Distributed Spare (dRAID) Feature

This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <[email protected]> Co-authored-by: Mark Maybee <[email protected]> Co-authored-by: Don Brady <[email protected]> Co-authored-by: Matthew Ahrens <[email protected]> Co-authored-by: Brian Behlendorf <[email protected]> Reviewed-by: Mark Maybee <[email protected]> Reviewed-by: Matt Ahrens <[email protected]> Reviewed-by: Tony Hutter <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #10102
author: Brian Behlendorf <[email protected]> 2020-11-13 13:51:51 -0800
committer: GitHub <[email protected]> 2020-11-13 13:51:51 -0800
commit: b2255edcc0099e62ad46a3dd9d64537663c6aee3 (patch)
tree: 6cfe0d0fd30fb451396551a991d50f4bdc0cf353 /module/zfs
parent: a724db03740133c46b9a577b41a6f7221acd3e1f (diff)
26 files changed, 5253 insertions, 1347 deletions
diff --git a/module/zfs/Makefile.in b/module/zfs/Makefile.in
index 8ee524fff..653ea0da9 100644
--- a/module/zfs/Makefile.in
+++ b/module/zfs/Makefile.in
@@ -84,6 +84,8 @@ $(MODULE)-objs += uberblock.o
 $(MODULE)-objs += unique.o
 $(MODULE)-objs += vdev.o
 $(MODULE)-objs += vdev_cache.o
+$(MODULE)-objs += vdev_draid.o
+$(MODULE)-objs += vdev_draid_rand.o
 $(MODULE)-objs += vdev_indirect.o
 $(MODULE)-objs += vdev_indirect_births.o
 $(MODULE)-objs += vdev_indirect_mapping.o
diff --git a/module/zfs/abd.c b/module/zfs/abd.c
index 6018a42ca..68d4aa5f5 100644
--- a/module/zfs/abd.c
+++ b/module/zfs/abd.c
@@ -781,16 +781,17 @@ int
 abd_iterate_func(abd_t *abd, size_t off, size_t size,
     abd_iter_func_t *func, void *private)
 {
-	int ret = 0;
 	struct abd_iter aiter;
-	boolean_t abd_multi;
-	abd_t *c_abd;
+	int ret = 0;
+
+	if (size == 0)
+		return (0);
 
 	abd_verify(abd);
 	ASSERT3U(off + size, <=, abd->abd_size);
 
-	abd_multi = abd_is_gang(abd);
-	c_abd = abd_init_abd_iter(abd, &aiter, off);
+	boolean_t abd_multi = abd_is_gang(abd);
+	abd_t *c_abd = abd_init_abd_iter(abd, &aiter, off);
 
 	while (size > 0) {
 		/* If we are at the end of the gang ABD we are done */
@@ -920,6 +921,9 @@ abd_iterate_func2(abd_t *dabd, abd_t *sabd, size_t doff, size_t soff,
 	boolean_t dabd_is_gang_abd, sabd_is_gang_abd;
 	abd_t *c_dabd, *c_sabd;
 
+	if (size == 0)
+		return (0);
+
 	abd_verify(dabd);
 	abd_verify(sabd);
 
diff --git a/module/zfs/dsl_scan.c b/module/zfs/dsl_scan.c
index f6a5ceca6..40adfbcee 100644
--- a/module/zfs/dsl_scan.c
+++ b/module/zfs/dsl_scan.c
@@ -713,7 +713,7 @@ dsl_scan_setup_check(void *arg, dmu_tx_t *tx)
 	return (0);
 }
 
-static void
+void
 dsl_scan_setup_sync(void *arg, dmu_tx_t *tx)
 {
 	dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
@@ -3328,19 +3328,12 @@ dsl_scan_need_resilver(spa_t *spa, const dva_t *dva, size_t psize,
 	}
 
 	/*
-	 * Check if the txg falls within the range which must be
-	 * resilvered.  DVAs outside this range can always be skipped.
-	 */
-	if (!vdev_dtl_contains(vd, DTL_PARTIAL, phys_birth, 1))
-		return (B_FALSE);
-
-	/*
 	 * Check if the top-level vdev must resilver this offset.
 	 * When the offset does not intersect with a dirty leaf DTL
 	 * then it may be possible to skip the resilver IO.  The psize
 	 * is provided instead of asize to simplify the check for RAIDZ.
 	 */
-	if (!vdev_dtl_need_resilver(vd, DVA_GET_OFFSET(dva), psize))
+	if (!vdev_dtl_need_resilver(vd, dva, psize, phys_birth))
 		return (B_FALSE);
 
 	/*
diff --git a/module/zfs/metaslab.c b/module/zfs/metaslab.c
index 325f505b7..fcf1285f6 100644
--- a/module/zfs/metaslab.c
+++ b/module/zfs/metaslab.c
@@ -32,6 +32,7 @@
 #include <sys/space_map.h>
 #include <sys/metaslab_impl.h>
 #include <sys/vdev_impl.h>
+#include <sys/vdev_draid.h>
 #include <sys/zio.h>
 #include <sys/spa_impl.h>
 #include <sys/zfeature.h>
@@ -1563,6 +1564,7 @@ metaslab_block_find(zfs_btree_t *t, range_tree_t *rt, uint64_t start,
 
 #if defined(WITH_DF_BLOCK_ALLOCATOR) || \
     defined(WITH_CF_BLOCK_ALLOCATOR)
+
 /*
  * This is a helper function that can be used by the allocator to find a
  * suitable block to allocate. This will search the specified B-tree looking
@@ -1654,6 +1656,7 @@ metaslab_df_alloc(metaslab_t *msp, uint64_t size)
 		range_seg_t *rs;
 		if (zfs_btree_numnodes(&msp->ms_allocatable_by_size) == 0)
 			metaslab_size_tree_full_load(msp->ms_allocatable);
+
 		if (metaslab_df_use_largest_segment) {
 			/* use largest free segment */
 			rs = zfs_btree_last(&msp->ms_allocatable_by_size, NULL);
@@ -2616,6 +2619,10 @@ metaslab_init(metaslab_group_t *mg, uint64_t id, uint64_t object,
 	ms->ms_allocator = -1;
 	ms->ms_new = B_TRUE;
 
+	vdev_ops_t *ops = vd->vdev_ops;
+	if (ops->vdev_op_metaslab_init != NULL)
+		ops->vdev_op_metaslab_init(vd, &ms->ms_start, &ms->ms_size);
+
 	/*
 	 * We only open space map objects that already exist. All others
 	 * will be opened when we finally allocate an object for it.
@@ -5813,7 +5820,6 @@ metaslab_alloc(spa_t *spa, metaslab_class_t *mc, uint64_t psize, blkptr_t *bp,
 			metaslab_group_alloc_increment(spa,
 			    DVA_GET_VDEV(&dva[d]), zio, flags, allocator);
 		}
-
 	}
 	ASSERT(error == 0);
 	ASSERT(BP_GET_NDVAS(bp) == ndvas);
diff --git a/module/zfs/mmp.c b/module/zfs/mmp.c
index 99852521b..d05c9db24 100644
--- a/module/zfs/mmp.c
+++ b/module/zfs/mmp.c
@@ -307,8 +307,17 @@ mmp_next_leaf(spa_t *spa)
 		if (leaf == NULL)
 			leaf = list_head(&spa->spa_leaf_list);
 
-		if (!vdev_writeable(leaf)) {
+		/*
+		 * We skip unwritable, offline, detached, and dRAID spare
+		 * devices as they are either not legal targets or the write
+		 * may fail or not be seen by other hosts.  Skipped dRAID
+		 * spares can never be written so the fail mask is not set.
+		 */
+		if (!vdev_writeable(leaf) || leaf->vdev_offline ||
+		    leaf->vdev_detached) {
 			fail_mask |= MMP_FAIL_NOT_WRITABLE;
+		} else if (leaf->vdev_ops == &vdev_draid_spare_ops) {
+			continue;
 		} else if (leaf->vdev_mmp_pending != 0) {
 			fail_mask |= MMP_FAIL_WRITE_PENDING;
 		} else {
diff --git a/module/zfs/spa.c b/module/zfs/spa.c
index 9d1d4e0cc..ae8964e6f 100644
--- a/module/zfs/spa.c
+++ b/module/zfs/spa.c
@@ -60,6 +60,7 @@
 #include <sys/vdev_rebuild.h>
 #include <sys/vdev_trim.h>
 #include <sys/vdev_disk.h>
+#include <sys/vdev_draid.h>
 #include <sys/metaslab.h>
 #include <sys/metaslab_impl.h>
 #include <sys/mmp.h>
@@ -3681,7 +3682,14 @@ spa_ld_trusted_config(spa_t *spa, spa_import_type_t type,
 	/*
 	 * Build a new vdev tree from the trusted config
 	 */
-	VERIFY(spa_config_parse(spa, &mrvd, nv, NULL, 0, VDEV_ALLOC_LOAD) == 0);
+	error = spa_config_parse(spa, &mrvd, nv, NULL, 0, VDEV_ALLOC_LOAD);
+	if (error != 0) {
+		nvlist_free(mos_config);
+		spa_config_exit(spa, SCL_ALL, FTAG);
+		spa_load_failed(spa, "spa_config_parse failed [error=%d]",
+		    error);
+		return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error));
+	}
 
 	/*
 	 * Vdev paths in the MOS may be obsolete. If the untrusted config was
@@ -5631,7 +5639,7 @@ spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props,
 	uint64_t txg = TXG_INITIAL;
 	nvlist_t **spares, **l2cache;
 	uint_t nspares, nl2cache;
-	uint64_t version, obj;
+	uint64_t version, obj, ndraid = 0;
 	boolean_t has_features;
 	boolean_t has_encryption;
 	boolean_t has_allocclass;
@@ -5753,8 +5761,8 @@ spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props,
 
 	if (error == 0 &&
 	    (error = vdev_create(rvd, txg, B_FALSE)) == 0 &&
-	    (error = spa_validate_aux(spa, nvroot, txg,
-	    VDEV_ALLOC_ADD)) == 0) {
+	    (error = vdev_draid_spare_create(nvroot, rvd, &ndraid, 0)) == 0 &&
+	    (error = spa_validate_aux(spa, nvroot, txg, VDEV_ALLOC_ADD)) == 0) {
 		/*
 		 * instantiate the metaslab groups (this will dirty the vdevs)
 		 * we can no longer error exit past this point
@@ -5895,6 +5903,9 @@ spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props,
 		spa_sync_props(props, tx);
 	}
 
+	for (int i = 0; i < ndraid; i++)
+		spa_feature_incr(spa, SPA_FEATURE_DRAID, tx);
+
 	dmu_tx_commit(tx);
 
 	spa->spa_sync_on = B_TRUE;
@@ -6404,12 +6415,25 @@ spa_reset(const char *pool)
  */
 
 /*
+ * This is called as a synctask to increment the draid feature flag
+ */
+static void
+spa_draid_feature_incr(void *arg, dmu_tx_t *tx)
+{
+	spa_t *spa = dmu_tx_pool(tx)->dp_spa;
+	int draid = (int)(uintptr_t)arg;
+
+	for (int c = 0; c < draid; c++)
+		spa_feature_incr(spa, SPA_FEATURE_DRAID, tx);
+}
+
+/*
  * Add a device to a storage pool.
  */
 int
 spa_vdev_add(spa_t *spa, nvlist_t *nvroot)
 {
-	uint64_t txg;
+	uint64_t txg, ndraid = 0;
 	int error;
 	vdev_t *rvd = spa->spa_root_vdev;
 	vdev_t *vd, *tvd;
@@ -6438,8 +6462,23 @@ spa_vdev_add(spa_t *spa, nvlist_t *nvroot)
 		return (spa_vdev_exit(spa, vd, txg, EINVAL));
 
 	if (vd->vdev_children != 0 &&
-	    (error = vdev_create(vd, txg, B_FALSE)) != 0)
+	    (error = vdev_create(vd, txg, B_FALSE)) != 0) {
 		return (spa_vdev_exit(spa, vd, txg, error));
+	}
+
+	/*
+	 * The virtual dRAID spares must be added after vdev tree is created
+	 * and the vdev guids are generated.  The guid of their assoicated
+	 * dRAID is stored in the config and used when opening the spare.
+	 */
+	if ((error = vdev_draid_spare_create(nvroot, vd, &ndraid,
+	    rvd->vdev_children)) == 0) {
+		if (ndraid > 0 && nvlist_lookup_nvlist_array(nvroot,
+		    ZPOOL_CONFIG_SPARES, &spares, &nspares) != 0)
+			nspares = 0;
+	} else {
+		return (spa_vdev_exit(spa, vd, txg, error));
+	}
 
 	/*
 	 * We must validate the spares and l2cache devices after checking the
@@ -6452,7 +6491,7 @@ spa_vdev_add(spa_t *spa, nvlist_t *nvroot)
 	 * If we are in the middle of a device removal, we can only add
 	 * devices which match the existing devices in the pool.
 	 * If we are in the middle of a removal, or have some indirect
-	 * vdevs, we can not add raidz toplevels.
+	 * vdevs, we can not add raidz or dRAID top levels.
 	 */
 	if (spa->spa_vdev_removal != NULL ||
 	    spa->spa_removing_phys.sr_prev_indirect_vdev != -1) {
@@ -6462,10 +6501,10 @@ spa_vdev_add(spa_t *spa, nvlist_t *nvroot)
 			    tvd->vdev_ashift != spa->spa_max_ashift) {
 				return (spa_vdev_exit(spa, vd, txg, EINVAL));
 			}
-			/* Fail if top level vdev is raidz */
-			if (tvd->vdev_ops == &vdev_raidz_ops) {
+			/* Fail if top level vdev is raidz or a dRAID */
+			if (vdev_get_nparity(tvd) != 0)
 				return (spa_vdev_exit(spa, vd, txg, EINVAL));
-			}
+
 			/*
 			 * Need the top level mirror to be
 			 * a mirror of leaf vdevs only
@@ -6506,6 +6545,19 @@ spa_vdev_add(spa_t *spa, nvlist_t *nvroot)
 	}
 
 	/*
+	 * We can't increment a feature while holding spa_vdev so we
+	 * have to do it in a synctask.
+	 */
+	if (ndraid != 0) {
+		dmu_tx_t *tx;
+
+		tx = dmu_tx_create_assigned(spa->spa_dsl_pool, txg);
+		dsl_sync_task_nowait(spa->spa_dsl_pool, spa_draid_feature_incr,
+		    (void *)(uintptr_t)ndraid, tx);
+		dmu_tx_commit(tx);
+	}
+
+	/*
 	 * We have to be careful when adding new vdevs to an existing pool.
 	 * If other threads start allocating from these vdevs before we
 	 * sync the config cache, and we lose power, then upon reboot we may
@@ -6615,14 +6667,27 @@ spa_vdev_attach(spa_t *spa, uint64_t guid, nvlist_t *nvroot, int replacing,
 	if (oldvd->vdev_top->vdev_islog && newvd->vdev_isspare)
 		return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
 
+	/*
+	 * A dRAID spare can only replace a child of its parent dRAID vdev.
+	 */
+	if (newvd->vdev_ops == &vdev_draid_spare_ops &&
+	    oldvd->vdev_top != vdev_draid_spare_get_parent(newvd)) {
+		return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
+	}
+
 	if (rebuild) {
 		/*
-		 * For rebuilds, the parent vdev must support reconstruction
+		 * For rebuilds, the top vdev must support reconstruction
 		 * using only space maps.  This means the only allowable
-		 * parents are the root vdev or a mirror vdev.
+		 * vdevs types are the root vdev, a mirror, or dRAID.
 		 */
-		if (pvd->vdev_ops != &vdev_mirror_ops &&
-		    pvd->vdev_ops != &vdev_root_ops) {
+		tvd = pvd;
+		if (pvd->vdev_top != NULL)
+			tvd = pvd->vdev_top;
+
+		if (tvd->vdev_ops != &vdev_mirror_ops &&
+		    tvd->vdev_ops != &vdev_root_ops &&
+		    tvd->vdev_ops != &vdev_draid_ops) {
 			return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
 		}
 	}
@@ -6915,14 +6980,20 @@ spa_vdev_detach(spa_t *spa, uint64_t guid, uint64_t pguid, int replace_done)
 	}
 
 	/*
-	 * If we are detaching the original disk from a spare, then it implies
-	 * that the spare should become a real disk, and be removed from the
-	 * active spare list for the pool.
+	 * If we are detaching the original disk from a normal spare, then it
+	 * implies that the spare should become a real disk, and be removed
+	 * from the active spare list for the pool.  dRAID spares on the
+	 * other hand are coupled to the pool and thus should never be removed
+	 * from the spares list.
 	 */
-	if (pvd->vdev_ops == &vdev_spare_ops &&
-	    vd->vdev_id == 0 &&
-	    pvd->vdev_child[pvd->vdev_children - 1]->vdev_isspare)
-		unspare = B_TRUE;
+	if (pvd->vdev_ops == &vdev_spare_ops && vd->vdev_id == 0) {
+		vdev_t *last_cvd = pvd->vdev_child[pvd->vdev_children - 1];
+
+		if (last_cvd->vdev_isspare &&
+		    last_cvd->vdev_ops != &vdev_draid_spare_ops) {
+			unspare = B_TRUE;
+		}
+	}
 
 	/*
 	 * Erase the disk labels so the disk can be used for other things.
@@ -8013,18 +8084,9 @@ spa_async_thread(void *arg)
 	/*
 	 * If any devices are done replacing, detach them.
 	 */
-	if (tasks & SPA_ASYNC_RESILVER_DONE)
+	if (tasks & SPA_ASYNC_RESILVER_DONE ||
+	    tasks & SPA_ASYNC_REBUILD_DONE) {
 		spa_vdev_resilver_done(spa);
-
-	/*
-	 * If any devices are done replacing, detach them.  Then if no
-	 * top-level vdevs are rebuilding attempt to kick off a scrub.
-	 */
-	if (tasks & SPA_ASYNC_REBUILD_DONE) {
-		spa_vdev_resilver_done(spa);
-
-		if (!vdev_rebuild_active(spa->spa_root_vdev))
-			(void) dsl_scan(spa->spa_dsl_pool, POOL_SCAN_SCRUB);
 	}
 
 	/*
diff --git a/module/zfs/spa_misc.c b/module/zfs/spa_misc.c
index 1640dcedd..c6b3e8c11 100644
--- a/module/zfs/spa_misc.c
+++ b/module/zfs/spa_misc.c
@@ -741,6 +741,7 @@ spa_add(const char *name, nvlist_t *config, const char *altroot)
 
 	spa->spa_min_ashift = INT_MAX;
 	spa->spa_max_ashift = 0;
+	spa->spa_min_alloc = INT_MAX;
 
 	/* Reset cached value */
 	spa->spa_dedup_dspace = ~0ULL;
diff --git a/module/zfs/vdev.c b/module/zfs/vdev.c
index e41e79ab8..38f36e52f 100644
--- a/module/zfs/vdev.c
+++ b/module/zfs/vdev.c
@@ -40,6 +40,7 @@
 #include <sys/dsl_dir.h>
 #include <sys/vdev_impl.h>
 #include <sys/vdev_rebuild.h>
+#include <sys/vdev_draid.h>
 #include <sys/uberblock_impl.h>
 #include <sys/metaslab.h>
 #include <sys/metaslab_impl.h>
@@ -51,6 +52,7 @@
 #include <sys/arc.h>
 #include <sys/zil.h>
 #include <sys/dsl_scan.h>
+#include <sys/vdev_raidz.h>
 #include <sys/abd.h>
 #include <sys/vdev_initialize.h>
 #include <sys/vdev_trim.h>
@@ -193,6 +195,8 @@ vdev_dbgmsg_print_tree(vdev_t *vd, int indent)
 static vdev_ops_t *vdev_ops_table[] = {
 	&vdev_root_ops,
 	&vdev_raidz_ops,
+	&vdev_draid_ops,
+	&vdev_draid_spare_ops,
 	&vdev_mirror_ops,
 	&vdev_replacing_ops,
 	&vdev_spare_ops,
@@ -221,10 +225,11 @@ vdev_getops(const char *type)
 
 /* ARGSUSED */
 void
-vdev_default_xlate(vdev_t *vd, const range_seg64_t *in, range_seg64_t *res)
+vdev_default_xlate(vdev_t *vd, const range_seg64_t *logical_rs,
+    range_seg64_t *physical_rs, range_seg64_t *remain_rs)
 {
-	res->rs_start = in->rs_start;
-	res->rs_end = in->rs_end;
+	physical_rs->rs_start = logical_rs->rs_start;
+	physical_rs->rs_end = logical_rs->rs_end;
 }
 
 /*
@@ -264,6 +269,12 @@ vdev_default_asize(vdev_t *vd, uint64_t psize)
 	return (asize);
 }
 
+uint64_t
+vdev_default_min_asize(vdev_t *vd)
+{
+	return (vd->vdev_min_asize);
+}
+
 /*
  * Get the minimum allocatable size. We define the allocatable size as
  * the vdev's asize rounded to the nearest metaslab. This allows us to
@@ -289,15 +300,7 @@ vdev_get_min_asize(vdev_t *vd)
 	if (vd == vd->vdev_top)
 		return (P2ALIGN(vd->vdev_asize, 1ULL << vd->vdev_ms_shift));
 
-	/*
-	 * The allocatable space for a raidz vdev is N * sizeof(smallest child),
-	 * so each child must provide at least 1/Nth of its asize.
-	 */
-	if (pvd->vdev_ops == &vdev_raidz_ops)
-		return ((pvd->vdev_min_asize + pvd->vdev_children - 1) /
-		    pvd->vdev_children);
-
-	return (pvd->vdev_min_asize);
+	return (pvd->vdev_ops->vdev_op_min_asize(pvd));
 }
 
 void
@@ -309,6 +312,48 @@ vdev_set_min_asize(vdev_t *vd)
 		vdev_set_min_asize(vd->vdev_child[c]);
 }
 
+/*
+ * Get the minimal allocation size for the top-level vdev.
+ */
+uint64_t
+vdev_get_min_alloc(vdev_t *vd)
+{
+	uint64_t min_alloc = 1ULL << vd->vdev_ashift;
+
+	if (vd->vdev_ops->vdev_op_min_alloc != NULL)
+		min_alloc = vd->vdev_ops->vdev_op_min_alloc(vd);
+
+	return (min_alloc);
+}
+
+/*
+ * Get the parity level for a top-level vdev.
+ */
+uint64_t
+vdev_get_nparity(vdev_t *vd)
+{
+	uint64_t nparity = 0;
+
+	if (vd->vdev_ops->vdev_op_nparity != NULL)
+		nparity = vd->vdev_ops->vdev_op_nparity(vd);
+
+	return (nparity);
+}
+
+/*
+ * Get the number of data disks for a top-level vdev.
+ */
+uint64_t
+vdev_get_ndisks(vdev_t *vd)
+{
+	uint64_t ndisks = 1;
+
+	if (vd->vdev_ops->vdev_op_ndisks != NULL)
+		ndisks = vd->vdev_ops->vdev_op_ndisks(vd);
+
+	return (ndisks);
+}
+
 vdev_t *
 vdev_lookup_top(spa_t *spa, uint64_t vdev)
 {
@@ -551,6 +596,7 @@ vdev_alloc_common(spa_t *spa, uint_t id, uint64_t guid, vdev_ops_t *ops)
 	list_link_init(&vd->vdev_initialize_node);
 	list_link_init(&vd->vdev_leaf_node);
 	list_link_init(&vd->vdev_trim_node);
+
 	mutex_init(&vd->vdev_dtl_lock, NULL, MUTEX_NOLOCKDEP, NULL);
 	mutex_init(&vd->vdev_stat_lock, NULL, MUTEX_DEFAULT, NULL);
 	mutex_init(&vd->vdev_probe_lock, NULL, MUTEX_DEFAULT, NULL);
@@ -569,9 +615,7 @@ vdev_alloc_common(spa_t *spa, uint_t id, uint64_t guid, vdev_ops_t *ops)
 	cv_init(&vd->vdev_trim_io_cv, NULL, CV_DEFAULT, NULL);
 
 	mutex_init(&vd->vdev_rebuild_lock, NULL, MUTEX_DEFAULT, NULL);
-	mutex_init(&vd->vdev_rebuild_io_lock, NULL, MUTEX_DEFAULT, NULL);
 	cv_init(&vd->vdev_rebuild_cv, NULL, CV_DEFAULT, NULL);
-	cv_init(&vd->vdev_rebuild_io_cv, NULL, CV_DEFAULT, NULL);
 
 	for (int t = 0; t < DTL_TYPES; t++) {
 		vd->vdev_dtl[t] = range_tree_create(NULL, RANGE_SEG64, NULL, 0,
@@ -600,7 +644,7 @@ vdev_alloc(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id,
 {
 	vdev_ops_t *ops;
 	char *type;
-	uint64_t guid = 0, islog, nparity;
+	uint64_t guid = 0, islog;
 	vdev_t *vd;
 	vdev_indirect_config_t *vic;
 	char *tmp = NULL;
@@ -657,48 +701,13 @@ vdev_alloc(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id,
 	if (ops == &vdev_hole_ops && spa_version(spa) < SPA_VERSION_HOLES)
 		return (SET_ERROR(ENOTSUP));
 
-	/*
-	 * Set the nparity property for RAID-Z vdevs.
-	 */
-	nparity = -1ULL;
-	if (ops == &vdev_raidz_ops) {
-		if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY,
-		    &nparity) == 0) {
-			if (nparity == 0 || nparity > VDEV_RAIDZ_MAXPARITY)
-				return (SET_ERROR(EINVAL));
-			/*
-			 * Previous versions could only support 1 or 2 parity
-			 * device.
-			 */
-			if (nparity > 1 &&
-			    spa_version(spa) < SPA_VERSION_RAIDZ2)
-				return (SET_ERROR(ENOTSUP));
-			if (nparity > 2 &&
-			    spa_version(spa) < SPA_VERSION_RAIDZ3)
-				return (SET_ERROR(ENOTSUP));
-		} else {
-			/*
-			 * We require the parity to be specified for SPAs that
-			 * support multiple parity levels.
-			 */
-			if (spa_version(spa) >= SPA_VERSION_RAIDZ2)
-				return (SET_ERROR(EINVAL));
-			/*
-			 * Otherwise, we default to 1 parity device for RAID-Z.
-			 */
-			nparity = 1;
-		}
-	} else {
-		nparity = 0;
-	}
-	ASSERT(nparity != -1ULL);
-
-	/*
-	 * If creating a top-level vdev, check for allocation classes input
-	 */
 	if (top_level && alloctype == VDEV_ALLOC_ADD) {
 		char *bias;
 
+		/*
+		 * If creating a top-level vdev, check for allocation
+		 * classes input.
+		 */
 		if (nvlist_lookup_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS,
 		    &bias) == 0) {
 			alloc_bias = vdev_derive_alloc_bias(bias);
@@ -710,13 +719,32 @@ vdev_alloc(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id,
 				return (SET_ERROR(ENOTSUP));
 			}
 		}
+
+		/* spa_vdev_add() expects feature to be enabled */
+		if (ops == &vdev_draid_ops &&
+		    spa->spa_load_state != SPA_LOAD_CREATE &&
+		    !spa_feature_is_enabled(spa, SPA_FEATURE_DRAID)) {
+			return (SET_ERROR(ENOTSUP));
+		}
 	}
 
-	vd = vdev_alloc_common(spa, id, guid, ops);
-	vic = &vd->vdev_indirect_config;
+	/*
+	 * Initialize the vdev specific data.  This is done before calling
+	 * vdev_alloc_common() since it may fail and this simplifies the
+	 * error reporting and cleanup code paths.
+	 */
+	void *tsd = NULL;
+	if (ops->vdev_op_init != NULL) {
+		rc = ops->vdev_op_init(spa, nv, &tsd);
+		if (rc != 0) {
+			return (rc);
+		}
+	}
 
