aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* Record skipped MMP writes in multihost_historyOlaf Faaland2018-03-062-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once per pass through the MMP thread's loop, the vdev tree is walked to find a suitable leaf to write the next MMP block to. If no such leaf is found, the thread sleeps for a while and resumes at the top of the loop. Add an entry to multihost_history when no leaf can be found, and record the reason in the error column. The error code for such entries is a bitfield, displayed in hex: 0x1 At least one vdev (interior or leaf) was not writeable. 0x2 At least one writeable leaf vdev was found, but it had a pending MMP write. timestamp = the time in seconds since the epoch when no leaf could be found originally. duration = the time (in ns) during which no MMP block was written for this reason. This does not include the preceeding inter-write period nor the following inter-write period. vdev_guid = the number of sequential cycles of the MMP thread looop when this occurred. Sample output, truncated to fit: For records of skipped MMP writes the right-most column, vdev_path, is reported as "-". id txg timestamp error duration mmp_delay vdev_guid ... 936 11 1520036441 0 146264 891422313 1740883117838 ... 937 11 1520036441 0 163956 888356657 7320395061548 ... 938 11 1520036442 0 130690 885314969 7320395061548 ... 939 11 1520036442 0 2001068577 882296582 1740883117838 ... 940 11 1520036443 0 161806 882296582 7320395061548 ... 941 11 1520036443 0x2 0 998020546 1 ... 942 11 1520036444 0 136585 998020546 7320395061548 ... 943 11 1520036444 0x2 0 998020257 1 ... 944 11 1520036445 5 2002662964 994160219 1740883117838 ... 945 11 1520036445 0x2 998073118 994160219 3 ... 946 11 1520036447 0 247136 994160219 7320395061548 ... Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7212
* Linux 4.16 compat: get_disk_and_module()Giuseppe Di Natale2018-03-051-0/+8
| | | | | | | | | | As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk() is now get_disk_and_module(). Add a configure check to determine if we need to use get_disk_and_module(). Reviewed-by: loli10K <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Giuseppe Di Natale <[email protected]> Closes #7264
* Change checksum & IO delay ratelimit valuesTony Hutter2018-03-042-5/+9
| | | | | | | | | | | | | | | | Change checksum & IO delay ratelimit thresholds from 5/sec to 20/sec. This allows zed to actually trigger if a bunch of these events arrive in a short period of time (zed has a threshold of 10 events in 10 sec). Previously, if you had, say, 100 checksum errors in 1 sec, it would get ratelimited to 5/sec which wouldn't trigger zed to fault the drive. Also, convert the checksum and IO delay thresholds to module params for easy testing. Reviewed-by: loli10K <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #7252
* Raw DRR_OBJECT records must write raw dataTom Caputi2018-02-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | b1d21733 made it possible for empty metadnode blocks to be compressed to a hole, fixing a bug that would cause invalid metadnode MACs when a send stream attempted to free objects and allowing the blocks to be reclaimed when they were no longer needed. However, this patch also introduced a race condition; if a txg sync occurred after a DRR_OBJECT_RANGE record was received but before any objects were added, the metadnode block would be compressed to a hole and lose all of its encryption parameters. This would cause subsequent DRR_OBJECT records to fail when they attempted to write their data into an unencrypted block. This patch defers the DRR_OBJECT_RANGE handling to receive_object() so that the encryption parameters are set with each object that is written into that block. Reviewed-by: Kash Pande <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7215 Closes #7236
* Incorrect maximum DVA value in DDE_GET_NDVAS()Tim Chase2018-02-261-1/+1
| | | | | | | | | | The conditional was reversed which caused garbage values to be used when calculating dds_ref_dsize. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tom Caputi <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Tim Chase <[email protected]> Closes #7234
* Fix free memory calculation on v3.14+chrisrd2018-02-232-1/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide infrastructure to auto-configure to enum and API changes in the global page stats used for our free memory calculations. arc_free_memory has been broken since an API change in Linux v3.14: 2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node 2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node vmstats These commits moved some of global_page_state() into global_node_page_state(). The API change was particularly egregious as, instead of breaking the old code, it silently did the wrong thing and we continued using global_page_state() where we should have been using global_node_page_state(), thus indexing into the wrong array via NR_SLAB_RECLAIMABLE et al. There have been further API changes along the way: 2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to node counters 2017-09-06 v4.14 c41f012a mm: rename global_page_state to global_zone_page_state ...and various (incomplete, as it turns out) attempts to accomodate these changes in ZoL: 2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats 2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc 2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc The config infrastructure provided here resolves these issues going back to the original API change in v3.14 and is robust against further Linux changes in this area. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Chris Dunlop <[email protected]> Closes #7170
* Report duration and error in mmp_history entriesOlaf Faaland2018-02-223-1/+5
| | | | | | | | | | | | | | | | | | | | | | After an MMP write completes, update the relevant mmp_history entry with the time between submission and completion, and the error status of the write. [faaland1@toss3a zfs]$ cat /proc/spl/kstat/zfs/pool/multihost 39 0 0x01 100 8800 69147946270893 72723903122926 id txg timestamp error duration mmp_delay vdev_guid 10607 1166 1518985089 0 138301 637785455 4882... 10608 1166 1518985089 0 136154 635407747 1151... 10609 1166 1518985089 0 803618560 633048078 9740... 10610 1166 1518985090 0 144826 633048078 4882... 10611 1166 1518985090 0 164527 666187671 1151... Where duration = gethrtime_in_done_fn - gethrtime_at_submission, and error = zio->io_error. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7190
* Linux 4.16 compat: use correct *_dec_and_test()Tony Hutter2018-02-221-1/+5
| | | | | | | | | | Use refcount_dec_and_test() on 4.16+ kernels, atomic_dec_and_test() on older kernels. https://lwn.net/Articles/714974/ Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes: #7179 Closes: #7211
