aboutsummaryrefslogtreecommitdiffstats
path: root/cmd/zpool/zpool.d/smart
diff options
context:
space:
mode:
Diffstat (limited to 'cmd/zpool/zpool.d/smart')
-rwxr-xr-xcmd/zpool/zpool.d/smart132
1 files changed, 116 insertions, 16 deletions
diff --git a/cmd/zpool/zpool.d/smart b/cmd/zpool/zpool.d/smart
index 4bc3af39d..64b5f6e4e 100755
--- a/cmd/zpool/zpool.d/smart
+++ b/cmd/zpool/zpool.d/smart
@@ -24,8 +24,44 @@ ata_err: Show SMART ATA errors (ATA).
pwr_cyc: Show SMART power cycle count (ATA).
serial: Show disk serial number.
nvme_err: Show SMART NVMe errors (NVMe).
+smart_test: Show SMART self-test results summary.
+test_type: Show SMART self-test type (short, long... ).
+test_status: Show SMART self-test status.
+test_progress: Show SMART self-test percentage done.
+test_ended: Show when the last SMART self-test ended (if supported).
"
+# Hack for developer testing
+#
+# If you set $samples to a directory containing smartctl output text files,
+# we will use them instead of running smartctl on the vdevs. This can be
+# useful if you want to test a bunch of different smartctl outputs. Also, if
+# $samples is set, and additional 'file' column is added to the zpool output
+# showing the filename.
+samples=
+
+# get_filename_from_dir DIR
+#
+# Look in directory DIR and return a filename from it. The filename returned
+# is chosen quasi-sequentially (based off our PID). This allows us to return
+# a different filename every time this script is invoked (which we do for each
+# vdev), without having to maintain state.
+get_filename_from_dir()
+{
+ dir=$1
+ pid="$$"
+ num_files=$(find "$dir" -maxdepth 1 -type f | wc -l)
+ mod=$((pid % num_files))
+ i=0
+ find "$dir" -type f -printf "%f\n" | while read -r file ; do
+ if [ "$mod" = "$i" ] ; then
+ echo "$file"
+ break
+ fi
+ i=$((i+1))
+ done
+}
+
script=$(basename "$0")
if [ "$1" = "-h" ] ; then
@@ -35,8 +71,16 @@ fi
smartctl_path=$(which smartctl)
-if [ -b "$VDEV_UPATH" ] && [ -x "$smartctl_path" ]; then
- raw_out=$(eval "sudo $smartctl_path -a $VDEV_UPATH")
+if [ -b "$VDEV_UPATH" ] && [ -x "$smartctl_path" ] || [ -n "$samples" ] ; then
+ if [ -n "$samples" ] ; then
+ # cat a smartctl output text file instead of running smartctl
+ # on a vdev (only used for developer testing).
+ file=$(get_filename_from_dir $samples)
+ echo "file=$file"
+ raw_out=$(cat "$samples/$file")
+ else
+ raw_out=$(eval "sudo $smartctl_path -a $VDEV_UPATH")
+ fi
# What kind of drive are we? Look for the right line in smartctl:
#
@@ -49,7 +93,6 @@ if [ -b "$VDEV_UPATH" ] && [ -x "$smartctl_path" ]; then
# NVMe:
# SMART/Health Information (NVMe Log 0xnn, NSID 0xnn)
#
- type=$(echo "$raw_out" | grep -m 1 -Eo '^ATA|NVMe|SAS$')
out=$(echo "$raw_out" | awk '
# SAS specific
/read:/{print "rrd="$4"\nr_cor="$5"\nr_proc="$7"\nr_ucor="$8}
@@ -58,10 +101,11 @@ if [ -b "$VDEV_UPATH" ] && [ -x "$smartctl_path" ]; then
/Elements in grown defect list/{print "defect="$6}
# SAS common
+/SAS/{type="sas"}
/Drive Temperature:/{print "temp="$4}
# Status can be a long string, substitute spaces for '_'
/SMART Health Status:/{printf "health="; for(i=4;i<=NF-1;i++){printf "%s_", $i}; printf "%s\n", $i}
-/number of hours powered up/{print "hours_on="$7}
+/number of hours powered up/{print "hours_on="$7; hours_on=int($7)}
/Serial number:/{print "serial="$3}
# SATA specific
@@ -74,13 +118,16 @@ if [ -b "$VDEV_UPATH" ] && [ -x "$smartctl_path" ]; then
/Power_Cycle_Count/{print "pwr_cyc="$10}