+	vd = vdev_alloc_common(spa, id, guid, ops);
+	vd->vdev_tsd = tsd;
 	vd->vdev_islog = islog;
-	vd->vdev_nparity = nparity;
+
 	if (top_level && alloc_bias != VDEV_BIAS_NONE)
 		vd->vdev_alloc_bias = alloc_bias;
 
@@ -756,6 +784,8 @@ vdev_alloc(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id,
 	    &vd->vdev_wholedisk) != 0)
 		vd->vdev_wholedisk = -1ULL;
 
+	vic = &vd->vdev_indirect_config;
+
 	ASSERT0(vic->vic_mapping_object);
 	(void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_INDIRECT_OBJECT,
 	    &vic->vic_mapping_object);
@@ -937,6 +967,9 @@ vdev_free(vdev_t *vd)
 	ASSERT(vd->vdev_child == NULL);
 	ASSERT(vd->vdev_guid_sum == vd->vdev_guid);
 
+	if (vd->vdev_ops->vdev_op_fini != NULL)
+		vd->vdev_ops->vdev_op_fini(vd);
+
 	/*
 	 * Discard allocation state.
 	 */
@@ -1028,9 +1061,7 @@ vdev_free(vdev_t *vd)
 	cv_destroy(&vd->vdev_trim_io_cv);
 
 	mutex_destroy(&vd->vdev_rebuild_lock);
-	mutex_destroy(&vd->vdev_rebuild_io_lock);
 	cv_destroy(&vd->vdev_rebuild_cv);
-	cv_destroy(&vd->vdev_rebuild_io_cv);
 
 	zfs_ratelimit_fini(&vd->vdev_delay_rl);
 	zfs_ratelimit_fini(&vd->vdev_checksum_rl);
@@ -1161,7 +1192,8 @@ vdev_top_update(vdev_t *tvd, vdev_t *vd)
 }
 
 /*
- * Add a mirror/replacing vdev above an existing vdev.
+ * Add a mirror/replacing vdev above an existing vdev.  There is no need to
+ * call .vdev_op_init() since mirror/replacing vdevs do not have private state.
  */
 vdev_t *
 vdev_add_parent(vdev_t *cvd, vdev_ops_t *ops)
@@ -1296,6 +1328,10 @@ vdev_metaslab_group_create(vdev_t *vd)
 				spa->spa_max_ashift = vd->vdev_ashift;
 			if (vd->vdev_ashift < spa->spa_min_ashift)
 				spa->spa_min_ashift = vd->vdev_ashift;
+
+			uint64_t min_alloc = vdev_get_min_alloc(vd);
+			if (min_alloc < spa->spa_min_alloc)
+				spa->spa_min_alloc = min_alloc;
 		}
 	}
 }
@@ -1622,39 +1658,67 @@ vdev_uses_zvols(vdev_t *vd)
 	return (B_FALSE);
 }
 
-void
-vdev_open_children(vdev_t *vd)
+/*
+ * Returns B_TRUE if the passed child should be opened.
+ */
+static boolean_t
+vdev_default_open_children_func(vdev_t *vd)
+{
+	return (B_TRUE);
+}
+
+/*
+ * Open the requested child vdevs.  If any of the leaf vdevs are using
+ * a ZFS volume then do the opens in a single thread.  This avoids a
+ * deadlock when the current thread is holding the spa_namespace_lock.
+ */
+static void
+vdev_open_children_impl(vdev_t *vd, vdev_open_children_func_t *open_func)
 {
-	taskq_t *tq;
 	int children = vd->vdev_children;
 
-	/*
-	 * in order to handle pools on top of zvols, do the opens
-	 * in a single thread so that the same thread holds the
-	 * spa_namespace_lock
-	 */
-	if (vdev_uses_zvols(vd)) {
-retry_sync:
-		for (int c = 0; c < children; c++)
-			vd->vdev_child[c]->vdev_open_error =
-			    vdev_open(vd->vdev_child[c]);
-	} else {
-		tq = taskq_create("vdev_open", children, minclsyspri,
-		    children, children, TASKQ_PREPOPULATE);
-		if (tq == NULL)
-			goto retry_sync;
+	taskq_t *tq = taskq_create("vdev_open", children, minclsyspri,
+	    children, children, TASKQ_PREPOPULATE);
+	vd->vdev_nonrot = B_TRUE;
 
-		for (int c = 0; c < children; c++)
+	for (int c = 0; c < children; c++) {
+		vdev_t *cvd = vd->vdev_child[c];
+
+		if (open_func(cvd) == B_FALSE)
+			continue;
+
+		if (tq == NULL || vdev_uses_zvols(vd)) {
+			cvd->vdev_open_error = vdev_open(cvd);
+		} else {
 			VERIFY(taskq_dispatch(tq, vdev_open_child,
-			    vd->vdev_child[c], TQ_SLEEP) != TASKQID_INVALID);
+			    cvd, TQ_SLEEP) != TASKQID_INVALID);
+		}
 
+		vd->vdev_nonrot &= cvd->vdev_nonrot;
+	}
+
+	if (tq != NULL) {
+		taskq_wait(tq);
 		taskq_destroy(tq);
 	}
+}
 
-	vd->vdev_nonrot = B_TRUE;
+/*
+ * Open all child vdevs.
+ */
+void
+vdev_open_children(vdev_t *vd)
+{
+	vdev_open_children_impl(vd, vdev_default_open_children_func);
+}
 
-	for (int c = 0; c < children; c++)
-		vd->vdev_nonrot &= vd->vdev_child[c]->vdev_nonrot;
+/*
+ * Conditionally open a subset of child vdevs.
+ */
+void
+vdev_open_children_subset(vdev_t *vd, vdev_open_children_func_t *open_func)
+{
+	vdev_open_children_impl(vd, open_func);
 }
 
 /*
@@ -1953,6 +2017,16 @@ vdev_open(vdev_t *vd)
 	}
 
 	/*
+	 * Track the the minimum allocation size.
+	 */
+	if (vd->vdev_top == vd && vd->vdev_ashift != 0 &&
+	    vd->vdev_islog == 0 && vd->vdev_aux == NULL) {
+		uint64_t min_alloc = vdev_get_min_alloc(vd);
+		if (min_alloc < spa->spa_min_alloc)
+			spa->spa_min_alloc = min_alloc;
+	}
+
+	/*
 	 * If this is a leaf vdev, assess whether a resilver is needed.
 	 * But don't do this if we are doing a reopen for a scrub, since
 	 * this would just restart the scrub we are already doing.
@@ -2278,7 +2352,9 @@ vdev_close(vdev_t *vd)
 	vdev_t *pvd = vd->vdev_parent;
 	spa_t *spa __maybe_unused = vd->vdev_spa;
 
-	ASSERT(spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL);
+	ASSERT(vd != NULL);
+	ASSERT(vd->vdev_open_thread == curthread ||
+	    spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL);
 
 	/*
 	 * If our parent is reopening, then we are as well, unless we are
@@ -2606,10 +2682,26 @@ vdev_dtl_empty(vdev_t *vd, vdev_dtl_type_t t)
 }
 
 /*
- * Returns B_TRUE if vdev determines offset needs to be resilvered.
+ * Check if the txg falls within the range which must be
+ * resilvered.  DVAs outside this range can always be skipped.
+ */
+boolean_t
+vdev_default_need_resilver(vdev_t *vd, const dva_t *dva, size_t psize,
+    uint64_t phys_birth)
+{
+	/* Set by sequential resilver. */
+	if (phys_birth == TXG_UNKNOWN)
+		return (B_TRUE);
+
+	return (vdev_dtl_contains(vd, DTL_PARTIAL, phys_birth, 1));
+}
+
+/*
+ * Returns B_TRUE if the vdev determines the DVA needs to be resilvered.
  */
 boolean_t
-vdev_dtl_need_resilver(vdev_t *vd, uint64_t offset, size_t psize)
+vdev_dtl_need_resilver(vdev_t *vd, const dva_t *dva, size_t psize,
+    uint64_t phys_birth)
 {
 	ASSERT(vd != vd->vdev_spa->spa_root_vdev);
 
@@ -2617,7 +2709,8 @@ vdev_dtl_need_resilver(vdev_t *vd, uint64_t offset, size_t psize)
 	    vd->vdev_ops->vdev_op_leaf)
 		return (B_TRUE);
 
-	return (vd->vdev_ops->vdev_op_need_resilver(vd, offset, psize));
+	return (vd->vdev_ops->vdev_op_need_resilver(vd, dva, psize,
+	    phys_birth));
 }
 
 /*
@@ -2862,8 +2955,8 @@ vdev_dtl_reassess(vdev_t *vd, uint64_t txg, uint64_t scrub_txg,
 			continue;			/* leaf vdevs only */
 		if (t == DTL_PARTIAL)
 			minref = 1;			/* i.e. non-zero */
-		else if (vd->vdev_nparity != 0)
-			minref = vd->vdev_nparity + 1;	/* RAID-Z */
+		else if (vdev_get_nparity(vd) != 0)
+			minref = vdev_get_nparity(vd) + 1; /* RAID-Z, dRAID */
 		else
 			minref = vd->vdev_children;	/* any kind of mirror */
 		space_reftree_create(&reftree);
@@ -3727,6 +3820,9 @@ top:
 	if (!vd->vdev_ops->vdev_op_leaf)
 		return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENOTSUP)));
 
+	if (vd->vdev_ops == &vdev_draid_spare_ops)
+		return (spa_vdev_state_exit(spa, NULL, ENOTSUP));
+
 	tvd = vd->vdev_top;
 	mg = tvd->vdev_mg;
 	generation = spa->spa_config_generation + 1;
@@ -3971,6 +4067,13 @@ vdev_accessible(vdev_t *vd, zio_t *zio)
 static void
 vdev_get_child_stat(vdev_t *cvd, vdev_stat_t *vs, vdev_stat_t *cvs)
 {
+	/*
+	 * Exclude the dRAID spare when aggregating to avoid double counting
+	 * the ops and bytes.  These IOs are counted by the physical leaves.
+	 */
+	if (cvd->vdev_ops == &vdev_draid_spare_ops)
+		return;
+
 	for (int t = 0; t < VS_ZIO_TYPES; t++) {
 		vs->vs_ops[t] += cvs->vs_ops[t];
 		vs->vs_bytes[t] += cvs->vs_bytes[t];
@@ -4063,7 +4166,6 @@ vdev_get_stats_ex_impl(vdev_t *vd, vdev_stat_t *vs, vdev_stat_ex_t *vsx)
 				vdev_get_child_stat(cvd, vs, cvs);
 			if (vsx)
 				vdev_get_child_stat_ex(cvd, vsx, cvsx);
-
 		}
 	} else {
 		/*
@@ -4248,7 +4350,9 @@ vdev_stat_update(zio_t *zio, uint64_t psize)
 
 			/*
 			 * Repair is the result of a rebuild issued by the
-			 * rebuild thread (vdev_rebuild_thread).
+			 * rebuild thread (vdev_rebuild_thread).  To avoid
+			 * double counting repaired bytes the virtual dRAID
+			 * spare vdev is excluded from the processed bytes.
 			 */
 			if (zio->io_priority == ZIO_PRIORITY_REBUILD) {
 				vdev_t *tvd = vd->vdev_top;
@@ -4256,8 +4360,10 @@ vdev_stat_update(zio_t *zio, uint64_t psize)
 				vdev_rebuild_phys_t *vrp = &vr->vr_rebuild_phys;
 				uint64_t *rebuilt = &vrp->vrp_bytes_rebuilt;
 
-				if (vd->vdev_ops->vdev_op_leaf)
+				if (vd->vdev_ops->vdev_op_leaf &&
+				    vd->vdev_ops != &vdev_draid_spare_ops) {
 					atomic_add_64(rebuilt, psize);
+				}
 				vs->vs_rebuild_processed += psize;
 			}
 
@@ -4981,31 +5087,42 @@ vdev_clear_resilver_deferred(vdev_t *vd, dmu_tx_t *tx)
 	    vdev_resilver_needed(vd, NULL, NULL));
 }
 
+boolean_t
+vdev_xlate_is_empty(range_seg64_t *rs)
+{
+	return (rs->rs_start == rs->rs_end);
+}
+
 /*
- * Translate a logical range to the physical range for the specified vdev_t.
- * This function is initially called with a leaf vdev and will walk each
- * parent vdev until it reaches a top-level vdev. Once the top-level is
- * reached the physical range is initialized and the recursive function
- * begins to unwind. As it unwinds it calls the parent's vdev specific
- * translation function to do the real conversion.
+ * Translate a logical range to the first contiguous physical range for the
+ * specified vdev_t.  This function is initially called with a leaf vdev and
+ * will walk each parent vdev until it reaches a top-level vdev. Once the
+ * top-level is reached the physical range is initialized and the recursive
+ * function begins to unwind. As it unwinds it calls the parent's vdev
+ * specific translation function to do the real conversion.
  */
 void
 vdev_xlate(vdev_t *vd, const range_seg64_t *logical_rs,
-    range_seg64_t *physical_rs)
+    range_seg64_t *physical_rs, range_seg64_t *remain_rs)
 {
 	/*
 	 * Walk up the vdev tree
 	 */
 	if (vd != vd->vdev_top) {
-		vdev_xlate(vd->vdev_parent, logical_rs, physical_rs);
+		vdev_xlate(vd->vdev_parent, logical_rs, physical_rs,
+		    remain_rs);
 	} else {
 		/*
-		 * We've reached the top-level vdev, initialize the
-		 * physical range to the logical range and start to
-		 * unwind.
+		 * We've reached the top-level vdev, initialize the physical
+		 * range to the logical range and set an empty remaining
+		 * range then start to unwind.
 		 */
 		physical_rs->rs_start = logical_rs->rs_start;
 		physical_rs->rs_end = logical_rs->rs_end;
+
+		remain_rs->rs_start = logical_rs->rs_start;
+		remain_rs->rs_end = logical_rs->rs_start;
+
 		return;
 	}
 
@@ -5015,16 +5132,40 @@ vdev_xlate(vdev_t *vd, const range_seg64_t *logical_rs,
 
 	/*
 	 * As this recursive function unwinds, translate the logical
-	 * range into its physical components by calling the
-	 * vdev specific translate function.
+	 * range into its physical and any remaining components by calling
+	 * the vdev specific translate function.
 	 */
 	range_seg64_t intermediate = { 0 };
-	pvd->vdev_ops->vdev_op_xlate(vd, physical_rs, &intermediate);
+	pvd->vdev_ops->vdev_op_xlate(vd, physical_rs, &intermediate, remain_rs);
 
 	physical_rs->rs_start = intermediate.rs_start;
 	physical_rs->rs_end = intermediate.rs_end;
 }
 
