summaryrefslogtreecommitdiffstats
path: root/lib/libspl/include
Commit message (Collapse)AuthorAgeFilesLines
* Fix type mismatch on 32-bit systemsBrian Behlendorf2015-05-111-2/+0
| | | | | | | | | | | | | | The umem_alloc_aligned() function should not assume that a 'void *' type is 64-bit. It will not be on 32-bit platforms. Rather than complicating the ASSERT to handle this it is simply removed. Additionally, the '%lu' format specifier should not be assumed to imply a 64-bit value. Fix this by using the 'llu' format specifier which will always be atleast 64-bit and explicitly casing the variable to an u_longlong_t. This issue is handled the same way in many other parts of the code. Signed-off-by: Brian Behlendorf <[email protected]>
* Illumos 3897 - zfs filesystem and snapshot limitsJerry Jelinek2015-04-282-0/+27
| | | | | | | | | | | | | | | | | | 3897 zfs filesystem and snapshot limits Author: Jerry Jelinek <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Christopher Siden <[email protected]> References: https://www.illumos.org/issues/3897 https://github.com/illumos/illumos-gate/commit/a2afb61 Porting Notes: dsl_dataset_snapshot_check(): reduce stack usage using kmem_alloc(). Ported-by: Chris Dunlop <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Swap DTRACE_PROBE* with Linux tracepointsPrakash Surya2014-11-172-37/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch leverages Linux tracepoints from within the ZFS on Linux code base. It also refactors the debug code to bring it back in sync with Illumos. The information exported via tracepoints can be used for a variety of reasons (e.g. debugging, tuning, general exploration/understanding, etc). It is advantageous to use Linux tracepoints as the mechanism to export this kind of information (as opposed to something else) for a number of reasons: * A number of external tools can make use of our tracepoints "automatically" (e.g. perf, systemtap) * Tracepoints are designed to be extremely cheap when disabled * It's one of the "accepted" ways to export this kind of information; many other kernel subsystems use tracepoints too. Unfortunately, though, there are a few caveats as well: * Linux tracepoints appear to only be available to GPL licensed modules due to the way certain kernel functions are exported. Thus, to actually make use of the tracepoints introduced by this patch, one might have to patch and re-compile the kernel; exporting the necessary functions to non-GPL modules. * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux tracepoints are not available for unsigned kernel modules (tracepoints will get disabled due to the module's 'F' taint). Thus, one either has to sign the zfs kernel module prior to loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or newer. Assuming the above two requirements are satisfied, lets look at an example of how this patch can be used and what information it exposes (all commands run as 'root'): # list all zfs tracepoints available $ ls /sys/kernel/debug/tracing/events/zfs enable filter zfs_arc__delete zfs_arc__evict zfs_arc__hit zfs_arc__miss zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write zfs_new_state__mfu zfs_new_state__mru # enable all zfs tracepoints, clear the tracepoint ring buffer $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable $ echo 0 > /sys/kernel/debug/tracing/trace # import zpool called 'tank', inspect tracepoint data (each line was # truncated, they're too long for a commit message otherwise) $ zpool import tank $ cat /sys/kernel/debug/tracing/trace | head -n35 # tracer: nop # # entries-in-buffer/entries-written: 1219/1219 #P:8 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr... z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr... z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr... z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ... lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr... z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr... z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru... lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr... z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr... z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru... lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ... lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ... To highlight the kind of detailed information that is being exported using this infrastructure, I've taken the first tracepoint line from the output above and reformatted it such that it fits in 80 columns: lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr { dva 0x1:0x40082 birth 15491 cksum0 0x163edbff3a flags 0x640 datacnt 1 type 1 size 2048 spa 3133524293419867460 state_type 