aboutsummaryrefslogtreecommitdiffstats
path: root/lib/libnvpair
Commit message (Collapse)AuthorAgeFilesLines
* libnvpair.c: replace strstr() with strchr() for a single characterrilysh2024-01-291-1/+1
| | | | | | | | | | Since we're looking for a single new-line character in the haystack, it's better (and slightly more efficient) to use strchr() instead of strstr(). Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Yao <[email protected]> Signed-off-by: rilysh <[email protected]> Closes #15798
* nvpair: Constify string functionsRichard Yao2023-03-143-55/+64
| | | | | | | | | | | | | | After addressing coverity complaints involving `nvpair_name()`, the compiler started complaining about dropping const. This lead to a rabbit hole where not only `nvpair_name()` needed to be constified, but also `nvpair_value_string()`, `fnvpair_value_string()` and a few other static functions, plus variable pointers throughout the code. The result became a fairly big change, so it has been split out into its own patch. Reviewed-by: Tino Reichardt <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #14612
* ABI files: sync with new Ubuntu release in CIGeorge Melikov2023-03-101-1265/+1613
| | | | | | | | | | We may try to build ZFS inside container too, but let's just sync them for now. Reviewed-by: Tino Reichardt <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Yao <[email protected]> Signed-off-by: George Melikov <[email protected]> Closes #14605
* Fix GCC 12 compilation errorsszubersk2022-11-301-0/+15
| | | | | | | | | Squelch false positives reported by GCC 12 with UBSan. Reviewed-by: Richard Yao <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: szubersk <[email protected]> Closes #14150
* Replace dead opensolaris.org license linkTino Reichardt2022-07-112-2/+2
| | | | | | | | | The commit replaces all findings of the link: http://www.opensolaris.org/os/licensing with this one: https://opensource.org/licenses/CDDL-1.0 Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tino Reichardt <[email protected]> Closes #13619
* Replace EXTRA_DIST with dist_noinst_DATABrian Behlendorf2022-05-261-1/+1
| | | | | | | | | | | | | | | The EXTRA_DIST variable is ignored when used in the FALSE conditional of a Makefile.am. This results in the `make dist` target omitting these files from the generated tarball unless CONFIG_USER is defined. This issue can be avoided by switching to use the dist_noinst_DATA variable which is handled as expected by autoconf. This change also adds support for --with-config=dist as an alias for --with-config=srpm and updates the GitHub workflows to use it. Reviewed-by: Ahelenia Ziemiańska <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #13459 Closes #13505
* autoconf: use include directives instead of recursing down libнаб2022-05-101-34/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a bonus, this also adds zfs-mount-generator (previously undescended down) and libzstd (not included) to CppCheck As a bonus bonus, abigail rules work out-of-tree, too Against current trunk: $ diff -U0 ./destdir.listing ~/store/code/zfs/destdir.listing -destdir/usr/local/include/libspl/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep -v /Makefile -zfs-2.1.99/config/Abigail.am -zfs-2.1.99/lib/libspl/include/util/ -zfs-2.1.99/lib/libspl/include/util/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep /Makefile -zfs-2.1.99/lib/libavl/Makefile.in -zfs-2.1.99/lib/libefi/Makefile.in -zfs-2.1.99/lib/libicp/Makefile.in -zfs-2.1.99/lib/libnvpair/Makefile.in -zfs-2.1.99/lib/libshare/Makefile.in -zfs-2.1.99/lib/libspl/include/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/Makefile.am -zfs-2.1.99/lib/libspl/include/os/Makefile.in -zfs-2.1.99/lib/libspl/include/rpc/Makefile.am -zfs-2.1.99/lib/libspl/include/rpc/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/util/Makefile.am -zfs-2.1.99/lib/libspl/include/util/Makefile.in -zfs-2.1.99/lib/libspl/Makefile.in -zfs-2.1.99/lib/libtpool/Makefile.in -zfs-2.1.99/lib/libunicode/Makefile.in -zfs-2.1.99/lib/libuutil/Makefile.in -zfs-2.1.99/lib/libzfsbootenv/Makefile.in -zfs-2.1.99/lib/libzfs_core/Makefile.in -zfs-2.1.99/lib/libzfs/Makefile.in -zfs-2.1.99/lib/libzpool/Makefile.in -zfs-2.1.99/lib/libzstd/Makefile.in -zfs-2.1.99/lib/libzutil/Makefile.in -zfs-2.1.99/lib/Makefile.in Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13316
