aboutsummaryrefslogtreecommitdiffstats
path: root/man
Commit message (Collapse)AuthorAgeFilesLines
* OpenZFS 9617 - too-frequent TXG sync causes excessive write inflationMatthew Ahrens2018-10-041-3/+5
| | | | | | | | | | | | | | | | | | | | Porting notes: * Renamed zfs_dirty_data_sync_pct to zfs_dirty_data_sync_percent and changed the type to be consistent with the other dirty module params. * Updated zfs-module-parameters.5 accordingly. Authored by: Matthew Ahrens <[email protected]> Reviewed by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Brad Lewis <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Andrew Stormont <[email protected]> Reviewed-by: George Melikov <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://illumos.org/issues/9617 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7928f4ba Closes #7976
* OpenZFS 9763 - zfs(1M): broken formatting in allow/unallow descriptionYuri Pankov2018-10-021-2/+3
| | | | | | | | | | | | | | | | Porting notes: * Two of the three changes from the upstream patch were already applied for Linux. Only the last one is required. Authored by: Yuri Pankov <[email protected]> Reviewed by: Robert Mustacchi <[email protected]> Reviewed-by: George Melikov <[email protected]> Approved by: Gordon Ross <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://illumos.org/issues/9763 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8a702e55 Closes #7972
* Refine split block reconstructionBrian Behlendorf2018-10-011-1/+1
| | | | | | | | | | | | | | | | | | | | | Due to a flaw in 4589f3ae the number of unique combinations could be calculated incorrectly. This could result in the random combinations reconstruction being used when it would have been possible to check all combinations. This change fixes the unique combinations calculation and simplifies the reconstruction logic by maintaining a per- segment list of unique copies. The vdev_indirect_splits_damage() function was introduced to validate both the enumeration and random reconstruction logic with ztest. It is implemented such it will never make a known recoverable block unrecoverable. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Serapheim Dimitropoulos <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #6900 Closes #7934
* Fix reference to zpool-features(5)DeHackEd2018-09-211-1/+1
| | | | | | | | Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Laager <[email protected]> Signed-off-by: DHE <[email protected]> Closes #7938
* Fix allocation_classes GUID in zpool-features(5)DeHackEd2018-09-181-1/+1
| | | | | | | Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Laager <[email protected]> Signed-off-by: DHE <[email protected]> Closes #7920
* Man page fixes - zpool/zfs optional parametersGregor Kopka2018-09-182-4/+4
| | | | | | | | | | The man pages for zpool and zfs (get command) listed the pool/dataset parameter as required, but these are optional. Fixed that. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Gregor Kopka <[email protected]> Closes #7916
* Clarify 'zpool remove' restrictionsBrian Behlendorf2018-09-171-4/+8
| | | | | | | | | | | Update zpool(8) to clarify what type of vdevs may be safely removed and that the existence of any top-level raidz device which is part of the primary pool will prevent device removal. Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7880 Closes #7893
* Fix 'zfs allow' for create time permissionsLOLi2018-09-061-2/+4
| | | | | | | | | | | | | | When no permission set is defined for a dataset the create time permissions are incorrectly shown as if they were a permission set. This change simply correct how allow permissions are displayed. This commit also fixes a small manpage formatting issue and adds the "zfs_allow_003_pos" test case to the ZFS Test Suite. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #7519 Closes #7860
* Pool allocation classesDon Brady2018-09-054-0/+93
| | | | | | | | | | | | | | | | | | | | Allocation Classes add the ability to have allocation classes in a pool that are dedicated to serving specific block categories, such as DDT data, metadata, and small file blocks. A pool can opt-in to this feature by adding a 'special' or 'dedup' top-level VDEV. Reviewed by: Pavel Zakharov <[email protected]> Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Alek Pinchuk <[email protected]> Reviewed-by: Håkan Johansson <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: DHE <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Gregor Kopka <[email protected]> Reviewed-by: Kash Pande <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #5182