* Want 'zfs send -b'LOLi2018-02-211-0/+3
| | | | | | | | | | | | | | | This change implements 'zfs send -b' which can be used to send only received property values whether or not they are overridden by local settings. This can be very useful during "restore" operations from a backup pool because it allows to send only the property values originally sent from the backup source, even though they were later modified on the destination either by a 'zfs set' operation, explicit 'zfs inherit' or overridden during the receive process via 'zfs receive -o|-x'. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #7156
* Raw receive should change key atomicallyTom Caputi2018-02-212-2/+7
| | | | | | | | | | | | | | | | | Currently, raw zfs sends transfer the encrypted master keys and objset_phys_t encryption parameters in the DRR_BEGIN payload of each send file. Both of these are processed as soon as they are read in dmu_recv_stream(), meaning that the new keys are set before the new snapshot is received. In addition to the fact that this changes the user's keys for the dataset earlier than they might expect, the keys were never reset to what they originally were in the event that the receive failed. This patch splits the processing into objset handling and key handling, the later of which is moved to dmu_recv_end() so that they key change can be done atomically. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7200
* Raw receives must compress metadnode blocksTom Caputi2018-02-211-2/+0
| | | | | | | | | | | | | | | | | | | Currently, the DMU relies on ZIO layer compression to free LO dnode blocks that no longer have objects in them. However, raw receives disable all compression, meaning that these blocks can never be freed. In addition to the obvious space concerns, this could also cause incremental raw receives to fail to mount since the MAC of a hole is different from that of a completely zeroed block. This patch corrects this issue by adding a special case in zio_write_compress() which will attempt to compress these blocks to a hole even if ZIO_FLAG_RAW_ENCRYPT is set. This patch also removes the zfs_mdcomp_disable tunable, since tuning it could cause these same issues. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7198
* ZIL claiming should not start user accountingTom Caputi2018-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | Currently, ZIL claiming dirties objsets which causes dsl_pool_sync() to attempt to perform user accounting on them. This causes problems for encrypted datasets that were raw received before the system went offline since they cannot perform user accounting until they have their keys loaded. This triggers an ASSERT in zio_encrypt(). Since encryption was added, the code now depends on the fact that data should only be written when objsets are owned. This patch adds a check in dmu_objset_do_userquota_updates() to ensure that useraccounting is only done when the objsets are actually owned for write. As part of this work, the zfsvfs and zvol code was updated so that it no longer lies about owning objsets readonly. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #6916 Closes #7163
* Fix coverity defects: zfs channel programsDon Brady2018-02-201-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CID 173243, 173245: Memory - corruptions (OVERRUN) Added size argument to lcompat_sprintf() to avoid use of INT_MAX CID 173244: Integer handling issues (OVERFLOW_BEFORE_WIDEN) Added cast to uint64_t to avoid a 32 bit overflow warning CID 173242: Integer handling issues (CONSTANT_EXPRESSION_RESULT) Conditionally removed unused luai_numisnan() floating point check CID 173241: Resource leaks (RESOURCE_LEAK) Added missing close(fd) on error path CID 173240: (UNINIT) Fixed uninitialized variable in get_special_prop() CID 147560: Null pointer dereferences (NULL_RETURNS) Cleaned up bad code merge in dsl_dataset_promote_check() CID 28475: Memory - illegal accesses (OVERRUN) Fixed lcompat_sprintf() to use a size paramater CID 28418, 28422: Error handling issues (CHECKED_RETURN) Added function result cast to (void) to avoid warning CID 23935, 28411, 28412: Memory - corruptions (ARRAY_VS_SINGLETON) Added casts to avoid exposing result as an array Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #7181
* OpenZFS 8857 - zio_remove_child() panic due to already destroyed parent zioGeorge Wilson2018-02-141-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM ======= It's possible for a parent zio to complete even though it has children which have not completed. This can result in the following panic: > $C ffffff01809128c0 vpanic() ffffff01809128e0 mutex_panic+0x58(fffffffffb94c904, ffffff597dde7f80) ffffff0180912950 mutex_vector_enter+0x347(ffffff597dde7f80) ffffff01809129b0 zio_remove_child+0x50(ffffff597dde7c58, ffffff32bd901ac0, ffffff3373370908) ffffff0180912a40 zio_done+0x390(ffffff32bd901ac0) ffffff0180912a70 zio_execute+0x78(ffffff32bd901ac0) ffffff0180912b30 taskq_thread+0x2d0(ffffff33bae44140) ffffff0180912b40 thread_start+8() > ::status debugging crash dump vmcore.2 (64-bit) from batfs0390 operating system: 5.11 joyent_20170911T171900Z (i86pc) image uuid: (not set) panic message: mutex_enter: bad mutex, lp=ffffff597dde7f80 owner=ffffff3c59b39480 thread=ffffff0180912c40 dump content: kernel pages only The problem is that dbuf_prefetch along with l2arc can create a zio tree which confuses the parent zio and allows it to complete with while children still exist. Here's the scenario: zio tree: pio |--- lio The parent zio, pio, has entered the zio_done stage and begins to check its children to see there are still some that have not completed. In zio_done(), the children are checked in the following order: zio_wait_for_children(zio, ZIO_CHILD_VDEV, ZIO_WAIT_DONE) zio_wait_for_children(zio, ZIO_CHILD_GANG, ZIO_WAIT_DONE) zio_wait_for_children(zio, ZIO_CHILD_DDT, ZIO_WAIT_DONE) zio_wait_for_children(zio, ZIO_CHILD_LOGICAL, ZIO_WAIT_DONE) If pio, finds any child which has not completed then it stops executing and goes to sleep. Each call to zio_wait_for_children() will grab the io_lock while checking the particular child. In this scenario, the pio has completed the first call to zio_wait_for_children() to check for any ZIO_CHILD_VDEV children. Since the only zio in the zio tree right now is the logical zio, lio, then it completes that call and prepares to check the next child type. In the meantime, the lio completes and in its callback creates a child vdev zio, cio. The zio tree looks like this: zio tree: pio |--- lio |--- cio The lio then grabs the parent's io_lock and removes itself. zio tree: pio |--- cio The pio continues to run but has already completed its check for ZIO_CHILD_VDEV and will erroneously complete. When the child zio, cio, completes it will panic the system trying to reference the parent zio which has been destroyed. SOLUTION ======== The fix is to rework the zio_wait_for_children() logic to accept a bitfield for all the children types that it's interested in checking. The io_lock will is held the entire time we check all the children types. Since the function now accepts a bitfield, a simple ZIO_CHILD_BIT() macro is provided to allow for the conversion between a ZIO_CHILD type and the bitfield used by the zio_wiat_for_children logic. Authored by: George Wilson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Andriy Gapon <[email protected]> Reviewed by: Youzhong Yang <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8857 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/862ff6d99c Issue #5918 Closes #7168
