aboutsummaryrefslogtreecommitdiffstats
path: root/configure.ac
Commit message (Collapse)AuthorAgeFilesLines
* Add the ZFS Test SuiteBrian Behlendorf2016-03-161-1/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
* Move dracut directory to contribBrian Behlendorf2015-07-091-2/+2
| | | | | | | The dracut code is analogous to the initramfs code and as such it should be located in the contrib with initramfs for consistency. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Initramfs scripts for ZoL.Turbo Fredriksson2015-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Supports booting of a ZFS snapshot. Do this by cloning the snapshot into a dataset. If this, the resulting dataset, already exists, destroy it. Then mount it on root. * If snapshot does not exist, use base dataset (the part before '@') as boot filesystem instead. * If no snapshot is specified on the 'root=' kernel command line, but there is an '@', then get a list of snapshots below that filesystem and ask the user which to use. * Clone with 'mountpoint=none' and 'canmount=noauto' - we mount manually and explicitly. * For sub-filesystems, that doesn't have a mountpoint property set, we use the 'org.zol:mountpoint' to keep track of it's mountpoint. * Allow rollback of snapshots instead of clone it and boot from the clone. * Allow mounting a root- and subfs with mountpoint=legacy set * Allow mounting a filesystem which is using nativ encryption. * Support all currently used kernel command line arguments All the different distributions have their own standard on what to specify on the kernel command line to boot of a ZFS filesystem. * Extra options: * zfsdebug=(on,yes,1) Show extra debugging information * zfsforce=(on,yes,1) Force import the pool * rollback=(on,yes,1) Rollback (instead of clone) the snapshot * Only try to import pool if it haven't already been imported * This will negate the need to force import a pool that have not been exported cleanly. * Support exclusion of pools to import by setting ZFS_POOL_EXCEPTIONS in /etc/default/zfs. * Support additional configuration variable ZFS_INITRD_ADDITIONAL_DATASETS to mount additional filesystems not located under your root dataset. * Include /etc/modprobe.d/{zfs,spl}.conf in the initrd if it/they exist. * Include the udev rule to use by-vdev for pool imports. * Include the /etc/default/zfs file to the initrd. * Only try /dev/disk/by-* in the initrd if USE_DISK_BY_ID is set. * Use /dev/disk/by-vdev before anything. * Add /dev as a last ditch attempt. * Fallback to using the cache file if that exist if nothing else worked. * Use /sbin/modprobe instead of built-in (BusyBox) modprobe. This gets rid of the message "modprobe: can't load module zcommon". Thanx to pcoultha for finding this. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2116 Closes #2114
* Add RHEL style kmod packagesBrian Behlendorf2015-03-271-0/+4
| | | | | | | | | | | | | | | Provide a Redhat specific zfs-kmod.spec file which uses the old style kmods (not kmods2) packaging. By using the provided kmodtool script packages can be built which support weak modules. This allows for the kernel to be updated without having to rebuild the ZFS kernel modules. Packages for RHEL/Centos/SL/TOSS which use this spec file can by built as follows: $ ./configure --with-spec=redhat $ make rpms Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Remove rpm/fedora directoryBrian Behlendorf2015-03-271-4/+0
| | | | | | | | | Originally it was thought that custom spec files might be required for Fedora. Happily that has turns out not to be the case. Since this directory just contains symlinks to the generic spec files it can be removed. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Fix warning about AM_INIT_AUTOMAKE argumentsHajo Möller2015-03-181-2/+3
| | | | | | | | | | | | | | | | | | | As of automake 1.14.2, currently shipped with Ubuntu 14.04, automake warns about AM_INIT_AUTOMAKE having more than one argument: configure.ac:41: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:41: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation This commit fixes the warnings by following above link's advice, so AM_INIT gets called with the package's name and version. As both are defined in the META file we're parsing it with `grep`, `cut` and `tr`. NOTE: autoconf < 1.14 not supporting m4_esyscmd_s so m4_esyscmd was used and modified `tr` to truncate newlines, too. Signed-off-by: Hajo M<C3><B6>ller <dasjoe@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3174
* Install arc_summary.pyTurbo Fredriksson2015-03-031-0/+1
| | | | | | | | | Add the arc_summary Makefile to the build system so the script is properly included in the distribution tarball and installed. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3147
* Add a pkgconfig fileTurbo Fredriksson2014-08-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Providing a pkg-config file makes is easy for 3rd party applications to link against the libzfs libraries. It also allows the libzfs developers to modify the list of required libraries and cflags without breaking existing applications. The following example illustrates how pkg-config can be used: cc `pkg-config --cflags --libs libzfs` -o myapp myapp.c /* * myapp.c */ void main() { libzfs_handle_t *hdl; hdl = libzfs_init(); if (hdl) libzfs_fini(hdl); } Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #585
* Add bash completions by Aneurin Price.Turbo Fredriksson2014-08-061-0/+2
| | | | | | | | | | These can be manually installed as needed by end users. They have been added to the repository so they can be kept up to date with the latest code. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1588
