aboutsummaryrefslogtreecommitdiffstats
path: root/cmd/zpool
Commit message (Collapse)AuthorAgeFilesLines
* Defer new resilvers until the current one endsTom Caputi2018-10-181-6/+52
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, if a resilver is triggered for any reason while an existing one is running, zfs will immediately restart the existing resilver from the beginning to include the new drive. This causes problems for system administrators when a drive fails while another is already resilvering. In this case, the optimal thing to do to reduce risk of data loss is to wait for the current resilver to end before immediately replacing the second failed drive, which allows the system to operate with two incomplete drives for the minimum amount of time. This patch introduces the resilver_defer feature that essentially does this for the admin without forcing them to wait and monitor the resilver manually. The change requires an on-disk feature since we must mark drives that are part of a deferred resilver in the vdev config to ensure that we do not assume they are done resilvering when an existing resilver completes. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: @mmaybee Signed-off-by: Tom Caputi <[email protected]> Closes #7732
* zpool: allow sharing of spare device among poolsLOLi2018-10-171-2/+7
| | | | | | | | | | | ZFS allows, by default, sharing of spare devices among different pools; this commit simply restores this functionality for disk devices and adds an additional tests case to the ZFS Test Suite to prevent future regression. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #7999
* Print "(repairing)" in zpool status againTony Hutter2018-10-091-2/+6
| | | | | | | | | | | | | | | | | | | | Historically, zpool status prints "(repairing)" for any drives that have errors during a scrub: NAME STATE READ WRITE CKSUM mypool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /tmp/file1 ONLINE 13 0 0 (repairing) /tmp/file2 ONLINE 0 0 0 /tmp/file3 ONLINE 0 0 0 This was accidentally broken in "OpenZFS 9166 - zfs storage pool checkpoint" (d2734cc). This patch adds it back in. Reviewed-by: Serapheim Dimitropoulos <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #7779 Closes #7978
* Zpool iostat: remove latency/queue scalingGregor Kopka2018-09-251-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bandwidth and iops are average per second while *_wait are averages per request for latency or, for queue depths, an instantaneous measurement at the end of an interval (according to man zpool). When calculating the first two it makes sense to do x/interval_duration (x being the increase in total bytes or number of requests over the duration of the interval, interval_duration in seconds) to 'scale' from amount/interval_duration to amount/second. But applying the same math for the latter (*_wait latencies/queue) is wrong as there is no interval_duration component in the values (these are time/requests to get to average_time/request or already an absulute number). This bug leads to the only correct continuous *_wait figures for both latencies and queue depths from 'zpool iostat -l/q' being with duration=1 as then the wrong math cancels itself (x/1 is a nop). This removes temporal scaling from latency and queue depth figures. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Gregor Kopka <[email protected]> Closes #7945 Closes #7694
* zpool should detect invalid fs property on createLOLi2018-09-131-4/+11
| | | | | | | | | | | This change improve the handling of invalid filesystem properties when specified at pool creation: this is useful when 'zpool create -n' (dry run) is executed to detect invalid fs-level options (-O) before the actual command is run. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #7620 Closes #7878
* Pool allocation classesDon Brady2018-09-052-91/+307
| | | | | | | | | | | | | | | | | | | | Allocation Classes add the ability to have allocation classes in a pool that are dedicated to serving specific block categories, such as DDT data, metadata, and small file blocks. A pool can opt-in to this feature by adding a 'special' or 'dedup' top-level VDEV. Reviewed by: Pavel Zakharov <[email protected]> Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Alek Pinchuk <[email protected]> Reviewed-by: Håkan Johansson <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: DHE <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: Gregor Kopka <[email protected]> Reviewed-by: Kash Pande <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matthew Ahrens <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #5182
