summaryrefslogtreecommitdiffstats
path: root/etc
Commit message (Collapse)AuthorAgeFilesLines
* Move dracut specifics to dracut moduleMichael Niewöhner2019-04-022-2/+0
| | | | | | | | | | | | Dracut depends on the environment variable BOOTFS to be set after pool import. This dracut specific systemd ExecStartPost command should not be called for any non-dracut systems, so let's move it to a static systemd unit that. Reviewed-by: Manuel Amador (Rudd-O) <[email protected]> Reviewed-by: Matthew Thode <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Michael Niewöhner <[email protected]> Closes #8510
* Fix systemd-import servicesMichael Niewöhner2019-03-292-2/+2
| | | | | | | | | | | | | | | | On debian, systemd complains about missing /bin/awk because it actually is located at /usr/bin/awk. It is not a good idea to hardcode binary paths because different linux distros use different paths. According to systemd's man page it is absolutely safe to miss paths for binaries located at standard locations (/bin, /sbin, /usr/bin, ...). Further, replace this more or less complicated awk command by grep. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Michael Niewöhner <[email protected]> Issue #8510
* Remove hard dependency on bashMichael Niewöhner2019-03-292-2/+2
| | | | | | | | | | zfs-import-* services have a hard dependency on bash while not everyone has bash installed. At this point /bin/sh is sufficient, so use that. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Michael Niewöhner <[email protected]> Issue #8510
* zfs-import: should be before swapHenrik Riomar2019-03-141-0/+1
| | | | | | | | zfs-import must be done before swap in order for swap on zvol to work Reviewed-by: Kash Pande <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Henrik Riomar <[email protected]> Closes #8502
* Remove zfs-zed hard dep from zfs-share init scriptberen122019-02-281-2/+2
| | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: bunder2015 <[email protected]> Signed-off-by: Chris Zubrzycki <[email protected]> Closes #8447
* ZFS mounted NFSv3 shares fail lock reclaimsDon Brady2019-02-151-0/+1
| | | | | | | | | | ZFS NFS shares mounted on a client with NFSv3 and with open locks will fail to reclaim those locks after a server reboot. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #8398
* Add enclosure_symlinks option to vdev_idTony Hutter2018-12-141-0/+3
| | | | | | | | | | | | | | | | Add an 'enclosure_symlinks' option to vdev_id.conf. This creates consistently named symlinks to the enclosure devices (/dev/sg*) based off the configuration in vdev_id.conf. The enclosure symlinks show up in /dev/by-enclosure/<prefix>-<channel><num>. The links make it make it easy to run sg_ses on a particular enclosure device. The enclosure links are created in addition to the normal /dev/disk/by-vdev links. 'enclosure_symlinks' is only valid in sas_direct configurations. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Simon Guest <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #8194
* zfs-functions.in: is_mounted() always returns 1TerraTech2018-12-041-2/+7
| | | | | | | | | | | | | | The 'while read line; ...; done' loop is run in a piped subshell therefore the 'return 0' would not cause a return from the is_mounted() function. In all cases, this function will always return 1. The fix is to 'return 1' from the subshell on a successful match (no match == return 0), and then negating the final return value. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: TerraTech <[email protected]> Closes #8151
* Minor documentation, logging, and testing typosAntonio Russo2018-06-071-9/+9
| | | | | | | | | This patch collects some minor inconsistencies and typos in the documentation, logging and testing infrastructure. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #7608
* Add canonical mount options zfs-mount-generatorAntonio Russo2018-05-111-14/+99
| | | | | | | | | | | | | | | | | | lib/libzfs/libzfs_mount.c:zfs_add_options provides the canonical mount options used by a `zfs mount` command. Because we cannot call `zfs mount` directly from a systemd.mount unit, we mirror that logic in zfs-mount-generator. The zed script is updated to cache these properties as well. Include a mini-tutorial in the manual page, properly substitute configuration paths in zfs-mount-generator.8.in, and standardize the Makefile. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Richard Laager <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #7453
* systemd mount generator and tracking ZEDLETAntonio Russo2018-04-064-1/+132
| | | | | | | | | | | | | | | | | | | | | | | | zfs-mount-generator implements the "systemd generator" protocol, producing systemd.mount units from the cached outputs of zfs list, during early boot, integrating with systemd. Each pool has an indpendent cache of the command zfs list -H -oname,mountpoint,canmount -tfilesystem -r $pool which is kept synchronized by the ZEDLET history_event-zfs-list-cacher.sh Datasets not in the cache will be loaded later in the boot process by zfs-mount.service, including pools without a cache. Among other things, this allows for complex mount hierarchies. Reviewed-by: Fabian Grünbichler <[email protected]> Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #7329
* zfs-functions: skip lines where mntpnt is 'none'Georgy Yakovlev2018-03-301-0/+2
