summaryrefslogtreecommitdiffstats
path: root/configure.ac
Commit message (Collapse)AuthorAgeFilesLines
* Add -c to zpool iostat & status to run commandTony Hutter2016-11-291-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a command (-c) option to zpool status and zpool iostat. The -c option allows you to run an arbitrary command on each vdev and display the first line of output in zpool status/iostat. The environment vars VDEV_PATH and VDEV_UPATH are set to the vdev's path and "underlying path" before running the command. For device mapper, multipath, or partitioned vdevs, VDEV_UPATH is the actual underlying /dev/sd* disk. This can be useful if the command you're running requires a /dev/sd* device. The patch also uses /sys/block/<dev>/slaves/ to lookup the underlying device instead of using libdevmapper. This not only removes the libdevmapper requirement at build time, but also allows you to resolve device mapper devices without being root. This means that UDEV_UPATH get set correctly when running zpool status/iostat as an unprivileged user. Example: $ zpool status -c 'echo I am $VDEV_PATH, $VDEV_UPATH' NAME STATE READ WRITE CKSUM mypool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 mpatha ONLINE 0 0 0 I am /dev/mapper/mpatha, /dev/sdc sdb ONLINE 0 0 0 I am /dev/sdb1, /dev/sdb Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #5368
* Add support for O_TMPFILEChunwei Chen2016-11-041-0/+1
| | | | | | | | | | | | | | | Linux 3.11 add O_TMPFILE to open(2), which allow creating an unlinked file on supported filesystem. It's basically doing open(2) and unlink(2) atomically. The filesystem support is added through i_op->tmpfile. We basically copy the create operation except we get rid of the link and name related stuff and add the new node to unlinked set. We also add support for linkat(2) to link tmpfile. However, since all previous file operation will skip ZIL, we force a txg_wait_synced to make sure we are sync safe. Signed-off-by: Chunwei Chen <[email protected]>
* Fix statechange-led.sh & unnecessary libdevmapper warningTony Hutter2016-10-251-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix autoreplace behaviour on statechange-led.sh script. ZED sends the following events on an auto-replace: 1. statechange: Disk goes UNAVAIL->ONLINE 2. statechange: Disk goes ONLINE->UNAVAIL 3. vdev_attach: Disk goes ONLINE Events 1-2 happen when ZED first attempts to do an auto-online. When that fails, ZED then tries an auto-replace, generating the vdev_attach event in #3. In the previous code, statechange-led was only looking at the UNAVAIL->ONLINE transition to turn off the LED. It ignored the #2 ONLINE->UNAVAIL transition, assuming it was just the "old" VDEV going offline. This is problematic, as a drive can go from ONLINE->UNAVAIL when it's malfunctioning, and we don't want to ignore that. This new patch correctly turns on the fault LED every time a drive becomes UNAVAIL. It also monitors vdev_attach events to trigger turning off the LED when an auto-replaced disk comes online. - Remove unnecessary libdevmapper warning with --with-config=kernel This fixes an unnecessary libdevmapper warning when building --with-config=kernel. Kernel code does not use libdevmapper, so the warning is not needed. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #2375 Closes #5312 Closes #5331
* Multipath autoreplace, control enclosure LEDs, event rate limitingTony Hutter2016-10-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | 1. Enable multipath autoreplace support for FMA. This extends FMA autoreplace to work with multipath disks. This requires libdevmapper to be installed at build time. 2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must be supported by the Linux SES driver for this to work. The enclosure LED scripts work for multipath devices as well. The scripts will clear the LED when the fault is cleared. 3. Rate limit ZIO delay and checksum events so as not to flood ZED ZIO delay and checksum events are rate limited to 5/sec in the zfs module. Reviewed-by: Richard Laager <[email protected]> Reviewed by: Don Brady <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #2449 Closes #3017 Closes #5159
* Add support for user/group dnode accounting & quotaJinshan Xiong2016-10-071-0/+1
| | | | | | | | | | | | | | | | This patch tracks dnode usage for each user/group in the DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode accounting have the key prefixed with "obj-" followed by the UID/GID in string format (as done for the block accounting). A new SPA feature has been added for dnode accounting as well as a new ZPL version. The SPA feature must be enabled in the pool before upgrading the zfs filesystem. During the zfs version upgrade, a "quotacheck" will be executed by marking all dnode as dirty. ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500 Signed-off-by: Jinshan Xiong <[email protected]> Signed-off-by: Johann Lombardi <[email protected]>
* OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-RTony Hutter2016-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewed by: George Wilson <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Saso Kiselkov <[email protected]> Reviewed by: Richard Lowe <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported by: Tony Hutter <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/4185 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee Porting Notes: This code is ported on top of the Illumos Crypto Framework code: https://github.com/zfsonlinux/zfs/pull/4329/commits/b5e030c8dbb9cd393d313571dee4756fbba8c22d The list of porting changes includes: - Copied module/icp/include/sha2/sha2.h directly from illumos - Removed from module/icp/algs/sha2/sha2.c: #pragma inline(SHA256Init, SHA384Init, SHA512Init) - Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since it now takes in an extra parameter. - Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c - Added skein & edonr to libicp/Makefile.am - Added sha512.S. It was generated from sha512-x86_64.pl in Illumos. - Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument. - In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section to not #include the non-existant endian.h. - In skein_test.c, renane NULL to 0 in "no test vector" array entries to get around a compiler warning. - Fixup test files: - Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>, - Remove <note.h> and define NOTE() as NOP. - Define u_longlong_t - Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p" - Rename NULL to 0 in "no test vector" array entries to get around a compiler warning. - Remove "for isa in $($ISAINFO); do" stuff - Add/update Makefiles - Add some userspace headers like stdio.h/stdlib.h in places of sys/types.h. - EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules. - Update scripts/zfs2zol-patch.sed - include <sys/sha2.h> in sha2_impl.h - Add sha2.h to include/sys/Makefile.am - Add skein and edonr dirs to icp Makefile - Add new checksums to zpool_get.cfg - Move checksum switch block from zfs_secpolicy_setprop() to zfs_check_settable() - Fix -Wuninitialized error in edonr_byteorder.h on PPC - Fix stack frame size errors on ARM32 - Don't unroll loops in Skein on 32-bit to save stack space - Add memory barriers in sha2.c on 32-bit to save stack space - Add filetest_001_pos.ksh checksum sanity test - Add option to write psudorandom data in file_write utility
* OpenZFS - Performance regression suite for zfstestJohn Wren Kennedy2016-09-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Author: John Wren Kennedy <[email protected]> Reviewed by: Prakash Surya <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Don Brady <[email protected]> Reviewed by: Richard Elling <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Reviewed-by: David Quigley <[email protected]> Approved by: Richard Lowe <[email protected]> Ported-by: Don Brady <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dcbf3bd6 Delphix-commit: https://github.com/delphix/delphix-os/commit/978ed49 Closes #4929 ZFS Test Suite Performance Regression Tests This was pulled into OpenZFS via the compressed arc featureand was separated out in zfsonlinux as a separate pull request from PR-4768. It originally came in as QA-4903 in Delphix-OS from John Kennedy. Expected Usage: $ DISKS="sdb sdc sdd" zfs-tests.sh -r perf-regression.run Porting Notes: 1. Added assertions in the setup script to make sure required tools (fio, mpstat, ...) are present. 2. For the config.json generation in perf.shlib used arcstats and other binaries instead of dtrace to query the values. 3. For the perf data collection: - use "zpool iostat -lpvyL" instead of the io.d dtrace script (currently not collecting zfs_read/write latency stats) - mpstat and iostat take different arguments - prefetch_io.sh is a placeholder that uses arcstats instead of dtrace 4. Build machines require fio, mdadm and sysstat pakage (YMMV). Future Work: - Need a way to measure zfs_read and zfs_write latencies per pool. - Need tools to takes two sets of output and display/graph the differences - Bring over additional regression tests from Delphix