* Improve zpool status output, list all affected datasetsGeorge Amanakis2022-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, determining which datasets are affected by corruption is a manual process. The primary difficulty in reporting the list of affected snapshots is that since the error was initially found, the snapshot where the error originally occurred in, may have been deleted. To solve this issue, we add the ID of the head dataset of the original snapshot which the error was detected in, to the stored error report. Then any time a filesystem is deleted, the errors associated with it are deleted as well. Any time a clone promote occurs, we modify reports associated with the original head to refer to the new head. The stored error reports are identified by this head ID, the birth time of the block which the error occurred in, as well as some information about the error itself are also stored. Once this information is stored, we can find the set of datasets affected by an error by walking back the list of snapshots in the given head until we find one with the appropriate birth txg, and then traverse through the snapshots of the clone family, terminating a branch if the block was replaced in a given snapshot. Then we report this information back to libzfs, and to the zpool status command, where it is displayed as follows: pool: test state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:00:00 with 800 errors on Fri Dec 3 08:27:57 2021 config: NAME STATE READ WRITE CKSUM test ONLINE 0 0 0 sdb ONLINE 0 0 1.58K errors: Permanent errors have been detected in the following files: test@1:/test.0.0 /test/test.0.0 /test/1clone/test.0.0 A new feature flag is introduced to mark the presence of this change, as well as promotion and backwards compatibility logic. This is an updated version of #9175. Rebase required fixing the tests, updating the ABI of libzfs, updating the man pages, fixing bugs, fixing the error returns, and updating the old on-disk error logs to the new format when activating the feature. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Mark Maybee <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Co-authored-by: TulsiJain <[email protected]> Signed-off-by: George Amanakis <[email protected]> Closes #9175 Closes #12812
* Ask libtool to stop hiding some errorsRich Ercolani2022-03-311-0/+2
| | | | | | | | | | | | | For #13083, curiously, it did not print the actual error, just that the compile failed with "Error 1". In theory, this flag should cause it to report errors twice sometimes. In practice, I'm pretty okay with reporting some twice if it avoids reporting some never. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Damian Szuberski <[email protected]> Signed-off-by: Rich Ercolani <[email protected]> Closes #13086
* Forbid b{copy,zero,cmp}(). Don't include <strings.h> for <string.h>наб2022-03-151-1/+1
| | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12996
* Remove bcopy(), bzero(), bcmp()наб2022-03-151-3/+1
| | | | | | | | | | bcopy() has a confusing argument order and is actually a move, not a copy; they're all deprecated since POSIX.1-2001 and removed in -2008, and we shim them out to mem*() on Linux anyway Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12996
* libnvpair: json: suppress wchar_t >=0 warningsнаб2022-02-181-0/+4
| | | | | | | Reviewed-by: Alejandro Colomar <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13110
* Add `--enable-asan` and `--enable-ubsan` switchesDamian Szuberski2022-02-031-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | `configure` now accepts `--enable-asan` and `--enable-ubsan` switches which results in passing `-fsanitize=address` and `-fsanitize=undefined`, respectively, to the compiler. Those flags are enabled in GitHub workflows for ZTS and zloop. Errors reported by both instrumentations are corrected, except for: - Memory leak reporting is (temporarily) suppressed. The cost of fixing them is relatively high compared to the gains. - Checksum computing functions in `module/zcommon/zfs_fletcher*` have UBSan errors suppressed. It is completely impractical to enforce 64-byte payload alignment there due to performance impact. - There's no ASan heap poisoning in `module/zstd/lib/zstd.c`. A custom memory allocator is used there rendering that measure unfeasible. - Memory leaks detection has to be suppressed for `cmd/zvol_id`. `zvol_id` is run by udev with the help of `ptrace(2)`. Tracing is incompatible with memory leaks detection. Reviewed-by: Ahelenia Ziemiańska <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: szubersk <[email protected]> Closes #12928
* module/*.ko: prune .data, global .rodataнаб2022-01-142-46/+47
| | | | | | | | | | | | Evaluated every variable that lives in .data (and globals in .rodata) in the kernel modules, and constified/eliminated/localised them appropriately. This means that all read-only data is now actually read-only data, and, if possible, at file scope. A lot of previously- global-symbols became inlinable (and inlined!) constants. Probably not in a big Wowee Performance Moment, but hey. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12899
* libnvpair: fix unused, remove argsusedнаб2021-12-232-3/+3
| | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12844
