diff options
| author | Christian Kohlschütter <[email protected]> | 2011-06-16 21:56:38 +0200 |
|---|---|---|
| committer | Brian Behlendorf <[email protected]> | 2011-06-17 16:35:49 -0700 |
| commit | df30f56639f96175ba71d83b4456ccf410c46542 (patch) | |
| tree | 2aa6e7402bec3ed59f4cb4adb4a4f22f24512f9c /module | |
| parent | 96801d290652812780cf6c070729154d4af8e1ce (diff) | |
Add "ashift" property to zpool create
Some disks with internal sectors larger than 512 bytes (e.g., 4k) can
suffer from bad write performance when ashift is not configured
correctly. This is caused by the disk not reporting its actual sector
size, but a sector size of 512 bytes. The drive may behave this way
for compatibility reasons. For example, the WDC WD20EARS disks are
known to exhibit this behavior.
When creating a zpool, ZFS takes that wrong sector size and sets the
"ashift" property accordingly (to 9: 1<<9=512), whereas it should be
set to 12 for 4k sectors (1<<12=4096).
This patch allows an adminstrator to manual specify the known correct
ashift size at 'zpool create' time. This can significantly improve
performance in certain cases. However, it will have an impact on your
total pool capacity. See the updated ashift property description
in the zpool.8 man page for additional details.
Valid values for the ashift property range from 9 to 17 (512B-128KB).
Additionally, you may set the ashift to 0 if you wish to auto-detect
the sector size based on what the disk reports, this is the default
behavior. The most common ashift values are 9 and 12.
Example:
zpool create -o ashift=12 tank raidz2 sda sdb sdc sdd
Closes #280
Original-patch-by: Richard Laager <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Diffstat (limited to 'module')
| -rw-r--r-- | module/zcommon/zpool_prop.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/module/zcommon/zpool_prop.c b/module/zcommon/zpool_prop.c index 37d977f47..30a64d51a 100644 --- a/module/zcommon/zpool_prop.c +++ b/module/zcommon/zpool_prop.c @@ -87,6 +87,10 @@ zpool_prop_init(void) PROP_READONLY, ZFS_TYPE_POOL, "<1.00x or higher if deduped>", "DEDUP"); + /* readonly onetime number properties */ + zprop_register_number(ZPOOL_PROP_ASHIFT, "ashift", 0, PROP_ONETIME, + ZFS_TYPE_POOL, "<ashift, 9-17, or 0=default>", "ASHIFT"); + /* default number properties */ zprop_register_number(ZPOOL_PROP_VERSION, "version", SPA_VERSION, PROP_DEFAULT, ZFS_TYPE_POOL, "<version>", "VERSION"); |