* Don't modify argv[] in user toolsDeHackEd2018-08-201-2/+16
| | | | | | | | | | | | argv[] gets modified during string parsing for input arguments. This is reflected in the live process listing. Don't do that. Reviewed-by: Serapheim Dimitropoulos <[email protected]> Reviewed-by: loli10K <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: DHE <[email protected]> Closes #7760
* OpenZFS 9580 - Add a hash-table on top of nvlist to speed-up operationsSerapheim Dimitropoulos2018-07-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | = Motivation While dealing with another performance issue (see 126118f) we noticed that we spend a lot of time in various places in the kernel when constructing long nvlists. The problem is that when an nvlist is created with the NV_UNIQUE_NAME set (which is the case most of the time), we do a linear search through the whole list to ensure uniqueness for every entry we add. An example of the above scenario can be seen in the following flamegraph, where more than have the time of the zfsdev_ioctl() is spent on constructing nvlists. Flamegraph: https://sdimitro.github.io/img/flame/sdimitro_snap_unmount3.svg Adding a table to speed up lookups will help situations where we just construct an nvlist (like the scenario above), in addition to regular lookups and removals. = What this patch does In this diff we've implemented a hash-table on top of the nvlist code that converts most nvlist operations from O(# number of entries) to O(1)* (the start is for amortized time as the hash-table grows and shrinks depending on the # of entries - plain lookup is strictly O(1)). = Performance Analysis To analyze the performance improvement I just used the setup from the snapshot deletion issue mentioned above in the Motivation section. Basically I created 10K filesystems with one snapshot each and then I just used the API of libZFS_Core to pass down an nvlist of all the snapshots to have them deleted. The reason I used my own driver program was to have clean performance results of what actually happens in the kernel. The flamegraphs and wall clock times mentioned below were gathered from the start to the end of the driver program's run. Between trials the testpool used was completely destroyed, the system was rebooted and the testpool was completely recreated. The reason for this dance was to get consistent results. == Results (before patch): === Sampling Flamegraphs [Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A.svg [Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2.svg [Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3.svg === Wall clock times (in seconds) ``` [Trial 4] real 5.3 user 0.4 sys 2.3 [Trial 5] real 8.2 user 0.4 sys 2.4 [Trial 6] real 6.0 user 0.5 sys 2.3 ``` == Results (after patch): === Sampling Flamegraphs [Trial 1] https://sdimitro.github.io/img/flame/DLPX-53417/trial-Ae.svg [Trial 2] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A2e.svg [Trial 3] https://sdimitro.github.io/img/flame/DLPX-53417/trial-A3e.svg === Wall clock times (in seconds) ``` [Trial 4] real 4.9 user 0.0 sys 0.9 [Trial 5] real 3.8 user 0.0 sys 0.9 [Trial 6] real 3.6 user 0.0 sys 0.9 ``` == Analysis The results between the trials are consistent so in this sections I will only talk about the flamegraph results from trial-1 and the wall-clock results from trial-4. From trial-1 we can see that zfs_dev_ioctl() goes from 2,331 to 996 samples counts. Specifically, the samples from fnvlist_add_nvlist() and spa_history_log_nvl() are almost gone (~500 & ~800 to 5 & 5 samples), leaving zfs_ioc_destroy_snaps() to dominate most samples from zfs_dev_ioctl(). From trial-4 we see that the user time dropped to 0 secods. I believe the consistent 0.4 seconds before my patch was applied was due to my driver program constructing the long nvlist of snapshots so it can pass it to the kernel. As for the system time, the effect there is more clear (2.3 down to 0.9 seconds). Porting Notes: * DATA_TYPE_DONTCARE case added to switch in fm_nvprintr() and zpool_do_events_nvprint(). Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Sebastien Roy <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/9580 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b5eca7b1 Closes #7748
