aboutsummaryrefslogtreecommitdiffstats
path: root/cmd
Commit message (Collapse)AuthorAgeFilesLines
* zfs userspace: use zfs_path_to_zhandle so argument can be a pathAllan Jude2020-09-251-7/+9
| | | | | | | | | Change zfs userspace subcommand to use zfs_path_to_zhandle() so that the provided dataset can be a path (/usr) or a dataset (rpool/usr). Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Allan Jude <[email protected]> Closes #8915
* vdev_ashift should only be set onceGeorge Wilson2020-09-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | == Motivation and Context The new vdev ashift optimization prevents the removal of devices when a zfs configuration is comprised of disks which have different logical and physical block sizes. This is caused because we set 'spa_min_ashift' in vdev_open and then later call 'vdev_ashift_optimize'. This would result in an inconsistency between spa's ashift calculations and that of the top-level vdev. In addition, the optimization logical ignores the overridden ashift value that would be provided by '-o ashift=<val>'. == Description This change reworks the vdev ashift optimization so that it's only set the first time the device is configured. It still allows the physical and logical ahsift values to be set every time the device is opened but those values are only consulted on first open. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Cedric Berger <[email protected]> Signed-off-by: George Wilson <[email protected]> External-Issue: DLPX-71831 Closes #10932
* zdb leak detection fails with in-progress device removalMatthew Ahrens2020-09-171-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a device removal is in progress, there are 2 locations for the data that's already been moved: the original location, on the device that's being removed; and the new location, which is pointed to by the indirect mapping. When doing leak detection, zdb needs to know about both locations. To determine what's already been copied, we load the spacemaps of the removing vdev, omit the blocks that are yet to be copied, and then use the vdev's remap op to find the new location. The problem is with an optimization to the spacemap-loading code in zdb. When processing the log spacemaps, we ignore entries that are not relevant because they are past the point that's been copied. However, entries which span the point that's been copied (i.e. they are partly relevant and partly irrelevant) are processed normally. This can lead to an illegal spacemap operation, for example if offsets up to 100KB have been copied, and the spacemap log has the following entries: ALLOC 50KB-150KB (partly relevant) FREE 50KB-100KB (entirely relevant) FREE 100KB-150KB (entirely irrlevant - ignored) ALLOC 50KB-150KB (partly relevant) Because the entirely irrelevant entry was ignored, its space remains in the spacemap. When the last entry is processed, we attempt to add it to the spacemap, but it partially overlaps with the 100-150KB entry that was left over. This problem was discovered by ztest/zloop. One solution would be to also ignore the irrelevant parts of partially-irrelevant entries (i.e. when processing the ALLOC 50-150, to only add 50-100 to the spacemap). However, this commit implements a simpler solution, which is to remove this optimization entirely. I.e. to process the entire spacemap log, without regard for the point that's been copied. After reconstructing the entire allocatable range tree, there's already code to remove the parts that have not yet been copied. Reviewed-by: Serapheim Dimitropoulos <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-71820 Closes #10920
* cmd/zgenhostid: replace with simple c implementationGeorgy Yakovlev2020-09-164-62/+158
| | | | | | | | | | | | | | | | | | It was discovered that dracut scripts and zgenhostid always generate little-endian /etc/hostid. This commit provides simple endianess-aware binary and updates the scripts to use it. New features include: -f flag to force overwrite. -o flag to write to different file (for dracut) accepting both 0x01234567 and 01234567 values as input Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Olaf Faaland <[email protected]> Signed-off-by: Georgy Yakovlev <[email protected]> Closes #10887 Closes #10925
* Add L2ARC arcstats for MFU/MRU buffers and buffer content typeGeorge Amanakis2020-09-144-6/+156
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the ARC state (MFU/MRU) of cached L2ARC buffer and their content type is unknown. Knowing this information may prove beneficial in adjusting the L2ARC caching policy. This commit adds L2ARC arcstats that display the aligned size (in bytes) of L2ARC buffers according to their content type (data/metadata) and according to their ARC state (MRU/MFU or prefetch). It also expands the existing evict_l2_eligible arcstat to differentiate between MFU and MRU buffers. L2ARC caches buffers from the MRU and MFU lists of ARC. Upon caching a buffer, its ARC state (MRU/MFU) is stored in the L2 header (b_arcs_state). The l2_m{f,r}u_asize arcstats reflect the aligned size (in bytes) of L2ARC buffers according to their ARC state (based on b_arcs_state). We also account for the case where an L2ARC and ARC cached MRU or MRU_ghost buffer transitions to MFU. The l2_prefetch_asize reflects the alinged size (in bytes) of L2ARC buffers that were cached while they had the prefetch flag set in