+void
+vdev_xlate_walk(vdev_t *vd, const range_seg64_t *logical_rs,
+    vdev_xlate_func_t *func, void *arg)
+{
+	range_seg64_t iter_rs = *logical_rs;
+	range_seg64_t physical_rs;
+	range_seg64_t remain_rs;
+
+	while (!vdev_xlate_is_empty(&iter_rs)) {
+
+		vdev_xlate(vd, &iter_rs, &physical_rs, &remain_rs);
+
+		/*
+		 * With raidz and dRAID, it's possible that the logical range
+		 * does not live on this leaf vdev. Only when there is a non-
+		 * zero physical size call the provided function.
+		 */
+		if (!vdev_xlate_is_empty(&physical_rs))
+			func(arg, &physical_rs);
+
+		iter_rs = remain_rs;
+	}
+}
+
 /*
  * Look at the vdev tree and determine whether any devices are currently being
  * replaced.
diff --git a/module/zfs/vdev_draid.c b/module/zfs/vdev_draid.c
new file mode 100644
index 000000000..6b7ad7021
--- /dev/null
+++ b/module/zfs/vdev_draid.c
@@ -0,0 +1,2984 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright (c) 2018 Intel Corporation.
+ * Copyright (c) 2020 by Lawrence Livermore National Security, LLC.
+ */
+
+#include <sys/zfs_context.h>
+#include <sys/spa.h>
+#include <sys/spa_impl.h>
+#include <sys/vdev_impl.h>
+#include <sys/vdev_draid.h>
+#include <sys/vdev_raidz.h>
+#include <sys/vdev_rebuild.h>
+#include <sys/abd.h>
+#include <sys/zio.h>
+#include <sys/nvpair.h>
+#include <sys/zio_checksum.h>
+#include <sys/fs/zfs.h>
+#include <sys/fm/fs/zfs.h>
+#include <zfs_fletcher.h>
+
+#ifdef ZFS_DEBUG
+#include <sys/vdev.h>	/* For vdev_xlate() in vdev_draid_io_verify() */
+#endif
+
+/*
+ * dRAID is a distributed spare implementation for ZFS. A dRAID vdev is
+ * comprised of multiple raidz redundancy groups which are spread over the
+ * dRAID children. To ensure an even distribution, and avoid hot spots, a
+ * permutation mapping is applied to the order of the dRAID children.
+ * This mixing effectively distributes the parity columns evenly over all
+ * of the disks in the dRAID.
+ *
+ * This is beneficial because it means when resilvering all of the disks
+ * can participate thereby increasing the available IOPs and bandwidth.
+ * Furthermore, by reserving a small fraction of each child's total capacity
+ * virtual distributed spare disks can be created. These spares similarly
+ * benefit from the performance gains of spanning all of the children. The
+ * consequence of which is that resilvering to a distributed spare can
+ * substantially reduce the time required to restore full parity to pool
+ * with a failed disks.
+ *
+ * === dRAID group layout ===
+ *
+ * First, let's define a "row" in the configuration to be a 16M chunk from
+ * each physical drive at the same offset. This is the minimum allowable
+ * size since it must be possible to store a full 16M block when there is
+ * only a single data column. Next, we define a "group" to be a set of
+ * sequential disks containing both the parity and data columns. We allow
+ * groups to span multiple rows in order to align any group size to any
+ * number of physical drives. Finally, a "slice" is comprised of the rows
+ * which contain the target number of groups. The permutation mappings
+ * are applied in a round robin fashion to each slice.
+ *
+ * Given D+P drives in a group (including parity drives) and C-S physical
+ * drives (not including the spare drives), we can distribute the groups
+ * across R rows without remainder by selecting the least common multiple
+ * of D+P and C-S as the number of groups; i.e. ngroups = LCM(D+P, C-S).
+ *
+ * In the example below, there are C=14 physical drives in the configuration
+ * with S=2 drives worth of spare capacity. Each group has a width of 9
+ * which includes D=8 data and P=1 parity drive. There are 4 groups and
+ * 3 rows per slice.  Each group has a size of 144M (16M * 9) and a slice
+ * size is 576M (144M * 4). When allocating from a dRAID each group is
+ * filled before moving on to the next as show in slice0 below.
+ *
+ *             data disks (8 data + 1 parity)          spares (2)
+ *     +===+===+===+===+===+===+===+===+===+===+===+===+===+===+
+ *  ^  | 2 | 6 | 1 | 11| 4 | 0 | 7 | 10| 8 | 9 | 13| 5 | 12| 3 | device map 0
+ *  |  +===+===+===+===+===+===+===+===+===+===+===+===+===+===+
+ *  |  |              group 0              |  group 1..|       |
+ *  |  +-----------------------------------+-----------+-------|
+ *  |  | 0   1   2   3   4   5   6   7   8 | 36  37  38|       |  r
+ *  |  | 9   10  11  12  13  14  15  16  17| 45  46  47|       |  o
+ *  |  | 18  19  20  21  22  23  24  25  26| 54  55  56|       |  w
+ *     | 27  28  29  30  31  32  33  34  35| 63  64  65|       |  0
+ *  s  +-----------------------+-----------------------+-------+
+ *  l  |       ..group 1       |        group 2..      |       |
+ *  i  +-----------------------+-----------------------+-------+
+ *  c  | 39  40  41  42  43  44| 72  73  74  75  76  77|       |  r
+ *  e  | 48  49  50  51  52  53| 81  82  83  84  85  86|       |  o
+ *  0  | 57  58  59  60  61  62| 90  91  92  93  94  95|       |  w
+ *     | 66  67  68  69  70  71| 99 100 101 102 103 104|       |  1
+ *  |  +-----------+-----------+-----------------------+-------+
+ *  |  |..group 2  |            group 3                |       |
+ *  |  +-----------+-----------+-----------------------+-------+
+ *  |  | 78  79  80|108 109 110 111 112 113 114 115 116|       |  r
+ *  |  | 87  88  89|117 118 119 120 121 122 123 124 125|       |  o
+ *  |  | 96  97  98|126 127 128 129 130 131 132 133 134|       |  w
+ *  v  |105 106 107|135 136 137 138 139 140 141 142 143|       |  2
+ *     +===+===+===+===+===+===+===+===+===+===+===+===+===+===+
+ *     | 9 | 11| 12| 2 | 4 | 1 | 3 | 0 | 10| 13| 8 | 5 | 6 | 7 | device map 1
+ *  s  +===+===+===+===+===+===+===+===+===+===+===+===+===+===+
+ *  l  |              group 4              |  group 5..|       | row 3
+ *  i  +-----------------------+-----------+-----------+-------|
+ *  c  |       ..group 5       |        group 6..      |       | row 4
+ *  e  +-----------+-----------+-----------------------+-------+
+ *  1  |..group 6  |            group 7                |       | row 5
+ *     +===+===+===+===+===+===+===+===+===+===+===+===+===+===+
+ *     | 3 | 5 | 10| 8 | 6 | 11| 12| 0 | 2 | 4 | 7 | 1 | 9 | 13| device map 2
+ *  s  +===+===+===+===+===+===+===+===+===+===+===+===+===+===+
+ *  l  |              group 8              |  group 9..|       | row 6
+ *  i  +-----------------------------------------------+-------|
+ *  c  |       ..group 9       |        group 10..     |       | row 7
+ *  e  +-----------------------+-----------------------+-------+
+ *  2  |..group 10 |            group 11               |       | row 8
+ *     +-----------+-----------------------------------+-------+
+ *
+ * This layout has several advantages over requiring that each row contain
+ * a whole number of groups.
+ *
+ * 1. The group count is not a relevant parameter when defining a dRAID
+ *    layout. Only the group width is needed, and *all* groups will have
+ *    the desired size.
+ *
+ * 2. All possible group widths (<= physical disk count) can be supported.
+ *
+ * 3. The logic within vdev_draid.c is simplified when the group width is
+ *    the same for all groups (although some of the logic around computing
+ *    permutation numbers and drive offsets is more complicated).
+ *
+ * N.B. The following array describes all valid dRAID permutation maps.
+ * Each row is used to generate a permutation map for a different number
+ * of children from a unique seed. The seeds were generated and carefully
+ * evaluated by the 'draid' utility in order to provide balanced mappings.
+ * In addition to the seed a checksum of the in-memory mapping is stored
+ * for verification.
+ *
+ * The imbalance ratio of a given failure (e.g. 5 disks wide, child 3 failed,
+ * with a given permutation map) is the ratio of the amounts of I/O that will
+ * be sent to the least and most busy disks when resilvering. The average
+ * imbalance ratio (of a given number of disks and permutation map) is the
+ * average of the ratios of all possible single and double disk failures.
+ *
+ * In order to achieve a low imbalance ratio the number of permutations in
+ * the mapping must be significantly larger than the number of children.
+ * For dRAID the number of permutations has been limited to 512 to minimize
+ * the map size. This does result in a gradually increasing imbalance ratio
+ * as seen in the table below. Increasing the number of permutations for
+ * larger child counts would reduce the imbalance ratio. However, in practice
+ * when there are a large number of children each child is responsible for
+ * fewer total IOs so it's less of a concern.
+ *
+ * Note these values are hard coded and must never be changed.  Existing
+ * pools depend on the same mapping always being generated in order to
+ * read and write from the correct locations.  Any change would make
+ * existing pools completely inaccessible.
+ */
+static const draid_map_t draid_maps[VDEV_DRAID_MAX_MAPS] = {
+	{   2, 256, 0x89ef3dabbcc7de37, 0x00000000433d433d },	/* 1.000 */
+	{   3, 256, 0x89a57f3de98121b4, 0x00000000bcd8b7b5 },	/* 1.000 */
+	{   4, 256, 0xc9ea9ec82340c885, 0x00000001819d7c69 },	/* 1.000 */
+	{   5, 256, 0xf46733b7f4d47dfd, 0x00000002a1648d74 },	/* 1.010 */
+	{   6, 256, 0x88c3c62d8585b362, 0x00000003d3b0c2c4 },	/* 1.031 */
+	{   7, 256, 0x3a65d809b4d1b9d5, 0x000000055c4183ee },	/* 1.043 */
+	{   8, 256, 0xe98930e3c5d2e90a, 0x00000006edfb0329 },	/* 1.059 */
+	{   9, 256, 0x5a5430036b982ccb, 0x00000008ceaf6934 },	/* 1.056 */
+	{  10, 256, 0x92bf389e9eadac74, 0x0000000b26668c09 },	/* 1.072 */
+	{  11, 256, 0x74ccebf1dcf3ae80, 0x0000000dd691358c },	/* 1.083 */
+	{  12, 256, 0x8847e41a1a9f5671, 0x00000010a0c63c8e },	/* 1.097 */
+	{  13, 256, 0x7481b56debf0e637, 0x0000001424121fe4 },	/* 1.100 */
+	{  14, 256, 0x559b8c44065f8967, 0x00000016ab2ff079 },	/* 1.121 */
+	{  15, 256, 0x34c49545a2ee7f01, 0x0000001a6028efd6 },	/* 1.103 */
+	{  16, 256, 0xb85f4fa81a7698f7, 0x0000001e95ff5e66 },	/* 1.111 */
+	{  17, 256, 0x6353e47b7e47aba0, 0x00000021a81fa0fe },	/* 1.133 */
+	{  18, 256, 0xaa549746b1cbb81c, 0x00000026f02494c9 },	/* 1.131 */
+	{  19, 256, 0x892e343f2f31d690, 0x00000029eb392835 },	/* 1.130 */
+	{  20, 256, 0x76914824db98cc3f, 0x0000003004f31a7c },	/* 1.141 */
+	{  21, 256, 0x4b3cbabf9cfb1d0f, 0x00000036363a2408 },	/* 1.139 */
+	{  22, 256, 0xf45c77abb4f035d4, 0x00000038dd0f3e84 },	/* 1.150 */
+	{  23, 256, 0x5e18bd7f3fd4baf4, 0x0000003f0660391f },	/* 1.174 */
+	{  24, 256, 0xa7b3a4d285d6503b, 0x000000443dfc9ff6 },	/* 1.168 */
+	{  25, 256, 0x56ac7dd967521f5a, 0x0000004b03a87eb7 },	/* 1.180 */
+	{  26, 256, 0x3a42dfda4eb880f7, 0x000000522c719bba },	/* 1.226 */
+	{  27, 256, 0xd200d2fc6b54bf60, 0x0000005760b4fdf5 },	/* 1.228 */
+	{  28, 256, 0xc52605bbd486c546, 0x0000005e00d8f74c },	/* 1.217 */
+	{  29, 256, 0xc761779e63cd762f, 0x00000067be3cd85c },	/* 1.239 */
+	{  30, 256, 0xca577b1e07f85ca5, 0x0000006f5517f3e4 },	/* 1.238 */
+	{  31, 256, 0xfd50a593c518b3d4, 0x0000007370e7778f },	/* 1.273 */
+	{  32, 512, 0xc6c87ba5b042650b, 0x000000f7eb08a156 },	/* 1.191 */
+	{  33, 512, 0xc3880d0c9d458304, 0x0000010734b5d160 },	/* 1.199 */
+	{  34, 512, 0xe920927e4d8b2c97, 0x00000118c1edbce0 },	/* 1.195 */
+	{  35, 512, 0x8da7fcda87bde316, 0x0000012a3e9f9110 },	/* 1.201 */
+	{  36, 512, 0xcf09937491514a29, 0x0000013bd6a24bef },	/* 1.194 */
+	{  37, 512, 0x9b5abbf345cbd7cc, 0x0000014b9d90fac3 },	/* 1.237 */
+	{  38, 512, 0x506312a44668d6a9, 0x0000015e1b5f6148 },	/* 1.242 */
+	{  39, 512, 0x71659ede62b4755f, 0x00000173ef029bcd },	/* 1.231 */
+	{  40, 512, 0xa7fde73fb74cf2d7, 0x000001866fb72748 },	/* 1.233 */
+	{  41, 512, 0x19e8b461a1dea1d3, 0x000001a046f76b23 },	/* 1.271 */
+	{  42, 512, 0x031c9b868cc3e976, 0x000001afa64c49d3 },	/* 1.263 */
+	{  43, 512, 0xbaa5125faa781854, 0x000001c76789e278 },	/* 1.270 */
+	{  44, 512, 0x4ed55052550d721b, 0x000001d800ccd8eb },	/* 1.281 */
+	{  45, 512, 0x0fd63ddbdff90677, 0x000001f08ad59ed2 },	/* 1.282 */
+	{  46, 512, 0x36d66546de7fdd6f, 0x000002016f09574b },	/* 1.286 */
+	{  47, 512, 0x99f997e7eafb69d7, 0x0000021e42e47cb6 },	/* 1.329 */
+	{  48, 512, 0xbecd9c2571312c5d, 0x000002320fe2872b },	/* 1.286 */
+	{  49, 512, 0xd97371329e488a32, 0x0000024cd73f2ca7 },	/* 1.322 */
+	{  50, 512, 0x30e9b136670749ee, 0x000002681c83b0e0 },	/* 1.335 */
+	{  51, 512, 0x11ad6bc8f47aaeb4, 0x0000027e9261b5d5 },	/* 1.305 */
+	{  52, 512, 0x68e445300af432c1, 0x0000029aa0eb7dbf },	/* 1.330 */
+	{  53, 512, 0x910fb561657ea98c, 0x000002b3dca04853 },	/* 1.365 */
+	{  54, 512, 0xd619693d8ce5e7a5, 0x000002cc280e9c97 },	/* 1.334 */
+	{  55, 512, 0x24e281f564dbb60a, 0x000002e9fa842713 },	/* 1.364 */
+	{  56, 512, 0x947a7d3bdaab44c5, 0x000003046680f72e },	/* 1.374 */
+	{  57, 512, 0x2d44fec9c093e0de, 0x00000324198ba810 },	/* 1.363 */
+	{  58, 512, 0x87743c272d29bb4c, 0x0000033ec48c9ac9 },	/* 1.401 */
+	{  59, 512, 0x96aa3b6f67f5d923, 0x0000034faead902c },	/* 1.392 */
+	{  60, 512, 0x94a4f1faf520b0d3, 0x0000037d713ab005 },	/* 1.360 */
+	{  61, 512, 0xb13ed3a272f711a2, 0x00000397368f3cbd },	/* 1.396 */
+	{  62, 512, 0x3b1b11805fa4a64a, 0x000003b8a5e2840c },	/* 1.453 */
+	{  63, 512, 0x4c74caad9172ba71, 0x000003d4be280290 },	/* 1.437 */
+	{  64, 512, 0x035ff643923dd29e, 0x000003fad6c355e1 },	/* 1.402 */
+	{  65, 512, 0x768e9171b11abd3c, 0x0000040eb07fed20 },	/* 1.459 */
+	{  66, 512, 0x75880e6f78a13ddd, 0x000004433d6acf14 },	/* 1.423 */
+	{  67, 512, 0x910b9714f698a877, 0x00000451ea65d5db },	/* 1.447 */
+	{  68, 512, 0x87f5db6f9fdcf5c7, 0x000004732169e3f7 },	/* 1.450 */
+	{  69, 512, 0x836d4968fbaa3706, 0x000004954068a380 },	/* 1.455 */
+	{  70, 512, 0xc567d73a036421ab, 0x000004bd7cb7bd3d },	/* 1.463 */
+	{  71, 512, 0x619df40f240b8fed, 0x000004e376c2e972 },	/* 1.463 */
+	{  72, 512, 0x42763a680d5bed8e, 0x000005084275c680 },	/* 1.452 */
+	{  73, 512, 0x5866f064b3230431, 0x0000052906f2c9ab },	/* 1.498 */
+	{  74, 512, 0x9fa08548b1621a44, 0x0000054708019247 },	/* 1.526 */
+	{  75, 512, 0xb6053078ce0fc303, 0x00000572cc5c72b0 },	/* 1.491 */
+	{  76, 512, 0x4a7aad7bf3890923, 0x0000058e987bc8e9 },	/* 1.470 */
+	{  77, 512, 0xe165613fd75b5a53, 0x000005c20473a211 },	/* 1.527 */
+	{  78, 512, 0x3ff154ac878163a6, 0x000005d659194bf3 },	/* 1.509 */
+	{  79, 512, 0x24b93ade0aa8a532, 0x0000060a201c4f8e },	/* 1.569 */
+	{  80, 512, 0xc18e2d14cd9bb554, 0x0000062c55cfe48c },	/* 1.555 */
+	{  81, 512, 0x98cc78302feb58b6, 0x0000066656a07194 },	/* 1.509 */
+	{  82, 512, 0xc6c5fd5a2abc0543, 0x0000067cff94fbf8 },	/* 1.596 */
+	{  83, 512, 0xa7962f514acbba21, 0x000006ab7b5afa2e },	/* 1.568 */
+	{  84, 512, 0xba02545069ddc6dc, 0x000006d19861364f },	/* 1.541 */
+	{  85, 512, 0x447c73192c35073e, 0x000006fce315ce35 },	/* 1.623 */
+	{  86, 512, 0x48beef9e2d42b0c2, 0x00000720a8e38b6b },	/* 1.620 */
+	{  87, 512, 0x4874cf98541a35e0, 0x00000758382a2273 },	/* 1.597 */
+	{  88, 512, 0xad4cf8333a31127a, 0x00000781e1651b1b },	/* 1.575 */
+	{  89, 512, 0x47ae4859d57888c1, 0x000007b27edbe5bc },	/* 1.627 */
+	{  90, 512, 0x06f7723cfe5d1891, 0x000007dc2a96d8eb },	/* 1.596 */
+	{  91, 512, 0xd4e44218d660576d, 0x0000080ac46f02d5 },	/* 1.622 */
+	{  92, 512, 0x7066702b0d5be1f2, 0x00000832c96d154e },	/* 1.695 */
+	{  93, 512, 0x011209b4f9e11fb9, 0x0000085eefda104c },	/* 1.605 */
+	{  94, 512, 0x47ffba30a0b35708, 0x00000899badc32dc },	/* 1.625 */
+	{  95, 512, 0x1a95a6ac4538aaa8, 0x000008b6b69a42b2 },	/* 1.687 */
+	{  96, 512, 0xbda2b239bb2008eb, 0x000008f22d2de38a },	/* 1.621 */
+	{  97, 512, 0x7ffa0bea90355c6c, 0x0000092e5b23b816 },	/* 1.699 */
+	{  98, 512, 0x1d56ba34be426795, 0x0000094f482e5d1b },	/* 1.688 */
+	{  99, 512, 0x0aa89d45c502e93d, 0x00000977d94a98ce },	/* 1.642 */
+	{ 100, 512, 0x54369449f6857774, 0x000009c06c9b34cc },	/* 1.683 */
+	{ 101, 512, 0xf7d4dd8445b46765, 0x000009e5dc542259 },	/* 1.755 */
+	{ 102, 512, 0xfa8866312f169469, 0x00000a16b54eae93 },	/* 1.692 */
+	{ 103, 512, 0xd8a5aea08aef3ff9, 0x00000a381d2cbfe7 },	/* 1.747 */
+	{ 104, 512, 0x66bcd2c3d5f9ef0e, 0x00000a8191817be7 },	/* 1.751 */
+	{ 105, 512, 0x3fb13a47a012ec81, 0x00000ab562b9a254 },	/* 1.751 */
+	{ 106, 512, 0x43100f01c9e5e3ca, 0x00000aeee84c185f },	/* 1.726 */
+	{ 107, 512, 0xca09c50ccee2d054, 0x00000b1c359c047d },	/* 1.788 */
+	{ 108, 512, 0xd7176732ac503f9b, 0x00000b578bc52a73 },	/* 1.740 */
+	{ 109, 512, 0xed206e51f8d9422d, 0x00000b8083e0d960 },	/* 1.780 */
+	{ 110, 512, 0x17ead5dc6ba0dcd6, 0x00000bcfb1a32ca8 },	/* 1.836 */
+	{ 111, 512, 0x5f1dc21e38a969eb, 0x00000c0171becdd6 },	/* 1.778 */
+	{ 112, 512, 0xddaa973de33ec528, 0x00000c3edaba4b95 },	/* 1.831 */
+	{ 113, 512, 0x2a5eccd7735a3630, 0x00000c630664e7df },	/* 1.825 */
+	{ 114, 512, 0xafcccee5c0b71446, 0x00000cb65392f6e4 },	/* 1.826 */
+	{ 115, 512, 0x8fa30c5e7b147e27, 0x00000cd4db391e55 },	/* 1.843 */
+	{ 116, 512, 0x5afe0711fdfafd82, 0x00000d08cb4ec35d },	/* 1.826 */
+	{ 117, 512, 0x533a6090238afd4c, 0x00000d336f115d1b },	/* 1.803 */
+	{ 118, 512, 0x90cf11b595e39a84, 0x00000d8e041c2048 },	/* 1.857 */
+	{ 119, 512, 0x0d61a3b809444009, 0x00000dcb798afe35 },	/* 1.877 */
+	{ 120, 512, 0x7f34da0f54b0d114, 0x00000df3922664e1 },	/* 1.849 */
+	{ 121, 512, 0xa52258d5b72f6551, 0x00000e4d37a9872d },	/* 1.867 */
+	{ 122, 512, 0xc1de54d7672878db, 0x00000e6583a94cf6 },	/* 1.978 */
+	{ 123, 512, 0x1d03354316a414ab, 0x00000ebffc50308d },	/* 1.947 */
+	{ 124, 512, 0xcebdcc377665412c, 0x00000edee1997cea },	/* 1.865 */
+	{ 125, 512, 0x4ddd4c04b1a12344, 0x00000f21d64b373f },	/* 1.881 */
+	{ 126, 512, 0x64fc8f94e3973658, 0x00000f8f87a8896b },	/* 1.882 */
+	{ 127, 512, 0x68765f78034a334e, 0x00000fb8fe62197e },	/* 1.867 */
+	{ 128, 512, 0xaf36b871a303e816, 0x00000fec6f3afb1e },	/* 1.972 */
+	{ 129, 512, 0x2a4cbf73866c3a28, 0x00001027febfe4e5 },	/* 1.896 */
+	{ 130, 512, 0x9cb128aacdcd3b2f, 0x0000106aa8ac569d },	/* 1.965 */
+	{ 131, 512, 0x5511d41c55869124, 0x000010bbd755ddf1 },	/* 1.963 */
+	{ 132, 512, 0x42f92461937f284a, 0x000010fb8bceb3b5 },	/* 1.925 */
+	{ 133, 512, 0xe2d89a1cf6f1f287, 0x0000114cf5331e34 },	/* 1.862 */
+	{ 134, 512, 0xdc631a038956200e, 0x0000116428d2adc5 },	/* 2.042 */
+	{ 135, 512, 0xb2e5ac222cd236be, 0x000011ca88e4d4d2 },	/* 1.935 */
+	{ 136, 512, 0xbc7d8236655d88e7, 0x000011e39cb94e66 },	/* 2.005 */
+	{ 137, 512, 0x073e02d88d2d8e75, 0x0000123136c7933c },	/* 2.041 */
+	{ 138, 512, 0x3ddb9c3873166be0, 0x00001280e4ec6d52 },	/* 1.997 */
+	{ 139, 512, 0x7d3b1a845420e1b5, 0x000012c2e7cd6a44 },	/* 1.996 */
+	{ 140, 512, 0x60102308aa7b2a6c, 0x000012fc490e6c7d },	/* 2.053 */
+	{ 141, 512, 0xdb22bb2f9eb894aa, 0x00001343f5a85a1a },	/* 1.971 */
+	{ 142, 512, 0xd853f879a13b1606, 0x000013bb7d5f9048 },	/* 2.018 */
+	{ 143, 512, 0x001620a03f804b1d, 0x000013e74cc794fd },	/* 1.961 */
+	{ 144, 512, 0xfdb52dda76fbf667, 0x00001442d2f22480 },	/* 2.046 */
+	{ 145, 512, 0xa9160110f66e24ff, 0x0000144b899f9dbb },	/* 1.968 */
+	{ 146, 512, 0x77306a30379ae03b, 0x000014cb98eb1f81 },	/* 2.143 */
+	{ 147, 512, 0x14f5985d2752319d, 0x000014feab821fc9 },	/* 2.064 */
+	{ 148, 512, 0xa4b8ff11de7863f8, 0x0000154a0e60b9c9 },	/* 2.023 */
+	{ 149, 512, 0x44b345426455c1b3, 0x000015999c3c569c },	/* 2.136 */
+	{ 150, 512, 0x272677826049b46c, 0x000015c9697f4b92 },	/* 2.063 */
+	{ 151, 512, 0x2f9216e2cd74fe40, 0x0000162b1f7bbd39 },	/* 1.974 */
+	{ 152, 512, 0x706ae3e763ad8771, 0x00001661371c55e1 },	/* 2.210 */
+	{ 153, 512, 0xf7fd345307c2480e, 0x000016e251f28b6a },	/* 2.006 */
+	{ 154, 512, 0x6e94e3d26b3139eb, 0x000016f2429bb8c6 },	/* 2.193 */
+	{ 155, 512, 0x5458bbfbb781fcba, 0x0000173efdeca1b9 },	/* 2.163 */
+	{ 156, 512, 0xa80e2afeccd93b33, 0x000017bfdcb78adc },	/* 2.046 */
+	{ 157, 512, 0x1e4ccbb22796cf9d, 0x00001826fdcc39c9 },	/* 2.084 */
+	{ 158, 512, 0x8fba4b676aaa3663, 0x00001841a1379480 },	/* 2.264 */
+	{ 159, 512, 0xf82b843814b315fa, 0x000018886e19b8a3 },	/* 2.074 */
+	{ 160, 512, 0x7f21e920ecf753a3, 0x0000191812ca0ea7 },	/* 2.282 */
+	{ 161, 512, 0x48bb8ea2c4caa620, 0x0000192f310faccf },	/* 2.148 */
+	{ 162, 512, 0x5cdb652b4952c91b, 0x0000199e1d7437c7 },	/* 2.355 */
+	{ 163, 512, 0x6ac1ba6f78c06cd4, 0x000019cd11f82c70 },	/* 2.164 */
+	{ 164, 512, 0x9faf5f9ca2669a56, 0x00001a18d5431f6a },	/* 2.393 */
+	{ 165, 512, 0xaa57e9383eb01194, 0x00001a9e7d253d85 },	/* 2.178 */
+	{ 166, 512, 0x896967bf495c34d2, 0x00001afb8319b9fc },	/* 2.334 */
+	{ 167, 512, 0xdfad5f05de225f1b, 0x00001b3a59c3093b },	/* 2.266 */
+	{ 168, 512, 0xfd299a99f9f2abdd, 0x00001bb6f1a10799 },	/* 2.304 */
+	{ 169, 512, 0xdda239e798fe9fd4, 0x00001bfae0c9692d },	/* 2.218 */
+	{ 170, 512, 0x5fca670414a32c3e, 0x00001c22129dbcff },	/* 2.377 */
+	{ 171, 512, 0x1bb8934314b087de, 0x00001c955db36cd0 },	/* 2.155 */
+	{ 172, 512, 0xd96394b4b082200d, 0x00001cfc8619b7e6 },	/* 2.404 */
+	{ 173, 512, 0xb612a7735b1c8cbc, 0x00001d303acdd585 },	/* 2.205 */
+	{ 174, 512, 0x28e7430fe5875fe1, 0x00001d7ed5b3697d },	/* 2.359 */
+	{ 175, 512, 0x5038e89efdd981b9, 0x00001dc40ec35c59 },	/* 2.158 */
+	{ 176, 512, 0x075fd78f1d14db7c, 0x00001e31c83b4a2b },	/* 2.614 */
+	{ 177, 512, 0xc50fafdb5021be15, 0x00001e7cdac82fbc },	/* 2.239 */
+	{ 178, 512, 0xe6dc7572ce7b91c7, 0x00001edd8bb454fc },	/* 2.493 */
+	{ 179, 512, 0x21f7843e7beda537, 0x00001f3a8e019d6c },	/* 2.327 */
+	{ 180, 512, 0xc83385e20b43ec82, 0x00001f70735ec137 },	/* 2.231 */
+	{ 181, 512, 0xca818217dddb21fd, 0x0000201ca44c5a3c },	/* 2.237 */
+	{ 182, 512, 0xe6035defea48f933, 0x00002038e3346658 },	/* 2.691 */
+	{ 183, 512, 0x47262a4f953dac5a, 0x000020c2e554314e },	/* 2.170 */
+	{ 184, 512, 0xe24c7246260873ea, 0x000021197e618d64 },	/* 2.600 */
+	{ 185, 512, 0xeef6b57c9b58e9e1, 0x0000217ea48ecddc },	/* 2.391 */
+	{ 186, 512, 0x2becd3346e386142, 0x000021c496d4a5f9 },	/* 2.677 */
+	{ 187, 512, 0x63c6207bdf3b40a3, 0x0000220e0f2eec0c },	/* 2.410 */
+	{ 188, 512, 0x3056ce8989767d4b, 0x0000228eb76cd137 },	/* 2.776 */
+	{ 189, 512, 0x91af61c307cee780, 0x000022e17e2ea501 },	/* 2.266 */
+	{ 190, 512, 0xda359da225f6d54f, 0x00002358a2debc19 },	/* 2.717 */
+	{ 191, 512, 0x0a5f7a2a55607ba0, 0x0000238a79dac18c },	/* 2.474 */
+	{ 192, 512, 0x27bb75bf5224638a, 0x00002403a58e2351 },	/* 2.673 */
+	{ 193, 512, 0x1ebfdb94630f5d0f, 0x00002492a10cb339 },	/* 2.420 */
+	{ 194, 512, 0x6eae5e51d9c5f6fb, 0x000024ce4bf98715 },	/* 2.898 */
+	{ 195, 512, 0x08d903b4daedc2e0, 0x0000250d1e15886c },	/* 2.363 */
+	{ 196, 512, 0xc722a2f7fa7cd686, 0x0000258a99ed0c9e },	/* 2.747 */
+	{ 197, 512, 0x8f71faf0e54e361d, 0x000025dee11976f5 },	/* 2.531 */
+	{ 198, 512, 0x87f64695c91a54e7, 0x0000264e00a43da0 },	/* 2.707 */
+	{ 199, 512, 0xc719cbac2c336b92, 0x000026d327277ac1 },	/* 2.315 */
+	{ 200, 512, 0xe7e647afaf771ade, 0x000027523a5c44bf },	/* 3.012 */
+	{ 201, 512, 0x12d4b5c38ce8c946, 0x0000273898432545 },	/* 2.378 */
+	{ 202, 512, 0xf2e0cd4067bdc94a, 0x000027e47bb2c935 },	/* 2.969 */
+	{ 203, 512, 0x21b79f14d6d947d3, 0x0000281e64977f0d },	/* 2.594 */
+	{ 204, 512, 0x515093f952f18cd6, 0x0000289691a473fd },	/* 2.763 */
+	{ 205, 512, 0xd47b160a1b1022c8, 0x00002903e8b52411 },	/* 2.457 */
+	{ 206, 512, 0xc02fc96684715a16, 0x0000297515608601 },	/* 3.057 */
+	{ 207, 512, 0xef51e68efba72ed0, 0x000029ef73604804 },	/* 2.590 */
+	{ 208, 512, 0x9e3be6e5448b4f33, 0x00002a2846ed074b },	/* 3.047 */
+	{ 209, 512, 0x81d446c6d5fec063, 0x00002a92ca693455 },	/* 2.676 */
+	{ 210, 512, 0xff215de8224e57d5, 0x00002b2271fe3729 },	/* 2.993 */
+	{ 211, 512, 0xe2524d9ba8f69796, 0x00002b64b99c3ba2 },	/* 2.457 */
+	{ 212, 512, 0xf6b28e26097b7e4b, 0x00002bd768b6e068 },	/* 3.182 */
+	{ 213, 512, 0x893a487f30ce1644, 0x00002c67f722b4b2 },	/* 2.563 */
+	{ 214, 512, 0x386566c3fc9871df, 0x00002cc1cf8b4037 },	/* 3.025 */
+	{ 215, 512, 0x1e0ed78edf1f558a, 0x00002d3948d36c7f },	/* 2.730 */
+	{ 216, 512, 0xe3bc20c31e61f113, 0x00002d6d6b12e025 },	/* 3.036 */
+	{ 217, 512, 0xd6c3ad2e23021882, 0x00002deff7572241 },	/* 2.722 */
+	{ 218, 512, 0xb4a9f95cf0f69c5a, 0x00002e67d537aa36 },	/* 3.356 */
+	{ 219, 512, 0x6e98ed6f6c38e82f, 0x00002e9720626789 },	/* 2.697 */
+	{ 220, 512, 0x2e01edba33fddac7, 0x00002f407c6b0198 },	/* 2.979 */
+	{ 221, 512, 0x559d02e1f5f57ccc, 0x00002fb6a5ab4f24 },	/* 2.858 */
+	{ 222, 512, 0xac18f5a916adcd8e, 0x0000304ae1c5c57e },	/* 3.258 */
+	{ 223, 512, 0x15789fbaddb86f4b, 0x0000306f6e019c78 },	/* 2.693 */
+	{ 224, 512, 0xf4a9c36d5bc4c408, 0x000030da40434213 },	/* 3.259 */
+	{ 225, 512, 0xf640f90fd2727f44, 0x00003189ed37b90c },	/* 2.733 */
+	{ 226, 512, 0xb5313d390d61884a, 0x000031e152616b37 },	/* 3.235 */
+	{ 227, 512, 0x4bae6b3ce9160939, 0x0000321f40aeac42 },	/* 2.983 */
+	{ 228, 512, 0x838c34480f1a66a1, 0x000032f389c0f78e },	/* 3.308 */
+	{ 229, 512, 0xb1c4a52c8e3d6060, 0x0000330062a40284 },	/* 2.715 */
+	{ 230, 512, 0xe0f1110c6d0ed822, 0x0000338be435644f },	/* 3.540 */
+	{ 231, 512, 0x9f1a8ccdcea68d4b, 0x000034045a4e97e1 },	/* 2.779 */
+	{ 232, 512, 0x3261ed62223f3099, 0x000034702cfc401c },	/* 3.084 */
+	{ 233, 512, 0xf2191e2311022d65, 0x00003509dd19c9fc },	/* 2.987 */
+	{ 234, 512, 0xf102a395c2033abc, 0x000035654dc96fae },	/* 3.341 */
+	{ 235, 512, 0x11fe378f027906b6, 0x000035b5193b0264 },	/* 2.793 */
+	{ 236, 512, 0xf777f2c026b337aa, 0x000036704f5d9297 },	/* 3.518 */
+	{ 237, 512, 0x1b04e9c2ee143f32, 0x000036dfbb7af218 },	/* 2.962 */
+	{ 238, 512, 0x2fcec95266f9352c, 0x00003785c8df24a9 },	/* 3.196 */
+	{ 239, 512, 0xfe2b0e47e427dd85, 0x000037cbdf5da729 },	/* 2.914 */
+	{ 240, 512, 0x72b49bf2225f6c6d, 0x0000382227c15855 },	/* 3.408 */
+	{ 241, 512, 0x50486b43df7df9c7, 0x0000389b88be6453 },	/* 2.903 */
+	{ 242, 512, 0x5192a3e53181c8ab, 0x000038ddf3d67263 },	/* 3.778 */
+	{ 243, 512, 0xe9f5d8365296fd5e, 0x0000399f1c6c9e9c },	/* 3.026 */
+	{ 244, 512, 0xc740263f0301efa8, 0x00003a147146512d },	/* 3.347 */
+	{ 245, 512, 0x23cd0f2b5671e67d, 0x00003ab10bcc0d9d },	/* 3.212 */
+	{ 246, 512, 0x002ccc7e5cd41390, 0x00003ad6cd14a6c0 },	/* 3.482 */
+	{ 247, 512, 0x9aafb3c02544b31b, 0x00003b8cb8779fb0 },	/* 3.146 */
+	{ 248, 512, 0x72ba07a78b121999, 0x00003c24142a5a3f },	/* 3.626 */
+	{ 249, 512, 0x3d784aa58edfc7b4, 0x00003cd084817d99 },	/* 2.952 */
+	{ 250, 512, 0xaab750424d8004af, 0x00003d506a8e098e },	/* 3.463 */
+	{ 251, 512, 0x84403fcf8e6b5ca2, 0x00003d4c54c2aec4 },	/* 3.131 */
+	{ 252, 512, 0x71eb7455ec98e207, 0x00003e655715cf2c },	/* 3.538 */
+	{ 253, 512, 0xd752b4f19301595b, 0x00003ecd7b2ca5ac },	/* 2.974 */
+	{ 254, 512, 0xc4674129750499de, 0x00003e99e86d3e95 },	/* 3.843 */
+	{ 255, 512, 0x9772baff5cd12ef5, 0x00003f895c019841 },	/* 3.088 */
+};
+
+/*
+ * Verify the map is valid. Each device index must appear exactly
+ * once in every row, and the permutation array checksum must match.
+ */
+static int
+verify_perms(uint8_t *perms, uint64_t children, uint64_t nperms,
+    uint64_t checksum)
+{
+	int countssz = sizeof (uint16_t) * children;
+	uint16_t *counts = kmem_zalloc(countssz, KM_SLEEP);
+
+	for (int i = 0; i < nperms; i++) {
+		for (int j = 0; j < children; j++) {
+			uint8_t val = perms[(i * children) + j];
+
+			if (val >= children || counts[val] != i) {
+				kmem_free(counts, countssz);
+				return (EINVAL);
+			}
+
+			counts[val]++;
+		}
+	}
+
+	if (checksum != 0) {
+		int permssz = sizeof (uint8_t) * children * nperms;
+		zio_cksum_t cksum;
+
+		fletcher_4_native_varsize(perms, permssz, &cksum);
+
+		if (checksum != cksum.zc_word[0]) {
+			kmem_free(counts, countssz);
+			return (ECKSUM);
+		}
+	}
+
+	kmem_free(counts, countssz);
+
+	return (0);
+}
+
+/*
+ * Generate the permutation array for the draid_map_t.  These maps control
+ * the placement of all data in a dRAID.  Therefore it's critical that the
+ * seed always generates the same mapping.  We provide our own pseudo-random
+ * number generator for this purpose.
+ */
+int
+vdev_draid_generate_perms(const draid_map_t *map, uint8_t **permsp)
+{
+	VERIFY3U(map->dm_children, >=, VDEV_DRAID_MIN_CHILDREN);
+	VERIFY3U(map->dm_children, <=, VDEV_DRAID_MAX_CHILDREN);
+	VERIFY3U(map->dm_seed, !=, 0);
+	VERIFY3U(map->dm_nperms, !=, 0);
+	VERIFY3P(map->dm_perms, ==, NULL);
+
+#ifdef _KERNEL
+	/*
+	 * The kernel code always provides both a map_seed and checksum.
+	 * Only the tests/zfs-tests/cmd/draid/draid.c utility will provide
+	 * a zero checksum when generating new candidate maps.
+	 */
+	VERIFY3U(map->dm_checksum, !=, 0);
+#endif
+	uint64_t children = map->dm_children;
+	uint64_t nperms = map->dm_nperms;
+	int rowsz = sizeof (uint8_t) * children;
+	int permssz = rowsz * nperms;
+	uint8_t *perms;
+
+	/* Allocate the permutation array */
+	perms = vmem_alloc(permssz, KM_SLEEP);
+
+	/* Setup an initial row with a known pattern */
+	uint8_t *initial_row = kmem_alloc(rowsz, KM_SLEEP);
+	for (int i = 0; i < children; i++)
+		initial_row[i] = i;
+
+	uint64_t draid_seed[2] = { VDEV_DRAID_SEED, map->dm_seed };
+	uint8_t *current_row, *previous_row = initial_row;
+
+	/*
+	 * Perform a Fisher-Yates shuffle of each row using the previous
+	 * row as the starting point.  An initial_row with known pattern
+	 * is used as the input for the first row.
+	 */
+	for (int i = 0; i < nperms; i++) {
+		current_row = &perms[i * children];
+		memcpy(current_row, previous_row, rowsz);
+
+		for (int j = children - 1; j > 0; j--) {
+			uint64_t k = vdev_draid_rand(draid_seed) % (j + 1);
+			uint8_t val = current_row[j];
+			current_row[j] = current_row[k];
+			current_row[k] = val;
+		}
+
+		previous_row = current_row;
+	}
+
+	kmem_free(initial_row, rowsz);
+
+	int error = verify_perms(perms, children, nperms, map->dm_checksum);
+	if (error) {
+		vmem_free(perms, permssz);
+		return (error);
+	}
+
+	*permsp = perms;
+
+	return (0);
+}
+
+/*
+ * Lookup the fixed draid_map_t for the requested number of children.
+ */
+int
+vdev_draid_lookup_map(uint64_t children, const draid_map_t **mapp)
+{
+	for (int i = 0; i <= VDEV_DRAID_MAX_MAPS; i++) {
+		if (draid_maps[i].dm_children == children) {
+			*mapp = &draid_maps[i];
+			return (0);
+		}
+	}
+
+	return (ENOENT);
+}
+
+/*
+ * Lookup the permutation array and iteration id for the provided offset.
+ */
+static void
+vdev_draid_get_perm(vdev_draid_config_t *vdc, uint64_t pindex,
+    uint8_t **base, uint64_t *iter)
+{
+	uint64_t ncols = vdc->vdc_children;
+	uint64_t poff = pindex % (vdc->vdc_nperms * ncols);
+
+	*base = vdc->vdc_perms + (poff / ncols) * ncols;
+	*iter = poff % ncols;
+}
+
+static inline uint64_t
+vdev_draid_permute_id(vdev_draid_config_t *vdc,
+    uint8_t *base, uint64_t iter, uint64_t index)
+{
+	return ((base[index] + iter) % vdc->vdc_children);
+}
+
+/*
+ * Return the asize which is the psize rounded up to a full group width.
+ * i.e. vdev_draid_psize_to_asize().
+ */
+static uint64_t
+vdev_draid_asize(vdev_t *vd, uint64_t psize)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+	uint64_t ashift = vd->vdev_ashift;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	uint64_t rows = ((psize - 1) / (vdc->vdc_ndata << ashift)) + 1;
+	uint64_t asize = (rows * vdc->vdc_groupwidth) << ashift;
+
+	ASSERT3U(asize, !=, 0);
+	ASSERT3U(asize % (vdc->vdc_groupwidth), ==, 0);
+
+	return (asize);
+}
+
+/*
+ * Deflate the asize to the psize, this includes stripping parity.
+ */
+uint64_t
+vdev_draid_asize_to_psize(vdev_t *vd, uint64_t asize)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT0(asize % vdc->vdc_groupwidth);
+
+	return ((asize / vdc->vdc_groupwidth) * vdc->vdc_ndata);
+}
+
+/*
+ * Convert a logical offset to the corresponding group number.
+ */
+static uint64_t
+vdev_draid_offset_to_group(vdev_t *vd, uint64_t offset)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	return (offset / vdc->vdc_groupsz);
+}
+
+/*
+ * Convert a group number to the logical starting offset for that group.
+ */
+static uint64_t
+vdev_draid_group_to_offset(vdev_t *vd, uint64_t group)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	return (group * vdc->vdc_groupsz);
+}
+
+
+static void
+vdev_draid_map_free_vsd(zio_t *zio)
+{
+	raidz_map_t *rm = zio->io_vsd;
+
+	ASSERT0(rm->rm_freed);
+	rm->rm_freed = B_TRUE;
+
+	if (rm->rm_reports == 0) {
+		vdev_raidz_map_free(rm);
+	}
+}
+
+/*ARGSUSED*/
+static void
+vdev_draid_cksum_free(void *arg, size_t ignored)
+{
+	raidz_map_t *rm = arg;
+
+	ASSERT3U(rm->rm_reports, >, 0);
+
+	if (--rm->rm_reports == 0 && rm->rm_freed)
+		vdev_raidz_map_free(rm);
+}
+
+static void
+vdev_draid_cksum_finish(zio_cksum_report_t *zcr, const abd_t *good_data)
+{
+	raidz_map_t *rm = zcr->zcr_cbdata;
+	const size_t c = zcr->zcr_cbinfo;
+	uint64_t skip_size = zcr->zcr_sector;
+	uint64_t parity_size;
+	size_t x, offset, size;
+
+	if (good_data == NULL) {
+		zfs_ereport_finish_checksum(zcr, NULL, NULL, B_FALSE);
+		return;
+	}
+
+	/*
+	 * Detailed cksum reporting is currently only supported for single
+	 * row draid mappings, this covers the vast majority of zios. Only
+	 * a dRAID zio which spans groups will have multiple rows.
+	 */
+	if (rm->rm_nrows != 1) {
+		zfs_ereport_finish_checksum(zcr, NULL, NULL, B_FALSE);
+		return;
+	}
+
+	raidz_row_t *rr = rm->rm_row[0];
+	const abd_t *good = NULL;
+	const abd_t *bad = rr->rr_col[c].rc_abd;
+
+	if (c < rr->rr_firstdatacol) {
+		/*
+		 * The first time through, calculate the parity blocks for
+		 * the good data (this relies on the fact that the good
+		 * data never changes for a given logical zio)
+		 */
+		if (rr->rr_col[0].rc_gdata == NULL) {
+			abd_t *bad_parity[VDEV_DRAID_MAXPARITY];
+
+			/*
+			 * Set up the rr_col[]s to generate the parity for
+			 * good_data, first saving the parity bufs and
+			 * replacing them with buffers to hold the result.
+			 */
+			for (x = 0; x < rr->rr_firstdatacol; x++) {
+				bad_parity[x] = rr->rr_col[x].rc_abd;
+				rr->rr_col[x].rc_abd = rr->rr_col[x].rc_gdata =
+				    abd_alloc_sametype(rr->rr_col[x].rc_abd,
+				    rr->rr_col[x].rc_size);
+			}
+
+			/*
+			 * Fill in the data columns from good_data being
+			 * careful to pad short columns and empty columns
+			 * with a skip sector.
+			 */
+			uint64_t good_size = abd_get_size((abd_t *)good_data);
+
+			offset = 0;
+			for (; x < rr->rr_cols; x++) {
+				abd_put(rr->rr_col[x].rc_abd);
+
+				if (offset == good_size) {
+					/* empty data column (small write) */
+					rr->rr_col[x].rc_abd =
+					    abd_get_zeros(skip_size);
+				} else if (x < rr->rr_bigcols) {
+					/* this is a "big column" */
+					size = rr->rr_col[x].rc_size;
+					rr->rr_col[x].rc_abd =
+					    abd_get_offset_size(
+					    (abd_t *)good_data, offset, size);
+					offset += size;
+				} else {
+					/* short data column, add skip sector */
+					size = rr->rr_col[x].rc_size -skip_size;
+					rr->rr_col[x].rc_abd = abd_alloc(
+					    rr->rr_col[x].rc_size, B_TRUE);
+					abd_copy_off(rr->rr_col[x].rc_abd,
+					    (abd_t *)good_data, 0, offset,
+					    size);
+					abd_zero_off(rr->rr_col[x].rc_abd,
+					    size, skip_size);
+					offset += size;
+				}
+			}
+
+			/*
+			 * Construct the parity from the good data.
+			 */
+			vdev_raidz_generate_parity_row(rm, rr);
+
+			/* restore everything back to its original state */
+			for (x = 0; x < rr->rr_firstdatacol; x++)
+				rr->rr_col[x].rc_abd = bad_parity[x];
+
+			offset = 0;
+			for (x = rr->rr_firstdatacol; x < rr->rr_cols; x++) {
+				if (offset == good_size || x < rr->rr_bigcols)
+					abd_put(rr->rr_col[x].rc_abd);
+				else
+					abd_free(rr->rr_col[x].rc_abd);
+
+				rr->rr_col[x].rc_abd = abd_get_offset_size(
+				    rr->rr_abd_copy, offset,
+				    rr->rr_col[x].rc_size);
+				offset += rr->rr_col[x].rc_size;
+			}
+		}
+
+		ASSERT3P(rr->rr_col[c].rc_gdata, !=, NULL);
+		good = abd_get_offset_size(rr->rr_col[c].rc_gdata, 0,
+		    rr->rr_col[c].rc_size);
+	} else {
+		/* adjust good_data to point at the start of our column */
+		parity_size = size = rr->rr_col[0].rc_size;
+		if (c >= rr->rr_bigcols) {
+			size -= skip_size;
+			zcr->zcr_length = size;
+		}
+
+		/* empty column */
+		if (size == 0) {
+			zfs_ereport_finish_checksum(zcr, NULL, NULL, B_TRUE);
+			return;
+		}
+
+		offset = 0;
+		for (x = rr->rr_firstdatacol; x < c; x++) {
+			if (x < rr->rr_bigcols) {
+				offset += parity_size;
+			} else {
+				offset += parity_size - skip_size;
+			}
+		}
+
+		good = abd_get_offset_size((abd_t *)good_data, offset, size);
+	}
+
+	/* we drop the ereport if it ends up that the data was good */
+	zfs_ereport_finish_checksum(zcr, good, bad, B_TRUE);
+	abd_put((abd_t *)good);
+}
+
+/*
+ * Invoked indirectly by zfs_ereport_start_checksum(), called
+ * below when our read operation fails completely.  The main point
+ * is to keep a copy of everything we read from disk, so that at
+ * vdev_draid_cksum_finish() time we can compare it with the good data.
+ */
+static void
+vdev_draid_cksum_report(zio_t *zio, zio_cksum_report_t *zcr, void *arg)
+{
+	size_t c = (size_t)(uintptr_t)arg;
+	raidz_map_t *rm = zio->io_vsd;
+
+	/* set up the report and bump the refcount  */
+	zcr->zcr_cbdata = rm;
+	zcr->zcr_cbinfo = c;
+	zcr->zcr_finish = vdev_draid_cksum_finish;
+	zcr->zcr_free = vdev_draid_cksum_free;
+
+	rm->rm_reports++;
+	ASSERT3U(rm->rm_reports, >, 0);
+
+	if (rm->rm_row[0]->rr_abd_copy != NULL)
+		return;
+
+	/*
+	 * It's the first time we're called for this raidz_map_t, so we need
+	 * to copy the data aside; there's no guarantee that our zio's buffer
+	 * won't be re-used for something else.
+	 *
+	 * Our parity data is already in separate buffers, so there's no need
+	 * to copy them.  Furthermore, all columns should have been expanded
+	 * by vdev_draid_map_alloc_empty() when attempting reconstruction.
+	 */
+	for (int i = 0; i < rm->rm_nrows; i++) {
+		raidz_row_t *rr = rm->rm_row[i];
+		size_t offset = 0;
+		size_t size = 0;
+
+		for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+			ASSERT3U(rr->rr_col[c].rc_size, ==,
+			    rr->rr_col[0].rc_size);
+			size += rr->rr_col[c].rc_size;
+		}
+
+		rr->rr_abd_copy = abd_alloc_for_io(size, B_FALSE);
+
+		for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+			raidz_col_t *col = &rr->rr_col[c];
+			abd_t *tmp = abd_get_offset_size(rr->rr_abd_copy,
+			    offset, col->rc_size);
+
+			abd_copy(tmp, col->rc_abd, col->rc_size);
+
+			if (abd_is_gang(col->rc_abd))
+				abd_free(col->rc_abd);
+			else
+				abd_put(col->rc_abd);
+
+			col->rc_abd = tmp;
+			offset += col->rc_size;
+		}
+		ASSERT3U(offset, ==, size);
+	}
+}
+
+const zio_vsd_ops_t vdev_draid_vsd_ops = {
+	.vsd_free = vdev_draid_map_free_vsd,
+	.vsd_cksum_report = vdev_draid_cksum_report
+};
+
+/*
+ * Full stripe writes.  When writing, all columns (D+P) are required.  Parity
+ * is calculated over all the columns, including empty zero filled sectors,
+ * and each is written to disk.  While only the data columns are needed for
+ * a normal read, all of the columns are required for reconstruction when
+ * performing a sequential resilver.
+ *
+ * For "big columns" it's sufficient to map the correct range of the zio ABD.
+ * Partial columns require allocating a gang ABD in order to zero fill the
+ * empty sectors.  When the column is empty a zero filled sector must be
+ * mapped.  In all cases the data ABDs must be the same size as the parity
+ * ABDs (e.g. rc->rc_size == parity_size).
+ */
+static void
+vdev_draid_map_alloc_write(zio_t *zio, uint64_t abd_offset, raidz_row_t *rr)
+{
+	uint64_t skip_size = 1ULL << zio->io_vd->vdev_top->vdev_ashift;
+	uint64_t parity_size = rr->rr_col[0].rc_size;
+	uint64_t abd_off = abd_offset;
+
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE);
+	ASSERT3U(parity_size, ==, abd_get_size(rr->rr_col[0].rc_abd));
+
+	for (uint64_t c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		if (rc->rc_size == 0) {
+			/* empty data column (small write), add a skip sector */
+			ASSERT3U(skip_size, ==, parity_size);
+			rc->rc_abd = abd_get_zeros(skip_size);
+		} else if (rc->rc_size == parity_size) {
+			/* this is a "big column" */
+			rc->rc_abd = abd_get_offset_size(zio->io_abd,
+			    abd_off, rc->rc_size);
+		} else {
+			/* short data column, add a skip sector */
+			ASSERT3U(rc->rc_size + skip_size, ==, parity_size);
+			rc->rc_abd = abd_alloc_gang_abd();
+			abd_gang_add(rc->rc_abd, abd_get_offset_size(
+			    zio->io_abd, abd_off, rc->rc_size), B_TRUE);
+			abd_gang_add(rc->rc_abd, abd_get_zeros(skip_size),
+			    B_TRUE);
+		}
+
+		ASSERT3U(abd_get_size(rc->rc_abd), ==, parity_size);
+
+		abd_off += rc->rc_size;
+		rc->rc_size = parity_size;
+	}
+
+	IMPLY(abd_offset != 0, abd_off == zio->io_size);
+}
+
+/*
+ * Scrub/resilver reads.  In order to store the contents of the skip sectors
+ * an additional ABD is allocated.  The columns are handled in the same way
+ * as a full stripe write except instead of using the zero ABD the newly
+ * allocated skip ABD is used to back the skip sectors.  In all cases the
+ * data ABD must be the same size as the parity ABDs.
+ */
+static void
+vdev_draid_map_alloc_scrub(zio_t *zio, uint64_t abd_offset, raidz_row_t *rr)
+{
+	uint64_t skip_size = 1ULL << zio->io_vd->vdev_top->vdev_ashift;
+	uint64_t parity_size = rr->rr_col[0].rc_size;
+	uint64_t abd_off = abd_offset;
+	uint64_t skip_off = 0;
+
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
+	ASSERT3P(rr->rr_abd_empty, ==, NULL);
+
+	if (rr->rr_nempty > 0) {
+		rr->rr_abd_empty = abd_alloc_linear(rr->rr_nempty * skip_size,
+		    B_FALSE);
+	}
+
+	for (uint64_t c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		if (rc->rc_size == 0) {
+			/* empty data column (small read), add a skip sector */
+			ASSERT3U(skip_size, ==, parity_size);
+			ASSERT3U(rr->rr_nempty, !=, 0);
+			rc->rc_abd = abd_get_offset_size(rr->rr_abd_empty,
+			    skip_off, skip_size);
+			skip_off += skip_size;
+		} else if (rc->rc_size == parity_size) {
+			/* this is a "big column" */
+			rc->rc_abd = abd_get_offset_size(zio->io_abd,
+			    abd_off, rc->rc_size);
+		} else {
+			/* short data column, add a skip sector */
+			ASSERT3U(rc->rc_size + skip_size, ==, parity_size);
+			ASSERT3U(rr->rr_nempty, !=, 0);
+			rc->rc_abd = abd_alloc_gang_abd();
+			abd_gang_add(rc->rc_abd, abd_get_offset_size(
+			    zio->io_abd, abd_off, rc->rc_size), B_TRUE);
+			abd_gang_add(rc->rc_abd, abd_get_offset_size(
+			    rr->rr_abd_empty, skip_off, skip_size), B_TRUE);
+			skip_off += skip_size;
+		}
+
+		uint64_t abd_size = abd_get_size(rc->rc_abd);
+		ASSERT3U(abd_size, ==, abd_get_size(rr->rr_col[0].rc_abd));
+
+		/*
+		 * Increase rc_size so the skip ABD is included in subsequent
+		 * parity calculations.
+		 */
+		abd_off += rc->rc_size;
+		rc->rc_size = abd_size;
+	}
+
+	IMPLY(abd_offset != 0, abd_off == zio->io_size);
+	ASSERT3U(skip_off, ==, rr->rr_nempty * skip_size);
+}
+
+/*
+ * Normal reads.  In this common case only the columns containing data
+ * are read in to the zio ABDs.  Neither the parity columns or empty skip
+ * sectors are read unless the checksum fails verification.  In which case
+ * vdev_raidz_read_all() will call vdev_draid_map_alloc_empty() to expand
+ * the raid map in order to allow reconstruction using the parity data and
+ * skip sectors.
+ */
+static void
+vdev_draid_map_alloc_read(zio_t *zio, uint64_t abd_offset, raidz_row_t *rr)
+{
+	uint64_t abd_off = abd_offset;
+
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
+
+	for (uint64_t c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		if (rc->rc_size > 0) {
+			rc->rc_abd = abd_get_offset_size(zio->io_abd,
+			    abd_off, rc->rc_size);
+			abd_off += rc->rc_size;
+		}
+	}
+
+	IMPLY(abd_offset != 0, abd_off == zio->io_size);
+}
+
+/*
+ * Converts a normal "read" raidz_row_t to a "scrub" raidz_row_t. The key
+ * difference is that an ABD is allocated to back skip sectors so they may
+ * be read in to memory, verified, and repaired if needed.
+ */
+void
+vdev_draid_map_alloc_empty(zio_t *zio, raidz_row_t *rr)
+{
+	uint64_t skip_size = 1ULL << zio->io_vd->vdev_top->vdev_ashift;
+	uint64_t parity_size = rr->rr_col[0].rc_size;
+	uint64_t skip_off = 0;
+
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
+	ASSERT3P(rr->rr_abd_empty, ==, NULL);
+
+	if (rr->rr_nempty > 0) {
+		rr->rr_abd_empty = abd_alloc_linear(rr->rr_nempty * skip_size,
+		    B_FALSE);
+	}
+
+	for (uint64_t c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		if (rc->rc_size == 0) {
+			/* empty data column (small read), add a skip sector */
+			ASSERT3U(skip_size, ==, parity_size);
+			ASSERT3U(rr->rr_nempty, !=, 0);
+			ASSERT3P(rc->rc_abd, ==, NULL);
+			rc->rc_abd = abd_get_offset_size(rr->rr_abd_empty,
+			    skip_off, skip_size);
+			skip_off += skip_size;
+		} else if (rc->rc_size == parity_size) {
+			/* this is a "big column", nothing to add */
+			ASSERT3P(rc->rc_abd, !=, NULL);
+		} else {
+			/* short data column, add a skip sector */
+			ASSERT3U(rc->rc_size + skip_size, ==, parity_size);
+			ASSERT3U(rr->rr_nempty, !=, 0);
+			ASSERT3P(rc->rc_abd, !=, NULL);
+			ASSERT(!abd_is_gang(rc->rc_abd));
+			abd_t *read_abd = rc->rc_abd;
+			rc->rc_abd = abd_alloc_gang_abd();
+			abd_gang_add(rc->rc_abd, read_abd, B_TRUE);
+			abd_gang_add(rc->rc_abd, abd_get_offset_size(
+			    rr->rr_abd_empty, skip_off, skip_size), B_TRUE);
+			skip_off += skip_size;
+		}
+
+		/*
+		 * Increase rc_size so the empty ABD is included in subsequent
+		 * parity calculations.
+		 */
+		rc->rc_size = parity_size;
+	}
+
+	ASSERT3U(skip_off, ==, rr->rr_nempty * skip_size);
+}
+
+/*
+ * Given a logical address within a dRAID configuration, return the physical
+ * address on the first drive in the group that this address maps to
+ * (at position 'start' in permutation number 'perm').
+ */
+static uint64_t
+vdev_draid_logical_to_physical(vdev_t *vd, uint64_t logical_offset,
+    uint64_t *perm, uint64_t *start)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	/* b is the dRAID (parent) sector offset. */
+	uint64_t ashift = vd->vdev_top->vdev_ashift;
+	uint64_t b_offset = logical_offset >> ashift;
+
+	/*
+	 * The height of a row in units of the vdev's minimum sector size.
+	 * This is the amount of data written to each disk of each group
+	 * in a given permutation.
+	 */
+	uint64_t rowheight_sectors = VDEV_DRAID_ROWHEIGHT >> ashift;
+
+	/*
+	 * We cycle through a disk permutation every groupsz * ngroups chunk
+	 * of address space. Note that ngroups * groupsz must be a multiple
+	 * of the number of data drives (ndisks) in order to guarantee
+	 * alignment. So, for example, if our row height is 16MB, our group
+	 * size is 10, and there are 13 data drives in the draid, then ngroups
+	 * will be 13, we will change permutation every 2.08GB and each
+	 * disk will have 160MB of data per chunk.
+	 */
+	uint64_t groupwidth = vdc->vdc_groupwidth;
+	uint64_t ngroups = vdc->vdc_ngroups;
+	uint64_t ndisks = vdc->vdc_ndisks;
+
+	/*
+	 * groupstart is where the group this IO will land in "starts" in
+	 * the permutation array.
+	 */
+	uint64_t group = logical_offset / vdc->vdc_groupsz;
+	uint64_t groupstart = (group * groupwidth) % ndisks;
+	ASSERT3U(groupstart + groupwidth, <=, ndisks + groupstart);
+	*start = groupstart;
+
+	/* b_offset is the sector offset within a group chunk */
+	b_offset = b_offset % (rowheight_sectors * groupwidth);
+	ASSERT0(b_offset % groupwidth);
+
+	/*
+	 * Find the starting byte offset on each child vdev:
+	 * - within a permutation there are ngroups groups spread over the
+	 *   rows, where each row covers a slice portion of the disk
+	 * - each permutation has (groupwidth * ngroups) / ndisks rows
+	 * - so each permutation covers rows * slice portion of the disk
+	 * - so we need to find the row where this IO group target begins
+	 */
+	*perm = group / ngroups;
+	uint64_t row = (*perm * ((groupwidth * ngroups) / ndisks)) +
+	    (((group % ngroups) * groupwidth) / ndisks);
+
+	return (((rowheight_sectors * row) +
+	    (b_offset / groupwidth)) << ashift);
+}
+
+static uint64_t
+vdev_draid_map_alloc_row(zio_t *zio, raidz_row_t **rrp, uint64_t io_offset,
+    uint64_t abd_offset, uint64_t abd_size)
+{
+	vdev_t *vd = zio->io_vd;
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+	uint64_t ashift = vd->vdev_top->vdev_ashift;
+	uint64_t io_size = abd_size;
+	uint64_t io_asize = vdev_draid_asize(vd, io_size);
+	uint64_t group = vdev_draid_offset_to_group(vd, io_offset);
+	uint64_t start_offset = vdev_draid_group_to_offset(vd, group + 1);
+
+	/*
+	 * Limit the io_size to the space remaining in the group.  A second
+	 * row in the raidz_map_t is created for the remainder.
+	 */
+	if (io_offset + io_asize > start_offset) {
+		io_size = vdev_draid_asize_to_psize(vd,
+		    start_offset - io_offset);
+	}
+
+	/*
+	 * At most a block may span the logical end of one group and the start
+	 * of the next group. Therefore, at the end of a group the io_size must
+	 * span the group width evenly and the remainder must be aligned to the
+	 * start of the next group.
+	 */
+	IMPLY(abd_offset == 0 && io_size < zio->io_size,
+	    (io_asize >> ashift) % vdc->vdc_groupwidth == 0);
+	IMPLY(abd_offset != 0,
+	    vdev_draid_group_to_offset(vd, group) == io_offset);
+
+	/* Lookup starting byte offset on each child vdev */
+	uint64_t groupstart, perm;
+	uint64_t physical_offset = vdev_draid_logical_to_physical(vd,
+	    io_offset, &perm, &groupstart);
+
+	/*
+	 * If there is less than groupwidth drives available after the group
+	 * start, the group is going to wrap onto the next row. 'wrap' is the
+	 * group disk number that starts on the next row.
+	 */
+	uint64_t ndisks = vdc->vdc_ndisks;
+	uint64_t groupwidth = vdc->vdc_groupwidth;
+	uint64_t wrap = groupwidth;
+
+	if (groupstart + groupwidth > ndisks)
+		wrap = ndisks - groupstart;
+
+	/* The io size in units of the vdev's minimum sector size. */
+	const uint64_t psize = io_size >> ashift;
+
+	/*
+	 * "Quotient": The number of data sectors for this stripe on all but
+	 * the "big column" child vdevs that also contain "remainder" data.
+	 */
+	uint64_t q = psize / vdc->vdc_ndata;
+
+	/*
+	 * "Remainder": The number of partial stripe data sectors in this I/O.
+	 * This will add a sector to some, but not all, child vdevs.
+	 */
+	uint64_t r = psize - q * vdc->vdc_ndata;
+
+	/* The number of "big columns" - those which contain remainder data. */
+	uint64_t bc = (r == 0 ? 0 : r + vdc->vdc_nparity);
+	ASSERT3U(bc, <, groupwidth);
+
+	/* The total number of data and parity sectors for this I/O. */
+	uint64_t tot = psize + (vdc->vdc_nparity * (q + (r == 0 ? 0 : 1)));
+
+	raidz_row_t *rr;
+	rr = kmem_alloc(offsetof(raidz_row_t, rr_col[groupwidth]), KM_SLEEP);
+	rr->rr_cols = groupwidth;
+	rr->rr_scols = groupwidth;
+	rr->rr_bigcols = bc;
+	rr->rr_missingdata = 0;
+	rr->rr_missingparity = 0;
+	rr->rr_firstdatacol = vdc->vdc_nparity;
+	rr->rr_abd_copy = NULL;
+	rr->rr_abd_empty = NULL;
+#ifdef ZFS_DEBUG
+	rr->rr_offset = io_offset;
+	rr->rr_size = io_size;
+#endif
+	*rrp = rr;
+
+	uint8_t *base;
+	uint64_t iter, asize = 0;
+	vdev_draid_get_perm(vdc, perm, &base, &iter);
+	for (uint64_t i = 0; i < groupwidth; i++) {
+		raidz_col_t *rc = &rr->rr_col[i];
+		uint64_t c = (groupstart + i) % ndisks;
+
+		/* increment the offset if we wrap to the next row */
+		if (i == wrap)
+			physical_offset += VDEV_DRAID_ROWHEIGHT;
+
+		rc->rc_devidx = vdev_draid_permute_id(vdc, base, iter, c);
+		rc->rc_offset = physical_offset;
+		rc->rc_abd = NULL;
+		rc->rc_gdata = NULL;
+		rc->rc_orig_data = NULL;
+		rc->rc_error = 0;
+		rc->rc_tried = 0;
+		rc->rc_skipped = 0;
+		rc->rc_repair = 0;
+		rc->rc_need_orig_restore = B_FALSE;
+
+		if (q == 0 && i >= bc)
+			rc->rc_size = 0;
+		else if (i < bc)
+			rc->rc_size = (q + 1) << ashift;
+		else
+			rc->rc_size = q << ashift;
+
+		asize += rc->rc_size;
+	}
+
+	ASSERT3U(asize, ==, tot << ashift);
+	rr->rr_nempty = roundup(tot, groupwidth) - tot;
+	IMPLY(bc > 0, rr->rr_nempty == groupwidth - bc);
+
+	/* Allocate buffers for the parity columns */
+	for (uint64_t c = 0; c < rr->rr_firstdatacol; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+		rc->rc_abd = abd_alloc_linear(rc->rc_size, B_FALSE);
+	}
+
+	/*
+	 * Map buffers for data columns and allocate/map buffers for skip
+	 * sectors.  There are three distinct cases for dRAID which are
+	 * required to support sequential rebuild.
+	 */
+	if (zio->io_type == ZIO_TYPE_WRITE) {
