aboutsummaryrefslogtreecommitdiffstats
path: root/cmd/zed
Commit message (Collapse)AuthorAgeFilesLines
* Avoid fault diagnosis if multiple vdevs have errorsDon Brady2024-09-181-29/+72
| | | | | | | | | | | | When multiple drives are throwing errors, it is likely not a drive failing but rather a failure above the drives, like a controller. The active cases context of the drive's peers is now considered when making a diagnosis. Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed by: Brian Behlendorf <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #16531
* fm: pass io_flags through events & zed as uint64_tRob Norris2024-08-261-3/+12
| | | | | | | | | | | | | | | | | | | In 4938d01db (#14086) zio_flag_t was converted from an enum (generally signed 32-bit) to a uint64_t. The corresponding change wasn't made to the error reporting subsystem, limiting the error flags being delivered to zed to 32 bits. This bumps the whole pipeline to use uint64s. A tiny bit of compatibility is added for newer zed working agsinst an older kernel module, because its easy to do and misdetecting scrub/resilver errors and taking action is potentially dangerous. Making it work for new kernel modules against older zed seems to be far more invasive for far less benefit, so I have not. Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Alexander Motin <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Rob Norris <[email protected]> Closes #16469
* zed: Add deadman-slot_off.sh zedletBrian Behlendorf2024-05-293-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Optionally turn off disk's enclosure slot if an I/O is hung triggering the deadman. It's possible for outstanding I/O to a misbehaving SCSI disk to neither promptly complete or return an error. This can occur due to retry and recovery actions taken by the SCSI layer, driver, or disk. When it occurs the pool will be unresponsive even though there may be sufficient redundancy configured to proceeded without this single disk. When a hung I/O is detected by the kmods it will be posted as a deadman event. By default an I/O is considered to be hung after 5 minutes. This value can be changed with the zfs_deadman_ziotime_ms module parameter. If ZED_POWER_OFF_ENCLOSURE_SLOT_ON_DEADMAN is set the disk's enclosure slot will be powered off causing the outstanding I/O to fail. The ZED will then handle this like a normal disk failure. By default ZED_POWER_OFF_ENCLOSURE_SLOT_ON_DEADMAN is not set. As part of this change `zfs_deadman_events_per_second` is added to control the ratelimitting of deadman events independantly of delay events. In practice, a single deadman event is sufficient and more aren't particularly useful. Alphabetize the zfs_deadman_* entries in zfs.4. Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #16226
* Better control the thread pool size when mounting datasetsAlan Somers2024-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | Ever since a10d50f999, ZFS has mounted file systems in parallel when importing a pool. It uses a fixed size of 512 for the thread pool. But since c183d164aa1, it has also imported pools in parallel. So the total number of threads at one time is 513 * npools + 1. That can easily exceed the system's limit on the number of threads per process, which will cause one or more pools to be unable to allocate any worker threads, forcing them to fallback to slow serial mounting . To forestall that, manage the threadpool size in /sbin/zpool, not libzfs. Use the same size (512), but divided by the number of pools. This is a backwards-incompatible change to the libzfs abi. Sponsored by: Axcient Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: George Wilson <[email protected]> Signed-off-by: Alan Somers <[email protected]> Closes #16178
* Add slow disk diagnosis to ZEDDon Brady2024-02-086-60/+151
| | | | | | | | | | | | | | | | | | | | | Slow disk response times can be indicative of a failing drive. ZFS currently tracks slow I/Os (slower than zio_slow_io_ms) and generates events (ereport.fs.zfs.delay). However, no action is taken by ZED, like is done for checksum or I/O errors. This change adds slow disk diagnosis to ZED which is opt-in using new VDEV properties: VDEV_PROP_SLOW_IO_N VDEV_PROP_SLOW_IO_T If multiple VDEVs in a pool are undergoing slow I/Os, then it skips the zpool_vdev_degrade(). Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Allan Jude <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Co-authored-by: Rob Wing <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #15469
* Add Gotify notification support to ZEDgofaster2024-01-092-0/+116
| | | | | | | | | | | This commit adds the zed_notify_gotify() function and hooks it into zed_notify(). This will allow ZED to send notifications to a self-hosted Gotify service, which can be received on a desktop or mobile device. It is configured with ZED_GOTIFY_URL, ZED_GOTIFY_APPTOKEN and ZED_GOTIFY_PRIORITY variables in zed.rc. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: gofaster <[email protected]> Closes #15693