ARC. This is dynamically updated as the prefetch flag of L2ARC buffers changes. When buffers are evicted from ARC, if they are determined to be L2ARC eligible then their logical size is recorded in evict_l2_eligible_m{r,f}u arcstats according to their ARC state upon eviction. Persistent L2ARC: When committing an L2ARC buffer to a log block (L2ARC metadata) its b_arcs_state and prefetch flag is also stored. If the buffer changes its arcstate or prefetch flag this is reflected in the above arcstats. However, the L2ARC metadata cannot currently be updated to reflect this change. Example: L2ARC caches an MRU buffer. L2ARC metadata and arcstats count this as an MRU buffer. The buffer transitions to MFU. The arcstats are updated to reflect this. Upon pool re-import or on/offlining the L2ARC device the arcstats are cleared and the buffer will now be counted as an MRU buffer, as the L2ARC metadata were not updated. Bug fix: - If l2arc_noprefetch is set, arc_read_done clears the L2CACHE flag of an ARC buffer. However, prefetches may be issued in a way that arc_read_done() is bypassed. Instead, move the related code in l2arc_write_eligible() to account for those cases too. Also add a test and update manpages for l2arc_mfuonly module parameter, and update the manpages and code comments for l2arc_noprefetch. Move persist_l2arc tests to l2arc. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: George Amanakis <[email protected]> Closes #10743
* Force the use of '.' as decimal separator.xdch472020-09-093-0/+3
| | | | | | | | | This solves issues occurring with a different decimal operator and keeps the command line interface consistent for all locales . E.g. `zfs set quota=0.5T` Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Felix Neumärker <[email protected]> Closes #10878
* Add 'zfs rename -u' to rename without remountingRyan Moeller2020-09-011-13/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | Allow to rename file systems without remounting if it is possible. It is possible for file systems with 'mountpoint' property set to 'legacy' or 'none' - we don't have to change mount directory for them. Currently such file systems are unmounted on rename and not even mounted back. This introduces layering violation, as we need to update 'f_mntfromname' field in statfs structure related to mountpoint (for the dataset we are renaming and all its children). In my opinion it is worth it, as it allow to update FreeBSD in even cleaner way - in ZFS-only configuration root file system is ZFS file system with 'mountpoint' property set to 'legacy'. If root dataset is named system/rootfs, we can snapshot it (system/rootfs@upgrade), clone it (system/oldrootfs), update FreeBSD and if it doesn't boot we can boot back from system/oldrootfs and rename it back to system/rootfs while it is mounted as /. Before it was not possible, because unmounting / was not possible. Authored by: Pawel Jakub Dawidek <[email protected]> Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Ported by: Matt Macy <[email protected]> Signed-off-by: Ryan Moeller <[email protected]> Closes #10839
* Typo CorrectionSpencer Kinny2020-08-301-1/+1
| | | | | | | | | | Corrected the typo in zfs/cmd/zfs/zfs_main.c line number 404 pbkfd2iters to pbkdf2iters Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Spencer Kinny <[email protected]> Closes #10850
* zpool: Change base URL for ZFS messages to openzfs-docsRyan Moeller2020-08-261-3/+6
| | | | | | | Reviewed-by: George Melikov <[email protected]> Reviewed-by: Kjeld Schouten <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ryan Moeller <[email protected]> Closes #10820
* Import vdev ashift optimization from FreeBSDRyan Moeller2020-08-211-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many modern devices use physical allocation units that are much larger than the minimum logical allocation size accessible by external commands. Two prevalent examples of this are 512e disk drives (512b logical sector, 4K physical sector) and flash devices (512b logical sector, 4K or larger allocation block size, and 128k or larger erase block size). Operations that modify less than the physical sector size result in a costly read-modify-write or garbage collection sequence on these devices. Simply exporting the true physical sector of the device to ZFS would yield optimal performance, but has two serious drawbacks: 1. Existing pools created with devices that have different logical and physical block sizes, but were configured to use the logical block size (e.g. because the OS version used for pool construction reported the logical block size instead of the physical block size) will suddenly find that the vdev allocation size has increased. This can be easily tolerated for active members of the array, but ZFS would prevent replacement of a vdev with another identical device because it now appears that the smaller allocation size required by the pool is not supported by the new device. 2. The device's physical block size may be too large to be supported by ZFS. The optimal allocation size for the vdev may be quite large. For example, a RAID controller may export a vdev that requires read-modify-write cycles unless accessed using 64k aligned/sized requests. ZFS currently has an 8k minimum block size limit. Reporting both the logical and physical allocation sizes for vdevs solves these problems. A device may be used so long as the logical block size is compatible with the configuration. By comparing the logical and physical block sizes, new configurations can be optimized and administrators can be notified of any existing pools that are sub-optimal. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Co-authored-by: Matthew Macy <[email protected]> Signed-off-by: Matt Macy <[email protected]> Closes #10619
