6 files changed, 48 insertions, 28 deletions
diff --git a/man/man7/dracut.zfs.7 b/man/man7/dracut.zfs.7
index 0f446fe2f..2db2f6639 100644
--- a/man/man7/dracut.zfs.7
+++ b/man/man7/dracut.zfs.7
@@ -71,7 +71,8 @@ module.
 .Pp
 Booting into a ZFS dataset requires
 .Sy mountpoint Ns = Ns Pa /
-to be set on the dataset containing the root filesystem (henceforth "the boot dataset") and at the very least either the
+to be set on the dataset containing the root filesystem (henceforth "the boot
+dataset") and at the very least either the
 .Sy bootfs
 property to be set to that dataset, or the
 .Sy root=
@@ -86,7 +87,8 @@ matching
 globs are deemed essential and will be mounted as well.
 .Pp
 .Xr zfs-mount-generator 8
-is recommended for proper functioning of the system afterward (correct mount properties, remounting, &c.).
+is recommended for proper functioning of the system afterward (correct mount
+properties, remounting, &c.).
 .
 .Sh CMDLINE
 .Ss Standard
@@ -122,7 +124,8 @@ cf.\&
 .Sx Temporary Mount Point Properties
 in
 .Xr zfsprops 7 .
-These properties will not last, since all filesystems will be re-mounted from the real root.
+These properties will not last, since all filesystems will be re-mounted from
+the real root.
 .
 .It Sy debug
 If specified,
@@ -263,7 +266,8 @@ Does nothing on
 .Nm systemd
 systems
 .Pq if Pa dracut-zfs-generator No succeeded .
-Otherwise, loads encryption key for the boot dataset from the console or via plymouth.
+Otherwise, loads encryption key for the boot dataset from the console or via
+plymouth.
 It may not work at all!
 .El
 .
diff --git a/man/man7/zfsconcepts.7 b/man/man7/zfsconcepts.7
index 31c8b53e7..18a9e9b5c 100644
--- a/man/man7/zfsconcepts.7
+++ b/man/man7/zfsconcepts.7
@@ -81,7 +81,8 @@ Bookmarks can be created extremely quickly, compared to snapshots, and they
 consume no additional space within the pool.
 Bookmarks can also have arbitrary names, much like snapshots.
 .Pp
-Unlike snapshots, bookmarks can not be accessed through the filesystem in any way.
+Unlike snapshots, bookmarks can not be accessed through the filesystem in any
+way.
 From a storage standpoint a bookmark just provides a way to reference
 when a snapshot was created as a distinct object.
 Bookmarks are initially tied to a snapshot, not the filesystem or volume,
diff --git a/man/man7/zfsprops.7 b/man/man7/zfsprops.7
index 0b7711da8..1f6ffb59e 100644
--- a/man/man7/zfsprops.7
+++ b/man/man7/zfsprops.7
@@ -192,7 +192,8 @@ and
 .It Sy guid
 The 64 bit GUID of this dataset or bookmark which does not change over its
 entire lifetime.
-When a snapshot is sent to another pool, the received snapshot has the same GUID.
+When a snapshot is sent to another pool, the received snapshot has the same
+GUID.
 Thus, the
 .Sy guid
 is suitable to identify a snapshot across pools.
@@ -259,7 +260,8 @@ this opaque token can be provided to
 to resume and complete the
 .Nm zfs Cm receive .
 .It Sy redact_snaps
-For bookmarks, this is the list of snapshot guids the bookmark contains a redaction
+For bookmarks, this is the list of snapshot guids the bookmark contains a
+redaction
 list for.
 For snapshots, this is the list of snapshot guids the snapshot is redacted with
 respect to.
@@ -798,7 +800,8 @@ Controls the compression algorithm used for this dataset.
 .Pp
 When set to
 .Sy on
-(the default), indicates that the current default compression algorithm should be used.
+(the default), indicates that the current default compression algorithm should
+be used.
 The default balances compression and decompression speed, with compression ratio
 and is expected to work well on a wide variety of workloads.
 Unlike all other settings for this property,
@@ -861,7 +864,8 @@ is equivalent to
 .Pp
 The
 .Sy zstd
-compression algorithm provides both high compression ratios and good performance.
+compression algorithm provides both high compression ratios and good
+performance.
