aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux
Commit message (Collapse)AuthorAgeFilesLines
* codebase style improvements for OpenZFS 6459 portGeorge Melikov2017-01-221-4/+8
|
* 4.10 compat - BIO flag changes and othersTim Chase2016-12-301-9/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Chunwei Chen <[email protected]> Signed-off-by: Tim Chase <[email protected]> Closes #5499
* Use cstyle -cpP in `make cstyle` checkBrian Behlendorf2016-12-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Håkan Johansson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #5465
* Use set_cached_acl and forget_cached_acl when possibleChunwei Chen2016-11-071-6/+6
| | | | | | | | | Originally, these two function are inline, so their usability is tied to posix_acl_release. However, since Linux 3.14, they became EXPORT_SYMBOL, so we can always use them. In this patch, we create an independent test for these two functions so we can use them when possible. Signed-off-by: Chunwei Chen <[email protected]>
* Batch free zpl_posix_acl_releaseChunwei Chen2016-11-071-8/+3
| | | | | | | | | | | | | | | | | | | | | | | Currently every calls to zpl_posix_acl_release will schedule a delayed task, and each delayed task will add a timer. This used to be fine except for possibly bad performance impact. However, in Linux 4.8, a new timer wheel implementation[1] is introduced. In this new implementation, the larger the delay, the less accuracy the timer is. So when we have a flood of timer from zpl_posix_acl_release, they will expire at the same time. Couple with the fact that task_expire will do linear search with lock held. This causes an extreme amount of contention inside interrupt and would actually lockup the system. We fix this by doing batch free to prevent a flood of delayed task. Every call to zpl_posix_acl_release will put the posix_acl to be freed on a lockless list. Every batch window, 1 sec, the zpl_posix_acl_free will fire up and free every posix_acl that passed the grace period on the list. This way, we only have one delayed task every second. [1] https://lwn.net/Articles/646950/ Signed-off-by: Chunwei Chen <[email protected]>
* Fix lookup_bdev() on UbuntuHajo Möller2016-10-261-4/+13
| | | | | | | | | | | | Ubuntu added support for checking inode permissions to lookup_bdev() in kernel commit 193fb6a2c94fab8eb8ce70a5da4d21c7d4023bee (merged in 4.4.0-6.21). Upstream bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1636517 This patch adds a test for Ubuntu's variant of lookup_bdev() to configure and calls the function in the correct way. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Hajo Möller <[email protected]> Closes #5336
* Linux 4.9 compat: inode_change_ok() renamed setattr_prepare()Brian Behlendorf2016-10-201-0/+11
| | | | | | | | | | | | In torvalds/linux@31051c8 the inode_change_ok() function was renamed setattr_prepare() and updated to take a dentry ratheri than an inode. Update the code to call the setattr_prepare() and add a wrapper function which call inode_change_ok() for older kernels. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Requires-spl: refs/pull/581/head
* Add parity generation/rebuild using 128-bits NEON for Aarch64Romain Dolbeau2016-10-032-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This re-use the framework established for SSE2, SSSE3 and AVX2. However, GCC is using FP registers on Aarch64, so unlike SSE/AVX2 we can't rely on the registers being left alone between ASM statements. So instead, the NEON code uses C variables and GCC extended ASM syntax. Note that since the kernel explicitly disable vector registers, they have to be locally re-enabled explicitly. As we use the variable's number to define the symbolic name, and GCC won't allow duplicate symbolic names, numbers have to be unique. Even when the code is not going to be used (e.g. the case for 4 registers when using the macro with only 2). Only the actually used variables should be declared, otherwise the build will fails in debug mode. This requires the replacement of the XOR(X,X) syntax by a new ZERO(X) macro, which does the same thing but without repeating the argument. And perhaps someday there will be a machine where there is a more efficient way to zero a register than XOR with itself. This affects scalar, SSE2, SSSE3 and AVX2 as they need the new macro. It's possible to write faster implementations (different scheduling, different unrolling, interleaving NEON and scalar, ...) for various cores, but this one has the advantage of fitting in the current state of the code, and thus is likely easier to review/check/merge. The only difference between aarch64-neon and aarch64-neonx2 is that aarch64-neonx2 unroll some functions some more. Reviewed-by: Gvozden Neskovic <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Romain Dolbeau <[email protected]> Closes #4801