* Initial implementation of zed (ZFS Event Daemon)Chris Dunlap2014-04-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
* Add systemd unit files for ZFS startupRalf Ertzinger2014-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
* Add dbufstat.py commandBrian Behlendorf2013-10-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbufstat.py command was added to provide a conveniant way to easily determine what ZFS is caching. The script consumes the raw /proc/spl/kstat/zfs/dbufs kstat data can consolidates it in to a more human readable form. This was designed primarily as a tool to aid developers but it may also be useful for advanced users who want more visibility in to what the ARC is caching. When run without options dbufstat.py will default to showing a list of all objects with at least one buffer present in the cache. The total cache space consumed by that object will be printed on the right along with the object type. Similar to the arcstats.py command the -x option may used to display additional fields. Two other modes of operation are also supported by dbufstat.py and the expectation is additional display modes may be added as needed. The -t option will summerize the total number of bytes cached for each object type, and the -b option will show every dbuf currently cached. The script was designed to be consistent with arcstat.py and includes most of the same options and funcationality. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Illumos #2882, #2883, #2900Matthew Ahrens2013-09-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
* Modified arcstat.py to run on linuxChrist Schlacta2013-06-181-0/+1
| | | | | | | | | * Modified kstat_update() to read arcstats from proc. * Fix shebang. * Added Makefile.am entries for arcstat.py Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1506
* Automake 1.10.1 compat: AM_SILENT_RULESBrian Behlendorf2013-04-021-1/+1
| | | | | | | | | | | | | | | | | | | Part of the automated testing involves building the source on Debian Lenny which ships an ancient version of automake (1.10.1). Historically, this has caused a non-fatal warning about AM_SILENT_RULES not being defined. But when the autogen.sh script was updated to use autoreconf the warning became fatal. configure.ac:31: warning: macro `AM_SILENT_RULES' not found in library autoreconf: running: /usr/bin/autoconf --force configure.ac:34: error: possibly undefined macro: AM_SILENT_RULES If this token and others are legitimate, please use m4_pattern_allow. To resolve this build issue the call to AM_SILENT_RULES has been wrapped by m4_ifdef(). This prevents the macro from being expanded on platforms where it's undefined. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* build: do not call boilerplate ourselfJan Engelhardt2013-04-021-0/+1
| | | | | | | | | | Rationale see section 3.5 "Using `autoreconf' to Update `configure' Scripts" of the autoconf manual. http://www.gnu.org/software/autoconf/manual/autoconf-2.67/html_node/autoreconf-Invocation.html Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Refresh RPM packagingBrian Behlendorf2013-03-181-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
* Create mount.zfs, zinject, and zpios man pages.Darik Horn2013-03-131-0/+1
| | | | | | | And update the automake templates to install them. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #518
* Remove ARCH packagingBrian Behlendorf2013-03-061-2/+0
| | | | | | | | | | | | | | The kernel modules are now available in the Arch User Repository (AUR) via zfs. Since their packaging is maintained and superior to ours it is being removed from the tree. https://wiki.archlinux.org/index.php/ZFS Now that various distributions are picking up the packages we should eventually be able to remove most of this infrastructure. Packaging belongs with the distributions not upstream. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Retire zpool_id infrastructureBrian Behlendorf2013-01-291-3/+0
| | | | | | | | | | | | | | | | | | | In the interest of maintaining only one udev helper to give vdevs user friendly names, the zpool_id and zpool_layout infrastructure is being retired. They are superseded by vdev_id which incorporates all the previous functionality. Documentation for the new vdev_id(8) helper and its configuration file, vdev_id.conf(5), can be found in their respective man pages. Several useful example files are installed under /etc/zfs/. /etc/zfs/vdev_id.conf.alias.example /etc/zfs/vdev_id.conf.multipath.example /etc/zfs/vdev_id.conf.sas_direct.example /etc/zfs/vdev_id.conf.sas_switch.example Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #981
* Add /sbin/fsck.zfs helperBrian Behlendorf2013-01-091-0/+1
| | | | | | | | | | A fsck helper to accomidate distributions that expect to be able to execute a fsck on all filesystem types. Currently this script does nothing but it could be extended to act as a compatibility wrapper for 'zpool scrub'. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #964
* Illumos #2619 and #2747Christopher Siden2013-01-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | 2619 asynchronous destruction of ZFS file systems 2747 SPA versioning with zfs feature flags Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@delphix.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: illumos/illumos-gate@53089ab7c84db6fb76c16ca50076c147cda11757 illumos/illumos-gate@ad135b5d644628e791c3188a6ecbd9c257961ef8 illumos changeset: 13700:2889e2596bd6 https://www.illumos.org/issues/2619 https://www.illumos.org/issues/2747 NOTE: The grub specific changes were not ported. This change must be made to the Linux grub packages. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Add zstreamdump(8) command to examine ZFS send streams.Martin Matuska2012-09-021-0/+1