* zed: fix typo in variable ZED_POWER_OFF_ENCLO*US*RE_SLOT_ON_FAULTMauricio Faria de Oliveira2023-12-082-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace ENCLO_US_RE with ENCLO_SU_RE in the name of the variable. Note this changes the user-visible string in zed.rc, thus might break current users with the wrong string, but it's ~2 months since zfs-2.2.0 tag is out, thus should not be widespread yet. Mechanical change: $ grep -rl ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT cmd/zed/zed.d/zed.rc cmd/zed/zed.d/statechange-slot_off.sh $ sed -i 's/ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT/<linebreak> ZED_POWER_OFF_ENCLOSURE_SLOT_ON_FAULT/g' \ cmd/zed/zed.d/zed.rc \ cmd/zed/zed.d/statechange-slot_off.sh $ grep -rl ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT $ Fixes 11fbcacf37d1a66c7a40bb8920c70ce9a87270ea ("zed: Add zedlet to power off slot when drive is faulted") Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Mauricio Faria de Oliveira <[email protected]> Closes #15651
* Add Ntfy notification support to ZEDDex Wood2023-12-012-0/+120
| | | | | | | | | | | | This commit adds the zed_notify_ntfy() function and hooks it into zed_notify(). This will allow ZED to send notifications to ntfy.sh or a self-hosted Ntfy service, which can be received on a desktop or mobile device. It is configured with ZED_NTFY_TOPIC, ZED_NTFY_URL, and ZED_NTFY_ACCESS_TOKEN variables in zed.rc. Reviewed-by: @classabbyamp Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Dex Wood <[email protected]> Closes #15584
* zed: misc vdev_enc_sysfs_path fixesTony Hutter2023-11-072-0/+35
| | | | | | | | | | | | | | | | | | There have been rare cases where the VDEV_ENC_SYSFS_PATH value that zed gets passed is stale. To mitigate this, dynamically check the sysfs path at the time of zed event processing, and use the dynamic value if possible. Note that there will be other times when we can not dynamically detect the sysfs path (like if a disk disappears) and have to rely on the old value for things like turning on the fault LED. That is to say, we can't just blindly use the dynamic path in every case. Also: - Add enclosure sysfs entry when running 'zpool add' - Fix 'slot' and 'enc' zpool.d scripts for nvme Reviewed-by: Don Brady <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #15462
* Fix ZED auto-replace for VDEVs using by-id pathsDon Brady2023-10-201-18/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The change is simple -- restore the original code so that the VDEV path is updated when using by-id paths. The more challenging part was to devise a second ZTS test, that would test auto-replace for 'by-id' and help prevent a future regression. With that new test, we can now do an A|B test with , and without, the fix to confirm that auto-replace for by-id paths works. The existing auto-replace test, functional/fault/auto_replace_001_pos, will confirm that we didn't break auto-replace for 'by-vdev' paths. In the original functional/fault/auto_replace_001_pos test, the disk wipe (using dd) was not effective in removing the partitioning since the kernel was never informed of the wipe. Added a call to wipefs(8) so that the kernel is informed and ZED will re-partition the device. Added a validation step that the re-partitioning occurred by confirming that the GPT partition UUID changes. Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc. Reviewed-by: Rob Norris <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Don Brady <[email protected]> Closes #15363
* Add zfs_prepare_disk script for disk firmware installTony Hutter2023-09-211-2/+41
| | | | | | | | | | Have libzfs call a special `zfs_prepare_disk` script before a disk is included into the pool. The user can edit this script to add things like a disk firmware update or a disk health check. Use of the script is totally optional. See the zfs_prepare_disk manpage for full details. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #15243
* zed: Allow autoreplace and fault LEDs for removed vdevsTony Hutter2023-09-182-1/+2
| | | | | | | | Allow zed to autoreplace vdevs marked as REMOVED. Also update statechange-led zedlet to toggle fault LEDs for REMOVED vdevs. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #15281
* checkstyle: fix action failuresSerapheim Dimitropoulos2023-08-291-0/+1
| | | | | | | Reviewed-by: Don Brady <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Serapheim Dimitropoulos <[email protected]> Closes #15220
* zed: update zed.d/statechange-slot_off.shBrian Behlendorf2023-08-262-8/+12
| | | | | | | | | | | The statechange-slot_off.sh zedlet which was added in #15200 needed to be installed so it's included by the packages. Additional testing has also shown that multiple retries are often needed for the script to operate reliably. Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #15210
