diff options
Diffstat (limited to 'man/man8')
| -rw-r--r-- | man/man8/zpool.8 | 4895 |
1 files changed, 2242 insertions, 2653 deletions
diff --git a/man/man8/zpool.8 b/man/man8/zpool.8 index 190b9dfc0..9a1520e77 100644 --- a/man/man8/zpool.8 +++ b/man/man8/zpool.8 @@ -1,2446 +1,2086 @@ -'\" te +.\" +.\" CDDL HEADER START +.\" +.\" The contents of this file are subject to the terms of the +.\" Common Development and Distribution License (the "License"). +.\" You may not use this file except in compliance with the License. +.\" +.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +.\" or http://www.opensolaris.org/os/licensing. +.\" See the License for the specific language governing permissions +.\" and limitations under the License. +.\" +.\" When distributing Covered Code, include this CDDL HEADER in each +.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE. +.\" If applicable, add the following below this CDDL HEADER, with the +.\" fields enclosed by brackets "[]" replaced with your own identifying +.\" information: Portions Copyright [yyyy] [name of copyright owner] +.\" +.\" CDDL HEADER END +.\" +.\" .\" Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved. -.\" Copyright 2011 Nexenta Systems, Inc. All rights reserved. .\" Copyright (c) 2013 by Delphix. All rights reserved. +.\" Copyright 2016 Nexenta Systems, Inc. .\" Copyright (c) 2012 Cyril Plisko. All Rights Reserved. .\" Copyright (c) 2017 Datto Inc. -.\" The contents of this file are subject to the terms of the Common Development -.\" and Distribution License (the "License"). You may not use this file except -.\" in compliance with the License. You can obtain a copy of the license at -.\" usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing. +.\" Copyright (c) 2017 George Melikov. All Rights Reserved. .\" -.\" See the License for the specific language governing permissions and -.\" limitations under the License. When distributing Covered Code, include this -.\" CDDL HEADER in each file and include the License file at -.\" usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this -.\" CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your -.\" own identifying information: -.\" Portions Copyright [yyyy] [name of copyright owner] -.TH zpool 8 "April 12, 2017" "ZFS pool 28, filesystem 5" "System Administration Commands" -.SH NAME -zpool \- configures ZFS storage pools -.SH SYNOPSIS -.LP -.nf -\fBzpool\fR [\fB-?\fR] -.fi - -.LP -.nf -\fBzpool add\fR [\fB-fgLnP\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fIvdev\fR ... -.fi - -.LP -.nf -\fBzpool attach\fR [\fB-f\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fIdevice\fR \fInew_device\fR -.fi - -.LP -.nf -\fBzpool clear\fR \fIpool\fR [\fIdevice\fR] -.fi - -.LP -.nf -\fBzpool create\fR [\fB-fnd\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-o\fR feature@\fIfeature=value\fR] - ... [\fB-O\fR \fIfile-system-property=value\fR] ... [\fB-m\fR \fImountpoint\fR] [\fB-R\fR \fIroot\fR] - ... [\fB-t\fR \fItname\fR] \fIpool\fR \fIvdev\fR ... -.fi - -.LP -.nf -\fBzpool destroy\fR [\fB-f\fR] \fIpool\fR -.fi - -.LP -.nf -\fBzpool detach\fR \fIpool\fR \fIdevice\fR -.fi - -.LP -.nf -\fBzpool events\fR [\fB-vHfc\fR] [\fIpool\fR] ... -.fi - -.LP -.nf -\fBzpool export\fR [\fB-a\fR] [\fB-f\fR] \fIpool\fR ... -.fi - -.LP -.nf -\fBzpool get\fR [\fB-Hp\fR] [\fB-o \fR\fIfield\fR[,...]] "\fIall\fR" | \fIproperty\fR[,...] \fIpool\fR ... -.fi - -.LP -.nf -\fBzpool history\fR [\fB-il\fR] [\fIpool\fR] ... -.fi - -.LP -.nf -\fBzpool import\fR [\fB-d\fR \fIdir\fR] [\fB-D\fR] -.fi - -.LP -.nf -\fBzpool import\fR [\fB-o \fImntopts\fR\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR] - [\fB-D\fR] [\fB-f\fR] [\fB-m\fR] [\fB-N\fR] [\fB-R\fR \fIroot\fR] [\fB-F\fR [\fB-n\fR] [\fB-X\fR\] [\fB-T\fR\]] [\fB-s\fR] \fB-a\fR -.fi - -.LP -.nf -\fBzpool import\fR [\fB-o \fImntopts\fR\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR] - [\fB-D\fR] [\fB-f\fR] [\fB-m\fR] [\fB-R\fR \fIroot\fR] [\fB-F\fR [\fB-n\fR] [\fB-X\fR] [\fB-T\fR\]] [\fB-t\fR]] [\fB-s\fR] - \fIpool\fR | \fIid\fR [\fInewpool\fR] -.fi - -.LP -.nf -\fB\fBzpool iostat\fR [[[\fB-c\fR \fBSCRIPT\fR] [\fB-lq\fR]] | \fB-rw\fR] [\fB-T\fR \fBd\fR | \fBu\fR] [\fB-ghHLpPvy\fR] - [[\fIpool\fR ...]|[\fIpool vdev\fR ...]|[\fIvdev\fR ...]] [\fIinterval\fR[\fIcount\fR]]\fR - -.fi - -.LP -.nf -\fBzpool labelclear\fR [\fB-f\fR] \fIdevice\fR -.fi - -.LP -.nf -\fBzpool list\fR [\fB-T\fR d | u ] [\fB-HgLpPv\fR] [\fB-o\fR \fIproperty\fR[,...]] [\fIpool\fR] ... - [\fIinterval\fR[\fIcount\fR]] -.fi - -.LP -.nf -\fBzpool offline\fR [\fB-f\fR] [\fB-t\fR] \fIpool\fR \fIdevice\fR ... -.fi - -.LP -.nf -\fBzpool online\fR \fIpool\fR \fIdevice\fR ... -.fi - -.LP -.nf -\fBzpool reguid\fR \fIpool\fR -.fi - -.LP -.nf -\fBzpool reopen\fR \fIpool\fR -.fi - -.LP -.nf -\fBzpool remove\fR \fIpool\fR \fIdevice\fR ... -.fi - -.LP -.nf -\fBzpool replace\fR [\fB-f\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fIdevice\fR [\fInew_device\fR] -.fi - -.LP -.nf -\fBzpool scrub\fR [\fB-s\fR] \fIpool\fR ... -.fi - -.LP -.nf -\fBzpool set\fR \fIproperty\fR=\fIvalue\fR \fIpool\fR -.fi - -.LP -.nf -\fBzpool split\fR [\fB-gLnP\fR] [\fB-R\fR \fIaltroot\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fInewpool\fR [\fIdevice\fR ...] -.fi - -.LP -.nf -\fBzpool status\fR [\fB-c\fR \fBSCRIPT\fR] [\fB-gLPvxD\fR] [\fB-T\fR d | u] [\fIpool\fR] ... [\fIinterval\fR [\fIcount\fR]] -.fi - -.LP -.nf -\fBzpool sync\fR [\fBpool\fR] ... -.fi - -.LP -.nf -\fBzpool upgrade\fR -.fi - -.LP -.nf -\fBzpool upgrade\fR \fB-v\fR -.fi - -.LP -.nf -\fBzpool upgrade\fR [\fB-V\fR \fIversion\fR] \fB-a\fR | \fIpool\fR ... -.fi - -.SH DESCRIPTION -.sp -.LP -The \fBzpool\fR command configures \fBZFS\fR storage pools. A storage pool is a collection of devices that provides physical storage and data replication for \fBZFS\fR datasets. -.sp -.LP -All datasets within a storage pool share the same space. See \fBzfs\fR(8) for information on managing datasets. -.SS "Virtual Devices (vdevs)" -.sp -.LP -A "virtual device" describes a single device or a collection of devices organized according to certain performance and fault characteristics. The following virtual devices are supported: -.sp -.ne 2 -.na -\fB\fBdisk\fR\fR -.ad -.RS 10n -A block device, typically located under \fB/dev\fR. \fBZFS\fR can use individual partitions, though the recommended mode of operation is to use whole disks. A disk can be specified by a full path, or it can be a shorthand name (the relative portion of the path under "/dev"). For example, "sda" is equivalent to "/dev/sda". A whole disk can be specified by omitting the partition designation. When given a whole disk, \fBZFS\fR automatically labels the disk, if necessary. -.RE - -.sp -.ne 2 -.na -\fB\fBfile\fR\fR -.ad -.RS 10n -A regular file. The use of files as a backing store is strongly discouraged. It is designed primarily for experimental purposes, as the fault tolerance of a file is only as good as the file system of which it is a part. A file must be specified by a full path. -.RE - -.sp -.ne 2 -.na -\fB\fBmirror\fR\fR -.ad -.RS 10n -A mirror of two or more devices. Data is replicated in an identical fashion across all components of a mirror. A mirror with \fIN\fR disks of size \fIX\fR can hold \fIX\fR bytes and can withstand (\fIN-1\fR) devices failing before data integrity is compromised. -.RE - -.sp -.ne 2 -.na -\fB\fBraidz\fR\fR -.ad -.br -.na -\fB\fBraidz1\fR\fR -.ad -.br -.na -\fB\fBraidz2\fR\fR -.ad -.br -.na -\fB\fBraidz3\fR\fR -.ad -.RS 10n -A variation on \fBRAID-5\fR that allows for better distribution of parity and eliminates the "\fBRAID-5\fR write hole" (in which data and parity become inconsistent after a power loss). Data and parity is striped across all disks within a \fBraidz\fR group. -.sp -A \fBraidz\fR group can have single-, double- , or triple parity, meaning that the \fBraidz\fR group can sustain one, two, or three failures, respectively, without losing any data. The \fBraidz1\fR \fBvdev\fR type specifies a single-parity \fBraidz\fR group; the \fBraidz2\fR \fBvdev\fR type specifies a double-parity \fBraidz\fR group; and the \fBraidz3\fR \fBvdev\fR type specifies a triple-parity \fBraidz\fR group. The \fBraidz\fR \fBvdev\fR type is an alias for \fBraidz1\fR. -.sp -A \fBraidz\fR group with \fIN\fR disks of size \fIX\fR with \fIP\fR parity disks can hold approximately (\fIN-P\fR)*\fIX\fR bytes and can withstand \fIP\fR device(s) failing before data integrity is compromised. The minimum number of devices in a \fBraidz\fR group is one more than the number of parity disks. The recommended number is between 3 and 9 to help increase performance. -.RE - -.sp -.ne 2 -.na -\fB\fBspare\fR\fR -.ad -.RS 10n -A special pseudo-\fBvdev\fR which keeps track of available hot spares for a pool. For more information, see the "Hot Spares" section. -.RE - -.sp -.ne 2 -.na -\fB\fBlog\fR\fR -.ad -.RS 10n -A separate-intent log device. If more than one log device is specified, then writes are load-balanced between devices. Log devices can be mirrored. However, \fBraidz\fR \fBvdev\fR types are not supported for the intent log. For more information, see the "Intent Log" section. -.RE - -.sp -.ne 2 -.na -\fB\fBcache\fR\fR -.ad -.RS 10n -A device used to cache storage pool data. A cache device cannot be configured as a mirror or \fBraidz\fR group. For more information, see the "Cache Devices" section. -.RE - -.sp -.LP -Virtual devices cannot be nested, so a mirror or \fBraidz\fR virtual device can only contain files or disks. Mirrors of mirrors (or other combinations) are not allowed. -.sp -.LP -A pool can have any number of virtual devices at the top of the configuration (known as "root vdevs"). Data is dynamically distributed across all top-level devices to balance data among devices. As new virtual devices are added, \fBZFS\fR automatically places data on the newly available devices. -.sp -.LP -Virtual devices are specified one at a time on the command line, separated by whitespace. The keywords "mirror" and "raidz" are used to distinguish where a group ends and another begins. For example, the following creates two root vdevs, each a mirror of two disks: -.sp -.in +2 -.nf -# \fBzpool create mypool mirror sda sdb mirror sdc sdd\fR -.fi -.in -2 -.sp - -.SS "Device Failure and Recovery" -.sp -.LP -\fBZFS\fR supports a rich set of mechanisms for handling device failure and data corruption. All metadata and data is checksummed, and \fBZFS\fR automatically repairs bad data from a good copy when corruption is detected. -.sp -.LP -In order to take advantage of these features, a pool must make use of some form of redundancy, using either mirrored or \fBraidz\fR groups. While \fBZFS\fR supports running in a non-redundant configuration, where each root vdev is simply a disk or file, this is strongly discouraged. A single case of bit corruption can render some or all of your data unavailable. -.sp -.LP -A pool's health status is described by one of three states: online, degraded, or faulted. An online pool has all devices operating normally. A degraded pool is one in which one or more devices have failed, but the data is still available due to a redundant configuration. A faulted pool has corrupted metadata, or one or more faulted devices, and insufficient replicas to continue functioning. -.sp -.LP -The health of the top-level vdev, such as mirror or \fBraidz\fR device, is potentially impacted by the state of its associated vdevs, or component devices. A top-level vdev or component device is in one of the following states: -.sp -.ne 2 -.na -\fB\fBDEGRADED\fR\fR -.ad -.RS 12n -One or more top-level vdevs is in the degraded state because one or more component devices are offline. Sufficient replicas exist to continue functioning. -.sp -One or more component devices is in the degraded or faulted state, but sufficient replicas exist to continue functioning. The underlying conditions are as follows: -.RS +4 -.TP -.ie t \(bu -.el o -The number of checksum errors exceeds acceptable levels and the device is degraded as an indication that something may be wrong. \fBZFS\fR continues to use the device as necessary. -.RE -.RS +4 -.TP -.ie t \(bu -.el o -The number of I/O errors exceeds acceptable levels. The device could not be marked as faulted because there are insufficient replicas to continue functioning. -.RE -.RE - -.sp -.ne 2 -.na -\fB\fBFAULTED\fR\fR -.ad -.RS 12n -One or more top-level vdevs is in the faulted state because one or more component devices are offline. Insufficient replicas exist to continue functioning. -.sp -One or more component devices is in the faulted state, and insufficient replicas exist to continue functioning. The underlying conditions are as follows: -.RS +4 -.TP -.ie t \(bu -.el o +.Dd June 22, 2017 +.Dt ZPOOL 8 SMM +.Os Linux +.Sh NAME +.Nm zpool +.Nd configure ZFS storage pools +.Sh SYNOPSIS +.Nm +.Fl ? +.Nm +.Cm add +.Op Fl fgLnP +.Oo Fl o Ar property Ns = Ns Ar value Oc +.Ar pool vdev Ns ... +.Nm +.Cm attach +.Op Fl f +.Oo Fl o Ar property Ns = Ns Ar value Oc +.Ar pool device new_device +.Nm +.Cm clear +.Ar pool +.Op Ar device +.Nm +.Cm create +.Op Fl dfn +.Op Fl m Ar mountpoint +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Oo Fl o Ar feature@feature Ns = Ns Ar value Oc +.Oo Fl O Ar file-system-property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Ar pool vdev Ns ... +.Nm +.Cm destroy +.Op Fl f +.Ar pool +.Nm +.Cm detach +.Ar pool device +.Nm +.Cm events +.Op Fl vHfc +.Op Ar pool +.Nm +.Cm export +.Op Fl a +.Op Fl f +.Ar pool Ns ... +.Nm +.Cm get +.Op Fl Hp +.Op Fl o Ar field Ns Oo , Ns Ar field Oc Ns ... +.Sy all Ns | Ns Ar property Ns Oo , Ns Ar property Oc Ns ... +.Ar pool Ns ... +.Nm +.Cm history +.Op Fl il +.Oo Ar pool Oc Ns ... +.Nm +.Cm import +.Op Fl D +.Op Fl c Ar cachefile Ns | Ns Fl d Ar dir +.Nm +.Cm import +.Fl a +.Op Fl DfmN +.Op Fl F Oo Fl n Oc Oo Fl T Oc Oo Fl X Oc +.Op Fl c Ar cachefile Ns | Ns Fl d Ar dir +.Op Fl o Ar mntopts +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Nm +.Cm import +.Op Fl Dfm +.Op Fl F Oo Fl n Oc Oo Fl T Oc Oo Fl X Oc +.Op Fl c Ar cachefile Ns | Ns Fl d Ar dir +.Op Fl o Ar mntopts +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Op Fl s +.Ar pool Ns | Ns Ar id +.Op Ar newpool Oo Fl t Oc +.Nm +.Cm iostat +.Op Oo Oo Fl c Ar SCRIPT Oc Oo Fl lq Oc Oc Ns | Ns Fl rw +.Op Fl T Sy u Ns | Ns Sy d +.Op Fl ghHLpPvy +.Oo Oo Ar pool Ns ... Oc Ns | Ns Oo Ar pool vdev Ns ... Oc Ns | Ns Oo Ar vdev Ns ... Oc Oc +.Op Ar interval Op Ar count +.Nm +.Cm labelclear +.Op Fl f +.Ar device +.Nm +.Cm list +.Op Fl HgLpPv +.Op Fl o Ar property Ns Oo , Ns Ar property Oc Ns ... +.Op Fl T Sy u Ns | Ns Sy d +.Oo Ar pool Oc Ns ... +.Op Ar interval Op Ar count +.Nm +.Cm offline +.Op Fl f +.Op Fl t +.Ar pool Ar device Ns ... +.Nm +.Cm online +.Op Fl e +.Ar pool Ar device Ns ... +.Nm +.Cm reguid +.Ar pool +.Nm +.Cm reopen +.Ar pool +.Nm +.Cm remove +.Ar pool Ar device Ns ... +.Nm +.Cm replace +.Op Fl f +.Oo Fl o Ar property Ns = Ns Ar value Oc +.Ar pool Ar device Op Ar new_device +.Nm +.Cm scrub +.Op Fl s +.Ar pool Ns ... +.Nm +.Cm set +.Ar property Ns = Ns Ar value +.Ar pool +.Nm +.Cm split +.Op Fl gLnP +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Ar pool newpool +.Oo Ar device Oc Ns ... +.Nm +.Cm status +.Oo Fl c Ar SCRIPT Oc +.Op Fl gLPvxD +.Op Fl T Sy u Ns | Ns Sy d +.Oo Ar pool Oc Ns ... +.Op Ar interval Op Ar count +.Nm +.Cm sync +.Oo Ar pool Oc Ns ... +.Nm +.Cm upgrade +.Nm +.Cm upgrade +.Fl v +.Nm +.Cm upgrade +.Op Fl V Ar version +.Fl a Ns | Ns Ar pool Ns ... +.Sh DESCRIPTION +The +.Nm +command configures ZFS storage pools. +A storage pool is a collection of devices that provides physical storage and +data replication for ZFS datasets. +All datasets within a storage pool share the same space. +See +.Xr zfs 8 +for information on managing datasets. +.Ss Virtual Devices (vdevs) +A "virtual device" describes a single device or a collection of devices +organized according to certain performance and fault characteristics. +The following virtual devices are supported: +.Bl -tag -width Ds +.It Sy disk +A block device, typically located under +.Pa /dev . +ZFS can use individual slices or partitions, though the recommended mode of +operation is to use whole disks. +A disk can be specified by a full path, or it can be a shorthand name +.Po the relative portion of the path under +.Pa /dev +.Pc . +A whole disk can be specified by omitting the slice or partition designation. +For example, +.Pa sda +is equivalent to +.Pa /dev/sda . +When given a whole disk, ZFS automatically labels the disk, if necessary. +.It Sy file +A regular file. +The use of files as a backing store is strongly discouraged. +It is designed primarily for experimental purposes, as the fault tolerance of a +file is only as good as the file system of which it is a part. +A file must be specified by a full path. +.It Sy mirror +A mirror of two or more devices. +Data is replicated in an identical fashion across all components of a mirror. +A mirror with N disks of size X can hold X bytes and can withstand (N-1) devices +failing before data integrity is compromised. +.It Sy raidz , raidz1 , raidz2 , raidz3 +A variation on RAID-5 that allows for better distribution of parity and +eliminates the RAID-5 +.Qq write hole +.Pq in which data and parity become inconsistent after a power loss . +Data and parity is striped across all disks within a raidz group. +.Pp +A raidz group can have single-, double-, or triple-parity, meaning that the +raidz group can sustain one, two, or three failures, respectively, without +losing any data. +The +.Sy raidz1 +vdev type specifies a single-parity raidz group; the +.Sy raidz2 +vdev type specifies a double-parity raidz group; and the +.Sy raidz3 +vdev type specifies a triple-parity raidz group. +The +.Sy raidz +vdev type is an alias for +.Sy raidz1 . +.Pp +A raidz group with N disks of size X with P parity disks can hold approximately +(N-P)*X bytes and can withstand P device(s) failing before data integrity is +compromised. +The minimum number of devices in a raidz group is one more than the number of +parity disks. +The recommended number is between 3 and 9 to help increase performance. +.It Sy spare +A special pseudo-vdev which keeps track of available hot spares for a pool. +For more information, see the +.Sx Hot Spares +section. +.It Sy log +A separate intent log device. +If more than one log device is specified, then writes are load-balanced between +devices. +Log devices can be mirrored. +However, raidz vdev types are not supported for the intent log. +For more