* Default ashift for Amazon EC2 NVMe devicesTroels Nørgaard2018-07-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a default 4 KiB ashift for Amazon EC2 NVMe devices on instances with NVMe ephemeral devices, such as the types c5d, f1, i3 and m5d. As per the official documentation [1] a 4096 byte blocksize should be used to match the underlying hardware. The string was identified via: $ sudo sginfo -M /dev/nvme0n1 INQUIRY response (cmd: 0x12) ---------------------------- Device Type 0 Vendor: NVMe Product: Amazon EC2 NVMe Revision level: $ lsblk -io KNAME,TYPE,SIZE,MODEL KNAME TYPE SIZE MODEL nvme0n1 disk 442.4G Amazon EC2 NVMe Instance Storage [1] https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ storage-optimized-instances.html Retrived 2018-07-03 Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Troels Nørgaard <[email protected]> Closes #7676
* Fix missing option '-e' in zpool online usageLow-power2018-06-261-1/+1
| | | | | | Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: WHR <[email protected]> Closes #7655
* OpenZFS 9166 - zfs storage pool checkpointSerapheim Dimitropoulos2018-06-261-8/+207
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Richard Lowe <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
* Tunable directory for zfs runtime scriptsAntonio Russo2018-06-071-1/+1
| | | | | | | | | | | | | zpool and zed place scripts in subdirectories of libexecdir. Some distributions locate architecture independent scripts in other locations (e.g. Debian). To avoid these paths getting out of sync, centralize the definitions. Build zfs-test's default.cfg by Makefile. Use the new directory logic building tests/zfs-tests/include/default.cfg.in. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Antonio Russo <[email protected]> Closes #7597
* Add pool state /proc entry, "SUSPENDED" poolsTony Hutter2018-06-061-1/+2
| | | | | | | | | | | | | | | | | | | 1. Add a proc entry to display the pool's state: $ cat /proc/spl/kstat/zfs/tank/state ONLINE This is done without using the spa config locks, so it will never hang. 2. Fix 'zpool status' and 'zpool list -o health' output to print "SUSPENDED" instead of "ONLINE" for suspended pools. Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Richard Elling <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #7331 Closes #7563
* OpenZFS 9235 - rename zpool_rewind_policy_t to zpool_load_policy_tPavel Zakharov2018-06-041-4/+7
| | | | | | | | | | | | | | | | | | | | | | | We want to be able to pass various settings during import/open of a pool, which are not only related to rewind. Instead of adding a new policy and duplicate a bunch of code, we should just rename rewind_policy to a more generic term like load_policy. For instance, we'd like to set spa->spa_import_flags from the nvlist, rather from a flags parameter passed to spa_import as in some cases we want those flags not only for the import case, but also for the open case. One such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb) which would allow zfs to open a pool when logs are missing. Authored by: Pavel Zakharov <[email protected]> Reviewed by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Approved by: Robert Mustacchi <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://illumos.org/issues/9235 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d2b1e44 Closes #7532
* OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recoveryPavel Zakharov2018-05-081-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes: 7638 Refactor spa_load_impl into several functions 8961 SPA load/import should tell us why it failed 7277 zdb should be able to print zfs_dbgmsg's To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened. The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned. The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened. When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs. This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition. With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss of data, this feature is for now restricted to a read-only import. Porting notes (ZTS): * Fix 'make dist' target in zpool_import * The maximum path length allowed by tar is 99 characters. Several of the new test cases exceeded this limit resulting in them not being included in the tarball. Shorten the names slightly. * Set/get tunables using accessor functions. * Get last synced txg via the "zfs_txg_history" mechanism. * Clear zinject handlers in cleanup for import_cache_device_replaced and import_rewind_device_replaced in order that the zpool can be exported if there is an error. * Increase FILESIZE to 8G in zfs-test.sh to allow for a larger ext4 file system to be created on ZFS_DISK2. Also, there's no need to partition ZFS_DISK2 at all. The partitioning had already been disabled for multipath devices. Among other things, the partitioning steals some space from the ext4 file system, makes it difficult to accurately calculate the paramters to parted and can make some of the tests fail. * Increase FS_SIZE and FILE_SIZE in the zpool_import test configuration now that FILESIZE is larger. * Write more data in order that device evacuation take lonnger in a couple tests. * Use mkdir -p to avoid errors when the directory already exists. * Remove use of sudo in import_rewind_config_changed. Authored by: Pavel Zakharov <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Andrew Stormont <[email protected]> Approved by: Hans Rosenfeld <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://illumos.org/issues/9075 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123 Closes #7459