* Linux compat: Grsecurity kernelGvozden Neskovic2016-08-222-1/+41
| | | | | | | | | | | API Change: Module parameter set/get methods take const parameter in Grsecurity kernel v4.7.1 Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Jason Zaman <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4997 Closes #5001
* Add support for AVX-512 family of instruction setsGvozden Neskovic2016-08-161-12/+233
| | | | | | | | | | | | | This patch adds compiler and runtime tests (user and kernel) for following instruction sets: avx512f, avx512cd, avx512er, avx512pf, avx512bw, avx512dq, avx512vl, avx512ifma, avx512vbmi. note: Linux support for AVX-512F (Foundation) instruction set started with linux v3.15 Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4952
* Reorder HAVE_BIO_RW_* checksBrian Behlendorf2016-08-121-4/+12
| | | | | | | | | | | | The HAVE_BIO_RW_* #ifdef's must appear before REQ_* #ifdef's in the bio_is_flush() and bio_is_discard() macros. Linux 2.6.32 era kernels defined both of values and the HAVE_BIO_RW_* must be used in this case. This resulted in a panic in zconfig test 5. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #4951 Closes #4959
* Use file_dentry and file_inode wrappersChen Haiquan2016-08-111-0/+12
| | | | | | | | | | | | Fix bugs due to kernel change in torvalds/linux@4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay"). This problem crashes system when use zfs as a layer of overlayfs. Signed-off-by: Chen Haiquan <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4914 Closes #4935
* Linux 4.8 compat: Fix removal of bio->bi_rw memberBrian Behlendorf2016-08-111-56/+109
| | | | | | | | | | | | | | | | | | All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #4951
* Linux 4.8 compat: posix_acl_valid()Brian Behlendorf2016-08-081-0/+12
| | | | | | | | | | | | | | The posix_acl_valid() function has been updated to require a user namespace. Filesystem callers should normally provide the user_ns from the super block associcated with the ACL; the zpl_posix_acl_valid() wrapper has been added for this purpose. See https://github.com/torvalds/linux/commit/0d4d717f for complete details. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #4922
* Retire HAVE_CURRENT_UMASK and HAVE_POSIX_ACL_CACHINGBrian Behlendorf2016-08-081-13/+0
| | | | | | | | | | Remove ZFS_AC_KERNEL_CURRENT_UMASK and ZFS_AC_KERNEL_POSIX_ACL_CACHING configure checks, all supported kernel provide this functionality. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #4922
* Linux 4.8 compat: new s_user_ns member of struct super_blockNikolay Borisov2016-08-081-0/+17
| | | | | | | | | | | | | Kernel 4.8 paved the way to enabling mounting a file system inside a non-init user namespace. To facilitate this a s_user_ns member was added holding the userns in which the filesystem's instance was mounted. This enables doing the uid/gid translation relative to this particular username space and not the default init_user_ns. Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4928
* Linux 4.8 compat: REQ_OP and bio_set_op_attrs()Chunwei Chen2016-07-291-5/+20
| | | | | | | | | | | | | | | | | | New REQ_OP_* definitions have been introduced to separate the WRITE, READ, and DISCARD operations from the flags. This included changing the encoding of bi_rw. It places REQ_OP_* in high order bits and other stuff in low order bits. This encoding is done through the new helper function bio_set_op_attrs. For complete details refer to: https://github.com/torvalds/linux/commit/f215082 https://github.com/torvalds/linux/commit/4e1b2d5 Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4892 Closes #4899
* Linux 4.8 compat: REQ_PREFLUSHBrian Behlendorf2016-07-291-0/+12
| | | | | | | | | | | | The REQ_FLUSH flag was renamed REQ_PREFLUSH to avoid confusion with REQ_OP_FLUSH. See https://github.com/torvalds/linux/commit/28a8f0d3 for complete details. Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4892 Issue #4899
* Check whether the kernel supports i_uid/gid_read/write helpersNikolay Borisov2016-07-251-0/+53
| | | | | | | | | | | | | Since the concept of a kuid and the need to translate from it to ordinary integer type was added in kernel version 3.5 implement necessary plumbing to be able to detect this condition during compile time. If the kernel doesn't support the kuid then just fall back to directly accessing the respective struct inode's members Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4685 Issue #227
* Linux 4.7 compat: handler->set() takes both dentry and inodeBrian Behlendorf2016-06-011-1/+15
| | | | | | | | | Counterpart to fd4c7b7, the same approach was taken to resolve the compatibility issue. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #4717 Issue #4665
* Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cacheChunwei Chen2016-05-201-0/+27
| | | | | | Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4665