* zed: Add zedlet to power off slot when drive is faultedTony Hutter2023-08-242-0/+66
| | | | | | | | | | | If ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT is enabled in zed.rc, then power off the drive's slot in the enclosure if it becomes FAULTED. This can help silence misbehaving drives. This assumes your drive enclosure fully supports slot power control via sysfs. Reviewed-by: @AllKind Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #15200
* zed: Reduce log noise for large JBODsBrian Behlendorf2023-07-251-2/+0
| | | | | | | | | | | For large JBODs the log message "zfs_iter_vdev: no match" can account for the bulk of the log messages (over 70%). Since this message is purely informational and not that useful we remove it. Reviewed-by: Olaf Faaland <[email protected]> Reviewed-by: Brian Atkinson <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #15086 Closes #15094
* zed: Fix zed ASSERT on slot power cycleTony Hutter2023-07-211-0/+5
| | | | | | | | | | We would see zed assert on one of our systems if we powered off a slot. Further examination showed zfs_retire_recv() was reporting a GUID of 0, which in turn would return a NULL nvlist. Add in a check for a zero GUID. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #15084
* Use list_remove_head() where possible.Alexander Motin2023-06-092-10/+4
| | | | | | | | | | | ... instead of list_head() + list_remove(). On FreeBSD the list functions are not inlined, so in addition to more compact code this also saves another function call. Reviewed-by: Brian Atkinson <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Alexander Motin <[email protected]> Sponsored by: iXsystems, Inc. Closes #14955
* Probe vdevs before marking removedBrian Behlendorf2023-05-191-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Before allowing the ZED to mark a vdev as REMOVED due to a hotplug event confirm that it is non-responsive with probe. Any device which can be successfully probed should be left ONLINE to prevent a healthy pool from being incorrectly SUSPENDED. This may occur for at least the following two scenarios. 1) Drive expansion (zpool online -e) in VMware environments. If, during the partition resize operation, a partition is removed and re-created then udev will send a removed event. 2) Re-scanning the namespaces of an NVMe device (nvme ns-rescan) may result in a udev remove and add event being delivered. Finally, update the ZED to only kick in a spare when the removal was successful. Reviewed-by: Ameer Hamza <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #14859 Closes #14861
* nvpair: Constify string functionsRichard Yao2023-03-147-31/+35
| | | | | | | | | | | | | | After addressing coverity complaints involving `nvpair_name()`, the compiler started complaining about dropping const. This lead to a rabbit hole where not only `nvpair_name()` needed to be constified, but also `nvpair_value_string()`, `fnvpair_value_string()` and a few other static functions, plus variable pointers throughout the code. The result became a fairly big change, so it has been split out into its own patch. Reviewed-by: Tino Reichardt <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #14612
* Configure zed's diagnosis engine with vdev propertiesrob-wing2023-01-231-4/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce four new vdev properties: checksum_n checksum_t io_n io_t These properties can be used for configuring the thresholds of zed's diagnosis engine and are interpeted as <N> events in T <seconds>. When this property is set to a non-default value on a top-level vdev, those thresholds will also apply to its leaf vdevs. This behavior can be overridden by explicitly setting the property on the leaf vdev. Note that, these properties do not persist across vdev replacement. For this reason, it is advisable to set the property on the top-level vdev instead of the leaf vdev. The default values for zed's diagnosis engine (10 events, 600 seconds) remains unchanged. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Allan Jude <[email protected]> Signed-off-by: Rob Wing <[email protected]> Sponsored-by: Seagate Technology LLC Closes #13805
* zed: add hotplug support for spare vdevsAmeer Hamza2023-01-093-13/+99
| | | | | | | | | | | | | | | | This commit supports for spare vdev hotplug. The spare vdev associated with all the pools will be marked as "Removed" when the drive is physically detached and will become "Available" when the drive is reattached. Currently, the spare vdev status does not change on the drive removal and the same is the case with reattachment. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ameer Hamza <[email protected]> Closes #14295
* Change ZEVENT_POOL_GUID to ZEVENT_POOL to display pool namesMarcel Menzel2022-12-131-2/+2
| | | | | | | | | | | | | Outgoing mails for ZFS pool events include the pool GUID, but not the actual pool name. Let's change this for better readability, as it is already done in the mails for finished pool resilvers. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: George Melikov <[email protected]> Reviewed-by Richard Yao <[email protected]> Signed-off-by: Marcel Menzel <[email protected]> Closes #14272
* zed: unclean disk attachment faults the vdevAmeer Hamza2022-11-291-7/+19
| | | | | | | | | | | | | | | If the attached disk already contains a vdev GUID, it means the disk is not clean. In such a scenario, the physical path would be a match that makes the disk faulted when trying to online it. So, we would only want to proceed if either GUID matches with the last attached disk or the disk is in a clean state. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Ameer Hamza <[email protected]> Closes #14181
* Introduce kmem_scnprintf()Richard Yao2022-10-291-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `snprintf()` is meant to protect against buffer overflows, but operating on the buffer using its return value, possibly by calling it again, can cause a buffer overflow, because it will return how many characters it would have written if it had enough space even when it did not. In a number of places, we repeatedly call snprintf() by successively incrementing a buffer offset and decrementing a buffer length, by its return value. This is a potentially unsafe usage of `snprintf()` whenever the buffer length is reached. CodeQL complained about this. To fix this, we introduce `kmem_scnprintf()`, which will return 0 when the buffer is zero or the number of written characters, minus 1 to exclude the NULL character, when the buffer was too small. In all other cases, it behaves like snprintf(). The name is inspired by the Linux and XNU kernels' `scnprintf()`. The implementation was written before I thought to look at `scnprintf()` and had a good name for it, but it turned out to have identical semantics to the Linux kernel version. That lead to the name, `kmem_scnprintf()`. CodeQL only catches this issue in loops, so repeated use of snprintf() outside of a loop was not caught. As a result, a thorough audit of the codebase was done to examine all instances of `snprintf()` usage for potential problems and a few were caught. Fixes for them are included in this patch. Unfortunately, ZED is one of the places where `snprintf()` is potentially used incorrectly. Since using `kmem_scnprintf()` in it would require changing how it is linked, we modify its usage to make it safe, no matter what buffer length is used. In addition, there was a bug in the use of the return value where the NULL format character was not being written by pwrite(). That has been fixed. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #14098
* zed: Avoid core dump if wholedisk property does not existAmeer Hamza2022-10-211-7/+4
| | | | | | | | | | | | zed aborts and dumps core in vdev_whole_disk_from_config() if wholedisk property does not exist. make_leaf_vdev() adds the property but there may be already pools that don't have the wholedisk in the label. Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Alexander Motin <[email protected]> Reviewed-by: Richard Yao <[email protected]> Signed-off-by: Ameer Hamza <[email protected]> Closes #14062
* ZED: Fix uninitialized value readsRichard Yao2022-10-182-0/+2
| | | | | | | | | | | | | | Coverity complained about a couple of uninitialized value reads in ZED. * zfs_deliver_dle() can pass an uninitialized string to zed_log_msg() * An uninitialized sev.sigev_signo is passed to timer_create() The former would log garbage while the latter is not a real issue, but we might as well suppress it by initializing the field to 0 for consistency's sake. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #14047
* Handle possible null pointers from malloc/strdup/strndup()Richard Yao2022-10-063-0/+33
| | | | | | | | | | | | | | | | | | | | | | | GCC 12.1.1_p20220625's static analyzer caught these. Of the two in the btree test, one had previously been caught by Coverity and Smatch, but GCC flagged it as a false positive. Upon examining how other test cases handle this, the solution was changed from `ASSERT3P(node, !=, NULL);` to using `perror()` to be consistent with the fixes to the other fixes done to the ZTS code. That approach was also used in ZED since I did not see a better way of handling this there. Also, upon inspection, additional unchecked pointers from malloc()/calloc()/strdup() were found in ZED, so those were handled too. In other parts of the code, the existing methods to avoid issues from memory allocators returning NULL were used, such as using `umem_alloc(size, UMEM_NOFAIL)` or returning `ENOMEM`. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #13979
