summaryrefslogtreecommitdiffstats
path: root/cmd/zinject
Commit message (Collapse)AuthorAgeFilesLines
* Multiple DVA Scrubbing FixTom Caputi2019-03-151-14/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there is an issue in the sequential scrub code which prevents self healing from working in some cases. The scrub code will split up all DVA copies of a bp and issue each of them separately. The problem is that, since each of the DVAs is no longer associated with the others, the self healing code doesn't have the opportunity to repair problems that show up in one of the DVAs with the data from the others. This patch fixes this issue by ensuring that all IOs issued by the sequential scrub code include all DVAs. Initially, only the first DVA of each is attempted. If an issue arises, the IO is retried with all available copies, giving the self healing code a chance to correct the issue. To test this change, this patch also adds the ability for zinject to specify individual DVAs to inject read errors into. We then add a new test case that utilizes this functionality to ensure scrubs and self-healing reads can handle and transparently fix issues with individual copies of blocks. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #8453
* Add libzutil for libzfs or libzpool consumersDon Brady2018-11-053-112/+19
| | | | | | | | | | | Adds a libzutil for utility functions that are common to libzfs and libzpool consumers (most of what was in libzfs_import.c). This removes the need for utilities to link against both libzpool and libzfs. Reviewed-by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #8050
* OpenZFS 9403 - assertion failed in arc_buf_destroy()Tom Caputi2018-08-291-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assertion failed in arc_buf_destroy() when concurrently reading block with checksum error. Porting notes: * The ability to zinject decompression errors has been added, but this only works at the zio_decompress() level, where we have all of the info we need to match against the user's zinject options. * The decompress_fault test has been added to test the new zinject functionality * We attempted to set zio_decompress_fail_fraction to (1 << 18) in ztest for further test coverage. Although this did uncover a few low priority issues, this unfortuantely also causes ztest to ASSERT in many locations where the code is working correctly since it is designed to fail on IO errors. Developers can manually set this variable with the '-o' option to find and debug issues. Authored by: Matt Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Pavel Zakharov <[email protected]> Reviewed by: Brian Behlendorf <[email protected]> Approved by: Matt Ahrens <[email protected]> Ported-by: Tom Caputi <[email protected]> OpenZFS-issue: https://illumos.org/issues/9403 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/fa98e487a9 Closes #7822
* Add support for decryption faults in zinjectTom Caputi2018-05-021-6/+26
| | | | | | | | | | | | | | This patch adds the ability for zinject to trigger decryption and authentication faults in the ZIO and ARC layers. This functionality is exposed via the new "decrypt" error type, which may be provided for "data" object types. This patch also refactors some of the core encryption / decryption functions so that they have consistent prototypes, handle errors consistently, and do not have unused arguments. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #7474
* Add corruption failure option to zinject(8)Don Brady2017-08-141-10/+24
| | | | | | | | | | | Added a 'corrupt' error option that will flip a bit in the data after a read operation. This is useful for generating checksum errors at the device layer (in a mirror config for example). It is also used to validate the diagnosis of checksum errors from the zfs diagnosis engine. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #6345
* Native Encryption for ZFS on LinuxTom Caputi2017-08-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Jorgen Lundman <[email protected]> Signed-off-by: Tom Caputi <[email protected]> Closes #494 Closes #5769
* Add libtpool (thread pools)Brian Behlendorf2017-08-091-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #6442
* Inject zinject(8) a percentage amount of dev errsDon Brady2017-06-161-10/+38
| | | | | | | | | | | In the original form of device error injection, it was an all or nothing situation. To help simulate intermittent error conditions, you can now specify a real number percentage value. This is also very useful for our ZFS fault diagnosis testing and for injecting intermittent errors during load testing. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #6227
* Fix spellingka72017-01-032-2/+2
| | | | | | | | | Reviewed-by: Brian Behlendorf <[email protected] Reviewed-by: Giuseppe Di Natale <[email protected]>> Reviewed-by: George Melikov <[email protected]> Reviewed-by: Haakan T Johansson <[email protected]> Closes #5547 Closes #5543