* OpenZFS 7614, 9064 - zfs device evacuation/removalMatthew Ahrens2018-04-141-14/+193
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <[email protected]> Reviewed-by: Alex Reece <[email protected]> Reviewed-by: George Wilson <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Prakash Surya <[email protected]> Reviewed by: Richard Laager <[email protected]> Reviewed by: Tim Chase <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported-by: Tim Chase <[email protected]> Signed-off-by: Tim Chase <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
* Report pool suspended due to MMPOlaf Faaland2018-03-151-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | When the pool is suspended, record whether it was due to an I/O error or due to MMP writes failing to succeed within the required time. Change spa_suspended from uint8_t to zio_suspend_reason_t to store the reason. When userspace queries pool status via spa_tryimport(), report the reason the pool was suspended in a new key, ZPOOL_CONFIG_SUSPENDED_REASON. In libzfs, when interpreting the returned config nvlist, report suspension due to MMP with a new pool status enum value, ZPOOL_STATUS_IO_FAILURE_MMP. In status_callback(), which generates and emits the message when 'zpool status' is executed, add a case to print an appropriate message for the new pool status enum value. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #7296
* Change functions which return literals to return `const char*`Tomohiro Kusumi2018-03-091-1/+1
| | | | | | | | | | | | | | get_format_prompt_string() and zpool_state_to_name() return a string literal which is read-only, thus they should return `const char*`. zpool_get_prop_string() returns a non-const string after successful nv-lookup, and returns a string literal otherwise. Since this function is designed to be used for read-only purpose, the return type should also be `const char*`. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tomohiro Kusumi <[email protected]> Closes #7285
* Add SMART self-test results to zpool status -cTony Hutter2018-02-277-18/+133
| | | | | | | | | | | | | Add in SMART self-test results to zpool status|iostat -c. This works for both SAS and SATA drives. Also, add plumbing to allow the 'smart' script to take smartctl output from a directory of output text files instead of running it against the vdevs. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #7178
* Add SMART attributes for SSD and NVMebunder20152018-02-213-2/+24
| | | | | | | | | | | | This adds the SMART attributes required to probe Samsung SSD and NVMe (and possibly others) disks when using the "zpool status -c" command. Reviewed-by: loli10K <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: bunder2015 <[email protected]> Closes #7183 Closes #7193
* OpenZFS 7431 - ZFS Channel ProgramsChris Williamson2018-02-081-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Authored by: Chris Williamson <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: John Kennedy <[email protected]> Reviewed by: Dan Kimmel <[email protected]> Approved by: Garrett D'Amore <[email protected]> Ported-by: Don Brady <[email protected]> Ported-by: John Kennedy <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/7431 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533 Porting Notes: * The CLI long option arguments for '-t' and '-m' don't parse on linux * Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc * Lua implementation is built as its own module (zlua.ko) * Lua headers consumed directly by zfs code moved to 'include/sys/lua/' * There is no native setjmp/longjump available in stock Linux kernel. Brought over implementations from illumos and FreeBSD * The get_temporary_prop() was adapted due to VFS platform differences * Use of inline functions in lua parser to reduce stack usage per C call * Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
