Revert "Fix issues with truncated files in raw sends"

This partially reverts commit 5dbf8b4ed.  This change resolved
the issues observed with truncated files in raw sends.  However,
the required changes to dnode_allocate() introduced a regression
for non-raw streams which needs to be understood.

The additional debugging improvements from the original patch
were not reverted.

Reviewed-by: Tom Caputi <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Issue #7378
Issue #8528
Issue #8540
Issue #8565
Close #8584

4 files changed, 32 insertions, 129 deletions

diff --git a/tests/runfiles/linux.run b/tests/runfiles/linux.run
index aee1ad9ea..d812da62e 100644
--- a/tests/runfiles/linux.run
+++ b/tests/runfiles/linux.run
@@ -803,8 +803,7 @@ tests = ['rsend_001_pos', 'rsend_002_pos', 'rsend_003_pos', 'rsend_004_pos',
     'send-c_lz4_disabled', 'send-c_recv_lz4_disabled',
     'send-c_mixed_compression', 'send-c_stream_size_estimate', 'send-cD',
     'send-c_embedded_blocks', 'send-c_resume', 'send-cpL_varied_recsize',
-    'send-c_recv_dedup', 'send_encrypted_files',
-    'send_encrypted_truncated_files', 'send_encrypted_heirarchy',
+    'send-c_recv_dedup', 'send_encrypted_files', 'send_encrypted_heirarchy',
     'send_encrypted_props', 'send_freeobjects', 'send_realloc_dnode_size',
     'send_holds', 'send_hole_birth', 'send_mixed_raw',
     'send-wDR_encrypted_zvol']
diff --git a/tests/zfs-tests/tests/functional/rsend/Makefile.am b/tests/zfs-tests/tests/functional/rsend/Makefile.am
index 322f1521f..b0c68c5be 100644
--- a/tests/zfs-tests/tests/functional/rsend/Makefile.am
+++ b/tests/zfs-tests/tests/functional/rsend/Makefile.am
@@ -22,7 +22,6 @@ dist_pkgdata_SCRIPTS = \
 	rsend_022_pos.ksh \
 	rsend_024_pos.ksh \
 	send_encrypted_files.ksh \
-	send_encrypted_truncated_files.ksh \
 	send_encrypted_heirarchy.ksh \
 	send_encrypted_props.ksh \
 	send-cD.ksh \
diff --git a/tests/zfs-tests/tests/functional/rsend/send_encrypted_files.ksh b/tests/zfs-tests/tests/functional/rsend/send_encrypted_files.ksh
index 0156bc589..d981aa3fd 100755
--- a/tests/zfs-tests/tests/functional/rsend/send_encrypted_files.ksh
+++ b/tests/zfs-tests/tests/functional/rsend/send_encrypted_files.ksh
@@ -22,8 +22,7 @@
 
 #
 # DESCRIPTION:
-# Verify that a raw zfs send and receive can deal with several different
-# types of file layouts.
+#
 #
 # STRATEGY:
 # 1. Create a new encrypted filesystem
@@ -31,14 +30,18 @@
 # 3. Add a small 512 byte file to the filesystem
 # 4. Add a larger 32M file to the filesystem
 # 5. Add a large sparse file to the filesystem
-# 6. Add 1000 empty files to the filesystem
-# 7. Add a file with a large xattr value
-# 8. Use xattrtest to create files with random xattrs (with and without xattrs=on)
-# 9. Take a snapshot of the filesystem
-# 10. Remove the 1000 empty files to the filesystem
-# 11. Take another snapshot of the filesystem
-# 12. Send and receive both snapshots
-# 13. Mount the filesystem and check the contents
+# 6. Add a 3 files that are to be truncated later
+# 7. Add 1000 empty files to the filesystem
+# 8. Add a file with a large xattr value
+# 9. Use xattrtest to create files with random xattrs (with and without xattrs=on)
+# 10. Take a snapshot of the filesystem
+# 11. Truncate one of the files from 32M to 128k
+# 12. Truncate one of the files from 512k to 384k
+# 13. Truncate one of the files from 512k to 0 to 384k
+# 14. Remove the 1000 empty files to the filesystem
+# 15. Take another snapshot of the filesystem
+# 16. Send and receive both snapshots
+# 17. Mount the filesystem and check the contents
 #
 
 verify_runnable "both"
@@ -71,12 +74,15 @@ log_must eval "echo 'password' > $keyfile"
 log_must zfs create -o encryption=on -o keyformat=passphrase \
 	-o keylocation=file://$keyfile $TESTPOOL/$TESTFS2
 
