Fix various typos

Correct an assortment of typos throughout the code base.

Reviewed-by: Brian Behlendorf <[email protected]>
Reviewed-by: Matthew Ahrens <[email protected]>
Reviewed-by: Ryan Moeller <[email protected]>
Signed-off-by: Andrea Gelmini <[email protected]>
Closes #11774

14 files changed, 21 insertions, 21 deletions

diff --git a/tests/zfs-tests/cmd/draid/draid.c b/tests/zfs-tests/cmd/draid/draid.c
index 861c6ba1a..57261348b 100644
--- a/tests/zfs-tests/cmd/draid/draid.c
+++ b/tests/zfs-tests/cmd/draid/draid.c
@@ -626,7 +626,7 @@ eval_decluster(draid_map_t *map, double *worst_ratiop, double *avg_ratiop)
 		uint64_t faults = nspares;
 
 		/*
-		 * Score groupwidths up to 19.  This value was choosen as the
+		 * Score groupwidths up to 19.  This value was chosen as the
 		 * largest reasonable width (16d+3p).  dRAID pools may be still
 		 * be created with wider stripes but they are not considered in
 		 * this analysis in order to optimize for the most common cases.
@@ -727,7 +727,7 @@ eval_maps(uint64_t children, int passes, uint64_t *map_seed,
 		 * Consider maps with a lower worst_ratio to be of higher
 		 * quality.  Some maps may have a lower avg_ratio but they
 		 * are discarded since they might include some particularly
-		 * imbalanced permuations.  The average is tracked to in
+		 * imbalanced permutations.  The average is tracked to in
 		 * order to get a sense of the average permutation quality.
 		 */
 		eval_decluster(map, &worst_ratio, &avg_ratio);
@@ -1194,8 +1194,8 @@ draid_dump(int argc, char *argv[])
 }
 
 /*
- * Print all of the mappings as a C formated draid_map_t array.  This table
- * is found in the module/zcommon/zfs_draid.c file and is the definative
+ * Print all of the mappings as a C formatted draid_map_t array.  This table
+ * is found in the module/zcommon/zfs_draid.c file and is the definitive
  * source for all mapping used by dRAID.  It cannot be updated without
  * changing the dRAID on disk format.
  */
diff --git a/tests/zfs-tests/cmd/file_write/file_write.c b/tests/zfs-tests/cmd/file_write/file_write.c
index 45d296db4..60893c34f 100644
--- a/tests/zfs-tests/cmd/file_write/file_write.c
+++ b/tests/zfs-tests/cmd/file_write/file_write.c
@@ -44,7 +44,7 @@ static unsigned char bigbuffer[BIGBUFFERSIZE];
 static void usage(char *);
 
 /*
- * psudo-randomize the buffer
+ * pseudo-randomize the buffer
  */
 static void randomize_buffer(int block_size) {
 	int i;
diff --git a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_015_pos.ksh b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_015_pos.ksh
index f399ad270..fb29e4acd 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_015_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zfs_destroy/zfs_destroy_015_pos.ksh
@@ -19,7 +19,7 @@
 #	snapshots from the same datasets
 #
 # STRATEGY
-#	1. Create multiple snapshots for the same datset
+#	1. Create multiple snapshots for the same dataset
 #	2. Run zfs destroy for these snapshots for a mix of valid and
 #	   invalid snapshot names
 #	3. Run zfs destroy for snapshots from different datasets and
diff --git a/tests/zfs-tests/tests/functional/cli_root/zpool_add/zpool_add_dryrun_output.ksh b/tests/zfs-tests/tests/functional/cli_root/zpool_add/zpool_add_dryrun_output.ksh
index dbf81262e..73dec9240 100755
--- a/tests/zfs-tests/tests/functional/cli_root/zpool_add/zpool_add_dryrun_output.ksh
+++ b/tests/zfs-tests/tests/functional/cli_root/zpool_add/zpool_add_dryrun_output.ksh
@@ -36,7 +36,7 @@ typeset VDEV_PREFIX="$TEST_BASE_DIR/filedev"
 # STRATEGY:
 # 1. Create different storage pools, use -n to add devices to the pool and
 #    verify the output is as expected.
-# 2. Create a pool whith a hole vdev and verify it's not listed with add -n.
+# 2. Create a pool with a hole vdev and verify it's not listed with add -n.
 #
 
 typeset -a dev=(
@@ -163,7 +163,7 @@ for (( i=0; i < ${#tests[@]}; i+=1 )); do
 	log_must destroy_pool "$TESTPOOL"
 done
 