information, see the +.Sx Intent Log +section. +.It Sy cache +A device used to cache storage pool data. +A cache device cannot be configured as a mirror or raidz group. +For more information, see the +.Sx Cache Devices +section. +.El +.Pp +Virtual devices cannot be nested, so a mirror or raidz virtual device can only +contain files or disks. +Mirrors of mirrors +.Pq or other combinations +are not allowed. +.Pp +A pool can have any number of virtual devices at the top of the configuration +.Po known as +.Qq root vdevs +.Pc . +Data is dynamically distributed across all top-level devices to balance data +among devices. +As new virtual devices are added, ZFS automatically places data on the newly +available devices. +.Pp +Virtual devices are specified one at a time on the command line, separated by +whitespace. +The keywords +.Sy mirror +and +.Sy raidz +are used to distinguish where a group ends and another begins. +For example, the following creates two root vdevs, each a mirror of two disks: +.Bd -literal +# zpool create mypool mirror sda sdb mirror sdc sdd +.Ed +.Ss Device Failure and Recovery +ZFS supports a rich set of mechanisms for handling device failure and data +corruption. +All metadata and data is checksummed, and ZFS automatically repairs bad data +from a good copy when corruption is detected. +.Pp +In order to take advantage of these features, a pool must make use of some form +of redundancy, using either mirrored or raidz groups. +While ZFS supports running in a non-redundant configuration, where each root +vdev is simply a disk or file, this is strongly discouraged. +A single case of bit corruption can render some or all of your data unavailable. +.Pp +A pool's health status is described by one of three states: online, degraded, +or faulted. +An online pool has all devices operating normally. +A degraded pool is one in which one or more devices have failed, but the data is +still available due to a redundant configuration. +A faulted pool has corrupted metadata, or one or more faulted devices, and +insufficient replicas to continue functioning. +.Pp +The health of the top-level vdev, such as mirror or raidz device, is +potentially impacted by the state of its associated vdevs, or component +devices. +A top-level vdev or component device is in one of the following states: +.Bl -tag -width "DEGRADED" +.It Sy DEGRADED +One or more top-level vdevs is in the degraded state because one or more +component devices are offline. +Sufficient replicas exist to continue functioning. +.Pp +One or more component devices is in the degraded or faulted state, but +sufficient replicas exist to continue functioning. +The underlying conditions are as follows: +.Bl -bullet +.It +The number of checksum errors exceeds acceptable levels and the device is +degraded as an indication that something may be wrong. +ZFS continues to use the device as necessary. +.It +The number of I/O errors exceeds acceptable levels. +The device could not be marked as faulted because there are insufficient +replicas to continue functioning. +.El +.It Sy FAULTED +One or more top-level vdevs is in the faulted state because one or more +component devices are offline. +Insufficient replicas exist to continue functioning. +.Pp +One or more component devices is in the faulted state, and insufficient +replicas exist to continue functioning. +The underlying conditions are as follows: +.Bl -bullet +.It The device could be opened, but the contents did not match expected values. -.RE -.RS +4 -.TP -.ie t \(bu -.el o -The number of I/O errors exceeds acceptable levels and the device is faulted to prevent further use of the device. -.RE -.RE - -.sp -.ne 2 -.na -\fB\fBOFFLINE\fR\fR -.ad -.RS 12n -The device was explicitly taken offline by the "\fBzpool offline\fR" command. -.RE - -.sp -.ne 2 -.na -\fB\fBONLINE\fR\fR -.ad -.RS 12n +.It +The number of I/O errors exceeds acceptable levels and the device is faulted to +prevent further use of the device. +.El +.It Sy OFFLINE +The device was explicitly taken offline by the +.Nm zpool Cm offline +command. +.It Sy ONLINE The device is online and functioning. -.RE - -.sp -.ne 2 -.na -\fB\fBREMOVED\fR\fR -.ad -.RS 12n -The device was physically removed while the system was running. Device removal detection is hardware-dependent and may not be supported on all platforms. -.RE - -.sp -.ne 2 -.na -\fB\fBUNAVAIL\fR\fR -.ad -.RS 12n -The device could not be opened. If a pool is imported when a device was unavailable, then the device will be identified by a unique identifier instead of its path since the path was never correct in the first place. -.RE - -.sp -.LP -If a device is removed and later re-attached to the system, \fBZFS\fR attempts to put the device online automatically. Device attach detection is hardware-dependent and might not be supported on all platforms. -.SS "Hot Spares" -.sp -.LP -\fBZFS\fR allows devices to be associated with pools as "hot spares". These devices are not actively used in the pool, but when an active device fails, it is automatically replaced by a hot spare. To create a pool with hot spares, specify a "spare" \fBvdev\fR with any number of devices. For example, -.sp -.in +2 -.nf +.It Sy REMOVED +The device was physically removed while the system was running. +Device removal detection is hardware-dependent and may not be supported on all +platforms. +.It Sy UNAVAIL +The device could not be opened. +If a pool is imported when a device was unavailable, then the device will be +identified by a unique identifier instead of its path since the path was never +correct in the first place. +.El +.Pp +If a device is removed and later re-attached to the system, ZFS attempts +to put the device online automatically. +Device attach detection is hardware-dependent and might not be supported on all +platforms. +.Ss Hot Spares +ZFS allows devices to be associated with pools as +.Qq hot spares . +These devices are not actively used in the pool, but when an active device +fails, it is automatically replaced by a hot spare. +To create a pool with hot spares, specify a +.Sy spare +vdev with any number of devices. +For example, +.Bd -literal # zpool create pool mirror sda sdb spare sdc sdd -.fi -.in -2 -.sp - -.sp -.LP -Spares can be shared across multiple pools, and can be added with the "\fBzpool add\fR" command and removed with the "\fBzpool remove\fR" command. Once a spare replacement is initiated, a new "spare" \fBvdev\fR is created within the configuration that will remain there until the original device is replaced. At this point, the hot spare becomes available again. -.sp -.LP -If a pool has a shared spare that is currently being used, the pool can not be exported since other pools may use this shared spare, which may lead to potential data corruption. -.sp -.LP -An in-progress spare replacement can be cancelled by detaching the hot spare. If the original faulted device is detached, then the hot spare assumes its place in the configuration, and is removed from the spare list of all active pools. -.sp -.LP +.Ed +.Pp +Spares can be shared across multiple pools, and can be added with the +.Nm zpool Cm add +command and removed with the +.Nm zpool Cm remove +command. +Once a spare replacement is initiated, a new +.Sy spare +vdev is created within the configuration that will remain there until the +original device is replaced. +At this point, the hot spare becomes available again if another device fails. +.Pp +If a pool has a shared spare that is currently being used, the pool can not be +exported since other pools may use this shared spare, which may lead to +potential data corruption. +.Pp +An in-progress spare replacement can be canceled by detaching the hot spare. +If the original faulted device is detached, then the hot spare assumes its +place in the configuration, and is removed from the spare list of all active +pools. +.Pp Spares cannot replace log devices. -.SS "Intent Log" -.sp -.LP -The \fBZFS\fR Intent Log (\fBZIL\fR) satisfies \fBPOSIX\fR requirements for synchronous transactions. For instance, databases often require their transactions to be on stable storage devices when returning from a system call. \fBNFS\fR and other applications can also use \fBfsync\fR() to ensure data stability. By default, the intent log is allocated from blocks within the main pool. However, it might be possible to get better performance using separate intent log devices such as \fBNVRAM\fR or a dedicated disk. For example: -.sp -.in +2 -.nf -\fB# zpool create pool sda sdb log sdc\fR -.fi -.in -2 -.sp - -.sp -.LP -Multiple log devices can also be specified, and they can be mirrored. See the EXAMPLES section for an example of mirroring multiple log devices. -.sp -.LP -Log devices can be added, replaced, attached, detached, and imported and exported as part of the larger pool. Mirrored log devices can be removed by specifying the top-level mirror for the log. -.SS "Cache Devices" -.sp -.LP -Devices can be added to a storage pool as "cache devices." These devices provide an additional layer of caching between main memory and disk. For read-heavy workloads, where the working set size is much larger than what can be cached in main memory, using cache devices allow much more of this working set to be served from low latency media. Using cache devices provides the greatest performance improvement for random read-workloads of mostly static content. -.sp -.LP -To create a pool with cache devices, specify a "cache" \fBvdev\fR with any number of devices. For example: -.sp -.in +2 -.nf -\fB# zpool create pool sda sdb cache sdc sdd\fR -.fi -.in -2 -.sp - -.sp -.LP -Cache devices cannot be mirrored or part of a \fBraidz\fR configuration. If a read error is encountered on a cache device, that read \fBI/O\fR is reissued to the original storage pool device, which might be part of a mirrored or \fBraidz\fR configuration. -.sp -.LP -The content of the cache devices is considered volatile, as is the case with other system caches. -.SS "Properties" -.sp -.LP -Each pool has several properties associated with it. Some properties are read-only statistics while others are configurable and change the behavior of the pool. The following are read-only properties: -.sp -.ne 2 -.na -\fB\fBavailable\fR\fR -.ad -.RS 20n -Amount of storage available within the pool. This property can also be referred to by its shortened column name, "avail". -.RE - -.sp -.ne 2 -.na -\fB\fBcapacity\fR\fR -.ad -.RS 20n -Percentage of pool space used. This property can also be referred to by its shortened column name, "cap". -.RE - -.sp -.ne 2 -.na -\fB\fBexpandsize\fR\fR -.ad -.RS 20n +.Ss Intent Log +The ZFS Intent Log (ZIL) satisfies POSIX requirements for synchronous +transactions. +For instance, databases often require their transactions to be on stable storage +devices when returning from a system call. +NFS and other applications can also use +.Xr fsync 2 +to ensure data stability. +By default, the intent log is allocated from blocks within the main pool. +However, it might be possible to get better performance using separate intent +log devices such as NVRAM or a dedicated disk. +For example: +.Bd -literal +# zpool create pool sda sdb log sdc +.Ed +.Pp +Multiple log devices can also be specified, and they can be mirrored. +See the +.Sx EXAMPLES +section for an example of mirroring multiple log devices. +.Pp +Log devices can be added, replaced, attached, detached, and imported and +exported as part of the larger pool. +Mirrored log devices can be removed by specifying the top-level mirror for the +log. +.Ss Cache Devices +Devices can be added to a storage pool as +.Qq cache devices . +These devices provide an additional layer of caching between main memory and +disk. +For read-heavy workloads, where the working set size is much larger than what +can be cached in main memory, using cache devices allow much more of this +working set to be served from low latency media. +Using cache devices provides the greatest performance improvement for random +read-workloads of mostly static content. +.Pp +To create a pool with cache devices, specify a +.Sy cache +vdev with any number of devices. +For example: +.Bd -literal +# zpool create pool sda sdb cache sdc sdd +.Ed +.Pp +Cache devices cannot be mirrored or part of a raidz configuration. +If a read error is encountered on a cache device, that read I/O is reissued to +the original storage pool device, which might be part of a mirrored or raidz +configuration. +.Pp +The content of the cache devices is considered volatile, as is the case with +other system caches. +.Ss Properties +Each pool has several properties associated with it. +Some properties are read-only statistics while others are configurable and +change the behavior of the pool. +.Pp +The following are read-only properties: +.Bl -tag -width Ds +.It Sy available +Amount of storage available within the pool. +This property can also be referred to by its shortened column name, +.Sy avail . +.It Sy capacity +Percentage of pool space used. +This property can also be referred to by its shortened column name, +.Sy cap . +.It Sy expandsize Amount of uninitialized space within the pool or device that can be used to -increase the total capacity of the pool. Uninitialized space consists of -any space on an EFI labeled vdev which has not been brought online -(i.e. zpool online -e). This space occurs when a LUN is dynamically expanded. -.RE - -.sp -.ne 2 -.na -\fB\fBfragmentation\fR\fR -.ad -.RS 20n +increase the total capacity of the pool. +Uninitialized space consists of any space on an EFI labeled vdev which has not +been brought online +.Po e.g, using +.Nm zpool Cm online Fl e +.Pc . +This space occurs when a LUN is dynamically expanded. +.It Sy fragmentation The amount of fragmentation in the pool. -.RE - -.sp -.ne 2 -.na -\fB\fBfree\fR\fR -.ad -.RS 20n +.It Sy free The amount of free space available in the pool. -.RE - -.sp -.ne 2 -.na -\fB\fBfreeing\fR\fR -.ad -.RS 20n +.It Sy freeing After a file system or snapshot is destroyed, the space it was using is -returned to the pool asynchronously. \fB\fBfreeing\fR\fR is the amount of -space remaining to be reclaimed. Over time \fB\fBfreeing\fR\fR will decrease -while \fB\fBfree\fR\fR increases. -.RE - -.sp -.ne 2 -.na -\fB\fBhealth\fR\fR -.ad -.RS 20n -The current health of the pool. Health can be "\fBONLINE\fR", "\fBDEGRADED\fR", "\fBFAULTED\fR", " \fBOFFLINE\fR", "\fBREMOVED\fR", or "\fBUNAVAIL\fR". -.RE - -.sp -.ne 2 -.na -\fB\fBguid\fR\fR -.ad -.RS 20n +returned to the pool asynchronously. +.Sy freeing +is the amount of space remaining to be reclaimed. +Over time +.Sy freeing +will decrease while +.Sy free +increases. +.It Sy health +The current health of the pool. +Health can be one of +.Sy ONLINE , DEGRADED , FAULTED , OFFLINE, REMOVED , UNAVAIL . +.It Sy guid A unique identifier for the pool. -.RE - -.sp -.ne 2 -.na -\fB\fBsize\fR\fR -.ad -.RS 20n +.It Sy size Total size of the storage pool. -.RE - -.sp -.ne 2 -.na -\fB\fBunsupported@\fR\fIfeature_guid\fR\fR -.ad -.RS 20n -.sp -Information about unsupported features that are enabled on the pool. See -\fBzpool-features\fR(5) for details. -.RE - -.sp -.ne 2 -.na -\fB\fBused\fR\fR -.ad -.RS 20n +.It Sy unsupported@ Ns Em feature_guid +Information about unsupported features that are enabled on the pool. +See +.Xr zpool-features 5 +for details. +.It Sy used Amount of storage space used within the pool. -.RE - -.sp -.LP -The space usage properties report actual physical space available to the storage pool. The physical space can be different from the total amount of space that any contained datasets can actually use. The amount of space used in a \fBraidz\fR configuration depends on the characteristics of the data being written. In addition, \fBZFS\fR reserves some space for internal accounting that the \fBzfs\fR(8) command takes into account, but the \fBzpool\fR command does not. For non-full pools of a reasonable size, these effects should be invisible. For small pools, or pools that are close to being completely full, these discrepancies may become more noticeable. - -.sp -.LP +.El +.Pp +The space usage properties report actual physical space available to the +storage pool. +The physical space can be different from the total amount of space that any +contained datasets can actually use. +The amount of space used in a raidz configuration depends on the characteristics +of the data being written. +In addition, ZFS reserves some space for internal accounting that the +.Xr zfs 8 +command takes into account, but the +.Nm +command does not. +For non-full pools of a reasonable size, these effects should be invisible. +For small pools, or pools that are close to being completely full, these +discrepancies may become more noticeable. +.Pp The following property can be set at creation time and import time: -.sp -.ne 2 -.na -\fB\fBaltroot\fR=(unset) | \fIpath\fR\fR -.ad -.sp .6 -.RS 4n -Alternate root directory. If set, this directory is prepended to any mount points within the pool. This can be used when examining an unknown pool where the mount points cannot be trusted, or in an alternate boot environment, where the typical paths are not valid. \fBaltroot\fR is not a persistent property. It is valid only while the system is up. Setting \fBaltroot\fR defaults to using \fBcachefile\fR=none, though this may be overridden using an explicit setting. -.RE - -.sp -.LP -The following property can only be set at import time: -.sp -.ne 2 -.na -\fB\fBreadonly\fR=\fBoff\fR | \fBon\fR\fR -.ad -.sp .6 -.RS 4n -If set to \fBon\fR, the pool will be imported in read-only mode: Synchronous data in the intent log will not be accessible, properties of the pool can not be changed and datasets of the pool can only be mounted read-only. The \fBreadonly\fR property of its datasets will be implicitly set to \fBon\fR. - -It can also be specified by its column name of \fBrdonly\fR. - -To write to a read-only pool, a export and import of the pool is required. -.RE - -.sp -.LP -The following properties can be set at creation time and import time, and later changed with the \fBzpool set\fR command: -.sp -.ne 2 -.na -\fB\fBashift\fR=\fIashift\fR\fR -.ad -.sp .6 -.RS 4n -Pool sector size exponent, to the power of 2 (internally referred to as "ashift"). Values from 9 to 16, inclusive, are valid; also, the special value 0 (the default) means to auto-detect using the kernel's block layer and a ZFS internal exception list. I/O operations will be aligned to the specified size boundaries. Additionally, the minimum (disk) write size will be set