diff options
Diffstat (limited to 'cmd/zinject/translate.c')
-rw-r--r-- | cmd/zinject/translate.c | 474 |
1 files changed, 474 insertions, 0 deletions
diff --git a/cmd/zinject/translate.c b/cmd/zinject/translate.c new file mode 100644 index 000000000..c85e024b6 --- /dev/null +++ b/cmd/zinject/translate.c @@ -0,0 +1,474 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License (the "License"). + * You may not use this file except in compliance with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ +/* + * Copyright 2008 Sun Microsystems, Inc. All rights reserved. + * Use is subject to license terms. + */ + +#include <libzfs.h> + +#undef verify /* both libzfs.h and zfs_context.h want to define this */ + +#include <sys/zfs_context.h> + +#include <errno.h> +#include <fcntl.h> +#include <stdarg.h> +#include <stddef.h> +#include <stdio.h> +#include <stdlib.h> +#include <strings.h> +#include <sys/file.h> +#include <sys/mntent.h> +#include <sys/mnttab.h> +#include <sys/param.h> +#include <sys/stat.h> + +#include <sys/dmu.h> +#include <sys/dmu_objset.h> +#include <sys/dnode.h> +#include <sys/vdev_impl.h> + +#include <sys/mkdev.h> + +#include "zinject.h" + +extern void kernel_init(int); +extern void kernel_fini(void); + +static int debug; + +static void +ziprintf(const char *fmt, ...) +{ + va_list ap; + + if (!debug) + return; + + va_start(ap, fmt); + (void) vprintf(fmt, ap); + va_end(ap); +} + +/* + * Given a full path to a file, translate into a dataset name and a relative + * path within the dataset. 'dataset' must be at least MAXNAMELEN characters, + * and 'relpath' must be at least MAXPATHLEN characters. We also pass a stat64 + * buffer, which we need later to get the object ID. + */ +static int +parse_pathname(const char *fullpath, char *dataset, char *relpath, + struct stat64 *statbuf) +{ + struct extmnttab mp; + FILE *fp; + int match; + const char *rel; + + if (fullpath[0] != '/') { + (void) fprintf(stderr, "invalid object '%s': must be full " + "path\n", fullpath); + usage(); + return (-1); + } + + if (strlen(fullpath) >= MAXPATHLEN) { + (void) fprintf(stderr, "invalid object; pathname too long\n"); + return (-1); + } + + if (stat64(fullpath, statbuf) != 0) { + (void) fprintf(stderr, "cannot open '%s': %s\n", + fullpath, strerror(errno)); + return (-1); + } + + if ((fp = fopen(MNTTAB, "r")) == NULL) { + (void) fprintf(stderr, "cannot open /etc/mnttab\n"); + return (-1); + } + + match = 0; + while (getextmntent(fp, &mp, sizeof (mp)) == 0) { + if (makedev(mp.mnt_major, mp.mnt_minor) == statbuf->st_dev) { + match = 1; + break; + } + } + + if (!match) { + (void) fprintf(stderr, "cannot find mountpoint for '%s'\n", + fullpath); + return (-1); + } + + if (strcmp(mp.mnt_fstype, MNTTYPE_ZFS) != 0) { + (void) fprintf(stderr, "invalid path '%s': not a ZFS " + "filesystem\n", fullpath); + return (-1); + } + + if (strncmp(fullpath, mp.mnt_mountp, strlen(mp.mnt_mountp)) != 0) { + (void) fprintf(stderr, "invalid path '%s': mountpoint " + "doesn't match path\n", fullpath); + return (-1); + } + + (void) strcpy(dataset, mp.mnt_special); + + rel = fullpath + strlen(mp.mnt_mountp); + if (rel[0] == '/') + rel++; + (void) strcpy(relpath, rel); + + return (0); +} + +/* + * Convert from a (dataset, path) pair into a (objset, object) pair. Note that + * we grab the object number from the inode number, since looking this up via + * libzpool is a real pain. + */ +/* ARGSUSED */ +static int +object_from_path(const char *dataset, const char *path, struct stat64 *statbuf, + zinject_record_t *record) +{ + objset_t *os; + int err; + + /* + * Before doing any libzpool operations, call sync() to ensure that the + * on-disk state is consistent with the in-core state. + */ + sync(); + + if ((err = dmu_objset_open(dataset, DMU_OST_ZFS, + DS_MODE_USER | DS_MODE_READONLY, &os)) != 0) { + (void) fprintf(stderr, "cannot open dataset '%s': %s\n", + dataset, strerror(err)); + return (-1); + } + + record->zi_objset = dmu_objset_id(os); + record->zi_object = statbuf->st_ino; + + dmu_objset_close(os); + + return (0); +} + +/* + * Calculate the real range based on the type, level, and range given. + */ +static int +calculate_range(const char *dataset, err_type_t type, int level, char *range, + zinject_record_t *record) +{ + objset_t *os = NULL; + dnode_t *dn = NULL; + int err; + int ret = -1; + + /* + * Determine the numeric range from the string. + */ + if (range == NULL) { + /* + * If range is unspecified, set the range to [0,-1], which + * indicates that the whole object should be treated as an + * error. + */ + record->zi_start = 0; + record->zi_end = -1ULL; + } else { + char *end; + + /* XXX add support for suffixes */ + record->zi_start = strtoull(range, &end, 10); + + + if (*end == '\0') + record->zi_end = record->zi_start + 1; + else if (*end == ',') + record->zi_end = strtoull(end + 1, &end, 10); + + if (*end != '\0') { + (void) fprintf(stderr, "invalid range '%s': must be " + "a numeric range of the form 'start[,end]'\n", + range); + goto out; + } + } + + switch (type) { + case TYPE_DATA: + break; + + case TYPE_DNODE: + /* + * If this is a request to inject faults into the dnode, then we + * must translate the current (objset,object) pair into an + * offset within the metadnode for the objset. Specifying any + * kind of range with type 'dnode' is illegal. + */ + if (range != NULL) { + (void) fprintf(stderr, "range cannot be specified when " + "type is 'dnode'\n"); + goto out; + } + + record->zi_start = record->zi_object * sizeof (dnode_phys_t); + record->zi_end = record->zi_start + sizeof (dnode_phys_t); + record->zi_object = 0; + break; + } + + /* + * Get the dnode associated with object, so we can calculate the block + * size. + */ + if ((err = dmu_objset_open(dataset, DMU_OST_ANY, + DS_MODE_USER | DS_MODE_READONLY, &os)) != 0) { + (void) fprintf(stderr, "cannot open dataset '%s': %s\n", + dataset, strerror(err)); + goto out; + } + + if (record->zi_object == 0) { + dn = os->os->os_meta_dnode; + } else { + err = dnode_hold(os->os, record->zi_object, FTAG, &dn); + if (err != 0) { + (void) fprintf(stderr, "failed to hold dnode " + "for object %llu\n", + (u_longlong_t)record->zi_object); + goto out; + } + } + + + ziprintf("data shift: %d\n", (int)dn->dn_datablkshift); + ziprintf(" ind shift: %d\n", (int)dn->dn_indblkshift); + + /* + * Translate range into block IDs. + */ + if (record->zi_start != 0 || record->zi_end != -1ULL) { + record->zi_start >>= dn->dn_datablkshift; + record->zi_end >>= dn->dn_datablkshift; + } + + /* + * Check level, and then translate level 0 blkids into ranges + * appropriate for level of indirection. + */ + record->zi_level = level; + if (level > 0) { + ziprintf("level 0 blkid range: [%llu, %llu]\n", + record->zi_start, record->zi_end); + + if (level >= dn->dn_nlevels) { + (void) fprintf(stderr, "level %d exceeds max level " + "of object (%d)\n", level, dn->dn_nlevels - 1); + goto out; + } + + if (record->zi_start != 0 || record->zi_end != 0) { + int shift = dn->dn_indblkshift - SPA_BLKPTRSHIFT; + + for (; level > 0; level--) { + record->zi_start >>= shift; + record->zi_end >>= shift; + } + } + } + + ret = 0; +out: + if (dn) { + if (dn != os->os->os_meta_dnode) + dnode_rele(dn, FTAG); + } + if (os) + dmu_objset_close(os); + + return (ret); +} + +int +translate_record(err_type_t type, const char *object, const