* Silence 'make checkbashisms'Brian Behlendorf2020-08-201-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d2bce6d03 added the 'make checkbashisms' target but did not resolve all of the bashisms in the scripts. This commit doesn't resolve them all either but it does fix up a few, and it excludes the others so 'make checkstyle' no longer prints warnings. It's a small step in the right direction. * Dracut is Linux specific and itself depends on bash. Therefore all dracut support scripts can be bash specific, update their shebang accordingly. * zed-functions.sh, zfs-import, zfs-mount, zfs-zed, smart paxcheck.sh, make_gitrev.sh - these scripts were excuded from the check until they can be updated and properly tested. * zfsunlock - only whole values for sleep are allowed. * vdev_id - removed unneeded locals; use && instead of -a. * dkms.mkconf, dkms.postbuil - use || instead of -o. Reviewed-by: InsanePrawn <[email protected]> Reviewed-by: Gabriel A. Devenyi <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10755
* 'zfs share -a' should clean noauto exportsDon Brady2020-08-201-1/+4
| | | | | | | | | | | | | | | | | | This is a follow on to PR #10688 where `zfs share -a` allows the sharing of canmount=noauto datasets if they are mounted. However, when a dataset with canmount=noauto is not mounted, the command should also purge any existing entries from the exports file. Otherwise, after a reboot, the nfs server attempts to export the underlying mountpath, not the dataset. This can lead to a hard hang for existing client mounts. Instead of just skipping the adding of an export if not mounted and canmount=noauto, have it also remove an existing export of the dataset so that, after a reboot, we don't export an unmounted dataset. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Wilson <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #10747
* Add zstd support to zfsMichael Niewöhner2020-08-202-11/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <[email protected]> Co-authored-by: Brian Behlendorf <[email protected]> Co-authored-by: Sebastian Gottschall <[email protected]> Co-authored-by: Kjeld Schouten-Lebbing <[email protected]> Co-authored-by: Michael Niewöhner <[email protected]> Signed-off-by: Allan Jude <[email protected]> Signed-off-by: Allan Jude <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Sebastian Gottschall <[email protected]> Signed-off-by: Kjeld Schouten-Lebbing <[email protected]> Signed-off-by: Michael Niewöhner <[email protected]> Closes #6247 Closes #9024 Closes #10277 Closes #10278
* ZED: Do not offline a missing device if no spare is availableBrian Behlendorf2020-08-181-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | Due to commit d48091d a removed device is now explicitly offlined by the ZED if no spare is available, rather than the letting ZFS detect it as UNAVAIL. This broke auto-replacing of whole-disk devices, as described in issue #10577. In short, when a new device is reinserted in the same slot, the ZED will try to ONLINE it without letting ZFS recreate the necessary partition table. This change simply avoids setting the device OFFLINE when removed if no spare is available (or if spare_on_remove is false). This change has been left minimal to allow it to be backported to 0.8.x release. The auto_offline_001_pos ZTS test has been updated accordingly. Some follow up work is planned to update the ZED so it transitions the vdev to a REMOVED state. This is a state which has always existed but there is no current interface the ZED can use to accomplish this. Therefore it's being left to a follow up PR. Reviewed-by: Gionatan Danti <[email protected]> Co-authored-by: Gionatan Danti <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10577 Closes #10730
* Include scatter_chunk_waste in arc_sizeMatthew Ahrens2020-08-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARC caches data in scatter ABD's, which are collections of pages, which are typically 4K. Therefore, the space used to cache each block is rounded up to a multiple of 4K. The ABD subsystem tracks this wasted memory in the `scatter_chunk_waste` kstat. However, the ARC's `size` is not aware of the memory used by this round-up, it only accounts for the size that it requested from the ABD subsystem. Therefore, the ARC is effectively using more memory than it is aware of, due to the `scatter_chunk_waste`. This impacts observability, e.g. `arcstat` will show that the ARC is using less memory than it effectively is. It also impacts how the ARC responds to memory pressure. As the amount of `scatter_chunk_waste` changes, it appears to the ARC as memory pressure, so it needs to resize `arc_c`. If the sector size (`1<<ashift`) is the same as the page size (or larger), there won't be any waste. If the (compressed) block size is relatively large compared to the page size, the amount of `scatter_chunk_waste` will be small, so the problematic effects are minimal. However, if using 512B sectors (`ashift=9`), and the (compressed) block size is small (e.g. `compression=on` with the default `volblocksize=8k` or a decreased `recordsize`), the amount of `scatter_chunk_waste` can be very large. On a production system, with `arc_size` at a constant 50% of memory, `scatter_chunk_waste` has been been observed to be 10-30% of memory. This commit adds `scatter_chunk_waste` to `arc_size`, and adds a new `waste` field to `arcstat`. As a result, the ARC's memory usage is more observable, and `arc_c` does not need to be adjusted as frequently. Reviewed-by: Pavel Zakharov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #10701