to the specified size, so this represents a space vs. performance trade-off. For optimal performance, the pool sector size should be greater than or equal to the sector size of the underlying disks. The typical case for setting this property is when performance is important and the underlying disks use 4KiB sectors but report 512B sectors to the OS (for compatibility reasons); in that case, set \fBashift=12\fR (which is 1<<12 = 4096). -.LP -When set, this property is used as the default hint value in \fIsubsequent\fR vdev operations (add, attach and replace). Changing this value will \fInot\fR modify any existing vdev, not even on disk replacement; however it can be used, for instance, to replace a dying 512B sectors disk with a newer 4KiB sectors device: this will probably result in bad performance but at the same time could prevent loss of data. -.RE - -.sp -.ne 2 -.na -\fB\fBautoexpand\fR=\fBoff\fR | \fBon\fR\fR -.ad -.sp .6 -.RS 4n -Controls automatic pool expansion when the underlying LUN is grown. If set to \fBon\fR, the pool will be resized according to the size of the expanded device. If the device is part of a mirror or \fBraidz\fR then all devices within that mirror/\fBraidz\fR group must be expanded before the new space is made available to the pool. The default behavior is \fBoff\fR. This property can also be referred to by its shortened column name, \fBexpand\fR. -.RE - -.sp -.ne 2 -.na -\fB\fBautoreplace\fR=\fBoff\fR | \fBon\fR\fR -.ad -.sp .6 -.RS 4n -Controls automatic device replacement. If set to "\fBoff\fR", device replacement must be initiated by the administrator by using the "\fBzpool replace\fR" command. If set to "\fBon\fR", any new device, found in the same physical location as a device that previously belonged to the pool, is automatically formatted and replaced. The default behavior is "\fBoff\fR". This property can also be referred to by its shortened column name, "replace". Autoreplace can also be used with virtual disks (like device mapper) provided that you use the /dev/disk/by-vdev paths setup by vdev_id.conf. See the vdev_id.conf man page for more details. Autoreplace and autoonline require libudev to be present at build time. If you're using device mapper disks, you must have libdevmapper installed at build time as well. -.RE - -.sp -.ne 2 -.na -\fB\fBbootfs\fR=(unset) | \fIpool\fR/\fIdataset\fR\fR -.ad -.sp .6 -.RS 4n -Identifies the default bootable dataset for the root pool. This property is expected to be set mainly by the installation and upgrade programs. Not all Linux distribution boot processes use the \fBbootfs\fR property. -.RE - -.sp -.ne 2 -.na -\fB\fBcachefile\fR=\fBnone\fR | \fIpath\fR\fR -.ad -.sp .6 -.RS 4n -Controls the location of where the pool configuration is cached. Discovering all pools on system startup requires a cached copy of the configuration data that is stored on the root file system. All pools in this cache are automatically imported when the system boots. Some environments, such as install and clustering, need to cache this information in a different location so that pools are not automatically imported. Setting this property caches the pool configuration in a different location that can later be imported with "\fBzpool import -c\fR". Setting it to the special value "\fBnone\fR" creates a temporary pool that is never cached, and the special value \fB\&''\fR (empty string) uses the default location. -.sp -Multiple pools can share the same cache file. Because the kernel destroys and recreates this file when pools are added and removed, care should be taken when attempting to access this file. When the last pool using a \fBcachefile\fR is exported or destroyed, the file is removed. -.RE - -.sp -.ne 2 -.na -\fB\fBcomment\fR=(unset) | \fB\fItext\fR\fR -.ad -.sp .6 -.RS 4n -A text string consisting of printable ASCII characters that will be stored such that it is available even if the pool becomes faulted. An administrator can provide additional information about a pool using this property. -.RE - -.sp -.ne 2 -.na -\fB\fBdedupditto\fR=\fB\fInumber\fR\fR -.ad -.sp .6 -.RS 4n -Threshold for the number of block ditto copies. If the reference count for a deduplicated block increases above this number, a new ditto copy of this block is automatically stored. The default setting is 0 which causes no ditto copies to be created for deduplicated blocks. The minimum valid nonzero setting is 100. -.RE - -.sp -.ne 2 -.na -\fB\fBdelegation\fR=\fBon\fR | \fBoff\fR\fR -.ad -.sp .6 -.RS 4n -Controls whether a non-privileged user is granted access based on the dataset permissions defined on the dataset. See \fBzfs\fR(8) for more information on \fBZFS\fR delegated administration. -.RE - -.sp -.ne 2 -.na -\fB\fBfailmode\fR=\fBwait\fR | \fBcontinue\fR | \fBpanic\fR\fR -.ad -.sp .6 -.RS 4n -Controls the system behavior in the event of catastrophic pool failure. This condition is typically a result of a loss of connectivity to the underlying storage device(s) or a failure of all devices within the pool. The behavior of such an event is determined as follows: -.sp -.ne 2 -.na -\fB\fBwait\fR\fR -.ad -.RS 12n -Blocks all \fBI/O\fR access until the device connectivity is recovered and the errors are cleared. This is the default behavior. -.RE - -.sp -.ne 2 -.na -\fB\fBcontinue\fR\fR -.ad -.RS 12n -Returns \fBEIO\fR to any new write \fBI/O\fR requests but allows reads to any of the remaining healthy devices. Any write requests that have yet to be committed to disk would be blocked. -.RE - -.sp -.ne 2 -.na -\fB\fBpanic\fR\fR -.ad -.RS 12n +.Bl -tag -width Ds +.It Sy altroot +Alternate root directory. +If set, this directory is prepended to any mount points within the pool. +This can be used when examining an unknown pool where the mount points cannot be +trusted, or in an alternate boot environment, where the typical paths are not +valid. +.Sy altroot +is not a persistent property. +It is valid only while the system is up. +Setting +.Sy altroot +defaults to using +.Sy cachefile Ns = Ns Sy none , +though this may be overridden using an explicit setting. +.El +.Pp +The following property can be set only at import time: +.Bl -tag -width Ds +.It Sy readonly Ns = Ns Sy on Ns | Ns Sy off +If set to +.Sy on , +the pool will be imported in read-only mode. +This property can also be referred to by its shortened column name, +.Sy rdonly . +.El +.Pp +The following properties can be set at creation time and import time, and later +changed with the +.Nm zpool Cm set +command: +.Bl -tag -width Ds +.It Sy ashift Ns = Ns Sy ashift +Pool sector size exponent, to the power of +.Sy 2 +(internally referred to as +.Sy ashift +). Values from 9 to 16, inclusive, are valid; also, the special +value 0 (the default) means to auto-detect using the kernel's block +layer and a ZFS internal exception list. I/O operations will be aligned +to the specified size boundaries. Additionally, the minimum (disk) +write size will be set to the specified size, so this represents a +space vs. performance trade-off. For optimal performance, the pool +sector size should be greater than or equal to the sector size of the +underlying disks. The typical case for setting this property is when +performance is important and the underlying disks use 4KiB sectors but +report 512B sectors to the OS (for compatibility reasons); in that +case, set +.Sy ashift=12 +(which is 1<<12 = 4096). When set, this property is +used as the default hint value in subsequent vdev operations (add, +attach and replace). Changing this value will not modify any existing +vdev, not even on disk replacement; however it can be used, for +instance, to replace a dying 512B sectors disk with a newer 4KiB +sectors device: this will probably result in bad performance but at the +same time could prevent loss of data. +.It Sy autoexpand Ns = Ns Sy on Ns | Ns Sy off +Controls automatic pool expansion when the underlying LUN is grown. +If set to +.Sy on , +the pool will be resized according to the size of the expanded device. +If the device is part of a mirror or raidz then all devices within that +mirror/raidz group must be expanded before the new space is made available to +the pool. +The default behavior is +.Sy off . +This property can also be referred to by its shortened column name, +.Sy expand . +.It Sy autoreplace Ns = Ns Sy on Ns | Ns Sy off +Controls automatic device replacement. +If set to +.Sy off , +device replacement must be initiated by the administrator by using the +.Nm zpool Cm replace +command. +If set to +.Sy on , +any new device, found in the same physical location as a device that previously +belonged to the pool, is automatically formatted and replaced. +The default behavior is +.Sy off . +This property can also be referred to by its shortened column name, +.Sy replace . +Autoreplace can also be used with virtual disks (like device +mapper) provided that you use the /dev/disk/by-vdev paths setup by +vdev_id.conf. See the +.Xr vdev_id 8 +man page for more details. +Autoreplace and autoonline require the ZFS Event Daemon be configured and +running. See the +.Xr zed 8 +man page for more details. +.It Sy bootfs Ns = Ns Sy (unset) Ns | Ns Ar pool Ns / Ns Ar dataset +Identifies the default bootable dataset for the root pool. This property is +expected to be set mainly by the installation and upgrade programs. +Not all Linux distribution boot processes use the bootfs property. +.It Sy cachefile Ns = Ns Ar path Ns | Ns Sy none +Controls the location of where the pool configuration is cached. +Discovering all pools on system startup requires a cached copy of the +configuration data that is stored on the root file system. +All pools in this cache are automatically imported when the system boots. +Some environments, such as install and clustering, need to cache this +information in a different location so that pools are not automatically +imported. +Setting this property caches the pool configuration in a different location that +can later be imported with +.Nm zpool Cm import Fl c . +Setting it to the special value +.Sy none +creates a temporary pool that is never cached, and the special value +.Qq +.Pq empty string +uses the default location. +.Pp +Multiple pools can share the same cache file. +Because the kernel destroys and recreates this file when pools are added and +removed, care should be taken when attempting to access this file. +When the last pool using a +.Sy cachefile +is exported or destroyed, the file is removed. +.It Sy comment Ns = Ns Ar text +A text string consisting of printable ASCII characters that will be stored +such that it is available even if the pool becomes faulted. +An administrator can provide additional information about a pool using this +property. +.It Sy dedupditto Ns = Ns Ar number +Threshold for the number of block ditto copies. +If the reference count for a deduplicated block increases above this number, a +new ditto copy of this block is automatically stored. +The default setting is +.Sy 0 +which causes no ditto copies to be created for deduplicated blocks. +The minimum legal nonzero setting is +.Sy 100 . +.It Sy delegation Ns = Ns Sy on Ns | Ns Sy off +Controls whether a non-privileged user is granted access based on the dataset +permissions defined on the dataset. +See +.Xr zfs 8 +for more information on ZFS delegated administration. +.It Sy failmode Ns = Ns Sy wait Ns | Ns Sy continue Ns | Ns Sy panic +Controls the system behavior in the event of catastrophic pool failure. +This condition is typically a result of a loss of connectivity to the underlying +storage device(s) or a failure of all devices within the pool. +The behavior of such an event is determined as follows: +.Bl -tag -width "continue" +.It Sy wait +Blocks all I/O access until the device connectivity is recovered and the errors +are cleared. +This is the default behavior. +.It Sy continue +Returns +.Er EIO +to any new write I/O requests but allows reads to any of the remaining healthy +devices. +Any write requests that have yet to be committed to disk would be blocked. +.It Sy panic Prints out a message to the console and generates a system crash dump. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBfeature@\fR\fIfeature_name\fR=\fBenabled\fR\fR -.ad -.RS 4n -The value of this property is the current state of \fIfeature_name\fR. The -only valid value when setting this property is \fBenabled\fR which moves -\fIfeature_name\fR to the enabled state. See \fBzpool-features\fR(5) for -details on feature states. -.RE - -.sp -.ne 2 -.na -\fB\fBlistsnapshots\fR=on | off\fR -.ad -.sp .6 -.RS 4n -Controls whether information about snapshots associated with this pool is output when "\fBzfs list\fR" is run without the \fB-t\fR option. The default value is "off". -.sp -This property can also be referred to by its shortened name, \fBlistsnaps\fR. -.RE - -.sp -.ne 2 -.na -\fB\fBversion\fR=(unset) | \fIversion\fR\fR -.ad -.sp .6 -.RS 4n -The current on-disk version of the pool. This can be increased, but never decreased. The preferred method of updating pools is with the "\fBzpool upgrade\fR" command, though this property can be used when a specific version is needed for backwards compatibility. Once feature flags are enabled on a pool this property will no longer have a value. -.RE - -.SS "Subcommands" -.sp -.LP -All subcommands that modify state are logged persistently to the pool in their original form. -.sp -.LP -The \fBzpool\fR command provides subcommands to create and destroy storage pools, add capacity to storage pools, and provide information about the storage pools. The following subcommands are supported: -.sp -.ne 2 -.na -\fB\fBzpool\fR \fB-?\fR\fR -.ad -.sp .6 -.RS 4n +.El +.It Sy feature@ Ns Ar feature_name Ns = Ns Sy enabled +The value of this property is the current state of +.Ar feature_name . +The only valid value when setting this property is +.Sy enabled +which moves +.Ar feature_name +to the enabled state. +See +.Xr zpool-features 5 +for details on feature states. +.It Sy listsnapshots Ns = Ns Sy on Ns | Ns Sy off +Controls whether information about snapshots associated with this pool is +output when +.Nm zfs Cm list +is run without the +.Fl t +option. +The default value is +.Sy off . +This property can also be referred to by its shortened name, +.Sy listsnaps . +.It Sy version Ns = Ns Ar version +The current on-disk version of the pool. +This can be increased, but never decreased. +The preferred method of updating pools is with the +.Nm zpool Cm upgrade +command, though this property can be used when a specific version is needed for +backwards compatibility. +Once feature flags are enabled on a pool this property will no longer have a +value. +.El +.Ss Subcommands +All subcommands that modify state are logged persistently to the pool in their +original form. +.Pp +The +.Nm +command provides subcommands to create and destroy storage pools, add capacity +to storage pools, and provide information about the storage pools. +The following subcommands are supported: +.Bl -tag -width Ds +.It Xo +.Nm +.Fl ? +.Xc Displays a help message. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool add\fR [\fB-fgLnP\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fIvdev\fR ...\fR -.ad -.sp .6 -.RS 4n -Adds the specified virtual devices to the given pool. The \fIvdev\fR specification is described in the "Virtual Devices" section. The behavior of the \fB-f\fR option, and the device checks performed are described in the "zpool create" subcommand. -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 6n -Forces use of \fBvdev\fRs, even if they appear in use or specify a conflicting replication level. Not all devices can be overridden in this manner. -.RE - -.sp -.ne 2 -.na -\fB\fB-g\fR\fR -.ad -.RS 6n -Display vdev GUIDs instead of the normal device names. These GUIDs can be used in place of device names for the zpool detach/offline/remove/replace commands. -.RE - -.sp -.ne 2 -.na -\fB\fB-L\fR\fR -.ad -.RS 6n -Display real paths for vdevs resolving all symbolic links. This can be used to look up the current block device name regardless of the /dev/disk/ path used to open it. -.RE - -.sp -.ne 2 -.na -\fB\fB-n\fR\fR -.ad -.RS 6n -Displays the configuration that would be used without actually adding the \fBvdev\fRs. The actual pool creation can still fail due to insufficient privileges or device sharing. -.RE - -.sp -.ne 2 -.na -\fB\fB-P\fR\fR -.ad -.RS 6n -Display full paths for vdevs instead of only the last component of the path. This can be used in conjunction with the \fB-L\fR flag. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIproperty=value\fR -.ad -.sp .6 -.RS 4n -Sets the given pool properties. See the "Properties" section for a list of valid properties that can be set. The only property supported at the moment is \fBashift\fR. -.RE - -Do not add a disk that is currently configured as a quorum device to a zpool. After a disk is in the pool, that disk can then be configured as a quorum device. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool attach\fR [\fB-f\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fIdevice\fR \fInew_device\fR\fR -.ad -.sp .6 -.RS 4n -Attaches \fInew_device\fR to an existing \fBzpool\fR device. The existing device cannot be part of a \fBraidz\fR configuration. If \fIdevice\fR is not currently part of a mirrored configuration, \fIdevice\fR automatically transforms into a two-way mirror of \fIdevice\fR and \fInew_device\fR. If \fIdevice\fR is part of a two-way mirror, attaching \fInew_device\fR creates a three-way mirror, and so on. In either case, \fInew_device\fR begins to resilver immediately. -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 6n -Forces use of \fInew_device\fR, even if its appears to be in use. Not all devices can be overridden in this manner. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIproperty=value\fR -.ad -.sp .6 -.RS 4n -Sets the given pool properties. See the "Properties" section for a list of valid properties that can be set. The only property supported at the moment is \fBashift\fR. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool clear\fR \fIpool\fR [\fIdevice\fR] ...\fR -.ad -.sp .6 -.RS 4n -Clears device errors in a pool. If no arguments are specified, all device errors within the pool are cleared. If one or more devices is specified, only those errors associated with the specified device or devices are cleared. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool create\fR [\fB-fnd\fR] [\fB-o\fR \fIproperty=value\fR] ... [\fB-o\fR feature@\fIfeature=value\fR] ... [\fB-O\fR \fIfile-system-property=value\fR] ... [\fB-m\fR \fImountpoint\fR] [\fB-R\fR \fIroot\fR] [\fB-t\fR \fItname\fR] \fIpool\fR \fIvdev\fR ...