-# Make sure hole vdevs are skiped in output.
+# Make sure hole vdevs are skipped in output.
 log_must eval "zpool create '$TESTPOOL' '${dev[0]}' log '${dev[1]}' \
     cache '${dev[2]}'"
 
diff --git a/tests/zfs-tests/tests/functional/cli_user/zfs_list/zfs_list_002_pos.ksh b/tests/zfs-tests/tests/functional/cli_user/zfs_list/zfs_list_002_pos.ksh
index 382b2cb7f..4951097ac 100755
--- a/tests/zfs-tests/tests/functional/cli_user/zfs_list/zfs_list_002_pos.ksh
+++ b/tests/zfs-tests/tests/functional/cli_user/zfs_list/zfs_list_002_pos.ksh
@@ -74,7 +74,7 @@ else
 fi
 
 #
-# datsets ordered by checksum options (note, Orange, Carrot & Banana have the
+# datasets ordered by checksum options (note, Orange, Carrot & Banana have the
 # same checksum options, so ZFS should revert to sorting them alphabetically by
 # name)
 #
diff --git a/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_homedir.ksh b/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_homedir.ksh
index 5cb50fde6..22450d89d 100755
--- a/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_homedir.ksh
+++ b/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_homedir.ksh
@@ -30,7 +30,7 @@
 #
 # STRATEGY:
 #	1. Change HOME to /var/tmp
-#	2. Make a simple script that echos a key value pair
+#	2. Make a simple script that echoes a key value pair
 #	   in /var/tmp/.zpool.d
 #	3. Make sure it can be run with -c
 #	4. Remove the script we created
diff --git a/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_searchpath.ksh b/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_searchpath.ksh
index 1197ea2d1..11f51350a 100755
--- a/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_searchpath.ksh
+++ b/tests/zfs-tests/tests/functional/cli_user/zpool_iostat/zpool_iostat_-c_searchpath.ksh
@@ -30,7 +30,7 @@
 #
 # STRATEGY:
 #	1. Set ZPOOL_SCRIPTS_PATH to contain a couple of non-default dirs
-#	2. Make a simple script that echos a key value pair in each dir
+#	2. Make a simple script that echoes a key value pair in each dir
 #	3. Make sure scripts can be run with -c
 #	4. Remove the scripts we created
 
diff --git a/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_homedir.ksh b/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_homedir.ksh
index 4cc3deb6d..5363043a8 100755
--- a/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_homedir.ksh
+++ b/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_homedir.ksh
@@ -30,7 +30,7 @@
 #
 # STRATEGY:
 #	1. Change HOME to /var/tmp
-#	2. Make a simple script that echos a key value pair
+#	2. Make a simple script that echoes a key value pair
 #	   in /var/tmp/.zpool.d
 #	3. Make sure it can be run with -c
 #	4. Remove the script we created
diff --git a/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_searchpath.ksh b/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_searchpath.ksh
index a075b9a0c..3f64fdf1a 100755
--- a/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_searchpath.ksh
+++ b/tests/zfs-tests/tests/functional/cli_user/zpool_status/zpool_status_-c_searchpath.ksh
@@ -30,7 +30,7 @@
 #
 # STRATEGY:
 #	1. Set ZPOOL_SCRIPTS_PATH to contain a couple of non-default dirs
-#	2. Make a simple script that echos a key value pair in each dir
+#	2. Make a simple script that echoes a key value pair in each dir
 #	3. Make sure scripts can be run with -c
 #	4. Remove the scripts we created
 
diff --git a/tests/zfs-tests/tests/functional/fault/auto_offline_001_pos.ksh b/tests/zfs-tests/tests/functional/fault/auto_offline_001_pos.ksh
index 0abe1e2ce..86916bf90 100755
--- a/tests/zfs-tests/tests/functional/fault/auto_offline_001_pos.ksh
+++ b/tests/zfs-tests/tests/functional/fault/auto_offline_001_pos.ksh
@@ -30,7 +30,7 @@
 # STRATEGY:
 # 1. Create a pool
 # 2. Simulate physical removal of one device
-# 3. Verify the device is unvailable
+# 3. Verify the device is unavailable
 # 4. Reattach the device
 # 5. Verify the device is onlined
 # 6. Repeat the same tests with a spare device:
@@ -104,7 +104,7 @@ do
 	log_must mkfile 1m $mntpnt/file
 	log_must zpool sync $TESTPOOL
 