* OpenZFS 9403 - assertion failed in arc_buf_destroy()Tom Caputi2018-08-292-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assertion failed in arc_buf_destroy() when concurrently reading block with checksum error. Porting notes: * The ability to zinject decompression errors has been added, but this only works at the zio_decompress() level, where we have all of the info we need to match against the user's zinject options. * The decompress_fault test has been added to test the new zinject functionality * We attempted to set zio_decompress_fail_fraction to (1 << 18) in ztest for further test coverage. Although this did uncover a few low priority issues, this unfortuantely also causes ztest to ASSERT in many locations where the code is working correctly since it is designed to fail on IO errors. Developers can manually set this variable with the '-o' option to find and debug issues. Authored by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Matt Ahrens <[email protected]> Ported-by: Tom Caputi <[email protected]> OpenZFS-issue: https://illumos.org/issues/9403 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/fa98e487a9 Closes #7822
* Introduce read/write kstats per datasetSerapheim Dimitropoulos2018-08-202-1/+20
| | | | | | | | | | | | | The following patch introduces a few statistics on reads and writes grouped by dataset. These statistics are implemented as kstats (backed by aggregate sums for performance) and can be retrieved by using the dataset objset ID number. The motivation for this change is to provide some preliminary analytics on dataset usage/performance. Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Serapheim Dimitropoulos <[email protected]> Closes #7705
* 'zfs holds' scripted mode is not documentedLOLi2018-08-181-2/+4
| | | | | | | | | | This change simply documents the existing "scripted mode" option in both command help and man page. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #7798
* Added encryption support for zfs recv -o / -xTom Caputi2018-08-151-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | One small integration that was absent from b52563 was support for zfs recv -o / -x with regards to encryption parameters. The main use cases of this are as follows: * Receiving an unencrypted stream as encrypted without needing to create a "dummy" encrypted parent so that encryption can be inheritted. * Allowing users to change their keylocation on receive, so long as the receiving dataset is an encryption root. * Allowing users to explicitly exclude or override the encryption property from an unencrypted properties stream, allowing it to be received as encrypted. * Receiving a recursive heirarchy of unencrypted datasets, encrypting the top-level one and forcing all children to inherit the encryption. Reviewed-by: Jorgen Lundman <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Elling <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7650
* OpenZFS 8906 - uts: illumos rootfs should support salted cksumToomas Soome2018-07-272-16/+11
| | | | | | | | | | | | | | | | | | | | Porting notes: * As of grub-2.02 these checksums are not supported. However, as pointed out in #6501 there are alternatives such as EFISTUB which work and have no such restriction. A warning was added to the checksum property section of the zfs.8 man page. Authored by: Toomas Soome <[email protected]> Reviewed by: C Fraire <[email protected]> Reviewed by: Robert Mustacchi <[email protected]> Reviewed by: Yuri Pankov <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://illumos.org/issues/8906 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #6501 Closes #7714
* OpenZFS 9337 - zfs get all is slow due to uncached metadataMatthew Ahrens2018-07-121-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This project's goal is to make read-heavy channel programs and zfs(1m) administrative commands faster by caching all the metadata that they will need in the dbuf layer. This will prevent the data from being evicted, so that any future call to i.e. zfs get all won't have to go to disk (very much). There are two parts: The dbuf_metadata_cache. We identify what to put into the cache based on the object type of each dbuf. Caching objset properties os {version,normalization,utf8only,casesensitivity} in the objset_t. The reason these needed to be cached is that although they are queried frequently, they aren't stored in a dbuf type which we can easily recognize and cache in the dbuf layer; instead, we have to explicitly store them. There's already existing infrastructure for maintaining cached properties in the objset setup code, so I simply used that. Performance Testing: - Disabled kmem_flags - Tuned dbuf_cache_max_bytes very low (128K) - Tuned zfs_arc_max very low (64M) Created test pool with 400 filesystems, and 100 snapshots per filesystem. Later on in testing, added 600 more filesystems (with no snapshots) to make sure scaling didn't look different between snapshots and filesystems. Results: | Test | Time (trunk / diff) | I/Os (trunk / diff) | +------------------------+---------------------+---------------------+ | zpool import | 0:05 / 0:06 | 12.9k / 12.9k | | zfs get all (uncached) | 1:36 / 0:53 | 16.7k / 5.7k | | zfs get all (cached) | 1:36 / 0:51 | 16.0k / 6.0k | Authored by: Matthew Ahrens <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Thomas Caputi <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Richard Lowe <[email protected]> Ported-by: Alek Pinchuk <[email protected]> Signed-off-by: Alek Pinchuk <[email protected]> OpenZFS-issue: https://illumos.org/issues/9337 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f Closes #7668
* OpenZFS 9426 - metaslab size can exceed offset addressable by spacemapDon Brady2018-07-111-1/+12
| | | | | | | | | | | | Authored by: Don Brady <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Approved by: Dan McDonald <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/9426 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f1c88afb1 Closes #7700
* OpenZFS 9330 - stack overflow when creating a deeply nested datasetSerapheim Dimitropoulos2018-07-092-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Datasets that are deeply nested (~100 levels) are impractical. We just put a limit of 50 levels to newly created datasets. Existing datasets should work without a problem. The problem can be seen by attempting to create a dataset using the -p option with many levels: panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff fffffffffbc3aa60 unix:die+100 () fffffffffbc3ab70 unix:trap+157d () ffffff00083d7020 unix:_patch_xrstorq_rbx+196 () ffffff00083d7050 zfs:dbuf_rele+2e () ... ffffff00083d7080 zfs:dsl_dir_close+32 () ffffff00083d70b0 zfs:dsl_dir_evict+30 () ffffff00083d70d0 zfs:dbuf_evict_user+4a () ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 () ffffff00083d7130 zfs:dbuf_rele+2e () ... The block above repeats once per directory in the ... ... create -p command, working towards the root ... ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 () ffffff00083dba20 zfs:dsl_dataset_rele+42 () ffffff00083dba70 zfs:dmu_objset_prefetch+e4 () ffffff00083dbaa0 zfs:findfunc+23 () ffffff00083dbb80 zfs:dmu_objset_find_spa+38c () ffffff00083dbbc0 zfs:dmu_objset_find+40 () ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b () ffffff00083dbcc0 zfs:zfsdev_ioctl+347 () ffffff00083dbd00 genunix:cdev_ioctl+45 () ffffff00083dbd40 specfs:spec_ioctl+5a () ffffff00083dbdc0 genunix:fop_ioctl+7b () ffffff00083dbec0 genunix:ioctl+18e () ffffff00083dbf10 unix:brand_sys_sysenter+1c9 () Porting notes: * Added zfs_max_dataset_nesting module option with documentation. * Updated zfs_rename_014_neg.ksh for Linux. * Increase the zfs.sh stack warning to 15K. Enough time has passed that 16K can be reasonably assumed to be the default value. It was increased in the 3.15 kernel released in June of 2014. Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Approved by: Garrett D'Amore <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/9330 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a Closes #7681
* OpenZFS 9238 - ZFS Spacemap Encoding V2Serapheim Dimitropoulos2018-07-051-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Gordon Ross <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
* Fix formatting in zpool-features(5)Tim Chase2018-06-271-0/+5
| | | | | | | | | The formatting of the features beginning with large_blocks was broken when the zpool_checkpoint feature was added. Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7658
* OpenZFS 9521 - Add checkpoint fieldEitan Adler2018-06-271-2/+2
| | | | | | | | | | | | | | | | | | Add checkpoint field in the default list of the zpool-list man page Authored by: Eitan Adler <[email protected]> Reviewed by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: kpande <[email protected]> Reviewed by: Tim Chase <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://illumos.org/issues/9521 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c5a860f7b Closes #7658