| | | | | | | | | | | | | | This fixes zfs-mount initscript trying to mount swap volumes as filesystems or anything that has 'none' as a mountpoint in /etc/fstab. Additionally, fixes trying to mount swap volumes as a filesystem on RHEL. RHEL defines mountpoint for swap as `swap`. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Georgy Yakovlev <[email protected]> Closes #7346 Closes #7347
* chmod -x on etc/init.d/zfs-*.in automake filesTony Hutter2018-03-284-0/+0
| | | | | | | | | | | | Clear executable bit on zfs-import.in, zfs-mount.in, zfs-share.in, and zfs-zed.in. These are automake files and should not be marked executable. This fixes a RPM build error on Fedora 28. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #7355 Closes #7327
* Add kernel module auto-loadingBrian Behlendorf2018-03-134-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically a dynamic misc minor number was registered for the /dev/zfs device in order to prevent minor number collisions. This was fine but it prevented us from being able to use the kernel module auto-loaded which requires a known reserved value. Resolve this issue by adding a configure test to find an available misc minor number which can then be used in MODULE_ALIAS_MISCDEV at build time. By adding this alias the zfs kmod is added to the list of known static-nodes and the systemd-tmpfiles-setup-dev service will create a /dev/zfs character device at boot time. This in turn allows us to update the 90-zfs.rules file to make it aware this is a static node. The upshot of this is that whenever a process (zpool, zfs, zed) opens the /dev/zfs the kmods will be automatic loaded. This even works for unprivileged users so there is no longer a need to manually load the modules at boot time. As an additional bonus the zed now no longer needs to start after the zfs-import.service since it will trigger the module load. In the unlikely event the minor number we selected conflicts with another out of tree unregistered minor number the code falls back to dynamically allocating it. In this case the modules again must be manually loaded. Note that due to the change in the method of registering the minor number the zimport.sh test case may incorrectly fail when the static node for the installed packages is created instead of the dynamic one. This issue will only transiently impact zimport.sh for this single commit when we transition and are mixing and matching methods. Reviewed-by: Fabian Grünbichler <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> TEST_ZIMPORT_SKIP="yes" Closes #7287
* Allow modprobe to fail when called within systemdMatthew Thode2018-02-212-2/+2
| | | | | | | | | | This allows for systems with zfs built into the kernel manually to run these services. Otherwise the service will fail to start. Reviewed-by: loli10K <[email protected]> Reviewed-by: Kash Pande <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Thode <[email protected]> Closes #7174
* OpenZFS 7431 - ZFS Channel ProgramsChris Williamson2018-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported-by: Don Brady <[email protected]> Ported-by: John Kennedy <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7431 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533 Porting Notes: * The CLI long option arguments for '-t' and '-m' don't parse on linux * Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc * Lua implementation is built as its own module (zlua.ko) * Lua headers consumed directly by zfs code moved to 'include/sys/lua/' * There is no native setjmp/longjump available in stock Linux kernel. Brought over implementations from illumos and FreeBSD * The get_temporary_prop() was adapted due to VFS platform differences * Use of inline functions in lua parser to reduce stack usage per C call * Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
* remove pools without a bootfs from BOOTFS variableMatthew Thode2018-01-302-2/+2
| | | | | | | | Use the same method used in zfs-load-key. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Llewelyn Trahaearn <[email protected]> Signed-off-by: Matthew Thode <[email protected]> Closes #7089
* Run zfs load-key if needed in dracutMatthew Thode2018-01-182-0/+2
| | | | | | | | | | | | | | | | 'zfs load-key -a' will only be called if needed. If a dataset not needed for boot does not have its key loaded (home directories for example) boot can still continue. zfs:AUTO was not working via dracut, so we still need the generator script to do its thing. Reviewed-by: Richard Yao <[email protected]> Reviewed-by: Manuel Amador (Rudd-O) <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: loli10K <[email protected]> Signed-off-by: Matthew Thode <[email protected]> Closes #6982 Closes #7004
* Cleanup systemd dependenciesAntonio Russo2017-11-087-7/+4
| | | | | | | | | | Some redundancy is present in the systemd dependencies, as noticed in PR#6764. Existing setups might rely on these quirks, so these cleanups have been moved to the development branch. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #6822
* systemd zfs-import.target and documentationAntonio Russo2017-10-305-6/+13
| | | | | | | | | | | | | | | | | zfs-import-{cache,scan}.service must complete before any mounting of filesystems can occur. To simplify this dependency, create a target that is reached After (in the systemd sense) the pool is imported. Additionally, recommend that legacy zfs mounts use the option x-systemd.requires=zfs-import.target to codify this requirement. Reviewed-by: Fabian Grünbichler <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #6764