* Fix reporting of L2ARC writes in arc_summary3George Amanakis2020-08-171-3/+3
| | | | | | | | | | arc_summary3 reports L2ARC writes in bytes. However, the related arc_stat is reported as hits. arc_summary2 report this correctly. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: George Amanakis <[email protected]> Closes #10717
* 'zfs share -a' should handle 'canmount=noauto'George Wilson2020-08-111-1/+9
| | | | | | | | | | | | | | | | The 'zfs share -a' currently skips any filesystems which have 'canmount=noauto' set. This behavior is unexpected since the one would expect 'zfs share -a' to share any mounted filesystem that has the 'sharenfs' property already set. This changes the behavior of 'zfs share -a' to allow the sharing of 'canmount=noauto' datasets if they are mounted. Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Don Brady <[email protected]> Reviewed-by: Prakash Surya <[email protected]> Signed-off-by: George Wilson <[email protected]> External-issue: DLPX-71313 Closes #10688
* Changes to make openzfs build within FreeBSD buildworldMatthew Macy2020-07-311-1/+1
| | | | | | | | | A collection of header changes to enable FreeBSD to build with vendored OpenZFS. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matt Macy <[email protected]> Closes #10635
* Rename refcount.h to zfs_refcount.hMatthew Macy2020-07-291-1/+1
| | | | | | | | | Renamed to avoid conflicting with refcount.h when a different implementation is already provided by the platform. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matt Macy <[email protected]> Closes #10620
* Add support to decode a resume tokentony-zfs2020-07-234-1/+86
| | | | | | | | | | | | Adding a new subcommand to zstream called token. This now allows users to decode a resume token to retrieve the toname field. This can be useful for tools that need this information. The syntax works as follows zstream token <resume_token>. Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Paul Zuchowski <[email protected]> Signed-off-by: Tony Perkins <[email protected]> Closes #10558
* FreeBSD: Add legacy arc_min and arc_maxRyan Moeller2020-07-191-1/+1
| | | | | | | | | These tunables were renamed from vfs.zfs.arc_min and vfs.zfs.arc_max to vfs.zfs.arc.min and vfs.zfs.arc.max. Add legacy compat tunables for the old names. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ryan Moeller <[email protected]> Closes #10579
* Extend zdb to print inconsistencies in livelists and metaslabsMatthew Ahrens2020-07-142-57/+599
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Co-authored-by: Sara Hartse <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> External-issue: DLPX-66031 Closes #10515
* Centralize variable substitutionArvind Sankar2020-07-149-42/+22
| | | | | | | | | | | | A bunch of places need to edit files to incorporate the configured paths i.e. bindir, sbindir etc. Move this logic into a common file. Create arc_summary by copying arc_summary[23] as appropriate at build time instead of install time. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10559
* Remove dependency on sharetab file and refactor sharing logicGeorge Wilson2020-07-132-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | == Motivation and Context The current implementation of 'sharenfs' and 'sharesmb' relies on the use of the sharetab file. The use of this file is os-specific and not required by linux or freebsd. Currently the code must maintain updates to this file which adds complexity and presents a significant performance impact when sharing many datasets. In addition, concurrently running 'zfs sharenfs' command results in missing entries in the sharetab file leading to unexpected failures. == Description This change removes the sharetab logic from the linux and freebsd implementation of 'sharenfs' and 'sharesmb'. It still preserves an os-specific library which contains the logic required for sharing NFS or SMB. The following entry points exist in the vastly simplified libshare library: - sa_enable_share -- shares a dataset but may not commit the change - sa_disable_share -- unshares a dataset but may not commit the change - sa_is_shared -- determine if a dataset is shared - sa_commit_share -- notify NFS/SMB subsystem to commit the shares - sa_validate_shareopts -- determine if sharing options are valid The sa_commit_share entry point is provided as a performance enhancement and is not required. The sa_enable_share/sa_disable_share may commit the share as part of the implementation. Libshare provides a framework for both NFS and SMB but some operating systems may not fully support these protocols or all features of the protocol. NFS Operation: For linux, libshare updates /etc/exports.d/zfs.exports to add and remove shares and then commits the changes by invoking 'exportfs -r'. This