| | | | | | | | Obtained from: illumos-gate revision 11935:538c866aaac6 Source: ssh://anonhg@hg.illumos.org/illumos-gate Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #905
* Support building a zfs-modules-dkms sub packagePrakash Surya2012-08-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for building a zfs-modules-dkms sub package built around Dynamic Kernel Module Support. This is to allow building packages using the DKMS infrastructure which is intended to ease the burden of kernel version changes, upgrades, etc. By default zfs-modules-dkms-* sub package will be built as part of the 'make rpm' target. Alternately, you can build only the DKMS module package using the 'make rpm-dkms' target. Examples: # To build packaged binaries as well as a dkms packages $ ./configure && make rpm # To build only the packaged binary utilities and dkms packages $ ./configure && make rpm-utils rpm-dkms Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported for building the dkms sub package. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #535
* Move zfs.release generation to configure stepBrian Behlendorf2012-07-121-0/+1
| | | | | | | | | | | | | | Previously, the zfs.release file was created at 'make install' time. This is slightly problematic when the file is needed without running 'make install'. Because of this, the step creating the file was removed from 'make install' and replaced with a more appropriate zfs.release.in file. As a result, the zfs.release file will now be created earlier as part of the 'configure' step as opposed to the 'make install' step. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Add vdev_id for JBOD-friendly udev aliasesNed A. Bass2012-06-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
* Add --enable-debug-dmu-tx configure optionBrian Behlendorf2012-03-231-0/+1
| | | | | | | | | | | | | | | | | | Allow rigorous (and expensive) tx validation to be enabled/disabled indepentantly from the standard zfs debugging. When enabled these checks ensure that all txs are constructed properly and that a dbuf is never dirtied without taking the correct tx hold. This checking is particularly helpful when adding new dmu consumers like Lustre. However, for established consumers such as the zpl with no known outstanding tx construction problems this is just overhead. --enable-debug-dmu-tx - Enable/disable validation of each tx as --disable-debug-dmu-tx it is constructed. By default validation is disabled due to performance concerns. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Add make rule for building Arch Linux packagesPrakash Surya2011-12-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #491
* Fix autoconf variable substitution in init scripts.Brian Behlendorf2011-08-191-6/+0
| | | | | | | | Change the variable substitution in the init script templates according to the method described in the Autoconf manual; Chapter 4.7.2: Installation Directory Variables. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Move udev rules from /etc/udev to /lib/udevKyle Fuller2011-08-081-2/+2
| | | | | | | | | | | | | | | | | | | This change moves the default install location for the zfs udev rules from /etc/udev/ to /lib/udev/. The correct convention is for rules provided by a package to be installed in /lib/udev/. The /etc/udev/ directory is reserved for custom rules or local overrides. Additionally, this patch cleans up some abuse of the bindir install location by adding a udevdir and udevruledir install directories. This allows us to revert to the default bin install location. The udev install directories can be set with the following new options. --with-udevdir=DIR install udev helpers [EPREFIX/lib/udev] --with-udevruledir=DIR install udev rules [UDEVDIR/rules.d] Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #356
* Turn the init.d scripts into autoconf config filesKyle Fuller2011-08-011-0/+6
| | | | | | | | | | This change ensures the paths used by the provided init scripts always reference the prefixes provided at configure time. The @sbindir@ and @sysconfdir@ prefixes will be correctly replaced at build time. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #336
* Implemented sharing datasets via NFS using libshare.Gunnar Beutner2011-07-061-0/+1
| | | | | | | | The sharenfs and sharesmb properties depend on the libshare library to export datasets via NFS and SMB. This commit implements the base libshare functionality as well as support for managing NFS shares. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Multipath device manageability improvementsNed A. Bass2011-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
* Fix autoconf variable substitution in udev rules.Darik Horn2011-06-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Change the variable substitution in the udev rule templates according to the method described in the Autoconf manual; Chapter 4.7.2: Installation Directory Variables. The udev rules are improperly generated if the bindir parameter overrides the prefix parameter during configure. For example: # ./configure --prefix=/usr/local --bindir=/opt/zfs/bin The udev helper is installed as /opt/zfs/bin/zpool_id, but the corresponding udev rule has a different path: # /usr/local/etc/udev/rules.d/60-zpool.rules ENV{DEVTYPE}=="disk", IMPORT{program}="/usr/local/bin/zpool_id -d %p" The @bindir@ variable expands to "${exec_prefix}/bin", so it cannot be used instead of @prefix@ directly. This also applies to the zvol_id helper. Closes #283.