* vdev_id: extension for new scsi topologySimon Guest2017-09-272-1/+11
| | | | | | | | | | On systems with SCSI rather than SAS disk topology, this change enables the vdev_id script to match against the block device path, and therefore create a vdev alias in /dev/disk/by-vdev. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Simon Guest <[email protected]> Closes #6592
* Add man page reference to systemd unitsFabian-Gruenbichler2017-09-054-0/+4
| | | | | | | Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Fabian Grünbichler <[email protected]> Closes #6599
* Disable mount(8) canonical paths in do_mount()LOLi2017-08-211-1/+0
| | | | | | | | | | | | | | | By default the mount(8) command, as invoked by 'zfs mount', will try to resolve any path parameter in its canonical form: this could lead to mount failures when the cwd contains a symlink having the same name of the dataset being mounted. Fix this by explicitly disabling mount(8) path canonicalization. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #1791 Closes #6429 Closes #6437
* Use /sbin/openrc-run for openrc init scriptsBtbN2017-08-161-1/+1
| | | | | | | | Using /sbin/runscript is deprecated and throws a QA warning when still used in init scripts. Reviewed-by: bunder2015 <[email protected]> Signed-off-by: BtbN <[email protected]> Closes #6519
* zpool iostat/status -c improvementsGiuseppe Di Natale2017-06-053-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Users can now provide their own scripts to be run with 'zpool iostat/status -c'. User scripts should be placed in ~/.zpool.d to be included in zpool's default search path. Provide a script which can be used with 'zpool iostat|status -c' that will return the type of device (hdd, sdd, file). Provide a script to get various values from smartctl when using 'zpool iostat/status -c'. Allow users to define the ZPOOL_SCRIPTS_PATH environment variable which can be used to override the default 'zpool iostat/status -c' search path. Allow the ZPOOL_SCRIPTS_ENABLED environment variable to enable or disable 'zpool status/iostat -c' functionality. Use the new smart script to provide the serial command. Install /etc/sudoers.d/zfs file which contains the sudoer rule for smartctl as a sample. Allow 'zpool iostat/status -c' tests to run in tree. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Giuseppe Di Natale <[email protected]> Closes #6121 Closes #6153
* OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_spaceBrian Behlendorf2017-03-071-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewed by: Steve Gonczi <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Ported-by: Brian Behlendorf <[email protected]> Background information: This assertion about tx_space_* verifies that we are not dirtying more stuff than we thought we would. We “need” to know how much we will dirty so that we can check if we should fail this transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() — typically less than a millisecond), we call dbuf_dirty() on the exact blocks that will be modified. Once this happens, the temporary accounting in tx_space_* is unnecessary, because we know exactly what blocks are newly dirtied; we call dnode_willuse_space() to track this more exact accounting. The fundamental problem causing this bug is that dmu_tx_hold_*() relies on the current state in the DMU (e.g. dn_nlevels) to predict how much will be dirtied by this transaction, but this state can change before we actually perform the transaction (i.e. call dbuf_dirty()). This bug will be fixed by removing the assertion that the tx_space_* accounting is perfectly accurate (i.e. we never dirty more than was predicted by dmu_tx_hold_*()). By removing the requirement that this accounting be perfectly accurate, we can also vastly simplify it, e.g. removing most of the logic in dmu_tx_count_*(). The new tx space accounting will be very approximate, and may be more or less than what is actually dirtied. It will still be used to determine if this transaction will put us over quota. Transactions that are marked by dmu_tx_mark_netfree() will be excepted from this check. We won’t make an attempt to determine how much space will be freed by the transaction — this was rarely accurate enough to determine if a transaction should be permitted when we are over quota, which is why dmu_tx_mark_netfree() was introduced in 2014. We also won’t attempt to give “credit” when overwriting existing blocks, if those blocks may be freed. This allows us to remove the do_free_accounting logic in dbuf_dirty(), and associated routines. This logic attempted to predict what will be on disk when this txg syncs, to know if the overwritten block will be freed (i.e. exists, and has no snapshots). OpenZFS-issue: https://www.illumos.org/issues/7793 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a Upstream bugs: DLPX-32883a Closes #5804 Porting notes: - DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(), Using the default dnode size would be slightly better. - DEBUG_DMU_TX wrappers and configure option removed. - Resolved _by_dnode() conflicts these changes have not yet been applied to OpenZFS.