file, is automatically read by the kernel NFS implementation which makes for better integration with the NFS systemd service. For FreeBSD, libshare updates /etc/zfs/exports to add and remove shares and then commits the changes by sending a SIGHUP to mountd. SMB Operation: For linux, libshare adds and removes files in /var/lib/samba/usershares by calling the 'net' command directly. There is no need to commit the changes. FreeBSD does not support SMB. == Performance Results To test sharing performance we created a pool with an increasing number of datasets and invoked various zfs actions that would enable and disable sharing. The performance testing was limited to NFS sharing. The following tests were performed on an 8 vCPU system with 128GB and a pool comprised of 4 50GB SSDs: Scale testing: - Share all filesystems in parallel -- zfs sharenfs=on <dataset> & - Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> & Functional testing: - share each filesystem serially -- zfs share -a - unshare each filesystem serially -- zfs unshare -a - reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool> For 'zfs sharenfs=on' scale testing we saw an average reduction in time of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time of 83.36%. Functional testing also shows a huge improvement: - zfs share -- 97.97% reduction in time - zfs unshare -- 96.47% reduction in time - zfs inhert -r sharenfs -- 99.01% reduction in time Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Bryant G. Ly <[email protected]> Signed-off-by: George Wilson <[email protected]> External-Issue: DLPX-68690 Closes #1603 Closes #7692 Closes #7943 Closes #10300
* Unconditionally enable debugging for libzpoolSerapheim Dimitropoulos2020-07-104-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | We already enable -DDEBUG unconditionally (meaning regardless of this is a debug build or a performance build) for zdb and ztest as they are mostly used for development and debugging. This patch enables -DDEBUG for libzpool extending the debugging checks for zdb, ztest, and a couple of other test utilities. In addition to passing -DDEBUG we also enable -DZFS_DEBUG so all assertion checks work s expected. We do so not only in libzpool but in every utility that links to it, even if the utility doesn't directly use any functionality wrapped in ZFS_DEBUG macro definitions. The reason is that these utilities may still include headers that contain structs that have more fields when ZFS_DEBUG is defined. This can be a problem as enabling that flag for libzpool but not for zdb can lead into random problems (e.g. segmentation faults) as zdb may be have an incorrect view of a struct passed to it by libzpool. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Signed-off-by: Serapheim Dimitropoulos <[email protected]> Closes #10549
* Use abs_top_builddir when referencing librariesArvind Sankar2020-07-1011-33/+33
| | | | | | | | | | | | | | | | | | | | | libtool stores absolute paths in the dependency_libs component of the .la files. If the Makefile for a dependent library refers to the libraries by relative path, some libraries end up duplicated on the link command line. As an example, libzfs specifies libzfs_core, libnvpair and libuutil as dependencies to be linked in. The .la file for libzfs_core also specifies libnvpair, but using an absolute path, with the result that libnvpair is present twice in the linker command line for producing libzfs. While the only thing this causes is to slightly slow down the linking, we can avoid it by using absolute paths everywhere, including for convenience libraries just for consistency. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10538
* Add config.rpath for AM_GNU_GETTEXTArvind Sankar2020-07-103-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | Commit e8864b1b28c2 ("config: libintl/libiconv for gettext() detection") added an empty config.rpath with a comment that the real one doesn't work with libtool. However, an empty config.rpath doesn't really work: eg. on FreeBSD, where libintl is in /usr/local/lib, configure thinks that gettext doesn't exist and NLS should be disabled, which currently isn't supported in the source, and hence requires manual workaround to directly link -lintl without relying on configure. config.rpath is essential to let it be detected either in --prefix or using --with-libintl-prefix. I also don't see the mentioned issue with libtool flags applied to compilation, it seems to work fine to pass LTLIBINTL to libtool. It's unnecessary to include LTLIBICONV as the configure test will automatically append that to LTLIBINTL if it is necessary to link with libiconv. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10538