* Project Quota on ZFSNasf-Fan2018-02-1315-22/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by Ned Bass <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Fan Yong <[email protected]> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
* Handle zap_add() failures in mixed case modesanjeevbagewadi2018-02-091-4/+11
| | | | | | | | | | | | | | With "casesensitivity=mixed", zap_add() could fail when the number of files/directories with the same name (varying in case) exceed the capacity of the leaf node of a Fatzap. This results in a ASSERT() failure as zfs_link_create() does not expect zap_add() to fail. The fix is to handle these failures and rollback the transactions. Reviewed by: Matt Ahrens <[email protected]> Reviewed-by: Chunwei Chen <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Sanjeev Bagewadi <[email protected]> Closes #7011 Closes #7054
* Linux 4.11 compat: avoid refcount_t name conflictBrian Behlendorf2018-02-081-0/+6
| | | | | | | | | | | | | | | Related to commit 4859fe796, when directly using the kernel's refcount functions in kernel compatibility code do not map refcount_t to zfs_refcount_t. This leads to a type mismatch. Longer term we should consider renaming refcount_t to zfs_refcount_t in the zfs code base. Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7148
* Linux 4.16 compat: inode_set_iversion()Brian Behlendorf2018-02-082-4/+16
| | | | | | | | | | | | | | | A new interface was added to manipulate the version field of an inode. Add a inode_set_iversion() wrapper for older kernels and use the new interface when available. The i_version field was dropped from the trace point due to the switch to an atomic64_t i_version type. Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7148
* OpenZFS 8677 - Open-Context Channel ProgramsSerapheim Dimitropoulos2018-02-083-13/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Chris Williamson <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> We want to be able to run channel programs outside of synching context. This would greatly improve performance for channel programs that just gather information, as they won't have to wait for synching context anymore. === What is implemented? This feature introduces the following: - A new command line flag in "zfs program" to specify our intention to run in open context. (The -n option) - A new flag/option within the channel program ioctl which selects the context. - Appropriate error handling whenever we try a channel program in open-context that contains zfs.sync* expressions. - Documentation for the new feature in the manual pages. === How do we handle zfs.sync functions in open context? When such a function is found by the interpreter and we are running in open context we abort the script and we spit out a descriptive runtime error. For example, given the script below ... arg = ... fs = arg["argv"][1] err = zfs.sync.destroy(fs) msg = "destroying " .. fs .. " err=" .. err return msg if we run it in open context, we will get back the following error: Channel program execution failed: [string "channel program"]:3: running functions from the zfs.sync submodule requires passing sync=TRUE to lzc_channel_program() (i.e. do not specify the "-n" command line argument) stack traceback: [C]: in function 'destroy' [string "channel program"]:3: in main chunk === What about testing? We've introduced new wrappers for all channel program tests that run each channel program as both (startard & open-context) and expect the appropriate behavior depending on the program using the zfs.sync module. OpenZFS-issue: https://www.illumos.org/issues/8677 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15 Closes #6558
* OpenZFS 8604 - Simplify snapshots unmounting codeSerapheim Dimitropoulos2018-02-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Andy Stormont <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> Every time we want to unmount a snapshot (happens during snapshot deletion or renaming) we unnecessarily iterate through all the mountpoints in the VFS layer (see zfs_get_vfs). The current patch completely gets rid of that code and changes the approach while keeping the behavior of that code path the same. Specifically, it puts a hold on the dataset/snapshot and gets its vfs resource reference directly, instead of linearly searching for it. If that reference exists we attempt to amount it. With the above change, it became obvious that the nvlist manipulations that we do (add_boolean and add_nvlist) take a significant amount of time ensuring uniqueness of every new element even though they don't have too. Thus, we updated the patch so those nvlists are not trying to enforce the uniqueness of their elements. A more complete analysis of the problem solved by this patch can be found below: https://sdimitro.github.io/post/snap-unmount-perf/ OpenZFS-issue: https://www.illumos.org/issues/8604 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/126118fb
* OpenZFS 8600 - ZFS channel programs - snapshotChris Williamson2018-02-082-3/+10
| | | | | | | | | | | | | | | | | Authored by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Brad Lewis <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> ZFS channel programs should be able to create snapshots. In addition to the base snapshot functionality, this entails extra logic to handle edge cases which were formerly not possible, such as creating then destroying a snapshot in the same transaction sync. OpenZFS-issue: https://www.illumos.org/issues/8600 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68089b8b
* OpenZFS 8592 - ZFS channel programs - rollbackBrad Lewis2018-02-081-1/+11
| | | | | | | | | | | | | Authored by: Brad Lewis <[email protected]> Reviewed by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Don Brady <[email protected]> ZFS channel programs should be able to perform a rollback. OpenZFS-issue: https://www.illumos.org/issues/8592 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d46b5ed6
* OpenZFS 7431 - ZFS Channel ProgramsChris Williamson2018-02-0819-16/+1636
| | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported-by: Don Brady <[email protected]> Ported-by: John Kennedy <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7431 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533 Porting Notes: * The CLI long option arguments for '-t' and '-m' don't parse on linux * Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc * Lua implementation is built as its own module (zlua.ko) * Lua headers consumed directly by zfs code moved to 'include/sys/lua/' * There is no native setjmp/longjump available in stock Linux kernel. Brought over implementations from illumos and FreeBSD * The get_temporary_prop() was adapted due to VFS platform differences * Use of inline functions in lua parser to reduce stack usage per C call * Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
* Change os->os_next_write_raw to work per txgTom Caputi2018-02-021-1/+1
| | | | | | | | | | | | | | | | | | | Currently, os_next_write_raw is a single boolean used for determining whether or not the next call to dmu_objset_sync() should write out the objset_phys_t as a raw buffer. Since the boolean is not associated with a txg, the work simply happens during the next txg, which is not necessarily the correct one. In the current implementation this issue was misdiagnosed, resulting in a small hack in dmu_objset_sync() which seemed to resolve the problem. This patch changes os_next_write_raw to be an array of booleans, one for each txg in TXG_OFF and removes the hack. Reviewed-by: Jorgen Lundman <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #6864
* Raw sends must be able to decrease nlevelsTom Caputi2018-02-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when a raw zfs send file includes a DRR_OBJECT record that would decrease the number of levels of an existing object, the object is reallocated with dmu_object_reclaim() which creates the new dnode using the old object's nlevels. For non-raw sends this doesn't really matter, but raw sends require that nlevels on the receive side match that of the send side so that the checksum-of-MAC tree can be properly maintained. This patch corrects the issue by freeing the object completely before allocating it again in this case. This patch also corrects several issues with dnode_hold_impl() and related functions that prevented dnodes (particularly multi-slot dnodes) from being reallocated properly due to the fact that existing dnodes were not being fully cleaned up when they were freed. This patch adds a test to make sure that zfs recv functions properly with incremental streams containing dnodes of different sizes. Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Jorgen Lundman <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6821 Closes #6864
* Encryption Stability and On-Disk Format FixesTom Caputi2018-02-027-5/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The on-disk format for encrypted datasets protects not only the encrypted and authenticated blocks themselves, but also the order and interpretation of these blocks. In order to make this work while maintaining the ability to do raw sends, the indirect bps maintain a secure checksum of all the MACs in the block below it along with a few other fields that determine how the data is interpreted. Unfortunately, the current on-disk format erroneously includes some fields which are not portable and thus cannot support raw sends. It is not possible to easily work around this issue due to a separate and much smaller bug which causes indirect blocks for encrypted dnodes to not be compressed, which conflicts with the previous bug. In addition, the current code generates incompatible on-disk formats on big endian and little endian systems due to an issue with how block pointers are authenticated. Finally, raw send streams do not currently include dn_maxblkid when sending both the metadnode and normal dnodes which are needed in order to ensure that we are correctly maintaining the portable objset MAC. This patch zero's out the offending fields when computing the bp MAC and ensures that these MACs are always calculated in little endian order (regardless of the host system's byte order). This patch also registers an errata for the old on-disk format, which we detect by adding a "version" field to newly created DSL Crypto Keys. We allow datasets without a version (version 0) to only be mounted for read so that they can easily be migrated. We also now include dn_maxblkid in raw send streams to ensure the MAC can be maintained correctly. This patch also contains minor bug fixes and cleanups. Reviewed-by: Jorgen Lundman <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #6845 Closes #6864 Closes #7052
* tx_waited -> tx_dirty_delayed in trace_dmu.hDr. András Korn2018-01-311-5/+6
| | | | | | | | | | This change was missed in 0735ecb33485e91a78357a274e47c2782858d8b9. Reviewed-by: Fabian Grünbichler <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: András Korn <[email protected]> Closes #7096
* OpenZFS 8997 - ztest assertion failure in zil_lwb_write_issuePrakash Surya2018-01-262-10/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM ======= When `dmu_tx_assign` is called from `zil_lwb_write_issue`, it's possible for either `ERESTART` or `EIO` to be returned. If `ERESTART` is returned, this will cause an assertion to fail directly in `zil_lwb_write_issue`, where the code assumes the return value is `EIO` if `dmu_tx_assign` returns a non-zero value. This can occur if the SPA is suspended when `dmu_tx_assign` is called, and most often occurs when running `zloop`. If `EIO` is returned, this can cause assertions to fail elsewhere in the ZIL code. For example, `zil_commit_waiter_timeout` contains the following logic: lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb); ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED); In this case, if `dmu_tx_assign` returned `EIO` from within `zil_lwb_write_issue`, the `lwb` variable passed in will not be issued to disk. Thus, it's `lwb_state` field will remain `LWB_STATE_OPENED` and this assertion will fail. `zil_commit_waiter_timeout` assumes that after it calls `zil_lwb_write_issue`, the `lwb` will be issued to disk, and doesn't handle the case where this is not true; i.e. it doesn't handle the case where `dmu_tx_assign` returns `EIO`. SOLUTION ======== This change modifies the `dmu_tx_assign` function such that `txg_how` is a bitmask, rather than of the `txg_how_t` enum type. Now, the previous `TXG_WAITED` semantics can be used via `TXG_NOTHROTTLE`, along with specifying either `TXG_NOWAIT` or `TXG_WAIT` semantics. Previously, when `TXG_WAITED` was specified, `TXG_NOWAIT` semantics was automatically invoked. This was not ideal when using `TXG_WAITED` within `zil_lwb_write_issued`, leading the problem described above. Rather, we want to achieve the semantics of `TXG_WAIT`, while also preventing the `tx` from being penalized via the dirty delay throttling. With this change, `zil_lwb_write_issued` can acheive the semtantics that it requires by passing in the value `TXG_WAIT | TXG_NOTHROTTLE` to `dmu_tx_assign`. Further, consumers of `dmu_tx_assign` wishing to achieve the old `TXG_WAITED` semantics can pass in the value `TXG_NOWAIT | TXG_NOTHROTTLE`. Authored by: Prakash Surya <[email protected]> Approved by: Robert Mustacchi <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Andriy Gapon <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Porting Notes: - Additionally updated `zfs_tmpfile` to use `TXG_NOTHROTTLE` OpenZFS-issue: https://www.illumos.org/issues/8997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/19ea6cb0f9 Closes #7084
* Extend deadman logicBrian Behlendorf2018-01-256-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The intent of this patch is extend the existing deadman code such that it's flexible enough to be used by both ztest and on production systems. The proposed changes include: * Added a new `zfs_deadman_failmode` module option which is used to dynamically control the behavior of the deadman. It's loosely modeled after, but independant from, the pool failmode property. It can be set to wait, continue, or panic. * wait - Wait for the "hung" I/O (default) * continue - Attempt to recover from a "hung" I/O * panic - Panic the system * Added a new `zfs_deadman_ziotime_ms` module option which is analogous to `zfs_deadman_synctime_ms` except instead of applying to a pool TXG sync it applies to zio_wait(). A default value of 300s is used to define a "hung" zio. * The ztest deadman thread has been re-enabled by default, aligned with the upstream OpenZFS code, and then extended to terminate the process when it takes significantly longer to complete than expected. * The -G option was added to ztest to print the internal debug log when a fatal error is encountered. This same option was previously added to zdb in commit fa603f82. Update zloop.sh to unconditionally pass -G to obtain additional debugging. * The FM_EREPORT_ZFS_DELAY event which was previously posted when the deadman detect a "hung" pool has been replaced by a new dedicated FM_EREPORT_ZFS_DEADMAN event. * The proposed recovery logic attempts to restart a "hung" zio by calling zio_interrupt() on any outstanding leaf zios. We may want to further restrict this to zios in either the ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages. Calling zio_interrupt() is expected to only be useful for cases when an IO has been submitted to the physical device but for some reasonable the completion callback hasn't been called by the lower layers. This shouldn't be possible but has been observed and may be caused by kernel/driver bugs. * The 'zfs_deadman_synctime_ms' default value was reduced from 1000s to 600s. * Depending on how ztest fails there may be no cache file to move. This should not be considered fatal, collect the logs which are available and carry on. * Add deadman test cases for spa_deadman() and zio_wait(). * Increase default zfs_deadman_checktime_ms to 60s. Reviewed-by: Tim Chase <[email protected]> Reviewed by: Thomas Caputi <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6999
* OpenZFS 8652 - Tautological comparisons with ZPROP_INVALBrian Behlendorf2018-01-191-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usr/src/uts/common/sys/fs/zfs.h Change ZPROP_INVAL and ZPROP_CONT from macros to enum values. Clang and GCC both prefer to use unsigned ints to store enums. That was causing tautological comparison warnings (and likely eliminating error handling code at compile time) whenever a zfs_prop_t or zpool_prop_t was compared to ZPROP_INVAL or ZPROP_CONT. Making the error flags be explicity enum values forces the enum types to be signed. ZPROP_INVAL was also compared against two different enum types. I had to change its name to ZPOOL_PROP_INVAL whenever its compared to a zpool_prop_t. There are still some places where ZPROP_INVAL or ZPROP_CONT is compared to a plain int, in code that doesn't know whether the int is storing a zfs_prop_t or a zpool_prop_t. usr/src/uts/common/fs/zfs/spa.c s/ZPROP_INVAL/ZPOOL_PROP_INVAL/ Authored by: Alan Somers <[email protected]> Approved by: Gordon Ross <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Igor Kozhukhov <[email protected]> Reviewed by: George Melikov <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8652 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c2de80dc74 Closes #7061
* OpenZFS 8959 - Add notifications when a scrub is paused or resumedSean Eric Fagan2018-01-171-0/+3
| | | | | | | | | | | | | | | | | | | Authored by: Sean Eric Fagan <[email protected]> Reviewed by: Alek Pinchuk <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Approved by: Gordon Ross <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> Porting Notes: - Brought #defines in eventdefs.h in line with ZFS on Linux format. - Updated zfs-events.5 with the new events. OpenZFS-issue: https://www.illumos.org/issues/8959 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c862b93eea Closes #7049
* Force ztest to always use /dev/urandomBrian Behlendorf2018-01-121-0/+2
| | | | | | | | | | | | For ztest, which is solely for testing, using a pseudo random is entirely reasonable. Using /dev/urandom ensures the system entropy pool doesn't get depleted thus stalling the testing. This is a particular problem when testing in VMs. Reviewed-by: Tim Chase <[email protected]> Reviewed by: Thomas Caputi <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #7017 Closes #7036
* Revert raidz_map and _col structure typesNathaniel Wesley Filardo2018-01-091-17/+17
| | | | | | | | | | | | | | | As part of the refactoring of ab9f4b0b824ab4cc64a4fa382c037f4154de12d6, several uint64_t-s and uint8_t-s were changed to other types. This caused ZoL github issue #6981, an overflow of a size_t on a 32-bit ARM machine. In absense of any strong motivation for the type changes, this simply puts them back, modulo the changes accumulated for ABD. Compile-tested on amd64 and run-tested on armhf. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Gvozden Neskovic <[email protected]> Signed-off-by: Nathaniel Wesley Filardo <[email protected]> Closes #6981 Closes #7023
* Fix ARC hit rateBrian Behlendorf2018-01-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When the compressed ARC feature was added in commit d3c2ae1 the method of reference counting in the ARC was modified. As part of this accounting change the arc_buf_add_ref() function was removed entirely. This would have be fine but the arc_buf_add_ref() function served a second undocumented purpose of updating the ARC access information when taking a hold on a dbuf. Without this logic in place a cached dbuf would not migrate its associated arc_buf_hdr_t to the MFU list. This would negatively impact the ARC hit rate, particularly on systems with a small ARC. This change reinstates the missing call to arc_access() from dbuf_hold() by implementing a new arc_buf_access() function. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Tim Chase <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6171 Closes #6852 Closes #6989
* OpenZFS 8909 - 8585 can cause a use-after-free kernel panicPrakash Surya2017-12-283-8/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Prakash Surya <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Brad Lewis <[email protected]> Reviewed by: Igor Kozhukhov <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Prakash Surya <[email protected]> PROBLEM ======= There's a race condition that exists if `zil_free_lwb` races with either `zil_commit_waiter_timeout` and/or `zil_lwb_flush_vdevs_done`. Here's an example panic due to this bug: > ::status debugging crash dump vmcore.0 (64-bit) from ip-10-110-205-40 operating system: 5.11 dlpx-5.2.2.0_2017-12-04-17-28-32b6ba51fb (i86pc) image uuid: 4af0edfb-e58e-6ed8-cafc-d3e9167c7513 panic message: BAD TRAP: type=e (#pf Page fault) rp=ffffff0010555970 addr=60 occurred in module "zfs" due to a NULL pointer dereference dump content: kernel pages only > $c zio_shrink+0x12() zil_lwb_write_issue+0x30d(ffffff03dcd15cc0, ffffff03e0730e20) zil_commit_waiter_timeout+0xa2(ffffff03dcd15cc0, ffffff03d97ffcf8) zil_commit_waiter+0xf3(ffffff03dcd15cc0, ffffff03d97ffcf8) zil_commit+0x80(ffffff03dcd15cc0, 9a9) zfs_write+0xc34(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0) fop_write+0x5b(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0) write+0x250(42, fffffd7ff4832000, 2000) sys_syscall+0x177() If there's an outstanding lwb that's in `zil_commit_waiter_timeout` waiting to timeout, waiting on it's waiter's CV, we must be sure not to call `zil_free_lwb`. If we end up calling `zil_free_lwb`, then that LWB may be freed and can result in a use-after-free situation where the stale lwb pointer stored in the `zil_commit_waiter_t` structure of the thread waiting on the waiter's CV is used. A similar situation can occur if an lwb is issued to disk, and thus in the `LWB_STATE_ISSUED` state, and `zil_free_lwb` is called while the disk is servicing that lwb. In this situation, the lwb will be freed by `zil_free_lwb`, which will result in a use-after-free situation when the lwb's zio completes, and `zil_lwb_flush_vdevs_done` is called. This race condition is prevented in `zil_close` by calling `zil_commit` before `zil_free_lwb` is called, which will ensure all outstanding (i.e. all lwb's in the `LWB_STATE_OPEN` and/or `LWB_STATE_ISSUED` states) reach the `LWB_STATE_DONE` state before the lwb's are freed (`zil_commit` will not return untill all the lwb's are `LWB_STATE_DONE`). Further, this race condition is prevented in `zil_sync` by only calling `zil_free_lwb` for lwb's that do not have their `lwb_buf` pointer set. All lwb's not in the `LWB_STATE_DONE` state will have a non-null value for this pointer; the pointer is only cleared in `zil_lwb_flush_vdevs_done`, at which point the lwb's state will be changed to `LWB_STATE_DONE`. This race *is* present in `zil_suspend`, leading to this bug. At first glance, it would appear as though this would not be true because `zil_suspend` will call `zil_commit`, just like `zil_close`, but the problem is that `zil_suspend` will set the zilog's `zl_suspend` field prior to calling `zil_commit`. Further, in `zil_commit`, if `zl_suspend` is set, `zil_commit` will take a special branch of logic and use `txg_wait_synced` instead of performing the normal `zil_commit` logic. This call to `txg_wait_synced` might be good enough for the data to reach disk safely before it returns, but it does not ensure that all outstanding lwb's reach the `LWB_STATE_DONE` state before it returns. This is because, if there's an lwb "stuck" in `zil_commit_waiter_timeout`, waiting for it's lwb to timeout, it will maintain a non-null value for it's `lwb_buf` field and thus `zil_sync` will not free that lwb. Thus, even though the lwb's data is already on disk, the lwb will be left lingering, waiting on the CV, and will eventually timeout and be issued to disk even though the write is unnecessary. So, after `zil_commit` is called from `zil_suspend`, we incorrectly assume that there are not outstanding lwb's, and proceed to free all lwb's found on the zilog's lwb list. As a result, we free the lwb that will later be used `zil_commit_waiter_timeout`. SOLUTION ======== The solution to this, is to ensure all outstanding lwb's complete before calling `zil_free_lwb` via `zil_destroy` in `zil_suspend`. This patch accomplishes this goal by forcing the normal `zil_commit` logic when called from `zil_sync`. Now, `zil_suspend` will call `zil_commit_impl` which will always use the normal logic of waiting/issuing lwb's to disk before it returns. As a result, any lwb's outstanding when `zil_commit_impl` is called will be guaranteed to reach the `LWB_STATE_DONE` state by the time it returns. Further, no new lwb's will be created via `zil_commit` since the zilog's `zl_suspend` flag will be set. This will force all new callers of `zil_commit` to use `txg_wait_synced` instead of creating and issuing new lwb's. Thus, all lwb's left on the zilog's lwb list when `zil_destroy` is called will be in the `LWB_STATE_DONE` state, and we'll avoid this race condition. OpenZFS-issue: https://www.illumos.org/issues/8909 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ece62b6f8d Closes #6940
* Call commit callbacks from the tail of the listlidongyang2017-12-222-4/+5
| | | | | | | | | | | | | | | | | | | | Our zfs backed Lustre MDT had soft lockups while under heavy metadata workloads while handling transaction callbacks from osd_zfs. The problem is zfs is not taking advantage of the fast path in Lustre's trans callback handling, where Lustre will skip the calls to ptlrpc_commit_replies() when it already saw a higher transaction number. This patch corrects this, it also has a positive impact on metadata performance on Lustre with osd_zfs, plus some cleanup in the headers. A similar issue for ext4/ldiskfs is described on: https://jira.hpdd.intel.com/browse/LU-6527 Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Li Dongyang <[email protected]> Closes #6986
* Support re-prioritizing asynchronous prefetchesTom Caputi2017-12-214-1/+5
| | | | | | | | | | | | | | | | | | | | | When sequential scrubs were merged, all calls to arc_read() (including prefetch IOs) were given ZIO_PRIORITY_ASYNC_READ. Unfortunately, this behaves badly with an existing issue where prefetch IOs cannot be re-prioritized after the issue. The result is that synchronous reads end up in the same vdev_queue as the scrub IOs and can have (in some workloads) multiple seconds of latency. This patch incorporates 2 changes. The first ensures that all scrub IOs are given ZIO_PRIORITY_SCRUB to allow the vdev_queue code to differentiate between these I/Os and user prefetches. Second, this patch introduces zio_change_priority() to provide the missing capability to upgrade a zio's priority. Reviewed by: George Wilson <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #6921 Closes #6926
* Suppress incorrect objtool warningsBrian Behlendorf2017-12-072-0/+37
| | | | | | | | | | | | Suppress incorrect warnings from versions of objtool which are not aware of x86 EVEX prefix instructions used for AVX512. module/zfs/vdev_raidz_math_avx512bw.o: warning: objtool: <func+offset>: can't find jump dest instruction at .text Reviewed-by: Don Brady <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6928
* OpenZFS 8603 - rename zilog's "zl_writer_lock" to "zl_issuer_lock"Prakash Surya2017-12-061-5/+5
| | | | | | | | | | | | | | | | This is a purely cosmetic change. The zilog's "zl_writer_lock" field is being renamed to "zl_issuer_lock" to try and make the code easier to understand; no other changes are made. Authored by: Prakash Surya <[email protected]> Reviewed by: C Fraire <[email protected]> Approved by: Dan McDonald <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported-by: Giuseppe Di Natale <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8603 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2daf06546b Closes #6927
* OpenZFS 8585 - improve batching done in zil_commit()Prakash Surya2017-12-055-85/+233
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Prakash Surya <[email protected]> Reviewed by: Brad Lewis <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Prakash Surya <[email protected]> Problem ======= The current implementation of zil_commit() can introduce significant latency, beyond what is inherent due to the latency of the underlying storage. The additional latency comes from two main problems: 1. When there's outstanding ZIL blocks being written (i.e. there's already a "writer thread" in progress), then any new calls to zil_commit() will block waiting for the currently oustanding ZIL blocks to complete. The blocks written for each "writer thread" is coined a "batch", and there can only ever be a single "batch" being written at a time. When a batch is being written, any new ZIL transactions will have to wait for the next batch to be written, which won't occur until the current batch finishes. As a result, the underlying storage may not be used as efficiently as possible. While "new" threads enter zil_commit() and are blocked waiting for the next batch, it's possible that the underlying storage isn't fully utilized by the current batch of ZIL blocks. In that case, it'd be better to allow these new threads to generate (and issue) a new ZIL block, such that it could be serviced by the underlying storage concurrently with the other ZIL blocks that are being serviced. 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch" to complete, prior to zil_commit() returning. The size of any given batch is proportional to the number of ZIL transaction in the queue at the time that the batch starts processing the queue; which doesn't occur until the previous batch completes. Thus, if there's a lot of transactions in the queue, the batch could be composed of many ZIL blocks, and each call to zil_commit() will have to wait for all of these writes to complete (even if the thread calling zil_commit() only cared about one of the transactions in the batch). To further complicate the situation, these two issues result in the following side effect: 3. If a given batch takes longer to complete than normal, this results in larger batch sizes, which then take longer to complete and further drive up the latency of zil_commit(). This can occur for a number of reasons, including (but not limited to): transient changes in the workload, and storage latency irregularites. Solution ======== The solution attempted by this change has the following goals: 1. no on-disk changes; maintain current on-disk format. 2. modify the "batch size" to be equal to the "ZIL block size". 3. allow new batches to be generated and issued to disk, while there's already batches being serviced by the disk. 4. allow zil_commit() to wait for as few ZIL blocks as possible. 5. use as few ZIL blocks as possible, for the same amount of ZIL transactions, without introducing significant latency to any individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks. In theory, with these goals met, the new allgorithm will allow the following improvements: 1. new ZIL blocks can be generated and issued, while there's already oustanding ZIL blocks being serviced by the storage. 2. the latency of zil_commit() should be proportional to the underlying storage latency, rather than the incoming synchronous workload. Porting Notes ============= Due to the changes made in commit 119a394ab0, the lifetime of an itx structure differs than in OpenZFS. Specifically, the itx structure is kept around until the data associated with the itx is considered to be safe on disk; this is so that the itx's callback can be called after the data is committed to stable storage. Since OpenZFS doesn't have this itx callback mechanism, it's able to destroy the itx structure immediately after the itx is committed to an lwb (before the lwb is written to disk). To support this difference, and to ensure the itx's callbacks can still be called after the itx's data is on disk, a few changes had to be made: * A list of itxs was added to the lwb structure. This list contains all of the itxs that have been committed to the lwb, such that the callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(), after the data for the itxs is committed to disk. * A list of itxs was added on the stack of the zil_process_commit_list() function; the "nolwb_itxs" list. In some circumstances, an itx may not be committed to an lwb (e.g. if allocating the "next" ZIL block on disk fails), so this list is used to keep track of which itxs fall into this state, such that their callbacks can be called after the ZIL's writer pipeline is "stalled". * The logic to actually call the itx's callback was moved into the zil_itx_destroy() function. Since all consumers of zil_itx_destroy() were effectively performing the same logic (i.e. if callback is non-null, call the callback), it seemed like useful code cleanup to consolidate this logic into a single function. Additionally, the existing Linux tracepoint infrastructure dealing with the ZIL's probes and structures had to be updated to reflect these code changes. Specifically: * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be removed from "trace_zil.h" as well. * Some of the zilog structure's fields were removed, which affected the tracepoint definitions of the structure. * New tracepoints had to be added for the following 3 new probes: * zil__process__commit__itx * zil__process__normal__itx * zil__commit__io__error OpenZFS-issue: https://www.illumos.org/issues/8585 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a Closes #6566
* Preserve itx alloc size for zio_data_buf_free()Brian Behlendorf2017-12-041-0/+1
| | | | | | | | | | | | | | Using zio_data_buf_alloc() to allocate the itx's may be unsafe because the itx->itx_lr.lrc_reclen field is not constant from allocation to free. Using a different itx->itx_lr.lrc_reclen size in zio_data_buf_free() can result in the allocation being returned to the wrong kmem cache. This issue can be avoided entirely by storing the allocation size in itx->itx_size and using that for zio_data_buf_free(). Reviewed by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6912
* Unbreak the scan status ABITom Caputi2017-11-301-1/+1
| | | | | | | | | | When d4a72f23 was merged, pss_pass_issued was incorrectly added to the middle of the pool_scan_stat_t structure instead of the end. This patch simply corrects this issue. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #6909
* Sequential scrub and resilversTom Caputi2017-11-157-28/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, scrubs and resilvers can take an extremely long time to complete. This is largely due to the fact that zfs scans process pools in logical order, as determined by each block's bookmark. This makes sense from a simplicity perspective, but blocks in zfs are often scattered randomly across disks, particularly due to zfs's copy-on-write mechanisms. This patch improves performance by splitting scrubs and resilvers into a metadata scanning phase and an IO issuing phase. The metadata scan reads through the structure of the pool and gathers an in-memory queue of I/Os, sorted by size and offset on disk. The issuing phase will then issue the scrub I/Os as sequentially as possible, greatly improving performance. This patch also updates and cleans up some of the scan code which has not been updated in several years. Reviewed-by: Brian Behlendorf <[email protected]> Authored-by: Saso Kiselkov <[email protected]> Authored-by: Alek Pinchuk <[email protected]> Authored-by: Tom Caputi <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #3625 Closes #6256
* OpenZFS 7531 - Assign correct flags to prefetched buffersbenrubson2017-11-111-0/+6
| | | | | | | | | | | Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Prakash Surya <[email protected]> Authored by: abraunegg <[email protected]> Approved by: Dan McDonald <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7531 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/468008cb
* Undo c89 workarounds to match with upstreamDon Brady2017-11-041-2/+1
| | | | | | | | | With PR 5756 the zfs module now supports c99 and the remaining past c89 workarounds can be undone. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #6816
* OpenZFS 640 - number_to_scaled_string is duplicated in several commandsJason King2017-10-301-1/+4
| | | | | | | | | | | | | | | | | | | Porting Notes: - The OpenZFS patch added nicenum_scale() and nicenum() to a library not used by ZFS. Rather than pull in a new dependency the version of nicenum in lib/libzpool/util.c was simply replaced with the new one. Reviewed by: Sebastian Wiedenroth <[email protected]> Reviewed by: Robert Mustacchi <[email protected]> Reviewed by: Yuri Pankov <[email protected]> Approved by: Dan McDonald <[email protected]> Authored by: Jason King <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/640 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0a055120 Closes #6796
* OpenZFS 8081 - Compiler warnings in zdbBrian Behlendorf2017-10-273-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Prakash Surya <[email protected]> Authored by: Alan Somers <[email protected]> Approved by: Richard Lowe <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
* OpenZFS 8558, 8602 - lwp_create() returns EAGAINBrian Behlendorf2017-10-262-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8558 lwp_create() returns EAGAIN on system with more than 80K ZFS filesystems On a system with more than 80K ZFS filesystems, we've seen cases where lwp_create() will start to fail by returning EAGAIN. The problem being, for each of those 80K ZFS filesystems, a taskq will be created for each dataset as part of the ZIL for each dataset. Porting Notes: - The new nomem taskq kstat was dropped. - Added module options and documentation for new tunings zfs_zil_clean_taskq_nthr_pct, zfs_zil_clean_taskq_minalloc, zfs_zil_clean_taskq_maxalloc, and zfs_sync_taskq_batch_pct. Reviewed by: George Wilson <[email protected]> Reviewed by: Sebastien Roy <[email protected]> Approved by: Robert Mustacchi <[email protected]> Authored by: Prakash Surya <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Chris Dunlop <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8558 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/216d772 8602 remove unused "dp_early_sync_tasks" field from "dsl_pool" structure Reviewed by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Robert Mustacchi <[email protected]> Authored by: Prakash Surya <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Chris Dunlop <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8602 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2bcb545 Closes #6779
* Added no_scrub_restart flag to zpool reopenArkadiusz Bubała2017-10-262-1/+4
| | | | | | | | | | | | | | | | | | | | | | | Added -n flag to zpool reopen that allows a running scrub operation to continue if there is a device with Dirty Time Log. By default if a component device has a DTL and zpool reopen is executed all running scan operations will be restarted. Added functional tests for `zpool reopen` Tests covers following scenarios: * `zpool reopen` without arguments, * `zpool reopen` with pool name as argument, * `zpool reopen` while scrubbing, * `zpool reopen -n` while scrubbing, * `zpool reopen -n` while resilvering, * `zpool reopen` with bad arguments. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tom Caputi <[email protected]> Signed-off-by: Arkadiusz Bubała <[email protected]> Closes #6076 Closes #6746
* Emit history events for 'zpool create'Brian Behlendorf2017-10-232-1/+3
| | | | | | | | | | | | | | | | | | | History commands and events were being suppressed for the 'zpool create' command since the history object did not yet exist. Create the object earlier so this history doesn't get lost. Split the pool_destroy event in to pool_destroy and pool_export so they may be distinguished. Updated events_001_pos and events_002_pos test cases. They now check for the expected history events and were reworked to be more reliable. Reviewed-by: Nathaniel Clark <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6712 Closes #6486
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 03:40:58 +0000