-	# 3. Verify the device is unvailable.
+	# 3. Verify the device is unavailable.
 	log_must wait_vdev_state $TESTPOOL $removedev "UNAVAIL"
 
 	# 4. Reattach the device
diff --git a/tests/zfs-tests/tests/functional/replacement/attach_multiple.ksh b/tests/zfs-tests/tests/functional/replacement/attach_multiple.ksh
index b3192b2bf..5c3835349 100755
--- a/tests/zfs-tests/tests/functional/replacement/attach_multiple.ksh
+++ b/tests/zfs-tests/tests/functional/replacement/attach_multiple.ksh
@@ -44,7 +44,7 @@ function cleanup
 	rm -f ${VDEV_FILES[@]}
 }
 
-log_assert "Verify attach/detech with multiple vdevs"
+log_assert "Verify attach/detach with multiple vdevs"
 
 ORIG_SCAN_SUSPEND_PROGRESS=$(get_tunable SCAN_SUSPEND_PROGRESS)
 
@@ -79,7 +79,7 @@ for replace_mode in "healing" "sequential"; do
 	    ${VDEV_FILES[1]} ${VDEV_FILES[2]}
 	log_must is_pool_resilvering $TESTPOOL1
 
-	# Original vdev cannot be detached until there is sufficent redundancy.
+	# Original vdev cannot be detached until there is sufficient redundancy.
 	log_mustnot zpool detach $TESTPOOL1 ${VDEV_FILES[0]}
 
 	# Detach first vdev (resilver keeps running)
@@ -108,4 +108,4 @@ for replace_mode in "healing" "sequential"; do
 	log_must zpool wait $TESTPOOL1
 done
 
-log_pass "Verify attach/detech with multiple vdevs"
+log_pass "Verify attach/detach with multiple vdevs"
diff --git a/tests/zfs-tests/tests/functional/replacement/replace_import.ksh b/tests/zfs-tests/tests/functional/replacement/replace_import.ksh
index 35d51d939..37d3c6645 100755
--- a/tests/zfs-tests/tests/functional/replacement/replace_import.ksh
+++ b/tests/zfs-tests/tests/functional/replacement/replace_import.ksh
@@ -26,7 +26,7 @@
 # Strategy:
 # 1. For both healing and sequential resilvering replace:
 #    a. Create a pool
-#    b. Repalce a vdev with 'zpool replace' to resilver (-s) it.
+#    b. Replace a vdev with 'zpool replace' to resilver (-s) it.
 #    c. Export the pool
 #    d. Import the pool
 #    e. Verify the 'zpool replace' resumed resilvering.
diff --git a/tests/zfs-tests/tests/functional/replacement/resilver_restart_001.ksh b/tests/zfs-tests/tests/functional/replacement/resilver_restart_001.ksh
index 7896b2dbe..7e96ab518 100755
--- a/tests/zfs-tests/tests/functional/replacement/resilver_restart_001.ksh
+++ b/tests/zfs-tests/tests/functional/replacement/resilver_restart_001.ksh
@@ -36,7 +36,7 @@
 #    a. Replace a vdev with a spare & suspend resilver immediately
 #    b. Verify resilver starts properly
 #    c. Offline / online another vdev to introduce a new DTL range
-#    d. Verify resilver restart restart or defer
+#    d. Verify resilver restart or defer
 #    e. Inject read errors on vdev that was offlined / onlned
 #    f. Verify that resilver did not restart
 #    g. Unsuspend resilver and wait for it to finish
diff --git a/tests/zfs-tests/tests/functional/reservation/reservation_006_pos.ksh b/tests/zfs-tests/tests/functional/reservation/reservation_006_pos.ksh
index ec1986c45..da0d36a35 100755
--- a/tests/zfs-tests/tests/functional/reservation/reservation_006_pos.ksh
+++ b/tests/zfs-tests/tests/functional/reservation/reservation_006_pos.ksh
@@ -39,7 +39,7 @@
 # for a dataset. Unlike quotas however there should be no restrictions
 # on accessing space outside of the limits of the reservation (if the
 # space is available in the pool). Verify that in a filesystem with a
-# reservation set that its possible to create files both within the
+# reservation set that it's possible to create files both within the
 # reserved space and also outside.
 #
 # STRATEGY: