summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* OpenZFS 7578 - Fix/improve some aspects of ZIL writingGiuseppe Di Natale2017-06-094-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - After some ZIL changes 6 years ago zil_slog_limit got partially broken due to zl_itx_list_sz not updated when async itx'es upgraded to sync. Actually because of other changes about that time zl_itx_list_sz is not really required to implement the functionality, so this patch removes some unneeded broken code and variables. - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by single heavy logger, that increased latency for other (more latency critical) loggers, by pushing heavy log out into the main pool instead of SLOG. Beside huge latency increase for heavy writers, this implementation caused double write of all data, since the log records were explicitly prepared for SLOG. Since we now have I/O scheduler, I've found it can be much more efficient to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG. - Existing ZIL implementation had problem with space efficiency when it has to write large chunks of data into log blocks of limited size. In some cases efficiency stopped to almost as low as 50%. In case of ZIL stored on spinning rust, that also reduced log write speed in half, since head had to uselessly fly over allocated but not written areas. This change improves the situation by offloading problematic operations from z*_log_write() to zil_lwb_commit(), which knows real situation of log blocks allocation and can split large requests into pieces much more efficiently. Also as side effect it removes one of two data copy operations done by ZIL code WR_COPIED case. - While there, untangle and unify code of z*_log_write() functions. Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing block boundary, that may also improve efficiency if ZPL is made to do that. Sponsored by: iXsystems, Inc. Authored by: Alexander Motin <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Andriy Gapon <[email protected]> Reviewed by: Steven Hartland <[email protected]> Reviewed by: Brad Lewis <[email protected]> Reviewed by: Richard Elling <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Yao <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7578 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac Closes #6191
* OpenZFS 8155 - simplify dmu_write_policy handling of pre-compressed buffersMatthew Ahrens2017-06-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Authored by: Matthew Ahrens <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: George Wilson <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> When writing pre-compressed buffers, arc_write() requires that the compression algorithm used to compress the buffer matches the compression algorithm requested by the zio_prop_t, which is set by dmu_write_policy(). This makes dmu_write_policy() and its callers a bit more complicated. We simplify this by making arc_write() trust the caller to supply the type of pre-compressed buffer that it wants to write, and override the compression setting in the zio_prop_t. OpenZFS-issue: https://www.illumos.org/issues/8155 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b55ff58 Closes #6200
* Linux 4.12 compat: fix super_setup_bdi_name() callLOLi2017-05-251-4/+5
| | | | | | | | | | Provide a format parameter to super_setup_bdi_name() so we don't create duplicate names in '/devices/virtual/bdi' sysfs namespace which would prevent us from mounting more than one ZFS filesystem at a time. Reviewed-by: Chunwei Chen <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #6147
* Implemented zpool sync commandAlek P2017-05-193-0/+8
| | | | | | | | | | | This addition will enable us to sync an open TXG to the main pool on demand. The functionality is similar to 'sync(2)' but 'zpool sync' will return when data has hit the main storage instead of potentially just the ZIL as is the case with the 'sync(2)' cmd. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Alek Pinchuk <[email protected]> Closes #6122
* Force fault a vdev with 'zpool offline -f'Tony Hutter2017-05-192-2/+4
| | | | | | | | | | | | | This patch adds a '-f' option to 'zpool offline' to fault a vdev instead of bringing it offline. Unlike the OFFLINE state, the FAULTED state will trigger the FMA code, allowing for things like autoreplace and triggering the slot fault LED. The -f faults persist across imports, unless they were set with the temporary (-t) flag. Both persistent and temporary faults can be cleared with zpool clear. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #6094
* Fix large dnode send stream flag conflictBrian Behlendorf2017-05-181-1/+2
| | | | | | | | | | | | | | | | | | Bit 21 of the send stream flags was inadvertently used for two different features under concurrent development. To avoid any future compatibility problems the large dnode flag is being switched to bit 23 which is unused. The large dnode feature has only been present in pre-releases of ZoL and dnodesize defaults to legacy which is compatible with existing OpenZFS implementations. Users with dnodesize=auto needing to use zfs send/recv must update ZoL on both the source and destination systems. Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Ned Bass <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6139
* Skip spurious resilver IO on raidz vdevIsaac Huang2017-05-122-0/+3
| | | | | | | | | | | | | | | | On a raidz vdev, a block that does not span all child vdevs, excluding its skip sectors if any, may not be affected by a child vdev outage or failure. In such cases, the block does not need to be resilvered. However, current resilver algorithm simply resilvers all blocks on a degraded raidz vdev. Such spurious IO is not only wasteful, but also adds the risk of overwriting good data. This patch eliminates such spurious IOs. Reviewed-by: Gvozden Neskovic <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Isaac Huang <[email protected]> Closes #5316
* OpenZFS 8063 - verify that we do not attempt to access inactive txgMatthew Ahrens2017-05-102-3/+15
| | | | | | | | | | | | | | | | | | | | | Authored by: Matthew Ahrens <[email protected]> Reviewed by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> A standard practice in ZFS is to keep track of "per-txg" state. Any of the 3 active TXG's (open, quiescing, syncing) can have different values for this state. We should assert that we do not attempt to modify other (inactive) TXG's. Porting Notes: - ASSERTV added to txg_sync_waiting() for unused variable. OpenZFS-issue: https://www.illumos.org/issues/8063 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/01acb46 Closes #6109
* Linux 4.12 compat: CURRENT_TIME removedBrian Behlendorf2017-05-101-0/+11
| | | | | | | | Linux 4.9 added current_time() as the preferred interface to get the filesystem time. CURRENT_TIME was retired in Linux 4.12. Reviewed-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6114
* Add property overriding (-o|-x) to 'zfs receive'LOLi2017-05-091-0/+3
| | | | | | | | | | | | | | | | | | | | This allows users to specify "-o property=value" to override and "-x property" to exclude properties when receiving a zfs send stream. Both native and user properties can be specified. This is useful when using zfs send/receive for periodic backup/replication because it lets users change properties such as canmount, mountpoint, or compression without modifying the source. References: https://www.illumos.org/issues/2745 https://www.illumos.org/issues/3753 Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Alek Pinchuk <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #1350 Closes #5349
* Make createtxg and guid properties publicChristian Schwarz2017-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document the existence of `createtxg` and `guid` native properties in man pages and zfs command output. One of the great features of ZFS is incremental replication of snapshots, possibly between pools on different machines. Shell scripts are commonly used to auomate this procedure. They have to find the most recent common snapshot between both sides and then perform incremental send & recv. Currently, scripts rely on the sorting order of `zfs list`, which defaults to `createtxg`, and the assumption that snapshot names on either side do not change. By making `createtxg` and `guid` part of the public ZFS interface, scripts are enabled to use a) `createtxg` to determine the logical & temporal order of snapshots (the creation property is not an equivalent substitute since multiple snapshots may be created within one second) b) `guid` to uniquely identify a snapshot, independent of its current display name This has the potential of making scripts safer and correct. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: DHE <[email protected]> Reviewed-by: Richard Laager <[email protected]> Signed-off-by: Christian Schwarz <[email protected]> Closes #6102
* Linux 4.12 compat: PF_FSTRANS was removedChunwei Chen2017-05-091-1/+1
| | | | | | | | zfsonlinux/spl@8f87971 added __spl_pf_fstrans_check for the xfs related check, so we use them accordingly. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #6113