* Fix zfs-mount.service failure on bootBrian Behlendorf2017-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | The mount(8) command will helpfully try to resolve any device name which is passed in. It does this by applying some simple heuristics before passing it along to the registered mount helper. Normally this fine. However, one of these heuristics is to prepend the current working directory to the passed device name. If that resulting directory name exists mount(8) will perform the mount(2) system call and never invoke the helper utility. Since the cwd for systemd when running as the system instance is the root directory the default mount points created by zfs(8) can cause a mount failure. This change avoids the issue by explicitly setting the cwd to a different path when performing the mount. Signed-off-by: Brian Behlendorf <[email protected]> Closes #5719
* Fix zfs-share systemd unit fileLOLi2017-01-131-1/+1
| | | | | | | | Use the system /bin directory rather than the package install @bindir@. This allows --prefix=/usr/local to work as intended. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #5559
* Fix spellingka72017-01-032-5/+5
| | | | | | | | | Reviewed-by: Brian Behlendorf <[email protected] Reviewed-by: Giuseppe Di Natale <[email protected]>> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Haakan T Johansson <[email protected]> Closes #5547 Closes #5543
* Change /etc/mtab to /proc/self/mountsslashdd2016-09-202-3/+3
| | | | | | | | | | | Fix misleading error message: "The /dev/zfs device is missing and must be created.", if /etc/mtab is missing. Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Eric Desrochers <[email protected]> Closes #4680 Closes #5029
* Set proper dependency for string replacement targetsChunwei Chen2016-08-023-13/+6
| | | | | | | | | A lot of string replacement target don't have dependency or incorrect dependency. We setup proper dependency by pattern rules. Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4908
* Systemd configuration fixesBrian Behlendorf2016-05-278-11/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Disable zfs-import-scan.service by default. This ensures that pools will not be automatically imported unless they appear in the cache file. When this service is explicitly enabled pools will be imported with the "cachefile=none" property set. This prevents the creation of, or update to, an existing cache file. $ systemctl list-unit-files | grep zfs zfs-import-cache.service enabled zfs-import-scan.service disabled zfs-mount.service enabled zfs-share.service enabled zfs-zed.service enabled zfs.target enabled * Change services to dynamic from static by adding an [Install] section and adding 'WantedBy' tags in favor of 'Requires' tags. This allows for easier customization of the boot behavior. * Start the zfs-import-cache.service after the root pivot so the cache file is available in the standard location. * Start the zfs-mount.service after the systemd-remount-fs.service to ensure the root fs is writeable and the ZFS filesystems can create their mount points. * Change the default behavior to only load the ZFS kernel modules in zfs-import-*.service or when blkid(8) detects a pool. Users who wish to unconditionally load the kernel modules must uncomment the list of modules in /lib/modules-load.d/zfs.conf. Reviewed-by: Richard Laager <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4325 Closes #4496 Closes #4658 Closes #4699
* A collection of dracut fixesManuel Amador (Rudd-O)2016-05-122-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | - In older systems without sysroot.mount, import before dracut-mount, and re-enable old dracut mount hook - rootflags MUST be present even if the administrator neglected to specify it explicitly - Check that mount.zfs exists in sbindir - Remove awk and head as (now unused) requirements, add grep, and install the right mount.zfs - Eliminate one use of grep in Dracut - Use a more accurate grepping statement to identify zfsutil in rootflags - Ensure that pooldev is nonempty - Properly handle /dev/sd* devices and more - Use new -P to get list of zpool devices - Bail out of the generator when zfs:AUTO is on the root command line - Ignore errors from systemctl trying to load sysroot.mount, we only care about the output - Determine which one is the correct initqueuedir at run time. - Add a compatibility getargbool for our detection / setup script. - Update dracut .gitignore files Signed-off-by: <Matthew Thode [email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4558 Closes #4562
* Add support for alpine linuxCarlo Landmeter2016-03-085-5/+5
| | | | | | | | | Both Alpine Linux and Gentoo use OpenRC so we share its logic Signed-off-by: Carlo Landmeter <[email protected]> Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4386
* Add nfs-kernel-server for DebianGrischa Zengel2016-02-251-2/+2