char *range, + int level, zinject_record_t *record, char *poolname, char *dataset) +{ + char path[MAXPATHLEN]; + char *slash; + struct stat64 statbuf; + int ret = -1; + + kernel_init(FREAD); + + debug = (getenv("ZINJECT_DEBUG") != NULL); + + ziprintf("translating: %s\n", object); + + if (MOS_TYPE(type)) { + /* + * MOS objects are treated specially. + */ + switch (type) { + case TYPE_MOS: + record->zi_type = 0; + break; + case TYPE_MOSDIR: + record->zi_type = DMU_OT_OBJECT_DIRECTORY; + break; + case TYPE_METASLAB: + record->zi_type = DMU_OT_OBJECT_ARRAY; + break; + case TYPE_CONFIG: + record->zi_type = DMU_OT_PACKED_NVLIST; + break; + case TYPE_BPLIST: + record->zi_type = DMU_OT_BPLIST; + break; + case TYPE_SPACEMAP: + record->zi_type = DMU_OT_SPACE_MAP; + break; + case TYPE_ERRLOG: + record->zi_type = DMU_OT_ERROR_LOG; + break; + } + + dataset[0] = '\0'; + (void) strcpy(poolname, object); + return (0); + } + + /* + * Convert a full path into a (dataset, file) pair. + */ + if (parse_pathname(object, dataset, path, &statbuf) != 0) + goto err; + + ziprintf(" dataset: %s\n", dataset); + ziprintf(" path: %s\n", path); + + /* + * Convert (dataset, file) into (objset, object) + */ + if (object_from_path(dataset, path, &statbuf, record) != 0) + goto err; + + ziprintf("raw objset: %llu\n", record->zi_objset); + ziprintf("raw object: %llu\n", record->zi_object); + + /* + * For the given object, calculate the real (type, level, range) + */ + if (calculate_range(dataset, type, level, (char *)range, record) != 0) + goto err; + + ziprintf(" objset: %llu\n", record->zi_objset); + ziprintf(" object: %llu\n", record->zi_object); + if (record->zi_start == 0 && + record->zi_end == -1ULL) + ziprintf(" range: all\n"); + else + ziprintf(" range: [%llu, %llu]\n", record->zi_start, + record->zi_end); + + /* + * Copy the pool name + */ + (void) strcpy(poolname, dataset); + if ((slash = strchr(poolname, '/')) != NULL) + *slash = '\0'; + + ret = 0; + +err: + kernel_fini(); + return (ret); +} + +int +translate_raw(const char *str, zinject_record_t *record) +{ + /* + * A raw bookmark of the form objset:object:level:blkid, where each + * number is a hexidecimal value. + */ + if (sscanf(str, "%llx:%llx:%x:%llx", (u_longlong_t *)&record->zi_objset, + (u_longlong_t *)&record->zi_object, &record->zi_level, + (u_longlong_t *)&record->zi_start) != 4) { + (void) fprintf(stderr, "bad raw spec '%s': must be of the form " + "'objset:object:level:blkid'\n", str); + return (-1); + } + + record->zi_end = record->zi_start; + + return (0); +} + +int +translate_device(const char *pool, const char *device, err_type_t label_type, + zinject_record_t *record) +{ + char *end; + zpool_handle_t *zhp; + nvlist_t *tgt; + boolean_t isspare, iscache; + + /* + * Given a device name or GUID, create an appropriate injection record + * with zi_guid set. + */ + if ((zhp = zpool_open(g_zfs, pool)) == NULL) + return (-1); + + record->zi_guid = strtoull(device, &end, 16); + if (record->zi_guid == 0 || *end != '\0') { + tgt = zpool_find_vdev(zhp, device, &isspare, &iscache, NULL); + + if (tgt == NULL) { + (void) fprintf(stderr, "cannot find device '%s' in " + "pool '%s'\n", device, pool); + return (-1); + } + + verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_GUID, + &record->zi_guid) == 0); + } + + switch (label_type) { + case TYPE_LABEL_UBERBLOCK: + record->zi_start = offsetof(vdev_label_t, vl_uberblock[0]); + record->zi_end = record->zi_start + VDEV_UBERBLOCK_RING - 1; + break; + case TYPE_LABEL_NVLIST: + record->zi_start = offsetof(vdev_label_t, vl_vdev_phys); + record->zi_end = record->zi_start + VDEV_PHYS_SIZE - 1; + break; + } + return (0); +} |