-# Create files with varied layouts on disk
+# Create files with vaired layouts on disk
 log_must touch /$TESTPOOL/$TESTFS2/empty
 log_must mkfile 512 /$TESTPOOL/$TESTFS2/small
 log_must mkfile 32M /$TESTPOOL/$TESTFS2/full
 log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS2/sparse \
 	bs=512 count=1 seek=1048576 >/dev/null 2>&1
+log_must mkfile 32M /$TESTPOOL/$TESTFS2/truncated
+log_must mkfile 524288 /$TESTPOOL/$TESTFS2/truncated2
+log_must mkfile 524288 /$TESTPOOL/$TESTFS2/truncated3
 
 log_must mkdir -p /$TESTPOOL/$TESTFS2/dir
 for i in {1..1000}; do
@@ -95,10 +101,23 @@ log_must zfs set compression=on xattr=sa $TESTPOOL/$TESTFS2
 log_must touch /$TESTPOOL/$TESTFS2/attrs
 log_must eval "python -c 'print \"a\" * 4096' | \
 	attr -s bigval /$TESTPOOL/$TESTFS2/attrs"
-log_must zfs set compression=off xattr=on $TESTPOOL/$TESTFS2
 
 log_must zfs snapshot $TESTPOOL/$TESTFS2@snap1
 
+#
+# Truncate files created in the first snapshot. The first tests
+# truncating a large file to a single block. The second tests
+# truncating one block off the end of a file without changing
+# the required nlevels to hold it. The last tests handling
+# of a maxblkid that is dropped and then raised again.
+#
+log_must truncate -s 131072 /$TESTPOOL/$TESTFS2/truncated
+log_must truncate -s 393216 /$TESTPOOL/$TESTFS2/truncated2
+log_must truncate -s 0 /$TESTPOOL/$TESTFS2/truncated3
+log_must zpool sync $TESTPOOL
+log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS2/truncated3 \
+	bs=128k count=3 iflag=fullblock
+
 # Remove the empty files created in the first snapshot
 for i in {1..1000}; do
 	log_must rm /$TESTPOOL/$TESTFS2/dir/file-$i
diff --git a/tests/zfs-tests/tests/functional/rsend/send_encrypted_truncated_files.ksh b/tests/zfs-tests/tests/functional/rsend/send_encrypted_truncated_files.ksh
deleted file mode 100755
index 8578d5768..000000000
--- a/tests/zfs-tests/tests/functional/rsend/send_encrypted_truncated_files.ksh
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/bin/ksh -p
-#
-# CDDL HEADER START
-#
-# This file and its contents are supplied under the terms of the
-# Common Development and Distribution License ("CDDL"), version 1.0.
-# You may only use this file in accordance with the terms of version
-# 1.0 of the CDDL.
-#
-# A full copy of the text of the CDDL should have accompanied this
-# source.  A copy of the CDDL is also available via the Internet at
-# http://www.illumos.org/license/CDDL.
-#
-# CDDL HEADER END
-#
-
-#
-# Copyright (c) 2018 by Datto Inc. All rights reserved.
-#
-
-. $STF_SUITE/tests/functional/rsend/rsend.kshlib
-
-#
-# DESCRIPTION:
-#
-#
-# STRATEGY:
-# 1. Create a new encrypted filesystem
-# 2. Add a 4 files that are to be truncated later
-# 3. Take a snapshot of the filesystem
-# 4. Truncate one of the files from 32M to 128k
-# 5. Truncate one of the files from 512k to 384k
-# 6. Truncate one of the files from 512k to 0 to 384k via reallocation