* Add missing *_destroy/*_fini callsGvozden Neskovic2017-05-041-0/+1
| | | | | | | | | The proposed debugging enhancements in zfsonlinux/spl#587 identified the following missing *_destroy/*_fini calls. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Gvozden Neskovic <[email protected]> Closes #5428
* Enable Linux read-ahead for a single page on ZVOLsRichard Yao2017-05-041-0/+11
| | | | | | | | | | | | | | | | | | | | Linux has read-ahead logic designed to accelerate sequential workloads. ZFS has its own read-ahead logic called zprefetch that operates on both ZVOLs and datasets. Having two prefetchers active at the same time can cause overprefetching, which unnecessarily reduces IOPS performance on CoW filesystems like ZFS. Testing shows that entirely disabling the Linux prefetch results in a significant performance penalty for reads while commensurate benefits are seen in random writes. It appears that read-ahead benefits are inversely proportional to random write benefits, and so a single page of Linux-layer read-ahead appears to offer the middle ground for both workloads. Reviewed-by: Chunwei Chen <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Issue #5902
* More ashift improvementsLOLi2017-05-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit allow higher ashift values (up to 16) in 'zpool create' The ashift value was previously limited to 13 (8K block) in b41c990 because the limited number of uberblocks we could fit in the statically sized (128K) vdev label ring buffer could prevent the ability the safely roll back a pool to recover it. Since b02fe35 the largest uberblock size we support is 8K: this allow us to store a minimum number of 16 uberblocks in the vdev label, even with higher ashift values. Additionally change 'ashift' pool property behaviour: if set it will be used as the default hint value in subsequent vdev operations ('zpool add', 'attach' and 'replace'). A custom ashift value can still be specified from the command line, if desired. Finally, fix a bug in add-o_ashift.ksh caused by a missing variable. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #2024 Closes #4205 Closes #4740 Closes #5763
* Write label 2,3 uberblocks when vdev expandsOlaf Faaland2017-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | When vdev_psize increases, the location of labels 2 and 3 changes because their location is relative to the end of the device. The configs for labels 2 and 3 are written during the next spa_sync() because the vdev is added to the dirty config list. However, the uberblock rings are not re-written in their new location, leaving the device vulnerable to the beginning of the device being overwritten or damaged. This patch copies the uberblock ring from label 0 to labels 2 and 3, in their new locations, at the next sync after vdev_psize increases. Also, add a test zpool_expand_004_pos.ksh to confirm the uberblocks are copied. Reviewed-by: BearBabyLiu <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #5108
* Add zfs_nicebytes() to print human-readable sizesLOLi2017-05-021-2/+4
| | | | | | | | | | | | | | | | * Add zfs_nicebytes() to print human-readable sizes Some 'zfs', 'zpool' and 'zdb' output strings can be confusing to the user when no units are specified. This add a new zfs_nicenum_format "ZFS_NICENUM_BYTES" used to print bytes in their human-readable form. Additionally, update some test cases to use machine-parsable 'zfs get'. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #2414 Closes #3185 Closes #3594 Closes #6032
* Linux 4.12 compat: super_setup_bdi_name()Brian Behlendorf2017-05-022-10/+78
| | | | | | | | | | All filesystems were converted to dynamically allocated BDIs. The destruction of backing_dev_info structures is handled as part of super block destruction. Refactor the code to abstract away the details of creating and destroying a BDI. Reviewed-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6089
* Reinstate zvol_taskq to fix aio on zvolChunwei Chen2017-04-261-2/+9
| | | | | | | | | | | | | | | | | | | | | | | Commit 37f9dac removed the zvol_taskq for processing zvol requests. This was removed as part of switching to make_request_fn and was motivated by a concern at the time over dispatch latency. However, this also made all bio request synchronous, and caused serious performance issues as the bio submitter would wait for every bio it submitted, effectively making the IO depth 1. This patch reinstate zvol_taskq, and to make sure overlapped I/Os are ordered properly, we take range lock in zvol_request, and pass it along with bio to the I/O functions zvol_{write,discard,read}. In order to facilitate benchmarks a zvol_request_sync module option was added to switch between sync and async request handling. For the moment, the default behavior is synchronous but this is likely to change pending additional testing. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #5824
