, is added to supported raidz methods. Original parity methods are executed if selected implementation has NULL fn pointer. Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4813 Issue #1392
* Implementation of SSE optimized Fletcher-4Tyler J. Stachecki2016-07-151-5/+9
| | | | | | | | | | | | | | | | | | | | | | Builds off of 1eeb4562 (Implementation of AVX2 optimized Fletcher-4) This commit adds another implementation of the Fletcher-4 algorithm. It is automatically selected at module load if it benchmarks higher than all other available implementations. The module benchmark was also amended to analyze the performance of the byteswap-ed version of Fletcher-4, as well as the non-byteswaped version. The average performance of the two is used to select the the fastest implementation available on the host system. Adds a pair of fields to an existing zcommon module parameter: - zfs_fletcher_4_impl (str) "sse2" - new SSE2 implementation if available "ssse3" - new SSSE3 implementation if available Signed-off-by: Tyler J. Stachecki <[email protected]> Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4789
* Add RAID-Z routines for SSE2 instruction set, in x86_64 mode.Gvozden Neskovic2016-07-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch covers low-end and older x86 CPUs. Parity generation is equivalent to SSSE3 implementation, but reconstruction is somewhat slower. Previous 'sse' implementation is renamed to 'ssse3' to indicate highest instruction set used. Benchmark results: scalar_rec_p 4 720476442 scalar_rec_q 4 187462804 scalar_rec_r 4 138996096 scalar_rec_pq 4 140834951 scalar_rec_pr 4 129332035 scalar_rec_qr 4 81619194 scalar_rec_pqr 4 53376668 sse2_rec_p 4 2427757064 sse2_rec_q 4 747120861 sse2_rec_r 4 499871637 sse2_rec_pq 4 522403710 sse2_rec_pr 4 464632780 sse2_rec_qr 4 319124434 sse2_rec_pqr 4 205794190 ssse3_rec_p 4 2519939444 ssse3_rec_q 4 1003019289 ssse3_rec_r 4 616428767 ssse3_rec_pq 4 706326396 ssse3_rec_pr 4 570493618 ssse3_rec_qr 4 400185250 ssse3_rec_pqr 4 377541245 original_rec_p 4 691658568 original_rec_q 4 195510948 original_rec_r 4 26075538 original_rec_pq 4 103087368 original_rec_pr 4 15767058 original_rec_qr 4 15513175 original_rec_pqr 4 10746357 Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4783
* OpenZFS 6393 - zfs receive a full send as a clonePaul Dagnelie2016-06-281-2/+7
| | | | | | | | | | | | Authored by: Paul Dagnelie <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Richard Elling <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/6394 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68ecb2e
* OpenZFS 2605, 6980, 6902Matthew Ahrens2016-06-281-33/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2605 want to resume interrupted zfs send Reviewed by: George Wilson <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Richard Elling <[email protected]> Reviewed by: Xin Li <[email protected]> Reviewed by: Arne Jansen <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: kernelOfTruth <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: George Wilson <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
* Implement large_dnode pool featureNed Bass2016-06-242-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3542
* SIMD implementation of vdev_raidz generate and reconstruct routinesGvozden Neskovic2016-06-213-2/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new implementation of RAIDZ1/2/3 routines using x86_64 scalar, SSE, and AVX2 instruction sets. Included are 3 parity generation routines (P, PQ, and PQR) and 7 reconstruction routines, for all RAIDZ level. On module load, a quick benchmark of supported routines will select the fastest for each operation and they will be used at runtime. Original implementation is still present and can be selected via module parameter. Patch contains: - specialized gen/rec routines for all RAIDZ levels, - new scalar raidz implementation (unrolled), - two x86_64 SIMD implementations (SSE and AVX2 instructions sets), - fastest routines selected on module load (benchmark). - cmd/raidz_test - verify and benchmark all implementations - added raidz_test to the ZFS Test Suite New zfs module parameters: - zfs_vdev_raidz_impl (str): selects the implementation to use. On module load, the parameter will only accept first 3 options, and the other implementations can be set once module is finished loading. Possible values for this option are: "fastest" - use the fastest math available "original" - use the original raidz code "scalar" - new scalar impl "sse" - new SSE impl if available "avx2" - new AVX2 impl if available See contents of `/sys/module/zfs/parameters/zfs_vdev_raidz_impl` to get the list of supported values. If an implementation is not supported on the system, it will not be shown. Currently selected option is enclosed in `[]`. Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4328