* OpenZFS 5997 - FRU field not set during pool creation and never updatedHans Rosenfeld2016-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Hans Rosenfeld <[email protected]> Reviewed by: Dan Fields <[email protected]> Reviewed by: Josef Sipek <[email protected]> Reviewed by: Richard Elling <[email protected]> Reviewed by: George Wilson <[email protected]> Approved by: Robert Mustacchi <[email protected]> Signed-off-by: Don Brady <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
* Illumos Crypto Port module added to enable native encryption in zfsTom Caputi2016-07-201-1/+4
| | | | | | | | | | | | | | | | | | | | A port of the Illumos Crypto Framework to a Linux kernel module (found in module/icp). This is needed to do the actual encryption work. We cannot use the Linux kernel's built in crypto api because it is only exported to GPL-licensed modules. Having the ICP also means the crypto code can run on any of the other kernels under OpenZFS. I ended up porting over most of the internals of the framework, which means that porting over other API calls (if we need them) should be fairly easy. Specifically, I have ported over the API functions related to encryption, digests, macs, and crypto templates. The ICP is able to use assembly-accelerated encryption on amd64 machines and AES-NI instructions on Intel chips that support it. There are place-holder directories for similar assembly optimizations for other architectures (although they have not been written). Signed-off-by: Tom Caputi <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #4329
* Implement large_dnode pool featureNed Bass2016-06-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3542
* SIMD implementation of vdev_raidz generate and reconstruct routinesGvozden Neskovic2016-06-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new implementation of RAIDZ1/2/3 routines using x86_64 scalar, SSE, and AVX2 instruction sets. Included are 3 parity generation routines (P, PQ, and PQR) and 7 reconstruction routines, for all RAIDZ level. On module load, a quick benchmark of supported routines will select the fastest for each operation and they will be used at runtime. Original implementation is still present and can be selected via module parameter. Patch contains: - specialized gen/rec routines for all RAIDZ levels, - new scalar raidz implementation (unrolled), - two x86_64 SIMD implementations (SSE and AVX2 instructions sets), - fastest routines selected on module load (benchmark). - cmd/raidz_test - verify and benchmark all implementations - added raidz_test to the ZFS Test Suite New zfs module parameters: - zfs_vdev_raidz_impl (str): selects the implementation to use. On module load, the parameter will only accept first 3 options, and the other implementations can be set once module is finished loading. Possible values for this option are: "fastest" - use the fastest math available "original" - use the original raidz code "scalar" - new scalar impl "sse" - new SSE impl if available "avx2" - new AVX2 impl if available See contents of `/sys/module/zfs/parameters/zfs_vdev_raidz_impl` to get the list of supported values. If an implementation is not supported on the system, it will not be shown. Currently selected option is enclosed in `[]`. Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4328
* OpenZFS 6736 - ZFS per-vdev ZAPsJoe Stein2016-05-021-0/+1
| | | | | | | | | | | | | | | | | 6736 ZFS per-vdev ZAPs Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Don Brady <[email protected]> Reviewed by: Dan McDonald <[email protected]> References: https://www.illumos.org/issues/6736 https://github.com/openzfs/openzfs/commit/215198a Ported-by: Don Brady <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4515
* fix booting via dracut generated initramfsMatthew Thode2016-04-251-0/+1
| | | | | | | | | | | | | | | Dracut and Systemd updated how they integrate with each other, because of this our current integrations stopped working (around the time 4.1.13 came out). This patch addresses that issue and gets us booting again. Thanks to @Rudd-O for doing the work to get dracut working again and letting me submit this on his behalf. Signed-off-by: Manuel Amador (Rudd-O) <[email protected]> Signed-off-by: Matthew Thode <[email protected]> Closes #3605 Closes #4478
* Add the ZFS Test SuiteBrian Behlendorf2016-03-161-1/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #6 Closes #1534
* Move dracut directory to contribBrian Behlendorf2015-07-091-2/+2
| | | | | | | The dracut code is analogous to the initramfs code and as such it should be located in the contrib with initramfs for consistency. Signed-off-by: Brian Behlendorf <[email protected]>