# SATA common
+/SATA/{type="sata"}
/Temperature_Celsius/{print "temp="$10}
/Airflow_Temperature_Cel/{print "temp="$10}
+/Current Temperature:/{print "temp="$3}
/SMART overall-health self-assessment test result:/{print "health="$6}
-/Power_On_Hours/{print "hours_on="$10}
+/Power_On_Hours/{print "hours_on="$10; hours_on=int($10)}
/Serial Number:/{print "serial="$3}
# NVMe common
+/NVMe/{type="nvme"}
/Temperature:/{print "temp="$2}
/SMART overall-health self-assessment test result:/{print "health="$6}
/Power On Hours:/{gsub("[^0-9]","",$4); print "hours_on="$4}
@@ -90,39 +137,92 @@ if [ -b "$VDEV_UPATH" ] && [ -x "$smartctl_path" ]; then
# NVMe specific
/Media and Data Integrity Errors:/{print "nvme_err="$6}
-END {ORS="\n"; print ""}
+# SMART self-test info
+/Self-test execution status:/{progress=tolower($4)} # SAS
+/SMART Self-test log/{test_seen=1} # SAS
+/SMART Extended Self-test Log/{test_seen=1} # SATA
+/# 1/{
+ test_type=tolower($3"_"$4);
+ # Status could be one word ("Completed") or multiple ("Completed: read
+ # failure"). Look for the ":" to see if we need to grab more words.
+
+ if ($5 ~ ":")
+ status=tolower($5""$6"_"$7)
+ else
+ status=tolower($5)
+ if (status=="self")
+ status="running";
+
+ if (type == "sas") {
+ hours=int($(NF-4))
+ } else {
+ hours=int($(NF-1))
+ # SATA reports percent remaining, rather than percent done
+ # Convert it to percent done.
+ progress=(100-int($(NF-2)))"%"
+ }
+ # When we int()-ify "hours", it converts stuff like "NOW" and "-" into
+ # 0. In those cases, set it to hours_on, so they will cancel out in
+ # the "hours_ago" calculation later on.
+ if (hours == 0)
+ hours=hours_on
+
+ if (test_seen) {
+ print "test="hours_on
+ print "test_type="test_type
+ print "test_status="status
+ print "test_progress="progress
+ }
+ # Not all drives report hours_on
+ if (hours_on && hours) {
+ total_hours_ago=(hours_on-hours)
+ days_ago=int(total_hours_ago/24)
+ hours_ago=(total_hours_ago % 24)
+ if (days_ago != 0)
+ ago_str=days_ago"d"
+ if (hours_ago !=0)
+ ago_str=ago_str""hours_ago"h"
+ print "test_ended="ago_str
+ }
+}
+
+END {print "type="type; ORS="\n"; print ""}
');
fi
+type=$(echo "$out" | grep '^type=' | cut -d '=' -f 2)
-# if type is not set by now, either we don't have a block device
-# or smartctl failed. Either way, default to ATA and set out to
-# nothing
+# If type is not set by now, either we don't have a block device
+# or smartctl failed. Either way, default to ATA and set $out to
+# nothing.
if [ -z "$type" ]; then
- type="ATA"
+ type="sata"
out=
fi
case $script in
smart)
# Print temperature plus common predictors of drive failure
- if [ "$type" = "SAS" ] ; then
+ if [ "$type" = "sas" ] ; then
scripts="temp|health|r_ucor|w_ucor"
- elif [ "$type" = "ATA" ] ; then
+ elif [ "$type" = "sata" ] ; then
scripts="temp|health|ata_err|realloc|rep_ucor|cmd_to|pend_sec|off_ucor"
- elif [ "$type" = "NVMe" ] ; then
+ elif [ "$type" = "nvme" ] ; then
scripts="temp|health|nvme_err"
fi
;;
smartx)
# Print some other interesting stats
- if [ "$type" = "SAS" ] ; then
+ if [ "$type" = "sas" ] ; then
scripts="hours_on|defect|nonmed|r_proc|w_proc"
- elif [ "$type" = "ATA" ] ; then
+ elif [ "$type" = "sata" ] ; then
scripts="hours_on|pwr_cyc"
- elif [ "$type" = "NVMe" ] ; then
+ elif [ "$type" = "nvme" ] ; then
scripts="hours_on|pwr_cyc"
fi
;;
+smart_test)
+ scripts="test_type|test_status|test_progress|test_ended"
+ ;;
*)
scripts="$script"
esac