* Clean up lib dependenciesArvind Sankar2020-07-1010-26/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libzutil is currently statically linked into libzfs, libzfs_core and libzpool. Avoid the unnecessary duplication by removing it from libzfs and libzpool, and adding libzfs_core to libzpool. Remove a few unnecessary dependencies: - libuutil from libzfs_core - libtirpc from libspl - keep only libcrypto in libzfs, as we don't use any functions from libssl - librt is only used for clock_gettime, however on modern systems that's in libc rather than librt. Add a configure check to see if we actually need librt - libdl from raidz_test Add a few missing dependencies: - zlib to libefi and libzfs - libuuid to zpool, and libuuid and libudev to zed - libnvpair uses assertions, so add assert.c to provide aok and libspl_assertf Sort the LDADD for programs so that libraries that satisfy dependencies come at the end rather than the beginning of the linker command line. Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY instead. This can take advantage of pkg-config, and it also avoids polluting LIBS. List all the required dependencies in the pkgconfig files, and move the one for libzfs_core into the latter's directory. Install pkgconfig files in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on FreeBSD, instead of /usr/share/pkgconfig, as the more correct location for library .pc files. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10538
* Add device rebuild featureBrian Behlendorf2020-07-035-62/+343
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: John Poduska <[email protected]> Co-authored-by: Mark Maybee <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10349
* Style fixesBrian Behlendorf2020-06-271-0/+1
| | | | | | | * Fix cstyle issue in shrinker.h which exceeded 80 columns. * Silence shellcheck warning in zpool.d/smart script. Signed-off-by: Brian Behlendorf <[email protected]>
* Make zstreamdump output the size of the payload for BEGIN recordsAllan Jude2020-06-271-0/+2
| | | | | | | | | This is helpful for determining the size of the nvlist of snapshots and properties Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Allan Jude <[email protected]> Closes #10505
* arcstat: add 'avail', fix 'free'Matthew Ahrens2020-06-261-11/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The meaning of the `free` field is currently `zfs_arc_sys_free`, which is the target amount of memory to leave free for the system, and is constant after booting. This commit changes the meaning of `free` to arc_free_memory(), the amount of memory that the ARC considers to be free. It also adds a new arcstat field `avail`, which tracks `arc_available_memory()`. Since `avail` can be negative, it also updates the arcstat script to pretty-print negative values. example output: $ arcstat -f time,miss,arcsz,c,grow,need,free,avail 1 time miss arcsz c grow need free avail 15:03:02 39K 114G 114G 0 0 2.4G 407M 15:03:03 42K 114G 114G 0 0 2.1G 120M 15:03:04 40K 114G 114G 0 0 1.8G -177M 15:03:05 24K 113G 112G 0 0 1.7G -269M 15:03:06 29K 111G 110G 0 0 1.6G -385M 15:03:07 27K 110G 108G 0 0 1.4G -535M 15:03:08 13K 108G 108G 0 0 2.2G 239M 15:03:09 33K 107G 107G 0 0 1.3G -639M 15:03:10 16K 105G 102G 0 0 2.6G 704M 15:03:11 7.2K 102G 102G 0 0 5.1G 3.1G 15:03:12 42K 103G 102G 0 0 4.8G 2.8G Reviewed-by: George Melikov <[email protected]> Reviewed-by: Pavel Zakharov <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #10494
* Add block histogram to zdbRobert Novak2020-06-261-0/+203
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The block histogram tracks the changes to psize, lsize and asize both in the count of the number of blocks (by blocksize) and the total length of all of the blocks for that blocksize. It also keeps a running total of the cumulative size of all of the blocks up to each size to help determine the size of caching SSDs to be added to zfs hardware deployments. The block history counts and lengths are summarized in bins which are powers of two. Even rows with counts of zero are printed. This change is accessed by specifying one of two options: zdb -bbb pool zdb -Pbbb pool The first version prints the table in fixed size columns. The second prints in "parseable" output that can be placed into a CSV file. Fixed Column, nicenum output sample: block psize lsize asize size Count Length Cum. Count Length Cum. Count Length Cum. 512: 3.50K 1.75M 1.75M 3.43K 1.71M 1.71M 3.41K 1.71M 1.71M 1K: 3.65K 3.67M 5.43M 3.43K 3.44M 5.15M 3.50K 3.51M 5.22M 2K: 3.45K 6.92M 12.3M 3.41K 6.83M 12.0M 3.59K 7.26M 12.5M 4K: 3.44K 13.8M 26.1M 3.43K 13.7M 25.7M 3.49K 14.1M 26.6M 8K: 3.42K 27.3M 53.5M 3.41K 27.3M 53.0M 3.44K 27.6M 54.2M 16K: 3.43K 54.9M 108M 3.50K 56.1M 109M 3.42K 54.7M 109M 32K: 3.44K 110M 219M 3.41K 109M 218M 3.43K 110M 219M 64K: 3.41K 218M 437M 3.41K 218M 437M 3.44K 221M 439M 128K: 3.41K 437M 874M 3.70K 474M 911M 3.41K 437M 876M 256K: 3.41K 874M 1.71G 3.41K 874M 1.74G 3.41K 874M 1.71G 512K: 3.41K 1.71G 3.41G 3.41K 1.71G 3.45G 3.41K 1.71G 3.42G 1M: 3.41K 3.41G 6.82G 3.41K 3.41G 6.86G 3.41K 3.41G 6.83G 2M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 4M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 8M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 16M: 0 0 6.82G 0 0 6.86G 0 0 6.83G Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Robert E. Novak <[email protected]> Closes: #9158 Closes #10315