* Use cstyle -cpP in `make cstyle` checkBrian Behlendorf2016-12-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <[email protected]> Reviewed-by: Håkan Johansson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #5465
* Fix coverity defects: CID 147443, 147656, 147655, 147441, 147653BearBabyLiu2016-09-291-1/+1
| | | | | | | | | | | | coverity scan CID:147443, Type: Buffer not null terminated coverity scan CID:147656, Type: Copy into fixed size buffer coverity scan CID:147655, Type: Copy into fixed size buffer coverity scan CID:147441, Type: Buffer not null terminated coverity scan CID:147653, Type: Copy into fixed size buffer Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: liuhuang <[email protected]> Closes #5165
* Fix coverity defectsluozhengzheng2016-09-221-11/+54
| | | | | | | | | | | | | | | | | | | | | | | 1.coverity scan CID:147445 function zfs_do_send in zfs_main.c Buffer not null terminated (BUFFER_SIZE_WARNING) 2.coverity scan CID:147443 function zfs_do_bookmark in zfs_main.c Buffer not null terminated (BUFFER_SIZE_WARNING) 3.coverity scan CID:147660 function main in zinject.c Passing string argv[0] of unknown size to strcpy By the way, the leak of g_zfs is fixed. 4.coverity scan CID: 147442 function make_disks in zpool_vdev.c Buffer not null terminated (BUFFER_SIZE_WARNING) 5.coverity scan CID: 147661 function main in dir_rd_update.c passing string cp1 of unknown size to strcpy Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: luozhengzheng <[email protected]> Closes #5130
* Fix coverity defectscao2016-09-201-0/+2
| | | | | | | | | | | | | | | | Fix coverity defects: coverity scan CID:147623, Type: Resource leak. coverity scan CID:147622, Type: Resource leak. reason: zpool_open zhp, but not zpool_close zhp. so resource leak. coverity scan CID:147621, Type: Resource fd leak. coverity scan CID:147620, Type: Resource fd leak. reason: do_write do_read open file fd,but exception not close fd. delete unuse definition DMU_OS_IS_L2COMPRESSIBLE. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: cao.xuewen <[email protected]> Closes #5137
* Change /etc/mtab to /proc/self/mountsslashdd2016-09-201-1/+1
| | | | | | | | | | | Fix misleading error message: "The /dev/zfs device is missing and must be created.", if /etc/mtab is missing. Reviewed-by: Richard Laager <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Eric Desrochers <[email protected]> Closes #4680 Closes #5029
* Fixes for issues found with cppcheck toolGvozden Neskovic2016-07-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixes small number of errors/false positives reported by `cppcheck`, static analysis tool for C/C++. cppcheck 1.72 $ cppcheck . --force --quiet [cmd/zfs/zfs_main.c:4444]: (error) Possible null pointer dereference: who_perm [cmd/zfs/zfs_main.c:4445]: (error) Possible null pointer dereference: who_perm [cmd/zfs/zfs_main.c:4446]: (error) Possible null pointer dereference: who_perm [cmd/zpool/zpool_iter.c:317]: (error) Uninitialized variable: nvroot [cmd/zpool/zpool_vdev.c:1526]: (error) Memory leak: child [lib/libefi/rdwr_efi.c:1118]: (error) Memory leak: efi_label [lib/libuutil/uu_misc.c:207]: (error) va_list 'args' was opened but not closed by va_end(). [lib/libzfs/libzfs_import.c:1554]: (error) Dangerous usage of 'diskname' (strncpy doesn't always null-terminate it). [lib/libzfs/libzfs_sendrecv.c:3279]: (error) Dereferencing 'cp' after it is deallocated / released [tests/zfs-tests/cmd/file_write/file_write.c:154]: (error) Possible null pointer dereference: operation [tests/zfs-tests/cmd/randfree_file/randfree_file.c:90]: (error) Memory leak: buf [cmd/zinject/zinject.c:1068]: (error) Uninitialized variable: dataset [module/icp/io/sha2_mod.c:698]: (error) Uninitialized variable: blocks_per_int64 Signed-off-by: Gvozden Neskovic <[email protected]> Signed-off-by: Chunwei Chen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #1392
* Fix minor spelling mistakesColin Ian King2016-06-061-2/+2
| | | | | | | | | | | Trivial spelling mistake fix in error message text. * Fix spelling mistake "adminstrator" -> "administrator" * Fix spelling mistake "specificed" -> "specified" * Fix spelling mistake "interperted" -> "interpreted" Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #4728
* OpenZFS 6531 - Provide mechanism to artificially limit disk performanceTony Hutter2016-05-261-3/+105
| | | | | | | | | | | | | | | | | | | Reviewed by: Paul Dagnelie <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Reviewed by: George Wilson <[email protected]> Approved by: Dan McDonald <[email protected]> Ported by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> OpenZFS-issue: https://www.illumos.org/issues/6531 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130 Porting notes: - Added new IO delay tracepoints, and moved common ZIO tracepoint macros to a new trace_common.h file. - Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function. - Updated zinject man page - Updated zpool_scrub test files
* Support parallel build trees (VPATH builds)Turbo Fredriksson2015-07-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #1082
