Add zpool events tests

* events_001_pos - Verify the expected events are generated when
  invoking the various zpool sub-commands.  These events must
  appear in `zpool event` and be consumed by the ZED.

* events_002_pos - Verify the ZED consumes events which were
  generated while it wasn't running when it is started.
  Additionally, verify that events are only processed once.

As part of this change the default.cfg used by the test suite
was changed to a default.cfg.in file.  This was needed so the
install location of all zed scripts, not only the enabled ones,
could be reliably determined.

Signed-off-by: Brian Behlendorf <[email protected]>
Closes #6128

1 files changed, 201 insertions, 0 deletions

diff --git a/tests/zfs-tests/include/default.cfg.in b/tests/zfs-tests/include/default.cfg.in
new file mode 100644
index 000000000..9ac74f29c
--- /dev/null
+++ b/tests/zfs-tests/include/default.cfg.in
@@ -0,0 +1,201 @@
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
+# Use is subject to license terms.
+#
+
+#
+# Copyright (c) 2016 by Delphix. All rights reserved.
+# Copyright (c) 2017 Lawrence Livermore National Security, LLC.
+#
+
+. $STF_SUITE/include/commands.cfg
+. $STF_SUITE/include/libtest.shlib
+
+# ZFS Directories
+export prefix=@prefix@
+export exec_prefix=@exec_prefix@
+export ZEDLET_ETC_DIR=${ZEDLET_ETC_DIR:-@sysconfdir@/zfs/zed.d}
+export ZEDLET_LIBEXEC_DIR=${ZEDLET_LIBEXEC_DIR:-@libexecdir@/zfs/zed.d}
+export ZPOOL_SCRIPT_DIR=${ZPOOL_SCRIPT_DIR:-@sysconfdir@/zfs/zpool.d}
+
+# Define run length constants
+export RT_LONG="3"
+export RT_MEDIUM="2"
+export RT_SHORT="1"
+
+# Define macro for zone test
+export ZONE_POOL="zonepool"
+export ZONE_CTR="zonectr"
+
+# ensure we're running in the C locale, since
+# localised messages may result in test failures
+export LC_ALL="C"
+export LANG="C"
+
+#
+# pattern to ignore from 'zpool list'.
+#
+export NO_POOLS="no pools available"
+
+# pattern to ignore from 'zfs list'.
+export NO_DATASETS="no datasets available"
+
+export TEST_BASE_DIR="/var/tmp"
+
+# Default to compression ON
+export COMPRESSION_PROP=on
+
+# Default to using the checksum
+export CHECKSUM_PROP=on
+
+# some common variables used by test scripts :
+export FIO_SCRIPTS=$STF_SUITE/tests/perf/fio
+export PERF_SCRIPTS=$STF_SUITE/tests/perf/scripts
+
+# some test pool names
+export TESTPOOL=testpool
+export TESTPOOL1=testpool1
+export TESTPOOL2=testpool2
+export TESTPOOL3=testpool3
+export PERFPOOL=perfpool
+
+# some test file system names
+export TESTFS=testfs
+export TESTFS1=testfs1
+export TESTFS2=testfs2
+export TESTFS3=testfs3
+
+# some test directory names
+export TESTDIR=${TEST_BASE_DIR%%/}/testdir
+export TESTDIR0=${TEST_BASE_DIR%%/}/testdir0
+export TESTDIR1=${TEST_BASE_DIR%%/}/testdir1