0 access 0 mru_hits 0 mru_ghost_hits 0 mfu_hits 0 mfu_ghost_hits 0 l2_hits 0 refcount 1 } bp { dva0 0x1:0x40082 dva1 0x1:0x3000e5 dva2 0x1:0x5a006e cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00 lsize 2048 } zb { objset 0 object 0 level -1 blkid 0 } For the specific tracepoint shown here, 'zfs_arc__miss', data is exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!). This kind of precise and detailed information can be extremely valuable when trying to answer certain kinds of questions. For anybody unfamiliar but looking to build on this, I found the XFS source code along with the following three web links to be extremely helpful: * http://lwn.net/Articles/379903/ * http://lwn.net/Articles/381064/ * http://lwn.net/Articles/383362/ I should also node the more "boring" aspects of this patch: * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to support a sixth paramter. This parameter is used to populate the contents of the new conftest.h file. If no sixth parameter is provided, conftest.h will be empty. * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced. This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro, except it has support for a fifth option that is then passed as the sixth parameter to ZFS_LINUX_COMPILE_IFELSE. These autoconf changes were needed to test the availability of the Linux tracepoint macros. Due to the odd nature of the Linux tracepoint macro API, a separate ".h" must be created (the path and filename is used internally by the kernel's define_trace.h file). * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This is to determine if we can safely enable the Linux tracepoint functionality. We need to selectively disable the tracepoint code due to the kernel exporting certain functions as GPL only. Without this check, the build process will fail at link time. In addition, the SET_ERROR macro was modified into a tracepoint as well. To do this, the 'sdt.h' file was moved into the 'include/sys' directory and now contains a userspace portion and a kernel space portion. The dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as well. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Ned Bass <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Update utsname supportBrian Behlendorf2014-10-172-35/+0
| | | | | | | | | | | | | | | | | | Modify the code to use the utsname() kernel function rather than a global variable. This results is cleaner more portable code because utsname() is already provided by the kernel and can be easily emulated in user space via uname(2). This means that it will behave consistently in both contexts. This is also has the benefit that it allows the removal of a few _KERNEL pre-processor conditions. And it also is a pre-requisite for a proper FUSE port because we need to provide a valid utsname. Finally, it allows us to remove this functionality from the SPL and all the related compatibility code. Signed-off-by: Brian Behlendorf <[email protected]> Issue #2757
* Retire HAVE_IOCTL_* configure checksBrian Behlendorf2014-08-281-8/+0
| | | | | | | | | | | The HAVE_IOCTL_* configure checks were originally added for compatibility with an ancient version of glibc. This support and additional complexity is no longer needed and is therefore being removed. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Turbo Fredriksson <[email protected]> Closes #585
* Avoid PAGESIZE redefinitionAlec Salazar2014-08-131-0/+2
| | | | | | | | | Add #ifndef PAGESIZE to avoid redefinition warning on platforms where this value is already provided. Signed-off-by: Alec Salazar <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2588
* Replace __va_list with va_listAlec Salazar2014-08-131-4/+0
| | | | | | | | | | Most of the code base already uses va_list, which is specified by iso-c. gcc/glibc provides 'typedef __gnuc_va_list va_list'. and when not using gcc/glibc we can't expect to find __gnuc_va_list. Signed-off-by: Alec Salazar <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2588
* Omit compiler warning by sticking to RAIIMarcel Huber2014-05-221-5/+5
| | | | | | | | | | | Resolve gcc 4.9.0 20140507 warnings about uninitialized 'ptr' when using -Wmaybe-uninitialized. The first two cases appears appear to be legitimate but not the second two. In general this is a good practice so they are all initialized. Signed-off-by: Marcel Huber <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2345
* libspl: Implement LWP rwlock interfaceRichard Yao2014-05-011-0/+51
| | | | | | | | | | | | This implements a subset of the LWP rwlock interface by wrapping the equivalent POSIX thread interface. It is a superset of the features needed by ztest. The missing bits are {,_}rw_read_held() and {,_}rw_write_held(). Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #1970