\fR -.ad -.sp .6 -.RS 4n -Creates a new storage pool containing the virtual devices specified on the command line. The pool name must begin with a letter, and can only contain alphanumeric characters as well as underscore ("_"), dash ("-"), period ("."), colon (":"), and space (" "). The pool names "mirror", "raidz", "spare" and "log" are reserved, as are names beginning with the pattern "c[0-9]". The \fBvdev\fR specification is described in the "Virtual Devices" section. -.sp -The command verifies that each device specified is accessible and not currently in use by another subsystem. There are some uses, such as being currently mounted, or specified as the dedicated dump device, that prevents a device from ever being used by \fBZFS\fR. Other uses, such as having a preexisting \fBUFS\fR file system, can be overridden with the \fB-f\fR option. -.sp -The command also checks that the replication strategy for the pool is consistent. An attempt to combine redundant and non-redundant storage in a single pool, or to mix disks and files, results in an error unless \fB-f\fR is specified. The use of differently sized devices within a single \fBraidz\fR or mirror group is also flagged as an error unless \fB-f\fR is specified. -.sp -Unless the \fB-R\fR option is specified, the default mount point is "/\fIpool\fR". The mount point must not exist or must be empty, or else the root dataset cannot be mounted. This can be overridden with the \fB-m\fR option. -.sp -By default all supported features are enabled on the new pool unless the \fB-d\fR option is specified. -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.sp .6 -.RS 4n -Forces use of \fBvdev\fRs, even if they appear in use or specify a conflicting replication level. Not all devices can be overridden in this manner. -.RE - -.sp -.ne 2 -.na -\fB\fB-n\fR\fR -.ad -.sp .6 -.RS 4n -Displays the configuration that would be used without actually creating the pool. The actual pool creation can still fail due to insufficient privileges or device sharing. -.RE - -.sp -.ne 2 -.na -\fB\fB-d\fR\fR -.ad -.sp .6 -.RS 4n -Do not enable any features on the new pool. Individual features can be enabled by setting their corresponding properties to \fBenabled\fR with the \fB-o\fR option. See \fBzpool-features\fR(5) for details about feature properties. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIproperty=value\fR [\fB-o\fR \fIproperty=value\fR] ...\fR -.ad -.sp .6 -.RS 4n -Sets the given pool properties. See the "Properties" section for a list of valid properties that can be set. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR feature@\fIfeature=value\fR [\fB-o\fR feature@\fIfeature=value\fR] ...\fR -.ad -.sp .6 -.RS 4n -Sets the given pool feature. See \fBzpool-features(5)\fR for a list of valid features that can be set. -.sp -Value can be either \fBdisabled\fR or \fBenabled\fR. -.RE - -.sp -.ne 2 -.na -\fB\fB-O\fR \fIfile-system-property=value\fR\fR -.ad -.br -.na -\fB[\fB-O\fR \fIfile-system-property=value\fR] ...\fR -.ad -.sp .6 -.RS 4n -Sets the given file system properties in the root file system of the pool. See the "Properties" section of \fBzfs\fR(8) for a list of valid properties that can be set. -.RE - -.sp -.ne 2 -.na -\fB\fB-R\fR \fIroot\fR\fR -.ad -.sp .6 -.RS 4n -Equivalent to "-o cachefile=none,altroot=\fIroot\fR" -.RE - -.sp -.ne 2 -.na -\fB\fB-m\fR \fImountpoint\fR\fR -.ad -.sp .6 -.RS 4n -Sets the mount point for the root dataset. The default mount point is "/\fIpool\fR" or "\fBaltroot\fR/\fIpool\fR" if \fBaltroot\fR is specified. The mount point must be an absolute path, "\fBlegacy\fR", or "\fBnone\fR". For more information on dataset mount points, see \fBzfs\fR(8). -.RE - -.sp -.ne 2 -.na -\fB\fB-t\fR \fItname\fR\fR -.ad -.sp .6 -.RS 4n -Sets the in-core pool name to "\fBtname\fR" while the on-disk name will be the name specified as the pool name "\fBpool\fR". This will set the default cachefile property to none. This is intended to handle name space collisions when creating pools for other systems, such as virtual machines or physical machines whose pools live on network block devices. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool destroy\fR [\fB-f\fR] \fIpool\fR\fR -.ad -.sp .6 -.RS 4n -Destroys the given pool, freeing up any devices for other use. This command tries to unmount any active datasets before destroying the pool. -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 6n +.It Xo +.Nm +.Cm add +.Op Fl fgLnP +.Oo Fl o Ar property Ns = Ns Ar value Oc +.Ar pool vdev Ns ... +.Xc +Adds the specified virtual devices to the given pool. +The +.Ar vdev +specification is described in the +.Sx Virtual Devices +section. +The behavior of the +.Fl f +option, and the device checks performed are described in the +.Nm zpool Cm create +subcommand. +.Bl -tag -width Ds +.It Fl f +Forces use of +.Ar vdev Ns s , +even if they appear in use or specify a conflicting replication level. +Not all devices can be overridden in this manner. +.It Fl g +Display +.Ar vdev , +GUIDs instead of the normal device names. These GUIDs can be used in place of +device names for the zpool detach/offline/remove/replace commands. +.It Fl L +Display real paths for +.Ar vdev Ns s +resolving all symbolic links. This can be used to look up the current block +device name regardless of the /dev/disk/ path used to open it. +.It Fl n +Displays the configuration that would be used without actually adding the +.Ar vdev Ns s . +The actual pool creation can still fail due to insufficient privileges or +device sharing. +.It Fl P +Display real paths for +.Ar vdev Ns s +instead of only the last component of the path. This can be used in +conjunction with the -L flag. +.It Fl o Ar property Ns = Ns Ar value +Sets the given pool properties. See the +.Sx Properties +section for a list of valid properties that can be set. The only property +supported at the moment is ashift. +.El +.It Xo +.Nm +.Cm attach +.Op Fl f +.Oo Fl o Ar property Ns = Ns Ar value Oc +.Ar pool device new_device +.Xc +Attaches +.Ar new_device +to the existing +.Ar device . +The existing device cannot be part of a raidz configuration. +If +.Ar device +is not currently part of a mirrored configuration, +.Ar device +automatically transforms into a two-way mirror of +.Ar device +and +.Ar new_device . +If +.Ar device +is part of a two-way mirror, attaching +.Ar new_device +creates a three-way mirror, and so on. +In either case, +.Ar new_device +begins to resilver immediately. +.Bl -tag -width Ds +.It Fl f +Forces use of +.Ar new_device , +even if its appears to be in use. +Not all devices can be overridden in this manner. +.It Fl o Ar property Ns = Ns Ar value +Sets the given pool properties. See the +.Sx Properties +section for a list of valid properties that can be set. The only property +supported at the moment is ashift. +.El +.It Xo +.Nm +.Cm clear +.Ar pool +.Op Ar device +.Xc +Clears device errors in a pool. +If no arguments are specified, all device errors within the pool are cleared. +If one or more devices is specified, only those errors associated with the +specified device or devices are cleared. +.It Xo +.Nm +.Cm create +.Op Fl dfn +.Op Fl m Ar mountpoint +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Oo Fl o Ar feature@feature Ns = Ns Ar value Oc Ns ... +.Oo Fl O Ar file-system-property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Op Fl t Ar tname +.Ar pool vdev Ns ... +.Xc +Creates a new storage pool containing the virtual devices specified on the +command line. +The pool name must begin with a letter, and can only contain +alphanumeric characters as well as underscore +.Pq Qq Sy _ , +dash +.Pq Qq Sy \&. , +colon +.Pq Qq Sy \&: , +space +.Pq Qq Sy - , +and period +.Pq Qq Sy \&. . +The pool names +.Sy mirror , +.Sy raidz , +.Sy spare +and +.Sy log +are reserved, as are names beginning with the pattern +.Sy c[0-9] . +The +.Ar vdev +specification is described in the +.Sx Virtual Devices +section. +.Pp +The command verifies that each device specified is accessible and not currently +in use by another subsystem. +There are some uses, such as being currently mounted, or specified as the +dedicated dump device, that prevents a device from ever being used by ZFS. +Other uses, such as having a preexisting UFS file system, can be overridden with +the +.Fl f +option. +.Pp +The command also checks that the replication strategy for the pool is +consistent. +An attempt to combine redundant and non-redundant storage in a single pool, or +to mix disks and files, results in an error unless +.Fl f +is specified. +The use of differently sized devices within a single raidz or mirror group is +also flagged as an error unless +.Fl f +is specified. +.Pp +Unless the +.Fl R +option is specified, the default mount point is +.Pa / Ns Ar pool . +The mount point must not exist or must be empty, or else the root dataset +cannot be mounted. +This can be overridden with the +.Fl m +option. +.Pp +By default all supported features are enabled on the new pool unless the +.Fl d +option is specified. +.Bl -tag -width Ds +.It Fl d +Do not enable any features on the new pool. +Individual features can be enabled by setting their corresponding properties to +.Sy enabled +with the +.Fl o +option. +See +.Xr zpool-features 5 +for details about feature properties. +.It Fl f +Forces use of +.Ar vdev Ns s , +even if they appear in use or specify a conflicting replication level. +Not all devices can be overridden in this manner. +.It Fl m Ar mountpoint +Sets the mount point for the root dataset. +The default mount point is +.Pa /pool +or +.Pa altroot/pool +if +.Ar altroot +is specified. +The mount point must be an absolute path, +.Sy legacy , +or +.Sy none . +For more information on dataset mount points, see +.Xr zfs 8 . +.It Fl n +Displays the configuration that would be used without actually creating the +pool. +The actual pool creation can still fail due to insufficient privileges or +device sharing. +.It Fl o Ar property Ns = Ns Ar value +Sets the given pool properties. +See the +.Sx Properties +section for a list of valid properties that can be set. +.It Fl o Ar feature@feature Ns = Ns Ar value +Sets the given pool feature. See the +.Xr zpool-features 5 +section for a list of valid features that can be set. +Value can be either disabled or enabled. +.It Fl O Ar file-system-property Ns = Ns Ar value +Sets the given file system properties in the root file system of the pool. +See the +.Sx Properties +section of +.Xr zfs 8 +for a list of valid properties that can be set. +.It Fl R Ar root +Equivalent to +.Fl o Sy cachefile Ns = Ns Sy none Fl o Sy altroot Ns = Ns Ar root +.It Fl t Ar tname +Sets the in-core pool name to +.Sy tname +while the on-disk name will be the name specified as the pool name +.Sy pool . +This will set the default cachefile property to none. This is intended +to handle name space collisions when creating pools for other systems, +such as virtual machines or physical machines whose pools live on network +block devices. +.El +.It Xo +.Nm +.Cm destroy +.Op Fl f +.Ar pool +.Xc +Destroys the given pool, freeing up any devices for other use. +This command tries to unmount any active datasets before destroying the pool. +.Bl -tag -width Ds +.It Fl f Forces any active datasets contained within the pool to be unmounted. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool detach\fR \fIpool\fR \fIdevice\fR\fR -.ad -.sp .6 -.RS 4n -Detaches \fIdevice\fR from a mirror. The operation is refused if there are no other valid replicas of the data. If \fIdevice\fR may be re-added to the pool later on then consider the "\fBzpool offline\fR" command instead. -.RE - -.RE - -.sp -.ne 2 -.na -\fBzpool events\fR [\fB-vHfc\fR] [\fIpool\fR] ... -.ad -.sp .6 -.RS 4n -Description of the different events generated by the ZFS kernel modules. See \fBzfs-events\fR(5) for more information about the subclasses and event payloads that can be generated. - -.sp -.ne 2 -.na -\fB\fB-v\fR\fR -.ad -.RS 6n -Get a full detail of the events and what information is available about it. -.RE - -.sp -.ne 2 -.na -\fB\fB-H\fR\fR -.ad -.RS 6n -Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -.RE - -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 6n -Follow mode. -.RE - -.sp -.ne 2 -.na -\fB\fB-c\fR\fR -.ad -.RS 6n +.El +.It Xo +.Nm +.Cm detach +.Ar pool device +.Xc +Detaches +.Ar device +from a mirror. +The operation is refused if there are no other valid replicas of the data. +If device may be re-added to the pool later on then consider the +.Sy zpool offline +command instead. +.It Xo +.Nm +.Cm events +.Op Fl cfHv +.Op Ar pool Ns ... +.Xc +Lists all recent events generated by the ZFS kernel modules. These events +are consumed by the +.Xr zed 8 +and used to automate administrative tasks such as replacing a failed device +with a hot spare. For more information about the subclasses and event payloads +that can be generated see the +.Xr zfs-events 5 +man page. +.Bl -tag -width Ds +.It Fl c Clear all previous events. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool export\fR [\fB-a\fR] [\fB-f\fR] \fIpool\fR ...\fR -.ad -.sp .6 -.RS 4n -Exports the given pools from the system. All devices are marked as exported, but are still considered in use by other subsystems. The devices can be moved between systems (even those of different endianness) and imported as long as a sufficient number of devices are present. -.sp -Before exporting the pool, all datasets within the pool are unmounted. A pool can not be exported if it has a shared spare that is currently being used. -.sp -For pools to be portable, you must give the \fBzpool\fR command whole disks, not just partitions, so that \fBZFS\fR can label the disks with portable \fBEFI\fR labels. Otherwise, disk drivers on platforms of different endianness will not recognize the disks. -.sp -.ne 2 -.na -\fB\fB-a\fR\fR -.ad -.RS 6n +.It Fl f +Follow mode. +.It Fl H +Scripted mode. Do not display headers, and separate fields by a +single tab instead of arbitrary space. +.It Fl v +Print the entire payload for each event. +.El +.It Xo +.Nm +.Cm export +.Op Fl a +.Op Fl f +.Ar pool Ns ... +.Xc +Exports the given pools from the system. +All devices are marked as exported, but are still considered in use by other +subsystems. +The devices can be moved between systems +.Pq even those of different endianness +and imported as long as a sufficient number of devices are present. +.Pp +Before exporting the pool, all datasets within the pool are unmounted. +A pool can not be exported if it has a shared spare that is currently being +used. +.Pp +For pools to be portable, you must give the +.Nm +command whole disks, not just partitions, so that ZFS can label the disks with +portable EFI labels. +Otherwise, disk drivers on platforms of different endianness will not recognize +the disks. +.Bl -tag -width Ds +.It Fl a Exports all pools imported on the system. -.RE - -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 6n -Forcefully unmount all datasets, using the "\fBunmount -f\fR" command. -.sp -This command will forcefully export the pool even if it has a shared spare that is currently being used. This may lead to potential data corruption. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool get\fR [\fB-Hp\fR] [\fB-o \fR\fIfield\fR[,...]] "\fIall\fR" | \fIproperty\fR[,...] -\fIpool\fR ...\fR -.ad -.sp .6 -.RS 4n -Retrieves the given list of properties (or all properties if "\fBall\fR" is used) for the specified storage pool(s). These properties are displayed with the following fields: -.sp -.in +2 -.nf +.It Fl f +Forcefully unmount all datasets, using the +.Nm unmount Fl f +command. +.Pp +This command will forcefully export the pool even if it has a shared spare that +is currently being used. +This may lead to potential data corruption. +.El +.It Xo +.Nm +.Cm get +.Op Fl Hp +.Op Fl o Ar field Ns Oo , Ns Ar field Oc Ns ... +.Sy all Ns | Ns Ar property Ns Oo , Ns Ar property Oc Ns ... +.Ar pool Ns ... +.Xc +Retrieves the given list of properties +.Po +or all properties if +.Sy all +is used +.Pc +for the specified storage pool(s). +These properties are displayed with the following fields: +.Bd -literal name Name of storage pool property Property name value Property value source Property source, either 'default' or 'local'. -.fi -.in -2 -.sp - -See the "Properties" section for more information on the available pool properties. - -.sp -.ne 2 -.na -\fB\fB-H\fR\fR -.ad -.RS 6n -Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -.RE - -.sp -.ne 2 -.na -\fB\fB-p\fR\fR -.ad -.RS 6n -Display numbers in parsable (exact) values. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIfield\fR\fR -.ad -.RS 12n -A comma-separated list of columns to display. \fBname,property,value,source\fR +.Ed +.Pp +See the +.Sx Properties +section for more information on the available pool properties. +.Bl -tag -width Ds +.It Fl H +Scripted mode. +Do not display headers, and separate fields by a single tab instead of arbitrary +space. +.It Fl o Ar field +A comma-separated list of columns to display. +.Sy name Ns , Ns Sy property Ns , Ns Sy value Ns , Ns Sy source is the default value. -.RE -.RE - -.sp -.ne 2 -.na -\fB\fBzpool history\fR [\fB-il\fR] [\fIpool\fR] ...\fR -.ad -.sp .6 -.RS 4n -Displays the command history of the specified pools or all pools if no pool is specified. -.sp -.ne 2 -.na -\fB\fB-i\fR\fR -.ad -.RS 6n -Displays internally logged \fBZFS\fR events in addition to user initiated events. -.RE - -.sp -.ne 2 -.na -\fB\fB-l\fR\fR -.ad -.RS 6n -Displays log records in long format, which in addition to standard format includes, the user name, the hostname, and the zone in which the operation was performed. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool import\fR [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR] [\fB-D\fR]\fR -.ad -.sp .6 -.RS 4n -Lists pools available to import. If the \fB-d\fR option is not specified, this command searches for devices in "/dev". The \fB-d\fR option can be specified multiple times, and all directories are searched. If the device appears to be part of an exported pool, this command displays a summary of the pool with the name of the pool, a numeric identifier, as well as the \fIvdev\fR layout and current health of the device for each device or file. Destroyed pools, pools that were previously destroyed with the "\fBzpool destroy\fR" command, are not listed unless the \fB-D\fR option is specified. -.sp -The numeric identifier is unique, and can be used instead of the pool name when multiple exported pools of the same name are available. -.sp -.ne 2 -.na -\fB\fB-c\fR \fIcachefile\fR\fR -.ad -.RS 16n -Reads configuration from the given \fBcachefile\fR that was created with the "\fBcachefile\fR" pool property. This \fBcachefile\fR is used instead of searching for devices. -.RE - -.sp -.ne 2 -.na -\fB\fB-d\fR \fIdir\fR\fR -.ad -.RS 16n -Searches for devices or files in \fIdir\fR. The \fB-d\fR option can be specified multiple times. -.RE - -.sp -.ne 2 -.na -\fB\fB-D\fR\fR -.ad -.RS 16n +.It Fl p +Display numbers in parsable (exact) values. +.El +.It Xo +.Nm +.Cm history +.Op Fl il +.Oo Ar pool Oc Ns ... +.Xc +Displays the command history of the specified pool(s) or all pools if no pool is +specified. +.Bl -tag -width Ds +.It Fl i +Displays internally logged ZFS events in addition to user initiated events. +.It Fl l +Displays log records in long format, which in addition to standard format +includes, the user name, the hostname, and the zone in which the operation was +performed. +.El +.It Xo +.Nm +.Cm import +.Op Fl D +.Op Fl c Ar cachefile Ns | Ns Fl d Ar dir +.Xc +Lists pools available to import. +If the +.Fl d +option is not specified, this command searches for devices in +.Pa /dev . +The +.Fl d +option can be specified multiple times, and all directories are searched. +If the device appears to be part of an exported pool, this command displays a +summary of the pool with the name of the pool, a numeric identifier, as well as +the vdev layout and current health of the device for each device or file. +Destroyed pools, pools that were previously destroyed with the +.Nm zpool Cm destroy +command, are not listed unless the +.Fl D +option is specified. +.Pp +The numeric identifier is unique, and can be used instead of the pool name when +multiple exported pools of the same name are available. +.Bl -tag -width Ds +.It Fl c Ar cachefile +Reads configuration from the given +.Ar cachefile +that was created with the +.Sy cachefile +pool property. +This +.Ar cachefile +is used instead of searching for devices. +.It Fl d Ar dir +Searches for devices or files in +.Ar dir . +The +.Fl d +option can be specified multiple times. +.It Fl D Lists destroyed pools only. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool import\fR [\fB-o\fR \fImntopts\fR] [ \fB-o\fR \fIproperty\fR=\fIvalue\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR] [\fB-D\fR] [\fB-f\fR] [\fB-m\fR] [\fB-N\fR] [\fB-R\fR \fIroot\fR] [\fB-F\fR [\fB-n\fR]] [\fB-s\fR] \fB-a\fR\fR -.ad -.sp .6 -.RS 4n -Imports all pools found in the search directories. Identical to the previous command, except that all pools with a sufficient number of devices available are imported. Destroyed pools, pools that were previously destroyed with the "\fBzpool destroy\fR" command, will not be imported unless the \fB-D\fR option is specified. -.sp -.ne 2 -.na -\fB\fB-o\fR \fImntopts\fR\fR -.ad -.RS 21n -Comma-separated list of mount options to use when mounting datasets within the pool. See \fBzfs\fR(8) for a description of dataset properties and mount options. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIproperty=value\fR\fR -.ad -.RS 21n -Sets the specified property on the imported pool. See the "Properties" section for more information on the available pool properties. -.RE - -.sp -.ne 2 -.na -\fB\fB-c\fR \fIcachefile\fR\fR -.ad -.RS 21n -Reads configuration from the given \fBcachefile\fR that was created with the "\fBcachefile\fR" pool property. This \fBcachefile\fR is used instead of searching for devices. -.RE - -.sp -.ne 2 -.na -\fB\fB-d\fR \fIdir\fR\fR -.ad -.RS 21n -Searches for devices or files in \fIdir\fR. The \fB-d\fR option can be specified multiple times. This option is incompatible with the \fB-c\fR option. -.RE - -.sp -.ne 2 -.na -\fB\fB-D\fR\fR -.ad -.RS 21n -Imports destroyed pools only. The \fB-f\fR option is also required. -.RE - -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 21n -Forces import, even if the pool appears to be potentially active. -.RE - -.sp -.ne 2 -.na -\fB\fB-F\fR\fR -.ad -.RS 21n -Recovery mode for a non-importable pool. Attempt to return the pool to an importable state by discarding the last few transactions. Not all damaged pools can be recovered by using this option. If successful, the data from the discarded transactions is irretrievably lost. This option is ignored if the pool is importable or already imported. -.RE - -.sp -.ne 2 -.na -\fB\fB-a\fR\fR -.ad -.RS 21n +.El +.It Xo +.Nm +.Cm import +.Fl a +.Op Fl DfmN +.Op Fl F Oo Fl n Oc Oo Fl T Oc Oo Fl X Oc +.Op Fl c Ar cachefile Ns | Ns Fl d Ar dir +.Op Fl o Ar mntopts +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Op Fl s +.Xc +Imports all pools found in the search directories. +Identical to the previous command, except that all pools with a sufficient +number of devices available are imported. +Destroyed pools, pools that were previously destroyed with the +.Nm zpool Cm destroy +command, will not be imported unless the +.Fl D +option is specified. +.Bl -tag -width Ds +.It Fl a Searches for and imports all pools found. -.RE - -.sp -.ne 2 -.na -\fB\fB-m\fR\fR -.ad -.RS 21n +.It Fl c Ar cachefile +Reads configuration from the given +.Ar cachefile +that was created with the +.Sy cachefile +pool property. +This +.Ar cachefile +is used instead of searching for devices. +.It Fl d Ar dir +Searches for devices or files in +.Ar dir . +The +.Fl d +option can be specified multiple times. +This option is incompatible with the +.Fl c +option. +.It Fl D +Imports destroyed pools only. +The +.Fl f +option is also required. +.It Fl f +Forces import, even if the pool appears to be potentially active. +.It Fl F +Recovery mode for a non-importable pool. +Attempt to return the pool to an importable state by discarding the last few +transactions. +Not all damaged pools can be recovered by using this option. +If successful, the data from the discarded transactions is irretrievably lost. +This option is ignored if the pool is importable or already imported. +.It Fl m Allows a pool to import when there is a missing log device. -.RE - -.sp -.ne 2 -.na -\fB\fB-R\fR \fIroot\fR\fR -.ad -.RS 21n -Sets the "\fBcachefile\fR" property to "\fBnone\fR" and the "\fIaltroot\fR" property to "\fIroot\fR". -.RE - -.sp -.ne 2 -.na -\fB\fB-N\fR\fR -.ad -.RS 21n +Recent transactions can be lost because the log device will be discarded. +.It Fl n +Used with the +.Fl F +recovery option. +Determines whether a non-importable pool can be made importable again, but does +not actually perform the pool recovery. +For more details about pool recovery mode, see the +.Fl F +option, above. +.It Fl N Import the pool without mounting any file systems. -.RE - -.sp -.ne 2 -.na -\fB\fB-n\fR\fR -.ad -.RS 21n -Used with the \fB-F\fR recovery option. Determines whether a non-importable pool can be made importable again, but does not actually perform the pool recovery. For more details about pool recovery mode, see the \fB-F\fR option, above. -.RE - -.sp -.ne 2 -.na -\fB\fB-X\fR\fR -.ad -.RS 21n -Used with the \fB-F\fR recovery option. Determines whether extreme measures to find a valid txg should take place. This allows the pool to be rolled back to a txg which is no longer guaranteed to be consistent. Pools imported at an inconsistent txg may contain uncorrectable checksum errors. For more details about pool recovery mode, see the \fB-F\fR option, above. -\fBWARNING\fR: This option can be extremely hazardous to the health of your pool and should only be used as a last resort. -.RE - -.sp -.ne 2 -.na -\fB\fB-T\fR\fR -.ad -.RS 21n -Specify the txg to use for rollback. Implies \fB-FX\fR. For more details about pool recovery mode, see the \fB-X\fR option, above. -\fBWARNING\fR: This option can be extremely hazardous to the health of your pool and should only be used as a last resort. -.RE - -.sp -.ne 2 -.na -\fB\fB-s\fR -.ad -.RS 21n -Scan using the default search path, the libblkid cache will not be consulted. A custom search path may be specified by setting the \fBZPOOL_IMPORT_PATH\fR environment variable. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool import\fR [\fB-o\fR \fImntopts\fR] [ \fB-o\fR \fIproperty\fR=\fIvalue\fR] ... [\fB-d\fR \fIdir\fR | \fB-c\fR \fIcachefile\fR] [\fB-D\fR] [\fB-f\fR] [\fB-m\fR] [\fB-R\fR \fIroot\fR] [\fB-F\fR [\fB-n\fR]] [\fB-t\fR]] [\fB-s\fR] \fIpool\fR | \fIid\fR [\fInewpool\fR]\fR -.ad -.sp .6 -.RS 4n -Imports a specific pool. A pool can be identified by its name or the numeric identifier. If \fInewpool\fR is specified, the pool is imported using the name \fInewpool\fR. Otherwise, it is imported with the same name as its exported name. -.sp -If a device is removed from a system without running "\fBzpool export\fR" first, the device appears as potentially active. It cannot be determined if this was a failed export, or whether the device is really in use from another host. To import a pool in this state, the \fB-f\fR option is required. -.sp -.ne 2 -.na -\fB\fB-o\fR \fImntopts\fR\fR -.ad -.sp .6 -.RS 4n -Comma-separated list of mount options to use when mounting datasets within the pool. See \fBzfs\fR(8) for a description of dataset properties and mount options. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIproperty=value\fR\fR -.ad -.sp .6 -.RS 4n -Sets the specified property on the imported pool. See the "Properties" section for more information on the available pool properties. -.RE - -.sp -.ne 2 -.na -\fB\fB-c\fR \fIcachefile\fR\fR -.ad -.sp .6 -.RS 4n -Reads configuration from the given \fBcachefile\fR that was created with the "\fBcachefile\fR" pool property. This \fBcachefile\fR is used instead of searching for devices. -.RE - -.sp -.ne 2 -.na -\fB\fB-d\fR \fIdir\fR\fR -.ad -.sp .6 -.RS 4n -Searches for devices or files in \fIdir\fR. The \fB-d\fR option can be specified multiple times. This option is incompatible with the \fB-c\fR option. -.RE - -.sp -.ne 2 -.na -\fB\fB-D\fR\fR -.ad -.sp .6 -.RS 4n -Imports destroyed pool. The \fB-f\fR option is also required. -.RE - -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.sp .6 -.RS 4n +.It Fl o Ar mntopts +Comma-separated list of mount options to use when mounting datasets within the +pool. +See +.Xr zfs 8 +for a description of dataset properties and mount options. +.It Fl o Ar property Ns = Ns Ar value +Sets the specified property on the imported pool. +See the +.Sx Properties +section for more information on the available pool properties. +.It Fl R Ar root +Sets the +.Sy cachefile +property to +.Sy none +and the +.Sy altroot +property to +.Ar root . +.It Fl s +Scan using the default search path, the libblkid cache will not be +consulted. A custom search path may be specified by setting the +ZPOOL_IMPORT_PATH environment variable. +.It Fl X +Used with the +.Fl F +recovery option. Determines whether extreme +measures to find a valid txg should take place. This allows the pool to +be rolled back to a txg which is no longer guaranteed to be consistent. +Pools imported at an inconsistent txg may contain uncorrectable +checksum errors. For more details about pool recovery mode, see the +.Fl F +option, above. WARNING: This option can be extremely hazardous to the +health of your pool and should only be used as a last resort. +.It Fl T +Specify the txg to use for rollback. Implies +.Fl FX . +For more details +about pool recovery mode, see the +.Fl X +option, above. WARNING: This option can be extremely hazardous to the +health of your pool and should only be used as a last resort. +.El +.It Xo +.Nm +.Cm import +.Op Fl Dfm +.Op Fl F Oo Fl n Oc Oo Fl t Oc Oo Fl T Oc Oo Fl X Oc +.Op Fl c Ar cachefile Ns | Ns Fl d Ar dir +.Op Fl o Ar mntopts +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Op Fl s +.Ar pool Ns | Ns Ar id +.Op Ar newpool +.Xc +Imports a specific pool. +A pool can be identified by its name or the numeric identifier. +If +.Ar newpool +is specified, the pool is imported using the name +.Ar newpool . +Otherwise, it is imported with the same name as its exported name. +.Pp +If a device is removed from a system without running +.Nm zpool Cm export +first, the device appears as potentially active. +It cannot be determined if this was a failed export, or whether the device is +really in use from another host. +To import a pool in this state, the +.Fl f +option is required. +.Bl -tag -width Ds +.It Fl c Ar cachefile +Reads configuration from the given +.Ar cachefile +that was created with the +.Sy cachefile +pool property. +This +.Ar cachefile +is used instead of searching for devices. +.It Fl d Ar dir +Searches for devices or files in +.Ar dir . +The +.Fl d +option can be specified multiple times. +This option is incompatible with the +.Fl c +option. +.It Fl D +Imports destroyed pool. +The +.Fl f +option is also required. +.It Fl f Forces import, even if the pool appears to be potentially active. -.RE - -.sp -.ne 2 -.na -\fB\fB-F\fR\fR -.ad -.sp .6 -.RS 4n -Recovery mode for a non-importable pool. Attempt to return the pool to an importable state by discarding the last few transactions. Not all damaged pools can be recovered by using this option. If successful, the data from the discarded transactions is irretrievably lost. This option is ignored if the pool is importable or already imported. -.RE - -.sp -.ne 2 -.na -\fB\fB-R\fR \fIroot\fR\fR -.ad -.sp .6 -.RS 4n -Sets the "\fBcachefile\fR" property to "\fBnone\fR" and the "\fIaltroot\fR" property to "\fIroot\fR". -.RE - -.sp -.ne 2 -.na -\fB\fB-n\fR\fR -.ad -.sp .6 -.RS 4n -Used with the \fB-F\fR recovery option. Determines whether a non-importable pool can be made importable again, but does not actually perform the pool recovery. For more details about pool recovery mode, see the \fB-F\fR option, above. -.RE - -.sp -.ne 2 -.na -\fB\fB-X\fR\fR -.ad -.sp .6 -.RS 4n -Used with the \fB-F\fR recovery option. Determines whether extreme measures to find a valid txg should take place. This allows the pool to be rolled back to a txg which is no longer guaranteed to be consistent. Pools imported at an inconsistent txg may contain uncorrectable checksum errors. For more details about pool recovery mode, see the \fB-F\fR option, above. -\fBWARNING\fR: This option can be extremely hazardous to the health of your pool and should only be used as a last resort. -.RE - -.sp -.ne 2 -.na -\fB\fB-T\fR\fR -.ad -.sp .6 -.RS 4n -Specify the txg to use for rollback. Implies \fB-FX\fR. For more details about pool recovery mode, see the \fB-X\fR option, above. -\fBWARNING\fR: This option can be extremely hazardous to the health of your pool and should only be used as a last resort. -.RE - -.sp -.ne 2 -.na -\fB\fB-t\fR\fR -.ad -.sp .6 -.RS 4n -Used with "\fBnewpool\fR". Specifies that "\fBnewpool\fR" is temporary. Temporary pool names last until export. Ensures that the original pool name will be used in all label updates and therefore is retained upon export. Will also set -o cachefile=none when not explicitly specified. -.RE - -.sp -.ne 2 -.na -\fB\fB-m\fR\fR -.ad -.sp .6 -.RS 4n +.It Fl F +Recovery mode for a non-importable pool. +Attempt to return the pool to an importable state by discarding the last few +transactions. +Not all damaged pools can be recovered by using this option. +If successful, the data from the discarded transactions is irretrievably lost. +This option is ignored if the pool is importable or already imported. +.It Fl m Allows a pool to import when there is a missing log device. -.RE - -.sp -.ne 2 -.na -\fB\fB-s\fR -.ad -.sp .6 -.RS 4n -Scan using the default search path, the libblkid cache will not be consulted. A custom search path may be specified by setting the \fBZPOOL_IMPORT_PATH\fR environment variable. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool iostat\fR [[[\fB-c\fR \fBSCRIPT\fR] [\fB-lq\fR]] | \fB-rw\fR] [\fB-T\fR \fBd\fR | \fBu\fR] [\fB-ghHLpPvy\fR] [[\fIpool\fR ...]|[\fIpool vdev\fR ...]|[\fIvdev\fR ...]] [\fIinterval\fR[\fIcount\fR]]\fR - -.ad -.sp .6 -.RS 4n -Displays \fBI/O\fR statistics for the given \fIpool\fRs/\fIvdev\fRs. You can -pass in a list of \fIpool\fRs, a \fIpool\fR and list of \fIvdev\fRs in that -\fIpool\fR, or a list of any \fIvdev\fRs from any \fIpool\fR. If no items are -specified, statistics for every pool in the system are shown. When given an -interval, the statistics are printed every \fIinterval\fR seconds until -\fBCtrl-C\fR is pressed. If \fIcount\fR is specified, the command exits after -\fIcount\fR reports are printed. The first report printed is always the -statistics since boot regardless of whether \fIinterval\fR and \fIcount\fR -are passed. However, this behavior can be suppressed with the -y flag. Also -note that the units of 'K', 'M', 'G'... that are printed in the report are in -base 1024. To get the raw values, use the \fB-p\fR flag. -.sp -.ne 2 -.na -\fB\fB-c\fR \fB[SCRIPT1,SCRIPT2,...]