* Add libzfs_error_init() functionBrian Behlendorf2015-05-221-1/+3
| | | | | | | | | | | | | | All fprintf() error messages are moved out of the libzfs_init() library function where they never belonged in the first place. A libzfs_error_init() function is added to provide useful error messages for the most common causes of failure. Additionally, in libzfs_run_process() the 'rc' variable was renamed to 'error' for consistency with the rest of the code base. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chris Dunlap <[email protected]> Signed-off-by: Richard Yao <[email protected]>
* Make command line guid parsing more tolerantBrian Behlendorf2014-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Several of the zfs utilities allow you to pass a vdev's guid rather than the device name. However, the utilities are not consistent in how they parse that guid. For example, 'zinject' expects the guid to be passed as a hex value while 'zpool replace' wants it as a decimal. The user is forced to just know what format to use. This patch improve things by making the parsing more tolerant. When strtol(3) is called using 0 for the base, rather than say 10 or 16, it will then accept hex, decimal, or octal input based on the prefix. From the man page. If base is zero or 16, the string may then include a "0x" prefix, and the number will be read in base 16; otherwise, a zero base is taken as 10 (decimal) unless the next character is '0', in which case it is taken as 8 (octal). NOTE: There may be additional conversions not caught be this patch. Signed-off-by: Brian Behlendorf <[email protected]> Signed-off-by: Chris Dunlap <[email protected]> Issue #2
* Illumos #3120 zinject hangs in zfsdev_ioctl() due to uninitialized zcYuri Pankov2014-03-241-7/+5
| | | | | | | | | | | | | | | | 3120 zinject hangs in zfsdev_ioctl() due to uninitialized zc Reviewed by: Richard Lowe <[email protected]> Reviewed by: Eric Schrock <[email protected]> Reviewed by: Matthew Ahrens <[email protected]> Approved by: Richard Lowe <[email protected]> References: https://www.illumos.org/issues/3120 illumos/illumos-gate@f4c46b1eda9212fd32ba197043d52239ef5c0a7f Ported-by: Brian Behlendorf <[email protected]> Closes #2152
* Add missing libzfs_core to MakefilesMaximilian Mehnert2013-11-201-1/+2
| | | | | | | | | | | | On some platforms symbols provided by libzfs_core and used by libzfs were not available to the linker. To avoid this issue libzfs_core has been added to the list of required libraries when building utilities which depend on libzfs. This should have been handled properly by libtool and it's still not entirely clear why it wasn't on all platforms. Signed-off-by: Brian Behlendorf <[email protected]> Closes #1841
* Generate libraries with correct DT_NEEDED entriesRichard Yao2013-10-101-2/+0
| | | | | | | | | | | | | | | | | | | | Libraries that depend on other libraries should list them in ELF's DT_NEEDED field so that programs linking to them do not need to specify those libraries unless they depend on them as well. This is not the case in the current code and the consequence is that anything that needs a library must know its dependencies. This is fragile and caused GRUB2's configure script to break when a dependency was added on libblkid in libzfs. This resolves that problem by using LIBADD/LDADD to specify libraries in Makefile.am instead of LDFLAGS. This ensures that proper DT_NEEDED entries are generated and prevents GRUB2's configure script from breaking in the presence of a libblkid dependency. This also removes unneeded dependencies from various files. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #1751
* Use setmntent() OR fopen()Turbo Fredriksson2013-08-151-0/+4
| | | | | | | | For the same reasons it's used in libzfs_init(), this was just overlooked because zinject gets minimal use. Signed-off-by: Brian Behlendorf <[email protected]> Issue #1498
* Fix zinject list handlersBrian Behlendorf2013-05-011-10/+10
| | | | | | | | The zfs_fd must be opened before calling print_all_handlers() or the ioctl() cannot be used to the zfs control device. This brings the zinject code back in sync with the Illumos implementation. Signed-off-by: Brian Behlendorf <[email protected]>
* 3246 ZFS I/O deadman threadGeorge.Wilson2013-05-012-11/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reviewed by: Matt Ahrens <[email protected]> Reviewed by: Eric Schrock <[email protected]> Reviewed by: Christopher Siden <[email protected]> Approved by: Garrett D'Amore <[email protected]> NOTES: This patch has been reworked from the original in the following ways to accomidate Linux ZFS implementation *) Usage of the cyclic interface was replaced by the delayed taskq interface. This avoids the need to implement new compatibility code and allows us to rely on the existing taskq implementation. *) An extern for zfs_txg_synctime_ms was added to sys/dsl_pool.h because declaring externs in source files as was done in the original patch is just plain wrong. *) Instead of panicing the system when the deadman triggers a zevent describing the blocked vdev and the first pending I/O is posted. If the panic behavior is desired Linux provides other generic methods to panic the system when threads are observed to hang. *) For reference, to delay zios by 30 seconds for testing you can use zinject as follows: 'zinject -d <vdev> -D30 <pool>' References: illumos/illumos-gate@283b84606b6fc326692c03273de1774e8c122f9a https://www.illumos.org/issues/3246 Ported-by: Brian Behlendorf <[email protected]> Closes #1396
* Remove autotools productsBrian Behlendorf2012-08-271-712/+0
| | | | | | | | Remove all of the generated autotools products from the repository and update the .gitignore files accordingly. Signed-off-by: Brian Behlendorf <[email protected]> Closes #718
* Set zvol discard_granularity to the volblocksize.Etienne Dechamps2012-08-071-0/+1
| | | | | | | | | | | | | | | | | | Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <[email protected]> Closes #862
* Linux 3.5 compat, end_writeback() changed to clear_inode()Richard Yao2012-07-231-0/+1
| | | | | | | | | | | | | | | | The end_writeback() function was changed by moving the call to inode_sync_wait() earlier in to evict(). This effecitvely changes the ordering of the sync but it does not impact the details of the zfs implementation. However, as part of this change end_writeback() was renamed to clear_inode() to reflect the new semantics. This change does impact us and clear_inode() now maps to end_writeback() for kernels prior to 3.5. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #784
* Linux 3.5 compat, iops->truncate_range() removedRichard Yao2012-07-231-0/+1
| | | | | | | | | The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #784
* Linux 3.5 compat, eops->encode_fh() takes inodesRichard Yao2012-07-231-0/+1
| | | | | | | | | | | | | | The export_operations member ->encode_fh() has been updated to take both the child and parent inodes. This interface used to take the child dentry and a bool describing if the parent is needed. NOTE: While updating this code I noticed that we do not currently cleanly handle the case where we're passed a connectable parent. This code should be audited to make sure we're doing the right thing. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #784
* Move partition scanning from userspace to module.Etienne Dechamps2012-07-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, zpool online -e (dynamic vdev expansion) doesn't work on whole disks because we're invoking ioctl(BLKRRPART) from userspace while ZFS still has a partition open on the disk, which results in EBUSY. This patch moves the BLKRRPART invocation from the zpool utility to the module. Specifically, this is done just before opening the device in vdev_disk_open() which is called inside vdev_reopen(). This requires jumping through some hoops to get to the disk device from the partition device, and to make sure we can still open the partition after the BLKRRPART call. Note that this new code path is triggered on dynamic vdev expansion only; other actions, like creating a new pool, are unchanged and still call BLKRRPART from userspace. This change also depends on API changes which are available in 2.6.37 and latter kernels. The build system has been updated to detect this, but there is no compatibility mode for older kernels. This means that online expansion will NOT be available in older kernels. However, it will still be possible to expand the vdev offline. Signed-off-by: Brian Behlendorf <[email protected]> Closes #808
* Linux 3.4 compat, d_make_root() replaces d_alloc_root()Richard Yao2012-06-111-0/+1
| | | | | | | | | | | | | | | | | | | | torvalds/linux@adc0e91ab142abe93f5b0d7980ada8a7676231fe introduced introduced d_make_root() as a replacement for d_alloc_root(). Further commits appear to have removed d_alloc_root() from the Linux source tree. This causes the following failure: error: implicit declaration of function 'd_alloc_root' [-Werror=implicit-function-declaration] To correct this we update the code to use the current d_make_root() interface for readability. Then we introduce an autotools check to determine if d_make_root() is available. If it isn't then we define some compatibility logic which used the older d_alloc_root() interface. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #776
* Linux 3.3 compat, iops->create()/mkdir()/mknod()Brian Behlendorf2012-04-301-0/+1
| | | | | | | | | | The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <[email protected]> Closes #701
* Add --enable-debug-dmu-tx configure optionBrian Behlendorf2012-03-231-0/+1