* Reduce false positives from Static AnalyzersRichard Yao2022-09-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both Clang's Static Analyzer and Synopsys' Coverity would ignore assertions. Following Clang's advice, we annotate our assertions: https://clang-analyzer.llvm.org/annotations.html#custom_assertions This makes both Clang's Static Analyzer and Coverity properly identify assertions. This change reduced Clang's reported defects from 246 to 180. It also reduced the false positives reported by Coverityi by 10, while enabling Coverity to find 9 more defects that previously were false negatives. A couple examples of this would be CID-1524417 and CID-1524423. After submitting a build to coverity with the modified assertions, CID-1524417 disappeared while the report for CID-1524423 no longer claimed that the assertion tripped. Coincidentally, it turns out that it is possible to more accurately annotate our headers than the Coverity modelling file permits in the case of format strings. Since we can do that and this patch annotates headers whenever `__coverity_panic__()` would have been used in the model file, we drop all models that use `__coverity_panic__()` from the model file. Upon seeing the success in eliminating false positives involving assertions, it occurred to me that we could also modify our headers to eliminate coverity's false positives involving byte swaps. We now have coverity specific byteswap macros, that do nothing, to disable Coverity's false positives when we do byte swaps. This allowed us to also drop the byteswap definitions from the model file. Lastly, a model file update has been done beyond the mentioned deletions: * The definitions of `umem_alloc_aligned()`, `umem_alloc()` andi `umem_zalloc()` were originally implemented in a way that was intended to inform coverity that when KM_SLEEP has been passed these functions, they do not return NULL. A small error in how this was done was found, so we correct it. * Definitions for umem_cache_alloc() and umem_cache_free() have been added. In practice, no false positives were avoided by making these changes, but in the interest of correctness from future coverity builds, we make them anyway. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #13902
* zed: mark disks as REMOVED when they are removedAmeer Hamza2022-09-282-22/+68
| | | | | | | | | | | | | ZED does not take any action for disk removal events if there is no spare VDEV available. Added zpool_vdev_remove_wanted() in libzfs and vdev_remove_wanted() in vdev.c to remove the VDEV through ZED on removal event. This means that if you are running zed and remove a disk, it will be properly marked as REMOVED. Reviewed-by: Alexander Motin <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Ameer Hamza <[email protected]> Closes #13797
* Fix unchecked return values and unused return valuesRichard Yao2022-09-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Coverity complained about unchecked return values and unused values that turned out to be unused return values. Different approaches were used to handle the different cases of unchecked return values: * cmd/zdb/zdb.c: VERIFY0 was used in one place since the existing code had no error handling. An error message was printed in another to match the rest of the code. * cmd/zed/agents/zfs_retire.c: We dismiss the return value with `(void)` because the value is expected to be potentially unset. * cmd/zpool_influxdb/zpool_influxdb.c: We dismiss the return value with `(void)` because the values are expected to be potentially unset. * cmd/ztest.c: VERIFY0 was used since we want failures if something goes wrong in ztest. * module/zfs/dsl_dir.c: We dismiss the return value with `(void)` because there is no guarantee that the zap entry will always be there. For example, old pools imported readonly would not have it and we do not want to fail here because of that. * module/zfs/zfs_fm.c: `fnvlist_add_*()` was used since the allocations sleep and thus can never fail. * module/zfs/zvol.c: We dismiss the return value with `(void)` because we do not need it. This matches what is already done in the analogous `zfs_replay_write2()`. * tests/zfs-tests/cmd/draid.c: We suppress one return value with `(void)` since the code handles errors already. The other return value is handled by switching to `fnvlist_lookup_uint8_array()`. * tests/zfs-tests/cmd/file/file_fadvise.c: We add error handling. * tests/zfs-tests/cmd/mmap_sync.c: We add error handling for munmap, but ignore failures on remove() with (void) since it is expected to be able to fail. * tests/zfs-tests/cmd/mmapwrite.c: We add error handling. As for unused return values, they were all in places where there was error handling, so logic was added to handle the return values. Reviewed-by: Alexander Motin <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #13920
* Fix potential NULL pointer dereference in zfsdle_vdev_online() Richard Yao2022-09-201-1/+1