-# 7. Truncate one of the files from 1k to 0 to 512b via reallocation
-# 8. Take another snapshot of the filesystem
-# 9. Send and receive both snapshots
-# 10. Mount the filesystem and check the contents
-#
-
-verify_runnable "both"
-
-function cleanup
-{
-	datasetexists $TESTPOOL/$TESTFS2 && \
-		log_must zfs destroy -r $TESTPOOL/$TESTFS2
-	datasetexists $TESTPOOL/recv && \
-		log_must zfs destroy -r $TESTPOOL/recv
-	[[ -f $keyfile ]] && log_must rm $keyfile
-	[[ -f $sendfile ]] && log_must rm $sendfile
-}
-log_onexit cleanup
-
-function recursive_cksum
-{
-	find $1 -type f -exec sha256sum {} \; | \
-		sort -k 2 | awk '{ print $1 }' | sha256sum
-}
-
-log_assert "Verify 'zfs send -w' works with many different file layouts"
-
-typeset keyfile=/$TESTPOOL/pkey
-typeset sendfile=/$TESTPOOL/sendfile
-typeset sendfile2=/$TESTPOOL/sendfile2
-
-# Create an encrypted dataset
-log_must eval "echo 'password' > $keyfile"
-log_must zfs create -o encryption=on -o keyformat=passphrase \
-	-o keylocation=file://$keyfile $TESTPOOL/$TESTFS2
-
-# Create files with varied layouts on disk
-log_must mkfile 32M /$TESTPOOL/$TESTFS2/truncated
-log_must mkfile 524288 /$TESTPOOL/$TESTFS2/truncated2
-log_must mkfile 524288 /$TESTPOOL/$TESTFS2/truncated3
-log_must mkfile 1024 /$TESTPOOL/$TESTFS2/truncated4
-
-log_must zfs snapshot $TESTPOOL/$TESTFS2@snap1
-
-#
-# Truncate files created in the first snapshot. The first tests
-# truncating a large file to a single block. The second tests
-# truncating one block off the end of a file without changing
-# the required nlevels to hold it. The third tests handling
-# of a maxblkid that is dropped and then raised again. The
-# fourth tests an object that is truncated from a single block
-# to a smaller single block.
-#
-log_must truncate -s 131072 /$TESTPOOL/$TESTFS2/truncated
-log_must truncate -s 393216 /$TESTPOOL/$TESTFS2/truncated2
-log_must rm -f /$TESTPOOL/$TESTFS2/truncated3
-log_must rm -f /$TESTPOOL/$TESTFS2/truncated4
-log_must zpool sync $TESTPOOL
-log_must zfs umount $TESTPOOL/$TESTFS2
-log_must zfs mount $TESTPOOL/$TESTFS2
-log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS2/truncated3 \
-	bs=128k count=3 iflag=fullblock
-log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS2/truncated4 \
-	bs=512 count=1 iflag=fullblock
-
-log_must zfs snapshot $TESTPOOL/$TESTFS2@snap2
-expected_cksum=$(recursive_cksum /$TESTPOOL/$TESTFS2)
-
-log_must eval "zfs send -wp $TESTPOOL/$TESTFS2@snap1 > $sendfile"
-log_must eval "zfs send -wp -i @snap1 $TESTPOOL/$TESTFS2@snap2 > $sendfile2"
-
-log_must eval "zfs recv -F $TESTPOOL/recv < $sendfile"
-log_must eval "zfs recv -F $TESTPOOL/recv < $sendfile2"
-log_must zfs load-key $TESTPOOL/recv
-
-log_must zfs mount -a
-actual_cksum=$(recursive_cksum /$TESTPOOL/recv)
-[[ "$expected_cksum" != "$actual_cksum" ]] && \
-	log_fail "Recursive checksums differ ($expected_cksum != $actual_cksum)"
-
-log_pass "Verified 'zfs send -w' works with many different file layouts"