 You can specify the
 .Sy zstd
 level by using the value
@@ -916,7 +920,8 @@ after compression, otherwise the compression will not be considered worthwhile
 and the block saved uncompressed.
 Note that when the logical block is less than
 8 times the disk sector size this effectively reduces the necessary compression
-ratio; for example, 8 KiB blocks on disks with 4 KiB disk sectors must compress to 1/2
+ratio; for example, 8 KiB blocks on disks with 4 KiB disk sectors must compress
+to 1/2
 or less of their original size.
 .It Xo
 .Sy context Ns = Ns Sy none Ns | Ns
@@ -1040,7 +1045,7 @@ file system.
 The default value is
 .Sy legacy .
 Setting this property to a value other than
-.Sy legacy No requires the Sy large_dnode No pool feature to be enabled.
+.Sy legacy No requires the Sy large_dnode No pool feature to be enabled .
 .Pp
 Consider setting
 .Sy dnodesize
@@ -1063,7 +1068,7 @@ if you need to receive a send stream of this dataset on a pool that doesn't
 enable the
 .Sy large_dnode
 feature, or if you need to import this pool on a system that doesn't support the
-.Sy large_dnode No feature.
+.Sy large_dnode No feature .
 .Pp
 This property can also be referred to by its shortened column name,
 .Sy dnsize .
@@ -1132,14 +1137,16 @@ is selected ZFS will ask for the key at the command prompt when it is required
 to access the encrypted data (see
 .Nm zfs Cm load-key
 for details).
-This setting will also allow the key to be passed in via the standard input stream,
+This setting will also allow the key to be passed in via the standard input
+stream,
 but users should be careful not to place keys which should be kept secret on
 the command line.
 If a file URI is selected, the key will be loaded from the
 specified absolute file path.
 If an HTTPS or HTTP URL is selected, it will be GETted using
 .Xr fetch 3 ,
-libcurl, or nothing, depending on compile-time configuration and run-time availability.
+libcurl, or nothing, depending on compile-time configuration and run-time
+availability.
 The
 .Sy SSL_CA_CERT_FILE
 environment variable can be set to set the location
@@ -1499,7 +1506,8 @@ future releases.
 When set to
 .Sy some ,
 ZFS stores an extra copy of only critical metadata.
-This can improve file create performance since less metadata needs to be written.
+This can improve file create performance since less metadata
+needs to be written.
 If a single on-disk block is corrupt, at worst a single user file can be lost.
 .Pp
 When set to
@@ -1642,7 +1650,8 @@ LDAP- or
 .Xr smbpasswd 5 Ns -based )
 by default.
 This means that any additional access control
-(disallow specific user specific access etc) must be done on the underlying file system.
+(disallow specific user specific access etc) must be done on the underlying file
+system.
 .It Sy sharenfs Ns = Ns Sy on Ns | Ns Sy off Ns | Ns Ar opts
 Controls whether the file system is shared via NFS, and what options are to be
 used.
diff --git a/man/man7/zpool-features.7 b/man/man7/zpool-features.7
index 0ff1a9a52..3ff3d97ba 100644
--- a/man/man7/zpool-features.7
+++ b/man/man7/zpool-features.7
@@ -62,7 +62,8 @@ Refer to the documentation for the ZFS
 implementation that created the pool for information about those features.
 .Pp
 Each supported feature also has a short name.
-By convention a feature's short name is the portion of its GUID which follows the
+By convention a feature's short name is the portion of its GUID which follows
+the
 .Sq \&:
 .Po
 i.e.
@@ -167,7 +168,8 @@ separated by whitespace and/or commas.
 Only features present in all files are enabled.
 .Pp
 Simple sanity checks are applied to the files:
-they must be between 1 B and 16 KiB in size, and must end with a newline character.
+they must be between 1 B and 16 KiB in size, and must end with a newline
+character.
 .Pp
 The requested features are applied when a pool is created using
 .Nm zpool Cm create Fl o Sy compatibility Ns = Ns Ar …
@@ -268,7 +270,7 @@ or when a new file is created under that filesystem. \
 The upgrade can also be triggered on filesystems via \
 Nm zfs Cm set Sy version Ns = Ns Sy current Ar fs . \
 No The upgrade process runs in the background and may take a while to complete \
-for filesystems containing large amounts of files.
+for filesystems containing large amounts of files .
 .