| | | | | | | | Coverity complained about this. Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Chunwei Chen <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #13903
* Fix usage of zed_log_msg() and zfs_panic_recover()Richard Yao2022-09-195-6/+6
| | | | | | | | | | Coverity complained about the format specifiers not matching variables. In one case, the variable is a constant, so we fix it. In another, we were missing an argument (about which coverity also complained). Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Richard Yao <[email protected]> Closes #13888
* zed: Fix config_sync autoexpand floodTony Hutter2022-09-082-8/+163
| | | | | | | | | | | | | | | | | Users were seeing floods of `config_sync` events when autoexpand was enabled. This happened because all "disk status change" udev events invoke the autoexpand codepath, which calls zpool_relabel_disk(), which in turn cause another "disk status change" event to happen, in a feedback loop. Note that "disk status change" happens every time a user calls close() on a block device. This commit breaks the feedback loop by only allowing an autoexpand to happen if the disk actually changed size. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes: #7132 Closes: #7366 Closes #13729
* Prevent zevent list from consuming all of kernel memoryPaul Dagnelie2022-08-223-5/+31
| | | | | | | | | | | | | | | | | | | | There are a couple changes included here. The first is to introduce a cap on the size the ZED will grow the zevent list to. One million entries is more than enough for most use cases, and if you are overflowing that value, the problem needs to be addressed another way. The value is also tunable, for those who want the limit to be higher or lower. The other change is to add a kernel module parameter that allows snapshot creation/deletion to be exempted from the history logging; for most workloads, having these things logged is valuable, but for some workloads it produces large quantities of log spam and isn't especially helpful. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Paul Dagnelie <[email protected]> Issue #13374 Closes #13753
* zed: Look for NVMe DEVPATH if no ID_BUSTony Hutter2022-07-141-2/+11
| | | | | | | | | | | | | | | | | We tried replacing an NVMe drive using autoreplace, only to see zed reject it with: zed[27955]: zed_udev_monitor: /dev/nvme5n1 no devid source This happened because ZED saw that ID_BUS was not set by udev for the NVMe drive, and thus didn't think it was "real drive". This commit allows NVMe drives to be autoreplaced even if ID_BUS is not set. Reviewed-by: Don Brady <[email protected]> Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #13512 Closes #13646
* Replace dead opensolaris.org license linkTino Reichardt2022-07-117-7/+7
| | | | | | | | | The commit replaces all findings of the link: http://www.opensolaris.org/os/licensing with this one: https://opensource.org/licenses/CDDL-1.0 Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tino Reichardt <[email protected]> Closes #13619
* zed: Ignore false 'atari' partitions in autoreplaceTony Hutter2022-07-111-8/+23
| | | | | | | | | | | libudev will sometimes falsely identify an 'atari' partition on a blank disk, preventing it from being used in an autoreplace. This seems to be a known issue. The workaround is to just ignore the fake partition and continue with the autoreplace. Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Tony Hutter <[email protected]> Closes #13497 Closes #13632
* Enable -Wwrite-stringsнаб2022-06-291-1/+2
| | | | | | | | Also, fix leak from ztest_global_vars_to_zdb_args() Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13348
* Replace EXTRA_DIST with dist_noinst_DATABrian Behlendorf2022-05-262-2/+2
| | | | | | | | | | | | | | | The EXTRA_DIST variable is ignored when used in the FALSE conditional of a Makefile.am. This results in the `make dist` target omitting these files from the generated tarball unless CONFIG_USER is defined. This issue can be avoided by switching to use the dist_noinst_DATA variable which is handled as expected by autoconf. This change also adds support for --with-config=dist as an alias for --with-config=srpm and updates the GitHub workflows to use it. Reviewed-by: Ahelenia Ziemiańska <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #13459 Closes #13505