+		vdev_draid_map_alloc_write(zio, abd_offset, rr);
+	} else if ((rr->rr_nempty > 0) &&
+	    (zio->io_flags & (ZIO_FLAG_SCRUB | ZIO_FLAG_RESILVER))) {
+		vdev_draid_map_alloc_scrub(zio, abd_offset, rr);
+	} else {
+		ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
+		vdev_draid_map_alloc_read(zio, abd_offset, rr);
+	}
+
+	return (io_size);
+}
+
+/*
+ * Allocate the raidz mapping to be applied to the dRAID I/O.  The parity
+ * calculations for dRAID are identical to raidz however there are a few
+ * differences in the layout.
+ *
+ * - dRAID always allocates a full stripe width. Any extra sectors due
+ *   this padding are zero filled and written to disk. They will be read
+ *   back during a scrub or repair operation since they are included in
+ *   the parity calculation. This property enables sequential resilvering.
+ *
+ * - When the block at the logical offset spans redundancy groups then two
+ *   rows are allocated in the raidz_map_t. One row resides at the end of
+ *   the first group and the other at the start of the following group.
+ */
+static raidz_map_t *
+vdev_draid_map_alloc(zio_t *zio)
+{
+	raidz_row_t *rr[2];
+	uint64_t abd_offset = 0;
+	uint64_t abd_size = zio->io_size;
+	uint64_t io_offset = zio->io_offset;
+	uint64_t size;
+	int nrows = 1;
+
+	size = vdev_draid_map_alloc_row(zio, &rr[0], io_offset,
+	    abd_offset, abd_size);
+	if (size < abd_size) {
+		vdev_t *vd = zio->io_vd;
+
+		io_offset += vdev_draid_asize(vd, size);
+		abd_offset += size;
+		abd_size -= size;
+		nrows++;
+
+		ASSERT3U(io_offset, ==, vdev_draid_group_to_offset(
+		    vd, vdev_draid_offset_to_group(vd, io_offset)));
+		ASSERT3U(abd_offset, <, zio->io_size);
+		ASSERT3U(abd_size, !=, 0);
+
+		size = vdev_draid_map_alloc_row(zio, &rr[1],
+		    io_offset, abd_offset, abd_size);
+		VERIFY3U(size, ==, abd_size);
+	}
+
+	raidz_map_t *rm;
+	rm = kmem_zalloc(offsetof(raidz_map_t, rm_row[nrows]), KM_SLEEP);
+	rm->rm_ops = vdev_raidz_math_get_ops();
+	rm->rm_nrows = nrows;
+	rm->rm_row[0] = rr[0];
+	if (nrows == 2)
+		rm->rm_row[1] = rr[1];
+
+	zio->io_vsd = rm;
+	zio->io_vsd_ops = &vdev_draid_vsd_ops;
+
+	return (rm);
+}
+
+/*
+ * Given an offset into a dRAID return the next group width aligned offset
+ * which can be used to start an allocation.
+ */
+static uint64_t
+vdev_draid_get_astart(vdev_t *vd, const uint64_t start)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	return (roundup(start, vdc->vdc_groupwidth << vd->vdev_ashift));
+}
+
+/*
+ * Allocatable space for dRAID is (children - nspares) * sizeof(smallest child)
+ * rounded down to the last full slice.  So each child must provide at least
+ * 1 / (children - nspares) of its asize.
+ */
+static uint64_t
+vdev_draid_min_asize(vdev_t *vd)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	return ((vd->vdev_min_asize + vdc->vdc_ndisks - 1) / (vdc->vdc_ndisks));
+}
+
+/*
+ * When using dRAID the minimum allocation size is determined by the number
+ * of data disks in the redundancy group.  Full stripes are always used.
+ */
+static uint64_t
+vdev_draid_min_alloc(vdev_t *vd)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	return (vdc->vdc_ndata << vd->vdev_ashift);
+}
+
+/*
+ * Returns true if the txg range does not exist on any leaf vdev.
+ *
+ * A dRAID spare does not fit into the DTL model. While it has child vdevs
+ * there is no redundancy among them, and the effective child vdev is
+ * determined by offset. Essentially we do a vdev_dtl_reassess() on the
+ * fly by replacing a dRAID spare with the child vdev under the offset.
+ * Note that it is a recursive process because the child vdev can be
+ * another dRAID spare and so on.
+ */
+boolean_t
+vdev_draid_missing(vdev_t *vd, uint64_t physical_offset, uint64_t txg,
+    uint64_t size)
+{
+	if (vd->vdev_ops == &vdev_spare_ops ||
+	    vd->vdev_ops == &vdev_replacing_ops) {
+		/*
+		 * Check all of the readable children, if any child
+		 * contains the txg range the data it is not missing.
+		 */
+		for (int c = 0; c < vd->vdev_children; c++) {
+			vdev_t *cvd = vd->vdev_child[c];
+
+			if (!vdev_readable(cvd))
+				continue;
+
+			if (!vdev_draid_missing(cvd, physical_offset,
+			    txg, size))
+				return (B_FALSE);
+		}
+
+		return (B_TRUE);
+	}
+
+	if (vd->vdev_ops == &vdev_draid_spare_ops) {
+		/*
+		 * When sequentially resilvering we don't have a proper
+		 * txg range so instead we must presume all txgs are
+		 * missing on this vdev until the resilver completes.
+		 */
+		if (vd->vdev_rebuild_txg != 0)
+			return (B_TRUE);
+
+		/*
+		 * DTL_MISSING is set for all prior txgs when a resilver
+		 * is started in spa_vdev_attach().
+		 */
+		if (vdev_dtl_contains(vd, DTL_MISSING, txg, size))
+			return (B_TRUE);
+
+		/*
+		 * Consult the DTL on the relevant vdev. Either a vdev
+		 * leaf or spare/replace mirror child may be returned so
+		 * we must recursively call vdev_draid_missing_impl().
+		 */
+		vd = vdev_draid_spare_get_child(vd, physical_offset);
+		if (vd == NULL)
+			return (B_TRUE);
+
+		return (vdev_draid_missing(vd, physical_offset,
+		    txg, size));
+	}
+
+	return (vdev_dtl_contains(vd, DTL_MISSING, txg, size));
+}
+
+/*
+ * Returns true if the txg is only partially replicated on the leaf vdevs.
+ */
+static boolean_t
+vdev_draid_partial(vdev_t *vd, uint64_t physical_offset, uint64_t txg,
+    uint64_t size)
+{
+	if (vd->vdev_ops == &vdev_spare_ops ||
+	    vd->vdev_ops == &vdev_replacing_ops) {
+		/*
+		 * Check all of the readable children, if any child is
+		 * missing the txg range then it is partially replicated.
+		 */
+		for (int c = 0; c < vd->vdev_children; c++) {
+			vdev_t *cvd = vd->vdev_child[c];
+
+			if (!vdev_readable(cvd))
+				continue;
+
+			if (vdev_draid_partial(cvd, physical_offset, txg, size))
+				return (B_TRUE);
+		}
+
+		return (B_FALSE);
+	}
+
+	if (vd->vdev_ops == &vdev_draid_spare_ops) {
+		/*
+		 * When sequentially resilvering we don't have a proper
+		 * txg range so instead we must presume all txgs are
+		 * missing on this vdev until the resilver completes.
+		 */
+		if (vd->vdev_rebuild_txg != 0)
+			return (B_TRUE);
+
+		/*
+		 * DTL_MISSING is set for all prior txgs when a resilver
+		 * is started in spa_vdev_attach().
+		 */
+		if (vdev_dtl_contains(vd, DTL_MISSING, txg, size))
+			return (B_TRUE);
+
+		/*
+		 * Consult the DTL on the relevant vdev. Either a vdev
+		 * leaf or spare/replace mirror child may be returned so
+		 * we must recursively call vdev_draid_missing_impl().
+		 */
+		vd = vdev_draid_spare_get_child(vd, physical_offset);
+		if (vd == NULL)
+			return (B_TRUE);
+
+		return (vdev_draid_partial(vd, physical_offset, txg, size));
+	}
+
+	return (vdev_dtl_contains(vd, DTL_MISSING, txg, size));
+}
+
+/*
+ * Determine if the vdev is readable at the given offset.
+ */
+boolean_t
+vdev_draid_readable(vdev_t *vd, uint64_t physical_offset)
+{
+	if (vd->vdev_ops == &vdev_draid_spare_ops) {
+		vd = vdev_draid_spare_get_child(vd, physical_offset);
+		if (vd == NULL)
+			return (B_FALSE);
+	}
+
+	if (vd->vdev_ops == &vdev_spare_ops ||
+	    vd->vdev_ops == &vdev_replacing_ops) {
+
+		for (int c = 0; c < vd->vdev_children; c++) {
+			vdev_t *cvd = vd->vdev_child[c];
+
+			if (!vdev_readable(cvd))
+				continue;
+
+			if (vdev_draid_readable(cvd, physical_offset))
+				return (B_TRUE);
+		}
+
+		return (B_FALSE);
+	}
+
+	return (vdev_readable(vd));
+}
+
+/*
+ * Returns the first distributed spare found under the provided vdev tree.
+ */
+static vdev_t *
+vdev_draid_find_spare(vdev_t *vd)
+{
+	if (vd->vdev_ops == &vdev_draid_spare_ops)
+		return (vd);
+
+	for (int c = 0; c < vd->vdev_children; c++) {
+		vdev_t *svd = vdev_draid_find_spare(vd->vdev_child[c]);
+		if (svd != NULL)
+			return (svd);
+	}
+
+	return (NULL);
+}
+
+/*
+ * Returns B_TRUE if the passed in vdev is currently "faulted".
+ * Faulted, in this context, means that the vdev represents a
+ * replacing or sparing vdev tree.
+ */
+static boolean_t
+vdev_draid_faulted(vdev_t *vd, uint64_t physical_offset)
+{
+	if (vd->vdev_ops == &vdev_draid_spare_ops) {
+		vd = vdev_draid_spare_get_child(vd, physical_offset);
+		if (vd == NULL)
+			return (B_FALSE);
+
+		/*
+		 * After resolving the distributed spare to a leaf vdev
+		 * check the parent to determine if it's "faulted".
+		 */
+		vd = vd->vdev_parent;
+	}
+
+	return (vd->vdev_ops == &vdev_replacing_ops ||
+	    vd->vdev_ops == &vdev_spare_ops);
+}
+
+/*
+ * Determine if the dRAID block at the logical offset is degraded.
+ * Used by sequential resilver.
+ */
+static boolean_t
+vdev_draid_group_degraded(vdev_t *vd, uint64_t offset)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+	ASSERT3U(vdev_draid_get_astart(vd, offset), ==, offset);
+
+	uint64_t groupstart, perm;
+	uint64_t physical_offset = vdev_draid_logical_to_physical(vd,
+	    offset, &perm, &groupstart);
+
+	uint8_t *base;
+	uint64_t iter;
+	vdev_draid_get_perm(vdc, perm, &base, &iter);
+
+	for (uint64_t i = 0; i < vdc->vdc_groupwidth; i++) {
+		uint64_t c = (groupstart + i) % vdc->vdc_ndisks;
+		uint64_t cid = vdev_draid_permute_id(vdc, base, iter, c);
+		vdev_t *cvd = vd->vdev_child[cid];
+
+		/* Group contains a faulted vdev. */
+		if (vdev_draid_faulted(cvd, physical_offset))
+			return (B_TRUE);
+
+		/*
+		 * Always check groups with active distributed spares
+		 * because any vdev failure in the pool will affect them.
+		 */
+		if (vdev_draid_find_spare(cvd) != NULL)
+			return (B_TRUE);
+	}
+
+	return (B_FALSE);
+}
+
+/*
+ * Determine if the txg is missing.  Used by healing resilver.
+ */
+static boolean_t
+vdev_draid_group_missing(vdev_t *vd, uint64_t offset, uint64_t txg,
+    uint64_t size)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+	ASSERT3U(vdev_draid_get_astart(vd, offset), ==, offset);
+
+	uint64_t groupstart, perm;
+	uint64_t physical_offset = vdev_draid_logical_to_physical(vd,
+	    offset, &perm, &groupstart);
+
+	uint8_t *base;
+	uint64_t iter;
+	vdev_draid_get_perm(vdc, perm, &base, &iter);
+
+	for (uint64_t i = 0; i < vdc->vdc_groupwidth; i++) {
+		uint64_t c = (groupstart + i) % vdc->vdc_ndisks;
+		uint64_t cid = vdev_draid_permute_id(vdc, base, iter, c);
+		vdev_t *cvd = vd->vdev_child[cid];
+
+		/* Transaction group is known to be partially replicated. */
+		if (vdev_draid_partial(cvd, physical_offset, txg, size))
+			return (B_TRUE);
+
+		/*
+		 * Always check groups with active distributed spares
+		 * because any vdev failure in the pool will affect them.
+		 */
+		if (vdev_draid_find_spare(cvd) != NULL)
+			return (B_TRUE);
+	}
+
+	return (B_FALSE);
+}
+
+/*
+ * Find the smallest child asize and largest sector size to calculate the
+ * available capacity.  Distributed spares are ignored since their capacity
+ * is also based of the minimum child size in the top-level dRAID.
+ */
+static void
+vdev_draid_calculate_asize(vdev_t *vd, uint64_t *asizep, uint64_t *max_asizep,
+    uint64_t *logical_ashiftp, uint64_t *physical_ashiftp)
+{
+	uint64_t logical_ashift = 0, physical_ashift = 0;
+	uint64_t asize = 0, max_asize = 0;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	for (int c = 0; c < vd->vdev_children; c++) {
+		vdev_t *cvd = vd->vdev_child[c];
+
+		if (cvd->vdev_ops == &vdev_draid_spare_ops)
+			continue;
+
+		asize = MIN(asize - 1, cvd->vdev_asize - 1) + 1;
+		max_asize = MIN(max_asize - 1, cvd->vdev_max_asize - 1) + 1;
+		logical_ashift = MAX(logical_ashift, cvd->vdev_ashift);
+		physical_ashift = MAX(physical_ashift,
+		    cvd->vdev_physical_ashift);
+	}
+
+	*asizep = asize;
+	*max_asizep = max_asize;
+	*logical_ashiftp = logical_ashift;
+	*physical_ashiftp = physical_ashift;
+}
+
+/*
+ * Open spare vdevs.
+ */
+static boolean_t
+vdev_draid_open_spares(vdev_t *vd)
+{
+	return (vd->vdev_ops == &vdev_draid_spare_ops ||
+	    vd->vdev_ops == &vdev_replacing_ops ||
+	    vd->vdev_ops == &vdev_spare_ops);
+}
+
+/*
+ * Open all children, excluding spares.
+ */
+static boolean_t
+vdev_draid_open_children(vdev_t *vd)
+{
+	return (!vdev_draid_open_spares(vd));
+}
+
+/*
+ * Open a top-level dRAID vdev.
+ */
+static int
+vdev_draid_open(vdev_t *vd, uint64_t *asize, uint64_t *max_asize,
+    uint64_t *logical_ashift, uint64_t *physical_ashift)
+{
+	vdev_draid_config_t *vdc =  vd->vdev_tsd;
+	uint64_t nparity = vdc->vdc_nparity;
+	int open_errors = 0;
+
+	if (nparity > VDEV_DRAID_MAXPARITY ||
+	    vd->vdev_children < nparity + 1) {
+		vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
+		return (SET_ERROR(EINVAL));
+	}
+
+	/*
+	 * First open the normal children then the distributed spares.  This
+	 * ordering is important to ensure the distributed spares calculate
+	 * the correct psize in the event that the dRAID vdevs were expanded.
+	 */
+	vdev_open_children_subset(vd, vdev_draid_open_children);
+	vdev_open_children_subset(vd, vdev_draid_open_spares);
+
+	/* Verify enough of the children are available to continue. */
+	for (int c = 0; c < vd->vdev_children; c++) {
+		if (vd->vdev_child[c]->vdev_open_error != 0) {
+			if ((++open_errors) > nparity) {
+				vd->vdev_stat.vs_aux = VDEV_AUX_NO_REPLICAS;
+				return (SET_ERROR(ENXIO));
+			}
+		}
+	}
+
+	/*
+	 * Allocatable capacity is the sum of the space on all children less
+	 * the number of distributed spares rounded down to last full row
+	 * and then to the last full group. An additional 32MB of scratch
+	 * space is reserved at the end of each child for use by the dRAID
+	 * expansion feature.
+	 */
+	uint64_t child_asize, child_max_asize;
+	vdev_draid_calculate_asize(vd, &child_asize, &child_max_asize,
+	    logical_ashift, physical_ashift);
+
+	/*
+	 * Should be unreachable since the minimum child size is 64MB, but
+	 * we want to make sure an underflow absolutely cannot occur here.
+	 */
+	if (child_asize < VDEV_DRAID_REFLOW_RESERVE ||
+	    child_max_asize < VDEV_DRAID_REFLOW_RESERVE) {
+		return (SET_ERROR(ENXIO));
+	}
+
+	child_asize = ((child_asize - VDEV_DRAID_REFLOW_RESERVE) /
+	    VDEV_DRAID_ROWHEIGHT) * VDEV_DRAID_ROWHEIGHT;
+	child_max_asize = ((child_max_asize - VDEV_DRAID_REFLOW_RESERVE) /
+	    VDEV_DRAID_ROWHEIGHT) * VDEV_DRAID_ROWHEIGHT;
+
+	*asize = (((child_asize * vdc->vdc_ndisks) / vdc->vdc_groupsz) *
+	    vdc->vdc_groupsz);
+	*max_asize = (((child_max_asize * vdc->vdc_ndisks) / vdc->vdc_groupsz) *
+	    vdc->vdc_groupsz);
+
+	return (0);
+}
+
+/*
+ * Close a top-level dRAID vdev.
+ */
+static void
+vdev_draid_close(vdev_t *vd)
+{
+	for (int c = 0; c < vd->vdev_children; c++) {
+		if (vd->vdev_child[c] != NULL)
+			vdev_close(vd->vdev_child[c]);
+	}
+}
+
+/*
+ * Return the maximum asize for a rebuild zio in the provided range
+ * given the following constraints.  A dRAID chunks may not:
+ *
+ * - Exceed the maximum allowed block size (SPA_MAXBLOCKSIZE), or
+ * - Span dRAID redundancy groups.
+ */
+static uint64_t
+vdev_draid_rebuild_asize(vdev_t *vd, uint64_t start, uint64_t asize,
+    uint64_t max_segment)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	uint64_t ashift = vd->vdev_ashift;
+	uint64_t ndata = vdc->vdc_ndata;
+	uint64_t psize = MIN(P2ROUNDUP(max_segment * ndata, 1 << ashift),
+	    SPA_MAXBLOCKSIZE);
+
+	ASSERT3U(vdev_draid_get_astart(vd, start), ==, start);
+	ASSERT3U(asize % (vdc->vdc_groupwidth << ashift), ==, 0);
+
+	/* Chunks must evenly span all data columns in the group. */
+	psize = (((psize >> ashift) / ndata) * ndata) << ashift;
+	uint64_t chunk_size = MIN(asize, vdev_psize_to_asize(vd, psize));
+
+	/* Reduce the chunk size to the group space remaining. */
+	uint64_t group = vdev_draid_offset_to_group(vd, start);
+	uint64_t left = vdev_draid_group_to_offset(vd, group + 1) - start;
+	chunk_size = MIN(chunk_size, left);
+
+	ASSERT3U(chunk_size % (vdc->vdc_groupwidth << ashift), ==, 0);
+	ASSERT3U(vdev_draid_offset_to_group(vd, start), ==,
+	    vdev_draid_offset_to_group(vd, start + chunk_size - 1));
+
+	return (chunk_size);
+}
+
+/*
+ * Align the start of the metaslab to the group width and slightly reduce
+ * its size to a multiple of the group width.  Since full stripe writes are
+ * required by dRAID this space is unallocable.  Furthermore, aligning the
+ * metaslab start is important for vdev initialize and TRIM which both operate
+ * on metaslab boundaries which vdev_xlate() expects to be aligned.
+ */
+static void
+vdev_draid_metaslab_init(vdev_t *vd, uint64_t *ms_start, uint64_t *ms_size)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+
+	uint64_t sz = vdc->vdc_groupwidth << vd->vdev_ashift;
+	uint64_t astart = vdev_draid_get_astart(vd, *ms_start);
+	uint64_t asize = ((*ms_size - (astart - *ms_start)) / sz) * sz;
+
+	*ms_start = astart;
+	*ms_size = asize;
+
+	ASSERT0(*ms_start % sz);
+	ASSERT0(*ms_size % sz);
+}
+
+/*
+ * Add virtual dRAID spares to the list of valid spares. In order to accomplish
+ * this the existing array must be freed and reallocated with the additional
+ * entries.
+ */
+int
+vdev_draid_spare_create(nvlist_t *nvroot, vdev_t *vd, uint64_t *ndraidp,
+    uint64_t next_vdev_id)
+{
+	uint64_t draid_nspares = 0;
+	uint64_t ndraid = 0;
+	int error;
+
+	for (uint64_t i = 0; i < vd->vdev_children; i++) {
+		vdev_t *cvd = vd->vdev_child[i];
+
+		if (cvd->vdev_ops == &vdev_draid_ops) {
+			vdev_draid_config_t *vdc = cvd->vdev_tsd;
+			draid_nspares += vdc->vdc_nspares;
+			ndraid++;
+		}
+	}
+
+	if (draid_nspares == 0) {
+		*ndraidp = ndraid;
+		return (0);
+	}
+
+	nvlist_t **old_spares, **new_spares;
+	uint_t old_nspares;
+	error = nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES,
+	    &old_spares, &old_nspares);
+	if (error)
+		old_nspares = 0;
+
+	/* Allocate memory and copy of the existing spares. */
+	new_spares = kmem_alloc(sizeof (nvlist_t *) *
+	    (draid_nspares + old_nspares), KM_SLEEP);
+	for (uint_t i = 0; i < old_nspares; i++)
+		new_spares[i] = fnvlist_dup(old_spares[i]);
+
+	/* Add new distributed spares to ZPOOL_CONFIG_SPARES. */
+	uint64_t n = old_nspares;
+	for (uint64_t vdev_id = 0; vdev_id < vd->vdev_children; vdev_id++) {
+		vdev_t *cvd = vd->vdev_child[vdev_id];
+		char path[64];
+
+		if (cvd->vdev_ops != &vdev_draid_ops)
+			continue;
+
+		vdev_draid_config_t *vdc = cvd->vdev_tsd;
+		uint64_t nspares = vdc->vdc_nspares;
+		uint64_t nparity = vdc->vdc_nparity;
+
+		for (uint64_t spare_id = 0; spare_id < nspares; spare_id++) {
+			bzero(path, sizeof (path));
+			(void) snprintf(path, sizeof (path) - 1,
+			    "%s%llu-%llu-%llu", VDEV_TYPE_DRAID,
+			    (u_longlong_t)nparity,
+			    (u_longlong_t)next_vdev_id + vdev_id,
+			    (u_longlong_t)spare_id);
+
+			nvlist_t *spare = fnvlist_alloc();
+			fnvlist_add_string(spare, ZPOOL_CONFIG_PATH, path);
+			fnvlist_add_string(spare, ZPOOL_CONFIG_TYPE,
+			    VDEV_TYPE_DRAID_SPARE);
+			fnvlist_add_uint64(spare, ZPOOL_CONFIG_TOP_GUID,
+			    cvd->vdev_guid);
+			fnvlist_add_uint64(spare, ZPOOL_CONFIG_SPARE_ID,
+			    spare_id);
+			fnvlist_add_uint64(spare, ZPOOL_CONFIG_IS_LOG, 0);
+			fnvlist_add_uint64(spare, ZPOOL_CONFIG_IS_SPARE, 1);
+			fnvlist_add_uint64(spare, ZPOOL_CONFIG_WHOLE_DISK, 1);
+			fnvlist_add_uint64(spare, ZPOOL_CONFIG_ASHIFT,
+			    cvd->vdev_ashift);
+
+			new_spares[n] = spare;
+			n++;
+		}
+	}
+
+	if (n > 0) {
+		(void) nvlist_remove_all(nvroot, ZPOOL_CONFIG_SPARES);
+		fnvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES,
+		    new_spares, n);
+	}
+
+	for (int i = 0; i < n; i++)
+		nvlist_free(new_spares[i]);
+
+	kmem_free(new_spares, sizeof (*new_spares) * n);
+	*ndraidp = ndraid;
+
+	return (0);
+}
+
+/*
+ * Determine if any portion of the provided block resides on a child vdev
+ * with a dirty DTL and therefore needs to be resilvered.
+ */
+static boolean_t
+vdev_draid_need_resilver(vdev_t *vd, const dva_t *dva, size_t psize,
+    uint64_t phys_birth)
+{
+	uint64_t offset = DVA_GET_OFFSET(dva);
+	uint64_t asize = vdev_draid_asize(vd, psize);
+
+	if (phys_birth == TXG_UNKNOWN) {
+		/*
+		 * Sequential resilver.  There is no meaningful phys_birth
+		 * for this block, we can only determine if block resides
+		 * in a degraded group in which case it must be resilvered.
+		 */
+		ASSERT3U(vdev_draid_offset_to_group(vd, offset), ==,
+		    vdev_draid_offset_to_group(vd, offset + asize - 1));
+
+		return (vdev_draid_group_degraded(vd, offset));
+	} else {
+		/*
+		 * Healing resilver.  TXGs not in DTL_PARTIAL are intact,
+		 * as are blocks in non-degraded groups.
+		 */
+		if (!vdev_dtl_contains(vd, DTL_PARTIAL, phys_birth, 1))
+			return (B_FALSE);
+
+		if (vdev_draid_group_missing(vd, offset, phys_birth, 1))
+			return (B_TRUE);
+
+		/* The block may span groups in which case check both. */
+		if (vdev_draid_offset_to_group(vd, offset) !=
+		    vdev_draid_offset_to_group(vd, offset + asize - 1)) {
+			if (vdev_draid_group_missing(vd,
+			    offset + asize, phys_birth, 1))
+				return (B_TRUE);
+		}
+
+		return (B_FALSE);
+	}
+}
+
+static boolean_t
+vdev_draid_rebuilding(vdev_t *vd)
+{
+	if (vd->vdev_ops->vdev_op_leaf && vd->vdev_rebuild_txg)
+		return (B_TRUE);
+
+	for (int i = 0; i < vd->vdev_children; i++) {
+		if (vdev_draid_rebuilding(vd->vdev_child[i])) {
+			return (B_TRUE);
+		}
+	}
+
+	return (B_FALSE);
+}
+
+static void
+vdev_draid_io_verify(vdev_t *vd, raidz_row_t *rr, int col)
+{
+#ifdef ZFS_DEBUG
+	range_seg64_t logical_rs, physical_rs, remain_rs;
+	logical_rs.rs_start = rr->rr_offset;
+	logical_rs.rs_end = logical_rs.rs_start +
+	    vdev_draid_asize(vd, rr->rr_size);
+
+	raidz_col_t *rc = &rr->rr_col[col];
+	vdev_t *cvd = vd->vdev_child[rc->rc_devidx];
+
+	vdev_xlate(cvd, &logical_rs, &physical_rs, &remain_rs);
+	ASSERT(vdev_xlate_is_empty(&remain_rs));
+	ASSERT3U(rc->rc_offset, ==, physical_rs.rs_start);
+	ASSERT3U(rc->rc_offset, <, physical_rs.rs_end);
+	ASSERT3U(rc->rc_offset + rc->rc_size, ==, physical_rs.rs_end);
+#endif
+}
+
+/*
+ * For write operations:
+ * 1. Generate the parity data
+ * 2. Create child zio write operations to each column's vdev, for both
+ *    data and parity.  A gang ABD is allocated by vdev_draid_map_alloc()
+ *    if a skip sector needs to be added to a column.
+ */
+static void
+vdev_draid_io_start_write(zio_t *zio, raidz_row_t *rr)
+{
+	vdev_t *vd = zio->io_vd;
+	raidz_map_t *rm = zio->io_vsd;
+
+	vdev_raidz_generate_parity_row(rm, rr);
+
+	for (int c = 0; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		/*
+		 * Empty columns are zero filled and included in the parity
+		 * calculation and therefore must be written.
+		 */
+		ASSERT3U(rc->rc_size, !=, 0);
+
+		/* Verify physical to logical translation */
+		vdev_draid_io_verify(vd, rr, c);
+
+		zio_nowait(zio_vdev_child_io(zio, NULL,
+		    vd->vdev_child[rc->rc_devidx], rc->rc_offset,
+		    rc->rc_abd, rc->rc_size, zio->io_type, zio->io_priority,
+		    0, vdev_raidz_child_done, rc));
+	}
+}
+
+/*
+ * For read operations:
+ * 1. The vdev_draid_map_alloc() function will create a minimal raidz
+ *    mapping for the read based on the zio->io_flags.  There are two
+ *    possible mappings either 1) a normal read, or 2) a scrub/resilver.
+ * 2. Create the zio read operations.  This will include all parity
+ *    columns and skip sectors for a scrub/resilver.
+ */
+static void
+vdev_draid_io_start_read(zio_t *zio, raidz_row_t *rr)
+{
+	vdev_t *vd = zio->io_vd;
+
+	/* Sequential rebuild must do IO at redundancy group boundary. */
+	IMPLY(zio->io_priority == ZIO_PRIORITY_REBUILD, rr->rr_nempty == 0);
+
+	/*
+	 * Iterate over the columns in reverse order so that we hit the parity
+	 * last.  Any errors along the way will force us to read the parity.
+	 * For scrub/resilver IOs which verify skip sectors, a gang ABD will
+	 * have been allocated to store them and rc->rc_size is increased.
+	 */
+	for (int c = rr->rr_cols - 1; c >= 0; c--) {
+		raidz_col_t *rc = &rr->rr_col[c];
+		vdev_t *cvd = vd->vdev_child[rc->rc_devidx];
+
+		if (!vdev_draid_readable(cvd, rc->rc_offset)) {
+			if (c >= rr->rr_firstdatacol)
+				rr->rr_missingdata++;
+			else
+				rr->rr_missingparity++;
+			rc->rc_error = SET_ERROR(ENXIO);
+			rc->rc_tried = 1;
+			rc->rc_skipped = 1;
+			continue;
+		}
+
+		if (vdev_draid_missing(cvd, rc->rc_offset, zio->io_txg, 1)) {
+			if (c >= rr->rr_firstdatacol)
+				rr->rr_missingdata++;
+			else
+				rr->rr_missingparity++;
+			rc->rc_error = SET_ERROR(ESTALE);
+			rc->rc_skipped = 1;
+			continue;
+		}
+
+		/*
+		 * Empty columns may be read during vdev_draid_io_done().
+		 * Only skip them after the readable and missing checks
+		 * verify they are available.
+		 */
+		if (rc->rc_size == 0) {
+			rc->rc_skipped = 1;
+			continue;
+		}
+
+		if (zio->io_flags & ZIO_FLAG_RESILVER) {
+			vdev_t *svd;
+
+			/*
+			 * If this child is a distributed spare then the
+			 * offset might reside on the vdev being replaced.
+			 * In which case this data must be written to the
+			 * new device.  Failure to do so would result in
+			 * checksum errors when the old device is detached
+			 * and the pool is scrubbed.
+			 */
+			if ((svd = vdev_draid_find_spare(cvd)) != NULL) {
+				svd = vdev_draid_spare_get_child(svd,
+				    rc->rc_offset);
+				if (svd && (svd->vdev_ops == &vdev_spare_ops ||
+				    svd->vdev_ops == &vdev_replacing_ops)) {
+					rc->rc_repair = 1;
+				}
+			}
+
+			/*
+			 * Always issue a repair IO to this child when its
+			 * a spare or replacing vdev with an active rebuild.
+			 */
+			if ((cvd->vdev_ops == &vdev_spare_ops ||
+			    cvd->vdev_ops == &vdev_replacing_ops) &&
+			    vdev_draid_rebuilding(cvd)) {
+				rc->rc_repair = 1;
+			}
+		}
+	}
+
+	/*
+	 * Either a parity or data column is missing this means a repair
+	 * may be attempted by vdev_draid_io_done().  Expand the raid map
+	 * to read in empty columns which are needed along with the parity
+	 * during reconstruction.
+	 */
+	if ((rr->rr_missingdata > 0 || rr->rr_missingparity > 0) &&
+	    rr->rr_nempty > 0 && rr->rr_abd_empty == NULL) {
+		vdev_draid_map_alloc_empty(zio, rr);
+	}
+
+	for (int c = rr->rr_cols - 1; c >= 0; c--) {
+		raidz_col_t *rc = &rr->rr_col[c];
+		vdev_t *cvd = vd->vdev_child[rc->rc_devidx];
+
+		if (rc->rc_error || rc->rc_size == 0)
+			continue;
+
+		if (c >= rr->rr_firstdatacol || rr->rr_missingdata > 0 ||
+		    (zio->io_flags & (ZIO_FLAG_SCRUB | ZIO_FLAG_RESILVER))) {
+			zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
+			    rc->rc_offset, rc->rc_abd, rc->rc_size,
+			    zio->io_type, zio->io_priority, 0,
+			    vdev_raidz_child_done, rc));
+		}
+	}
+}
+
+/*
+ * Start an IO operation to a dRAID vdev.
+ */
+static void
+vdev_draid_io_start(zio_t *zio)
+{
+	vdev_t *vd __maybe_unused = zio->io_vd;
+	raidz_map_t *rm;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+	ASSERT3U(zio->io_offset, ==, vdev_draid_get_astart(vd, zio->io_offset));
+
+	rm = vdev_draid_map_alloc(zio);
+
+	if (zio->io_type == ZIO_TYPE_WRITE) {
+		for (int i = 0; i < rm->rm_nrows; i++) {
+			vdev_draid_io_start_write(zio, rm->rm_row[i]);
+		}
+	} else {
+		ASSERT(zio->io_type == ZIO_TYPE_READ);
+
+		for (int i = 0; i < rm->rm_nrows; i++) {
+			vdev_draid_io_start_read(zio, rm->rm_row[i]);
+		}
+	}
+
+	zio_execute(zio);
+}
+
+/*
+ * Complete an IO operation on a dRAID vdev.  The raidz logic can be applied
+ * to dRAID since the layout is fully described by the raidz_map_t.
+ */
+static void
+vdev_draid_io_done(zio_t *zio)
+{
+	vdev_raidz_io_done(zio);
+}
+
+static void
+vdev_draid_state_change(vdev_t *vd, int faulted, int degraded)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+	ASSERT(vd->vdev_ops == &vdev_draid_ops);
+
+	if (faulted > vdc->vdc_nparity)
+		vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN,
+		    VDEV_AUX_NO_REPLICAS);
+	else if (degraded + faulted != 0)
+		vdev_set_state(vd, B_FALSE, VDEV_STATE_DEGRADED, VDEV_AUX_NONE);
+	else
+		vdev_set_state(vd, B_FALSE, VDEV_STATE_HEALTHY, VDEV_AUX_NONE);
+}
+
+static void
+vdev_draid_xlate(vdev_t *cvd, const range_seg64_t *logical_rs,
+    range_seg64_t *physical_rs, range_seg64_t *remain_rs)
+{
+	vdev_t *raidvd = cvd->vdev_parent;
+	ASSERT(raidvd->vdev_ops == &vdev_draid_ops);
+
+	vdev_draid_config_t *vdc = raidvd->vdev_tsd;
+	uint64_t ashift = raidvd->vdev_top->vdev_ashift;
+
+	/* Make sure the offsets are block-aligned */
+	ASSERT0(logical_rs->rs_start % (1 << ashift));
+	ASSERT0(logical_rs->rs_end % (1 << ashift));
+
+	uint64_t logical_start = logical_rs->rs_start;
+	uint64_t logical_end = logical_rs->rs_end;
+
+	/*
+	 * Unaligned ranges must be skipped. All metaslabs are correctly
+	 * aligned so this should not happen, but this case is handled in
+	 * case it's needed by future callers.
+	 */
+	uint64_t astart = vdev_draid_get_astart(raidvd, logical_start);
+	if (astart != logical_start) {
+		physical_rs->rs_start = logical_start;
+		physical_rs->rs_end = logical_start;
+		remain_rs->rs_start = MIN(astart, logical_end);
+		remain_rs->rs_end = logical_end;
+		return;
+	}
+
+	/*
+	 * Unlike with mirrors and raidz a dRAID logical range can map
+	 * to multiple non-contiguous physical ranges. This is handled by
+	 * limiting the size of the logical range to a single group and
+	 * setting the remain argument such that it describes the remaining
+	 * unmapped logical range. This is stricter than absolutely
+	 * necessary but helps simplify the logic below.
+	 */
+	uint64_t group = vdev_draid_offset_to_group(raidvd, logical_start);
+	uint64_t nextstart = vdev_draid_group_to_offset(raidvd, group + 1);
+	if (logical_end > nextstart)
+		logical_end = nextstart;
+
+	/* Find the starting offset for each vdev in the group */
+	uint64_t perm, groupstart;
+	uint64_t start = vdev_draid_logical_to_physical(raidvd,
+	    logical_start, &perm, &groupstart);
+	uint64_t end = start;
+
+	uint8_t *base;
+	uint64_t iter, id;
+	vdev_draid_get_perm(vdc, perm, &base, &iter);
+
+	/*
+	 * Check if the passed child falls within the group.  If it does
+	 * update the start and end to reflect the physical range.
+	 * Otherwise, leave them unmodified which will result in an empty
+	 * (zero-length) physical range being returned.
+	 */
+	for (uint64_t i = 0; i < vdc->vdc_groupwidth; i++) {
+		uint64_t c = (groupstart + i) % vdc->vdc_ndisks;
+
+		if (c == 0 && i != 0) {
+			/* the group wrapped, increment the start */
+			start += VDEV_DRAID_ROWHEIGHT;
+			end = start;
+		}
+
+		id = vdev_draid_permute_id(vdc, base, iter, c);
+		if (id == cvd->vdev_id) {
+			uint64_t b_size = (logical_end >> ashift) -
+			    (logical_start >> ashift);
+			ASSERT3U(b_size, >, 0);
+			end = start + ((((b_size - 1) /
+			    vdc->vdc_groupwidth) + 1) << ashift);
+			break;
+		}
+	}
+	physical_rs->rs_start = start;
+	physical_rs->rs_end = end;
+
+	/*
+	 * Only top-level vdevs are allowed to set remain_rs because
+	 * when .vdev_op_xlate() is called for their children the full
+	 * logical range is not provided by vdev_xlate().
+	 */
+	remain_rs->rs_start = logical_end;
+	remain_rs->rs_end = logical_rs->rs_end;
+
+	ASSERT3U(physical_rs->rs_start, <=, logical_start);
+	ASSERT3U(physical_rs->rs_end - physical_rs->rs_start, <=,
+	    logical_end - logical_start);
+}
+
+/*
+ * Add dRAID specific fields to the config nvlist.
+ */
+static void
+vdev_draid_config_generate(vdev_t *vd, nvlist_t *nv)
+{
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_ops);
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY, vdc->vdc_nparity);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_DRAID_NDATA, vdc->vdc_ndata);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_DRAID_NSPARES, vdc->vdc_nspares);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_DRAID_NGROUPS, vdc->vdc_ngroups);
+}
+
+/*
+ * Initialize private dRAID specific fields from the nvlist.
+ */
+static int
+vdev_draid_init(spa_t *spa, nvlist_t *nv, void **tsd)
+{
+	uint64_t ndata, nparity, nspares, ngroups;
+	int error;
+
+	if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_DRAID_NDATA, &ndata))
+		return (SET_ERROR(EINVAL));
+
+	if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY, &nparity) ||
+	    nparity == 0 || nparity > VDEV_DRAID_MAXPARITY) {
+		return (SET_ERROR(EINVAL));
+	}
+
+	uint_t children;
+	nvlist_t **child;
+	if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN,
+	    &child, &children) != 0 || children == 0 ||
+	    children > VDEV_DRAID_MAX_CHILDREN) {
+		return (SET_ERROR(EINVAL));
+	}
+
+	if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_DRAID_NSPARES, &nspares) ||
+	    nspares > 100 || nspares > (children - (ndata + nparity))) {
+		return (SET_ERROR(EINVAL));
+	}
+
+	if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_DRAID_NGROUPS, &ngroups) ||
+	    ngroups == 0 || ngroups > VDEV_DRAID_MAX_CHILDREN) {
+		return (SET_ERROR(EINVAL));
+	}
+
+	/*
+	 * Validate the minimum number of children exist per group for the
+	 * specified parity level (draid1 >= 2, draid2 >= 3, draid3 >= 4).
+	 */
+	if (children < (ndata + nparity + nspares))
+		return (SET_ERROR(EINVAL));
+
+	/*
+	 * Create the dRAID configuration using the pool nvlist configuration
+	 * and the fixed mapping for the correct number of children.
+	 */
+	vdev_draid_config_t *vdc;
+	const draid_map_t *map;
+
+	error = vdev_draid_lookup_map(children, &map);
+	if (error)
+		return (SET_ERROR(EINVAL));
+
+	vdc = kmem_zalloc(sizeof (*vdc), KM_SLEEP);
+	vdc->vdc_ndata = ndata;
+	vdc->vdc_nparity = nparity;
+	vdc->vdc_nspares = nspares;
+	vdc->vdc_children = children;
+	vdc->vdc_ngroups = ngroups;
+	vdc->vdc_nperms = map->dm_nperms;
+
+	error = vdev_draid_generate_perms(map, &vdc->vdc_perms);
+	if (error) {
+		kmem_free(vdc, sizeof (*vdc));
+		return (SET_ERROR(EINVAL));
+	}
+
+	/*
+	 * Derived constants.
+	 */
+	vdc->vdc_groupwidth = vdc->vdc_ndata + vdc->vdc_nparity;
+	vdc->vdc_ndisks = vdc->vdc_children - vdc->vdc_nspares;
+	vdc->vdc_groupsz = vdc->vdc_groupwidth * VDEV_DRAID_ROWHEIGHT;
+	vdc->vdc_devslicesz = (vdc->vdc_groupsz * vdc->vdc_ngroups) /
+	    vdc->vdc_ndisks;
+
+	ASSERT3U(vdc->vdc_groupwidth, >=, 2);
+	ASSERT3U(vdc->vdc_groupwidth, <=, vdc->vdc_ndisks);
+	ASSERT3U(vdc->vdc_groupsz, >=, 2 * VDEV_DRAID_ROWHEIGHT);
+	ASSERT3U(vdc->vdc_devslicesz, >=, VDEV_DRAID_ROWHEIGHT);
+	ASSERT3U(vdc->vdc_devslicesz % VDEV_DRAID_ROWHEIGHT, ==, 0);
+	ASSERT3U((vdc->vdc_groupwidth * vdc->vdc_ngroups) %
+	    vdc->vdc_ndisks, ==, 0);
+
+	*tsd = vdc;
+
+	return (0);
+}
+
+static void
+vdev_draid_fini(vdev_t *vd)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	vmem_free(vdc->vdc_perms, sizeof (uint8_t) *
+	    vdc->vdc_children * vdc->vdc_nperms);
+	kmem_free(vdc, sizeof (*vdc));
+}
+
+static uint64_t
+vdev_draid_nparity(vdev_t *vd)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	return (vdc->vdc_nparity);
+}
+
+static uint64_t
+vdev_draid_ndisks(vdev_t *vd)
+{
+	vdev_draid_config_t *vdc = vd->vdev_tsd;
+
+	return (vdc->vdc_ndisks);
+}
+
+vdev_ops_t vdev_draid_ops = {
+	.vdev_op_init = vdev_draid_init,
+	.vdev_op_fini = vdev_draid_fini,
+	.vdev_op_open = vdev_draid_open,
+	.vdev_op_close = vdev_draid_close,
+	.vdev_op_asize = vdev_draid_asize,
+	.vdev_op_min_asize = vdev_draid_min_asize,
+	.vdev_op_min_alloc = vdev_draid_min_alloc,
+	.vdev_op_io_start = vdev_draid_io_start,
+	.vdev_op_io_done = vdev_draid_io_done,
+	.vdev_op_state_change = vdev_draid_state_change,
+	.vdev_op_need_resilver = vdev_draid_need_resilver,
+	.vdev_op_hold = NULL,
+	.vdev_op_rele = NULL,
+	.vdev_op_remap = NULL,
+	.vdev_op_xlate = vdev_draid_xlate,
+	.vdev_op_rebuild_asize = vdev_draid_rebuild_asize,
+	.vdev_op_metaslab_init = vdev_draid_metaslab_init,
+	.vdev_op_config_generate = vdev_draid_config_generate,
+	.vdev_op_nparity = vdev_draid_nparity,
+	.vdev_op_ndisks = vdev_draid_ndisks,
+	.vdev_op_type = VDEV_TYPE_DRAID,
+	.vdev_op_leaf = B_FALSE,
+};
+
+
+/*
+ * A dRAID distributed spare is a virtual leaf vdev which is included in the
+ * parent dRAID configuration.  The last N columns of the dRAID permutation
+ * table are used to determine on which dRAID children a specific offset
+ * should be written.  These spare leaf vdevs can only be used to replace
+ * faulted children in the same dRAID configuration.
+ */
+
+/*
+ * Distributed spare state.  All fields are set when the distributed spare is
+ * first opened and are immutable.
+ */
+typedef struct {
+	vdev_t *vds_draid_vdev;		/* top-level parent dRAID vdev */
+	uint64_t vds_top_guid;		/* top-level parent dRAID guid */
+	uint64_t vds_spare_id;		/* spare id (0 - vdc->vdc_nspares-1) */
+} vdev_draid_spare_t;
+
+/*
+ * Returns the parent dRAID vdev to which the distributed spare belongs.
+ * This may be safely called even when the vdev is not open.
+ */
+vdev_t *
+vdev_draid_spare_get_parent(vdev_t *vd)
+{
+	vdev_draid_spare_t *vds = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_spare_ops);
+
+	if (vds->vds_draid_vdev != NULL)
+		return (vds->vds_draid_vdev);
+
+	return (vdev_lookup_by_guid(vd->vdev_spa->spa_root_vdev,
+	    vds->vds_top_guid));
+}
+
+/*
+ * A dRAID space is active when it's the child of a vdev using the
+ * vdev_spare_ops, vdev_replacing_ops or vdev_draid_ops.
+ */
+static boolean_t
+vdev_draid_spare_is_active(vdev_t *vd)
+{
+	vdev_t *pvd = vd->vdev_parent;
+
+	if (pvd != NULL && (pvd->vdev_ops == &vdev_spare_ops ||
+	    pvd->vdev_ops == &vdev_replacing_ops ||
+	    pvd->vdev_ops == &vdev_draid_ops)) {
+		return (B_TRUE);
+	} else {
+		return (B_FALSE);
+	}
+}
+
+/*
+ * Given a dRAID distribute spare vdev, returns the physical child vdev
+ * on which the provided offset resides.  This may involve recursing through
+ * multiple layers of distributed spares.  Note that offset is relative to
+ * this vdev.
+ */
+vdev_t *
+vdev_draid_spare_get_child(vdev_t *vd, uint64_t physical_offset)
+{
+	vdev_draid_spare_t *vds = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_spare_ops);
+
+	/* The vdev is closed */
+	if (vds->vds_draid_vdev == NULL)
+		return (NULL);
+
+	vdev_t *tvd = vds->vds_draid_vdev;
+	vdev_draid_config_t *vdc = tvd->vdev_tsd;
+
+	ASSERT3P(tvd->vdev_ops, ==, &vdev_draid_ops);
+	ASSERT3U(vds->vds_spare_id, <, vdc->vdc_nspares);
+
+	uint8_t *base;
+	uint64_t iter;
+	uint64_t perm = physical_offset / vdc->vdc_devslicesz;
+
+	vdev_draid_get_perm(vdc, perm, &base, &iter);
+
+	uint64_t cid = vdev_draid_permute_id(vdc, base, iter,
+	    (tvd->vdev_children - 1) - vds->vds_spare_id);
+	vdev_t *cvd = tvd->vdev_child[cid];
+
+	if (cvd->vdev_ops == &vdev_draid_spare_ops)
+		return (vdev_draid_spare_get_child(cvd, physical_offset));
+
+	return (cvd);
+}
+
+/* ARGSUSED */
+static void
+vdev_draid_spare_close(vdev_t *vd)
+{
+	vdev_draid_spare_t *vds = vd->vdev_tsd;
+	vds->vds_draid_vdev = NULL;
+}
+
+/*
+ * Opening a dRAID spare device is done by looking up the associated dRAID
+ * top-level vdev guid from the spare configuration.
+ */
+static int
+vdev_draid_spare_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize,
+    uint64_t *logical_ashift, uint64_t *physical_ashift)
+{
+	vdev_draid_spare_t *vds = vd->vdev_tsd;
+	vdev_t *rvd = vd->vdev_spa->spa_root_vdev;
+	uint64_t asize, max_asize;
+
+	vdev_t *tvd = vdev_lookup_by_guid(rvd, vds->vds_top_guid);
+	if (tvd == NULL) {
+		/*
+		 * When spa_vdev_add() is labeling new spares the
+		 * associated dRAID is not attached to the root vdev
+		 * nor does this spare have a parent.  Simulate a valid
+		 * device in order to allow the label to be initialized
+		 * and the distributed spare added to the configuration.
+		 */
+		if (vd->vdev_parent == NULL) {
+			*psize = *max_psize = SPA_MINDEVSIZE;
+			*logical_ashift = *physical_ashift = ASHIFT_MIN;
+			return (0);
+		}
+
+		return (SET_ERROR(EINVAL));
+	}
+
+	vdev_draid_config_t *vdc = tvd->vdev_tsd;
+	if (tvd->vdev_ops != &vdev_draid_ops || vdc == NULL)
+		return (SET_ERROR(EINVAL));
+
+	if (vds->vds_spare_id >= vdc->vdc_nspares)
+		return (SET_ERROR(EINVAL));
+
+	/*
+	 * Neither tvd->vdev_asize or tvd->vdev_max_asize can be used here
+	 * because the caller may be vdev_draid_open() in which case the
+	 * values are stale as they haven't yet been updated by vdev_open().
+	 * To avoid this always recalculate the dRAID asize and max_asize.
+	 */
+	vdev_draid_calculate_asize(tvd, &asize, &max_asize,
+	    logical_ashift, physical_ashift);
+
+	*psize = asize + VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE;
+	*max_psize = max_asize + VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE;
+
+	vds->vds_draid_vdev = tvd;
+
+	return (0);
+}
+
+/*
+ * Completed distributed spare IO.  Store the result in the parent zio
+ * as if it had performed the operation itself.  Only the first error is
+ * preserved if there are multiple errors.
+ */
+static void
+vdev_draid_spare_child_done(zio_t *zio)
+{
+	zio_t *pio = zio->io_private;
+
+	/*
+	 * IOs are issued to non-writable vdevs in order to keep their
+	 * DTLs accurate.  However, we don't want to propagate the
+	 * error in to the distributed spare's DTL.  When resilvering
+	 * vdev_draid_need_resilver() will consult the relevant DTL
+	 * to determine if the data is missing and must be repaired.
+	 */
+	if (!vdev_writeable(zio->io_vd))
+		return;
+
+	if (pio->io_error == 0)
+		pio->io_error = zio->io_error;
+}
+
+/*
+ * Returns a valid label nvlist for the distributed spare vdev.  This is
+ * used to bypass the IO pipeline to avoid the complexity of constructing
+ * a complete label with valid checksum to return when read.
+ */
+nvlist_t *
+vdev_draid_read_config_spare(vdev_t *vd)
+{
+	spa_t *spa = vd->vdev_spa;
+	spa_aux_vdev_t *sav = &spa->spa_spares;
+	uint64_t guid = vd->vdev_guid;
+
+	nvlist_t *nv = fnvlist_alloc();
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_IS_SPARE, 1);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_CREATE_TXG, vd->vdev_crtxg);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_VERSION, spa_version(spa));
+	fnvlist_add_string(nv, ZPOOL_CONFIG_POOL_NAME, spa_name(spa));
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_POOL_GUID, spa_guid(spa));
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_POOL_TXG, spa->spa_config_txg);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_TOP_GUID, vd->vdev_top->vdev_guid);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_POOL_STATE,
+	    vdev_draid_spare_is_active(vd) ?
+	    POOL_STATE_ACTIVE : POOL_STATE_SPARE);
+
+	/* Set the vdev guid based on the vdev list in sav_count. */
+	for (int i = 0; i < sav->sav_count; i++) {
+		if (sav->sav_vdevs[i]->vdev_ops == &vdev_draid_spare_ops &&
+		    strcmp(sav->sav_vdevs[i]->vdev_path, vd->vdev_path) == 0) {
+			guid = sav->sav_vdevs[i]->vdev_guid;
+			break;
+		}
+	}
+
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_GUID, guid);
+
+	return (nv);
+}
+
+/*
+ * Handle any ioctl requested of the distributed spare.  Only flushes
+ * are supported in which case all children must be flushed.
+ */
+static int
+vdev_draid_spare_ioctl(zio_t *zio)
+{
+	vdev_t *vd = zio->io_vd;
+	int error = 0;
+
+	if (zio->io_cmd == DKIOCFLUSHWRITECACHE) {
+		for (int c = 0; c < vd->vdev_children; c++) {
+			zio_nowait(zio_vdev_child_io(zio, NULL,
+			    vd->vdev_child[c], zio->io_offset, zio->io_abd,
+			    zio->io_size, zio->io_type, zio->io_priority, 0,
+			    vdev_draid_spare_child_done, zio));
+		}
+	} else {
+		error = SET_ERROR(ENOTSUP);
+	}
+
+	return (error);
+}
+
+/*
+ * Initiate an IO to the distributed spare.  For normal IOs this entails using
+ * the zio->io_offset and permutation table to calculate which child dRAID vdev
+ * is responsible for the data.  Then passing along the zio to that child to
+ * perform the actual IO.  The label ranges are not stored on disk and require
+ * some special handling which is described below.
+ */
+static void
+vdev_draid_spare_io_start(zio_t *zio)
+{
+	vdev_t *cvd = NULL, *vd = zio->io_vd;
+	vdev_draid_spare_t *vds = vd->vdev_tsd;
+	uint64_t offset = zio->io_offset - VDEV_LABEL_START_SIZE;
+
+	/*
+	 * If the vdev is closed, it's likely in the REMOVED or FAULTED state.
+	 * Nothing to be done here but return failure.
+	 */
+	if (vds == NULL) {
+		zio->io_error = ENXIO;
+		zio_interrupt(zio);
+		return;
+	}
+
+	switch (zio->io_type) {
+	case ZIO_TYPE_IOCTL:
+		zio->io_error = vdev_draid_spare_ioctl(zio);
+		break;
+
+	case ZIO_TYPE_WRITE:
+		if (VDEV_OFFSET_IS_LABEL(vd, zio->io_offset)) {
+			/*
+			 * Accept probe IOs and config writers to simulate the
+			 * existence of an on disk label.  vdev_label_sync(),
+			 * vdev_uberblock_sync() and vdev_copy_uberblocks()
+			 * skip the distributed spares.  This only leaves
+			 * vdev_label_init() which is allowed to succeed to
+			 * avoid adding special cases the function.
+			 */
+			if (zio->io_flags & ZIO_FLAG_PROBE ||
+			    zio->io_flags & ZIO_FLAG_CONFIG_WRITER) {
+				zio->io_error = 0;
+			} else {
+				zio->io_error = SET_ERROR(EIO);
+			}
+		} else {
+			cvd = vdev_draid_spare_get_child(vd, offset);
+
+			if (cvd == NULL) {
+				zio->io_error = SET_ERROR(ENXIO);
+			} else {
+				zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
+				    offset, zio->io_abd, zio->io_size,
+				    zio->io_type, zio->io_priority, 0,
+				    vdev_draid_spare_child_done, zio));
+			}
+		}
+		break;
+
+	case ZIO_TYPE_READ:
+		if (VDEV_OFFSET_IS_LABEL(vd, zio->io_offset)) {
+			/*
+			 * Accept probe IOs to simulate the existence of a
+			 * label.  vdev_label_read_config() bypasses the
+			 * pipeline to read the label configuration and
+			 * vdev_uberblock_load() skips distributed spares
+			 * when attempting to locate the best uberblock.
+			 */
+			if (zio->io_flags & ZIO_FLAG_PROBE) {
+				zio->io_error = 0;
+			} else {
+				zio->io_error = SET_ERROR(EIO);
+			}
+		} else {
+			cvd = vdev_draid_spare_get_child(vd, offset);
+
+			if (cvd == NULL || !vdev_readable(cvd)) {
+				zio->io_error = SET_ERROR(ENXIO);
+			} else {
+				zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
+				    offset, zio->io_abd, zio->io_size,
+				    zio->io_type, zio->io_priority, 0,
+				    vdev_draid_spare_child_done, zio));
+			}
+		}
+		break;
+
+	case ZIO_TYPE_TRIM:
+		/* The vdev label ranges are never trimmed */
+		ASSERT0(VDEV_OFFSET_IS_LABEL(vd, zio->io_offset));
+
+		cvd = vdev_draid_spare_get_child(vd, offset);
+
+		if (cvd == NULL || !cvd->vdev_has_trim) {
+			zio->io_error = SET_ERROR(ENXIO);
+		} else {
+			zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
+			    offset, zio->io_abd, zio->io_size,
+			    zio->io_type, zio->io_priority, 0,
+			    vdev_draid_spare_child_done, zio));
+		}
+		break;
+
+	default:
+		zio->io_error = SET_ERROR(ENOTSUP);
+		break;
+	}
+
+	zio_execute(zio);
+}
+
+/* ARGSUSED */
+static void
+vdev_draid_spare_io_done(zio_t *zio)
+{
+}
+
+/*
+ * Lookup the full spare config in spa->spa_spares.sav_config and
+ * return the top_guid and spare_id for the named spare.
+ */
+static int
+vdev_draid_spare_lookup(spa_t *spa, nvlist_t *nv, uint64_t *top_guidp,
+    uint64_t *spare_idp)
+{
+	nvlist_t **spares;
+	uint_t nspares;
+	int error;
+
+	if ((spa->spa_spares.sav_config == NULL) ||
+	    (nvlist_lookup_nvlist_array(spa->spa_spares.sav_config,
+	    ZPOOL_CONFIG_SPARES, &spares, &nspares) != 0)) {
+		return (SET_ERROR(ENOENT));
+	}
+
+	char *spare_name;
+	error = nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &spare_name);
+	if (error != 0)
+		return (SET_ERROR(EINVAL));
+
+	for (int i = 0; i < nspares; i++) {
+		nvlist_t *spare = spares[i];
+		uint64_t top_guid, spare_id;
+		char *type, *path;
+
+		/* Skip non-distributed spares */
+		error = nvlist_lookup_string(spare, ZPOOL_CONFIG_TYPE, &type);
+		if (error != 0 || strcmp(type, VDEV_TYPE_DRAID_SPARE) != 0)
+			continue;
+
+		/* Skip spares with the wrong name */
+		error = nvlist_lookup_string(spare, ZPOOL_CONFIG_PATH, &path);
+		if (error != 0 || strcmp(path, spare_name) != 0)
+			continue;
+
+		/* Found the matching spare */
+		error = nvlist_lookup_uint64(spare,
+		    ZPOOL_CONFIG_TOP_GUID, &top_guid);
+		if (error == 0) {
+			error = nvlist_lookup_uint64(spare,
+			    ZPOOL_CONFIG_SPARE_ID, &spare_id);
+		}
+
+		if (error != 0) {
+			return (SET_ERROR(EINVAL));
+		} else {
+			*top_guidp = top_guid;
+			*spare_idp = spare_id;
+			return (0);
+		}
+	}
+
+	return (SET_ERROR(ENOENT));
+}
+
+/*
+ * Initialize private dRAID spare specific fields from the nvlist.
+ */
+static int
+vdev_draid_spare_init(spa_t *spa, nvlist_t *nv, void **tsd)
+{
+	vdev_draid_spare_t *vds;
+	uint64_t top_guid = 0;
+	uint64_t spare_id;
+
+	/*
+	 * In the normal case check the list of spares stored in the spa
+	 * to lookup the top_guid and spare_id for provided spare config.
+	 * When creating a new pool or adding vdevs the spare list is not
+	 * yet populated and the values are provided in the passed config.
+	 */
+	if (vdev_draid_spare_lookup(spa, nv, &top_guid, &spare_id) != 0) {
+		if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_TOP_GUID,
+		    &top_guid) != 0)
+			return (SET_ERROR(EINVAL));
+
+		if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_SPARE_ID,
+		    &spare_id) != 0)
+			return (SET_ERROR(EINVAL));
+	}
+
+	vds = kmem_alloc(sizeof (vdev_draid_spare_t), KM_SLEEP);
+	vds->vds_draid_vdev = NULL;
+	vds->vds_top_guid = top_guid;
+	vds->vds_spare_id = spare_id;
+
+	*tsd = vds;
+
+	return (0);
+}
+
+static void
+vdev_draid_spare_fini(vdev_t *vd)
+{
+	kmem_free(vd->vdev_tsd, sizeof (vdev_draid_spare_t));
+}
+
+static void
+vdev_draid_spare_config_generate(vdev_t *vd, nvlist_t *nv)
+{
+	vdev_draid_spare_t *vds = vd->vdev_tsd;
+
+	ASSERT3P(vd->vdev_ops, ==, &vdev_draid_spare_ops);
+
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_TOP_GUID, vds->vds_top_guid);
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_SPARE_ID, vds->vds_spare_id);
+}
+
+vdev_ops_t vdev_draid_spare_ops = {
+	.vdev_op_init = vdev_draid_spare_init,
+	.vdev_op_fini = vdev_draid_spare_fini,
+	.vdev_op_open = vdev_draid_spare_open,
+	.vdev_op_close = vdev_draid_spare_close,
+	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
+	.vdev_op_io_start = vdev_draid_spare_io_start,
+	.vdev_op_io_done = vdev_draid_spare_io_done,
+	.vdev_op_state_change = NULL,
+	.vdev_op_need_resilver = NULL,
+	.vdev_op_hold = NULL,
+	.vdev_op_rele = NULL,
+	.vdev_op_remap = NULL,
+	.vdev_op_xlate = vdev_default_xlate,
+	.vdev_op_rebuild_asize = NULL,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = vdev_draid_spare_config_generate,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
+	.vdev_op_type = VDEV_TYPE_DRAID_SPARE,
+	.vdev_op_leaf = B_TRUE,
+};
diff --git a/module/zfs/vdev_draid_rand.c b/module/zfs/vdev_draid_rand.c
new file mode 100644
index 000000000..fe1a75c11
--- /dev/null
+++ b/module/zfs/vdev_draid_rand.c
@@ -0,0 +1,40 @@
+/*
+ * Xorshift Pseudo Random Number Generator based on work by David Blackman
+ * and Sebastiano Vigna ([email protected]).
+ *
+ *   "Further scramblings of Marsaglia's xorshift generators"
+ *   http://vigna.di.unimi.it/ftp/papers/xorshiftplus.pdf
+ *   http://prng.di.unimi.it/xoroshiro128plusplus.c
+ *
+ * To the extent possible under law, the author has dedicated all copyright
+ * and related and neighboring rights to this software to the public domain
+ * worldwide. This software is distributed without any warranty.
+ *
+ * See <http://creativecommons.org/publicdomain/zero/1.0/>.
+ *
+ * This is xoroshiro128++ 1.0, one of our all-purpose, rock-solid,
+ * small-state generators. It is extremely (sub-ns) fast and it passes all
+ * tests we are aware of, but its state space is large enough only for
+ * mild parallelism.
+ */
+
+#include <sys/vdev_draid.h>
+
+static inline uint64_t rotl(const uint64_t x, int k)
+{
+	return (x << k) | (x >> (64 - k));
+}
+
+uint64_t
+vdev_draid_rand(uint64_t *s)
+{
+	const uint64_t s0 = s[0];
+	uint64_t s1 = s[1];
+	const uint64_t result = rotl(s0 + s1, 17) + s0;
+
+	s1 ^= s0;
+	s[0] = rotl(s0, 49) ^ s1 ^ (s1 << 21); // a, b
+	s[1] = rotl(s1, 28); // c
+
+	return (result);
+}
diff --git a/module/zfs/vdev_indirect.c b/module/zfs/vdev_indirect.c
index 12ee393bd..009394bfe 100644
--- a/module/zfs/vdev_indirect.c
+++ b/module/zfs/vdev_indirect.c
@@ -1844,9 +1844,13 @@ vdev_indirect_io_done(zio_t *zio)
 }
 
 vdev_ops_t vdev_indirect_ops = {
+	.vdev_op_init = NULL,
+	.vdev_op_fini = NULL,
 	.vdev_op_open = vdev_indirect_open,
 	.vdev_op_close = vdev_indirect_close,
 	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = vdev_indirect_io_start,
 	.vdev_op_io_done = vdev_indirect_io_done,
 	.vdev_op_state_change = NULL,
@@ -1855,6 +1859,11 @@ vdev_ops_t vdev_indirect_ops = {
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = vdev_indirect_remap,
 	.vdev_op_xlate = NULL,
+	.vdev_op_rebuild_asize = NULL,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = NULL,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
 	.vdev_op_type = VDEV_TYPE_INDIRECT,	/* name of this vdev type */
 	.vdev_op_leaf = B_FALSE			/* leaf vdev */
 };
diff --git a/module/zfs/vdev_initialize.c b/module/zfs/vdev_initialize.c
index 7ff7fffcc..083ad2861 100644
--- a/module/zfs/vdev_initialize.c
+++ b/module/zfs/vdev_initialize.c
@@ -121,6 +121,8 @@ vdev_initialize_change_state(vdev_t *vd, vdev_initializing_state_t new_state)
 	if (vd->vdev_initialize_state != VDEV_INITIALIZE_SUSPENDED) {
 		vd->vdev_initialize_action_time = gethrestime_sec();
 	}
+
+	vdev_initializing_state_t old_state = vd->vdev_initialize_state;
 	vd->vdev_initialize_state = new_state;
 