| | | | | | | | | | Debian based systems use nfs-kernel-server as the service name. List both nfs-server.service and nfs-kernel-server.service so this service will work on multiple distributions. Signed-off-by: Grischa Zengel <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4350
* zfs-import: Perform verbatim import using cache fileJames Lee2015-10-132-64/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change modifies the import service to use the default cache file to perform a verbatim import of pools at boot. This fixes code that searches all devices and imported all visible pools. Using the cache file is in keeping with the way ZFS has always worked, how Solaris, Illumos, FreeBSD, and systemd performs imports, and is how it is written in the man page (zpool(1M,8)): All pools in this cache are automatically imported when the system boots. Importantly, the cache contains important information for importing multipath devices, and helps control which pools get imported in more dynamic environments like SANs, which may have thousands of visible and constantly changing pools, which the ZFS_POOL_EXCEPTIONS variable is not equipped to handle. Verbatim imports prevent rogue pools from being automatically imported and mounted where they shouldn't be. The change also stops the service from exporting pools at shutdown. Exporting pools is only meant to be performed explicitly by the administrator of the system. The old behavior of searching and importing all visible pools is preserved and can be switched on by heeding the warning and toggling the ZPOOL_IMPORT_ALL_VISIBLE variable in /etc/default/zfs. Signed-off-by: James Lee <[email protected]> Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3777 Closes #3526
* Rename 'zed.service' to 'zfs-zed.service'Turbo Fredriksson2015-10-023-3/+6
| | | | | | | | | | | | | | | For consistency all systemd unit files and init scripts now share the same names. This prevents an issue where the zed is started twice on systems where both the systemd and sysv infrastructure is installed concurrently. For backward compatibility a 'zed' alias has been added. This allows the user to interact with the service using either the name 'zed' or 'zfs-zed'. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #3837
* Init script fixesTurbo Fredriksson2015-09-296-49/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Fix regression - "OVERLAY_MOUNTS" should have been "DO_OVERLAY_MOUNTS". * Fix update-rc.d commands in postinst. Thanx to subzero79@GitHub. * Fix make sure a filesystem exists before trying to mount in mount_fs() * Fix local variable usage. * Fix to read_mtab(): * Strip control characters (space - \040) from /proc/mounts GLOBALY, not just first occurrence. * Don't replace unprintable characters ([/-. ]) for use in the variable name with underscore. No need, just remove them all together. * Add check_boolean() to check if a user configure option is set ('yes', 'Yes', 'YES' or any combination there of) OR '1'. Anything else is considered 'unset'. * Add a ZFS_POOL_IMPORT to the default config. * This is a semi colon separated list of pools to import ONLY. * This is intended for systems which have _a lot_ of pools (from a SAN for example) and it would be to many to put in the ZFS_POOL_EXCEPTIONS variable.. * Add a config option "ZPOOL_IMPORT_OPTS" for adding additional options to "zpool import". * Add documentation and the chance of overriding the ZPOOL_CACHE variable in the config file. * Remove "sort" from find_pools() and setup_snapshot_booting(). Sometimes not available, and not really necessary. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Ned Bass <[email protected]> Issue #3816
* Fixed --signal typoyuina8222015-09-221-1/+1
| | | | | | Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #3773
* Add extra_started_commands because reload function is not defaultyuina8222015-09-221-0/+2
| | | | | | Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #3773
* Force create /run/sendsigs.omit.d link when starting zedSenH2015-09-081-1/+1
| | | | | | | | | | | | | | Resolve the following error when restarting the zed by force creating the /run/sendsigs.omit.d/zed link. sudo /etc/init.d/zfs-zed restart * Stopping ZFS Event Daemon [ OK ] * Starting ZFS Event Daemon ln: failed to create symbolic link `/run/sendsigs.omit.d/zed': File exists Signed-off-by: SenH <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3747
* Reorder zfs-* services to allow /var on separate datasetJames Lee2015-09-025-46/+45