* OpenZFS 9166 - zfs storage pool checkpointSerapheim Dimitropoulos2018-06-264-3/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Richard Lowe <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
* Fix duplicate "fB" typoajs1242018-06-251-1/+1
| | | | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: bunder2015 <[email protected]> Signed-off-by: ajs124 <[email protected]> Closes #7649
* Add tunables for channel programsJohn Gallagher2018-06-151-0/+25
| | | | | | | | | | | | This patch adds tunables for modifying the maximum memory limit and maximum instruction limit that can be specified when running a channel program. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected] Reviewed-by: Sara Hartse <[email protected]> Signed-off-by: John Gallagher <[email protected]> External-issue: LX-1085 Closes #7618
* Tunable directory for zfs runtime scriptsAntonio Russo2018-06-073-3/+3
| | | | | | | | | | | | | zpool and zed place scripts in subdirectories of libexecdir. Some distributions locate architecture independent scripts in other locations (e.g. Debian). To avoid these paths getting out of sync, centralize the definitions. Build zfs-test's default.cfg by Makefile. Use the new directory logic building tests/zfs-tests/include/default.cfg.in. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #7597
* Minor documentation, logging, and testing typosAntonio Russo2018-06-071-6/+5
| | | | | | | | | This patch collects some minor inconsistencies and typos in the documentation, logging and testing infrastructure. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #7608
* Fix typoes in zpool man pagebunder20152018-06-041-4/+9
| | | | | | | | | Fixed some highlighting in the zpool man page Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: bunder2015 <[email protected]> Closes #7596
* Update build system and packagingBrian Behlendorf2018-05-292-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Pavel Zakharov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> TEST_ZIMPORT_SKIP="yes" Closes #7556
* Merge branch 'zfsonlinux/merge-spl'Brian Behlendorf2018-05-291-0/+357
|\ | | | | | | | | | | | | | | | | | | Merge a minimal version of the zfsonlinux/spl repository in to the zfsonlinux/zfs repository. Care was taken to prevent file conflicts when merging and to preserve the spl repository history. The spl kernel module remains under the GPLv2 license as documented by the additional THIRDPARTYLICENSE.gplv2 file. Signed-off-by: Brian Behlendorf <[email protected]>
| * Prepare SPL repo to merge with ZFS repoBrian Behlendorf2018-05-294-103/+0
| | | | | | | | | | | | | | | | | | This commit removes everything from the repository except the core SPL implementation for Linux. Those files which remain have been moved to non-conflicting locations to facilitate the merge. The README.md and associated files have been updated accordingly. Signed-off-by: Brian Behlendorf <[email protected]>
| * Update spl module parameters man5 with missing parameter detailsabraunegg2017-10-271-1/+15
| | | | | | | | | | | | | | | | Update spl module parameters man5 with the following missing parameter details for spl_panic_halt. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alex Braunegg <[email protected]> Closes #664
| * spl-module-parameters.5 manpage: fix macroFabian-Gruenbichler2017-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | There is no '.sh' macro in troff/groff/man, only '.SH' for section headers. I assume .sp for a line break was intended here like in the rest of the man page. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Closes #643
| * splat.1 manpage: fix spelling of 'hexadecimal'Fabian-Gruenbichler2017-08-101-4/+4
| | | | | | | | | | | | Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Closes #642
| * Limit number of tasks shown in taskq procChunwei Chen2016-12-011-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | To prevent holding tq_lock for too long. Before zfsonlinux/zfs@8e71ab9, hogging delay tasks and cat /proc/spl/taskq would easily cause a lockup. While that bug has been fixed. It's probably still a good idea to do this just in case task lists grow too large. Reviewed-by: Tim Chase <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #586
| * Allow kicking a taskq to spawn more threadsChunwei Chen2016-02-051-0/+14
| | | | | | | | | | | | | | | | | | | | | | This patch add a module parameter spl_taskq_kick. When writing non-zero value to it, it will scan all the taskq, if a taskq contains a task pending for more than 5 seconds, it will be forced to spawn a new thread. This is use as an emergency recovery from deadlock, not a general solution. Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #529