* Fixes for make distArvind Sankar2020-06-262-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce the usage of EXTRA_DIST. If files are conditionally included in _SOURCES, _HEADERS etc, automake is smart enough to dist all files that could possibly be included, but this does not apply to EXTRA_DIST, resulting in make dist depending on the configuration. Add some files that were missing altogether in various Makefile's. The changes to disted files in this commit (excluding deleted files): +./cmd/zed/agents/README.md +./etc/init.d/README.md +./lib/libspl/os/freebsd/getexecname.c +./lib/libspl/os/freebsd/gethostid.c +./lib/libspl/os/freebsd/getmntany.c +./lib/libspl/os/freebsd/mnttab.c -./lib/libzfs/libzfs_core.pc -./lib/libzfs/libzfs.pc +./lib/libzfs/os/freebsd/libzfs_compat.c +./lib/libzfs/os/freebsd/libzfs_fsshare.c +./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c +./lib/libzfs/os/freebsd/libzfs_zmount.c +./lib/libzutil/os/freebsd/zutil_compat.c +./lib/libzutil/os/freebsd/zutil_device_path_os.c +./lib/libzutil/os/freebsd/zutil_import_os.c +./module/lua/README.zfs +./module/os/linux/spl/README.md +./tests/README.md +./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh +./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh +./tests/zfs-tests/tests/functional/inheritance/README.config +./tests/zfs-tests/tests/functional/inheritance/README.state +./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh +./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10501
* Fix check for sed --in-placeArvind Sankar2020-06-242-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The test added in commit 4313a5b4c51e ("Detect if sed supports --in-place") doesn't work at least on my system (autoconfig-2.69). The issue is that SED has already been found and cached before this function is evaluated, with the result that the test is completely skipped. ... checking for a sed that does not truncate output... /usr/bin/sed ... checking for sed --in-place... (cached) /usr/bin/sed The first test is executed by libtool.m4. This looks to have been around in libtool for at least 15 years or so, not sure why this was not encountered at the time of the original commit. Fix this by caching the value of the ac_inplace flag rather than the path to SED. Also use $SED and add AC_REQUIRE to ensure that we use the sed that was located by the standard configure test. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10493
* Add trim_finish notify script for ZEDKevin P. Fleming2020-06-242-1/+39
| | | | | | | | | | | Allow users to configure notifications when TRIM operations are completed on pools. Unlike resilver_finish and scrub_finish, the trim_finish event is generated for each vdev in the pool which was trimmed, so the script will generate a notification for each one. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Kevin P. Fleming <[email protected]> Closes #10491
* zed additional featuresJorgen Lundman2020-06-225-12/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds two features to zed, that macOS desires. The first is that when you unload the kernel module, zed would enter into a cpubusy loop calling zfs_events_next() repeatedly. We now look for ENODEV, returned by kernel, so zed can exit gracefully. Second feature is -I (idle) (alas -P persist was taken) is for the deamon to; 1; if started without ZFS kernel module, stick around waiting for it. 2; if kernel module is unloaded, go back to 1. This is due to daemons in macOS is started by launchctl, and is expected to stick around. Currently, the busy loop only exists when errno is ENODEV. This is to ensure that functionality that upstream expects is not changed. It did not care about errors before, and it still does not. (with the exception of ENODEV). However, it is probably better that all errors (ERESTART notwithstanding) exits the loop, and the issues complaining about zed taking all CPU will go away. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Jorgen Lundman <[email protected]> Closes #10476
* Remove unnecessary terminology from error-injection in ztestSerapheim Dimitropoulos2020-06-221-13/+15
| | | | | | | | | Rephrase error-injection comment in ztest to be more clear. Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Sara Hartse <[email protected]> Signed-off-by: Serapheim Dimitropoulos <[email protected]> Closes #10482
* zfs allow/unallow should work with numeric uid/gidAndriy Gapon2020-06-191-6/+13
| | | | | | | | | | | | | And that should work even (especially) if there is no matching user or group name. The change is originally by Xin Lin <[email protected]>. Original-patch-by: Xin Li <[email protected]> Reviewed-by: Yuri Pankov <[email protected]> Reviewed-by: Andy Stormont <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Andriy Gapon <[email protected]> Closes #9792 Closes #10280
* Add include files for prototypesArvind Sankar2020-06-184-0/+4
| | | | | | | | | | Include the header with prototypes in the file that provides definitions as well, to catch any mismatch between prototype and definition. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10470
* Remove dead codeArvind Sankar2020-06-181-10/+0
| | | | | | | | | Delete unused functions. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10470
* Mark functions as staticArvind Sankar2020-06-189-28/+28
| | | | | | | | | | | Mark functions used only in the same translation unit as static. This only includes functions that do not have a prototype in a header file either. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10470
* Avoid adding new primitives in zpool waitJorgen Lundman2020-06-181-11/+22
| | | | | | | | | | zpool wait brought in sem_init() and family, which is a primitive set not previously used in Open ZFS. It also happens to be deprecated on macOS. Replace with phtread API calls. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: John Gallagher <[email protected]> Signed-off-by: Jorgen Lundman <[email protected]> Closes #10468
* Remove refences to blacklist/whitelistMatthew Ahrens2020-06-162-3/+3
