diff options
| -rw-r--r-- | scripts/common.sh | 443 |
1 files changed, 0 insertions, 443 deletions
diff --git a/scripts/common.sh b/scripts/common.sh deleted file mode 100644 index 66097570d..000000000 --- a/scripts/common.sh +++ /dev/null @@ -1,443 +0,0 @@ -#!/bin/bash -# -# Common support functions for testing scripts. If a .script-config -# files is available it will be sourced so in-tree kernel modules and -# utilities will be used. If no .script-config can be found then the -# installed kernel modules and utilities will be used. - -basedir="$(dirname $0)" - -SCRIPT_CONFIG=.script-config -if [ -f "${basedir}/../${SCRIPT_CONFIG}" ]; then -. "${basedir}/../${SCRIPT_CONFIG}" -else -MODULES=(zlib_deflate spl splat zavl znvpair zunicode zcommon zfs) -fi - -PROG="<define PROG>" -CLEANUP= -VERBOSE= -VERBOSE_FLAG= -FORCE= -FORCE_FLAG= -DUMP_LOG= -ERROR= -RAID0S=() -RAID10S=() -RAIDZS=() -RAIDZ2S=() -TESTS_RUN=${TESTS_RUN:-'*'} -TESTS_SKIP=${TESTS_SKIP:-} - -prefix=/usr/local -exec_prefix=${prefix} -libexecdir=${exec_prefix}/libexec -pkglibexecdir=${libexecdir}/zfs -bindir=${exec_prefix}/bin -sbindir=${exec_prefix}/sbin - -ETCDIR=${ETCDIR:-/etc} -DEVDIR=${DEVDIR:-/dev/disk/zpool} -ZPOOLDIR=${ZPOOLDIR:-${pkglibexecdir}/zpool-config} -ZPIOSDIR=${ZPIOSDIR:-${pkglibexecdir}/zpios-test} -ZPIOSPROFILEDIR=${ZPIOSPROFILEDIR:-${pkglibexecdir}/zpios-profile} - -ZDB=${ZDB:-${sbindir}/zdb} -ZFS=${ZFS:-${sbindir}/zfs} -ZINJECT=${ZINJECT:-${sbindir}/zinject} -ZPOOL=${ZPOOL:-${sbindir}/zpool} -ZPOOL_ID=${ZPOOL_ID:-${bindir}/zpool_id} -ZTEST=${ZTEST:-${sbindir}/ztest} -ZPIOS=${ZPIOS:-${sbindir}/zpios} - -COMMON_SH=${COMMON_SH:-${pkglibexecdir}/common.sh} -ZFS_SH=${ZFS_SH:-${pkglibexecdir}/zfs.sh} -ZPOOL_CREATE_SH=${ZPOOL_CREATE_SH:-${pkglibexecdir}/zpool-create.sh} -ZPIOS_SH=${ZPIOS_SH:-${pkglibexecdir}/zpios.sh} -ZPIOS_SURVEY_SH=${ZPIOS_SURVEY_SH:-${pkglibexecdir}/zpios-survey.sh} - -LDMOD=${LDMOD:-/sbin/modprobe} -LSMOD=${LSMOD:-/sbin/lsmod} -RMMOD=${RMMOD:-/sbin/rmmod} -INFOMOD=${INFOMOD:-/sbin/modinfo} -LOSETUP=${LOSETUP:-/sbin/losetup} -SYSCTL=${SYSCTL:-/sbin/sysctl} -UDEVADM=${UDEVADM:-/sbin/udevadm} -AWK=${AWK:-/usr/bin/awk} - -COLOR_BLACK="\033[0;30m" -COLOR_DK_GRAY="\033[1;30m" -COLOR_BLUE="\033[0;34m" -COLOR_LT_BLUE="\033[1;34m" -COLOR_GREEN="\033[0;32m" -COLOR_LT_GREEN="\033[1;32m" -COLOR_CYAN="\033[0;36m" -COLOR_LT_CYAN="\033[1;36m" -COLOR_RED="\033[0;31m" -COLOR_LT_RED="\033[1;31m" -COLOR_PURPLE="\033[0;35m" -COLOR_LT_PURPLE="\033[1;35m" -COLOR_BROWN="\033[0;33m" -COLOR_YELLOW="\033[1;33m" -COLOR_LT_GRAY="\033[0;37m" -COLOR_WHITE="\033[1;37m" -COLOR_RESET="\033[0m" - -die() { - echo -e "${PROG}: $1" >&2 - exit 1 -} - -msg() { - if [ ${VERBOSE} ]; then - echo "$@" - fi -} - -pass() { - echo -e "${COLOR_GREEN}Pass${COLOR_RESET}" -} - -fail() { - echo -e "${COLOR_RED}Fail${COLOR_RESET} ($1)" - exit $1 -} - -skip() { - echo -e "${COLOR_BROWN}Skip${COLOR_RESET}" -} - -spl_dump_log() { - ${SYSCTL} -w kernel.spl.debug.dump=1 &>/dev/null - local NAME=`dmesg | tail -n 1 | cut -f5 -d' '` - ${SPLBUILD}/cmd/spl ${NAME} >${NAME}.log - echo - echo "Dumped debug log: ${NAME}.log" - tail -n1 ${NAME}.log - echo - return 0 -} - -check_modules() { - local LOADED_MODULES=() - local MISSING_MODULES=() - - for MOD in ${MODULES[*]}; do - local NAME=`basename $MOD .ko` - - if ${LSMOD} | egrep -q "^${NAME}"; then - LOADED_MODULES=(${NAME} ${LOADED_MODULES[*]}) - fi - - if [ ${INFOMOD} ${MOD} 2>/dev/null ]; then - MISSING_MODULES=("\t${MOD}\n" ${MISSING_MODULES[*]}) - fi - done - - if [ ${#LOADED_MODULES[*]} -gt 0 ]; then - ERROR="Unload these modules with '${PROG} -u':\n" - ERROR="${ERROR}${LOADED_MODULES[*]}" - return 1 - fi - - if [ ${#MISSING_MODULES[*]} -gt 0 ]; then - ERROR="The following modules can not be found," - ERROR="${ERROR} ensure your source trees are built:\n" - ERROR="${ERROR}${MISSING_MODULES[*]}" - return 1 - fi - - return 0 -} - -load_module() { - local NAME=`basename $1 .ko` - - if [ ${VERBOSE} ]; then - echo "Loading ${NAME} ($@)" - fi - - ${LDMOD} $* || ERROR="Failed to load $1" return 1 - - return 0 -} - -load_modules() { - mkdir -p /etc/zfs - - for MOD in ${MODULES[*]}; do - local NAME=`basename ${MOD} .ko` - local VALUE= - - for OPT in "$@"; do - OPT_NAME=`echo ${OPT} | cut -f1 -d'='` - - if [ ${NAME} = "${OPT_NAME}" ]; then - VALUE=`echo ${OPT} | cut -f2- -d'='` - fi - done - - load_module ${MOD} ${VALUE} || return 1 - done - - if [ ${VERBOSE} ]; then - echo "Successfully loaded ZFS module stack" - fi - - return 0 -} - -unload_module() { - local NAME=`basename $1 .ko` - - if [ ${VERBOSE} ]; then - echo "Unloading ${NAME} ($@)" - fi - - ${RMMOD} ${NAME} || ERROR="Failed to unload ${NAME}" return 1 - - return 0 -} - -unload_modules() { - local MODULES_REVERSE=( $(echo ${MODULES[@]} | - ${AWK} '{for (i=NF;i>=1;i--) printf $i" "} END{print ""}') ) - - for MOD in ${MODULES_REVERSE[*]}; do - local NAME=`basename ${MOD} .ko` - local USE_COUNT=`${LSMOD} | - egrep "^${NAME} "| ${AWK} '{print $3}'` - - if [ "${USE_COUNT}" = 0 ] ; then - - if [ "${DUMP_LOG}" -a ${NAME} = "spl" ]; then - spl_dump_log - fi - - unload_module ${MOD} || return 1 - fi - done - - if [ ${VERBOSE} ]; then - echo "Successfully unloaded ZFS module stack" - fi - - return 0 -} - -unused_loop_device() { - for DEVICE in `ls -1 /dev/loop*`; do - ${LOSETUP} ${DEVICE} &>/dev/null - if [ $? -ne 0 ]; then - echo ${DEVICE} - return - fi - done - - die "Error: Unable to find unused loopback device" -} - -# -# This can be slightly dangerous because the loop devices we are -# cleanup up may not be ours. However, if the devices are currently -# in use we will not be able to remove them, and we only remove -# devices which include 'zpool' in the name. So any damage we might -# do should be limited to other zfs related testing. -# -cleanup_loop_devices() { - local TMP_FILE=`mktemp` - - ${LOSETUP} -a | tr -d '()' >${TMP_FILE} - ${AWK} -F":" -v losetup="$LOSETUP" \ - '/zpool/ { system("losetup -d "$1) }' ${TMP_FILE} - ${AWK} -F" " '/zpool/ { system("rm -f "$3) }' ${TMP_FILE} - - rm -f ${TMP_FILE} -} - -# -# The following udev helper functions assume that the provided -# udev rules file will create a /dev/disk/zpool/<CHANNEL><RANK> -# disk mapping. In this mapping each CHANNEL is represented by -# the letters a-z, and the RANK is represented by the numbers -# 1-n. A CHANNEL should identify a group of RANKS which are all -# attached to a single controller, each RANK represents a disk. -# This provides a simply mechanism to locate a specific drive -# given a known hardware configuration. -# -udev_setup() { - local SRC_PATH=$1 - - # When running in tree manually contruct symlinks in tree to - # the proper devices. Symlinks are installed for all entires - # in the config file regardless of if that device actually - # exists. When installed as a package udev can be relied on for - # this and it will only create links for devices which exist. - if [ ${INTREE} ]; then - PWD=`pwd` - mkdir -p ${DEVDIR}/ - cd ${DEVDIR}/ - ${AWK} '!