* Add `const` to nvlist functions to properly expose their real behaviorPaul Dagnelie2021-12-061-120/+147
| | | | | | | | Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Closes #12728
* Upgrade to libabigail 2.0.0Dimitri John Ledkov2021-11-091-1124/+960
| | | | | | | | | Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Dimitri John Ledkov <[email protected]> Closes #12722 Closes #12739
* Update ABI files via new libabigail versionGeorge Melikov2021-09-021-2432/+2183
| | | | | | | Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: George Melikov <[email protected]> Closes #12529
* Update ABI files with generated in CI workerGeorge Melikov2021-07-261-2604/+2159
| | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: George Melikov <[email protected]> Closes #12388
* Remove NOTE(CONSTCOND) and note.hнаб2021-07-261-5/+4
| | | | | | | | These were mostly used to annotate do {} while(0)s Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Issue #12201
* lib{efi,avl,share,tpool,zfs_core,zfsbootenv,zutil}: -fvisibility=hiddenнаб2021-06-092-1240/+1229
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No symbols affected in libavl No symbols affected by libtpool, but pre-ANSI declarations got purged No symbols affected by libzfs_core No symbols affected by libzfs_bootenv libefi got cleaned, gained efi_debug documentation in efi_partition.h, and removes one undocumented and unused symbol from libzfs_core: D default_vtoc_map libnvpair saw removal of these symbols: D nv_alloc_nosleep_def D nv_alloc_sleep D nv_alloc_sleep_def D nv_fixed_ops_def D nvlist_hashtable_init_size D nvpair_max_recursion libshare saw removal of these symbols from libzfs: T libshare_nfs_init T libshare_smb_init T register_fstype B smb_shares libzutil saw removal of these internal symbols from libzfs_core: T label_paths T slice_cache_compare T zpool_find_import_blkid T zpool_open_func T zutil_alloc T zutil_strdup Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12191
* Fix error check in nvlist_print_json_stringRyan Moeller2021-06-041-8/+7
| | | | | | | | | | | Move check for errors from mbrtowc() into the loop. The error values are not actually negative, so we don't break out of the loop when they are encountered. Reviewed-by: Tony Nguyen <[email protected]> Reviewed-by: John Kennedy <[email protected]> Signed-off-by: Ryan Moeller <[email protected]> Closes #12175 Closes #12176
* libspl: staticify buf and pagesize, rename aok to libspl_assert_okнаб2021-06-031-1985/+2828
| | | | | | | | Exporting names this short can easily cause nasty collisions with user code. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: John Kennedy <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12050
* cppcheck: integrete cppcheckBrian Behlendorf2021-01-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order for cppcheck to perform a proper analysis it needs to be aware of how the sources are compiled (source files, include paths/files, extra defines, etc). All the needed information is available from the Makefiles and can be leveraged with a generic cppcheck Makefile target. So let's add one. Additional minor changes: * Removing the cppcheck-suppressions.txt file. With cppcheck 2.3 and these changes it appears to no longer be needed. Some inline suppressions were also removed since they appear not to be needed. We can add them back if it turns out they're needed for older versions of cppcheck. * Added the ax_count_cpus m4 macro to detect at configure time how many processors are available in order to run multiple cppcheck jobs. This value is also now used as a replacement for nproc when executing the kernel interface checks. * "PHONY =" line moved in to the Rules.am file which is included at the top of all Makefile.am's. This is just convenient becase it allows us to use the += syntax to add phony targets. * One upside of this integration worth mentioning is it now allows `make cppcheck` to be run in any directory to check that subtree. * For the moment, cppcheck is not run against the FreeBSD specific kernel sources. The cppcheck-FreeBSD target will need to be implemented and testing on FreeBSD to support this. Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #11508
* Include the ABI with dist tarballBrian Behlendorf2020-11-211-0/+3
| | | | | | | The ABI should be included when generating the `make dist` tarball since it's required by the `make checkabi` target. Signed-off-by: Brian Behlendorf <[email protected]> Closes #11225
* Add ABI snapshotBrian Behlendorf2020-11-171-0/+2805
| | | | | | | | | | | | Add a snapshot of the current ABI using libabigail-1.7-2. The included ABI passes `make checkabi` for CentOS 7, Fedora 33, Debian 10, and Ubuntu 20.04. This covers a fairly wide range of glibc, gcc, and libabigail versions plus other changes which are platform specific. Reviewed-by: Antonio Russo <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #11144
* Library ABI tracking with abigailAntonio Russo2020-11-172-0/+5
| | | | | | | | | | | | | | | Provide two make targets: checkabi and storeabi. storeabi uses libabigail to generate a reference copy of the ABI for the public libraries. checkabi compares such a reference to the compiled version, failing if they are not compatible. No ABI is generated for libzpool.so, it is only used by ztest and zdb and not external consumers. Co-authored-by: Brian Behlendorf <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #11144
* Synchronize library ABI levelsAntonio Russo2020-11-031-4/+0
| | | | | | | | | | | Bump library SOVERSION under Linux to match FreeBSD's. Additionally, this bump properly accounts for the ABI changes relative to ZoL 0.8.5 for the Linux build. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Issue #11144
* Disable -Wl,-z,defs for ASAN buildsJoao Carlos Mendes Luis2020-07-141-1/+5
| | | | | | | | | | | Commit af65916 added -Wl,-z,defs for the shared libraries. This apparently does not work in some cases with --enable-asan, so only add it for non-ASAN builds. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: João Carlos Mendes Luis <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10557 Closes #10560
* Use abs_top_builddir when referencing librariesArvind Sankar2020-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | libtool stores absolute paths in the dependency_libs component of the .la files. If the Makefile for a dependent library refers to the libraries by relative path, some libraries end up duplicated on the link command line. As an example, libzfs specifies libzfs_core, libnvpair and libuutil as dependencies to be linked in. The .la file for libzfs_core also specifies libnvpair, but using an absolute path, with the result that libnvpair is present twice in the linker command line for producing libzfs. While the only thing this causes is to slightly slow down the linking, we can avoid it by using absolute paths everywhere, including for convenience libraries just for consistency. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10538
* Add -z defs to LDFLAGSArvind Sankar2020-07-101-2/+4
| | | | | | | | | This will make sure the installed libraries are linked with everything they require. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10538
* Add config.rpath for AM_GNU_GETTEXTArvind Sankar2020-07-101-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | Commit e8864b1b28c2 ("config: libintl/libiconv for gettext() detection") added an empty config.rpath with a comment that the real one doesn't work with libtool. However, an empty config.rpath doesn't really work: eg. on FreeBSD, where libintl is in /usr/local/lib, configure thinks that gettext doesn't exist and NLS should be disabled, which currently isn't supported in the source, and hence requires manual workaround to directly link -lintl without relying on configure. config.rpath is essential to let it be detected either in --prefix or using --with-libintl-prefix. I also don't see the mentioned issue with libtool flags applied to compilation, it seems to work fine to pass LTLIBINTL to libtool. It's unnecessary to include LTLIBICONV as the configure test will automatically append that to LTLIBINTL if it is necessary to link with libiconv. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10538
* Clean up lib dependenciesArvind Sankar2020-07-101-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libzutil is currently statically linked into libzfs, libzfs_core and libzpool. Avoid the unnecessary duplication by removing it from libzfs and libzpool, and adding libzfs_core to libzpool. Remove a few unnecessary dependencies: - libuutil from libzfs_core - libtirpc from libspl - keep only libcrypto in libzfs, as we don't use any functions from libssl - librt is only used for clock_gettime, however on modern systems that's in libc rather than librt. Add a configure check to see if we actually need librt - libdl from raidz_test Add a few missing dependencies: - zlib to libefi and libzfs - libuuid to zpool, and libuuid and libudev to zed - libnvpair uses assertions, so add assert.c to provide aok and libspl_assertf Sort the LDADD for programs so that libraries that satisfy dependencies come at the end rather than the beginning of the linker command line. Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY instead. This can take advantage of pkg-config, and it also avoids polluting LIBS. List all the required dependencies in the pkgconfig files, and move the one for libzfs_core into the latter's directory. Install pkgconfig files in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on FreeBSD, instead of /usr/share/pkgconfig, as the more correct location for library .pc files. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10538