| | | | | | | | | | | | | | | | | | Allow rigorous (and expensive) tx validation to be enabled/disabled indepentantly from the standard zfs debugging. When enabled these checks ensure that all txs are constructed properly and that a dbuf is never dirtied without taking the correct tx hold. This checking is particularly helpful when adding new dmu consumers like Lustre. However, for established consumers such as the zpl with no known outstanding tx construction problems this is just overhead. --enable-debug-dmu-tx - Enable/disable validation of each tx as --disable-debug-dmu-tx it is constructed. By default validation is disabled due to performance concerns. Signed-off-by: Brian Behlendorf <[email protected]>
* Add .zfs control directoryBrian Behlendorf2012-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <[email protected]> Contributiobs-by: Andrew Barnes <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #173
* Cleanly support debug packagesBrian Behlendorf2012-02-271-0/+1
| | | | | | | | | | | | | | | | | | | Allow a source rpm to be rebuilt with debugging enabled. This avoids the need to have to manually modify the spec file. By default debugging is still largely disabled. To enable specific debugging features use the following options with rpmbuild. '--with debug' - Enables ASSERTs # For example: $ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm Additionally, ZFS_CONFIG has been added to zfs_config.h for packages which build against these headers. This is critical to ensure both zfs and the dependant package are using the same prototype and structure definitions. Signed-off-by: Brian Behlendorf <[email protected]>
* Add support for DISCARD to ZVOLs.Etienne Dechamps2012-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <[email protected]>
* Support the fallocate() file operation.Etienne Dechamps2012-02-091-0/+1
| | | | | | | | | | | | | | Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is supported, since it's the only one that matches the behavior of zfs_space(). This makes it pretty much useless in its current form, but it's a start. To support other flag combinations we would need to modify zfs_space() to make it more flexible, or emulate the desired functionality in zpl_fallocate(). Signed-off-by: Brian Behlendorf <[email protected]> Issue #334
* Improve ZVOL queue behavior.Etienne Dechamps2012-02-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <[email protected]>
* Fix synchronicity for ZVOLs.Etienne Dechamps2012-02-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <[email protected]>
* Linux 3.3 compat, sops->show_options()Brian Behlendorf2012-02-031-0/+1
| | | | | | | | | | The second argument of sops->show_options() was changed from a 'struct vfsmount *' to a 'struct dentry *'. Add an autoconf check to detect the API change and then conditionally define the expected interface. In either case we are only interested in the zfs_sb_t. Signed-off-by: Brian Behlendorf <[email protected]> Closes #549
* Combine libraries: spl, avl, efi, share, unicode.Darik Horn2012-01-172-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | These libraries, which are an artifact of the ZoL development process, conflict with packages that are already in distribution: * libspl: SPL Programming Language * libavl: AVL for Linux * libefi: GRUB And these libraries are potential conflicts: * libshare: the Linux Mount Manager * libunicode: Perl and Python Recompose these five ZoL components into the four libraries that are conventionally provided by Solaris and FreeBSD systems: + libnvpair + libuutil + libzpool + libzfs This change resolves the name conflict, makes ZoL more compatible with existing software that uses autotools to detect ZFS, and allows pkg-zfs to better reflect the official Debian kFreeBSD packaging. Signed-off-by: Brian Behlendorf <[email protected]> Closes: #430
* Linux 3.1 compat, super_block->s_shrinkBrian Behlendorf2012-01-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <[email protected]> Closes #466 Closes #292
* Linux 3.2 compat: set_nlink()Darik Horn2011-12-161-0/+1
| | | | | | | | | | | Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170 Use the new set_nlink() kernel function instead. Signed-off-by: Brian Behlendorf <[email protected]> Closes: #462
* Add make rule for building Arch Linux packagesPrakash Surya2011-12-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #491
* Simplify BDI integrationBrian Behlendorf2011-11-081-0/+1
| | | | | | | | | | | | | | Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <[email protected]> Closes #367
* Autogen refresh for udev changesBrian Behlendorf2011-08-081-0/+3
| | | | | | | | Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
* Add backing_device_info per-filesystemBrian Behlendorf2011-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <[email protected]> Closes #174
* Provide a rc.d script for archlinuxzfs-0.6.0-rc5Kyle Fuller2011-07-111-0/+1
| | | | | | | | | | | Unlike most other Linux distributions archlinux installs its init scripts in /etc/rc.d insead of /etc/init.d. This commit provides an archlinux rc.d script for zfs and extends the build infrastructure to ensure it get's installed in the correct place. Signed-off-by: Brian Behlendorf <[email protected]> Closes #322
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 15:49:40 +0000