/^#/ && /./ { system( \ - "ln -f -s /dev/disk/by-path/"$2" "$1";" \ - "ln -f -s /dev/disk/by-path/"$2"-part1 "$1"p1;" \ - "ln -f -s /dev/disk/by-path/"$2"-part9 "$1"p9;" \ - ) }' $SRC_PATH - cd ${PWD} - else - DST_FILE=`basename ${SRC_PATH} | cut -f1-2 -d'.'` - DST_PATH=/etc/zfs/${DST_FILE} - - if [ -e ${DST_PATH} ]; then - die "Error: Config ${DST_PATH} already exists" - fi - - cp ${SRC_PATH} ${DST_PATH} - - if [ -f ${UDEVADM} ]; then - ${UDEVADM} trigger - ${UDEVADM} settle - else - /sbin/udevtrigger - /sbin/udevsettle - fi - fi - - return 0 -} - -udev_cleanup() { - local SRC_PATH=$1 - - if [ ${INTREE} ]; then - PWD=`pwd` - cd ${DEVDIR}/ - ${AWK} '!/^#/ && /./ { system( \ - "rm -f "$1" "$1"p1 "$1"p9") }' $SRC_PATH - cd ${PWD} - fi - - return 0 -} - -udev_cr2d() { - local CHANNEL=`echo "obase=16; $1+96" | bc` - local RANK=$2 - - printf "\x${CHANNEL}${RANK}" -} - -udev_raid0_setup() { - local RANKS=$1 - local CHANNELS=$2 - local IDX=0 - - RAID0S=() - for RANK in `seq 1 ${RANKS}`; do - for CHANNEL in `seq 1 ${CHANNELS}`; do - DISK=`udev_cr2d ${CHANNEL} ${RANK}` - RAID0S[${IDX}]="${DEVDIR}/${DISK}" - let IDX=IDX+1 - done - done - - return 0 -} - -udev_raid10_setup() { - local RANKS=$1 - local CHANNELS=$2 - local IDX=0 - - RAID10S=() - for RANK in `seq 1 ${RANKS}`; do - for CHANNEL1 in `seq 1 2 ${CHANNELS}`; do - let CHANNEL2=CHANNEL1+1 - DISK1=`udev_cr2d ${CHANNEL1} ${RANK}` - DISK2=`udev_cr2d ${CHANNEL2} ${RANK}` - GROUP="${DEVDIR}/${DISK1} ${DEVDIR}/${DISK2}" - RAID10S[${IDX}]="mirror ${GROUP}" - let IDX=IDX+1 - done - done - - return 0 -} - -udev_raidz_setup() { - local RANKS=$1 - local CHANNELS=$2 - - RAIDZS=() - for RANK in `seq 1 ${RANKS}`; do - RAIDZ=("raidz") - - for CHANNEL in `seq 1 ${CHANNELS}`; do - DISK=`udev_cr2d ${CHANNEL} ${RANK}` - RAIDZ[${CHANNEL}]="${DEVDIR}/${DISK}" - done - - RAIDZS[${RANK}]="${RAIDZ[*]}" - done - - return 0 -} - -udev_raidz2_setup() { - local RANKS=$1 - local CHANNELS=$2 - - RAIDZ2S=() - for RANK in `seq 1 ${RANKS}`; do - RAIDZ2=("raidz2") - - for CHANNEL in `seq 1 ${CHANNELS}`; do - DISK=`udev_cr2d ${CHANNEL} ${RANK}` - RAIDZ2[${CHANNEL}]="${DEVDIR}/${DISK}" - done - - RAIDZ2S[${RANK}]="${RAIDZ2[*]}" - done - - return 0 -} - -run_one_test() { - local TEST_NUM=$1 - local TEST_NAME=$2 - - printf "%-4d %-36s " ${TEST_NUM} "${TEST_NAME}" - test_${TEST_NUM} -} - -skip_one_test() { - local TEST_NUM=$1 - local TEST_NAME=$2 - - printf "%-4d %-36s " ${TEST_NUM} "${TEST_NAME}" - skip -} - -run_test() { - local TEST_NUM=$1 - local TEST_NAME=$2 - - for i in ${TESTS_SKIP[@]}; do - if [[ $i == ${TEST_NUM} ]] ; then - skip_one_test ${TEST_NUM} "${TEST_NAME}" - return 0 - fi - done - - if [ "${TESTS_RUN[0]}" = "*" ]; then - run_one_test ${TEST_NUM} "${TEST_NAME}" - else - for i in ${TESTS_RUN[@]}; do - if [[ $i == ${TEST_NUM} ]] ; then - run_one_test ${TEST_NUM} "${TEST_NAME}" - return 0 - fi - done - - skip_one_test ${TEST_NUM} "${TEST_NAME}" - fi -} |