| * Add spl_kmem_cache_kmem_threads man page entryBrian Behlendorf2016-01-121-0/+14
| | | | | | | | | | | | | | | | The spl_kmem_cache_kmem_threads module option was accidentally omitted from the documentation. Add it. Signed-off-by: Brian Behlendorf <[email protected]> Closes #512
| * Add defclsyspri macroBrian Behlendorf2015-07-231-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new defclsyspri macro which can be used to request the default Linux scheduler priority. Neither the minclsyspri or maxclsyspri map to the default Linux kernel thread priority. This makes it awkward to create taskqs which run with the same priority as the rest of the kernel threads on the system which can lead to performance issues. All SPL callers which previously used minclsyspri or maxclsyspri have been changed to use defclsyspri. The vast majority of callers were part of the test suite which won't have an external impact. The few places where it could impact performance the change was from maxclsyspri to defclsyspri. This makes it more likely the process will be scheduled which may help performance. To facilitate further performance analysis the spl_taskq_thread_priority module option has been added. When disabled (0) all newly created kernel threads will use the default kernel thread priority. When enabled (1) the specified taskq priority will be used. By default this value is enabled (1). Signed-off-by: Brian Behlendorf <[email protected]>
| * Add TASKQ_DYNAMIC featureBrian Behlendorf2015-06-241-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting the TASKQ_DYNAMIC flag will create a taskq with dynamic semantics. Initially only a single worker thread will be created to service tasks dispatched to the queue. As additional threads are needed they will be dynamically spawned up to the max number specified by 'nthreads'. When the threads are no longer needed, because the taskq is empty, they will automatically terminate. Due to the low cost of creating and destroying threads under Linux by default new threads and spawned and terminated aggressively. There are two modules options which can be tuned to adjust this behavior if needed. * spl_taskq_thread_sequential - The number of sequential tasks, without interruption, which needed to be handled by a worker thread before a new worker thread is spawned. Default 4. * spl_taskq_thread_dynamic - Provides the ability to completely disable the use of dynamic taskqs on the system. This is provided for the purposes of debugging and troubleshooting. Default 1 (enabled). This behavior is fundamentally consistent with the dynamic taskq implementation found in both illumos and FreeBSD. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Tim Chase <[email protected]> Closes #458
| * Refine slab cache sizingBrian Behlendorf2015-01-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is designed to improve the memory utilization of slabs by more carefully setting their size. The way the code currently works is problematic for slabs which contain large objects (>1MB). This is due to slabs being unconditionally rounded up to a power of two which may result in unused space at the end of the slab. The reason the existing code rounds up every slab is because it assumes it will backed by the buddy allocator. Since the buddy allocator can only performs power of two allocations this is desirable because it avoids wasting any space. However, this logic breaks down if slab is backed by vmalloc() which operates at a page level granularity. In this case, the optimal thing to do is calculate the minimum required slab size given certain constraints (object size, alignment, objects/slab, etc). Therefore, this patch reworks the spl_slab_size() function so that it sizes KMC_KMEM slabs differently than KMC_VMEM slabs. KMC_KMEM slabs are rounded up to the nearest power of two, and KMC_VMEM slabs are allowed to be the minimum required size. This change also reduces the default number of objects per slab. This reduces how much memory a single cache object can pin, which can result in significant memory saving for highly fragmented caches. But depending on the workload it may result in slabs being allocated and freed more frequently. In practice, this has been shown to be a better default for most workloads. Also the maximum slab size has been reduced to 4MB on 32-bit systems. Due to the limited virtual address space it's critical the we be as frugal as possible. A limit of 4M still lets us reasonably comfortably allocate a limited number of 1MB objects. Finally, the kmem:slab_small and kmem:slab_large SPLAT tests were extended to provide better test coverage of various object sizes and alignments. Caches are created with random parameters and their basic functionality is verified by allocating several slabs worth of objects. Signed-off-by: Brian Behlendorf <[email protected]>
