diff options
Diffstat (limited to 'lib')
| -rw-r--r-- | lib/libzfs/Makefile.am | 1 | ||||
| -rw-r--r-- | lib/libzfs/libzfs_fru.c | 475 | ||||
| -rw-r--r-- | lib/libzfs/libzfs_util.c | 1 |
3 files changed, 0 insertions, 477 deletions
diff --git a/lib/libzfs/Makefile.am b/lib/libzfs/Makefile.am index cae4b7c16..7389f002d 100644 --- a/lib/libzfs/Makefile.am +++ b/lib/libzfs/Makefile.am @@ -21,7 +21,6 @@ USER_C = \ libzfs_crypto.c \ libzfs_dataset.c \ libzfs_diff.c \ - libzfs_fru.c \ libzfs_import.c \ libzfs_iter.c \ libzfs_mount.c \ diff --git a/lib/libzfs/libzfs_fru.c b/lib/libzfs/libzfs_fru.c deleted file mode 100644 index 2ee8bdfb2..000000000 --- a/lib/libzfs/libzfs_fru.c +++ /dev/null @@ -1,475 +0,0 @@ -/* - * CDDL HEADER START - * - * The contents of this file are subject to the terms of the - * Common Development and Distribution License (the "License"). - * You may not use this file except in compliance with the License. - * - * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE - * or http://www.opensolaris.org/os/licensing. - * See the License for the specific language governing permissions - * and limitations under the License. - * - * When distributing Covered Code, include this CDDL HEADER in each - * file and include the License file at usr/src/OPENSOLARIS.LICENSE. - * If applicable, add the following below this CDDL HEADER, with the - * fields enclosed by brackets "[]" replaced with your own identifying - * information: Portions Copyright [yyyy] [name of copyright owner] - * - * CDDL HEADER END - */ - -/* - * Copyright 2009 Sun Microsystems, Inc. All rights reserved. - * Use is subject to license terms. - */ - -#include <dlfcn.h> -#include <errno.h> -#include <libintl.h> -#include <link.h> -#include <pthread.h> -#include <strings.h> -#include <unistd.h> - -#include <libzfs.h> - -#if defined(HAVE_LIBTOPO) - -#include <fm/libtopo.h> -#include <sys/fm/protocol.h> -#include <sys/systeminfo.h> - -#include "libzfs_impl.h" - -/* - * This file is responsible for determining the relationship between I/O - * devices paths and physical locations. In the world of MPxIO and external - * enclosures, the device path is not synonymous with the physical location. - * If you remove a drive and insert it into a different slot, it will end up - * with the same path under MPxIO. If you recable storage enclosures, the - * device paths may change. All of this makes it difficult to implement the - * 'autoreplace' property, which is supposed to automatically manage disk - * replacement based on physical slot. - * - * In order to work around these limitations, we have a per-vdev FRU property - * that is the libtopo path (minus disk-specific authority information) to the - * physical location of the device on the system. This is an optional - * property, and is only needed when using the 'autoreplace' property or when - * generating FMA faults against vdevs. - */ - -/* - * Because the FMA packages depend on ZFS, we have to dlopen() libtopo in case - * it is not present. We only need this once per library instance, so it is - * not part of the libzfs handle. - */ -static void *_topo_dlhandle; -static topo_hdl_t *(*_topo_open)(int, const char *, int *); -static void (*_topo_close)(topo_hdl_t *); -static char *(*_topo_snap_hold)(topo_hdl_t *, const char *, int *); -static void (*_topo_snap_release)(topo_hdl_t *); -static topo_walk_t *(*_topo_walk_init)(topo_hdl_t *, const char *, - topo_walk_cb_t, void *, int *); -static int (*_topo_walk_step)(topo_walk_t *, int); -static void (*_topo_walk_fini)(topo_walk_t *); -static