* Add `zfs allow` and `zfs unallow` supportBrian Behlendorf2016-06-071-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZFS allows for specific permissions to be delegated to normal users with the `zfs allow` and `zfs unallow` commands. In addition, non- privileged users should be able to run all of the following commands: * zpool [list | iostat | status | get] * zfs [list | get] Historically this functionality was not available on Linux. In order to add it the secpolicy_* functions needed to be implemented and mapped to the equivalent Linux capability. Only then could the permissions on the `/dev/zfs` be relaxed and the internal ZFS permission checks used. Even with this change some limitations remain. Under Linux only the root user is allowed to modify the namespace (unless it's a private namespace). This means the mount, mountpoint, canmount, unmount, and remount delegations cannot be supported with the existing code. It may be possible to add this functionality in the future. This functionality was validated with the cli_user and delegation test cases from the ZFS Test Suite. These tests exhaustively verify each of the supported permissions which can be delegated and ensures only an authorized user can perform it. Two minor bug fixes were required for test-running.py. First, the Timer() object cannot be safely created in a `try:` block when there is an unconditional `finally` block which references it. Second, when running as a normal user also check for scripts using the both the .ksh and .sh suffixes. Finally, existing users who are simulating delegations by setting group permissions on the /dev/zfs device should revert that customization when updating to a version with this change. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #362 Closes #434 Closes #4100 Closes #4394 Closes #4410 Closes #4487
* Implementation of AVX2 optimized Fletcher-4Jinshan Xiong2016-06-021-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | New functionality: - Preserves existing scalar implementation. - Adds AVX2 optimized Fletcher-4 computation. - Fastest routines selected on module load (benchmark). - Test case for Fletcher-4 added to ztest. New zcommon module parameters: - zfs_fletcher_4_impl (str): selects the implementation to use. "fastest" - use the fastest version available "cycle" - cycle trough all available impl for ztest "scalar" - use the original version "avx2" - new AVX2 implementation if available Performance comparison (Intel i7 CPU, 1MB data buffers): - Scalar: 4216 MB/s - AVX2: 14499 MB/s See contents of `/sys/module/zcommon/parameters/zfs_fletcher_4_impl` to get list of supported values. If an implementation is not supported on the system, it will not be shown. Currently selected option is enclosed in `[]`. Signed-off-by: Jinshan Xiong <[email protected]> Signed-off-by: Andreas Dilger <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4330
* OpenZFS 6531 - Provide mechanism to artificially limit disk performanceTony Hutter2016-05-261-0/+33
| | | | | | | | | | | | | | | | | | | Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Approved by: Dan McDonald <[email protected]> Ported by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/6531 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130 Porting notes: - Added new IO delay tracepoints, and moved common ZIO tracepoint macros to a new trace_common.h file. - Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function. - Updated zinject man page - Updated zpool_scrub test files
