diff options
-rwxr-xr-x | cmd/vdev_id/vdev_id | 74 | ||||
-rw-r--r-- | etc/zfs/vdev_id.conf.sas_direct.example | 3 | ||||
-rw-r--r-- | man/man5/vdev_id.conf.5 | 34 | ||||
-rw-r--r-- | udev/rules.d/69-vdev.rules.in | 4 |
4 files changed, 112 insertions, 3 deletions
diff --git a/cmd/vdev_id/vdev_id b/cmd/vdev_id/vdev_id index 4c7b270a8..3796ab488 100755 --- a/cmd/vdev_id/vdev_id +++ b/cmd/vdev_id/vdev_id @@ -104,6 +104,7 @@ Usage: vdev_id [-h] -c specify name of alernate config file [default=$CONFIG] -d specify basename of device (i.e. sda) + -e Create enclose device symlinks only (/dev/by-enclosure) -g Storage network topology [default="$TOPOLOGY"] -m Run in multipath mode -p number of phy's per switch port [default=$PHYS_PER_PORT] @@ -417,6 +418,45 @@ scsi_handler() { echo ${CHAN}${SLOT}${PART} } +# Figure out the name for the enclosure symlink +enclosure_handler () { + # We get all the info we need from udev's DEVPATH variable: + # + # DEVPATH=/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0/host0/subsystem/devices/0:0:0:0/scsi_generic/sg0 + + # Get the enclosure ID ("0:0:0:0") + ENC=$(basename $(readlink -m "/sys/$DEVPATH/../..")) + if [ ! -d /sys/class/enclosure/$ENC ] ; then + # Not an enclosure, bail out + return + fi + + # Get the long sysfs device path to our enclosure. Looks like: + # /devices/pci0000:00/0000:00:03.0/0000:05:00.0/host0/port-0:0/ ... /enclosure/0:0:0:0 + + ENC_DEVICE=$(readlink /sys/class/enclosure/$ENC) + + # Grab the full path to the hosts port dir: + # /devices/pci0000:00/0000:00:03.0/0000:05:00.0/host0/port-0:0 + PORT_DIR=$(echo $ENC_DEVICE | grep -Eo '.+host[0-9]+/port-[0-9]+:[0-9]+') + + # Get the port number + PORT_ID=$(echo $PORT_DIR | grep -Eo "[0-9]+$") + + # The PCI directory is two directories up from the port directory + # /sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0 + PCI_ID_LONG=$(basename $(readlink -m "/sys/$PORT_DIR/../..")) + + # Strip down the PCI address from 0000:05:00.0 to 05:00.0 + PCI_ID=$(echo "$PCI_ID_LONG" | sed -r 's/^[0-9]+://g') + + # Name our device according to vdev_id.conf (like "L0" or "U1"). + NAME=$(awk "/channel/{if (\$1 == \"channel\" && \$2 == \"$PCI_ID\" && \ + \$3 == \"$PORT_ID\") {print \$4int(count[\$4])}; count[\$4]++}" $CONFIG) + + echo "${NAME}" +} + alias_handler () { # Special handling is needed to correctly append a -part suffix # to partitions of device mapper devices. The DEVTYPE attribute @@ -472,7 +512,7 @@ alias_handler () { done } -while getopts 'c:d:g:mp:h' OPTION; do +while getopts 'c:d:eg:mp:h' OPTION; do case ${OPTION} in c) CONFIG=${OPTARG} @@ -480,6 +520,16 @@ while getopts 'c:d:g:mp:h' OPTION; do d) DEV=${OPTARG} ;; + e) + # When udev sees a scsi_generic device, it calls this script with -e to + # create the enclosure device symlinks only. We also need + # "enclosure_symlinks yes" set in vdev_id.config to actually create the + # symlink. + ENCLOSURE_MODE=$(awk '{if ($1 == "enclosure_symlinks") print $2}' $CONFIG) + if [ "$ENCLOSURE_MODE" != "yes" ] ; then + exit 0 + fi + ;; g) TOPOLOGY=$OPTARG ;; @@ -499,7 +549,7 @@ if [ ! -r $CONFIG ] ; then exit 0 fi -if [ -z "$DEV" ] ; then +if [ -z "$DEV" -a -z "$ENCLOSURE_MODE" ] ; then echo "Error: missing required option -d" exit 1 fi @@ -512,12 +562,30 @@ if [ -z "$BAY" ] ; then BAY=`awk "\\$1 == \"slot\" {print \\$2; exit}" $CONFIG` fi +TOPOLOGY=${TOPOLOGY:-sas_direct} + +# Should we create /dev/by-enclosure symlinks? +if [ "$ENCLOSURE_MODE" = "yes" -a "$TOPOLOGY" = "sas_direct" ] ; then + ID_ENCLOSURE=$(enclosure_handler) + if [ -z "$ID_ENCLOSURE" ] ; then + exit 0 + fi + + # Just create the symlinks to the enclosure devices and then exit. + ENCLOSURE_PREFIX=$(awk '/enclosure_symlinks_prefix/{print $2}' $CONFIG) + if [ -z "$ENCLOSURE_PREFIX" ] ; then + ENCLOSURE_PREFIX="enc" + fi + echo "ID_ENCLOSURE=$ID_ENCLOSURE" + echo "ID_ENCLOSURE_PATH=by-enclosure/$ENCLOSURE_PREFIX-$ID_ENCLOSURE" + exit 0 +fi + # First check if an alias was defined for this device. ID_VDEV=`alias_handler` if [ -z "$ID_VDEV" ] ; then BAY=${BAY:-bay} - TOPOLOGY=${TOPOLOGY:-sas_direct} case $TOPOLOGY in sas_direct|sas_switch) ID_VDEV=`sas_handler` diff --git a/etc/zfs/vdev_id.conf.sas_direct.example b/etc/zfs/vdev_id.conf.sas_direct.example index 115ebd8d3..0a6f130cb 100644 --- a/etc/zfs/vdev_id.conf.sas_direct.example +++ b/etc/zfs/vdev_id.conf.sas_direct.example @@ -2,6 +2,9 @@ multipath no topology sas_direct phys_per_port 4 +# Additionally create /dev/by-enclousure/ symlinks for enclosure devices +enclosure_symlinks yes + # PCI_ID HBA PORT CHANNEL NAME channel 85:00.0 1 A channel 85:00.0 0 B diff --git a/man/man5/vdev_id.conf.5 b/man/man5/vdev_id.conf.5 index 50caa92c0..5b7fbf0ca 100644 --- a/man/man5/vdev_id.conf.5 +++ b/man/man5/vdev_id.conf.5 @@ -38,6 +38,19 @@ defined by udev. This may be an absolute path or the base filename. Maps a physical path to a channel name (typically representing a single disk enclosure). +.TP +\fIenclosure_symlinks\fR <yes|no> +Additionally create /dev/by-enclosure symlinks to the disk enclosure +sg devices using the naming scheme from from vdev_id.conf. +\fIenclosure_symlinks\fR is only allowed for sas_direct mode. +.TP +\fIenclosure_symlinks_prefix\fR <prefix> +Specify the prefix for the enclosure symlinks in the form of: + +/dev/by-enclosure/<prefix>-<channel><num> + +Defaults to "enc" if not specified. +.TP \fIpci_slot\fR - specifies the PCI SLOT of the HBA hosting the disk enclosure being mapped, as found in the output of .BR lspci (8). @@ -169,6 +182,27 @@ definitions - one per physical path. channel 86:00.0 0 B .fi .P +A configuration with enclosure_symlinks enabled. +.P +.nf + multipath yes + enclosure_symlinks yes + + # PCI_ID HBA PORT CHANNEL NAME + channel 05:00.0 1 U + channel 05:00.0 0 L + channel 06:00.0 1 U + channel 06:00.0 0 L +.fi +In addition to the disks symlinks, this configuration will create: +.P +.nf + /dev/by-enclosure/enc-L0 + /dev/by-enclosure/enc-L1 + /dev/by-enclosure/enc-U0 + /dev/by-enclosure/enc-U1 +.fi +.P A configuration using device link aliases. .P .nf diff --git a/udev/rules.d/69-vdev.rules.in b/udev/rules.d/69-vdev.rules.in index 2b9e5d600..36a1a8ed5 100644 --- a/udev/rules.d/69-vdev.rules.in +++ b/udev/rules.d/69-vdev.rules.in @@ -8,3 +8,7 @@ ENV{DEVTYPE}=="partition", IMPORT{program}="@udevdir@/vdev_id -d %k" KERNEL=="*[!0-9]", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}" KERNEL=="*[0-9]", ENV{SUBSYSTEM}=="block", ENV{DEVTYPE}=="partition", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}-part%n" KERNEL=="dm-[0-9]*", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}" + +# Enclosure device symlink rules +ENV{SUBSYSTEM}=="scsi_generic", IMPORT{program}="@udevdir@/vdev_id -e" +ENV{SUBSYSTEM}=="scsi_generic", ENV{ID_ENCLOSURE}=="?*", SYMLINK+="$env{ID_ENCLOSURE_PATH}" |