* Prebaked scripts for zpool status/iostat -cTony Hutter2017-04-211-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the "zpool status/iostat -c" commands to only run "pre-baked" scripts from the /etc/zfs/zpool.d directory (or wherever you install to). The scripts can only be run from -c as an unprivileged user (unless the ZPOOL_SCRIPTS_AS_ROOT environment var is set by root). This was done to encourage scripts to be written is such a way that normal users can use them, and to be cautious. If your script needs to run a privileged command, consider adding the appropriate line in /etc/sudoers. See zpool(8) for an example of how to do this. The patch also allows the scripts to output custom column names. If the script outputs a line like: name=value then "name" is used for the column name, and "value" is its value. Multiple columns can be specified by outputting multiple lines. Column names and values can have spaces. If the value is empty, a dash (-) is printed instead. After all the "name=value" lines are read (if any), zpool will take the next the next line of output (if any) and print it without a column header. After that, no more lines will be processed. This can be useful for printing errors. Lastly, this patch also disables the -c option with the latency and request size histograms, since it produced awkward output and made the code harder to maintain. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #5852
* OpenZFS 5120 - zfs should allow large block/gzip/raidz boot pool (loader ↵Brian Behlendorf2017-04-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | project) Authored by: Toomas Soome <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Yuri Pankov <[email protected]> Reviewed by: Andrew Stormont <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Don Brady <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Porting Notes: - grub-2.02-beta2-422-gcad5cc0 includes support for large blocks. - Commit 8aab121 allowed GZIP[1-9]. - Grub allows pools with multiple top-level vdevs. OpenZFS-issue: https://www.illumos.org/issues/5120 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c8811bd Closes #6007
* OpenZFS 6865 - want zfs-tests cases for zpool labelclear commandYuri Pankov2017-04-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Yuri Pankov <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: loli10K <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Porting Notes: - Updated 'zpool labelclear' and 'zdb -l' such that they attempt to find a vdev given solely its short name. This behavior is consistent with the upstream OpenZFS code and the test cases depend on it. The actual implementation differs slightly due to device naming conventions on Linux. - auto_online_001_pos, auto_replace_001_pos and add-o_ashift test cases updated to expect failure when no label exists. - read_efi_label() and zpool_label_disk_check() are read-only operations and should use O_RDONLY at open time to enforce this. - zpool_label_disk() and zpool_relabel_disk() write the partition information using O_DIRECT an fsync() and page cache invalidation to ensure a consistent view of the device. - dump_label() in zdb should invalidate the page cache in order to get the authoritative label from disk. OpenZFS-issue: https://www.illumos.org/issues/6865 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95076c Closes #5981
* OpenZFS 2932 - support crash dumps to raidz, etc. poolsGiuseppe Di Natale2017-04-101-0/+2
| | | | | | | | | | | | | | | Authored by: Bill Pijewski <[email protected]> Reviewed by: Jerry Jelinek <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Dan McDonald <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/2932 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/810e43b Closes #5984 Closes #5216