* Add request size histograms (-r) to zpool iostat, minor man page fixTony Hutter2016-05-251-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add -r option to "zpool iostat" to print request size histograms for the leaf ZIOs. This includes histograms of individual ZIOs ("ind") and aggregate ZIOs ("agg"). These stats can be useful for seeing how well the ZFS IO aggregator is working. $ zpool iostat -r mypool sync_read sync_write async_read async_write scrub req_size ind agg ind agg ind agg ind agg ind agg ---------- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 512 0 0 0 0 0 0 530 0 0 0 1K 0 0 260 0 0 0 116 246 0 0 2K 0 0 0 0 0 0 0 431 0 0 4K 0 0 0 0 0 0 3 107 0 0 8K 15 0 35 0 0 0 0 6 0 0 16K 0 0 0 0 0 0 0 39 0 0 32K 0 0 0 0 0 0 0 0 0 0 64K 20 0 40 0 0 0 0 0 0 0 128K 0 0 20 0 0 0 0 0 0 0 256K 0 0 0 0 0 0 0 0 0 0 512K 0 0 0 0 0 0 0 0 0 0 1M 0 0 0 0 0 0 0 0 0 0 2M 0 0 0 0 0 0 0 0 0 0 4M 0 0 0 0 0 0 155 19 0 0 8M 0 0 0 0 0 0 0 811 0 0 16M 0 0 0 0 0 0 0 68 0 0 -------------------------------------------------------------------------------- Also rename the stray "-G" in the man page to be "-w" for latency histograms. Signed-off-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Tim Chase <[email protected]> Closes #4659
* Improve zfs-module-parameters(5)DHE2016-05-233-55/+97
| | | | | | | | | | | Various rewrites to the descriptions of module parameters. Corrects spelling mistakes, makes descriptions them more user-friendly and describes some ZFS quirks which should be understood before changing parameter values. Signed-off-by: DHE <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4671
* Consistently use parsable instead of parseableChrister Ekholm2016-05-231-2/+2
| | | | | | | | | This is a purely cosmetical change, to consistently prefer one of two (both acceptable) choises for the word parsable in documentation and code. I don't really care which to use, but acording to wiktionary https://en.wiktionary.org/wiki/parsable#English parsable is preferred. Signed-off-by: Brian Behlendorf <[email protected]> Closes #4682
* Remove additional cruft from manpagesBrian Behlendorf2016-05-171-40/+0
| | | | | | | | | These changes should have been part of the original 930b0d4 commit but were overlooked because 193a37c had not yet been merged when the original change was ported. Signed-off-by: Brian Behlendorf <[email protected]> Issue #4631
* zfs.8: Relative paths must start with ./Richard Laager2016-05-161-1/+1
| | | | | | | | Simply containing a slash is not enough, presumably because foo/bar could be either a dataset or a mountpoint. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Laager <[email protected]> Closes #4655
* Illumos 1644 add ZFS "clones" propertyMatthew Ahrens2016-05-161-2/+2
| | | | | | | | | | | | Reviewed by: Richard Lowe <[email protected]> Reviewed by: George Wilson <[email protected]> Approved by: Gordon Ross <[email protected]> References: https://www.illumos.org/issues/1644 Ported-by: Richard Laager <[email protected]> Signed-off-by: Richard Laager <[email protected]>
* Illumos 1502 Remove conversion cruft from manpagesRichard Laager2016-05-162-440/+0
| | | | | | | | | | | | | | | Reviewed by: Alexander Eremin <[email protected]> Reviewed by: Gordon Ross <[email protected]> Reviewed by: Garrett D'Amore <[email protected]> References: https://www.illumos.org/issues/1502 Ported-by: Richard Laager <[email protected]> Signed-off-by: Richard Laager <[email protected]> Conflicts: man/man8/zpool.8
* zfs.8 & mount.zfs.8: fix a few typosRuben Kerkhof2016-05-162-5/+5
| | | | | | | filesytem -> filesystem defntext -> defcontext Signed-off-by: Ruben Kerkhof <[email protected]>
* zfs.8 & zpool.8: Standardize property value orderRichard Laager2016-05-162-34/+34
| | | | | | The default value is now always listed first. Signed-off-by: Richard Laager <[email protected]>
* zfs.8 & zpool.8: Various documentation editsRichard Laager2016-05-162-63/+80
| | | | Signed-off-by: Richard Laager <[email protected]>
* zfs.8: Improve zfs upgrade documentationRichard Laager2016-05-161-5/+17
| | | | Signed-off-by: Richard Laager <[email protected]>
* zfs.8: Cleanup stray codeRichard Laager2016-05-161-4/+0
| | | | | | Bad copy-and-paste? Signed-off-by: Richard Laager <[email protected]>
* zfs.8 & zpool.8: Drop legal/illegalRichard Laager2016-05-162-3/+3
| | | | | | | There's a convention in documentation that these words not be used to mean "invalid". Signed-off-by: Richard Laager <[email protected]>
* zfs.8: Fix minor typos and the likeRichard Laager2016-05-161-10/+10
| | | | | | This commit only contains the most trivial of changes. Signed-off-by: Richard Laager <[email protected]>
* zfs.8: Rework native vs user propertiesRichard Laager2016-05-161-8/+13
| | | | Signed-off-by: Richard Laager <[email protected]>
* zfs.8 & zpool.8: Linux/Solaris differencesRichard Laager2016-05-162-5/+19
| | | | Signed-off-by: Richard Laager <[email protected]>
* zfs.8: Improve mount option documentationRichard Laager2016-05-161-8/+29