| * Update spl-module-parameters(5) man pageBrian Behlendorf2015-01-161-28/+103
| | | | | | | | | | | | | | | | | | The spl-module-parameters(5) was not kept up to date. Refresh the man page so that it lists all the possible module options, describes what the do, and justify why the default values are set they way the are. Signed-off-by: Brian Behlendorf <[email protected]>
| * Make slab reclaim more aggressiveBrian Behlendorf2015-01-161-0/+22
| | | | | | | | | | | | | | | | | | | | Many people have noticed that the kmem cache implementation is slow to release its memory. This patch makes the reclaim behavior more aggressive by immediately freeing a slab once it is empty. Unused objects which are cached in the magazines will still prevent a slab from being freed. Signed-off-by: Brian Behlendorf <[email protected]>
| * Refactor generic memory allocation interfacesBrian Behlendorf2015-01-161-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <[email protected]>
| * Remove adaptive mutex implementationBrian Behlendorf2014-10-171-24/+0
| | | | | | | | | | | | | | | | Since the Linux 2.6.29 kernel all mutexes have been adaptive mutexs. There is no longer any point in keeping this code so it is being removed to simplify the code. Signed-off-by: Brian Behlendorf <[email protected]>
| * Evenly distribute the taskq threads across available CPUsAndrey Vesnovaty2014-04-251-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem is described in commit aeeb4e0c0ae75b99ebbaa3056f0afc8e12949532. However, instead of disabling the binding to CPU altogether we just keep the last CPU index across calls to taskq_create() and thus achieve even distribution of the taskq threads across all available CPUs. The implementation based on assumption that task queues initialization performed in serial manner. Signed-off-by: Andrey Vesnovaty <[email protected]> Signed-off-by: Andrey Vesnovaty <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #336
| * Remove incorrect use of EXTRA_DIST for man pagesBrian Behlendorf2014-01-172-4/+2
| | | | | | | | | | | | | | | | | | | | Setting the 'dist_' prefix is the correct way to instruct Automake to include these files in the distribution. The EXTRA_DIST variable is reserved for files which are not covered by the automatic rules. http://www.gnu.org/software/automake/manual/automake.html#Basics Signed-off-by: Brian Behlendorf <[email protected]>
| * Document SPL module parameters.Turbo Fredriksson2013-11-213-1/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | This is a first draft of a spl-module-parameters(5) man page. I have just extracted the parameter name and its description with modinfo, then checked the source what type it is and its default value. This will need more work, preferably someone that actually know these values and what to use them for. Similar to zfsonlinux/zfs#1856, but for the spl. Signed-off-by: Brian Behlendorf <[email protected]> Closes zfsonlinux/zfs#1856
| * Create splat man pageDarik Horn2013-03-193-0/+100
| | | | | | | The automake templates have been updated to install this man page and the existing packaging was updated to include it. Signed-off-by: Brian Behlendorf <[email protected]>
* OpenZFS 9486 - reduce memory used by device removal on fragmented poolsMatthew Ahrens2018-05-241-0/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device removal allocates a new location for each allocated segment on the disk that's being removed. Each allocation results in one entry in the mapping table, which maps from old location + length to new location. When a fragmented disk is removed, this can result in a large number of mapping entries, and thus a large amount of memory consumed by the mapping table. In the worst real-world cases, we've seen around 1GB of RAM per 1TB of storage removed. We can improve on this situation by allocating larger segments, which span across both allocated and free regions of the device being removed. By including free regions in the allocation (and thus mapping), we reduce the number of mapping entries. For example, if we have a 4K allocation followed by 1K free and then 4K allocated, we would allocate 4+1+4 = 9KB, and then move the entire region (including allocated and