void (*_topo_hdl_strfree)(topo_hdl_t *, char *); -static char *(*_topo_node_name)(tnode_t *); -static int (*_topo_prop_get_string)(tnode_t *, const char *, const char *, - char **, int *); -static int (*_topo_node_fru)(tnode_t *, nvlist_t **, nvlist_t *, int *); -static int (*_topo_fmri_nvl2str)(topo_hdl_t *, nvlist_t *, char **, int *); -static int (*_topo_fmri_strcmp_noauth)(topo_hdl_t *, const char *, - const char *); - -#define ZFS_FRU_HASH_SIZE 257 - -static size_t -fru_strhash(const char *key) -{ - ulong_t g, h = 0; - const char *p; - - for (p = key; *p != '\0'; p++) { - h = (h << 4) + *p; - - if ((g = (h & 0xf0000000)) != 0) { - h ^= (g >> 24); - h ^= g; - } - } - - return (h % ZFS_FRU_HASH_SIZE); -} - -static int -libzfs_fru_gather(topo_hdl_t *thp, tnode_t *tn, void *arg) -{ - libzfs_handle_t *hdl = arg; - nvlist_t *fru; - char *devpath, *frustr; - int err; - libzfs_fru_t *frup; - size_t idx; - - /* - * If this is the chassis node, and we don't yet have the system - * chassis ID, then fill in this value now. - */ - if (hdl->libzfs_chassis_id[0] == '\0' && - strcmp(_topo_node_name(tn), "chassis") == 0) { - if (_topo_prop_get_string(tn, FM_FMRI_AUTHORITY, - FM_FMRI_AUTH_CHASSIS, &devpath, &err) == 0) - (void) strlcpy(hdl->libzfs_chassis_id, devpath, - sizeof (hdl->libzfs_chassis_id)); - } - - /* - * Skip non-disk nodes. - */ - if (strcmp(_topo_node_name(tn), "disk") != 0) - return (TOPO_WALK_NEXT); - - /* - * Get the devfs path and FRU. - */ - if (_topo_prop_get_string(tn, "io", "devfs-path", &devpath, &err) != 0) - return (TOPO_WALK_NEXT); - - if (libzfs_fru_lookup(hdl, devpath) != NULL) { - _topo_hdl_strfree(thp, devpath); - return (TOPO_WALK_NEXT); - } - - if (_topo_node_fru(tn, &fru, NULL, &err) != 0) { - _topo_hdl_strfree(thp, devpath); - return (TOPO_WALK_NEXT); - } - - /* - * Convert the FRU into a string. - */ - if (_topo_fmri_nvl2str(thp, fru, &frustr, &err) != 0) { - nvlist_free(fru); - _topo_hdl_strfree(thp, devpath); - return (TOPO_WALK_NEXT); - } - - nvlist_free(fru); - - /* - * Finally, we have a FRU string and device path. Add it to the hash. - */ - if ((frup = calloc(sizeof (libzfs_fru_t), 1)) == NULL) { - _topo_hdl_strfree(thp, devpath); - _topo_hdl_strfree(thp, frustr); - return (TOPO_WALK_NEXT); - } - - if ((frup->zf_device = strdup(devpath)) == NULL || - (frup->zf_fru = strdup(frustr)) == NULL) { - free(frup->zf_device); - free(frup); - _topo_hdl_strfree(thp, devpath); - _topo_hdl_strfree(thp, frustr); - return (TOPO_WALK_NEXT); - } - - _topo_hdl_strfree(thp, devpath); - _topo_hdl_strfree(thp, frustr); - - idx = fru_strhash(frup->zf_device); - frup->zf_chain = hdl->libzfs_fru_hash[idx]; - hdl->libzfs_fru_hash[idx] = frup; - frup->zf_next = hdl->libzfs_fru_list; - hdl->libzfs_fru_list = frup; - - return (TOPO_WALK_NEXT); -} - -/* - * Called during initialization to setup the dynamic libtopo connection. - */ -#pragma init(libzfs_init_fru) -static void -libzfs_init_fru(void) -{ - char path[MAXPATHLEN]; - char isa[257]; - -#if defined(_LP64) - if (sysinfo(SI_ARCHITECTURE_64, isa, sizeof (isa)) < 0) - isa[0] = '\0'; -#else - isa[0] = '\0'; -#endif - (void) snprintf(path, sizeof (path), - "/usr/lib/fm/%s/libtopo.so", isa); - - if ((_topo_dlhandle = dlopen(path, RTLD_LAZY)) == NULL) - return; - - _topo_open = (topo_hdl_t *(*)()) - dlsym(_topo_dlhandle, "topo_open"); - _topo_close = (void (*)()) - dlsym(_topo_dlhandle, "topo_close"); - _topo_snap_hold = (char *(*)()) - dlsym(_topo_dlhandle, "topo_snap_hold"); - _topo_snap_release = (void (*)()) - dlsym(_topo_dlhandle, "topo_snap_release"); - _topo_walk_init = (topo_walk_t *(*)()) - dlsym(_topo_dlhandle, "topo_walk_init"); - _topo_walk_step = (int (*)()) - dlsym(_topo_dlhandle, "topo_walk_step"); - _topo_walk_fini = (void (*)()) - dlsym(_topo_dlhandle, "topo_walk_fini"); - _topo_hdl_strfree = (void (*)()) - dlsym(_topo_dlhandle, "topo_hdl_strfree"); - _topo_node_name = (char *(*)()) - dlsym(_topo_dlhandle, "topo_node_name"); - _topo_prop_get_string = (int (*)()) - dlsym(_topo_dlhandle, "topo_prop_get_string"); - _topo_node_fru = (int (*)()) - dlsym(_topo_dlhandle, "topo_node_fru"); - _topo_fmri_nvl2str = (int (*)()) - dlsym(_topo_dlhandle, "topo_fmri_nvl2str"); - _topo_fmri_strcmp_noauth = (int (*)()) - dlsym(_topo_dlhandle, "topo_fmri_strcmp_noauth"); - - if (_topo_open == NULL || _topo_close == NULL || - _topo_snap_hold == NULL || _topo_snap_release == NULL || - _topo_walk_init == NULL || _topo_walk_step == NULL || - _topo_walk_fini == NULL || _topo_hdl_strfree == NULL || - _topo_node_name == NULL || _topo_prop_get_string == NULL || - _topo_node_fru == NULL || _topo_fmri_nvl2str == NULL || - _topo_fmri_strcmp_noauth == NULL) { - (void) dlclose(_topo_dlhandle); - _topo_dlhandle = NULL; - } -} - -/* - * Refresh the mappings from device path -> FMRI. We do this by walking the - * hc topology looking for disk nodes, and recording the io/devfs-path and FRU. - * Note that we strip out the disk-specific authority information (serial, - * part, revision, etc) so that we are left with only the identifying - * characteristics of the slot (hc path and chassis-id). - */ -void -libzfs_fru_refresh(libzfs_handle_t *hdl) -{ - int err; - char *uuid; - topo_hdl_t *thp; - topo_walk_t *twp; - - if (_topo_dlhandle == NULL) - return; - - /* - * Clear the FRU hash and initialize our basic structures. - */ - libzfs_fru_clear(hdl, B_FALSE); - - if ((hdl->libzfs_topo_hdl = _topo_open(TOPO_VERSION, - NULL, &err)) == NULL) - return; - - thp = hdl->libzfs_topo_hdl; - - if ((uuid = _topo_snap_hold(thp, NULL, &err)) == NULL) - return; - - _topo_hdl_strfree(thp, uuid); - - if (hdl->libzfs_fru_hash == NULL && - (hdl->libzfs_fru_hash = - calloc(ZFS_FRU_HASH_SIZE, sizeof (void *))) == NULL) - return; - - /* - * We now have a topo snapshot, so iterate over the hc topology looking - * for disks to add to the hash. - */ - twp = _topo_walk_init(thp, FM_FMRI_SCHEME_HC, - libzfs_fru_gather, hdl, &err); - if (twp != NULL) { - (void) _topo_walk_step(twp, TOPO_WALK_CHILD); - _topo_walk_fini(twp); - } -} - -/* - * Given a devfs path, return the FRU for the device, if known. This will - * automatically call libzfs_fru_refresh() if it hasn't already been called by - * the consumer. The string returned is valid until the next call to - * libzfs_fru_refresh(). - */ -const char * -libzfs_fru_lookup(libzfs_handle_t *hdl, const char *devpath) -{ - size_t idx = fru_strhash(devpath); - libzfs_fru_t *frup; - - if (hdl->libzfs_fru_hash == NULL) - libzfs_fru_refresh(hdl); - - if (hdl->libzfs_fru_hash == NULL) - return (NULL); - - for (frup = hdl->libzfs_fru_hash[idx]; frup != NULL; - frup = frup->zf_chain) { - if (strcmp(devpath, frup->zf_device) == 0) - return (frup->zf_fru); - } - - return (NULL); -} - -/* - * Given a fru path, return the device path. This will automatically call - * libzfs_fru_refresh() if it hasn't already been called by the consumer. The - * string returned is valid until the next call to libzfs_fru_refresh(). - */ -const char * -libzfs_fru_devpath(libzfs_handle_t *hdl, const char *fru) -{ - libzfs_fru_t *frup; - size_t idx; - - if (hdl->libzfs_fru_hash == NULL) - libzfs_fru_refresh(hdl); - - if (hdl->libzfs_fru_hash == NULL) - return (NULL); - - for (idx = 0; idx < ZFS_FRU_HASH_SIZE; idx++) { - for (frup = hdl->libzfs_fru_hash[idx]; frup != NULL; - frup = frup->zf_next) { - if (_topo_fmri_strcmp_noauth(hdl->libzfs_topo_hdl, - fru, frup->zf_fru)) - return (frup->zf_device); - } - } - - return (NULL); -} - -/* - * Change the stored FRU for the given vdev. - */ -int -zpool_fru_set(zpool_handle_t *zhp, uint64_t vdev_guid, const char *fru) -{ - zfs_cmd_t zc = {"\0"}; - - (void) strncpy(zc.zc_name, zhp->zpool_name, sizeof (zc.zc_name)); - (void) strncpy(zc.zc_value, fru, sizeof (zc.zc_value)); - zc.zc_guid = vdev_guid; - - if (zfs_ioctl(zhp->zpool_hdl, ZFS_IOC_VDEV_SETFRU, &zc) != 0) - return (zpool_standard_error_fmt(zhp->zpool_hdl, errno, - dgettext(TEXT_DOMAIN, "cannot set FRU"))); - - return (0); -} - -/* - * Compare to two FRUs, ignoring any authority information. - */ -boolean_t -libzfs_fru_compare(libzfs_handle_t *hdl, const char *a, const char *b) -{ - if (hdl->libzfs_fru_hash == NULL) - libzfs_fru_refresh(hdl); - - if (hdl->libzfs_fru_hash == NULL) - return (strcmp(a, b) == 0); - - return (_topo_fmri_strcmp_noauth(hdl->libzfs_topo_hdl, a, b)); -} - -/* - * This special function checks to see whether the FRU indicates it's supposed - * to be in the system chassis, but the chassis-id doesn't match. This can - * happen in a clustered case, where both head nodes have the same logical - * disk, but opening the device on the other head node is meaningless. - */ -boolean_t -libzfs_fru_notself(libzfs_handle_t *hdl, const char *fru) -{ - const char *chassisid; - size_t len; - - if (hdl->libzfs_fru_hash == NULL) - libzfs_fru_refresh(hdl); - - if (hdl->libzfs_chassis_id[0] == '\0') - return (B_FALSE); - - if (strstr(fru, "/chassis=0/") == NULL) - return (B_FALSE); - - if ((chassisid = strstr(fru, ":chassis-id=")) == NULL) - return (B_FALSE); - - chassisid += 12; - len = strlen(hdl->libzfs_chassis_id); - if (strncmp(chassisid, hdl->libzfs_chassis_id, len) == 0 && - (chassisid[len] == '/' || chassisid[len] == ':')) - return (B_FALSE); - - return (B_TRUE); -} - -/* - * Clear memory associated with the FRU hash. - */ -void -libzfs_fru_clear(libzfs_handle_t *hdl, boolean_t final) -{ - libzfs_fru_t *frup; - - while ((frup = hdl->libzfs_fru_list) != NULL) { - hdl->libzfs_fru_list = frup->zf_next; - free(frup->zf_device); - free(frup->zf_fru); - free(frup); - } - - hdl->libzfs_fru_list = NULL; - - if (hdl->libzfs_topo_hdl != NULL) { - _topo_snap_release(hdl->libzfs_topo_hdl); - _topo_close(hdl->libzfs_topo_hdl); - hdl->libzfs_topo_hdl = NULL; - } - - if (final) { - free(hdl->libzfs_fru_hash); - } else if (hdl->libzfs_fru_hash != NULL) { - bzero(hdl->libzfs_fru_hash, - ZFS_FRU_HASH_SIZE * sizeof (void *)); - } -} - -#else /* HAVE_LIBTOPO */ - -/* - * Compare to two FRUs, ignoring any authority information. - */ -boolean_t -libzfs_fru_compare(libzfs_handle_t *hdl, const char *a, const char *b) -{ - return (B_FALSE); -} - -/* - * Clear memory associated with the FRU hash. - */ -void -libzfs_fru_clear(libzfs_handle_t *hdl, boolean_t final) -{ -} - -#endif /* HAVE_LIBTOPO */ diff --git a/lib/libzfs/libzfs_util.c b/lib/libzfs/libzfs_util.c index d4414b0c9..e13fee16d 100644 --- a/lib/libzfs/libzfs_util.c +++ b/lib/libzfs/libzfs_util.c @@ -1070,7 +1070,6 @@ libzfs_fini(libzfs_handle_t *hdl) (void) fclose(hdl->libzfs_sharetab); zfs_uninit_libshare(hdl); zpool_free_handles(hdl); - libzfs_fru_clear(hdl, B_TRUE); namespace_clear(hdl); libzfs_mnttab_fini(hdl); libzfs_core_fini(); |