\fR -.ad -.RS 12n -Run a script (or scripts) on each vdev and include the output in zpool iostat -.sp -The \fB-c\fR option allows you to run script(s) for each vdev and display the -output in zpool iostat. For security reasons, a user can only execute scripts -as an unprivileged user. By default, a user may run a script from ~/.zpool.d -or /etc/zfs/zpool.d. The default search path can be overriden by setting -the \fBZPOOL_SCRIPTS_PATH\fR environment variable. A privileged user can run -\fB-c\fR if they have the \fBZPOOL_SCRIPTS_AS_ROOT\fR environment variable set. -If a script requires the use of a privileged command (like \fBsmartctl(8)\fR) -then it's recommended you allow the user access to it in /etc/sudoers or add -the user to the /etc/sudoers.d/zfs file. - -If \fB-c\fR is passed without a script name, it prints a list of all scripts. -\fB-c\fR also sets verbose mode (\fB-v\fR). - -Script output should be in the form of "name=value". The column name is -set to "name" and the value is set to "value". Multiple lines can be used to -output multiple columns. The first line of output not in the "name=value" -format is displayed without a column title, and no more output after that is -displayed. This can be useful for printing error messages. Blank or NULL -values are printed as a '-' to make output awk-able. - +Recent transactions can be lost because the log device will be discarded. +.It Fl n +Used with the +.Fl F +recovery option. +Determines whether a non-importable pool can be made importable again, but does +not actually perform the pool recovery. +For more details about pool recovery mode, see the +.Fl F +option, above. +.It Fl o Ar mntopts +Comma-separated list of mount options to use when mounting datasets within the +pool. +See +.Xr zfs 8 +for a description of dataset properties and mount options. +.It Fl o Ar property Ns = Ns Ar value +Sets the specified property on the imported pool. +See the +.Sx Properties +section for more information on the available pool properties. +.It Fl R Ar root +Sets the +.Sy cachefile +property to +.Sy none +and the +.Sy altroot +property to +.Ar root . +.It Fl s +Scan using the default search path, the libblkid cache will not be +consulted. A custom search path may be specified by setting the +ZPOOL_IMPORT_PATH environment variable. +.It Fl X +Used with the +.Fl F +recovery option. Determines whether extreme +measures to find a valid txg should take place. This allows the pool to +be rolled back to a txg which is no longer guaranteed to be consistent. +Pools imported at an inconsistent txg may contain uncorrectable +checksum errors. For more details about pool recovery mode, see the +.Fl F +option, above. WARNING: This option can be extremely hazardous to the +health of your pool and should only be used as a last resort. +.It Fl T +Specify the txg to use for rollback. Implies +.Fl FX . +For more details +about pool recovery mode, see the +.Fl X +option, above. WARNING: This option can be extremely hazardous to the +health of your pool and should only be used as a last resort. +.It Fl s +Used with +.Sy newpool . +Specifies that +.Sy newpool +is temporary. Temporary pool names last until export. Ensures that +the original pool name will be used in all label updates and therefore +is retained upon export. +Will also set -o cachefile=none when not explicitly specified. +.El +.It Xo +.Nm +.Cm iostat +.Op Oo Oo Fl c Ar SCRIPT Oc Oo Fl lq Oc Oc Ns | Ns Fl rw +.Op Fl T Sy u Ns | Ns Sy d +.Op Fl ghHLpPvy +.Oo Oo Ar pool Ns ... Oc Ns | Ns Oo Ar pool vdev Ns ... Oc Ns | Ns Oo Ar vdev Ns ... Oc Oc +.Op Ar interval Op Ar count +.Xc +Displays I/O statistics for the given pools/vdevs. You can pass in a +list of pools, a pool and list of vdevs in that pool, or a list of any +vdevs from any pool. If no items are specified, statistics for every +pool in the system are shown. +When given an +.Ar interval , +the statistics are printed every +.Ar interval +seconds until ^C is pressed. If count is specified, the command exits +after count reports are printed. The first report printed is always +the statistics since boot regardless of whether +.Ar interval +and +.Ar count +are passed. However, this behavior can be suppressed with the +.Fl y +flag. Also note that the units of +.Sy K , +.Sy M , +.Sy G ... +that are printed in the report are in base 1024. To get the raw +values, use the +.Fl p +flag. +.Bl -tag -width Ds +.It Fl c Op Ar SCRIPT1 , Ar SCRIPT2 ... +Run a script (or scripts) on each vdev and include the output as a new column +in the +.Nm zpool Cm iostat +output. Users can run any script found in their +.Pa ~/.zpool.d +directory or from the system +.Pa /etc/zfs/zpool.d +directory. The default search path can be overridden by setting the +ZPOOL_SCRIPTS_PATH environment variable. A privileged user can run +.Fl c +if they have the ZPOOL_SCRIPTS_AS_ROOT +environment variable set. If a script requires the use of a privileged +command, like +.Xr smartctl 8 +, then it's recommended you allow the user access to it in +.Pa /etc/sudoers +or add the user to the +.Pa /etc/sudoers.d/zfs +file. +.Pp +If +.Fl c +is passed without a script name, it prints a list of all scripts. +.Fl c +also sets verbose mode ( +.Fl c ). +.Pp +Script output should be in the form of "name=value". The column name is +set to "name" and the value is set to "value". Multiple lines can be +used to output multiple columns. The first line of output not in the +"name=value" format is displayed without a column title, and no more +output after that is displayed. This can be useful for printing error +messages. Blank or NULL values are printed as a '-' to make output +awk-able. +.Pp The following environment variables are set before running each script: -.sp -\fB$VDEV_PATH\fR: Full path to the vdev. -.LP -\fB$VDEV_UPATH\fR: "Underlying path" to the vdev. For device mapper, multipath, or -partitioned vdevs, \fBVDEV_UPATH\fR is the actual underlying /dev/sd* disk. -This can be useful if the command you're running requires a /dev/sd* device. -.LP -\fB$VDEV_ENC_SYSFS_PATH\fR: The sysfs path to the vdev's enclosure LEDs (if any). -.RE - -.sp -.ne 2 -.na -\fB\fB-T\fR \fBu\fR | \fBd\fR\fR -.ad -.RS 12n +.Pp +.Bl -tag -width "VDEV_PATH" +.It Sy VDEV_PATH +Full path to the vdev +.El +.Bl -tag -width "VDEV_UPATH" +.It Sy VDEV_UPATH +Underlying path to the vdev (/dev/sd*). For use with device mapper, +multipath, or partitioned vdevs. +.El +.Bl -tag -width "VDEV_ENC_SYSFS_PATH" +.It Sy VDEV_ENC_SYSFS_PATH +The sysfs path to the enclosure for the vdev (if any). +.El +.It Fl T Sy u Ns | Ns Sy d Display a time stamp. -.sp -Specify \fBu\fR for a printed representation of the internal representation of time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See \fBdate\fR(1). -.RE - -.sp -.ne 2 -.na -\fB\fB-g\fR\fR -.ad -.RS 12n -Display vdev GUIDs instead of the normal device names. These GUIDs can be used in place of device names for the zpool detach/offline/remove/replace commands. -.RE - -.sp -.ne 2 -.na -\fB\fB-H\fR\fR -.ad -.RS 12n -Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -.RE - -.sp -.ne 2 -.na -\fB\fB-L\fR\fR -.ad -.RS 12n -Display real paths for vdevs resolving all symbolic links. This can be used to look up the current block device name regardless of the /dev/disk/ path used to open it. -.RE - -.sp -.ne 2 -.na -\fB\fB-p\fR\fR -.ad -.RS 12n -Display numbers in parsable (exact) values. Time values are in nanoseconds. -.RE - -.sp -.ne 2 -.na -\fB\fB-P\fR\fR -.ad -.RS 12n -Display full paths for vdevs instead of only the last component of the path. This can be used in conjunction with the \fB-L\fR flag. -.RE - -.sp -.ne 2 -.na -\fB\fB-r\fR\fR -.ad -.RS 12n -Print request size histograms for the leaf ZIOs. This includes histograms of -individual ZIOs ("ind") and aggregate ZIOs ("agg"). These stats can be useful -for seeing how well the ZFS IO aggregator is working. Do not confuse these -request size stats with the block layer requests; it's possible ZIOs can -be broken up before being sent to the block device. -.RE - -.sp -.ne 2 -.na -\fB\fB-v\fR\fR -.ad -.RS 12n -Verbose statistics. Reports usage statistics for individual \fIvdevs\fR within the pool, in addition to the pool-wide statistics. -.RE - -.sp -.ne 2 -.na -\fB\fB-y\fR\fR -.ad -.RS 12n -Omit statistics since boot. Normally the first line of output reports the statistics since boot. This option suppresses that first line of output. -.RE -.sp -.ne 2 -.na -\fB\fB-w\fR\fR -.ad -.RS 12n -Display latency histograms: - -.sp -.ne 2 -.na -total_wait: -.ad -.RS 20n -Total IO time (queuing + disk IO time). -.RE -.ne 2 -.na -disk_wait: -.ad -.RS 20n -Disk IO time (time reading/writing the disk). -.RE -.ne 2 -.na -syncq_wait: -.ad -.RS 20n -Amount of time IO spent in synchronous priority queues. Does not include -disk time. -.RE -.ne 2 -.na -asyncq_wait: -.ad -.RS 20n -Amount of time IO spent in asynchronous priority queues. Does not include -disk time. -.RE -.ne 2 -.na -scrub: -.ad -.RS 20n -Amount of time IO spent in scrub queue. Does not include disk time. - - -.RE - -All histogram buckets are power-of-two sized. The time labels are the end -ranges of the buckets, so for example, a 15ns bucket stores latencies from -8-15ns. The last bucket is also a catch-all for latencies higher than the -maximum. -.RE -.sp -.ne 2 -.na -\fB\fB-l\fR\fR -.ad -.RS 12n +Specify +.Sy u +for a printed representation of the internal representation of time. +See +.Xr time 2 . +Specify +.Sy d +for standard date format. +See +.Xr date 1 . +.It Fl g +Display vdev GUIDs instead of the normal device names. These GUIDs +can be used in place of device names for the zpool +detach/offline/remove/replace commands. +.It Fl H +Scripted mode. Do not display headers, and separate fields by a +single tab instead of arbitrary space. +.It Fl L +Display real paths for vdevs resolving all symbolic links. This can +be used to look up the current block device name regardless of the +.Pa /dev/disk/ +path used to open it. +.It Fl p +Display numbers in parsable (exact) values. Time values are in +nanoseconds. +.It Fl P +Display full paths for vdevs instead of only the last component of +the path. This can be used in conjunction with the +.Fl L +flag. +.It Fl r +Print request size histograms for the leaf ZIOs. This includes +histograms of individual ZIOs ( +.Ar ind ) +and aggregate ZIOs ( +.Ar agg ). +These stats can be useful for seeing how well the ZFS IO aggregator is +working. Do not confuse these request size stats with the block layer +requests; it's possible ZIOs can be broken up before being sent to the +block device. +.It Fl v +Verbose statistics Reports usage statistics for individual vdevs within the +pool, in addition to the pool-wide statistics. +.It Fl y +.It Fl w +.It Fl l Include average latency statistics: - -.sp -.ne 2 -.na -total_wait: -.ad -.RS 20n +.Pp +.Ar total_wait : Average total IO time (queuing + disk IO time). -.RE -.ne 2 -.na -disk_wait: -.ad -.RS 20n +.Ar disk_wait : Average disk IO time (time reading/writing the disk). -.RE -.ne 2 -.na -syncq_wait: -.ad -.RS 20n -Average amount of time IO spent in synchronous priority queues. Does not -include disk time. -.RE -.ne 2 -.na -asyncq_wait: -.ad -.RS 20n -Average amount of time IO spent in asynchronous priority queues. Does not -include disk time. -.RE -.ne 2 -.na -scrub: -.ad -.RS 20n -Average queuing time in scrub queue. Does not include disk time. -.RE - -.RE -.sp -.ne 2 -.na -\fB\fB-q\fR\fR -.ad -.RS 12n -Include active queue statistics. Each priority queue has both pending ("pend") -and active ("activ") IOs. Pending IOs are waiting to be issued to the disk, and -active IOs have been issued to disk and are waiting for completion. These stats -are broken out by priority queue: -.sp -.ne 2 -.na -syncq_read/write: -.ad -.RS 20n -Current number of entries in synchronous priority queues. -.RE -.ne 2 -.na -asyncq_read/write: -.ad -.RS 20n +.Ar syncq_wait : +Average amount of time IO spent in synchronous priority queues. Does +not include disk time. +.Ar asyncq_wait : +Average amount of time IO spent in asynchronous priority queues. +Does not include disk time. +.Ar scrub : +Average queuing time in scrub queue. Does not include disk time. +.It Fl q +Include active queue statistics. Each priority queue has both +pending ( +.Ar pend ) +and active ( +.Ar activ ) +IOs. Pending IOs are waiting to +be issued to the disk, and active IOs have been issued to disk and are +waiting for completion. These stats are broken out by priority queue: +.Pp +.Ar syncq_read/write : +Current number of entries in synchronous priority +queues. +.Ar asyncq_read/write : Current number of entries in asynchronous priority queues. -.RE -.ne 2 -.na -scrubq_read: -.ad -.RS 20n +.Ar scrubq_read : Current number of entries in scrub queue. -.RE - -All queue statistics are instantaneous measurements of the number of entries -in the queues. If you specify an interval, the measurements will be sampled -from the end of the interval. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool labelclear\fR [\fB-f\fR] \fIdevice\fR -.ad -.sp .6 -.RS 4n -Removes ZFS label information from the specified device. The device must not be part of an active pool configuration. -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 12n +.Pp +All queue statistics are instantaneous measurements of the number of +entries in the queues. If you specify an interval, the measurements +will be sampled from the end of the interval. +.El +.It Xo +.Nm +.Cm labelclear +.Op Fl f +.Ar device +.Xc +Removes ZFS label information from the specified +.Ar device . +The +.Ar device +must not be part of an active pool configuration. +.Bl -tag -width Ds +.It Fl f Treat exported or foreign devices as inactive. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool list\fR [\fB-T\fR \fBd\fR | \fBu\fR] [\fB-HgLpPv\fR] [\fB-o\fR \fIprops\fR[,...]] [\fIpool\fR] ... [\fIinterval\fR[\fIcount\fR]]\fR -.ad -.sp .6 -.RS 4n -Lists the given pools along with a health status and space usage. If no \fIpools\fR are specified, all pools in the system are listed. When given an \fIinterval\fR, the information is printed every \fIinterval\fR seconds until \fBCtrl-C\fR is pressed. If \fIcount\fR is specified, the command exits after \fIcount\fR reports are printed. -.sp -.ne 2 -.na -\fB\fB-H\fR\fR -.ad -.RS 12n -Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -.RE - -.sp -.ne 2 -.na -\fB\fB-g\fR\fR -.ad -.RS 12n -Display vdev GUIDs instead of the normal device names. These GUIDs can be used in place of device names for the zpool detach/offline/remove/replace commands. -.RE - -.sp -.ne 2 -.na -\fB\fB-L\fR\fR -.ad -.RS 12n -Display real paths for vdevs resolving all symbolic links. This can be used to look up the current block device name regardless of the /dev/disk/ path used to open it. -.RE - -.sp -.ne 2 -.na -\fB\fB-p\fR\fR -.ad -.RS 12n -Display numbers in parsable (exact) values. -.RE - -.sp -.ne 2 -.na -\fB\fB-P\fR\fR -.ad -.RS 12n -Display full paths for vdevs instead of only the last component of the path. This can be used in conjunction with the \fB-L\fR flag. -.RE - -.sp -.ne 2 -.na -\fB\fB-T\fR \fBd\fR | \fBu\fR\fR -.ad -.RS 12n +.El +.It Xo +.Nm +.Cm list +.Op Fl HgLpPv +.Op Fl o Ar property Ns Oo , Ns Ar property Oc Ns ... +.Op Fl T Sy u Ns | Ns Sy d +.Oo Ar pool Oc Ns ... +.Op Ar interval Op Ar count +.Xc +Lists the given pools along with a health status and space usage. +If no +.Ar pool Ns s +are specified, all pools in the system are listed. +When given an +.Ar interval , +the information is printed every +.Ar interval +seconds until ^C is pressed. +If +.Ar count +is specified, the command exits after +.Ar count +reports are printed. +.Bl -tag -width Ds +.It Fl g +Display vdev GUIDs instead of the normal device names. These GUIDs +can be used in place of device names for the zpool +detach/offline/remove/replace commands. +.It Fl H +Scripted mode. +Do not display headers, and separate fields by a single tab instead of arbitrary +space. +.It Fl o Ar property +Comma-separated list of properties to display. +See the +.Sx Properties +section for a list of valid properties. +The default list is +.Sy name, size, alloc, free, fragmentation, expandsize, capacity, +.Sy dedupratio, health, altroot . +.It Fl L +Display real paths for vdevs resolving all symbolic links. This can +be used to look up the current block device name regardless of the +/dev/disk/ path used to open it. +.It Fl p +Display numbers in parsable +.Pq exact +values. +.It Fl P +Display full paths for vdevs instead of only the last component of +the path. This can be used in conjunction with the +.Fl L flag. +.It Fl T Sy u Ns | Ns Sy d Display a time stamp. -.sp -Specify \fBu\fR for a printed representation of the internal representation of time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See \fBdate\fR(1). -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIprops\fR\fR -.ad -.RS 12n -Comma-separated list of properties to display. See the "Properties" section for a list of valid properties. The default list is "name, size, alloc, free, fragmentation, expandsize, capacity, dedupratio, health, altroot" -.RE - -.sp -.ne 2 -.na -\fB\fB-v\fR\fR -.ad -.RS 12n -Verbose statistics. Reports usage statistics for individual \fIvdevs\fR within the pool, in addition to the pool-wise statistics. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool offline\fR [\fB-f\fR] [\fB-t\fR] \fIpool\fR \fIdevice\fR ...\fR -.ad -.sp .6 -.RS 4n -Takes the specified physical device offline. While the \fIdevice\fR is offline, no attempt is made to read or write to the device. -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 6n -Force fault. Instead of offlining the disk, put it into a faulted state. The -fault will persist across imports unless the \fB-t\fR flag was specified. -.RE - -.sp -.ne 2 -.na -\fB\fB-t\fR\fR -.ad -.RS 6n -Temporary. Upon reboot, the specified physical device reverts to its previous state. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool online\fR [\fB-e\fR] \fIpool\fR \fIdevice\fR...\fR -.ad -.sp .6 -.RS 4n +Specify +.Fl u +for a printed representation of the internal representation of time. +See +.Xr time 2 . +Specify +.Fl d +for standard date format. +See +.Xr date 1 . +.It Fl v +Verbose statistics. +Reports usage statistics for individual vdevs within the pool, in addition to +the pool-wise statistics. +.El +.It Xo +.Nm +.Cm offline +.Op Fl f +.Op Fl t +.Ar pool Ar device Ns ... +.Xc +Takes the specified physical device offline. +While the +.Ar device +is offline, no attempt is made to read or write to the device. +This command is not applicable to spares. +.Bl -tag -width Ds +.It Fl f +Force fault. Instead of offlining the disk, put it into a faulted +state. The fault will persist across imports unless the +.Fl t +flag was specified. +.It Fl t +Temporary. +Upon reboot, the specified physical device reverts to its previous state. +.El +.It Xo +.Nm +.Cm online +.Op Fl e +.Ar pool Ar device Ns ... +.Xc Brings the specified physical device online. -.sp This command is not applicable to spares or cache devices. -.sp -.ne 2 -.na -\fB\fB-e\fR\fR -.ad -.RS 6n -Expand the device to use all available space. If the device is part of a mirror or \fBraidz\fR then all devices must be expanded before the new space will become available to the pool. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool reguid\fR \fIpool\fR -.ad -.sp .6 -.RS 4n -Generates a new unique identifier for the pool. You must ensure that all -devices in this pool are online and healthy before performing this action. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool reopen\fR \fIpool\fR -.ad -.sp .6 -.RS 4n +.Bl -tag -width Ds +.It Fl e +Expand the device to use all available space. +If the device is part of a mirror or raidz then all devices must be expanded +before the new space will become available to the pool. +.El +.It Xo +.Nm +.Cm reguid +.Ar pool +.Xc +Generates a new unique identifier for the pool. +You must ensure that all devices in this pool are online and healthy before +performing this action. +.It Xo +.Nm +.Cm reopen +.Ar pool +.Xc Reopen all the vdevs associated with the pool. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool remove\fR \fIpool\fR \fIdevice\fR ...\fR -.ad -.sp .6 -.RS 4n -Removes the specified device from the pool. This command currently only supports removing hot spares, cache, and log devices. A mirrored log device can be removed by specifying the top-level mirror for the log. Non-log devices that are part of a mirrored configuration can be removed using the \fBzpool detach\fR command. Non-redundant and \fBraidz\fR devices cannot be removed from a pool. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool replace\fR [\fB-f\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fIold_device\fR [\fInew_device\fR]\fR -.ad -.sp .6 -.RS 4n -Replaces \fIold_device\fR with \fInew_device\fR. This is equivalent to attaching \fInew_device\fR, waiting for it to resilver, and then detaching \fIold_device\fR. -.sp -The size of \fInew_device\fR must be greater than or equal to the minimum size of all the devices in a mirror or \fBraidz\fR configuration. -.sp -\fInew_device\fR is required if the pool is not redundant. If \fInew_device\fR is not specified, it defaults to \fIold_device\fR. This form of replacement is useful after an existing disk has failed and has been physically replaced. In this case, the new disk may have the same \fB/dev\fR path as the old device, even though it is actually a different disk. \fBZFS\fR recognizes this. -.sp -.ne 2 -.na -\fB\fB-f\fR\fR -.ad -.RS 6n -Forces use of \fInew_device\fR, even if its appears to be in use. Not all devices can be overridden in this manner. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIproperty=value\fR -.ad -.sp .6n -.RS 6n -Sets the given pool properties. See the "Properties" section for a list of valid properties that can be set. The only property supported at the moment is \fBashift\fR. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool scrub\fR [\fB-s\fR] \fIpool\fR ...\fR -.ad -.sp .6 -.RS 4n -Begins a scrub. The scrub examines all data in the specified pools to verify that it checksums correctly. For replicated (mirror or \fBraidz\fR) devices, \fBZFS\fR automatically repairs any damage discovered during the scrub. The "\fBzpool status\fR" command reports the progress of the scrub and summarizes the results of the scrub upon completion. -.sp -Scrubbing and resilvering are very similar operations. The difference is that resilvering only examines data that \fBZFS\fR knows to be out of date (for example, when attaching a new device to a mirror or replacing an existing device), whereas scrubbing examines all data to discover silent errors due to hardware faults or disk failure. -.sp -Because scrubbing and resilvering are \fBI/O\fR-intensive operations, \fBZFS\fR only allows one at a time. If a scrub is already in progress, the "\fBzpool scrub\fR" command terminates it and starts a new scrub. If a resilver is in progress, \fBZFS\fR does not allow a scrub to be started until the resilver completes. -.sp -.ne 2 -.na -\fB\fB-s\fR\fR -.ad -.RS 6n +.It Xo +.Nm +.Cm remove +.Ar pool Ar device Ns ... +.Xc +Removes the specified device from the pool. +This command currently only supports removing hot spares, cache, and log +devices. +A mirrored log device can be removed by specifying the top-level mirror for the +log. +Non-log devices that are part of a mirrored configuration can be removed using +the +.Nm zpool Cm detach +command. +Non-redundant and raidz devices cannot be removed from a pool. +.It Xo +.Nm +.Cm replace +.Op Fl f +.Op Fl o Ar property Ns = Ns Ar value +.Ar pool Ar device Op Ar new_device +.Xc +Replaces +.Ar old_device +with +.Ar new_device . +This is equivalent to attaching +.Ar new_device , +waiting for it to resilver, and then detaching +.Ar old_device . +.Pp +The size of +.Ar new_device +must be greater than or equal to the minimum size of all the devices in a mirror +or raidz configuration. +.Pp +.Ar new_device +is required if the pool is not redundant. +If +.Ar new_device +is not specified, it defaults to +.Ar old_device . +This form of replacement is useful after an existing disk has failed and has +been physically replaced. +In this case, the new disk may have the same +.Pa /dev +path as the old device, even though it is actually a different disk. +ZFS recognizes this. +.Bl -tag -width Ds +.It Fl f +Forces use of +.Ar new_device , +even if its appears to be in use. +Not all devices can be overridden in this manner. +.It Fl o Ar property Ns = Ns Ar value +Sets the given pool properties. See the +.Sx Properties +section for a list of valid properties that can be set. +The only property supported at the moment is +.Sy ashift . +.El +.It Xo +.Nm +.Cm scrub +.Op Fl s +.Ar pool Ns ... +.Xc +Begins a scrub. +The scrub examines all data in the specified pools to verify that it checksums +correctly. +For replicated +.Pq mirror or raidz +devices, ZFS automatically repairs any damage discovered during the scrub. +The +.Nm zpool Cm status +command reports the progress of the scrub and summarizes the results of the +scrub upon completion. +.Pp +Scrubbing and resilvering are very similar operations. +The difference is that resilvering only examines data that ZFS knows to be out +of date +.Po +for example, when attaching a new device to a mirror or replacing an existing +device +.Pc , +whereas scrubbing examines all data to discover silent errors due to hardware +faults or disk failure. +.Pp +Because scrubbing and resilvering are I/O-intensive operations, ZFS only allows +one at a time. +If a scrub is already in progress, the +.Nm zpool Cm scrub +command terminates it and starts a new scrub. +If a resilver is in progress, ZFS does not allow a scrub to be started until the +resilver completes. +.Bl -tag -width Ds +.It Fl s Stop scrubbing. -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool set\fR \fIproperty\fR=\fIvalue\fR \fIpool\fR\fR -.ad -.sp .6 -.RS 4n -Sets the given property on the specified pool. See the "Properties" section for more information on what properties can be set and acceptable values. -.RE - -.sp -.ne 2 -.na -\fBzpool split\fR [\fB-gLnP\fR] [\fB-R\fR \fIaltroot\fR] [\fB-o\fR \fIproperty=value\fR] \fIpool\fR \fInewpool\fR [\fIdevice\fR ...] -.ad -.sp .6 -.RS 4n -Split devices off \fIpool\fR creating \fInewpool\fR. All \fBvdev\fRs in \fIpool\fR must be mirrors and the pool must not be in the process of resilvering. At the time of the split, \fInewpool\fR will be a replica of \fIpool\fR. By default, the last device in each mirror is split from \fIpool\fR to create \fInewpool\fR. - -The optional \fIdevice\fR specification causes the specified device(s) to be included in the new pool and, should any devices remain unspecified, the last device in each mirror is used as would be by default. - -.sp -.ne 2 -.na -\fB\fB-g\fR\fR -.ad -.RS 6n -Display vdev GUIDs instead of the normal device names. These GUIDs can be used in place of device names for the zpool detach/offline/remove/replace commands. -.RE - -.sp -.ne 2 -.na -\fB\fB-L\fR\fR -.ad -.RS 6n -Display real paths for vdevs resolving all symbolic links. This can be used to look up the current block device name regardless of the /dev/disk/ path used to open it. -.RE - -.sp -.ne 2 -.na -\fB\fB-n\fR \fR -.ad -.sp .6 -.RS 4n -Do dry run, do not actually perform the split. Print out the expected configuration of \fInewpool\fR. -.RE - -.sp -.ne 2 -.na -\fB\fB-P\fR\fR -.ad -.RS 6n -Display full paths for vdevs instead of only the last component of the path. This can be used in conjunction with the \fB-L\fR flag. -.RE - -.sp -.ne 2 -.na -\fB\fB-R\fR \fIaltroot\fR \fR -.ad -.sp .6 -.RS 4n -Set \fIaltroot\fR for \fInewpool\fR and automatically import it. This can be useful to avoid mountpoint collisions if \fInewpool\fR is imported on the same filesystem as \fIpool\fR. -.RE - -.sp -.ne 2 -.na -\fB\fB-o\fR \fIproperty=value\fR \fR -.ad -.sp .6 -.RS 4n -Sets the specified property for \fInewpool\fR. See the “Properties” section for more information on the available pool properties. -.RE - -.RE - -.sp -.ne 2 -.na -\fBzpool status\fR [\fB-c\fR \fB[SCRIPT1,SCRIPT2,...] \fR] [\fB-gLPvxD\fR] [\fB-T\fR d | u] [\fIpool\fR] ... [\fIinterval\fR [\fIcount\fR]] -.ad -.sp .6 -.RS 4n -Displays the detailed health status for the given pools. If no \fIpool\fR is specified, then the status of each pool in the system is displayed. For more information on pool and device health, see the "Device Failure and Recovery" section. -.sp -If a scrub or resilver is in progress, this command reports the percentage done and the estimated time to completion. Both of these are only approximate, because the amount of data in the pool and the other workloads on the system can change. - -.sp -.ne 2 -.na -\fB\fB-c\fR \fB[SCRIPT1,SCRIPT2,...]\fR -.ad -.RS 12n -Run a script (or scripts) on each vdev and include the output in zpool status -.sp -The \fB-c\fR option allows you to run script(s) for each vdev and display the -output in zpool status. For security reasons, a user can only execute scripts -as an unprivileged user. By default, a user may run a script from ~/.zpool.d -or /etc/zfs/zpool.d. The default search path can be overriden by setting -the \fBZPOOL_SCRIPTS_PATH\fR environment variable. A privileged user can run -\fB-c\fR if they have the \fBZPOOL_SCRIPTS_AS_ROOT\fR environment variable set. -If a script requires the use of a privileged command (like \fBsmartctl(8)\fR) -then it's recommended you allow the user access to it in /etc/sudoers or add -the user to the /etc/sudoers.d/zfs file. - -If \fB-c\fR is passed without a script name, it prints a list of all scripts. - -Script output should be in the form of "name=value". The column name is -set to "name" and the value is set to "value". Multiple lines can be used to -output multiple columns. The first line of output not in the "name=value" -format is displayed without a column title, and no more output after that is -displayed. This can be useful for printing error messages. Blank or NULL -values are printed as a '-' to make output awk-able. - -The following environment variables are set before running each command: -.sp -\fB$VDEV_PATH\fR: Full path to the vdev. -.LP -\fB$VDEV_UPATH\fR: "Underlying path" to the vdev. For device mapper, multipath, or -partitioned vdevs, \fBVDEV_UPATH\fR is the actual underlying /dev/sd* disk. -This can be useful if the command you're running requires a /dev/sd* device. -.LP -\fB$VDEV_ENC_SYSFS_PATH\fR: The sysfs path to the vdev's enclosure LEDs (if any). -.RE - -.sp -.ne 2 -.na -\fB\fB-g\fR\fR -.ad -.RS 12n -Display vdev GUIDs instead of the normal device names. These GUIDs can be used innplace of device names for the zpool detach/offline/remove/replace commands. -.RE - -.sp -.ne 2 -.na -\fB\fB-L\fR\fR -.ad -.RS 12n -Display real paths for vdevs resolving all symbolic links. This can be used to look up the current block device name regardless of the /dev/disk/ path used to open it. -.RE - -.sp -.ne 2 -.na -\fB\fB-P\fR\fR -.ad -.RS 12n -Display full paths for vdevs instead of only the last component of the path. This can be used in conjunction with the \fB-L\fR flag. -.RE - -.sp -.ne 2 -.na -\fB\fB-v\fR\fR -.ad -.RS 12n -Displays verbose data error information, printing out a complete list of all data errors since the last complete pool scrub. -.RE - -.sp -.ne 2 -.na -\fB\fB-x\fR\fR -.ad -.RS 12n -Only display status for pools that are exhibiting errors or are otherwise unavailable. Warnings about pools not using the latest on-disk format will not be included. -.RE - -.sp -.ne 2 -.na -\fB\fB-D\fR\fR -.ad -.RS 12n -Display a histogram of deduplication statistics, showing the allocated (physically present on disk) and -referenced (logically referenced in the pool) block counts and sizes by reference count. -.RE - -.sp -.ne 2 -.na -\fB\fB-T\fR \fBd\fR | \fBu\fR\fR -.ad -.RS 12n +.El +.It Xo +.Nm +.Cm set +.Ar property Ns = Ns Ar value +.Ar pool +.Xc +Sets the given property on the specified pool. +See the +.Sx Properties +section for more information on what properties can be set and acceptable +values. +.It Xo +.Nm +.Cm split +.Op Fl gLnP +.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... +.Op Fl R Ar root +.Ar pool newpool +.Op Ar device ... +.Xc +Splits devices off +.Ar pool +creating +.Ar newpool . +All vdevs in +.Ar pool +must be mirrors and the pool must not be in the process of resilvering. +At the time of the split, +.Ar newpool +will be a replica of +.Ar pool . +By default, the +last device in each mirror is split from +.Ar pool +to create +.Ar newpool . +.Pp +The optional device specification causes the specified device(s) to be +included in the new +.Ar pool +and, should any devices remain unspecified, +the last device in each mirror is used as would be by default. +.Bl -tag -width Ds +.It Fl g +Display vdev GUIDs instead of the normal device names. These GUIDs +can be used in place of device names for the zpool +detach/offline/remove/replace commands. +.It Fl L +Display real paths for vdevs resolving all symbolic links. This can +be used to look up the current block device name regardless of the +.Pa /dev/disk/ +path used to open it. +.It Fl n +Do dry run, do not actually perform the split. +Print out the expected configuration of +.Ar newpool . +.It Fl P +Display full paths for vdevs instead of only the last component of +the path. This can be used in conjunction with the +.Fl L flag. +.It Fl o Ar property Ns = Ns Ar value +Sets the specified property for +.Ar newpool . +See the +.Sx Properties +section for more information on the available pool properties. +.It Fl R Ar root +Set +.Sy altroot +for +.Ar newpool +to +.Ar root +and automatically import it. +.El +.It Xo +.Nm +.Cm status +.Op Fl c Op Ar SCRIPT1 , Ar SCRIPT2 ... +.Op Fl gLPvxD +.Op Fl T Sy u Ns | Ns Sy d +.Oo Ar pool Oc Ns ... +.Op Ar interval Op Ar count +.Xc +Displays the detailed health status for the given pools. +If no +.Ar pool +is specified, then the status of each pool in the system is displayed. +For more information on pool and device health, see the +.Sx Device Failure and Recovery +section. +.Pp +If a scrub or resilver is in progress, this command reports the percentage done +and the estimated time to completion. +Both of these are only approximate, because the amount of data in the pool and +the other workloads on the system can change. +.Bl -tag -width Ds +.It Fl c Op Ar SCRIPT1 , Ar SCRIPT2 ... +Run a script (or scripts) on each vdev and include the output as a new column +in the +.Nm zpool Cm status +output. See the +.Fl c +option of +.Nm zpool Cm iostat +for complete details. +.It Fl g +Display vdev GUIDs instead of the normal device names. These GUIDs +can be used in place of device names for the zpool +detach/offline/remove/replace commands. +.It Fl L +Display real paths for vdevs resolving all symbolic links. This can +be used to look up the current block device name regardless of the +.Pa /dev/disk/ +path used to open it. +.It Fl p +Display numbers in parsable (exact) values. Time values are in +nanoseconds. +.It Fl D +Display a histogram of deduplication statistics, showing the allocated +.Pq physically present on disk +and referenced +.Pq logically referenced in the pool +block counts and sizes by reference count. +.It Fl T Sy u Ns | Ns Sy d Display a time stamp. -.sp -Specify \fBu\fR for a printed representation of the internal representation of time. See \fBtime\fR(2). Specify \fBd\fR for standard date format. See \fBdate\fR(1). -.RE - -.RE - -.sp -.ne 2 -.na -\fB\fBzpool sync\fR\fR [\fBpool\fR] ... -.ad -.sp .6 -.RS 4n -This command forces all in-core dirty data to be written to the primary pool -storage and not the ZIL. It will also update administrative information -including quota reporting. -Without arguments, \fBzpool sync\fR will sync all pools on the system. -Otherwise, it will sync only the specified pool(s). -.RE - -.sp -.ne 2 -.na -\fB\fBzpool upgrade\fR\fR -.ad -.sp .6 -.RS 4n -Displays pools which do not have all supported features enabled and pools formatted using a legacy ZFS version number. These pools can continue to be used, but some features may not be available. Use "\fBzpool upgrade -a\fR" to enable all features on all pools. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool upgrade\fR \fB-v\fR\fR -.ad -.sp .6 -.RS 4n -Displays legacy \fBZFS\fR versions supported by the current software. See \fBzfs-features\fR(5) for a description of feature flags features supported by the current software. -.RE - -.sp -.ne 2 -.na -\fB\fBzpool upgrade\fR [\fB-V\fR \fIversion\fR] \fB-a\fR | \fIpool\fR ...