* Add support for aarch64 (ARMv8)Jorgen Lundman2014-04-251-2/+2
| | | | | | | | | | | | | | Using the ARM reference simulation (fast model foundation v8) I cross compiled spl and zfs, to confirm it works on ARMv8 (64 bit arm architecture, called aarch64 in Linux). As it is based on previous ARM porting, the resulting patch is disappointingly small, there was very little to do. The code fixes the compile issues and has light testing done. Signed-off-by: Jorgen Lundman <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2260
* Assert alignment in umem_alloc_alignedRichard Yao2014-03-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | Valgrind suggests that the address we are returning is not properly aligned, so lets add an assertion. ==87740== Address 0x1012a22a is 554 bytes inside a block of size 4,096 alloc'd ==87740== at 0x4C2BBA0: memalign (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so) ==87740== by 0x4C2BCC7: posix_memalign (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so) ==87740== by 0x52FA845: zio_buf_alloc (umem.h:101) ==87740== by 0x52F6226: zil_alloc_lwb (zil.c:463) ==87740== by 0x52F8559: zil_commit (zil.c:566) ==87740== by 0x40611D: ztest_freeze (ztest.c:5909) ==87740== by 0x4066A7: ztest_init (ztest.c:6048) ==87740== by 0x407AF4: main (ztest.c:6226) Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2174
* Define the needed ISA types for SparcBrian Behlendorf2014-01-091-1/+29
| | | | | | | | | | Add the minimum required ISA types to support the Sparc architecture. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Ned Bass <[email protected]> Signed-off-by: marku89 <[email protected]> Issue #1700
* Add full SELinux supportMatthew Thode2013-12-191-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Four new dataset properties have been added to support SELinux. They are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map directly to the context options described in mount(8). When one of these properties is set to something other than 'none'. That string will be passed verbatim as a mount option for the given context when the filesystem is mounted. For example, if you wanted the rootcontext for a filesystem to be set to 'system_u:object_r:fs_t' you would set the property as follows: $ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media This will ensure the filesystem is automatically mounted with that rootcontext. It is equivalent to manually specifying the rootcontext with the -o option like this: $ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media By default all four contexts are set to 'none'. Further information on SELinux contexts is detailed in mount(8) and selinux(8) man pages. Signed-off-by: Matthew Thode <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #1504
* cstyle: Resolve C style issuesMichael Kjorling2013-12-1859-240/+305
| | | | | | | | | | | | | | | | | | The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1821
* Handle acl flags from util-linux mount commandrenelson2013-12-182-3/+15
| | | | | | | | | | Add acl, noacl and posixacl to option_map, avoiding ENOENT error case when mount from util-linux-2.24 execs mount.zfs with any of those flags Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: renelson <[email protected]> Issue #1968
* Handle concurrent snapshot automounts failing due to EBUSY.Tim Chase2013-11-081-0/+1
| | | | | | | | | | | | | | | In the current snapshot automount implementation, it is possible for multiple mounts to attempted concurrently. Only one of the mounts will succeed and the other will fail. The failed mounts will cause an EREMOTE to be propagated back to the application. This commit works around the problem by adding a new exit status, MOUNT_BUSY to the mount.zfs program which is used when the underlying mount(2) call returns EBUSY. The zfs code detects this condition and treats it as if the mount had succeeded. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1819
* Illumos #3582, #3584Adam Leventhal2013-11-041-0/+8
| | | | | | | | | | | | | | | | | | | | 3582 zfs_delay() should support a variable resolution 3584 DTrace sdt probes for ZFS txg states Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Christopher Siden <[email protected]> Reviewed by: Dan McDonald <[email protected]> Reviewed by: Richard Elling <[email protected]> Approved by: Garrett D'Amore <[email protected]> References: https://www.illumos.org/issues/3582 illumos/illumos-gate@0689f76 Ported by: Ned Bass <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #1775
* Revert "Add txgs-<pool> kstat file"Brian Behlendorf2013-10-251-26/+1
| | | | This reverts commit e95853a331529a6cb96fdf10476c53441e59f4e1.