* Linux 4.7 compat: handler->get() takes both dentry and inodeChunwei Chen2016-05-201-1/+14
| | | | | | Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4665
* Fix user namespaces uid/gid mappingBrian Behlendorf2016-04-301-4/+4
| | | | | | | | | | | As described in torvalds/linux@5f3a4a2 the &init_user_ns, and not the current user_ns, should be passed to posix_acl_from_xattr() and posix_acl_to_xattr(). Conveniently the init_user_ns is available through the init credential (kcred). Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Massimo Maggi <[email protected]> Closes #4177
* Support for vectorized algorithms on x86Gvozden Neskovic2016-03-212-1/+390
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is initial support for x86 vectorized implementations of ZFS parity and checksum algorithms. For the compilation phase, configure step checks if toolchain supports relevant instruction sets. Each implementation must ensure that the code is not passed to compiler if relevant instruction set is not supported. For this purpose, following new defines are provided if instruction set is supported: - HAVE_SSE, - HAVE_SSE2, - HAVE_SSE3, - HAVE_SSSE3, - HAVE_SSE4_1, - HAVE_SSE4_2, - HAVE_AVX, - HAVE_AVX2. For detecting if an instruction set can be used in runtime, following functions are provided in (include/linux/simd_x86.h): - zfs_sse_available() - zfs_sse2_available() - zfs_sse3_available() - zfs_ssse3_available() - zfs_sse4_1_available() - zfs_sse4_2_available() - zfs_avx_available() - zfs_avx2_available() - zfs_bmi1_available() - zfs_bmi2_available() These function should be called once, on module load, or initialization. They are safe to use from user and kernel space. If an implementation is using more than single instruction set, both compiler and runtime support for all relevant instruction sets should be checked. Kernel fpu methods: - kfpu_begin() - kfpu_end() Use __get_cpuid_max and __cpuid_count from <cpuid.h> Both gcc and clang have support for these. They also handle ebx register in case it is used for PIC code. Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #4381
* Linux 4.5 compat: xattr list handlerBrian Behlendorf2016-01-201-27/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The registered xattr .list handler was simplified in the 4.5 kernel to only perform a permission check. Given a dentry for the file it must return a boolean indicating if the name is visible. This differs slightly from the previous APIs which also required the function to copy the name in to the provided list and return its size. That is now all the responsibility of the caller. This should be straight forward change to make to ZoL since we've always required the caller to make the copy. However, this was slightly complicated by the need to support 3 older APIs. Yes, between 2.6.32 and 4.5 there are 4 versions of this interface! Therefore, while the functional change in this patch is small it includes significant cleanup to make the code understandable and maintainable. These changes include: - Improved configure checks for .list, .get, and .set interfaces. - Interfaces checked from newest to oldest. - Strict checking for each possible known interface. - Configure fails when no known interface is available. - HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency with similar iops and fops configure checks. - POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}. Compatibility wrapper were added for old kernels. - ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be a valid pointer, passing NULL for the 'list' and 'name' variables is allowed and must be checked for. All .list functions were updated to use the wrapper to aid readability. - zpl_xattr_filldir() updated to use the .list function for its permission check which is consistent with the updated Linux 4.5 interface. If a .list function is registered it should return 0 to indicate a name should be skipped, if there is no registered function the name will be added. - Additional documentation from xattr(7) describing the correct behavior for each namespace was added before the relevant handlers. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Issue #4228
* Use uio for zvol_{read,write}Chunwei Chen2015-12-151-0/+2
| | | | | | | | | Since uio now supports bvec, we can convert bio into uio and reuse dmu_{read,write}_uio. This way, we can remove some duplicate code. Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4078
* Linux 4.4 compat: xattr operations takes xattr_handlerChunwei Chen2015-12-011-0/+28
| | | | | | | | | | The xattr_hander->{list,get,set} were changed to take a xattr_handler, and handler_flags argument was removed and should be accessed by handler->flags. Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4021
* Linux 4.3 compat: bio_end_io_t / BIO_UPTODATELukas Wunner2015-09-251-12/+9
| | | | | | | | | | | | | | | | | | Commit torvalds/linux@4246a0b63bd8f56a1469b12eafeb875b1041a451 ("block: add a bi_error field to struct bio") dropped the error argument from bio_endio in favor of newly introduced bio->bi_error. This also replaces bio->bi_flags value BIO_UPTODATE. bio_endio was a 3 argument function until Linux 2.6.24, which made it a 2 argument function, and now the prototype has changed yet again to a 1 argument function. Support for pre 2.6.24 kernels was already dropped with 37f9dac592bf ("zvol processing should use struct bio") which assumed the 2 argument version in zvol_request(). Remaining code to support the 3 argument version is hereby removed. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Issue #3799
* Reintroduce IO accounting on zvols on Linux 3.19+Richard Yao2015-09-091-0/+5
| | | | | | | | | | | | | | zfsonlinux/zfs@e20cd6f7a8922709b1aa2ecefd783390102d79e0 caused us to lose IO accounting on zvols. When I originally wrote that last year, the symbols we needed to maintain IO accounting were GPL exported, but torvalds/linux@394ffa503bc40e32d7f54a9b817264e81ce131b4 provided suitable symbols for restoring this functionality 4 months later. We can call them to restore the IO accounting on Linux 3.19 and later as well as any older kernels where that patch is backported. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3741
* Remove blk_rq_bytes()/blk_rq_sectors autotools checksRichard Yao2015-09-041-23/+0
| | | | Signed-off-by: Richard Yao <[email protected]>
* Remove blk_rq_pos() autotools checkRichard Yao2015-09-041-8/+0
| | | | Signed-off-by: Richard Yao <[email protected]>
* Remove blk_fetch_request() autotools checkRichard Yao2015-09-041-14/+0
| | | | Signed-off-by: Richard Yao <[email protected]>
* Remove blk_requeue_request() autotools checkRichard Yao2015-09-041-8/+0
| | | | Signed-off-by: Richard Yao <[email protected]>
* Remove blk_end_request() autotools check.Richard Yao2015-09-041-74/+0
| | | | Signed-off-by: Richard Yao <[email protected]>
* Remove rq_is_sync() autotools checkRichard Yao2015-09-041-8/+0
| | | | Signed-off-by: Richard Yao <[email protected]>
* Remove rq_for_each_segment() autotools checkRichard Yao2015-09-041-42/+0
| | | | Signed-off-by: Richard Yao <[email protected]>
* zvol processing should use struct bioRichard Yao2015-09-041-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <[email protected]>
* VDEV_REQ_FUA should be mapped to REQ_FUARichard Yao2015-09-021-1/+1
| | | | | | | | | | | Pre-2.6.37 kernels support REQ_FUA in request flags, but not in BIO flags. zvols are the only consumer of VDEV_REQ_FUA and since they are passed requests, they should be obey the REQ_FUA flag like later kernels. This optimization will only matter on 2.6.36 and 2.6.37 because the zvol rework changes things to use bio, where we no longer are able to distinguish on earlier kernels Signed-off-by: Richard Yao <[email protected]>
* Remove blk_queue_io_opt() autotools checkRichard Yao2015-09-011-9/+0
| | | | | | | | This is needed for supporting kernels earlier than 2.6.30. Support for those kernels was dropped, so we can safely remove this check. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Remove blk_queue_physical_block_size() autotools checkRichard Yao2015-09-011-10/+0
| | | | | | | | This is needed for supporting kernels earlier than 2.6.30. Support for those kernels was dropped, so we can safely remove this check. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Linux 3.18 compat: Snapshot auto-mountingBrian Behlendorf2015-08-311-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-factor the .zfs/snapshot auto-mouting code to take in to account changes made to the upstream kernels. And to lay the groundwork for enabling access to .zfs snapshots via NFS clients. This patch makes the following core improvements. * All actively auto-mounted snapshots are now tracked in two global trees which are indexed by snapshot name and objset id respectively. This allows for fast lookups of any auto-mounted snapshot regardless without needing access to the parent dataset. * Snapshot entries are added to the tree in zfsctl_snapshot_mount(). However, they are now removed from the tree in the context of the unmount process. This eliminates the need complicated error logic in zfsctl_snapshot_unmount() to handle unmount failures. * References are now taken on the snapshot entries in the tree to ensure they always remain valid while a task is outstanding. * The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right after the auto-mount succeeds. This allows to kernel to unmount idle auto-mounted snapshots if needed removing the need for the zfsctl_unmount_snapshots() function. * Snapshots in active use will not be automatically unmounted. As long as at least one dentry is revalidated every zfs_expire_snapshot/2 seconds the auto-unmount expiration timer will be extended. * Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS to be immediately unmounted when the dentry was revalidated. This was a consequence of ZFS invaliding all snapdir dentries to ensure that negative dentries didn't mask new snapshots. This patch modifies the behavior such that only negative dentries are invalidated. This solves the issue and may result in a performance improvement. Signed-off-by: Brian Behlendorf <[email protected]> Closes #3589 Closes #3344 Closes #3295 Closes #3257 Closes #3243 Closes #3030 Closes #2841
* Add compatibility layer for {kmap,kunmap}_atomicChunwei Chen2015-08-242-1/+42
| | | | | | | | | Starting from linux-2.6.37, {kmap,kunmap}_atomic takes 1 argument instead of 2. We use zfs_{kmap,kunmap}_atomic as wrappers and always take 2 argument, but ignore the 2nd for newer kernel. Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Linux 4.2 compat: bdi_setup_and_register()Brian Behlendorf2015-07-171-0/+1
| | | | | | | | | | | The vfs_compat.h header should include the linux/backing-dev.h header because it depends on the bdi_* functions defined there. In previous kernels this header was being indirectly included which prevented a build failure. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #3596
* Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 supportTim Chase2015-05-111-10/+5
| | | | | | | | | | | | | | | | | Commit f4af6bb783b0b7f2a6075cb1c74c225db8a157b2 which added support for REQ_FAILFAST_MASK but the new autoconf test didn't use the same preprocessor macro name as the code did. The effect is that FAILFAST mode has not been enabled for ZoL in any post-2.6.35 kernel. Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels. Raise an error condition if the FAILFAST interface can't be detected. Signed-off-by: Tim Chase <[email protected] Signed-off-by: Brian Behlendorf <[email protected]> Closes #3386
* Linux 4.0 compat: bdi_setup_and_register()Brian Behlendorf2015-03-031-10/+20
| | | | | | | | | | | | | | | | | | | | The 'capabilities' argument which was passed to bdi_setup_and_register() has been removed. File systems should no longer pass BDI_CAP_MAP_COPY. For our purposes this means there are now three different interfaces which must be handled. A zpl_bdi_setup_and_register() wrapper function has been introduced to provide a single interface to the ZPL code. * 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported. * 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments. * 4.0 - x.y, bdi_setup_and_register() takes 2 arguments. I've also taken this opportunity to remove HAVE_BDI because kernels older then 2.6.32 are no longer supported. All kernels newer than this will have one of the above interfaces. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #3128
* Linux 3.19 compat: file_inode was addedJörg Thalheim2015-02-101-0/+13
| | | | | | | | | struct access f->f_dentry->d_inode was replaced by accessor function file_inode(f) Signed-off-by: Joerg Thalheim <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3084
* Kernel header installation should respect --prefixRichard Yao2014-10-281-1/+1
| | | | | | | | | | This is the upstream component of work that enables preliminary support for building Gentoo's ZFS packaging on other Linux systems via Gentoo Prefix. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #2641
* Update utsname supportBrian Behlendorf2014-10-172-1/+31
| | | | | | | | | | | | | | | | | | Modify the code to use the utsname() kernel function rather than a global variable. This results is cleaner more portable code because utsname() is already provided by the kernel and can be easily emulated in user space via uname(2). This means that it will behave consistently in both contexts. This is also has the benefit that it allows the removal of a few _KERNEL pre-processor conditions. And it also is a pre-requisite for a proper FUSE port because we need to provide a valid utsname. Finally, it allows us to remove this functionality from the SPL and all the related compatibility code. Signed-off-by: Brian Behlendorf <[email protected]> Issue #2757
* Include sys/taskq.h in linux/vfs_compat.hRichard Yao2014-08-141-0/+2
| | | | | | | | | | | | We should have included sys/taskq.h directly because we use the taskq code here, but we instead had files that included sys/taskq.h also include sys/kmem.h, which happened to include sys/taskq.h. sys/kmem.h no longer does this, so we must define the include as we should have done in the first place. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2411
* Allow building without ACLsChris Wedgwood2014-05-301-15/+15
| | | | | | | | | | Some kernel definitions were buried inside the #if... #endif logic for ACLs. When ACLs are not available these definitions get lost causing the build to fail. Signed-off-by: Chris Wedgwood <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2349
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 14:38:06 +0000