* Set cmd paths in udev rules using --prefixBrian Behlendorf2011-03-251-0/+2
| | | | | | | | | | | | | The udev/rules.d scripts must use absolute paths to their support binaries. However, where those binaries get installed depends on what --prefix was set to when the package was configured. This change makes the udev/rules.d helpers to *.in files which are processed by configure. This allows them to be dynamically updated to include the specified --prefix. Additionally, this change updates 60-zvol.rules to handle both the 'add' and 'change' actions. This ensures that that all valid zvol devices are correctly linked.
* Add dracut supportManuel Amador (Rudd-O)2011-03-171-0/+2
| | | | | | | | | | | | | | | | | To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Add init scriptsBrian Behlendorf2011-03-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | To support automatically mounting your zfs on filesystem on boot a basic init script is needed. Unfortunately, every distribution has their own idea of the _right_ way to do things. Rather than write one very complicated portable init script, which would be invariably replaced by the distributions own anyway. I have instead added support to provide multiple distribution specific init scripts. The correct init script for your distribution will be selected by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT. During 'make install' the correct script for your system will be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the usual /etc/init.d/zfs location. Currently, there is zfs.fedora and a more generic zfs.lsb init script. Hopefully, the distribution maintainers who know best how they want their init scripts to function will feedback their approved versions to be included in the project. This change does not consider upstart jobs but I'm not at all opposed to add that sort of thing.
* Fix mount helperBrian Behlendorf2011-03-091-2/+3
| | | | | | | | | | | | | | | | | Several issues related to strange mount/umount behavior were reported and this commit should address most of them. The original idea was to put in place a zfs mount helper (mount.zfs). This helper is used to enforce 'legacy' mount behavior, and perform any extra mount argument processing (selinux, zfsutil, etc). This helper wasn't ready for the 0.6.0-rc1 release but with this change it's functional but needs to extensively tested. This change addresses the following open issues. Closes #101 Closes #107 Closes #113 Closes #115 Closes #119
* Use udev to create /dev/zvol/[dataset_name] linksFajar A. Nugraha2011-02-251-0/+1
| | | | | | | | | | | | | | | | | This commit allows zvols with names longer than 32 characters, which fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102. Changes include: - use /dev/zd* device names for zvol, where * is the device minor (include/sys/fs/zfs.h, module/zfs/zvol.c). - add BLKZNAME ioctl to get dataset name from userland (include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id). - add udev rule to create /dev/zvol/[dataset_name] and the legacy /dev/[dataset_name] symlink. For partitions on zvol, it will create /dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules, cmd/zvol_id). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Add Linux Compat InfrastructureBrian Behlendorf2011-02-101-0/+1
| | | | | | | | | | | | | | Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
* Add [-m map] option to zpool_layoutBrian Behlendorf2010-09-171-0/+1
| | | | | | | | | | | | | | | | | By default the zpool_layout command would always use the slot number assigned by Linux when generating the zdev.conf file. This is a reasonable default there are cases when it makes sense to remap the slot id assigned by Linux using your own custom mapping. This commit adds support to zpool_layout to provide a custom slot mapping file. The file contains in the first column the Linux slot it and in the second column the custom slot mapping. By passing this map file with '-m map' to zpool_config the mapping will be applied when generating zdev.conf. Additionally, two sample mapping have been added which reflect different ways to map the slots in the dragon drawers.
* Support custom build directories and move includesBrian Behlendorf2010-09-081-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
* Add linux zpios supportBrian Behlendorf2010-08-311-0/+2
| | | | | | Linux kernel implementation of PIOS test app. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Add linux libspl supportBrian Behlendorf2010-08-311-0/+5
| | | | | | | | All changes needed for the libspl layer. This includes modifications to files directly copied from OpenSolaris and the addition of new files needed to fill in the gaps. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Add build systemBrian Behlendorf2010-08-311-0/+91
| | | | | | Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
* Removed build system from master branch, will relocate to linux-zfs-branchBrian Behlendorf2008-12-011-164/+0
|
* Working version of M4 macro configBrian Behlendorf2008-11-261-2/+1
|
* Additional buidl system cleanup. Starting to move allBrian Behlendorf2008-11-261-47/+0
| | | | | | of the kernel specific build info in to config/kernel, likewise and user specific build flags should go in config/user. This seems like a reasonable way to go.
* Add SPL prefix to META_* #definesBrian Behlendorf2008-11-261-1/+1
|
* First step of META build system cleanupBrian Behlendorf2008-11-261-14/+2
|