* Fix `zpool status` overflow on fast scrubsDeHackEd2018-02-061-1/+1
| | | | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Richard Elling <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: DHE <[email protected]> Closes #7133
* Encryption Stability and On-Disk Format FixesTom Caputi2018-02-021-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The on-disk format for encrypted datasets protects not only the encrypted and authenticated blocks themselves, but also the order and interpretation of these blocks. In order to make this work while maintaining the ability to do raw sends, the indirect bps maintain a secure checksum of all the MACs in the block below it along with a few other fields that determine how the data is interpreted. Unfortunately, the current on-disk format erroneously includes some fields which are not portable and thus cannot support raw sends. It is not possible to easily work around this issue due to a separate and much smaller bug which causes indirect blocks for encrypted dnodes to not be compressed, which conflicts with the previous bug. In addition, the current code generates incompatible on-disk formats on big endian and little endian systems due to an issue with how block pointers are authenticated. Finally, raw send streams do not currently include dn_maxblkid when sending both the metadnode and normal dnodes which are needed in order to ensure that we are correctly maintaining the portable objset MAC. This patch zero's out the offending fields when computing the bp MAC and ensures that these MACs are always calculated in little endian order (regardless of the host system's byte order). This patch also registers an errata for the old on-disk format, which we detect by adding a "version" field to newly created DSL Crypto Keys. We allow datasets without a version (version 0) to only be mounted for read so that they can easily be migrated. We also now include dn_maxblkid in raw send streams to ensure the MAC can be maintained correctly. This patch also contains minor bug fixes and cleanups. Reviewed-by: Jorgen Lundman <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #6845 Closes #6864 Closes #7052
* Fix style issues in man pages and commands helpLOLi2018-01-291-2/+4
| | | | | | | | | | | | | | * Remove 'zfs snap' from zfs help message (OpenZFS sync) * Update zfs(8) to suggest 'snap' can be used as an alias for 'snapshot' * Enforce 80 columns limit in help messages * Remove zfs_disable_dup_eviction from zfs-module-parameters(5) * Expose zfs_scan_max_ext_gap as a kernel module parameter. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tom Caputi <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #7087
* OpenZFS 8652 - Tautological comparisons with ZPROP_INVALBrian Behlendorf2018-01-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usr/src/uts/common/sys/fs/zfs.h Change ZPROP_INVAL and ZPROP_CONT from macros to enum values. Clang and GCC both prefer to use unsigned ints to store enums. That was causing tautological comparison warnings (and likely eliminating error handling code at compile time) whenever a zfs_prop_t or zpool_prop_t was compared to ZPROP_INVAL or ZPROP_CONT. Making the error flags be explicity enum values forces the enum types to be signed. ZPROP_INVAL was also compared against two different enum types. I had to change its name to ZPOOL_PROP_INVAL whenever its compared to a zpool_prop_t. There are still some places where ZPROP_INVAL or ZPROP_CONT is compared to a plain int, in code that doesn't know whether the int is storing a zfs_prop_t or a zpool_prop_t. usr/src/uts/common/fs/zfs/spa.c s/ZPROP_INVAL/ZPOOL_PROP_INVAL/ Authored by: Alan Somers <[email protected]> Approved by: Gordon Ross <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Igor Kozhukhov <[email protected]> Reviewed by: George Melikov <[email protected]> Ported-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/8652 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c2de80dc74 Closes #7061
* Fix unused variable warningsBrian Behlendorf2018-01-091-2/+0
| | | | | | | | | Resolved unused variable warnings observed after restricting -Wno-unused-but-set-variable to only libzfs and libzpool. Reviewed-by: DHE <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6941
