Linux AIO Support

nfsd uses do_readv_writev() to implement fops->read and fops->write.
do_readv_writev() will attempt to read/write using fops->aio_read and
fops->aio_write, but it will fallback to fops->read and fops->write when
AIO is not available. However, the fallback will perform a call for each
individual data page. Since our default recordsize is 128KB, sequential
operations on NFS will generate 32 DMU transactions where only 1
transaction was needed. That was unnecessary overhead and we implement
fops->aio_read and fops->aio_write to eliminate it.

ZFS originated in OpenSolaris, where the AIO API is entirely implemented
in userland's libc by intelligently mapping them to VOP_WRITE, VOP_READ
and VOP_FSYNC.  Linux implements AIO inside the kernel itself. Linux
filesystems therefore must implement their own AIO logic and nearly all
of them implement fops->aio_write synchronously. Consequently, they do
not implement aio_fsync(). However, since the ZPL works by mapping
Linux's VFS calls to the functions implementing Illumos' VFS operations,
we instead implement AIO in the kernel by mapping the operations to the
VOP_READ, VOP_WRITE and VOP_FSYNC equivalents. We therefore implement
fops->aio_fsync.

One might be inclined to make our fops->aio_write implementation
synchronous to make software that expects this behavior safe. However,
there are several reasons not to do this:

1. Other platforms do not implement aio_write() synchronously and since
the majority of userland software using AIO should be cross platform,
expectations of synchronous behavior should not be a problem.

2. We would hurt the performance of programs that use POSIX interfaces
properly while simultaneously encouraging the creation of more
non-compliant software.

3. The broader community concluded that userland software should be
patched to properly use POSIX interfaces instead of implementing hacks
in filesystems to cater to broken software. This concept is best
described as the O_PONIES debate.

4. Making an asynchronous write synchronous is non sequitur.

Any software dependent on synchronous aio_write behavior will suffer
data loss on ZFSOnLinux in a kernel panic / system failure of at most
zfs_txg_timeout seconds, which by default is 5 seconds. This seems like
a reasonable consequence of using non-compliant software.

It should be noted that this is also a problem in the kernel itself
where nfsd does not pass O_SYNC on files opened with it and instead
relies on a open()/write()/close() to enforce synchronous behavior when
the flush is only guarenteed on last close.

Exporting any filesystem that does not implement AIO via NFS risks data
loss in the event of a kernel panic / system failure when something else
is also accessing the file. Exporting any file system that implements
AIO the way this patch does bears similar risk. However, it seems
reasonable to forgo crippling our AIO implementation in favor of
developing patches to fix this problem in Linux's nfsd for the reasons
stated earlier. In the interim, the risk will remain. Failing to
implement AIO will not change the problem that nfsd created, so there is
no reason for nfsd's mistake to block our implementation of AIO.

It also should be noted that `aio_cancel()` will always return
`AIO_NOTCANCELED` under this implementation. It is possible to implement
aio_cancel by deferring work to taskqs and use `kiocb_set_cancel_fn()`
to set a callback function for cancelling work sent to taskqs, but the
simpler approach is allowed by the specification:

```
Which operations are cancelable is implementation-defined.
```

http://pubs.opengroup.org/onlinepubs/009695399/functions/aio_cancel.html

The only programs on my system that are capable of using `aio_cancel()`
are QEMU, beecrypt and fio use it according to a recursive grep of my
system's `/usr/src/debug`. That suggests that `aio_cancel()` users are
rare. Implementing aio_cancel() is left to a future date when it is
clear that there are consumers that benefit from its implementation to
justify the work.

Lastly, it is important to know that handling of the iovec updates differs
between Illumos and Linux in the implementation of read/write. On Linux,
it is the VFS' responsibility whle on Illumos, it is the filesystem's
responsibility.  We take the intermediate solution of copying the iovec
so that the ZFS code can update it like on Solaris while leaving the
originals alone. This imposes some overhead. We could always revisit
this should profiling show that the allocations are a problem.

Signed-off-by: Richard Yao <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #223
Closes #2373

3 files changed, 121 insertions, 37 deletions

diff --git a/module/zfs/zfs_replay.c b/module/zfs/zfs_replay.c
index 6ac10e262..0ca1e03b5 100644
--- a/module/zfs/zfs_replay.c
+++ b/module/zfs/zfs_replay.c
@@ -673,7 +673,7 @@ zfs_replay_write(zfs_sb_t *zsb, lr_write_t *lr, boolean_t byteswap)
 			zsb->z_replay_eof = eod;
 	}
 
-	written = zpl_write_common(ZTOI(zp), data, length, offset,
+	written = zpl_write_common(ZTOI(zp), data, length, &offset,
 	    UIO_SYSSPACE, 0, kcred);
 	if (written < 0)
 		error = -written;
diff --git a/module/zfs/zpl_file.c b/module/zfs/zpl_file.c
index d37cf07f9..5ea892320 100644
--- a/module/zfs/zpl_file.c
+++ b/module/zfs/zpl_file.c
@@ -115,6 +115,12 @@ zpl_fsync(struct file *filp, struct dentry *dentry, int datasync)
 	return (error);
 }
 