* OpenZFS 8023 - Panic destroying a metaslab deferred range treeGeorge Wilson2017-04-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Authored by: George Wilson <[email protected]> Approved by: Dan McDonald <[email protected]> Reviewed by: Brad Lewis <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Saso Kiselkov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> We don't want to dirty any data when we're in the final txgs of the pool export logic. This change introduces checks to make sure that no data is dirtied after a certain point. It also addresses the culprit of this specific bug – the space map cannot be upgraded when we're in final stages of pool export. If we encounter a space map that wants to be upgraded in this phase, then we simply ignore the request as it will get retried the next time we set the fragmentation metric on that metaslab. OpenZFS-issue: https://www.illumos.org/issues/8023 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ef00f5 Closes #5991
* OpenZFS 7404 - rootpool_007_neg, bootfs_006_pos and bootfs_008_neg tests ↵Toomas Soome2017-04-071-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | fail with the loader project bits Authored by: Toomas Soome <[email protected]> Reviewed by: Igor Kozhukhov <[email protected]> Reviewed by: Marcel Telka <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Richard Lowe <[email protected]> Reviewed-by: George Melikov <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Porting Notes: - Removed gzip and zle compression restriction on bootfs datasets. Grub added support for these long ago. Ay version of grub which understands lz4 also supports this. - Enabled rootpool tests in runfile but skipped by default in setup on Linux since they modify the rootpool. - bootfs_006_pos.ksh, striped pools are allowed as bootfs. OpenZFS-issue: https://www.illumos.org/issues/7404 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a424c Closes #5982
* Additional Information for ZedletsN Clark2017-04-031-0/+1
| | | | | | | | | | | | | | | * Add ZPOOL pool state to zfs_post_common to allow differentiation between export and destroy by zedlets. * Add pool name as standard export This ensures pool name is exported to zedlets. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Don Brady <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Nathaniel Clark <[email protected]> Closes #5942
* Remove dependency on linear ABDGvozden Neskovic2017-03-292-4/+4
| | | | | | | | | | | | | | | Wherever possible it's best to avoid depending on a linear ABD. Update the code accordingly in the following areas. - vdev_raidz - zio, zio_checksum - zfs_fm - change abd_alloc_for_io() to use abd_alloc() Reviewed-by: David Quigley <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Gvozden Neskovic <[email protected]> Closes #5668
* Check ashift validity in 'zpool add'LOLi2017-03-282-1/+13
| | | | | | | | | | | | | df83110 added the ability to specify a custom "ashift" value from the command line in 'zpool add' and 'zpool attach'. This commit adds additional checks to the provided ashift to prevent invalid values from being used, which could result in disastrous consequences for the whole pool. Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #5878
* OpenZFS 7968 - multi-threaded spa_sync()Matthew Ahrens2017-03-206-12/+16
| | | | | | | | | | | | | | | | | | | | | | | Reviewed by: Pavel Zakharov <[email protected]> Reviewed by: Brad Lewis <[email protected]> Reviewed by: Saso Kiselkov <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Ported-by: Matthew Ahrens <[email protected]> spa_sync() iterates over all the dirty dnodes and processes each of them by calling dnode_sync(). If there are many dirty dnodes (e.g. because we created or removed a lot of files), the single thread of spa_sync() calling dnode_sync() can become a bottleneck. Additionally, if many dnodes are dirtied concurrently in open context (e.g. due to concurrent file creation), the os_lock will experience lock contention via dnode_setdirty(). The solution is to track dirty dnodes on a multilist_t, and for spa_sync() to use separate threads to process each of the sublists in the multilist. OpenZFS-issue: https://www.illumos.org/issues/7968 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4a2a54c Closes #5752
* Linux 4.11 compat: iops.getattr and friendsOlaf Faaland2017-03-201-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In torvalds/linux@a528d35, there are changes to the getattr family of functions, struct kstat, and the interface of inode_operations .getattr. The inode_operations .getattr and simple_getattr() interface changed to: int (*getattr) (const struct path *, struct dentry *, struct kstat *, u32 request_mask, unsigned int query_flags) The request_mask argument indicates which field(s) the caller intends to use. Fields the caller has not specified via request_mask may be set in the returned struct anyway, but their values may be approximate. The query_flags argument indicates whether the filesystem must update the attributes from the backing store. Currently both fields are ignored. It is possible that getattr-related functions within zfs could be optimized based on the request_mask. struct kstat includes new fields: u32 result_mask; /* What fields the user got */ u64 attributes; /* See STATX_ATTR_* flags */ struct timespec btime; /* File creation time */ Fields attribute and btime are cleared; the result_mask reflects this. These appear to be optional based on simple_getattr() and vfs_getattr() within the kernel, which take the same approach. Reviewed-by: Chunwei Chen <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #5875