* Fix 'zpool add' handling of nested interior VDEVsLOLi2017-12-281-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | When replacing a faulted device which was previously handled by a spare multiple levels of nested interior VDEVs will be present in the pool configuration; the following example illustrates one of the possible situations: NAME STATE READ WRITE CKSUM testpool DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 spare-0 DEGRADED 0 0 0 replacing-0 DEGRADED 0 0 0 /var/tmp/fault-dev UNAVAIL 0 0 0 cannot open /var/tmp/replace-dev ONLINE 0 0 0 /var/tmp/spare-dev1 ONLINE 0 0 0 /var/tmp/safe-dev ONLINE 0 0 0 spares /var/tmp/spare-dev1 INUSE currently in use This is safe and allowed, but get_replication() needs to handle this situation gracefully to let zpool add new devices to the pool. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #6678 Closes #6996
* Fix segfault in zpool iostat when adding VDEVsTony Hutter2017-12-061-7/+15
| | | | | | | | | | Fix a segfault when running 'zpool iostat -v 1' while adding a VDEV. Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #6748 Closes #6872
* Fix 'zpool create|add' replication level checkBrian Behlendorf2017-12-041-2/+5
| | | | | | | | | | | | | When the pool configuration contains a hole due to a previous device removal ignore this top level vdev. Failure to do so will result in the current configuration being assessed to have a non-uniform replication level and the expected warning will be disabled. The zpool_add_010_pos test case was extended to cover this scenario. Reviewed-by: George Melikov <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6907 Closes #6911
* Sequential scrub and resilversTom Caputi2017-11-151-57/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, scrubs and resilvers can take an extremely long time to complete. This is largely due to the fact that zfs scans process pools in logical order, as determined by each block's bookmark. This makes sense from a simplicity perspective, but blocks in zfs are often scattered randomly across disks, particularly due to zfs's copy-on-write mechanisms. This patch improves performance by splitting scrubs and resilvers into a metadata scanning phase and an IO issuing phase. The metadata scan reads through the structure of the pool and gathers an in-memory queue of I/Os, sorted by size and offset on disk. The issuing phase will then issue the scrub I/Os as sequentially as possible, greatly improving performance. This patch also updates and cleans up some of the scan code which has not been updated in several years. Reviewed-by: Brian Behlendorf <[email protected]> Authored-by: Saso Kiselkov <[email protected]> Authored-by: Alek Pinchuk <[email protected]> Authored-by: Tom Caputi <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #3625 Closes #6256
* Fix column alignment with long zpool namesGeorge G2017-11-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `zpool status` normally aligns NAME/STATE/etc columns: NAME STATE READ WRITE CKSUM dummy ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /tmp/dummy-long-1.bin ONLINE 0 0 0 /tmp/dummy-long-2.bin ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 /tmp/dummy-long-3.bin ONLINE 0 0 0 /tmp/dummy-long-4.bin ONLINE 0 0 0 However, if the zpool name is longer than the zvol names, alignment issues arise: NAME STATE READ WRITE CKSUM dummy-very-very-long-zpool-name ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 /tmp/dummy-1.bin ONLINE 0 0 0 /tmp/dummy-2.bin ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 /tmp/dummy-3.bin ONLINE 0 0 0 /tmp/dummy-4.bin ONLINE 0 0 0 `zpool iostat` and `zpool import` are also affected: capacity operations bandwidth pool alloc free read write read write ---------- ----- ----- ----- ----- ----- ----- dummy 104K 1.97G 0 0 152 9.84K dummy-very-very-long-zpool-name 152K 1.97G 0 1 144 13.1K ---------- ----- ----- ----- ----- ----- ----- dummy-very-very-long-zpool-name ONLINE mirror-0 ONLINE /tmp/dummy-1.bin ONLINE /tmp/dummy-2.bin ONLINE mirror-1 ONLINE /tmp/dummy-3.bin ONLINE /tmp/dummy-4.bin ONLINE Reviewed-by: George Melikov <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: George Gaydarov <[email protected]> Closes #6786
* Allow 'zpool events' filtering by pool nameLOLi2017-10-261-2/+28
| | | | | | | | | | | | | | Additionally add four new tests: * zpool_events_clear: verify 'zpool events -c' functionality * zpool_events_cliargs: verify command line options and arguments * zpool_events_follow: verify 'zpool events -f' * zpool_events_poolname: verify events filtering by pool name Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: loli10K <[email protected]> Closes #3285 Closes #6762
* Added no_scrub_restart flag to zpool reopenArkadiusz Bubała2017-10-261-21/+12