| | | | | | | | | | | | | | | | | | | | | | | | | ZED depends on /var. When /var is a separate dataset, it must be mounted before starting ZED. This change moves the zfs-zed service from starting first, to starting after zfs-mount, but before zfs-share. As discussed in issue #3513, ZED does not need to start first in order to consume events made during the zfs-import and zfs-mount services. The events will be queued and can be handled later in the boot process. ZED may, however, handle sharing in the future, so it should be started before the zfs-share service. This commit also stops the zfs-import service from writing temp files to /var/tmp on shutdown and it corrects the return code for the OpenRC service. Other OpenRC-specific changes noted in issue #3513 were reitereated in issue #3715 and committed in da619f3. Signed-off-by: James Lee <[email protected]> Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3513
* Some OpenRC dependency logic belongs in mountRichard Yao2015-08-302-10/+12
| | | | | | | | | The dependencies for handling / on ZFS belong in the mount script, not the zed script. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3715
* Fix some minor issues with the SYSV init and initramfs scripts.Turbo Fredriksson2015-07-245-14/+18
| | | | | | | | | | | | | | | | | | | | | This is some minor fixes to commits 2cac7f5f11756663525a5d4604d9f0a3202d4024 and 2a34db1bdbcecf5019c4a59f2a44c92fe82010f2. * Make sure to alien'ate the new initramfs rpm package as well! The rpm package is build correctly, but alien isn't run on it to create the deb. * Before copying file from COPY_FILE_LIST, make sure the DESTDIR/dir exists. * Include /lib/udev/vdev_id file in the initrd. * Because the initrd needs to use '/sbin/modprobe' instead of 'modprobe', we need to use this in load_module() as well. * Make sure that load_module() can be used more globaly, instead of calling '/sbin/modprobe' all over the place. * Make sure that check_module_loaded() have a parameter - module to check. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3626
* Support parallel build trees (VPATH builds)Turbo Fredriksson2015-07-173-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #1082
* Add /dev/mapper to the list of possible sources for pool devices.Turbo Fredriksson2015-06-291-0/+9
| | | | | | | | This is especially needed when using LUKS backed pools. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3536
* Additional SYSV init script fixes (3).Turbo Fredriksson2015-06-252-54/+22
| | | | | | | | | | | | | | | | | | * In read_mtab(), fix problems (!?) in the mounts file. It will record 'rpool 1' as 'rpool\0401' instead of 'rpool\00401' which seems to be the correct (at least as far as 'printf' is concerned). Use this using the external 'echo' command (and not the one built in to the shell) because the internal one would interpret the backslash code (incorrectly), giving us a  instead. * Remove reregister_mounts() - no longer needed. * For Gentoo, the zfs_log_failure_msg() should use eend(), not eerror() (which requires an error message, which we don't have). Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3488 Closes #3509 Closes #3514
* Revert "Additional SYSV init script fixes."Turbo Fredriksson2015-06-251-10/+7
| | | | | | | | | | | This reverts commit 036391c980c1e6504352b770eb385806a951b1cb. Because #3509 came just after this commit was accepted and is related to the original problem the commit was supposed to fix, we need to solve the problem in another way. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Additional SYSV init script fixes.Turbo Fredriksson2015-06-171-7/+10
| | | | | | | | | | | | | | | | | | | | Use the 'mount' command instead of /proc/mounts to get a list of matching filesystems. This because /proc/mounts reports a pool with a space 'rpool 1' as 'rpool\0401'. The space is encoded as 3-digit octal which is legal. However 'printf "%b"', which we use to filter out other illegal characters (such as slash, space etc) can't properly interpret this because it expects 4-digit octal. We get a  instead of the space we expected. The correct value should have been 'rpool\00401' (note the additional leading zero). So use 'mount', which interprets all backslash-escapes correctly, instead. Signed-off-by: Turbo Fredriksson [email protected] Signed-off-by: Brian Behlendorf <[email protected]> Closes #3488
* SYSV init script fixes.Turbo Fredriksson2015-06-054-17/+35
| | | | | | | | | | | | | | | | | | | | | * Change the order of the function library check/load. Redhat based system _can_ have a /lib/lsb/init-functions file (from the redhat-lsb-core package), but it's only partially what we can use. Instead, look for that file last, giving the script a chance to catch the 'real' distribution file. * Filter out dashes and dots in dataset name in read_mtab(). * Get rid of 'awk' entirely. This is usually in /usr, which might not be availible. * Get rid of the 'find /dev/disk/by-*' (find is on /usr, which might not be availible). Instead use echo in a for loop. * Rebuild scripts if any of the *.in files changed. * Move the sed part that filters out duplicates inside the check fo valid variable. Signed-off-by: Turbo Fredriksson [email protected] Signed-off-by: Brian Behlendorf <[email protected]> Closes #3463 Closes #3457
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 17:11:04 +0000