* Illumos #3006Madhav Suresh2013-06-191-0/+3
| | | | | | | | | | | | | | | | | | | | 3006 VERIFY[S,U,P] and ASSERT[S,U,P] frequently check if first argument is zero Reviewed by Matt Ahrens <[email protected]> Reviewed by George Wilson <[email protected]> Approved by Eric Schrock <[email protected]> References: illumos/illumos-gate@fb09f5aad449c97fe309678f3f604982b563a96f https://illumos.org/issues/3006 Requires: zfsonlinux/spl@1c6d149feb4033e4a56fb987004edc5d45288bcb Ported-by: Tim Chase <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #1509
* Don't leak mount flags into kernelNed Bass2013-06-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | When calling mount(), care must be taken to avoid passing in flags that are used only by the user space utilities. Otherwise we may stomp on flags that are reserved for other purposes in the kernel. In particular, openSUSE 12.3 kernels have added a new MS_RICHACL super-block flag whose value conflicts with our MS_COMMENT flag. This causes incorrect behavior such as the umask being ignored. The MS_COMMENT flag essentially serves as a placeholder in the option_map data structure of zfs_mount.c, but its value is never used. Therefore we can avoid the conflict by defining it to 0. The MS_USERS, MS_OWNER, and MS_GROUP flags also conflict with reserved flags in the kernel. While this is not known to have caused any problems, it is nevertheless incorrect. For the purposes of the mount.zfs helper, the "users", "owner", and "group" options just serve as hints to set additional implied options. Therefore we now define their associated mount flags in terms of the options that they imply rather than giving them unique values. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1457
* build: resolve orthographic and other grammatical errorsJan Engelhardt2013-04-021-3/+3
| | | | | Signed-off-by: Jan Engelhardt <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Remove unused machelf.h headerBrian Behlendorf2013-02-052-181/+0
| | | | | | | | | The machelf.h header is never included by anything in the zfs build process. It is all effectively dead code which can be safely removed. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1265
* Add txgs-<pool> kstat fileBrian Behlendorf2012-11-021-1/+26
| | | | | | | | | | | | | | | | | | | | Create a kstat file which contains useful statistics about the last N txgs processed. This can be helpful when analyzing pool performance. The new KSTAT_TYPE_TXG type was added for this purpose and it tracks the following statistics per-txg. txg - Unique txg number state - State (O)pen/(Q)uiescing/(S)yncing/(C)ommitted birth; - Creation time nread - Bytes read nwritten; - Bytes written reads - IOPs read writes - IOPs write open_time; - Length in nanoseconds the txg was open quiesce_time - Length in nanoseconds the txg was quiescing sync_time; - Length in nanoseconds the txg was syncing Signed-off-by: Brian Behlendorf <[email protected]>
* Add atomic_sub_* functions to libspl.Etienne Dechamps2012-10-171-0/+30
| | | | | | | | | | Both the SPL and the ZFS libspl export most of the atomic_* functions, except atomic_sub_* functions which are only exported by the SPL, not by libspl. This patch remedies that by implementing atomic_sub_* functions in libspl. Signed-off-by: Brian Behlendorf <[email protected]> Issue #1013
* Remove autotools productsBrian Behlendorf2012-08-278-5180/+0
| | | | | | | | Remove all of the generated autotools products from the repository and update the .gitignore files accordingly. Signed-off-by: Brian Behlendorf <[email protected]> Closes #718
* Set zvol discard_granularity to the volblocksize.Etienne Dechamps2012-08-078-0/+8
| | | | | | | | | | | | | | | | | | Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <[email protected]> Closes #862
* Linux 3.5 compat, end_writeback() changed to clear_inode()Richard Yao2012-07-238-0/+8
| | | | | | | | | | | | | | | | The end_writeback() function was changed by moving the call to inode_sync_wait() earlier in to evict(). This effecitvely changes the ordering of the sync but it does not impact the details of the zfs implementation. However, as part of this change end_writeback() was renamed to clear_inode() to reflect the new semantics. This change does impact us and clear_inode() now maps to end_writeback() for kernels prior to 3.5. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #784
* Linux 3.5 compat, iops->truncate_range() removedRichard Yao2012-07-238-0/+8
| | | | | | | | | The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #784
* Linux 3.5 compat, eops->encode_fh() takes inodesRichard Yao2012-07-238-0/+8