free parts). In this case we used one mapping where previously we would have used two, but often the ratio is much higher (up to 20:1 in real-world use). We then need to mark the regions that were free on the removing device as free in the new locations, and also obsolete in the mapping entry. This method preserves the fragmentation of the removing device, rather than consolidating its allocated space into a small number of chunks where possible. But it results in drastic reduction of memory used by the mapping table - around 20x in the most-fragmented cases. In the most fragmented real-world cases, this reduces memory used by the mapping from ~1GB to ~50MB of RAM per 1TB of storage removed. Less fragmented cases will typically also see around 50-100MB of RAM per 1TB of storage. Porting notes: * Add the following as module parameters: * zfs_condense_indirect_vdevs_enable * zfs_condense_max_obsolete_bytes * Document the following module parameters: * zfs_condense_indirect_vdevs_enable * zfs_condense_max_obsolete_bytes * zfs_condense_min_mapping_bytes Authored by: Matthew Ahrens <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://illumos.org/issues/9486 OpenZFS-commit: https://github.com/ahrens/illumos/commit/07152e142e44c External-issue: DLPX-57962 Closes #7536
* Ignore *.o.ur-safe build artifactsBrian Behlendorf2018-05-131-0/+1
| | | | | | | | | Generated when building on Ubuntu 18.04. Also ignore the new dynamically generated zfs-mount-generator.8 man page, and the module/.cache.mk file. Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7534
* Add canonical mount options zfs-mount-generatorAntonio Russo2018-05-112-19/+39
| | | | | | | | | | | | | | | | | | lib/libzfs/libzfs_mount.c:zfs_add_options provides the canonical mount options used by a `zfs mount` command. Because we cannot call `zfs mount` directly from a systemd.mount unit, we mirror that logic in zfs-mount-generator. The zed script is updated to cache these properties as well. Include a mini-tutorial in the manual page, properly substitute configuration paths in zfs-mount-generator.8.in, and standardize the Makefile. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Laager <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #7453
* OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recoveryPavel Zakharov2018-05-081-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes: 7638 Refactor spa_load_impl into several functions 8961 SPA load/import should tell us why it failed 7277 zdb should be able to print zfs_dbgmsg's To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened. The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned. The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened. When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs. This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition. With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss of data, this feature is for now restricted to a read-only import. Porting notes (ZTS): * Fix 'make dist' target in zpool_import * The maximum path length allowed by tar is 99 characters. Several of the new test cases exceeded this limit resulting in them not being included in the tarball. Shorten the names slightly. * Set/get tunables using accessor functions. * Get last synced txg via the "zfs_txg_history" mechanism. * Clear zinject handlers in cleanup for import_cache_device_replaced and import_rewind_device_replaced in order that the zpool can be exported if there is an error. * Increase FILESIZE to 8G in zfs-test.sh to allow for a larger ext4 file system to be created on ZFS_DISK2. Also, there's no need to partition ZFS_DISK2 at all. The partitioning had already been disabled for multipath devices. Among other things, the partitioning steals some space from the ext4 file system, makes it difficult to accurately calculate the paramters to parted and can make some of the tests fail. * Increase FS_SIZE and FILE_SIZE in the zpool_import test configuration now that FILESIZE is larger. * Write more data in order that device evacuation take lonnger in a couple tests. * Use mkdir -p to avoid errors when the directory already exists. * Remove use of sudo in import_rewind_config_changed. Authored by: Pavel Zakharov <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Andrew Stormont <[email protected]> Approved by: Hans Rosenfeld <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://illumos.org/issues/9075 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123 Closes #7459
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 23:57:18 +0000