Fix typos in tests/

Reviewed-by: Ryan Moeller <[email protected]>
Reviewed-by: Richard Laager <[email protected]>
Reviewed-by: Brian Behlendorf <[email protected]>
Signed-off-by: Andrea Gelmini <[email protected]>
Closes #9249 

15 files changed, 22 insertions, 22 deletions

diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_016_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_016_pos.ksh
index 83cd0a27c..1e129ddd3 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_016_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_016_pos.ksh
@@ -157,7 +157,7 @@ verify_snapshots 1
 
 snaps="1 2 3 4 5"
 setup_snapshots
-log_note "Snapshot destory with hold"
+log_note "Snapshot destroy with hold"
 range="1 2 3 4 5"
 for i in 1 2 3 4 5; do
 	log_must zfs hold keep $TESTPOOL/$TESTFS1@snap$i
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_clone_livelist.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_clone_livelist.ksh
index 6669426b0..c427e4bc4 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_clone_livelist.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_clone_livelist.ksh
@@ -30,7 +30,7 @@
 #	  destroyed
 # 3. Multiple clones with empty livelists
 #	- same as 1. but with multiple clones
-# 4. Multuple clones with populated livelists
+# 4. Multiple clones with populated livelists
 #	- same as 2. but with multiple clones
 
 . $STF_SUITE/include/libtest.shlib
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_common.kshlib b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_common.kshlib
index 895efaf98..504e3a580 100644
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_common.kshlib
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_common.kshlib
@@ -56,7 +56,7 @@ function setup_testenv #[dtst]
 	if ! datasetexists $FS; then
 		log_must zfs create $FS
 	fi
-	# Volume test is only availible on globle zone
+	# Volume test is only available on global zone
 	if ! datasetexists $VOL && is_global_zone; then
 		log_must zfs create -V $VOLSIZE $VOL
 		block_device_wait
@@ -127,7 +127,7 @@ function check_dataset
 	shift
 
 	for dtst in "$@"; do
-		# Volume and related stuff are unvailable in local zone
+		# Volume and related stuff are unavailable in local zone
 		if ! is_global_zone; then
 			if [[ $dtst == $VOL || $dtst == $VOLSNAP || \
 				$dtst == $VOLCLONE ]]
@@ -140,7 +140,7 @@ function check_dataset
 
 	if (( ${#newlist} != 0 )); then
 		# Run each item in $newlist individually so on failure, the
-		# probelmatic dataset is listed in the logs.
+		# problematic dataset is listed in the logs.
 		for i in $newlist; do
 			log_must $funname $i
 		done
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_dev_removal_condense.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_dev_removal_condense.ksh
index 30c4b2dda..b6442de40 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_dev_removal_condense.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_dev_removal_condense.ksh
@@ -61,7 +61,7 @@ log_must zfs snapshot $TESTPOOL2/$TESTFS@snap
 
 log_must zfs clone $TESTPOOL2/$TESTFS@snap $TESTPOOL2/$TESTCLONE
 
-# Create inital files and pause condense zthr on next execution
+# Create initial files and pause condense zthr on next execution
 log_must mkfile 10m /$TESTPOOL2/$TESTCLONE/A
 log_must mkfile 1m /$TESTPOOL2/$TESTCLONE/B
 log_must zpool sync $TESTPOOL2
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_get/zfs_get_004_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_get/zfs_get_004_pos.ksh
index b038e7484..4bd61137c 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_get/zfs_get_004_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_get/zfs_get_004_pos.ksh
@@ -114,7 +114,7 @@ availspace=$(get_prop available $TESTPOOL)
 typeset -i i=0
 
 # make sure 'availspace' is larger then twice of FILESIZE to create a new pool.
-# If any, we only totally create 3 pools for multple datasets testing to limit
+# If any, we only totally create 3 pools for multiple datasets testing to limit
 # testing time
 while (( availspace > DFILESIZE )) && (( i < 3 )) ; do
 	(( i += 1 ))
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_002_neg.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_002_neg.ksh
index 584039f54..3ef65b517 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_002_neg.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_002_neg.ksh
@@ -36,8 +36,8 @@
 # 'zfs inherit' should return an error with bad parameters in one command.
 #
 # STRATEGY:
-# 1. Set an array of bad options and invlid properties to 'zfs inherit'
-# 2. Execute 'zfs inherit' with bad options and passing invlid properties
+# 1. Set an array of bad options and invalid properties to 'zfs inherit'
+# 2. Execute 'zfs inherit' with bad options and passing invalid properties
 # 3. Verify an error is returned.
 #
 
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_003_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_003_pos.ksh
index bc0d8c59c..3317b09e2 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_003_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_inherit/zfs_inherit_003_pos.ksh
@@ -37,8 +37,8 @@
 # 'zfs inherit' should return an error with bad parameters in one command.
 #
 # STRATEGY:
-# 1. Set an array of bad options and invlid properties to 'zfs inherit'
-# 2. Execute 'zfs inherit' with bad options and passing invlid properties
+# 1. Set an array of bad options and invalid properties to 'zfs inherit'
+# 2. Execute 'zfs inherit' with bad options and passing invalid properties
 # 3. Verify an error is returned.
 #
 