 	dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
@@ -138,8 +140,10 @@ vdev_initialize_change_state(vdev_t *vd, vdev_initializing_state_t new_state)
 		    "vdev=%s suspended", vd->vdev_path);
 		break;
 	case VDEV_INITIALIZE_CANCELED:
-		spa_history_log_internal(spa, "initialize", tx,
-		    "vdev=%s canceled", vd->vdev_path);
+		if (old_state == VDEV_INITIALIZE_ACTIVE ||
+		    old_state == VDEV_INITIALIZE_SUSPENDED)
+			spa_history_log_internal(spa, "initialize", tx,
+			    "vdev=%s canceled", vd->vdev_path);
 		break;
 	case VDEV_INITIALIZE_COMPLETE:
 		spa_history_log_internal(spa, "initialize", tx,
@@ -318,6 +322,32 @@ vdev_initialize_ranges(vdev_t *vd, abd_t *data)
 }
 
 static void
+vdev_initialize_xlate_last_rs_end(void *arg, range_seg64_t *physical_rs)
+{
+	uint64_t *last_rs_end = (uint64_t *)arg;
+
+	if (physical_rs->rs_end > *last_rs_end)
+		*last_rs_end = physical_rs->rs_end;
+}
+
+static void
+vdev_initialize_xlate_progress(void *arg, range_seg64_t *physical_rs)
+{
+	vdev_t *vd = (vdev_t *)arg;
+
+	uint64_t size = physical_rs->rs_end - physical_rs->rs_start;
+	vd->vdev_initialize_bytes_est += size;
+
+	if (vd->vdev_initialize_last_offset > physical_rs->rs_end) {
+		vd->vdev_initialize_bytes_done += size;
+	} else if (vd->vdev_initialize_last_offset > physical_rs->rs_start &&
+	    vd->vdev_initialize_last_offset < physical_rs->rs_end) {
+		vd->vdev_initialize_bytes_done +=
+		    vd->vdev_initialize_last_offset - physical_rs->rs_start;
+	}
+}
+
+static void
 vdev_initialize_calculate_progress(vdev_t *vd)
 {
 	ASSERT(spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_READER) ||
@@ -331,28 +361,35 @@ vdev_initialize_calculate_progress(vdev_t *vd)
 		metaslab_t *msp = vd->vdev_top->vdev_ms[i];
 		mutex_enter(&msp->ms_lock);
 