+static int
+zpl_aio_fsync(struct kiocb *kiocb, int datasync)
+{
+	struct file *filp = kiocb->ki_filp;
+	return (zpl_fsync(filp, filp->f_path.dentry, datasync));
+}
 #elif defined(HAVE_FSYNC_WITHOUT_DENTRY)
 /*
  * Linux 2.6.35 - 3.0 API,
@@ -137,6 +143,11 @@ zpl_fsync(struct file *filp, int datasync)
 	return (error);
 }
 
+static int
+zpl_aio_fsync(struct kiocb *kiocb, int datasync)
+{
+	return (zpl_fsync(kiocb->ki_filp, datasync));
+}
 #elif defined(HAVE_FSYNC_RANGE)
 /*
  * Linux 3.1 - 3.x API,
@@ -163,26 +174,30 @@ zpl_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
 
 	return (error);
 }
+
+static int
+zpl_aio_fsync(struct kiocb *kiocb, int datasync)
+{
+	return (zpl_fsync(kiocb->ki_filp, kiocb->ki_pos,
+	    kiocb->ki_pos + kiocb->ki_nbytes, datasync));
+}
 #else
 #error "Unsupported fops->fsync() implementation"
 #endif
 
-ssize_t
-zpl_read_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
-    uio_seg_t segment, int flags, cred_t *cr)
+static inline ssize_t
+zpl_read_common_iovec(struct inode *ip, const struct iovec *iovp, size_t count,
+    unsigned long nr_segs, loff_t *ppos, uio_seg_t segment,
+    int flags, cred_t *cr)
 {
-	int error;
 	ssize_t read;
-	struct iovec iov;
 	uio_t uio;
+	int error;
 
-	iov.iov_base = (void *)buf;
-	iov.iov_len = len;
-
-	uio.uio_iov = &iov;
-	uio.uio_resid = len;
-	uio.uio_iovcnt = 1;
-	uio.uio_loffset = pos;
+	uio.uio_iov = (struct iovec *)iovp;
+	uio.uio_resid = count;
+	uio.uio_iovcnt = nr_segs;
+	uio.uio_loffset = *ppos;
 	uio.uio_limit = MAXOFFSET_T;
 	uio.uio_segflg = segment;
 
@@ -190,12 +205,26 @@ zpl_read_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
 	if (error < 0)
 		return (error);
 
-	read = len - uio.uio_resid;
+	read = count - uio.uio_resid;
+	*ppos += read;
 	task_io_account_read(read);
 
 	return (read);
 }
 
+inline ssize_t
+zpl_read_common(struct inode *ip, const char *buf, size_t len, loff_t *ppos,
+    uio_seg_t segment, int flags, cred_t *cr)
+{
+	struct iovec iov;
+
+	iov.iov_base = (void *)buf;
+	iov.iov_len = len;
+
+	return (zpl_read_common_iovec(ip, &iov, len, 1, ppos, segment,
+	    flags, cr));
+}
+
 static ssize_t
 zpl_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos)
 {
@@ -203,33 +232,50 @@ zpl_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos)
 	ssize_t read;
 
 	crhold(cr);
-	read = zpl_read_common(filp->f_mapping->host, buf, len, *ppos,
+	read = zpl_read_common(filp->f_mapping->host, buf, len, ppos,
 	    UIO_USERSPACE, filp->f_flags, cr);
 	crfree(cr);
 
-	if (read < 0)
-		return (read);
+	return (read);
+}
+
+static ssize_t
+zpl_aio_read(struct kiocb *kiocb, const struct iovec *iovp,
+	unsigned long nr_segs, loff_t pos)
+{
+	cred_t *cr = CRED();
+	struct file *filp = kiocb->ki_filp;
+	size_t count = kiocb->ki_nbytes;
+	ssize_t read;
+	size_t alloc_size = sizeof (struct iovec) * nr_segs;
+	struct iovec *iov_tmp = kmem_alloc(alloc_size, KM_SLEEP);
+	bcopy(iovp, iov_tmp, alloc_size);
+
+	ASSERT(iovp);
+
+	crhold(cr);
+	read = zpl_read_common_iovec(filp->f_mapping->host, iov_tmp, count,
+	    nr_segs, &kiocb->ki_pos, UIO_USERSPACE, filp->f_flags, cr);
+	crfree(cr);
+
+	kmem_free(iov_tmp, alloc_size);
 
-	*ppos += read;
 	return (read);
 }
 
-ssize_t
-zpl_write_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
-    uio_seg_t segment, int flags, cred_t *cr)
+static inline ssize_t
+zpl_write_common_iovec(struct inode *ip, const struct iovec *iovp, size_t count,
+    unsigned long nr_segs, loff_t *ppos, uio_seg_t segment,
+    int flags, cred_t *cr)
 {
-	int error;
 	ssize_t wrote;
-	struct iovec iov;
 	uio_t uio;
+	int error;
 