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_007_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_007_pos.ksh
index e2ef0bf00..52ae1879d 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_007_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_007_pos.ksh
@@ -45,7 +45,7 @@
 #	  setuid		setuid/nosetuid
 #
 # STRATEGY:
-#	1. Create filesystem and get origianl property value.
+#	1. Create filesystem and get original property value.
 #	2. Using 'zfs mount -o' to set filesystem property.
 #	3. Verify the property was set temporarily.
 #	4. Verify it will not affect the property that is stored on disk.
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_008_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_008_pos.ksh
index 5f88b6110..84835a0d6 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_008_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_008_pos.ksh
@@ -83,7 +83,7 @@ log_must mkfile 1M $mntpnt/$TESTFILE2
 log_mustnot ls $testfile
 log_must ls $mntpnt/$TESTFILE1 $mntpnt/$TESTFILE2
 
-# Verify $TESTFILE2 was created in $fs1, rather then $fs
+# Verify $TESTFILE2 was created in $fs1, rather than $fs
 log_must zfs unmount $fs1
 log_must zfs set mountpoint=$mntpnt1 $fs1
 log_must zfs mount $fs1
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_010_neg.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_010_neg.ksh
index 963ad626c..0b5d61f62 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_010_neg.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_010_neg.ksh
@@ -72,4 +72,4 @@ else
 fi
 cd $curpath
 
-log_pass "zfs mount fails with mounted filesystem or busy moutpoint as expected."
+log_pass "zfs mount fails with mounted filesystem or busy mountpoint as expected."
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_remount.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_remount.ksh
index f7a097835..66a433865 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_remount.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_mount/zfs_mount_remount.ksh
@@ -29,7 +29,7 @@
 
 #
 # DESCRIPTION:
-# Verify remount functionality, expecially on readonly objects.
+# Verify remount functionality, especially on readonly objects.
 #
 # STRATEGY:
 # 1. Prepare a filesystem and a snapshot
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_property/zfs_written_property_001_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_property/zfs_written_property_001_pos.ksh
index bf94274dd..9a2d3cb80 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_property/zfs_written_property_001_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_property/zfs_written_property_001_pos.ksh
@@ -17,7 +17,7 @@
 #
 # DESCRIPTION
 # Verify that "zfs list" gives correct values for written and written@
-# proerties for the dataset when different operations are on done on it
+# properties for the dataset when different operations are on done on it
 #
 #
 # STRATEGY
@@ -86,7 +86,7 @@ blocks=0
 for i in 1 2 3; do
 	written=$(get_prop written $TESTPOOL/$TESTFS1@snap$i)
 	if [[ $blocks -eq 0 ]]; then
-		# Written value for the frist non-clone snapshot is
+		# Written value for the first non-clone snapshot is
 		# expected to be equal to the referenced value.
 		expected_written=$( \
 		    get_prop referenced $TESTPOOL/$TESTFS1@snap$i)
@@ -120,7 +120,7 @@ sync_pool
 written=$(get_prop written $TESTPOOL/$TESTFS1)
 writtenat3=$(get_prop written@snap3 $TESTPOOL/$TESTFS1)
 [[ $written -eq $writtenat3 ]] || \
-    log_fail "Written and written@ dont match $written $writtenat3"
+    log_fail "Written and written@ don't match $written $writtenat3"
 within_percent $written $before_written 0.1 && \
     log_fail "Unexpected written value after delete $written $before_written"
 writtenat=$(get_prop written@snap1 $TESTPOOL/$TESTFS1)
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_001_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_001_pos.ksh
index 5ce0e02fa..f8439dcbb 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_001_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_001_pos.ksh
@@ -155,7 +155,7 @@ for orig_fs in $datasets ; do
 
 	log_must zfs destroy -Rf $rst_fs
 
-	log_note "Verfiying 'zfs receive -d <filesystem>' works."
+	log_note "Verifying 'zfs receive -d <filesystem>' works."
 
 	i=0
 	while (( i < ${#bkup[*]} )); do
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_004_neg.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_004_neg.ksh
index fcbdc5e15..3a9c2279a 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_004_neg.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_004_neg.ksh
@@ -36,7 +36,7 @@
 #	Verify 'zfs receive' fails with malformed parameters.
 #
 # STRATEGY:
-#	1. Denfine malformed parameters array
+#	1. Define malformed parameters array
 #	2. Feed the malformed parameters to 'zfs receive'
 #	3. Verify the command should be failed
 #
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_from_encrypted.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_from_encrypted.ksh
index 5eee9eecf..de771ccf3 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_from_encrypted.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_from_encrypted.ksh
@@ -31,9 +31,9 @@
 # 4. Snapshot the encrypted dataset
 # 5. Attempt to receive the snapshot into an unencrypted child
 # 6. Verify encryption is not enabled
-# 7. Verify the cheksum of the file is the same as the original
+# 7. Verify the checksum of the file is the same as the original
 # 8. Attempt to receive the snapshot into an encrypted child
-# 9. Verify the cheksum of the file is the same as the original
+# 9. Verify the checksum of the file is the same as the original
 #
 
 verify_runnable "both"