-		uint64_t ms_free = msp->ms_size -
-		    metaslab_allocated_space(msp);
-
-		if (vd->vdev_top->vdev_ops == &vdev_raidz_ops)
-			ms_free /= vd->vdev_top->vdev_children;
+		uint64_t ms_free = (msp->ms_size -
+		    metaslab_allocated_space(msp)) /
+		    vdev_get_ndisks(vd->vdev_top);
 
 		/*
 		 * Convert the metaslab range to a physical range
 		 * on our vdev. We use this to determine if we are
 		 * in the middle of this metaslab range.
 		 */
-		range_seg64_t logical_rs, physical_rs;
+		range_seg64_t logical_rs, physical_rs, remain_rs;
 		logical_rs.rs_start = msp->ms_start;
 		logical_rs.rs_end = msp->ms_start + msp->ms_size;
-		vdev_xlate(vd, &logical_rs, &physical_rs);
 
+		/* Metaslab space after this offset has not been initialized */
+		vdev_xlate(vd, &logical_rs, &physical_rs, &remain_rs);
 		if (vd->vdev_initialize_last_offset <= physical_rs.rs_start) {
 			vd->vdev_initialize_bytes_est += ms_free;
 			mutex_exit(&msp->ms_lock);
 			continue;
-		} else if (vd->vdev_initialize_last_offset >
-		    physical_rs.rs_end) {
+		}
+
+		/* Metaslab space before this offset has been initialized */
+		uint64_t last_rs_end = physical_rs.rs_end;
+		if (!vdev_xlate_is_empty(&remain_rs)) {
+			vdev_xlate_walk(vd, &remain_rs,
+			    vdev_initialize_xlate_last_rs_end, &last_rs_end);
+		}
+
+		if (vd->vdev_initialize_last_offset > last_rs_end) {
 			vd->vdev_initialize_bytes_done += ms_free;
 			vd->vdev_initialize_bytes_est += ms_free;
 			mutex_exit(&msp->ms_lock);
@@ -374,22 +411,9 @@ vdev_initialize_calculate_progress(vdev_t *vd)
 		    &where)) {
 			logical_rs.rs_start = rs_get_start(rs, rt);
 			logical_rs.rs_end = rs_get_end(rs, rt);
-			vdev_xlate(vd, &logical_rs, &physical_rs);
-
-			uint64_t size = physical_rs.rs_end -
-			    physical_rs.rs_start;
-			vd->vdev_initialize_bytes_est += size;
-			if (vd->vdev_initialize_last_offset >
-			    physical_rs.rs_end) {
-				vd->vdev_initialize_bytes_done += size;
-			} else if (vd->vdev_initialize_last_offset >
-			    physical_rs.rs_start &&
-			    vd->vdev_initialize_last_offset <
-			    physical_rs.rs_end) {
-				vd->vdev_initialize_bytes_done +=
-				    vd->vdev_initialize_last_offset -
-				    physical_rs.rs_start;
-			}
+
+			vdev_xlate_walk(vd, &logical_rs,
+			    vdev_initialize_xlate_progress, vd);
 		}
 		mutex_exit(&msp->ms_lock);
 	}
@@ -419,55 +443,48 @@ vdev_initialize_load(vdev_t *vd)
 	return (err);
 }
 
-/*
- * Convert the logical range into a physical range and add it to our
- * avl tree.
- */
 static void
-vdev_initialize_range_add(void *arg, uint64_t start, uint64_t size)
+vdev_initialize_xlate_range_add(void *arg, range_seg64_t *physical_rs)
 {
 	vdev_t *vd = arg;
-	range_seg64_t logical_rs, physical_rs;
-	logical_rs.rs_start = start;
-	logical_rs.rs_end = start + size;
-
-	ASSERT(vd->vdev_ops->vdev_op_leaf);
-	vdev_xlate(vd, &logical_rs, &physical_rs);
-
-	IMPLY(vd->vdev_top == vd,
-	    logical_rs.rs_start == physical_rs.rs_start);
-	IMPLY(vd->vdev_top == vd,
-	    logical_rs.rs_end == physical_rs.rs_end);
 
 	/* Only add segments that we have not visited yet */
-	if (physical_rs.rs_end <= vd->vdev_initialize_last_offset)
+	if (physical_rs->rs_end <= vd->vdev_initialize_last_offset)
 		return;
 
 	/* Pick up where we left off mid-range. */
-	if (vd->vdev_initialize_last_offset > physical_rs.rs_start) {
+	if (vd->vdev_initialize_last_offset > physical_rs->rs_start) {
 		zfs_dbgmsg("range write: vd %s changed (%llu, %llu) to "
 		    "(%llu, %llu)", vd->vdev_path,
-		    (u_longlong_t)physical_rs.rs_start,
-		    (u_longlong_t)physical_rs.rs_end,
+		    (u_longlong_t)physical_rs->rs_start,
+		    (u_longlong_t)physical_rs->rs_end,
 		    (u_longlong_t)vd->vdev_initialize_last_offset,
-		    (u_longlong_t)physical_rs.rs_end);
-		ASSERT3U(physical_rs.rs_end, >,
+		    (u_longlong_t)physical_rs->rs_end);
+		ASSERT3U(physical_rs->rs_end, >,
 		    vd->vdev_initialize_last_offset);
-		physical_rs.rs_start = vd->vdev_initialize_last_offset;
+		physical_rs->rs_start = vd->vdev_initialize_last_offset;
 	}
-	ASSERT3U(physical_rs.rs_end, >=, physical_rs.rs_start);
 
-	/*
-	 * With raidz, it's possible that the logical range does not live on
-	 * this leaf vdev. We only add the physical range to this vdev's if it
-	 * has a length greater than 0.
-	 */
-	if (physical_rs.rs_end > physical_rs.rs_start) {
-		range_tree_add(vd->vdev_initialize_tree, physical_rs.rs_start,
-		    physical_rs.rs_end - physical_rs.rs_start);
-	} else {
-		ASSERT3U(physical_rs.rs_end, ==, physical_rs.rs_start);
-	}
+	ASSERT3U(physical_rs->rs_end, >, physical_rs->rs_start);
+
+	range_tree_add(vd->vdev_initialize_tree, physical_rs->rs_start,
+	    physical_rs->rs_end - physical_rs->rs_start);
+}
+
+/*
+ * Convert the logical range into a physical range and add it to our
+ * avl tree.
+ */
+static void
+vdev_initialize_range_add(void *arg, uint64_t start, uint64_t size)
+{
+	vdev_t *vd = arg;
+	range_seg64_t logical_rs;
+	logical_rs.rs_start = start;
+	logical_rs.rs_end = start + size;
+
+	ASSERT(vd->vdev_ops->vdev_op_leaf);
+	vdev_xlate_walk(vd, &logical_rs, vdev_initialize_xlate_range_add, arg);
 }
 
 static void
diff --git a/module/zfs/vdev_label.c b/module/zfs/vdev_label.c
index d063b77ea..fbd117d2d 100644
--- a/module/zfs/vdev_label.c
+++ b/module/zfs/vdev_label.c
@@ -142,6 +142,7 @@
 #include <sys/zap.h>
 #include <sys/vdev.h>
 #include <sys/vdev_impl.h>
+#include <sys/vdev_draid.h>
 #include <sys/uberblock_impl.h>
 #include <sys/metaslab.h>
 #include <sys/metaslab_impl.h>
@@ -453,31 +454,13 @@ vdev_config_generate(spa_t *spa, vdev_t *vd, boolean_t getstats,
 	if (vd->vdev_fru != NULL)
 		fnvlist_add_string(nv, ZPOOL_CONFIG_FRU, vd->vdev_fru);
 
-	if (vd->vdev_nparity != 0) {
-		ASSERT(strcmp(vd->vdev_ops->vdev_op_type,
-		    VDEV_TYPE_RAIDZ) == 0);
+	if (vd->vdev_ops->vdev_op_config_generate != NULL)
+		vd->vdev_ops->vdev_op_config_generate(vd, nv);
 
-		/*
-		 * Make sure someone hasn't managed to sneak a fancy new vdev
-		 * into a crufty old storage pool.
-		 */
-		ASSERT(vd->vdev_nparity == 1 ||
-		    (vd->vdev_nparity <= 2 &&
-		    spa_version(spa) >= SPA_VERSION_RAIDZ2) ||
-		    (vd->vdev_nparity <= 3 &&
-		    spa_version(spa) >= SPA_VERSION_RAIDZ3));
-
-		/*
-		 * Note that we'll add the nparity tag even on storage pools
-		 * that only support a single parity device -- older software
-		 * will just ignore it.
-		 */
-		fnvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY, vd->vdev_nparity);
-	}
-
-	if (vd->vdev_wholedisk != -1ULL)
+	if (vd->vdev_wholedisk != -1ULL) {
 		fnvlist_add_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK,
 		    vd->vdev_wholedisk);
+	}
 
 	if (vd->vdev_not_present && !(flags & VDEV_CONFIG_MISSING))
 		fnvlist_add_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, 1);
@@ -785,6 +768,14 @@ vdev_label_read_config(vdev_t *vd, uint64_t txg)
 	if (!vdev_readable(vd))
 		return (NULL);
 
+	/*
+	 * The label for a dRAID distributed spare is not stored on disk.
+	 * Instead it is generated when needed which allows us to bypass
+	 * the pipeline when reading the config from the label.
+	 */
+	if (vd->vdev_ops == &vdev_draid_spare_ops)
+		return (vdev_draid_read_config_spare(vd));
+
 	vp_abd = abd_alloc_linear(sizeof (vdev_phys_t), B_TRUE);
 	vp = abd_to_buf(vp_abd);
 
@@ -1497,7 +1488,8 @@ vdev_uberblock_load_impl(zio_t *zio, vdev_t *vd, int flags,
 	for (int c = 0; c < vd->vdev_children; c++)
 		vdev_uberblock_load_impl(zio, vd->vdev_child[c], flags, cbp);
 
-	if (vd->vdev_ops->vdev_op_leaf && vdev_readable(vd)) {
+	if (vd->vdev_ops->vdev_op_leaf && vdev_readable(vd) &&
+	    vd->vdev_ops != &vdev_draid_spare_ops) {
 		for (int l = 0; l < VDEV_LABELS; l++) {
 			for (int n = 0; n < VDEV_UBERBLOCK_COUNT(vd); n++) {
 				vdev_label_read(zio, vd, l,
@@ -1586,6 +1578,13 @@ vdev_copy_uberblocks(vdev_t *vd)
 	    SCL_STATE);
 	ASSERT(vd->vdev_ops->vdev_op_leaf);
 
+	/*
+	 * No uberblocks are stored on distributed spares, they may be
+	 * safely skipped when expanding a leaf vdev.
+	 */
+	if (vd->vdev_ops == &vdev_draid_spare_ops)
+		return;
+
 	spa_config_enter(vd->vdev_spa, locks, FTAG, RW_READER);
 
 	ub_abd = abd_alloc_linear(VDEV_UBERBLOCK_SIZE(vd), B_TRUE);
@@ -1647,6 +1646,15 @@ vdev_uberblock_sync(zio_t *zio, uint64_t *good_writes,
 	if (!vdev_writeable(vd))
 		return;
 
+	/*
+	 * There's no need to write uberblocks to a distributed spare, they
+	 * are already stored on all the leaves of the parent dRAID.  For
+	 * this same reason vdev_uberblock_load_impl() skips distributed
+	 * spares when reading uberblocks.
+	 */
+	if (vd->vdev_ops == &vdev_draid_spare_ops)
+		return;
+
 	/* If the vdev was expanded, need to copy uberblock rings. */
 	if (vd->vdev_state == VDEV_STATE_HEALTHY &&
 	    vd->vdev_copy_uberblocks == B_TRUE) {
@@ -1764,6 +1772,14 @@ vdev_label_sync(zio_t *zio, uint64_t *good_writes,
 		return;
 
 	/*
+	 * The top-level config never needs to be written to a distributed
+	 * spare.  When read vdev_dspare_label_read_config() will generate
+	 * the config for the vdev_label_read_config().
+	 */
+	if (vd->vdev_ops == &vdev_draid_spare_ops)
+		return;
+
+	/*
 	 * Generate a label describing the top-level config to which we belong.
 	 */
 	label = spa_config_generate(vd->vdev_spa, vd, txg, B_FALSE);
diff --git a/module/zfs/vdev_mirror.c b/module/zfs/vdev_mirror.c
index 71b5adbbd..71ca43cae 100644
--- a/module/zfs/vdev_mirror.c
+++ b/module/zfs/vdev_mirror.c
@@ -33,6 +33,7 @@
 #include <sys/dsl_pool.h>
 #include <sys/dsl_scan.h>
 #include <sys/vdev_impl.h>
+#include <sys/vdev_draid.h>
 #include <sys/zio.h>
 #include <sys/abd.h>
 #include <sys/fs/zfs.h>
@@ -99,7 +100,6 @@ vdev_mirror_stat_fini(void)
 /*
  * Virtual device vector for mirroring.
  */
-
 typedef struct mirror_child {
 	vdev_t		*mc_vd;
 	uint64_t	mc_offset;
@@ -108,6 +108,7 @@ typedef struct mirror_child {
 	uint8_t		mc_tried;
 	uint8_t		mc_skipped;
 	uint8_t		mc_speculative;
+	uint8_t		mc_rebuilding;
 } mirror_child_t;
 
 typedef struct mirror_map {
@@ -115,6 +116,7 @@ typedef struct mirror_map {
 	int		mm_preferred_cnt;
 	int		mm_children;
 	boolean_t	mm_resilvering;
+	boolean_t	mm_rebuilding;
 	boolean_t	mm_root;
 	mirror_child_t	mm_child[];
 } mirror_map_t;
@@ -239,6 +241,21 @@ vdev_mirror_load(mirror_map_t *mm, vdev_t *vd, uint64_t zio_offset)
 	return (load + zfs_vdev_mirror_rotating_seek_inc);
 }
 