+export TESTDIR2=${TEST_BASE_DIR%%/}/testdir2
+
+# some test sub file system names
+export TESTSUBFS=subfs
+export TESTSUBFS1=subfs1
+export TESTSUBFS2=subfs2
+
+# some temp files
+export TEMPFILE=${TEST_BASE_DIR%%/}/tempfile$$
+export TEMPFILE0=${TEST_BASE_DIR%%/}/tempfile0$$
+export TEMPFILE1=${TEST_BASE_DIR%%/}/tempfile1$$
+export TEMPFILE2=${TEST_BASE_DIR%%/}/tempfile2$$
+
+export ZFSROOT=
+
+export TESTSNAP=testsnap
+export TESTSNAP1=testsnap1
+export TESTSNAP2=testsnap2
+export TESTCLONE=testclone
+export TESTCLONE1=testclone1
+export TESTCLONE2=testclone2
+export TESTCLCT=testclct
+export TESTCTR=testctr
+export TESTCTR1=testctr1
+export TESTCTR2=testctr2
+export TESTVOL=testvol
+export TESTVOL1=testvol1
+export TESTVOL2=testvol2
+export TESTFILE0=testfile0
+export TESTFILE1=testfile1
+export TESTFILE2=testfile2
+export TESTBKMARK=testbkmark
+
+export LONGPNAME="poolname50charslong_012345678901234567890123456789"
+export LONGFSNAME="fsysname50charslong_012345678901234567890123456789"
+export SNAPFS="$TESTPOOL/$TESTFS@$TESTSNAP"
+export SNAPFS1="$TESTPOOL/$TESTVOL@$TESTSNAP"
+
+export VOLSIZE=150m
+export BIGVOLSIZE=1eb
+
+# Default to limit disks to be checked
+export MAX_FINDDISKSNUM=6
+
+# Default minimum size for file based vdevs in the test suite
+export MINVDEVSIZE=$((256 * 1024 * 1024))
+
+# Minimum vdev size possible as defined in the OS
+export SPA_MINDEVSIZE=$((64 * 1024 * 1024))
+
+# For iscsi target support
+export ISCSITGTFILE=/tmp/iscsitgt_file
+export ISCSITGT_FMRI=svc:/system/iscsitgt:default
+if ! is_linux; then
+export AUTO_SNAP=$(svcs -a | grep auto-snapshot | grep online | awk \
+    '{print $3}')
+fi
+
+#
+# finally, if we're running in a local zone
+# we take some additional actions
+if ! is_global_zone; then
+	reexport_pool
+fi
+
+export ZFS_VERSION=5
+export ZFS_ALL_VERSIONS="1 2 3 4 5"
+
+for i in $ZFS_ALL_VERSIONS; do
+	eval 'export ZFS_VERSION_$i="v${i}-fs"'
+done
+
+export MAX_PARTITIONS=8
+
+if is_linux; then
+	unpack_opts="--sparse -xf"
+	pack_opts="--sparse -cf"
+	verbose=" -v"
+	unpack_preserve=" -xpf"
+	pack_preserve=" -cpf"
+
+	ZVOL_DEVDIR="/dev/zvol"
+	ZVOL_RDEVDIR="/dev/zvol"
+	DEV_RDSKDIR="/dev"
+	DEV_MPATHDIR="/dev/mapper"
+
+	ZEDLET_DIR="/var/tmp/zed"
+	VDEVID_CONF="$ZEDLET_DIR/vdev_id.conf"
+	VDEVID_CONF_ETC="/etc/zfs/vdev_id.conf"
+
+
+	NEWFS_DEFAULT_FS="ext2"
+else
+	unpack_opts="xv"
+	pack_opts="cf"
+	verbose="v"
+	unpack_preserve="xpf"
+	pack_preserve="cpf"
+
+	ZVOL_DEVDIR="/dev/zvol/dsk"
+	ZVOL_RDEVDIR="/dev/zvol/rdsk"
+	DEV_DSKDIR="/dev/dsk"
+	DEV_RDSKDIR="/dev/rdsk"
+
+	NEWFS_DEFAULT_FS="ufs"
+fi
+export unpack_opts pack_opts verbose unpack_preserve pack_preserve \
+       ZVOL_DEVDIR ZVOL_RDEVDIR NEWFS_DEFAULT_FS DEV_RDSKDIR DEV_MPATHDIR \
+       ZEDLET_DIR VDEVID_CONF VDEVID_CONF_ETC