* Restructure mount option handlingBrian Behlendorf2017-03-101-26/+34
| | | | | | | | | | | | | | | | | | | | | | Restructure the handling of mount options to be consistent with upstream OpenZFS. This required making the following changes. - The zfs_mntopts_t was renamed vfs_t and adjusted to provide the minimal needed functionality. This includes a pointer back to the associated zfsvfs_t. Plus it made it possible to revert zfs_register_callbacks() and zfsvfs_create() back to their original prototypes. - A zfs_mnt_t structure was added for the sole purpose of providing a structure to pass the osname and raw mount pointer to zfs_domount() without having to copy them. - Mount option parsing was moved down from the zpl_* wrapper functions in to the zfs_* functions. This allowed for the code to be simplied and it's where similar functionality appears on other platforms. Signed-off-by: Brian Behlendorf <[email protected]>
* Rename zfs_* functionsBrian Behlendorf2017-03-102-16/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Several functions were renamed when ZFS was originally ported to Linux. Revert the code to the original names to minimize the delta with upstream OpenZFS. zfs_sb_teardown -> zfsvfs_teardown zfs_sb_create -> zfsvfs_create zfs_sb_setup -> zfsvfs_setup zfs_sb_free -> zfsvfs_free get_zfs_sb -> getzfsvfs zfs_sb_hold -> zfsvfs_hold zfs_sb_rele -> zfsvfs_rele zfs_sb_prune_aliases -> zfs_prune_aliases (Linux-only) zfs_sb_prune -> zfs_prune (Linux only) Align the zfs_vnops.h and zfs_vfsops.h with upstream as much as possible. Several prototypes were removed and those that remain were reordered. Move the EXPORT_SYMBOL lines to the end of the source files for consistency with the other source files. Signed-off-by: Brian Behlendorf <[email protected]>
* Rename zfs_sb_t -> zfsvfs_tBrian Behlendorf2017-03-107-52/+51
| | | | | | | | | | | The use of zfs_sb_t instead of zfsvfs_t results in unnecessary conflicts with the upstream source. Change all instances of zfs_sb_t to zfsvfs_t including updating the variables names. Whenever possible the code was updated to be consistent with hope it appears in the upstream OpenZFS source. Signed-off-by: Brian Behlendorf <[email protected]>
* Fix nfs snapdir automountChunwei Chen2017-03-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The current implementation for allowing nfs to access snapdir is very buggy. It uses a special fh for snapdirs, such that the next time nfsd does fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd never knows it cross a mountpoint. The problem is that nfsd will not hold a reference on the vfsmount of the snapshot. This cause auto unmounter to unmount the snapshot even though nfs is still holding dentries in it. To fix this, we return the inode for the snapdirs themselves. However, we also trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate and see the mountpoint and do crossmnt. Because nfsd will now be aware that these are different filesystems users must add crossmnt to their export options to access snapshot directories. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #3794 Closes #4716 Closes #5810 Closes #5833
* Fix harmless "BARRIER is deprecated" kernel warning on Centos 6.8Tony Hutter2017-03-081-9/+6
| | | | | | | | | | | | | | A one time warning after module load that "BARRIER is deprecated" was seen on the heavily patched 2.6.32-642.13.1.el6.x86_64 Centos 6.8 kernel. It seems that kernel had both the old BARRIER and the newer FLUSH/FUA interfaces defined. This fixes the warning by prefering the newer FLUSH/FUA interface if it's available. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #5739 Closes #5828
* Fix multi-line error messages in blkdev_compat.hbunder20152017-03-071-9/+4
| | | | | | | | | | Fix multi-line error messages in blkdev_compat.h by changing error-generating multi-line error messages to single line errors. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: bunder2015 <[email protected]> Closes #5860
* OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_spaceBrian Behlendorf2017-03-0710-61/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewed by: Steve Gonczi <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Background information: This assertion about tx_space_* verifies that we are not dirtying more stuff than we thought we would. We “need” to know how much we will dirty so that we can check if we should fail this transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() — typically less than a millisecond), we call dbuf_dirty() on the exact blocks that will be modified. Once this happens, the temporary accounting in tx_space_* is unnecessary, because we know exactly what blocks are newly dirtied; we call dnode_willuse_space() to track this more exact accounting. The fundamental problem causing this bug is that dmu_tx_hold_*() relies on the current state in the DMU (e.g. dn_nlevels) to predict how much will be dirtied by this transaction, but this state can change before we actually perform the transaction (i.e. call dbuf_dirty()). This bug will be fixed by removing the assertion that the tx_space_* accounting is perfectly accurate (i.e. we never dirty more than was predicted by dmu_tx_hold_*()). By removing the requirement that this accounting be perfectly accurate, we can also vastly simplify it, e.g. removing most of the logic in dmu_tx_count_*(). The new tx space accounting will be very approximate, and may be more or less than what is actually dirtied. It will still be used to determine if this transaction will put us over quota. Transactions that are marked by dmu_tx_mark_netfree() will be excepted from this check. We won’t make an attempt to determine how much space will be freed by the transaction — this was rarely accurate enough to determine if a transaction should be permitted when we are over quota, which is why dmu_tx_mark_netfree() was introduced in 2014. We also won’t attempt to give “credit” when overwriting existing blocks, if those blocks may be freed. This allows us to remove the do_free_accounting logic in dbuf_dirty(), and associated routines. This logic attempted to predict what will be on disk when this txg syncs, to know if the overwritten block will be freed (i.e. exists, and has no snapshots). OpenZFS-issue: https://www.illumos.org/issues/7793 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a Upstream bugs: DLPX-32883a Closes #5804 Porting notes: - DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(), Using the default dnode size would be slightly better. - DEBUG_DMU_TX wrappers and configure option removed. - Resolved _by_dnode() conflicts these changes have not yet been applied to OpenZFS.
* Linux 4.11 compat: avoid refcount_t name conflictOlaf Faaland2017-02-281-3/+14
| | | | | | | | | | | | | | | | Linux 4.11 introduces a new type, refcount_t, which conflicts with the type of the same name defined within ZFS. Rename the ZFS type zfs_refcount_t. Within the ZFS code, use a macro to cause references to refcount_t to be changed to zfs_refcount_t at compile time. This reduces conflicts when later landing OpenZFS patches. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #5823 Closes #5842
* Clean up by-dnode code in dmu_tx.cMatthew Ahrens2017-02-241-1/+1
| | | | | | | | | | | | | | | https://github.com/zfsonlinux/zfs/commit/0eef1bde31d67091d3deed23fe2394f5a8bf2276 introduced some changes which we slightly improved the style of when porting to illumos. There is also one minor error-handling fix, in zap_add() the "zap" may become NULL in case of an error re-opening the ZAP. Originally suggested at: https://github.com/openzfs/openzfs/pull/276 Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #5805
* OpenZFS 7199 - dsl_dataset_rollback_sync may try to free already free blocksAndriy Gapon2017-02-241-0/+1
| | | | | | | | | | | | | | 7200 no blocks must be born in a txg after a snaphot is created Authored by: Andriy Gapon <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Brad Lewis <[email protected]> Approved by: Gordon Ross <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7199 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bfaed0b Closes #5817
* zfs_arc_num_sublists_per_state should be common to all multilistsMatthew Ahrens2017-02-152-4/+2
| | | | | | | | | | | | | The global tunable zfs_arc_num_sublists_per_state is used by the ARC and the dbuf cache, and other users are planned. We should change this tunable to be common to all multilists. This tuning may be overridden on a per-multilist basis. Reviewed-by: Pavel Zakharov <[email protected]> Reviewed-by: Dan Kimmel <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #5764