| | | | | | | | | | | | | | The export_operations member ->encode_fh() has been updated to take both the child and parent inodes. This interface used to take the child dentry and a bool describing if the parent is needed. NOTE: While updating this code I noticed that we do not currently cleanly handle the case where we're passed a connectable parent. This code should be audited to make sure we're doing the right thing. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #784
* Move partition scanning from userspace to module.Etienne Dechamps2012-07-178-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, zpool online -e (dynamic vdev expansion) doesn't work on whole disks because we're invoking ioctl(BLKRRPART) from userspace while ZFS still has a partition open on the disk, which results in EBUSY. This patch moves the BLKRRPART invocation from the zpool utility to the module. Specifically, this is done just before opening the device in vdev_disk_open() which is called inside vdev_reopen(). This requires jumping through some hoops to get to the disk device from the partition device, and to make sure we can still open the partition after the BLKRRPART call. Note that this new code path is triggered on dynamic vdev expansion only; other actions, like creating a new pool, are unchanged and still call BLKRRPART from userspace. This change also depends on API changes which are available in 2.6.37 and latter kernels. The build system has been updated to detect this, but there is no compatibility mode for older kernels. This means that online expansion will NOT be available in older kernels. However, it will still be possible to expand the vdev offline. Signed-off-by: Brian Behlendorf <[email protected]> Closes #808
* Illumos #1748: desire support for reguid in zfsGarrett D'Amore2012-07-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | Reviewed by: George Wilson <[email protected]> Reviewed by: Igor Kozhukhov <[email protected]> Reviewed by: Alexander Eremin <[email protected]> Reviewed by: Alexander Stetsenko <[email protected]> Approved by: Richard Lowe <[email protected]> References: https://www.illumos.org/issues/1748 This commit modifies the user to kernel space ioctl ABI. Extra care should be taken when updating to ensure both the kernel modules and utilities are updated. If only the user space component is updated both the 'zpool events' command and the 'zpool reguid' command will not work until the kernel modules are updated. Ported by: Martin Matuska <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #665
* Linux 3.4 compat, d_make_root() replaces d_alloc_root()Richard Yao2012-06-118-0/+8
| | | | | | | | | | | | | | | | | | | | torvalds/linux@adc0e91ab142abe93f5b0d7980ada8a7676231fe introduced introduced d_make_root() as a replacement for d_alloc_root(). Further commits appear to have removed d_alloc_root() from the Linux source tree. This causes the following failure: error: implicit declaration of function 'd_alloc_root' [-Werror=implicit-function-declaration] To correct this we update the code to use the current d_make_root() interface for readability. Then we introduce an autotools check to determine if d_make_root() is available. If it isn't then we define some compatibility logic which used the older d_alloc_root() interface. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #776
* Define the needed ISA types for ARMJorgen Lundman2012-05-031-1/+20
| | | | | | Add the minimum required ISA types to support the ARM architecture. Signed-off-by: Brian Behlendorf <[email protected]>
* Linux 3.3 compat, iops->create()/mkdir()/mknod()Brian Behlendorf2012-04-308-0/+8
| | | | | | | | | | The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <[email protected]> Closes #701
* Add --enable-debug-dmu-tx configure optionBrian Behlendorf2012-03-238-0/+8
| | | | | | | | | | | | | | | | | | Allow rigorous (and expensive) tx validation to be enabled/disabled indepentantly from the standard zfs debugging. When enabled these checks ensure that all txs are constructed properly and that a dbuf is never dirtied without taking the correct tx hold. This checking is particularly helpful when adding new dmu consumers like Lustre. However, for established consumers such as the zpl with no known outstanding tx construction problems this is just overhead. --enable-debug-dmu-tx - Enable/disable validation of each tx as --disable-debug-dmu-tx it is constructed. By default validation is disabled due to performance concerns. Signed-off-by: Brian Behlendorf <[email protected]>
* Add .zfs control directoryBrian Behlendorf2012-03-228-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <[email protected]> Contributiobs-by: Andrew Barnes <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #173
* Cleanly support debug packagesBrian Behlendorf2012-02-278-0/+8
| | | | | | | | | | | | | | | | | | | Allow a source rpm to be rebuilt with debugging enabled. This avoids the need to have to manually modify the spec file. By default debugging is still largely disabled. To enable specific debugging features use the following options with rpmbuild. '--with debug' - Enables ASSERTs # For example: $ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm Additionally, ZFS_CONFIG has been added to zfs_config.h for packages which build against these headers. This is critical to ensure both zfs and the dependant package are using the same prototype and structure definitions. Signed-off-by: Brian Behlendorf <[email protected]>
* Add support for DISCARD to ZVOLs.Etienne Dechamps2012-02-098-0/+8
| | | | | | | | | | | | | | | | | | | | DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <[email protected]>
* Support the fallocate() file operation.Etienne Dechamps2012-02-098-0/+8
| | | | | | | | | | | | | | Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is supported, since it's the only one that matches the behavior of zfs_space(). This makes it pretty much useless in its current form, but it's a start. To support other flag combinations we would need to modify zfs_space() to make it more flexible, or emulate the desired functionality in zpl_fallocate(). Signed-off-by: Brian Behlendorf <[email protected]> Issue #334
* Improve ZVOL queue behavior.Etienne Dechamps2012-02-078-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <[email protected]>
* Fix synchronicity for ZVOLs.Etienne Dechamps2012-02-078-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <[email protected]>
* Linux 3.3 compat, sops->show_options()Brian Behlendorf2012-02-038-0/+8
| | | | | | | | | | The second argument of sops->show_options() was changed from a 'struct vfsmount *' to a 'struct dentry *'. Add an autoconf check to detect the API change and then conditionally define the expected interface. In either case we are only interested in the zfs_sb_t. Signed-off-by: Brian Behlendorf <[email protected]> Closes #549
* Add overlay(-O) mount option supportSuman Chakravartula2012-01-121-0/+7
| | | | | | | | | | | | | | | | | | | Linux supports mounting over non-empty directories by default. In Solaris this is not the case and -O option is required for zfs mount to mount a zfs filesystem over a non-empty directory. For compatibility, I've added support for -O option to mount zfs filesystems over non-empty directories if the user wants to, just like in Solaris. I've defined MS_OVERLAY to record it in the flags variable if the -O option is supplied. The flags variable passes through a few functions and its checked before performing the empty directory check in zfs_mount function. If -O is given, the check is not performed. Signed-off-by: Brian Behlendorf <[email protected]> Closes #473
* Linux 3.1 compat, super_block->s_shrinkBrian Behlendorf2012-01-118-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <[email protected]> Closes #466 Closes #292
* Linux 3.2 compat: set_nlink()Darik Horn2011-12-168-0/+8
| | | | | | | | | | | Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170 Use the new set_nlink() kernel function instead. Signed-off-by: Brian Behlendorf <[email protected]> Closes: #462
* Add make rule for building Arch Linux packagesPrakash Surya2011-12-148-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #491
* Simplify BDI integrationBrian Behlendorf2011-11-088-0/+8
| | | | | | | | | | | | | | Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <[email protected]> Closes #367
* Autogen refresh for udev changesBrian Behlendorf2011-08-088-0/+24
| | | | | | | | Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
* Add backing_device_info per-filesystemBrian Behlendorf2011-08-048-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <[email protected]> Closes #174
* Provide a rc.d script for archlinuxzfs-0.6.0-rc5Kyle Fuller2011-07-118-0/+8
| | | | | | | | | | | Unlike most other Linux distributions archlinux installs its init scripts in /etc/rc.d insead of /etc/init.d. This commit provides an archlinux rc.d script for zfs and extends the build infrastructure to ensure it get's installed in the correct place. Signed-off-by: Brian Behlendorf <[email protected]> Closes #322
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 09:46:21 +0000