-	iov.iov_base = (void *)buf;
-	iov.iov_len = len;
-
-	uio.uio_iov = &iov;
-	uio.uio_resid = len,
-	uio.uio_iovcnt = 1;
-	uio.uio_loffset = pos;
+	uio.uio_iov = (struct iovec *)iovp;
+	uio.uio_resid = count;
+	uio.uio_iovcnt = nr_segs;
+	uio.uio_loffset = *ppos;
 	uio.uio_limit = MAXOFFSET_T;
 	uio.uio_segflg = segment;
 
@@ -237,11 +283,24 @@ zpl_write_common(struct inode *ip, const char *buf, size_t len, loff_t pos,
 	if (error < 0)
 		return (error);
 
-	wrote = len - uio.uio_resid;
+	wrote = count - uio.uio_resid;
+	*ppos += wrote;
 	task_io_account_write(wrote);
 
 	return (wrote);
 }
+inline ssize_t
+zpl_write_common(struct inode *ip, const char *buf, size_t len, loff_t *ppos,
+    uio_seg_t segment, int flags, cred_t *cr)
+{
+	struct iovec iov;
+
+	iov.iov_base = (void *)buf;
+	iov.iov_len = len;
+
+	return (zpl_write_common_iovec(ip, &iov, len, 1, ppos, segment,
+	    flags, cr));
+}
 
 static ssize_t
 zpl_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos)
@@ -250,14 +309,34 @@ zpl_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos)
 	ssize_t wrote;
 
 	crhold(cr);
-	wrote = zpl_write_common(filp->f_mapping->host, buf, len, *ppos,
+	wrote = zpl_write_common(filp->f_mapping->host, buf, len, ppos,
 	    UIO_USERSPACE, filp->f_flags, cr);
 	crfree(cr);
 
-	if (wrote < 0)
-		return (wrote);
+	return (wrote);
+}
+
+static ssize_t
+zpl_aio_write(struct kiocb *kiocb, const struct iovec *iovp,
+	unsigned long nr_segs, loff_t pos)
+{
+	cred_t *cr = CRED();
+	struct file *filp = kiocb->ki_filp;
+	size_t count = kiocb->ki_nbytes;
+	ssize_t wrote;
+	size_t alloc_size = sizeof (struct iovec) * nr_segs;
+	struct iovec *iov_tmp = kmem_alloc(alloc_size, KM_SLEEP);
+	bcopy(iovp, iov_tmp, alloc_size);
+
+	ASSERT(iovp);
+
+	crhold(cr);
+	wrote = zpl_write_common_iovec(filp->f_mapping->host, iov_tmp, count,
+	    nr_segs, &kiocb->ki_pos, UIO_USERSPACE, filp->f_flags, cr);
+	crfree(cr);
+
+	kmem_free(iov_tmp, alloc_size);
 
-	*ppos += wrote;
 	return (wrote);
 }
 
@@ -646,8 +725,11 @@ const struct file_operations zpl_file_operations = {
 	.llseek		= zpl_llseek,
 	.read		= zpl_read,
 	.write		= zpl_write,
+	.aio_read	= zpl_aio_read,
+	.aio_write	= zpl_aio_write,
 	.mmap		= zpl_mmap,
 	.fsync		= zpl_fsync,
+	.aio_fsync	= zpl_aio_fsync,
 #ifdef HAVE_FILE_FALLOCATE
 	.fallocate	= zpl_fallocate,
 #endif /* HAVE_FILE_FALLOCATE */
diff --git a/module/zfs/zpl_xattr.c b/module/zfs/zpl_xattr.c
index 107b80300..526c3f9e6 100644
--- a/module/zfs/zpl_xattr.c
+++ b/module/zfs/zpl_xattr.c
@@ -239,6 +239,7 @@ zpl_xattr_get_dir(struct inode *ip, const char *name, void *value,
 {
 	struct inode *dxip = NULL;
 	struct inode *xip = NULL;
+	loff_t pos = 0;
 	int error;
 
 	/* Lookup the xattr directory */
@@ -261,7 +262,7 @@ zpl_xattr_get_dir(struct inode *ip, const char *name, void *value,
 		goto out;
 	}
 
-	error = zpl_read_common(xip, value, size, 0, UIO_SYSSPACE, 0, cr);
+	error = zpl_read_common(xip, value, size, &pos, UIO_SYSSPACE, 0, cr);
 out:
 	if (xip)
 		iput(xip);
@@ -357,6 +358,7 @@ zpl_xattr_set_dir(struct inode *ip, const char *name, const void *value,
 	ssize_t wrote;
 	int lookup_flags, error;
 	const int xattr_mode = S_IFREG | 0644;
+	loff_t pos = 0;
 
 	/*
 	 * Lookup the xattr directory.  When we're adding an entry pass
@@ -407,7 +409,7 @@ zpl_xattr_set_dir(struct inode *ip, const char *name, const void *value,
 	if (error)
 		goto out;
 
-	wrote = zpl_write_common(xip, value, size, 0, UIO_SYSSPACE, 0, cr);
+	wrote = zpl_write_common(xip, value, size, &pos, UIO_SYSSPACE, 0, cr);
 	if (wrote < 0)
 		error = wrote;