* OpenZFS 7104 - increase indirect block sizeMatthew Ahrens2017-02-091-1/+6
| | | | | | | | | | | | | | Authored by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Dan McDonald <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7104 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4b5c8e9 Closes #5679
* OpenZFS 4521 - zfstest is trying to execute evil "zfs unmount -a"Giuseppe Di Natale2017-02-031-1/+3
| | | | | | | | | | | | | | | | | | Authored by: Yuri Pankov <[email protected]> Reviewed by: Andriy Gapon <[email protected]> Reviewed by: Dan McDonald <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> Porting Notes: - Correctly set __ZFS_POOL_RESTRICT in inherit_001_pos OpenZFS-issue: https://www.illumos.org/issues/4521 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8808ac5 Closes #5674
* OpenZFS 1300 - filename normalization doesn't work for removesGeorge Melikov2017-02-022-28/+13
| | | | | | | | | | | | | | | Authored by: Kevin Crowe <[email protected]> Reviewed by: Yuri Pankov <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/1300 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8f1750d Closes #5725 Porting notes: - zap_micro.c: all `MT_EXACT` are replaced by `0`
* Use fletcher_4 routines natively with `abd_iterate_func()`David Quigley2017-02-011-0/+27
| | | | | | | | | | | | This patch adds the necessary infrastructure for ABD to make use of the vectorized fletcher 4 routines. - export ABD compatible interface from fletcher_4 - add ABD fletcher_4 tests for data and metadata ABD types. Reviewed-by: Brian Behlendorf <[email protected]> Original-patch-by: Gvozden Neskovic <[email protected]> Signed-off-by: David Quigley <[email protected]> Closes #5589
* OpenZFS 6569 - large file delete can starve out write opsGeorge Melikov2017-01-312-0/+32
| | | | | | | | | | | | | Authored by: Alek Pinchuk <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Sanjay Nadkarni <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> Tested-by: kernelOfTruth <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/6569 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1bf4b6f2 Closes #5706
* OpenZFS 7280 - Allow changing global libzpool variables in zdb and ztest ↵George Melikov2017-01-311-6/+4
| | | | | | | | | | | | | | through command line Authored by: Pavel Zakharov <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7280 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0e60744 Closes #5676
* OpenZFS 7541 - zpool import/tryimport ioctl returns ENOMEMGeorge Melikov2017-01-301-0/+2
| | | | | | | | | | | | | | | | | | | | Authored by: Pavel Zakharov <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Dan Kimmel <[email protected]> The refresh_config() calls into the kernel with ZFS_IOC_POOL_TRYIMPORT. This ioctl returns the config of the pool in a buffer pre-allocated in userland. The original estimate for the size is too conservative since it doesn't account for the large size of vdev stats that are added to the config before returning. This fix simply increases the size of the buffer passed. This results in a speed up of the zpool import process, and less spam in zfs_dbgmsg. Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7541 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3c7690 Closes #5704
* OpenZFS 7277 - zdb should be able to print zfs_dbgmsg'sGeorge Melikov2017-01-281-0/+1
| | | | | | | | | | | | | | | | | | Porting notes: - 'zfs_dbgmsg_print()' reintroduced to userspace. Authored by: Pavel Zakharov <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Igor Kozhukhov <[email protected]> Approved by: Dan McDonald <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Ported-by: George Melikov <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7277 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bdd2f Closes #5684
* OpenZFS 7301 - zpool export -f should be able to interrupt file freeingGeorge Melikov2017-01-271-0/+2
| | | | | | | | | | | | | | | Authored by: Alek Pinchuk <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Sanjay Nadkarni <[email protected]> Reviewed by: Saso Kiselkov <[email protected]> Reviewed by: John Kennedy <[email protected]> Approved by: Gordon Ross <[email protected]> Reviewed-by: Tim Chase <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: George Melikov <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7301 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/eb72182 Closes #5680
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 08:28:42 +0000