| | | | | | | | | This change is primarily about adding inline references in the properties section to the traditional mount option names. There are some other editorial changes too. Signed-off-by: Richard Laager <[email protected]>
* zfs.8: Improve consistency in size documentationRichard Laager2016-05-161-17/+15
| | | | Signed-off-by: Richard Laager <[email protected]>
* zfs.8: Drop references to Oracle documentationRichard Laager2016-05-161-2/+2
| | | | Signed-off-by: Richard Laager <[email protected]>
* zfs.8: zfs get and zfs list accept mountpointsRichard Laager2016-05-161-5/+6
| | | | Signed-off-by: Richard Laager <[email protected]>
* Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queuesTony Hutter2016-05-121-3/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the zfs module to collect statistics on average latencies, queue sizes, and keep an internal histogram of all IO latencies. Along with this, update "zpool iostat" with some new options to print out the stats: -l: Include average IO latencies stats: total_wait disk_wait syncq_wait asyncq_wait scrub read write read write read write read write wait ----- ----- ----- ----- ----- ----- ----- ----- ----- - 41ms - 2ms - 46ms - 4ms - - 5ms - 1ms - 1us - 4ms - - 5ms - 1ms - 1us - 4ms - - - - - - - - - - - 49ms - 2ms - 47ms - - - - - - - - - - - - - 2ms - 1ms - - - 1ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- 1ms 1ms 1ms 413us 16us 25us - 5ms - 1ms 1ms 1ms 413us 16us 25us - 5ms - 2ms 1ms 2ms 412us 26us 25us - 5ms - - 1ms - 413us - 25us - 5ms - - 1ms - 460us - 29us - 5ms - 196us 1ms 196us 370us 7us 23us - 5ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- -w: Print out latency histograms: sdb total disk sync_queue async_queue latency read write read write read write read write scrub ------- ------ ------ ------ ------ ------ ------ ------ ------ ------ 1ns 0 0 0 0 0 0 0 0 0 ... 33us 0 0 0 0 0 0 0 0 0 66us 0 0 107 2486 2 788 12 12 0 131us 2 797 359 4499 10 558 184 184 6 262us 22 801 264 1563 10 286 287 287 24 524us 87 575 71 52086 15 1063 136 136 92 1ms 152 1190 5 41292 4 1693 252 252 141 2ms 245 2018 0 50007 0 2322 371 371 220 4ms 189 7455 22 162957 0 3912 6726 6726 199 8ms 108 9461 0 102320 0 5775 2526 2526 86 17ms 23 11287 0 37142 0 8043 1813 1813 19 34ms 0 14725 0 24015 0 11732 3071 3071 0 67ms 0 23597 0 7914 0 18113 5025 5025 0 134ms 0 33798 0 254 0 25755 7326 7326 0 268ms 0 51780 0 12 0 41593 10002 10002 0 537ms 0 77808 0 0 0 64255 13120 13120 0 1s 0 105281 0 0 0 83805 20841 20841 0 2s 0 88248 0 0 0 73772 14006 14006 0 4s 0 47266 0 0 0 29783 17176 17176 0 9s 0 10460 0 0 0 4130 6295 6295 0 17s 0 0 0 0 0 0 0 0 0 34s 0 0 0 0 0 0 0 0 0 69s 0 0 0 0 0 0 0 0 0 137s 0 0 0 0 0 0 0 0 0 ------------------------------------------------------------------------------- -h: Help -H: Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -q: Include current number of entries in sync & async read/write queues, and scrub queue: syncq_read syncq_write asyncq_read asyncq_write scrubq_read pend activ pend activ pend activ pend activ pend activ ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 0 0 78 29 0 0 0 0 0 0 0 0 78 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 227 394 0 19 0 0 0 0 0 0 227 394 0 19 0 0 0 0 0 0 108 98 0 19 0 0 0 0 0 0 19 98 0 0 0 0 0 0 0 0 78 98 0 0 0 0 0 0 0 0 19 88 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -p: Display numbers in parseable (exact) values. Also, update iostat syntax to allow the user to specify specific vdevs to show statistics for. The three options for choosing pools/vdevs are: Display a list of pools: zpool iostat ... [pool ...] Display a list of vdevs from a specific pool: zpool iostat ... [pool vdev ...] Display a list of vdevs from any pools: zpool iostat ... [vdev ...] Lastly, allow zpool command "interval" value to be floating point: zpool iostat -v 0.5 Signed-off-by: Tony Hutter <[email protected] Signed-off-by: Brian Behlendorf <[email protected]> Closes #4433
* OpenZFS 3993, 4700Adam Stevko2016-05-111-9/+34
| | | | | | | | | | | | | | | | | | | | 3993 zpool(1M) and zfs(1M) should support -p for "list" and "get" 4700 "zpool get" doesn't support -H or -o options Reviewed by: Dan McDonald <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/3993 OpenZFS-issue: https://www.illumos.org/issues/4700 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c58b352 Porting notes: I removed ZoL's zpool_get_prop_literal() in favor of zpool_get_prop(..., boolean_t literal) since that's what OpenZFS uses. The functionality is the same.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 15:25:30 +0000