\fR -.ad -.sp .6 -.RS 4n -Enables all supported features on the given pool. Once this is done, the pool will no longer be accessible on systems that do not support feature flags. See \fBzfs-features\fR(5) for details on compatibility with systems that support feature flags, but do not support all features enabled on the pool. -.sp -.ne 2 -.na -\fB\fB-a\fR\fR -.ad -.RS 14n +Specify +.Fl u +for a printed representation of the internal representation of time. +See +.Xr time 2 . +Specify +.Fl d +for standard date format. +See +.Xr date 1 . +.It Fl v +Displays verbose data error information, printing out a complete list of all +data errors since the last complete pool scrub. +.It Fl x +Only display status for pools that are exhibiting errors or are otherwise +unavailable. +Warnings about pools not using the latest on-disk format will not be included. +.El +.It Xo +.Nm +.Cm sync +.Op Ar pool ... +.Xc +This command forces all in-core dirty data to be written to the primary +pool storage and not the ZIL. It will also update administrative +information including quota reporting. Without arguments, +.Sy zpool sync +will sync all pools on the system. Otherwise, it will sync only the +specified pool(s). +.It Xo +.Nm +.Cm upgrade +.Xc +Displays pools which do not have all supported features enabled and pools +formatted using a legacy ZFS version number. +These pools can continue to be used, but some features may not be available. +Use +.Nm zpool Cm upgrade Fl a +to enable all features on all pools. +.It Xo +.Nm +.Cm upgrade +.Fl v +.Xc +Displays legacy ZFS versions supported by the current software. +See +.Xr zpool-features 5 +for a description of feature flags features supported by the current software. +.It Xo +.Nm +.Cm upgrade +.Op Fl V Ar version +.Fl a Ns | Ns Ar pool Ns ... +.Xc +Enables all supported features on the given pool. +Once this is done, the pool will no longer be accessible on systems that do not +support feature flags. +See +.Xr zfs-features 5 +for details on compatibility with systems that support feature flags, but do not +support all features enabled on the pool. +.Bl -tag -width Ds +.It Fl a Enables all supported features on all pools. -.RE - -.sp -.ne 2 -.na -\fB\fB-V\fR \fIversion\fR\fR -.ad -.RS 14n -Upgrade to the specified legacy version. If the \fB-V\fR flag is specified, no features will be enabled on the pool. This option can only be used to increase the version number up to the last supported legacy version number. -.RE - -.RE - -.SH EXAMPLES -.LP -\fBExample 1 \fRCreating a RAID-Z Storage Pool -.sp -.LP -The following command creates a pool with a single \fBraidz\fR root \fIvdev\fR that consists of six disks. - -.sp -.in +2 -.nf -# \fBzpool create tank raidz sda sdb sdc sdd sde sdf\fR -.fi -.in -2 -.sp - -.LP -\fBExample 2 \fRCreating a Mirrored Storage Pool -.sp -.LP -The following command creates a pool with two mirrors, where each mirror contains two disks. - -.sp -.in +2 -.nf -# \fBzpool create tank mirror sda sdb mirror sdc sdd\fR -.fi -.in -2 -.sp - -.LP -\fBExample 3 \fRCreating a ZFS Storage Pool by Using Partitions -.sp -.LP +.It Fl V Ar version +Upgrade to the specified legacy version. +If the +.Fl V +flag is specified, no features will be enabled on the pool. +This option can only be used to increase the version number up to the last +supported legacy version number. +.El +.El +.Sh EXIT STATUS +The following exit values are returned: +.Bl -tag -width Ds +.It Sy 0 +Successful completion. +.It Sy 1 +An error occurred. +.It Sy 2 +Invalid command line options were specified. +.El +.Sh EXAMPLES +.Bl -tag -width Ds +.It Sy Example 1 No Creating a RAID-Z Storage Pool +The following command creates a pool with a single raidz root vdev that +consists of six disks. +.Bd -literal +# zpool create tank raidz sda sdb sdc sdd sde sdf +.Ed +.It Sy Example 2 No Creating a Mirrored Storage Pool +The following command creates a pool with two mirrors, where each mirror +contains two disks. +.Bd -literal +# zpool create tank mirror sda sdb mirror sdc sdd +.Ed +.It Sy Example 3 No Creating a ZFS Storage Pool by Using Partitions The following command creates an unmirrored pool using two disk partitions. - -.sp -.in +2 -.nf -# \fBzpool create tank sda1 sdb2\fR -.fi -.in -2 -.sp - -.LP -\fBExample 4 \fRCreating a ZFS Storage Pool by Using Files -.sp -.LP -The following command creates an unmirrored pool using files. While not recommended, a pool based on files can be useful for experimental purposes. - -.sp -.in +2 -.nf -# \fBzpool create tank /path/to/file/a /path/to/file/b\fR -.fi -.in -2 -.sp - -.LP -\fBExample 5 \fRAdding a Mirror to a ZFS Storage Pool -.sp -.LP -The following command adds two mirrored disks to the pool \fItank\fR, assuming the pool is already made up of two-way mirrors. The additional space is immediately available to any datasets within the pool. - -.sp -.in +2 -.nf -# \fBzpool add tank mirror sda sdb\fR -.fi -.in -2 -.sp - -.LP -\fBExample 6 \fRListing Available ZFS Storage Pools -.sp -.LP -The following command lists all available pools on the system. In this case, the pool \fIzion\fR is faulted due to a missing device. - -.sp -.LP +.Bd -literal +# zpool create tank sda1 sdb2 +.Ed +.It Sy Example 4 No Creating a ZFS Storage Pool by Using Files +The following command creates an unmirrored pool using files. +While not recommended, a pool based on files can be useful for experimental +purposes. +.Bd -literal +# zpool create tank /path/to/file/a /path/to/file/b +.Ed +.It Sy Example 5 No Adding a Mirror to a ZFS Storage Pool +The following command adds two mirrored disks to the pool +.Em tank , +assuming the pool is already made up of two-way mirrors. +The additional space is immediately available to any datasets within the pool. +.Bd -literal +# zpool add tank mirror sda sdb +.Ed +.It Sy Example 6 No Listing Available ZFS Storage Pools +The following command lists all available pools on the system. +In this case, the pool +.Em zion +is faulted due to a missing device. The results from this command are similar to the following: - -.sp -.in +2 -.nf -# \fBzpool list\fR +.Bd -literal +# zpool list NAME SIZE ALLOC FREE FRAG EXPANDSZ CAP DEDUP HEALTH ALTROOT rpool 19.9G 8.43G 11.4G 33% - 42% 1.00x ONLINE - tank 61.5G 20.0G 41.5G 48% - 32% 1.00x ONLINE - zion - - - - - - - FAULTED - -.fi -.in -2 -.sp - -.LP -\fBExample 7 \fRDestroying a ZFS Storage Pool -.sp -.LP -The following command destroys the pool \fItank\fR and any datasets contained within. - -.sp -.in +2 -.nf -# \fBzpool destroy -f tank\fR -.fi -.in -2 -.sp - -.LP -\fBExample 8 \fRExporting a ZFS Storage Pool -.sp -.LP -The following command exports the devices in pool \fItank\fR so that they can be relocated or later imported. - -.sp -.in +2 -.nf -# \fBzpool export tank\fR -.fi -.in -2 -.sp - -.LP -\fBExample 9 \fRImporting a ZFS Storage Pool -.sp -.LP -The following command displays available pools, and then imports the pool \fItank\fR for use on the system. - -.sp -.LP +.Ed +.It Sy Example 7 No Destroying a ZFS Storage Pool +The following command destroys the pool +.Em tank +and any datasets contained within. +.Bd -literal +# zpool destroy -f tank +.Ed +.It Sy Example 8 No Exporting a ZFS Storage Pool +The following command exports the devices in pool +.Em tank +so that they can be relocated or later imported. +.Bd -literal +# zpool export tank +.Ed +.It Sy Example 9 No Importing a ZFS Storage Pool +The following command displays available pools, and then imports the pool +.Em tank +for use on the system. The results from this command are similar to the following: - -.sp -.in +2 -.nf -# \fBzpool import\fR +.Bd -literal +# zpool import pool: tank id: 15451357997522795478 state: ONLINE @@ -2452,121 +2092,66 @@ config: sda ONLINE sdb ONLINE -# \fBzpool import tank\fR -.fi -.in -2 -.sp - -.LP -\fBExample 10 \fRUpgrading All ZFS Storage Pools to the Current Version -.sp -.LP -The following command upgrades all ZFS Storage pools to the current version of the software. - -.sp -.in +2 -.nf -# \fBzpool upgrade -a\fR -This system is currently running ZFS pool version 28. -.fi -.in -2 -.sp - -.LP -\fBExample 11 \fRManaging Hot Spares -.sp -.LP +# zpool import tank +.Ed +.It Sy Example 10 No Upgrading All ZFS Storage Pools to the Current Version +The following command upgrades all ZFS Storage pools to the current version of +the software. +.Bd -literal +# zpool upgrade -a +This system is currently running ZFS version 2. +.Ed +.It Sy Example 11 No Managing Hot Spares The following command creates a new pool with an available hot spare: - -.sp -.in +2 -.nf -# \fBzpool create tank mirror sda sdb spare sdc\fR -.fi -.in -2 -.sp - -.sp -.LP -If one of the disks were to fail, the pool would be reduced to the degraded state. The failed device can be replaced using the following command: - -.sp -.in +2 -.nf -# \fBzpool replace tank sda sdd\fR -.fi -.in -2 -.sp - -.sp -.LP -Once the data has been resilvered, the spare is automatically removed and is made available for use should another device fails. The hot spare can be permanently removed from the pool using the following command: - -.sp -.in +2 -.nf -# \fBzpool remove tank sdc\fR -.fi -.in -2 -.sp - -.LP -\fBExample 12 \fRCreating a ZFS Pool with Mirrored Separate Intent Logs -.sp -.LP -The following command creates a ZFS storage pool consisting of two, two-way mirrors and mirrored log devices: - -.sp -.in +2 -.nf -# \fBzpool create pool mirror sda sdb mirror sdc sdd log mirror \e - sde sdf\fR -.fi -.in -2 -.sp - -.LP -\fBExample 13 \fRAdding Cache Devices to a ZFS Pool -.sp -.LP -The following command adds two disks for use as cache devices to a ZFS storage pool: - -.sp -.in +2 -.nf -# \fBzpool add pool cache sdc sdd\fR -.fi -.in -2 -.sp - -.sp -.LP -Once added, the cache devices gradually fill with content from main memory. Depending on the size of your cache devices, it could take over an hour for them to fill. Capacity and reads can be monitored using the \fBiostat\fR option as follows: - -.sp -.in +2 -.nf -# \fBzpool iostat -v pool 5\fR -.fi -.in -2 -.sp - -.LP -\fBExample 14 \fRRemoving a Mirrored Log Device -.sp -.LP -The following command removes the mirrored log device \fBmirror-2\fR. - -.sp -.LP +.Bd -literal +# zpool create tank mirror sda sdb spare sdc +.Ed +.Pp +If one of the disks were to fail, the pool would be reduced to the degraded +state. +The failed device can be replaced using the following command: +.Bd -literal +# zpool replace tank sda sdd +.Ed +.Pp +Once the data has been resilvered, the spare is automatically removed and is +made available for use should another device fails. +The hot spare can be permanently removed from the pool using the following +command: +.Bd -literal +# zpool remove tank sdc +.Ed +.It Sy Example 12 No Creating a ZFS Pool with Mirrored Separate Intent Logs +The following command creates a ZFS storage pool consisting of two, two-way +mirrors and mirrored log devices: +.Bd -literal +# zpool create pool mirror sda sdb mirror sdc sdd log mirror \\ + sde sdf +.Ed +.It Sy Example 13 No Adding Cache Devices to a ZFS Pool +The following command adds two disks for use as cache devices to a ZFS storage +pool: +.Bd -literal +# zpool add pool cache sdc sdd +.Ed +.Pp +Once added, the cache devices gradually fill with content from main memory. +Depending on the size of your cache devices, it could take over an hour for +them to fill. +Capacity and reads can be monitored using the +.Cm iostat +option as follows: +.Bd -literal +# zpool iostat -v pool 5 +.Ed +.It Sy Example 14 No Removing a Mirrored Log Device +The following command removes the mirrored log device +.Sy mirror-2 . Given this configuration: - -.sp -.in +2 -.nf - pool: tank - state: ONLINE - scrub: none requested +.Bd -literal + pool: tank + state: ONLINE + scrub: none requested config: NAME STATE READ WRITE CKSUM @@ -2581,162 +2166,166 @@ config: mirror-2 ONLINE 0 0 0 sde ONLINE 0 0 0 sdf ONLINE 0 0 0 -.fi -.in -2 -.sp - -.sp -.LP -The command to remove the mirrored log \fBmirror-2\fR is: - -.sp -.in +2 -.nf -# \fBzpool remove tank mirror-2\fR -.fi -.in -2 -.sp - -.LP -\fBExample 15 \fRDisplaying expanded space on a device -.sp -.LP -The following command displays the detailed information for the \fIdata\fR -pool. This pool is comprised of a single \fIraidz\fR vdev where one of its -devices increased its capacity by 10GB. In this example, the pool will not -be able to utilized this extra capacity until all the devices under the -\fIraidz\fR vdev have been expanded. - -.sp -.in +2 -.nf -# \fBzpool list -v data\fR +.Ed +.Pp +The command to remove the mirrored log +.Sy mirror-2 +is: +.Bd -literal +# zpool remove tank mirror-2 +.Ed +.It Sy Example 15 No Displaying expanded space on a device +The following command displays the detailed information for the pool +.Em data . +This pool is comprised of a single raidz vdev where one of its devices +increased its capacity by 10GB. +In this example, the pool will not be able to utilize this extra capacity until +all the devices under the raidz vdev have been expanded. +.Bd -literal +# zpool list -v data NAME SIZE ALLOC FREE FRAG EXPANDSZ CAP DEDUP HEALTH ALTROOT data 23.9G 14.6G 9.30G 48% - 61% 1.00x ONLINE - raidz1 23.9G 14.6G 9.30G 48% - - c1t1d0 - - - - - - c1t2d0 - - - - 10G - c1t3d0 - - - - - -.fi -.in -2 -.sp - -.LP -\fBExample 16 \fRRunning commands in zpool status and zpool iostat with -c -.sp -.LP -.sp -.in +2 -.nf -# zpool status -c vendor,model,size,enc -... -NAME STATE READ WRITE CKSUM vendor model size enc -tank ONLINE 0 0 0 - mirror-0 ONLINE 0 0 0 - U1 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T 0:0:0:0 - U10 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T 0:0:0:0 - U11 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T 0:0:0:0 - U12 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T 0:0:0:0 - U13 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T 0:0:0:0 - U14 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T 0:0:0:0 -.fi -.in -2 - -.sp -.in +2 -.nf -# zpool iostat -vc slaves,locate_led - capacity operations bandwidth -pool alloc free read write read write slaves locate_led ----------- ----- ----- ----- ----- ----- ----- --------- ---------- -tank 20.4G 7.23T 26 152 20.7M 21.6M - mirror 20.4G 7.23T 26 152 20.7M 21.6M - U1 - - 0 31 1.46K 20.6M sdb sdff 0 - U10 - - 0 1 3.77K 13.3K sdas sdgw 0 - U11 - - 0 1 288K 13.3K sdat sdgx 1 - U12 - - 0 1 78.4K 13.3K sdau sdgy 0 - U13 - - 0 1 128K 13.3K sdav sdgz 0 - U14 - - 0 1 63.2K 13.3K sdfk sdg 0 -.fi -.in -2 - -.SH EXIT STATUS -.sp -.LP -The following exit values are returned: -.sp -.ne 2 -.na -\fB\fB0\fR\fR -.ad -.RS 5n -Successful completion. -.RE - -.sp -.ne 2 -.na -\fB\fB1\fR\fR -.ad -.RS 5n -An error occurred. -.RE - -.sp -.ne 2 -.na -\fB\fB2\fR\fR -.ad -.RS 5n -Invalid command line options were specified. -.RE - -.SH "ENVIRONMENT VARIABLES" -.TP -.B "ZFS_ABORT -Cause \fBzpool\fR to dump core on exit for the purposes of running \fB::findleaks\fR. -.TP -.B "ZPOOL_IMPORT_PATH" -The search path for devices or files to use with the pool. This is a colon-separated list of directories in which \fBzpool\fR looks for device nodes and files. -Similar to the \fB-d\fR option in \fIzpool import\fR. -.TP -.B "ZPOOL_VDEV_NAME_GUID" -Cause \fBzpool\fR subcommands to output vdev guids by default. This behavior -is identical to the \fBzpool status -g\fR command line option. -.TP -.B "ZPOOL_VDEV_NAME_FOLLOW_LINKS" -Cause \fBzpool\fR subcommands to follow links for vdev names by default. This behavior is identical to the \fBzpool status -L\fR command line option. -.TP -.B "ZPOOL_VDEV_NAME_PATH" -Cause \fBzpool\fR subcommands to output full vdev path names by default. This -behavior is identical to the \fBzpool status -p\fR command line option. -.TP -.B "ZFS_VDEV_DEVID_OPT_OUT" + sda - - - - - + sdb - - - - 10G + sdc - - - - - +.Ed +.It Sy Example 16 No Adding output columns +Additional columns can be added to the +.Nm zpool Cm status +and +.Nm zpool Cm iostat +output with +.Fl c +option. +.Bd -literal +# zpool status -c vendor,model,size + NAME STATE READ WRITE CKSUM vendor model size + tank ONLINE 0 0 0 + mirror-0 ONLINE 0 0 0 + U1 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T + U10 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T + U11 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T + U12 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T + U13 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T + U14 ONLINE 0 0 0 SEAGATE ST8000NM0075 7.3T + +# zpool iostat -vc slaves + capacity operations bandwidth + pool alloc free read write read write slaves + ---------- ----- ----- ----- ----- ----- ----- --------- + tank 20.4G 7.23T 26 152 20.7M 21.6M + mirror 20.4G 7.23T 26 152 20.7M 21.6M + U1 - - 0 31 1.46K 20.6M sdb sdff + U10 - - 0 1 3.77K 13.3K sdas sdgw + U11 - - 0 1 288K 13.3K sdat sdgx + U12 - - 0 1 78.4K 13.3K sdau sdgy + U13 - - 0 1 128K 13.3K sdav sdgz + U14 - - 0 1 63.2K 13.3K sdfk sdg +.Ed +.El +.Sh ENVIRONMENT VARIABLES +.Bl -tag -width "ZFS_ABORT" +.It Ev ZFS_ABORT +Cause +.Nm zpool +to dump core on exit for the purposes of running +.Sy::findleaks . +.El +.Bl -tag -width "ZPOOL_IMPORT_PATH" +.It Ev ZPOOL_IMPORT_PATH +The search path for devices or files to use with the pool. This is a colon-separated list of directories in which +.Nm zpool +looks for device nodes and files. +Similar to the +.Fl d +option in +.Nm zpool import . +.El +.Bl -tag -width "ZPOOL_VDEV_NAME_GUID" +.It Ev ZPOOL_VDEV_NAME_GUID +Cause +.Nm zpool subcommands to output vdev guids by default. This behavior +is identical to the +.Nm zpool status -g +command line option. +.El +.Bl -tag -width "ZPOOL_VDEV_NAME_FOLLOW_LINKS" +.It Ev ZPOOL_VDEV_NAME_FOLLOW_LINKS +Cause +.Nm zpool +subcommands to follow links for vdev names by default. This behavior is identical to the +.Nm zpool status -L +command line option. +.El +.Bl -tag -width "ZPOOL_VDEV_NAME_PATH" +.It Ev ZPOOL_VDEV_NAME_PATH +Cause +.Nm zpool +subcommands to output full vdev path names by default. This +behavior is identical to the +.Nm zpool status -p +command line option. +.El +.Bl -tag -width "ZFS_VDEV_DEVID_OPT_OUT" +.It Ev ZFS_VDEV_DEVID_OPT_OUT Older ZFS on Linux implementations had issues when attempting to display pool -config VDEV names if a "devid" NVP value is present in the pool's config. - +config VDEV names if a +.Sy devid +NVP value is present in the pool's config. +.Pp For example, a pool that originated on illumos platform would have a devid -value in the config and \fBzpool status\fR would fail when listing the config. +value in the config and +.Nm zpool status +would fail when listing the config. This would also be true for future Linux based pools. - -A pool can be stripped of any "devid" values on import or prevented from adding -them on \fBzpool create\fR or \fBzpool add\fR by setting ZFS_VDEV_DEVID_OPT_OUT. -.TP -.B "ZPOOL_SCRIPTS_AS_ROOT" -Allow a privilaged user to run the \fBzpool status/iostat\fR with the \fB-c\fR -option. Normally, only unprivilaged users are allowed to run \fB-c\fR. -.TP -.B "ZPOOL_SCRIPTS_PATH" -The search path for scripts when running \fBzpool status/iostat\fR with the \fB-c\fR +.Pp +A pool can be stripped of any +.Sy devid +values on import or prevented from adding +them on +.Nm zpool create +or +.Nm zpool add +by setting +.Sy ZFS_VDEV_DEVID_OPT_OUT . +.El +.Bl -tag -width "ZPOOL_SCRIPTS_AS_ROOT" +.It Ev ZPOOL_SCRIPTS_AS_ROOT +Allow a privilaged user to run the +.Nm zpool status/iostat +with the +.Fl c +option. Normally, only unprivilaged users are allowed to run +.Fl c . +.El +.Bl -tag -width "ZPOOL_SCRIPTS_PATH" +.It Ev ZPOOL_SCRIPTS_PATH +The search path for scripts when running +.Nm zpool status/iostat +with the +.Fl c option. This is a colon-separated list of directories and overrides the default -~/.zpool.d and /etc/zfs/zpool.d search paths. -.TP -.B "ZPOOL_SCRIPTS_ENABLED" -Allow a user to run \fBzpool status/iostat\fR with the \fB-c\fR option. If -ZPOOL_SCRIPTS_ENABLED is not set, it is assumed that the user is allowed to -run \fBzpool status/iostat -c\fR. - -.SH SEE ALSO -.sp -.LP -\fBzfs\fR(8), \fBzpool-features\fR(5), \fBzfs-events\fR(5), \fBzfs-module-parameters\fR(5) +.Pa ~/.zpool.d +and +.Pa /etc/zfs/zpool.d +search paths. +.El +.Bl -tag -width "ZPOOL_SCRIPTS_ENABLED" +.It Ev ZPOOL_SCRIPTS_ENABLED +Allow a user to run +.Nm zpool status/iostat +with the +.Fl c +option. If +.Sy ZPOOL_SCRIPTS_ENABLED +is not set, it is assumed that the user is allowed to run +.Nm zpool status/iostat -c . +.Sh INTERFACE STABILITY +.Sy Evolving +.Sh SEE ALSO +.Xr zed 8 +.Xr zfs 8 , +.Xr zfs-events 5 , +.Xr zfs-module-parameters 5 , +.Xr zpool-features 5 |