* Initramfs scripts for ZoL.Turbo Fredriksson2015-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Supports booting of a ZFS snapshot. Do this by cloning the snapshot into a dataset. If this, the resulting dataset, already exists, destroy it. Then mount it on root. * If snapshot does not exist, use base dataset (the part before '@') as boot filesystem instead. * If no snapshot is specified on the 'root=' kernel command line, but there is an '@', then get a list of snapshots below that filesystem and ask the user which to use. * Clone with 'mountpoint=none' and 'canmount=noauto' - we mount manually and explicitly. * For sub-filesystems, that doesn't have a mountpoint property set, we use the 'org.zol:mountpoint' to keep track of it's mountpoint. * Allow rollback of snapshots instead of clone it and boot from the clone. * Allow mounting a root- and subfs with mountpoint=legacy set * Allow mounting a filesystem which is using nativ encryption. * Support all currently used kernel command line arguments All the different distributions have their own standard on what to specify on the kernel command line to boot of a ZFS filesystem. * Extra options: * zfsdebug=(on,yes,1) Show extra debugging information * zfsforce=(on,yes,1) Force import the pool * rollback=(on,yes,1) Rollback (instead of clone) the snapshot * Only try to import pool if it haven't already been imported * This will negate the need to force import a pool that have not been exported cleanly. * Support exclusion of pools to import by setting ZFS_POOL_EXCEPTIONS in /etc/default/zfs. * Support additional configuration variable ZFS_INITRD_ADDITIONAL_DATASETS to mount additional filesystems not located under your root dataset. * Include /etc/modprobe.d/{zfs,spl}.conf in the initrd if it/they exist. * Include the udev rule to use by-vdev for pool imports. * Include the /etc/default/zfs file to the initrd. * Only try /dev/disk/by-* in the initrd if USE_DISK_BY_ID is set. * Use /dev/disk/by-vdev before anything. * Add /dev as a last ditch attempt. * Fallback to using the cache file if that exist if nothing else worked. * Use /sbin/modprobe instead of built-in (BusyBox) modprobe. This gets rid of the message "modprobe: can't load module zcommon". Thanx to pcoultha for finding this. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #2116 Closes #2114
* Add RHEL style kmod packagesBrian Behlendorf2015-03-271-0/+4
| | | | | | | | | | | | | | | Provide a Redhat specific zfs-kmod.spec file which uses the old style kmods (not kmods2) packaging. By using the provided kmodtool script packages can be built which support weak modules. This allows for the kernel to be updated without having to rebuild the ZFS kernel modules. Packages for RHEL/Centos/SL/TOSS which use this spec file can by built as follows: $ ./configure --with-spec=redhat $ make rpms Signed-off-by: Brian Behlendorf <[email protected]>
* Remove rpm/fedora directoryBrian Behlendorf2015-03-271-4/+0
| | | | | | | | | Originally it was thought that custom spec files might be required for Fedora. Happily that has turns out not to be the case. Since this directory just contains symlinks to the generic spec files it can be removed. Signed-off-by: Brian Behlendorf <[email protected]>
* Fix warning about AM_INIT_AUTOMAKE argumentsHajo Möller2015-03-181-2/+3
| | | | | | | | | | | | | | | | | | | As of automake 1.14.2, currently shipped with Ubuntu 14.04, automake warns about AM_INIT_AUTOMAKE having more than one argument: configure.ac:41: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:41: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation This commit fixes the warnings by following above link's advice, so AM_INIT gets called with the package's name and version. As both are defined in the META file we're parsing it with `grep`, `cut` and `tr`. NOTE: autoconf < 1.14 not supporting m4_esyscmd_s so m4_esyscmd was used and modified `tr` to truncate newlines, too. Signed-off-by: Hajo M<C3><B6>ller <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3174
* Install arc_summary.pyTurbo Fredriksson2015-03-031-0/+1
| | | | | | | | | Add the arc_summary Makefile to the build system so the script is properly included in the distribution tarball and installed. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3147
* Add a pkgconfig fileTurbo Fredriksson2014-08-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Providing a pkg-config file makes is easy for 3rd party applications to link against the libzfs libraries. It also allows the libzfs developers to modify the list of required libraries and cflags without breaking existing applications. The following example illustrates how pkg-config can be used: cc `pkg-config --cflags --libs libzfs` -o myapp myapp.c /* * myapp.c */ void main() { libzfs_handle_t *hdl; hdl = libzfs_init(); if (hdl) libzfs_fini(hdl); } Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes: #585