| | | | | | | | | | | | | | | | | | | | | | | Added -n flag to zpool reopen that allows a running scrub operation to continue if there is a device with Dirty Time Log. By default if a component device has a DTL and zpool reopen is executed all running scan operations will be restarted. Added functional tests for `zpool reopen` Tests covers following scenarios: * `zpool reopen` without arguments, * `zpool reopen` with pool name as argument, * `zpool reopen` while scrubbing, * `zpool reopen -n` while scrubbing, * `zpool reopen -n` while resilvering, * `zpool reopen` with bad arguments. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tom Caputi <[email protected]> Signed-off-by: Arkadiusz Bubała <[email protected]> Closes #6076 Closes #6746
* Use ashift=12 by default on SSDSC2BW48 disksadisbladis2017-10-231-0/+1
| | | | | | | | | Currently the 480GB models of this disk do not use ashift=12 by default. SSDSC2BW48 is also optimized for 4k blocks. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Signed-off-by: adisbladis <[email protected]> Closes #6774
* Fix coverity defects: CID 161388Tobin Harding2017-10-171-2/+4
| | | | | | | | | | CID 161388: Resource Leak (REASOURCE_LEAK) Jump to errout so that file descriptor gets closed before returning from function. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tobin C. Harding <[email protected]> Closes #6755
* Encryption patch follow-upTom Caputi2017-10-111-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * PBKDF2 implementation changed to OpenSSL implementation. * HKDF implementation moved to its own file and tests added to ensure correctness. * Removed libzfs's now unnecessary dependency on libzpool and libicp. * Ztest can now create and test encrypted datasets. This is currently disabled until issue #6526 is resolved, but otherwise functions as advertised. * Several small bug fixes discovered after enabling ztest to run on encrypted datasets. * Fixed coverity defects added by the encryption patch. * Updated man pages for encrypted send / receive behavior. * Fixed a bug where encrypted datasets could receive DRR_WRITE_EMBEDDED records. * Minor code cleanups / consolidation. Signed-off-by: Tom Caputi <[email protected]>
* Native Encryption for ZFS on LinuxTom Caputi2017-08-141-10/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Jorgen Lundman <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #494 Closes #5769
* Add libtpool (thread pools)Brian Behlendorf2017-08-095-34/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6442
* Fix zpool events scripted mode tab separatorSen Haerens2017-08-031-3/+6
| | | | | | | | | Reviewed-by: George Melikov <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Sen Haerens <[email protected]> Closes #6444 Closes #6445
* Add zgenhostid utility scriptOlaf Faaland2017-07-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Turning the multihost property on requires that a hostid be set to allow ZFS to determine when a foreign system is attemping to import a pool. The error message instructing the user to set a hostid refers to genhostid(1). Genhostid(1) is not available on SUSE Linux. This commit adds a script modeled after genhostid(1) for those users. Zgenhostid checks for an /etc/hostid file; if it does not exist, it creates one and stores a value. If the user has provided a hostid as an argument, that value is used. Otherwise, a random hostid is generated and stored. This differs from the CENTOS 6/7 versions of genhostid, which overwrite the /etc/hostid file even though their manpages state otherwise. A man page for zgenhostid is added. The one for genhostid is in (1), but I put zgenhostid in (8) because I believe it's more appropriate. The mmp tests are modified to use zgenhostid to set the hostid instead of using the spl_hostid module parameter. zgenhostid will not replace an existing /etc/hostid file, so new mmp_clear_hostid calls are required. Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #6358 Closes #6379
* Fix don't zero_label when replace with spareChunwei Chen2017-07-241-1/+2
| | | | | | | | | | | When replacing a disk with non-wholedisk spare, we shouldn't zero_label it. The wholedisk case already skip it. In fact, zero_label function will fail saying device busy because it's already opened exclusively, but since there's no error checking, the replace command will succeed, causing great confusion. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Closes #6369
* Restrict zpool iostat/status -c to search pathGiuseppe Di Natale2017-07-241-0/+3
| | | | | | | | | | | | | | zpool iostat/status -c is supposed to be restricted by its search path, but currently isn't. To prevent arbitrary scripts from being executed, disallow '/' from commands. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Ned Bass <[email protected]> Signed-off-by: Giuseppe Di Natale <[email protected]> Closes #6353 Closes #6359