| | | | | | | | | | | | | | | | | | | | These terms reinforce the incorrect notion that black is bad and white is good. Replace this language with more specific terms which are also more clear and don't rely on metaphor. Specifically: * When vdevs are specified on the command line, they are the "selected" vdevs. * Entries in /dev/ which should not be considered as possible disks are "excluded" devices. Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Wilson <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #10457
* Remove unnecessary references to slaveryMatthew Ahrens2020-06-102-9/+6
| | | | | | | | | | | | | | | | | | | | | | The horrible effects of human slavery continue to impact society. The casual use of the term "slave" in computer software is an unnecessary reference to a painful human experience. This commit removes all possible references to the term "slave". Implementation notes: The zpool.d/slaves script is renamed to dm-deps, which uses the same terminology as `dmsetup deps`. References to the `/sys/class/block/$dev/slaves` directory remain. This directory name is determined by the Linux kernel. Although `dmsetup deps` provides the same information, it unfortunately requires elevated privileges, whereas the `/sys/...` directory is world-readable. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #10435
* Fix VPATH builds for user configArvind Sankar2020-06-101-1/+1
| | | | | | | | | | cmd/zpool and lib/libzutil Makefile's use -I., which won't work with a VPATH build. Replace it with -I$(srcdir) instead. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Arvind Sankar <[email protected]> Closes #10379 Closes #10421
* File incorrectly zeroed when receiving incremental stream that toggles -LMatthew Ahrens2020-06-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Matthew Ahrens <[email protected]> Closes #6224 Closes #10383
* Trim L2ARCGeorge Amanakis2020-06-091-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The l2arc_evict() function is responsible for evicting buffers which reference the next bytes of the L2ARC device to be overwritten. Teach this function to additionally TRIM that vdev space before it is overwritten if the device has been filled with data. This is done by vdev_trim_simple() which trims by issuing a new type of TRIM, TRIM_TYPE_SIMPLE. We also implement a "Trim Ahead" feature. It is a zfs module parameter, expressed in % of the current write size. This trims ahead of the current write size. A minimum of 64MB will be trimmed. The default is 0 which disables TRIM on L2ARC as it can put significant stress to underlying storage devices. To enable TRIM on L2ARC we set l2arc_trim_ahead > 0. We also implement TRIM of the whole cache device upon addition to a pool, pool creation or when the header of the device is invalid upon importing a pool or onlining a cache device. This is dependent on l2arc_trim_ahead > 0. TRIM of the whole device is done with TRIM_TYPE_MANUAL so that its status can be monitored by zpool status -t. We save the TRIM state for the whole device and the time of completion on-disk in the header, and restore these upon L2ARC rebuild so that zpool status -t can correctly report them. Whole device TRIM is done asynchronously so that the user can export of the pool or remove the cache device while it is trimming (ie if it is too slow). We do not TRIM the whole device if persistent L2ARC has been disabled by l2arc_rebuild_enabled = 0 because we may not want to lose all cached buffers (eg we may want to import the pool with l2arc_rebuild_enabled = 0 only once because of memory pressure). If persistent L2ARC has been disabled by setting the module parameter l2arc_rebuild_blocks_min_l2size to a value greater than the size of the cache device then the whole device is trimmed upon creation or import of a pool if l2arc_trim_ahead > 0. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Adam D. Moss <[email protected]> Signed-off-by: George Amanakis <[email protected]> Closes #9713 Closes #9789 Closes #10224
* ztest: Fix spa_open() ENOENT failuresBrian Behlendorf2020-06-061-142/+154
| | | | | | | | | | | | | | The pool may not be imported when the previous pass is terminated. In which case, spa_open() will return ENOENT to indicate the pool is not currently imported. Refactor to code slightly to handle this case by importing the pool and then retrying the spa_open(). The ztest_import() function was moved before ztest_run() and the import logic split in to a small internal helper function. The ztest_freeze() function was also moved but no changes were made. Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10407
* ztest: Fix ztest_run_zdb() failureBrian Behlendorf2020-05-291-2/+2
| | | | | | | | | | | | | | | | | | | It's possible for ztest to be killed while the pool is exported which results in an empty cache file. This is a valid state to test, but the validation check performed by ztest_run_zdb() depends on the pool being in the cache file. If it's not the following error is printed. zdb -bccsv -G -d -Y -U /tmp/zloop-run/zpool.cache ztest zdb: can't open '/tmp/zloop-run': No such file or directory Resolve these failures by removing the dependency on the cache file. Functionally, we only care that the pool can be imported and that the zdb verification passes. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10385
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 22:39:29 +0000