Move a few internal ARC strucutres to arc_impl.h

Add a new file named arc_impl.h and move a few internal
ARC structure definitions into this file. This is
needed in order to allow the Linux tracepoint functions to grub
around in the internals of these structures.

Signed-off-by: Prakash Surya <[email protected]>
Signed-off-by: Ned Bass <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>

1 files changed, 1 insertions, 116 deletions

diff --git a/module/zfs/arc.c b/module/zfs/arc.c
index 0742da0f6..148b208a8 100644
--- a/module/zfs/arc.c
+++ b/module/zfs/arc.c
@@ -145,6 +145,7 @@
 #include <sys/kstat.h>
 #include <sys/dmu_tx.h>
 #include <zfs_fletcher.h>
+#include <sys/arc_impl.h>
 
 #ifndef _KERNEL
 /* set with ZFS_DEBUG=watch, to enable watchpoints on frozen buffers */
@@ -218,46 +219,6 @@ unsigned long zfs_arc_max = 0;
 unsigned long zfs_arc_min = 0;
 unsigned long zfs_arc_meta_limit = 0;
 
-/*
- * Note that buffers can be in one of 6 states:
- *	ARC_anon	- anonymous (discussed below)
- *	ARC_mru		- recently used, currently cached
- *	ARC_mru_ghost	- recentely used, no longer in cache
- *	ARC_mfu		- frequently used, currently cached
- *	ARC_mfu_ghost	- frequently used, no longer in cache
- *	ARC_l2c_only	- exists in L2ARC but not other states
- * When there are no active references to the buffer, they are
- * are linked onto a list in one of these arc states.  These are
- * the only buffers that can be evicted or deleted.  Within each
- * state there are multiple lists, one for meta-data and one for
- * non-meta-data.  Meta-data (indirect blocks, blocks of dnodes,
- * etc.) is tracked separately so that it can be managed more
- * explicitly: favored over data, limited explicitly.
- *
- * Anonymous buffers are buffers that are not associated with
- * a DVA.  These are buffers that hold dirty block copies
- * before they are written to stable storage.  By definition,
- * they are "ref'd" and are considered part of arc_mru
- * that cannot be freed.  Generally, they will aquire a DVA
- * as they are written and migrate onto the arc_mru list.
- *
- * The ARC_l2c_only state is for buffers that are in the second
- * level ARC but no longer in any of the ARC_m* lists.  The second
- * level ARC itself may also contain buffers that are in any of
- * the ARC_m* states - meaning that a buffer can exist in two
- * places.  The reason for the ARC_l2c_only state is to keep the
- * buffer header in the hash table, so that reads that hit the
- * second level ARC benefit from these fast lookups.
- */
-
-typedef struct arc_state {
-	list_t	arcs_list[ARC_BUFC_NUMTYPES];	/* list of evictable buffers */
-	uint64_t arcs_lsize[ARC_BUFC_NUMTYPES];	/* amount of evictable data */
-	uint64_t arcs_size;	/* total amount of data in this state */
-	kmutex_t arcs_mtx;
-	arc_state_type_t arcs_state;
-} arc_state_t;
-
 /* The 6 states: */
 static arc_state_t ARC_anon;
 static arc_state_t ARC_mru;
@@ -522,69 +483,6 @@ static arc_state_t	*arc_l2c_only;
 #define	L2ARC_IS_VALID_COMPRESS(_c_) \
 	((_c_) == ZIO_COMPRESS_LZ4 || (_c_) == ZIO_COMPRESS_EMPTY)
 
-typedef struct l2arc_buf_hdr l2arc_buf_hdr_t;
-
-typedef struct arc_callback arc_callback_t;
-
-struct arc_callback {
-	void			*acb_private;
-	arc_done_func_t		*acb_done;
-	arc_buf_t		*acb_buf;
-	zio_t			*acb_zio_dummy;
-	arc_callback_t		*acb_next;
-};
-
-typedef struct arc_write_callback arc_write_callback_t;
-
-struct arc_write_callback {
-	void		*awcb_private;
-	arc_done_func_t	*awcb_ready;
-	arc_done_func_t	*awcb_physdone;
-	arc_done_func_t	*awcb_done;
-	arc_buf_t	*awcb_buf;
-};
-
-struct arc_buf_hdr {
-	/* protected by hash lock */
-	dva_t			b_dva;
-	uint64_t		b_birth;
-	uint64_t		b_cksum0;
-
-	kmutex_t		b_freeze_lock;
-	zio_cksum_t		*b_freeze_cksum;
-
-	arc_buf_hdr_t		*b_hash_next;
-	arc_buf_t		*b_buf;
-	uint32_t		b_flags;
-	uint32_t		b_datacnt;
-
-	arc_callback_t		*b_acb;
-	kcondvar_t		b_cv;
-
-	/* immutable */
-	arc_buf_contents_t	b_type;
-	uint64_t		b_size;
-	uint64_t		b_spa;
-
-	/* protected by arc state mutex */
-	arc_state_t		*b_state;
-	list_node_t		b_arc_node;
-
-	/* updated atomically */
-	clock_t			b_arc_access;
-	uint32_t		b_mru_hits;
-	uint32_t		b_mru_ghost_hits;
-	uint32_t		b_mfu_hits;
-	uint32_t		b_mfu_ghost_hits;
-	uint32_t		b_l2_hits;
-
-	/* self protecting */
-	refcount_t		b_refcnt;
-
-	l2arc_buf_hdr_t		*b_l2hdr;
-	list_node_t		b_l2node;
-};
-
 static list_t arc_prune_list;
 static kmutex_t arc_prune_mtx;
 static arc_buf_t *arc_eviction_list;
@@ -707,19 +605,6 @@ int l2arc_norw = B_FALSE;			/* no reads during writes */
 /*
  * L2ARC Internals
  */
-typedef struct l2arc_dev {
-	vdev_t			*l2ad_vdev;	/* vdev */
-	spa_t			*l2ad_spa;	/* spa */
-	uint64_t		l2ad_hand;	/* next write location */
-	uint64_t		l2ad_start;	/* first addr on device */
-	uint64_t		l2ad_end;	/* last addr on device */
-	uint64_t		l2ad_evict;	/* last addr eviction reached */
-	boolean_t		l2ad_first;	/* first sweep through */
-	boolean_t		l2ad_writing;	/* currently writing */
-	list_t			*l2ad_buflist;	/* buffer list */
-	list_node_t		l2ad_node;	/* device list node */
-} l2arc_dev_t;
-
 static list_t L2ARC_dev_list;			/* device list */
 static list_t *l2arc_dev_list;			/* device list pointer */
 static kmutex_t l2arc_dev_mtx;			/* device list mutex */