* Fix coverity defects: CID 165757George Melikov2017-07-141-0/+1
| | | | | | | | CID 165757: Control flow issues (MISSING_BREAK) Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: George Melikov <[email protected]> Closes #6348
* Multi-modifier protection (MMP)Olaf Faaland2017-07-131-30/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Ned Bass <[email protected]> Reviewed-by: Andreas Dilger <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Olaf Faaland <[email protected]> Closes #745 Closes #6279
* Implemented zpool scrub pause/resumeAlek P2017-07-061-15/+45
| | | | | | | | | | | | | | | | | | Currently, there is no way to pause a scrub. Pausing may be useful when the pool is busy with other I/O to preserve bandwidth. This patch adds the ability to pause and resume scrubbing. This is achieved by maintaining a persistent on-disk scrub state. While the state is 'paused' we do not scrub any more blocks. We do however perform regular scan housekeeping such as freeing async destroyed and deadlist blocks while paused. Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: Thomas Caputi <[email protected]> Reviewed-by: Serapheim Dimitropoulos <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alek Pinchuk <[email protected]> Closes #6167
* Dashes for zero latency values in zpool iostat -pTony Hutter2017-06-221-1/+1
| | | | | | | | | | | | This prints dashes instead of zeros for zero latency values in 'zpool iostat -p'. You'll get zero latencies reported when the disk is idle, but technically a zero latency is invalid, since you can't measure the latency of doing nothing. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Giuseppe Di Natale <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #6210
* Allow add of raidz and mirror with same redundancyHåkan Johansson2017-06-051-1/+16
| | | | | | | | | | | | | | | Allow new members to be added to a pool mixing raidz and mirror vdevs without giving -f, as long as they have matching redundancy. This case was missed in #5915, which only handled zpool create. Add zfstest zpool_add_010_pos.ksh, with test of zpool create followed by zpool add of mixed raidz and mirror vdevs. Add some more mixed raidz and mirror cases to zpool_create_006_pos.ksh. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Haakan Johansson <[email protected]> Issue #5915 Closes #6181
* zpool iostat/status -c improvementsGiuseppe Di Natale2017-06-0526-38/+313
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Users can now provide their own scripts to be run with 'zpool iostat/status -c'. User scripts should be placed in ~/.zpool.d to be included in zpool's default search path. Provide a script which can be used with 'zpool iostat|status -c' that will return the type of device (hdd, sdd, file). Provide a script to get various values from smartctl when using 'zpool iostat/status -c'. Allow users to define the ZPOOL_SCRIPTS_PATH environment variable which can be used to override the default 'zpool iostat/status -c' search path. Allow the ZPOOL_SCRIPTS_ENABLED environment variable to enable or disable 'zpool status/iostat -c' functionality. Use the new smart script to provide the serial command. Install /etc/sudoers.d/zfs file which contains the sudoer rule for smartctl as a sample. Allow 'zpool iostat/status -c' tests to run in tree. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Giuseppe Di Natale <[email protected]> Closes #6121 Closes #6153
* Implemented zpool sync commandAlek P2017-05-191-0/+46
| | | | | | | | | | | This addition will enable us to sync an open TXG to the main pool on demand. The functionality is similar to 'sync(2)' but 'zpool sync' will return when data has hit the main storage instead of potentially just the ZIL as is the case with the 'sync(2)' cmd. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Signed-off-by: Alek Pinchuk <[email protected]> Closes #6122
* Force fault a vdev with 'zpool offline -f'Tony Hutter2017-05-191-8/+23
| | | | | | | | | | | | | This patch adds a '-f' option to 'zpool offline' to fault a vdev instead of bringing it offline. Unlike the OFFLINE state, the FAULTED state will trigger the FMA code, allowing for things like autoreplace and triggering the slot fault LED. The -f faults persist across imports, unless they were set with the temporary (-t) flag. Both persistent and temporary faults can be cleared with zpool clear. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #6094
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 08:38:43 +0000