* Fixes for make distArvind Sankar2020-06-261-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the usage of EXTRA_DIST. If files are conditionally included in _SOURCES, _HEADERS etc, automake is smart enough to dist all files that could possibly be included, but this does not apply to EXTRA_DIST, resulting in make dist depending on the configuration. Add some files that were missing altogether in various Makefile's. The changes to disted files in this commit (excluding deleted files): +./cmd/zed/agents/README.md +./etc/init.d/README.md +./lib/libspl/os/freebsd/getexecname.c +./lib/libspl/os/freebsd/gethostid.c +./lib/libspl/os/freebsd/getmntany.c +./lib/libspl/os/freebsd/mnttab.c -./lib/libzfs/libzfs_core.pc -./lib/libzfs/libzfs.pc +./lib/libzfs/os/freebsd/libzfs_compat.c +./lib/libzfs/os/freebsd/libzfs_fsshare.c +./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c +./lib/libzfs/os/freebsd/libzfs_zmount.c +./lib/libzutil/os/freebsd/zutil_compat.c +./lib/libzutil/os/freebsd/zutil_device_path_os.c +./lib/libzutil/os/freebsd/zutil_import_os.c +./module/lua/README.zfs +./module/os/linux/spl/README.md +./tests/README.md +./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh +./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh +./tests/zfs-tests/tests/functional/inheritance/README.config +./tests/zfs-tests/tests/functional/inheritance/README.state +./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh +./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10501
* Add FreeBSD support to OpenZFSMatthew Macy2020-04-141-0/+7
| | | | | | | | | | | | | | | | | | Add the FreeBSD platform code to the OpenZFS repository. As of this commit the source can be compiled and tested on FreeBSD 11 and 12. Subsequent commits are now required to compile on FreeBSD and Linux. Additionally, they must pass the ZFS Test Suite on FreeBSD which is being run by the CI. As of this commit 1230 tests pass on FreeBSD and there are no unexpected failures. Reviewed-by: Sean Eric Fagan <[email protected]> Reviewed-by: Jorgen Lundman <[email protected]> Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Co-authored-by: Ryan Moeller <[email protected]> Signed-off-by: Matt Macy <[email protected]> Signed-off-by: Ryan Moeller <[email protected]> Closes #898 Closes #8987
* Use correct format string when printing int8Matthew Macy2019-10-201-1/+1
| | | | | | | | Reviewed-by: Igor Kozhukhov <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matt Macy <[email protected]> Closes #9486
* OpenZFS restructuring - libsplMatthew Macy2019-10-021-4/+0
| | | | | | | | | Factor Linux specific pieces out of libspl. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Sean Eric Fagan <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matt Macy <[email protected]> Closes #9336
* config: better libtirpc detectionRafael Kitover2019-03-021-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve the autoconf code for finding libtirpc and do not assume the headers are in /usr/include/tirpc. Also remove this assumption from the `rpc/xdr.h` header in libspl and use the same `#include_next` mechanism that is used for other libspl headers. Include pkg.m4 from pkg-config in config/ for PKG_CHECK_MODULES(), the file license allows this. Include ax_save_flags.m4 and ax_restore_flags.m4 from autoconf-archive, the file licenses are compatible. Use the 2012 versions so as not rely on a more recent autoconf feature AS_VAR_COPY(), which breaks some build slaves. Add new macro library `config/find_system_library.m4` which defines the FIND_SYSTEM_LIBRARY() macro which is a convenience wrapper over using PKG_CHECK_MODULES() with a fallback to standard library locations and some sanity checks. The parameters are: ``` FIND_SYSTEM_LIBRARY(VARIABLE-PREFIX, MODULE, HEADER, HEADER-PREFIXES, LIBRARY, FUNCTIONS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) ``` `HEADER-PREFIXES` and `FUNCTIONS` are comma-separated m4 lists. For libtirpc we are using: ``` FIND_SYSTEM_LIBRARY(LIBTIRPC, [libtirpc], [rpc/xdr.h], [tirpc], [tirpc], [xdrmem_create], [], [...]) ``` The headers are first checked for without the prefixes and then with. This system works with pkg-config and falls back on checking standard header/library locations, it can be easily overridden by the user by setting the `PREFIX_CFLAGS` and `PREFIX_LIBS` variables which are automatically added to the `./configure --help` output. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Rafael Kitover <[email protected]> Closes #7422 Closes #8313
* OpenZFS 9580 - Add a hash-table on top of nvlist to speed-up operationsSerapheim Dimitropoulos2018-07-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | = Motivation While dealing with another performance issue (see 126118f) we noticed that we spend a lot of time in various places in the kernel when constructing long nvlists. The problem is that when an nvlist is created with the NV_UNIQUE_NAME set (which is the case most of the time), we do a linear search through the whole list to ensure uniqueness for every entry we add. An example of the above scenario can be seen in the following flamegraph, where more than have the time of the zfsdev_ioctl() is spent on constructing nvlists. Flamegraph: https://sdimitro.github.io/img/flame/sdimitro_snap_unmount3.svg Adding a table to speed up lookups will help situations where we just construct an nvlist (like the scenario above), in addition to regular lookups and removals. = What this patch does In this diff we've implemented a hash-table on top of the nvlist code that converts most nvlist operations from O(# number of entries) to O(1)* (the start is for amortized time as the hash-table grows and shrinks depending on the # of entries - plain lookup is strictly O(1)). = Performance Analysis To analyze the performance improvement I just used the setup from the snapshot deletion issue mentioned above in the Motivation section. Basically I created 10K filesystems with one snapshot each and then I just used the API of libZFS_Core to pass down an nvlist of all the snapshots to have them deleted. The reason I used my own driver program was to have clean performance results of what actually happens in the kernel. The flamegraphs and wall clock times mentioned below were gathered from the start to the end of the driver program's run. Between trials the testpool used was completely destroyed, the system was rebooted and the testpool was completely recreated. The reason for this dance was to get consistent results. == Results (before patch): === Sampling Flamegraphs [Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A.svg [Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2.svg [Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3.svg === Wall clock times (in seconds) ``` [Trial 4] real 5.3 user 0.4 sys 2.3 [Trial 5] real 8.2 user 0.4 sys 2.4 [Trial 6] real 6.0 user 0.5 sys 2.3 ``` == Results (after patch): === Sampling Flamegraphs [Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-Ae.svg [Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2e.svg [Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3e.svg === Wall clock times (in seconds) ``` [Trial 4] real 4.9 user 0.0 sys 0.9 [Trial 5] real 3.8 user 0.0 sys 0.9 [Trial 6] real 3.6 user 0.0 sys 0.9 ``` == Analysis The results between the trials are consistent so in this sections I will only talk about the flamegraph results from trial-1 and the wall-clock results from trial-4. From trial-1 we can see that zfs_dev_ioctl() goes from 2,331 to 996 samples counts. Specifically, the samples from fnvlist_add_nvlist() and spa_history_log_nvl() are almost gone (~500 & ~800 to 5 & 5 samples), leaving zfs_ioc_destroy_snaps() to dominate most samples from zfs_dev_ioctl(). From trial-4 we see that the user time dropped to 0 secods. I believe the consistent 0.4 seconds before my patch was applied was due to my driver program constructing the long nvlist of snapshots so it can pass it to the kernel. As for the system time, the effect there is more clear (2.3 down to 0.9 seconds). Porting Notes: * DATA_TYPE_DONTCARE case added to switch in fm_nvprintr() and zpool_do_events_nvprint(). Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Sebastien Roy <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/9580 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b5eca7b1 Closes #7748
* Update build system and packagingBrian Behlendorf2018-05-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Pavel Zakharov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> TEST_ZIMPORT_SKIP="yes" Closes #7556
* Add JSON output support to channel programsAlek P2018-03-192-0/+404
| | | | | | | | | | | | | | | | | | | The changes piggyback JSON output support on top of channel programs (#6558). This way the JSON output support is targeted to scripting use cases and is easily maintainable since it really only touches one function (zfs_do_channel_program()). This patch ports Joyent's JSON nvlist library from illumos to enable easy JSON printing of channel program output nvlist. To keep the delta small I also took advantage of the fact that printing in zfs_do_channel_program() was almost always done before exiting the program. Reviewed by: Matt Ahrens <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alek Pinchuk <[email protected]> Closes #7281
* Support -fsanitize=address with --enable-asanBrian Behlendorf2018-01-101-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When --enable-asan is provided to configure then build all user space components with fsanitize=address. For kernel support use the Linux KASAN feature instead. https://github.com/google/sanitizers/wiki/AddressSanitizer When using gcc version 4.8 any test case which intentionally generates a core dump will fail when using --enable-asan. The default behavior is to disable core dumps and only newer versions allow this behavior to be controled at run time with the ASAN_OPTIONS environment variable. Additionally, this patch includes some build system cleanup. * Rules.am updated to set the minimum AM_CFLAGS, AM_CPPFLAGS, and AM_LDFLAGS. Any additional flags should be added on a per-Makefile basic. The --enable-debug and --enable-asan options apply to all user space binaries and libraries. * Compiler checks consolidated in always-compiler-options.m4 and renamed for consistency. * -fstack-check compiler flag was removed, this functionality is provided by asan when configured with --enable-asan. * Split DEBUG_CFLAGS in to DEBUG_CFLAGS, DEBUG_CPPFLAGS, and DEBUG_LDFLAGS. * Moved default kernel build flags in to module/Makefile.in and split in to ZFS_MODULE_CFLAGS and ZFS_MODULE_CPPFLAGS. These flags are set with the standard ccflags-y kbuild mechanism. * -Wframe-larger-than checks applied only to binaries or libraries which include source files which are built in both user space and kernel space. This restriction is relaxed for user space only utilities. * -Wno-unused-but-set-variable applied only to libzfs and libzpool. The remaining warnings are the result of an ASSERT using a variable when is always declared. * -D_POSIX_PTHREAD_SEMANTICS and -D__EXTENSIONS__ dropped because they are Solaris specific and thus not needed. * Ensure $GDB is defined as gdb by default in zloop.sh. Signed-off-by: DHE <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7027
* OpenZFS 6447 - handful of nvpair cleanupsSteve Dougherty2017-08-301-3/+5
| | | | | | | | | | | | | | | | Authored by: Steve Dougherty <[email protected]> Reviewed by: Josef 'Jeff' Sipek <[email protected]> Reviewed by: Andy Stormont <[email protected]> Reviewed by: Garrett D'Amore <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Don Brady <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/6447 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/759e89b Closes #6581
* Add libtpool (thread pools)Brian Behlendorf2017-08-091-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6442
* codebase style improvements for OpenZFS 6459 portGeorge Melikov2017-01-221-1/+2
|
* Add support for libtirpcBrian Behlendorf2016-04-282-3/+4
| | | | | | | | | | | | | | | | | | | | | While OpenSolaris libc and glibc both include XDR support, the musl libc does not in favor of depending on the BSD-licensed libtirpc library. Adding support is a simple matter of detecting the library, including the headers and linking against it. By default libtirpc will be checked for and if available used. Otherwise, configure will fall back to using the xdr implementation provided by libc if available. The options --with-tirpc/--without-tirpc can be used to disable this checking. In addition, the xdr_control() function has been simplied to only handle ZFSs specific use case. Original-patch-by: stf <[email protected]> Original-patch-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Signed-off-by: Carlo Landmeter <[email protected]> Closes #2254 Closes #4559
* Support parallel build trees (VPATH builds)Turbo Fredriksson2015-07-171-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #1082
* Illumos #2619 and #2747Christopher Siden2013-01-082-1/+7
| | | | | | | | | | | | | | | | | | | | | | 2619 asynchronous destruction of ZFS file systems 2747 SPA versioning with zfs feature flags Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Richard Lowe <[email protected]> Reviewed by: Dan Kruchinin <[email protected]> Approved by: Eric Schrock <[email protected]> References: illumos/illumos-gate@53089ab7c84db6fb76c16ca50076c147cda11757 illumos/illumos-gate@ad135b5d644628e791c3188a6ecbd9c257961ef8 illumos changeset: 13700:2889e2596bd6 https://www.illumos.org/issues/2619 https://www.illumos.org/issues/2747 NOTE: The grub specific changes were not ported. This change must be made to the Linux grub packages. Ported-by: Brian Behlendorf <[email protected]>
* Remove autotools productsBrian Behlendorf2012-08-271-722/+0
| | | | | | | | Remove all of the generated autotools products from the repository and update the .gitignore files accordingly. Signed-off-by: Brian Behlendorf <[email protected]> Closes #718
* Set zvol discard_granularity to the volblocksize.Etienne Dechamps2012-08-071-0/+1
| | | | | | | | | | | | | | | | | | Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <[email protected]> Closes #862
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 03:50:52 +0000