 .de checksum-spiel
 When the
@@ -339,7 +341,8 @@ while
 is non-zero.
 .
 .feature org.openzfs blake3 no extensible_dataset
-This feature enables the use of the BLAKE3 hash algorithm for checksum and dedup.
+This feature enables the use of the BLAKE3 hash algorithm for checksum and
+dedup.
 BLAKE3 is a secure hash algorithm focused on high performance.
 .Pp
 .checksum-spiel blake3
diff --git a/man/man7/zpoolconcepts.7 b/man/man7/zpoolconcepts.7
index c181ea3b8..4ef96b157 100644
--- a/man/man7/zpoolconcepts.7
+++ b/man/man7/zpoolconcepts.7
@@ -91,7 +91,7 @@ vdev type is an alias for
 .Pp
 A raidz group with
 .Em N No disks of size Em X No with Em P No parity disks can hold approximately
-.Em (N-P)*X No bytes and can withstand Em P No devices failing without losing data.
+.Em (N-P)*X No bytes and can withstand Em P No devices failing without losing data .
 The minimum number of devices in a raidz group is one more than the number of
 parity disks.
 The recommended number is between 3 and 9 to help increase performance.
@@ -99,7 +99,7 @@ The recommended number is between 3 and 9 to help increase performance.
 A variant of raidz that provides integrated distributed hot spares which
 allows for faster resilvering while retaining the benefits of raidz.
 A dRAID vdev is constructed from multiple internal raidz groups, each with
-.Em D No data devices and Em P No parity devices.
+.Em D No data devices and Em P No parity devices .
 These groups are distributed over all of the children in order to fully
 utilize the available disk performance.
 .Pp
@@ -119,7 +119,7 @@ recommended to also add a mirrored
 vdev to store those blocks.
 .Pp
 In regards to I/O, performance is similar to raidz since for any read all
-.Em D No data disks must be accessed.
+.Em D No data disks must be accessed .
 Delivered random IOPS can be reasonably approximated as
 .Sy floor((N-S)/(D+P))*single_drive_IOPS .
 .Pp
@@ -136,7 +136,7 @@ vdev type is an alias for
 .Sy draid1 .
 .Pp
 A dRAID with
-.Em N No disks of size Em X , D No data disks per redundancy group, Em P
+.Em N No disks of size Em X , D No data disks per redundancy group , Em P
 .No parity level, and Em S No distributed hot spares can hold approximately
 .Em (N-S)*(D/(D+P))*X No bytes and can withstand Em P
 devices failing without losing data.
@@ -151,7 +151,7 @@ The parity level (1-3).
 .It Ar data
 The number of data devices per redundancy group.
 In general, a smaller value of
-.Em D No will increase IOPS, improve the compression ratio,
+.Em D No will increase IOPS, improve the compression ratio ,
 and speed up resilvering at the expense of total usable capacity.
 Defaults to
 .Em 8 , No unless Em N-P-S No is less than Em 8 .
diff --git a/man/man7/zpoolprops.7 b/man/man7/zpoolprops.7
index 2164c1260..7be0a21d9 100644
--- a/man/man7/zpoolprops.7
+++ b/man/man7/zpoolprops.7
@@ -82,11 +82,13 @@ By contrast, the
 property describes how much new data can be written to ZFS filesystems/volumes.
 The zpool
 .Sy free
-property is not generally useful for this purpose, and can be substantially more than the zfs
+property is not generally useful for this purpose, and can be substantially more
+than the zfs
 .Sy available
 space.
 This discrepancy is due to several factors, including raidz parity;
-zfs reservation, quota, refreservation, and refquota properties; and space set aside by
+zfs reservation, quota, refreservation, and refquota properties; and space set
+aside by
 .Sy spa_slop_shift
 (see
 .Xr zfs 4
@@ -272,7 +274,8 @@ using the
 command.
 .It Sy bootfs Ns = Ns Sy (unset) Ns | Ns Ar pool Ns Op / Ns Ar dataset
 Identifies the default bootable dataset for the root pool.
-This property is expected to be set mainly by the installation and upgrade programs.
+This property is expected to be set mainly by the installation and upgrade
+programs.
 Not all Linux distribution boot processes use the bootfs property.
 .It Sy cachefile Ns = Ns Ar path Ns | Ns Sy none
 Controls the location of where the pool configuration is cached.