* Add bash completions by Aneurin Price.Turbo Fredriksson2014-08-061-0/+2
| | | | | | | | | | These can be manually installed as needed by end users. They have been added to the repository so they can be kept up to date with the latest code. Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #1588
* Initial implementation of zed (ZFS Event Daemon)Chris Dunlap2014-04-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #2
* Add systemd unit files for ZFS startupRalf Ertzinger2014-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <[email protected]> Closes #2108
* Add dbufstat.py commandBrian Behlendorf2013-10-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbufstat.py command was added to provide a conveniant way to easily determine what ZFS is caching. The script consumes the raw /proc/spl/kstat/zfs/dbufs kstat data can consolidates it in to a more human readable form. This was designed primarily as a tool to aid developers but it may also be useful for advanced users who want more visibility in to what the ARC is caching. When run without options dbufstat.py will default to showing a list of all objects with at least one buffer present in the cache. The total cache space consumed by that object will be printed on the right along with the object type. Similar to the arcstats.py command the -x option may used to display additional fields. Two other modes of operation are also supported by dbufstat.py and the expectation is additional display modes may be added as needed. The -t option will summerize the total number of bytes cached for each object type, and the -b option will show every dbuf currently cached. The script was designed to be consistent with arcstat.py and includes most of the same options and funcationality. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Illumos #2882, #2883, #2900Matthew Ahrens2013-09-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <[email protected]> Reviewed by: Chris Siden <[email protected]> Reviewed by: Garrett D'Amore <[email protected]> Reviewed by: Bill Pijewski <[email protected]> Reviewed by: Dan Kruchinin <[email protected]> Approved by: Eric Schrock <[email protected]> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
* Modified arcstat.py to run on linuxChrist Schlacta2013-06-181-0/+1
| | | | | | | | | * Modified kstat_update() to read arcstats from proc. * Fix shebang. * Added Makefile.am entries for arcstat.py Signed-off-by: Brian Behlendorf <[email protected]> Closes #1506
* Automake 1.10.1 compat: AM_SILENT_RULESBrian Behlendorf2013-04-021-1/+1
| | | | | | | | | | | | | | | | | | | Part of the automated testing involves building the source on Debian Lenny which ships an ancient version of automake (1.10.1). Historically, this has caused a non-fatal warning about AM_SILENT_RULES not being defined. But when the autogen.sh script was updated to use autoreconf the warning became fatal. configure.ac:31: warning: macro `AM_SILENT_RULES' not found in library autoreconf: running: /usr/bin/autoconf --force configure.ac:34: error: possibly undefined macro: AM_SILENT_RULES If this token and others are legitimate, please use m4_pattern_allow. To resolve this build issue the call to AM_SILENT_RULES has been wrapped by m4_ifdef(). This prevents the macro from being expanded on platforms where it's undefined. Signed-off-by: Brian Behlendorf <[email protected]>
* build: do not call boilerplate ourselfJan Engelhardt2013-04-021-0/+1
| | | | | | | | | | Rationale see section 3.5 "Using `autoreconf' to Update `configure' Scripts" of the autoconf manual. http://www.gnu.org/software/autoconf/manual/autoconf-2.67/html_node/autoreconf-Invocation.html Signed-off-by: Jan Engelhardt <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Refresh RPM packagingBrian Behlendorf2013-03-181-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1341
* Create mount.zfs, zinject, and zpios man pages.Darik Horn2013-03-131-0/+1
| | | | | | | And update the automake templates to install them. Signed-off-by: Brian Behlendorf <[email protected]> Closes #518
* Remove ARCH packagingBrian Behlendorf2013-03-061-2/+0
| | | | | | | | | | | | | | The kernel modules are now available in the Arch User Repository (AUR) via zfs. Since their packaging is maintained and superior to ours it is being removed from the tree. https://wiki.archlinux.org/index.php/ZFS Now that various distributions are picking up the packages we should eventually be able to remove most of this infrastructure. Packaging belongs with the distributions not upstream. Signed-off-by: Brian Behlendorf <[email protected]>
* Retire zpool_id infrastructureBrian Behlendorf2013-01-291-3/+0