* zed: Take no action on scrub/resilver checksum errorsBrian Behlendorf2022-05-241-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | When scrubbing/resilvering a pool it can be counter productive to cancel the scan and kick of a replace operation to a hot spare when encountering checksum errors. In this case, the best course of action is to allow the scrub/resilver to complete as quickly as possible and to keep the vdevs fully online if possible. Realistically, this is less of an issue for a RAIDZ since a traditional resilver must be used and checksums will be verified. However, this is not the case for a mirror or dRAID pool which is sequentially resilvered and checksum verification is deferred until after the replace operation completes. Regardless, we apply this policy to all pool types since it's a good idea for all vdevs. Degrading additional vdevs has the potential to make a bad situation worse. Note the checksum errors will still be reported as both an event and by `zpool status`. This change only prevents the ZED from proactively taking any action. Reviewed-by: Tony Hutter <[email protected]> Reviewed-by: Tony Nguyen <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #13499
* Remove final K&R definitionsнаб2022-05-182-6/+6
| | | | | | | | | Clang trunk now warns -Wstrict-prototypes on this, and they're removed in C2x Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13447
* zed: support subject as header in zed_notify_email()heeplr2022-05-182-3/+17
| | | | | | | | | | | Some minimal MUAs don't support passing the subjects as cmdline option. This commit checks if "@SUBJECT@" is missing in ZED_EMAIL_OPTS and then prepends a subject header to the notification message. Also set a default for ${subject}. Reviewed-by: Ahelenia Ziemia<C5><84>ska <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Daniel Hiepler <[email protected]> Closes #13440
* autoconf: use include directives instead of recursing down cmdнаб2022-05-102-81/+69
| | | | | | | | | | | | | | | | | No installation diff, dist lost -zfs-2.1.99/cmd/fsck_zfs/fsck.zfs which was distributed erroneously, since it's generated Also clean gitrev on clean Also add -e 'any possible bashisms' to default checkbashisms flags, and fully parallelise it and shellcheck, and it works out-of-tree, too Also align the Release in the dist META file correctly Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13316
* autoconf: use include directives instead of recursing down libнаб2022-05-101-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a bonus, this also adds zfs-mount-generator (previously undescended down) and libzstd (not included) to CppCheck As a bonus bonus, abigail rules work out-of-tree, too Against current trunk: $ diff -U0 ./destdir.listing ~/store/code/zfs/destdir.listing -destdir/usr/local/include/libspl/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep -v /Makefile -zfs-2.1.99/config/Abigail.am -zfs-2.1.99/lib/libspl/include/util/ -zfs-2.1.99/lib/libspl/include/util/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep /Makefile -zfs-2.1.99/lib/libavl/Makefile.in -zfs-2.1.99/lib/libefi/Makefile.in -zfs-2.1.99/lib/libicp/Makefile.in -zfs-2.1.99/lib/libnvpair/Makefile.in -zfs-2.1.99/lib/libshare/Makefile.in -zfs-2.1.99/lib/libspl/include/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/Makefile.am -zfs-2.1.99/lib/libspl/include/os/Makefile.in -zfs-2.1.99/lib/libspl/include/rpc/Makefile.am -zfs-2.1.99/lib/libspl/include/rpc/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/util/Makefile.am -zfs-2.1.99/lib/libspl/include/util/Makefile.in -zfs-2.1.99/lib/libspl/Makefile.in -zfs-2.1.99/lib/libtpool/Makefile.in -zfs-2.1.99/lib/libunicode/Makefile.in -zfs-2.1.99/lib/libuutil/Makefile.in -zfs-2.1.99/lib/libzfsbootenv/Makefile.in -zfs-2.1.99/lib/libzfs_core/Makefile.in -zfs-2.1.99/lib/libzfs/Makefile.in -zfs-2.1.99/lib/libzpool/Makefile.in -zfs-2.1.99/lib/libzstd/Makefile.in -zfs-2.1.99/lib/libzutil/Makefile.in -zfs-2.1.99/lib/Makefile.in Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13316
* cmd: zed: rc: drop "should be owned by root and 0600"наб2022-04-052-4/+1
| | | | | | | | | | | | | It doesn't matter, 0600 are Weird Permissions, and it's even weirder to spec them for no reason ‒ it's perfectly fine if it's the usual 0:0 644, or literally anything else, so long as unprivileged users can't edit it (which (a) 644 accomplishes and (b) is at the administrator's discretion, it's not unheard of to have adm users and having it be 664 in that case is just as good; it's not our place to say) Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12544 Closes #13276
* libspl: zed: event: use localtime_r()наб2022-04-051-5/+5
| | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13284
* zed: functions: zed_log_err: forward to zed_log_msgнаб2022-04-011-2/+1
| | | | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13259
* zed: lets: all-debug: printenv -> envнаб2022-04-011-1/+1
| | | | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Reviewed-by: John Kennedy <[email protected]> Reviewed-by: Ryan Moeller <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #13259
* Replace FMD_B_{TRUE,FALSE} with B_{TRUE,FALSE}наб2022-03-153-12/+7
| | | | | | Reviewed-by: Brian Behlendorf <[email protected]> Signed-off-by: Ahelenia Ziemiańska <[email protected]> Closes #12996
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 04:09:14 +0000