| | | | | | | | | | | | | | | | | | | In the interest of maintaining only one udev helper to give vdevs user friendly names, the zpool_id and zpool_layout infrastructure is being retired. They are superseded by vdev_id which incorporates all the previous functionality. Documentation for the new vdev_id(8) helper and its configuration file, vdev_id.conf(5), can be found in their respective man pages. Several useful example files are installed under /etc/zfs/. /etc/zfs/vdev_id.conf.alias.example /etc/zfs/vdev_id.conf.multipath.example /etc/zfs/vdev_id.conf.sas_direct.example /etc/zfs/vdev_id.conf.sas_switch.example Signed-off-by: Brian Behlendorf <[email protected]> Closes #981
* Add /sbin/fsck.zfs helperBrian Behlendorf2013-01-091-0/+1
| | | | | | | | | | A fsck helper to accomidate distributions that expect to be able to execute a fsck on all filesystem types. Currently this script does nothing but it could be extended to act as a compatibility wrapper for 'zpool scrub'. Signed-off-by: Brian Behlendorf <[email protected]> Closes #964
* Illumos #2619 and #2747Christopher Siden2013-01-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | 2619 asynchronous destruction of ZFS file systems 2747 SPA versioning with zfs feature flags Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Richard Lowe <[email protected]> Reviewed by: Dan Kruchinin <[email protected]> Approved by: Eric Schrock <[email protected]> References: illumos/illumos-gate@53089ab7c84db6fb76c16ca50076c147cda11757 illumos/illumos-gate@ad135b5d644628e791c3188a6ecbd9c257961ef8 illumos changeset: 13700:2889e2596bd6 https://www.illumos.org/issues/2619 https://www.illumos.org/issues/2747 NOTE: The grub specific changes were not ported. This change must be made to the Linux grub packages. Ported-by: Brian Behlendorf <[email protected]>
* Add zstreamdump(8) command to examine ZFS send streams.Martin Matuska2012-09-021-0/+1
| | | | | | | | Obtained from: illumos-gate revision 11935:538c866aaac6 Source: ssh://[email protected]/illumos-gate Signed-off-by: Brian Behlendorf <[email protected]> Closes #905
* Support building a zfs-modules-dkms sub packagePrakash Surya2012-08-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for building a zfs-modules-dkms sub package built around Dynamic Kernel Module Support. This is to allow building packages using the DKMS infrastructure which is intended to ease the burden of kernel version changes, upgrades, etc. By default zfs-modules-dkms-* sub package will be built as part of the 'make rpm' target. Alternately, you can build only the DKMS module package using the 'make rpm-dkms' target. Examples: # To build packaged binaries as well as a dkms packages $ ./configure && make rpm # To build only the packaged binary utilities and dkms packages $ ./configure && make rpm-utils rpm-dkms Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported for building the dkms sub package. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #535
* Move zfs.release generation to configure stepBrian Behlendorf2012-07-121-0/+1
| | | | | | | | | | | | | | Previously, the zfs.release file was created at 'make install' time. This is slightly problematic when the file is needed without running 'make install'. Because of this, the step creating the file was removed from 'make install' and replaced with a more appropriate zfs.release.in file. As a result, the zfs.release file will now be created earlier as part of the 'configure' step as opposed to the 'make install' step. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]>
* Add vdev_id for JBOD-friendly udev aliasesNed A. Bass2012-06-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <[email protected]> Closes #713
* Add --enable-debug-dmu-tx configure optionBrian Behlendorf2012-03-231-0/+1
| | | | | | | | | | | | | | | | | | Allow rigorous (and expensive) tx validation to be enabled/disabled indepentantly from the standard zfs debugging. When enabled these checks ensure that all txs are constructed properly and that a dbuf is never dirtied without taking the correct tx hold. This checking is particularly helpful when adding new dmu consumers like Lustre. However, for established consumers such as the zpl with no known outstanding tx construction problems this is just overhead. --enable-debug-dmu-tx - Enable/disable validation of each tx as --disable-debug-dmu-tx it is constructed. By default validation is disabled due to performance concerns. Signed-off-by: Brian Behlendorf <[email protected]>
* Add make rule for building Arch Linux packagesPrakash Surya2011-12-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #491
* Fix autoconf variable substitution in init scripts.Brian Behlendorf2011-08-191-6/+0
| | | | | | | | Change the variable substitution in the init script templates according to the method described in the Autoconf manual; Chapter 4.7.2: Installation Directory Variables. Signed-off-by: Brian Behlendorf <[email protected]>
* Move udev rules from /etc/udev to /lib/udevKyle Fuller2011-08-081-2/+2
| | | | | | | | | | | | | | | | | | | This change moves the default install location for the zfs udev rules from /etc/udev/ to /lib/udev/. The correct convention is for rules provided by a package to be installed in /lib/udev/. The /etc/udev/ directory is reserved for custom rules or local overrides. Additionally, this patch cleans up some abuse of the bindir install location by adding a udevdir and udevruledir install directories. This allows us to revert to the default bin install location. The udev install directories can be set with the following new options. --with-udevdir=DIR install udev helpers [EPREFIX/lib/udev] --with-udevruledir=DIR install udev rules [UDEVDIR/rules.d] Signed-off-by: Brian Behlendorf <[email protected]> Closes #356
* Turn the init.d scripts into autoconf config filesKyle Fuller2011-08-011-0/+6
| | | | | | | | | | This change ensures the paths used by the provided init scripts always reference the prefixes provided at configure time. The @sbindir@ and @sysconfdir@ prefixes will be correctly replaced at build time. Signed-off-by: Brian Behlendorf <[email protected]> Closes #336
* Implemented sharing datasets via NFS using libshare.Gunnar Beutner2011-07-061-0/+1
| | | | | | | | The sharenfs and sharesmb properties depend on the libshare library to export datasets via NFS and SMB. This commit implements the base libshare functionality as well as support for managing NFS shares. Signed-off-by: Brian Behlendorf <[email protected]>
* Multipath device manageability improvementsNed A. Bass2011-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
* Fix autoconf variable substitution in udev rules.Darik Horn2011-06-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Change the variable substitution in the udev rule templates according to the method described in the Autoconf manual; Chapter 4.7.2: Installation Directory Variables. The udev rules are improperly generated if the bindir parameter overrides the prefix parameter during configure. For example: # ./configure --prefix=/usr/local --bindir=/opt/zfs/bin The udev helper is installed as /opt/zfs/bin/zpool_id, but the corresponding udev rule has a different path: # /usr/local/etc/udev/rules.d/60-zpool.rules ENV{DEVTYPE}=="disk", IMPORT{program}="/usr/local/bin/zpool_id -d %p" The @bindir@ variable expands to "${exec_prefix}/bin", so it cannot be used instead of @prefix@ directly. This also applies to the zvol_id helper. Closes #283.
* Set cmd paths in udev rules using --prefixBrian Behlendorf2011-03-251-0/+2
| | | | | | | | | | | | | The udev/rules.d scripts must use absolute paths to their support binaries. However, where those binaries get installed depends on what --prefix was set to when the package was configured. This change makes the udev/rules.d helpers to *.in files which are processed by configure. This allows them to be dynamically updated to include the specified --prefix. Additionally, this change updates 60-zvol.rules to handle both the 'add' and 'change' actions. This ensures that that all valid zvol devices are correctly linked.
* Add dracut supportManuel Amador (Rudd-O)2011-03-171-0/+2
| | | | | | | | | | | | | | | | | To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <[email protected]>
* Add init scriptsBrian Behlendorf2011-03-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | To support automatically mounting your zfs on filesystem on boot a basic init script is needed. Unfortunately, every distribution has their own idea of the _right_ way to do things. Rather than write one very complicated portable init script, which would be invariably replaced by the distributions own anyway. I have instead added support to provide multiple distribution specific init scripts. The correct init script for your distribution will be selected by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT. During 'make install' the correct script for your system will be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the usual /etc/init.d/zfs location. Currently, there is zfs.fedora and a more generic zfs.lsb init script. Hopefully, the distribution maintainers who know best how they want their init scripts to function will feedback their approved versions to be included in the project. This change does not consider upstart jobs but I'm not at all opposed to add that sort of thing.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 05:45:31 +0000