+static boolean_t
+vdev_mirror_rebuilding(vdev_t *vd)
+{
+	if (vd->vdev_ops->vdev_op_leaf && vd->vdev_rebuild_txg)
+		return (B_TRUE);
+
+	for (int i = 0; i < vd->vdev_children; i++) {
+		if (vdev_mirror_rebuilding(vd->vdev_child[i])) {
+			return (B_TRUE);
+		}
+	}
+
+	return (B_FALSE);
+}
+
 /*
  * Avoid inlining the function to keep vdev_mirror_io_start(), which
  * is this functions only caller, as small as possible on the stack.
@@ -356,6 +373,9 @@ vdev_mirror_map_init(zio_t *zio)
 			mc = &mm->mm_child[c];
 			mc->mc_vd = vd->vdev_child[c];
 			mc->mc_offset = zio->io_offset;
+
+			if (vdev_mirror_rebuilding(mc->mc_vd))
+				mm->mm_rebuilding = mc->mc_rebuilding = B_TRUE;
 		}
 	}
 
@@ -493,12 +513,37 @@ vdev_mirror_preferred_child_randomize(zio_t *zio)
 	return (mm->mm_preferred[p]);
 }
 
+static boolean_t
+vdev_mirror_child_readable(mirror_child_t *mc)
+{
+	vdev_t *vd = mc->mc_vd;
+
+	if (vd->vdev_top != NULL && vd->vdev_top->vdev_ops == &vdev_draid_ops)
+		return (vdev_draid_readable(vd, mc->mc_offset));
+	else
+		return (vdev_readable(vd));
+}
+
+static boolean_t
+vdev_mirror_child_missing(mirror_child_t *mc, uint64_t txg, uint64_t size)
+{
+	vdev_t *vd = mc->mc_vd;
+
+	if (vd->vdev_top != NULL && vd->vdev_top->vdev_ops == &vdev_draid_ops)
+		return (vdev_draid_missing(vd, mc->mc_offset, txg, size));
+	else
+		return (vdev_dtl_contains(vd, DTL_MISSING, txg, size));
+}
+
 /*
  * Try to find a vdev whose DTL doesn't contain the block we want to read
- * preferring vdevs based on determined load.
+ * preferring vdevs based on determined load. If we can't, try the read on
+ * any vdev we haven't already tried.
  *
- * Try to find a child whose DTL doesn't contain the block we want to read.
- * If we can't, try the read on any vdev we haven't already tried.
+ * Distributed spares are an exception to the above load rule. They are
+ * always preferred in order to detect gaps in the distributed spare which
+ * are created when another disk in the dRAID fails. In order to restore
+ * redundancy those gaps must be read to trigger the required repair IO.
  */
 static int
 vdev_mirror_child_select(zio_t *zio)
@@ -518,20 +563,27 @@ vdev_mirror_child_select(zio_t *zio)
 		if (mc->mc_tried || mc->mc_skipped)
 			continue;
 
-		if (mc->mc_vd == NULL || !vdev_readable(mc->mc_vd)) {
+		if (mc->mc_vd == NULL ||
+		    !vdev_mirror_child_readable(mc)) {
 			mc->mc_error = SET_ERROR(ENXIO);
 			mc->mc_tried = 1;	/* don't even try */
 			mc->mc_skipped = 1;
 			continue;
 		}
 
-		if (vdev_dtl_contains(mc->mc_vd, DTL_MISSING, txg, 1)) {
+		if (vdev_mirror_child_missing(mc, txg, 1)) {
 			mc->mc_error = SET_ERROR(ESTALE);
 			mc->mc_skipped = 1;
 			mc->mc_speculative = 1;
 			continue;
 		}
 
+		if (mc->mc_vd->vdev_ops == &vdev_draid_spare_ops) {
+			mm->mm_preferred[0] = c;
+			mm->mm_preferred_cnt = 1;
+			break;
+		}
+
 		mc->mc_load = vdev_mirror_load(mm, mc->mc_vd, mc->mc_offset);
 		if (mc->mc_load > lowest_load)
 			continue;
@@ -625,11 +677,25 @@ vdev_mirror_io_start(zio_t *zio)
 
 	while (children--) {
 		mc = &mm->mm_child[c];
+		c++;
+
+		/*
+		 * When sequentially resilvering only issue write repair
+		 * IOs to the vdev which is being rebuilt since performance
+		 * is limited by the slowest child.  This is an issue for
+		 * faster replacement devices such as distributed spares.
+		 */
+		if ((zio->io_priority == ZIO_PRIORITY_REBUILD) &&
+		    (zio->io_flags & ZIO_FLAG_IO_REPAIR) &&
+		    !(zio->io_flags & ZIO_FLAG_SCRUB) &&
+		    mm->mm_rebuilding && !mc->mc_rebuilding) {
+			continue;
+		}
+
 		zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
 		    mc->mc_vd, mc->mc_offset, zio->io_abd, zio->io_size,
 		    zio->io_type, zio->io_priority, 0,
 		    vdev_mirror_child_done, mc));
-		c++;
 	}
 
 	zio_execute(zio);
@@ -744,6 +810,8 @@ vdev_mirror_io_done(zio_t *zio)
 			mc = &mm->mm_child[c];
 
 			if (mc->mc_error == 0) {
+				vdev_ops_t *ops = mc->mc_vd->vdev_ops;
+
 				if (mc->mc_tried)
 					continue;
 				/*
@@ -752,15 +820,16 @@ vdev_mirror_io_done(zio_t *zio)
 				 * 1. it's a scrub (in which case we have
 				 * tried everything that was healthy)
 				 *  - or -
-				 * 2. it's an indirect vdev (in which case
-				 * it could point to any other vdev, which
-				 * might have a bad DTL)
+				 * 2. it's an indirect or distributed spare
+				 * vdev (in which case it could point to any
+				 * other vdev, which might have a bad DTL)
 				 *  - or -
 				 * 3. the DTL indicates that this data is
 				 * missing from this vdev
 				 */
 				if (!(zio->io_flags & ZIO_FLAG_SCRUB) &&
-				    mc->mc_vd->vdev_ops != &vdev_indirect_ops &&
+				    ops != &vdev_indirect_ops &&
+				    ops != &vdev_draid_spare_ops &&
 				    !vdev_dtl_contains(mc->mc_vd, DTL_PARTIAL,
 				    zio->io_txg, 1))
 					continue;
@@ -796,50 +865,90 @@ vdev_mirror_state_change(vdev_t *vd, int faulted, int degraded)
 	}
 }
 
+/*
+ * Return the maximum asize for a rebuild zio in the provided range.
+ */
+static uint64_t
+vdev_mirror_rebuild_asize(vdev_t *vd, uint64_t start, uint64_t asize,
+    uint64_t max_segment)
+{
+	uint64_t psize = MIN(P2ROUNDUP(max_segment, 1 << vd->vdev_ashift),
+	    SPA_MAXBLOCKSIZE);
+
+	return (MIN(asize, vdev_psize_to_asize(vd, psize)));
+}
+
 vdev_ops_t vdev_mirror_ops = {
+	.vdev_op_init = NULL,
+	.vdev_op_fini = NULL,
 	.vdev_op_open = vdev_mirror_open,
 	.vdev_op_close = vdev_mirror_close,
 	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = vdev_mirror_io_start,
 	.vdev_op_io_done = vdev_mirror_io_done,
 	.vdev_op_state_change = vdev_mirror_state_change,
-	.vdev_op_need_resilver = NULL,
+	.vdev_op_need_resilver = vdev_default_need_resilver,
 	.vdev_op_hold = NULL,
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = NULL,
 	.vdev_op_xlate = vdev_default_xlate,
+	.vdev_op_rebuild_asize = vdev_mirror_rebuild_asize,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = NULL,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
 	.vdev_op_type = VDEV_TYPE_MIRROR,	/* name of this vdev type */
 	.vdev_op_leaf = B_FALSE			/* not a leaf vdev */
 };
 
 vdev_ops_t vdev_replacing_ops = {
+	.vdev_op_init = NULL,
+	.vdev_op_fini = NULL,
 	.vdev_op_open = vdev_mirror_open,
 	.vdev_op_close = vdev_mirror_close,
 	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = vdev_mirror_io_start,
 	.vdev_op_io_done = vdev_mirror_io_done,
 	.vdev_op_state_change = vdev_mirror_state_change,
-	.vdev_op_need_resilver = NULL,
+	.vdev_op_need_resilver = vdev_default_need_resilver,
 	.vdev_op_hold = NULL,
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = NULL,
 	.vdev_op_xlate = vdev_default_xlate,
+	.vdev_op_rebuild_asize = vdev_mirror_rebuild_asize,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = NULL,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
 	.vdev_op_type = VDEV_TYPE_REPLACING,	/* name of this vdev type */
 	.vdev_op_leaf = B_FALSE			/* not a leaf vdev */
 };
 
 vdev_ops_t vdev_spare_ops = {
+	.vdev_op_init = NULL,
+	.vdev_op_fini = NULL,
 	.vdev_op_open = vdev_mirror_open,
 	.vdev_op_close = vdev_mirror_close,
 	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = vdev_mirror_io_start,
 	.vdev_op_io_done = vdev_mirror_io_done,
 	.vdev_op_state_change = vdev_mirror_state_change,
-	.vdev_op_need_resilver = NULL,
+	.vdev_op_need_resilver = vdev_default_need_resilver,
 	.vdev_op_hold = NULL,
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = NULL,
 	.vdev_op_xlate = vdev_default_xlate,
+	.vdev_op_rebuild_asize = vdev_mirror_rebuild_asize,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = NULL,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
 	.vdev_op_type = VDEV_TYPE_SPARE,	/* name of this vdev type */
 	.vdev_op_leaf = B_FALSE			/* not a leaf vdev */
 };
diff --git a/module/zfs/vdev_missing.c b/module/zfs/vdev_missing.c
index ce90df6e8..e9145fd01 100644
--- a/module/zfs/vdev_missing.c
+++ b/module/zfs/vdev_missing.c
@@ -81,9 +81,13 @@ vdev_missing_io_done(zio_t *zio)
 }
 
 vdev_ops_t vdev_missing_ops = {
+	.vdev_op_init = NULL,
+	.vdev_op_fini = NULL,
 	.vdev_op_open = vdev_missing_open,
 	.vdev_op_close = vdev_missing_close,
 	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = vdev_missing_io_start,
 	.vdev_op_io_done = vdev_missing_io_done,
 	.vdev_op_state_change = NULL,
@@ -92,14 +96,23 @@ vdev_ops_t vdev_missing_ops = {
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = NULL,
 	.vdev_op_xlate = NULL,
+	.vdev_op_rebuild_asize = NULL,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = NULL,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
 	.vdev_op_type = VDEV_TYPE_MISSING,	/* name of this vdev type */
 	.vdev_op_leaf = B_TRUE			/* leaf vdev */
 };
 
 vdev_ops_t vdev_hole_ops = {
+	.vdev_op_init = NULL,
+	.vdev_op_fini = NULL,
 	.vdev_op_open = vdev_missing_open,
 	.vdev_op_close = vdev_missing_close,
 	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = vdev_missing_io_start,
 	.vdev_op_io_done = vdev_missing_io_done,
 	.vdev_op_state_change = NULL,
@@ -108,6 +121,11 @@ vdev_ops_t vdev_hole_ops = {
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = NULL,
 	.vdev_op_xlate = NULL,
+	.vdev_op_rebuild_asize = NULL,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = NULL,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
 	.vdev_op_type = VDEV_TYPE_HOLE,		/* name of this vdev type */
 	.vdev_op_leaf = B_TRUE			/* leaf vdev */
 };
diff --git a/module/zfs/vdev_queue.c b/module/zfs/vdev_queue.c
index a8ef3d747..45d92819d 100644
--- a/module/zfs/vdev_queue.c
+++ b/module/zfs/vdev_queue.c
@@ -593,6 +593,13 @@ vdev_queue_aggregate(vdev_queue_t *vq, zio_t *zio)
 	if (zio->io_type == ZIO_TYPE_TRIM && !zfs_vdev_aggregate_trim)
 		return (NULL);
 
+	/*
+	 * I/Os to distributed spares are directly dispatched to the dRAID
+	 * leaf vdevs for aggregation.  See the comment at the end of the
+	 * zio_vdev_io_start() function.
+	 */
+	ASSERT(vq->vq_vdev->vdev_ops != &vdev_draid_spare_ops);
+
 	first = last = zio;
 
 	if (zio->io_type == ZIO_TYPE_READ)
diff --git a/module/zfs/vdev_raidz.c b/module/zfs/vdev_raidz.c
index 47312e02f..989b90dc2 100644
--- a/module/zfs/vdev_raidz.c
+++ b/module/zfs/vdev_raidz.c
@@ -35,6 +35,7 @@
 #include <sys/fm/fs/zfs.h>
 #include <sys/vdev_raidz.h>
 #include <sys/vdev_raidz_impl.h>
+#include <sys/vdev_draid.h>
 
 #ifdef ZFS_DEBUG
 #include <sys/vdev.h>	/* For vdev_xlate() in vdev_raidz_io_verify() */
@@ -134,25 +135,51 @@
 	VDEV_RAIDZ_64MUL_2((x), mask); \
 }
 
-void
-vdev_raidz_map_free(raidz_map_t *rm)
+static void
+vdev_raidz_row_free(raidz_row_t *rr)
 {
 	int c;
 
-	for (c = 0; c < rm->rm_firstdatacol; c++) {
-		abd_free(rm->rm_col[c].rc_abd);
+	for (c = 0; c < rr->rr_firstdatacol && c < rr->rr_cols; c++) {
+		abd_free(rr->rr_col[c].rc_abd);
 
-		if (rm->rm_col[c].rc_gdata != NULL)
-			abd_free(rm->rm_col[c].rc_gdata);
+		if (rr->rr_col[c].rc_gdata != NULL) {
+			abd_free(rr->rr_col[c].rc_gdata);
+		}
+		if (rr->rr_col[c].rc_orig_data != NULL) {
+			zio_buf_free(rr->rr_col[c].rc_orig_data,
+			    rr->rr_col[c].rc_size);
+		}
 	}
+	for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		if (rr->rr_col[c].rc_size != 0) {
+			if (abd_is_gang(rr->rr_col[c].rc_abd))
+				abd_free(rr->rr_col[c].rc_abd);
+			else
+				abd_put(rr->rr_col[c].rc_abd);
+		}
+		if (rr->rr_col[c].rc_orig_data != NULL) {
+			zio_buf_free(rr->rr_col[c].rc_orig_data,
+			    rr->rr_col[c].rc_size);
+		}
+	}
+
+	if (rr->rr_abd_copy != NULL)
+		abd_free(rr->rr_abd_copy);
 
-	for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++)
-		abd_put(rm->rm_col[c].rc_abd);
+	if (rr->rr_abd_empty != NULL)
+		abd_free(rr->rr_abd_empty);
+
+	kmem_free(rr, offsetof(raidz_row_t, rr_col[rr->rr_scols]));
+}
 
-	if (rm->rm_abd_copy != NULL)
-		abd_free(rm->rm_abd_copy);
+void
+vdev_raidz_map_free(raidz_map_t *rm)
+{
+	for (int i = 0; i < rm->rm_nrows; i++)
+		vdev_raidz_row_free(rm->rm_row[i]);
 
-	kmem_free(rm, offsetof(raidz_map_t, rm_col[rm->rm_scols]));
+	kmem_free(rm, offsetof(raidz_map_t, rm_row[rm->rm_nrows]));
 }
 
 static void
@@ -161,10 +188,11 @@ vdev_raidz_map_free_vsd(zio_t *zio)
 	raidz_map_t *rm = zio->io_vsd;
 
 	ASSERT0(rm->rm_freed);
-	rm->rm_freed = 1;
+	rm->rm_freed = B_TRUE;
 
-	if (rm->rm_reports == 0)
+	if (rm->rm_reports == 0) {
 		vdev_raidz_map_free(rm);
+	}
 }
 
 /*ARGSUSED*/
@@ -175,7 +203,7 @@ vdev_raidz_cksum_free(void *arg, size_t ignored)
 
 	ASSERT3U(rm->rm_reports, >, 0);
 
-	if (--rm->rm_reports == 0 && rm->rm_freed != 0)
+	if (--rm->rm_reports == 0 && rm->rm_freed)
 		vdev_raidz_map_free(rm);
 }
 
@@ -186,77 +214,79 @@ vdev_raidz_cksum_finish(zio_cksum_report_t *zcr, const abd_t *good_data)
 	const size_t c = zcr->zcr_cbinfo;
 	size_t x, offset;
 
-	const abd_t *good = NULL;
-	const abd_t *bad = rm->rm_col[c].rc_abd;
-
 	if (good_data == NULL) {
 		zfs_ereport_finish_checksum(zcr, NULL, NULL, B_FALSE);
 		return;
 	}
 
-	if (c < rm->rm_firstdatacol) {
+	ASSERT3U(rm->rm_nrows, ==, 1);
+	raidz_row_t *rr = rm->rm_row[0];
+
+	const abd_t *good = NULL;
+	const abd_t *bad = rr->rr_col[c].rc_abd;
+
+	if (c < rr->rr_firstdatacol) {
 		/*
 		 * The first time through, calculate the parity blocks for
 		 * the good data (this relies on the fact that the good
 		 * data never changes for a given logical ZIO)
 		 */
-		if (rm->rm_col[0].rc_gdata == NULL) {
+		if (rr->rr_col[0].rc_gdata == NULL) {
 			abd_t *bad_parity[VDEV_RAIDZ_MAXPARITY];
 
 			/*
-			 * Set up the rm_col[]s to generate the parity for
+			 * Set up the rr_col[]s to generate the parity for
 			 * good_data, first saving the parity bufs and
 			 * replacing them with buffers to hold the result.
 			 */
-			for (x = 0; x < rm->rm_firstdatacol; x++) {
-				bad_parity[x] = rm->rm_col[x].rc_abd;
-				rm->rm_col[x].rc_abd =
-				    rm->rm_col[x].rc_gdata =
-				    abd_alloc_sametype(rm->rm_col[x].rc_abd,
-				    rm->rm_col[x].rc_size);
+			for (x = 0; x < rr->rr_firstdatacol; x++) {
+				bad_parity[x] = rr->rr_col[x].rc_abd;
+				rr->rr_col[x].rc_abd = rr->rr_col[x].rc_gdata =
+				    abd_alloc_sametype(rr->rr_col[x].rc_abd,
+				    rr->rr_col[x].rc_size);
 			}
 
 			/* fill in the data columns from good_data */
 			offset = 0;
-			for (; x < rm->rm_cols; x++) {
-				abd_put(rm->rm_col[x].rc_abd);
+			for (; x < rr->rr_cols; x++) {
+				abd_put(rr->rr_col[x].rc_abd);
 
-				rm->rm_col[x].rc_abd =
+				rr->rr_col[x].rc_abd =
 				    abd_get_offset_size((abd_t *)good_data,
-				    offset, rm->rm_col[x].rc_size);
-				offset += rm->rm_col[x].rc_size;
+				    offset, rr->rr_col[x].rc_size);
+				offset += rr->rr_col[x].rc_size;
 			}
 
 			/*
 			 * Construct the parity from the good data.
 			 */
-			vdev_raidz_generate_parity(rm);
+			vdev_raidz_generate_parity_row(rm, rr);
 
 			/* restore everything back to its original state */
-			for (x = 0; x < rm->rm_firstdatacol; x++)
-				rm->rm_col[x].rc_abd = bad_parity[x];
+			for (x = 0; x < rr->rr_firstdatacol; x++)
+				rr->rr_col[x].rc_abd = bad_parity[x];
 
 			offset = 0;
-			for (x = rm->rm_firstdatacol; x < rm->rm_cols; x++) {
-				abd_put(rm->rm_col[x].rc_abd);
-				rm->rm_col[x].rc_abd = abd_get_offset_size(
-				    rm->rm_abd_copy, offset,
-				    rm->rm_col[x].rc_size);
-				offset += rm->rm_col[x].rc_size;
+			for (x = rr->rr_firstdatacol; x < rr->rr_cols; x++) {
+				abd_put(rr->rr_col[x].rc_abd);
+				rr->rr_col[x].rc_abd = abd_get_offset_size(
+				    rr->rr_abd_copy, offset,
+				    rr->rr_col[x].rc_size);
+				offset += rr->rr_col[x].rc_size;
 			}
 		}
 
-		ASSERT3P(rm->rm_col[c].rc_gdata, !=, NULL);
-		good = abd_get_offset_size(rm->rm_col[c].rc_gdata, 0,
-		    rm->rm_col[c].rc_size);
+		ASSERT3P(rr->rr_col[c].rc_gdata, !=, NULL);
+		good = abd_get_offset_size(rr->rr_col[c].rc_gdata, 0,
+		    rr->rr_col[c].rc_size);
 	} else {
 		/* adjust good_data to point at the start of our column */
 		offset = 0;
-		for (x = rm->rm_firstdatacol; x < c; x++)
-			offset += rm->rm_col[x].rc_size;
+		for (x = rr->rr_firstdatacol; x < c; x++)
+			offset += rr->rr_col[x].rc_size;
 
 		good = abd_get_offset_size((abd_t *)good_data, offset,
-		    rm->rm_col[c].rc_size);
+		    rr->rr_col[c].rc_size);
 	}
 
 	/* we drop the ereport if it ends up that the data was good */
@@ -274,10 +304,7 @@ static void
 vdev_raidz_cksum_report(zio_t *zio, zio_cksum_report_t *zcr, void *arg)
 {
 	size_t c = (size_t)(uintptr_t)arg;
-	size_t offset;
-
 	raidz_map_t *rm = zio->io_vsd;
-	size_t size;
 
 	/* set up the report and bump the refcount  */
 	zcr->zcr_cbdata = rm;
@@ -287,8 +314,9 @@ vdev_raidz_cksum_report(zio_t *zio, zio_cksum_report_t *zcr, void *arg)
 
 	rm->rm_reports++;
 	ASSERT3U(rm->rm_reports, >, 0);
+	ASSERT3U(rm->rm_nrows, ==, 1);
 
-	if (rm->rm_abd_copy != NULL)
+	if (rm->rm_row[0]->rr_abd_copy != NULL)
 		return;
 
 	/*
@@ -299,26 +327,30 @@ vdev_raidz_cksum_report(zio_t *zio, zio_cksum_report_t *zcr, void *arg)
 	 * Our parity data is already in separate buffers, so there's no need
 	 * to copy them.
 	 */
+	for (int i = 0; i < rm->rm_nrows; i++) {
+		raidz_row_t *rr = rm->rm_row[i];
+		size_t offset = 0;
+		size_t size = 0;
 
-	size = 0;
-	for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++)
-		size += rm->rm_col[c].rc_size;
+		for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++)
+			size += rr->rr_col[c].rc_size;
 
-	rm->rm_abd_copy = abd_alloc_for_io(size, B_FALSE);
+		rr->rr_abd_copy = abd_alloc_for_io(size, B_FALSE);
 
-	for (offset = 0, c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-		raidz_col_t *col = &rm->rm_col[c];
-		abd_t *tmp = abd_get_offset_size(rm->rm_abd_copy, offset,
-		    col->rc_size);
+		for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+			raidz_col_t *col = &rr->rr_col[c];
+			abd_t *tmp = abd_get_offset_size(rr->rr_abd_copy,
+			    offset, col->rc_size);
 
-		abd_copy(tmp, col->rc_abd, col->rc_size);
+			abd_copy(tmp, col->rc_abd, col->rc_size);
 
-		abd_put(col->rc_abd);
-		col->rc_abd = tmp;
+			abd_put(col->rc_abd);
+			col->rc_abd = tmp;
 
-		offset += col->rc_size;
+			offset += col->rc_size;
+		}
+		ASSERT3U(offset, ==, size);
 	}
-	ASSERT3U(offset, ==, size);
 }
 
 static const zio_vsd_ops_t vdev_raidz_vsd_ops = {
@@ -337,7 +369,7 @@ noinline raidz_map_t *
 vdev_raidz_map_alloc(zio_t *zio, uint64_t ashift, uint64_t dcols,
     uint64_t nparity)
 {
-	raidz_map_t *rm;
+	raidz_row_t *rr;
 	/* The starting RAIDZ (parent) vdev sector of the block. */
 	uint64_t b = zio->io_offset >> ashift;
 	/* The zio's size in units of the vdev's minimum sector size. */
@@ -349,6 +381,10 @@ vdev_raidz_map_alloc(zio_t *zio, uint64_t ashift, uint64_t dcols,
 	uint64_t q, r, c, bc, col, acols, scols, coff, devidx, asize, tot;
 	uint64_t off = 0;
 
+	raidz_map_t *rm =
+	    kmem_zalloc(offsetof(raidz_map_t, rm_row[1]), KM_SLEEP);
+	rm->rm_nrows = 1;
+
 	/*
 	 * "Quotient": The number of data sectors for this stripe on all but
 	 * the "big column" child vdevs that also contain "remainder" data.
@@ -370,8 +406,10 @@ vdev_raidz_map_alloc(zio_t *zio, uint64_t ashift, uint64_t dcols,
 	 */
 	tot = s + nparity * (q + (r == 0 ? 0 : 1));
 
-	/* acols: The columns that will be accessed. */
-	/* scols: The columns that will be accessed or skipped. */
+	/*
+	 * acols: The columns that will be accessed.
+	 * scols: The columns that will be accessed or skipped.
+	 */
 	if (q == 0) {
 		/* Our I/O request doesn't span all child vdevs. */
 		acols = bc;
@@ -383,65 +421,70 @@ vdev_raidz_map_alloc(zio_t *zio, uint64_t ashift, uint64_t dcols,
 
 	ASSERT3U(acols, <=, scols);
 
-	rm = kmem_alloc(offsetof(raidz_map_t, rm_col[scols]), KM_SLEEP);
-
-	rm->rm_cols = acols;
-	rm->rm_scols = scols;
-	rm->rm_bigcols = bc;
-	rm->rm_skipstart = bc;
-	rm->rm_missingdata = 0;
-	rm->rm_missingparity = 0;
-	rm->rm_firstdatacol = nparity;
-	rm->rm_abd_copy = NULL;
-	rm->rm_reports = 0;
-	rm->rm_freed = 0;
-	rm->rm_ecksuminjected = 0;
+	rr = kmem_alloc(offsetof(raidz_row_t, rr_col[scols]), KM_SLEEP);
+	rm->rm_row[0] = rr;
+
+	rr->rr_cols = acols;
+	rr->rr_scols = scols;
+	rr->rr_bigcols = bc;
+	rr->rr_missingdata = 0;
+	rr->rr_missingparity = 0;
+	rr->rr_firstdatacol = nparity;
+	rr->rr_abd_copy = NULL;
+	rr->rr_abd_empty = NULL;
+	rr->rr_nempty = 0;
+#ifdef ZFS_DEBUG
+	rr->rr_offset = zio->io_offset;
+	rr->rr_size = zio->io_size;
+#endif
 
 	asize = 0;
 
 	for (c = 0; c < scols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
 		col = f + c;
 		coff = o;
 		if (col >= dcols) {
 			col -= dcols;
 			coff += 1ULL << ashift;
 		}
-		rm->rm_col[c].rc_devidx = col;
-		rm->rm_col[c].rc_offset = coff;
-		rm->rm_col[c].rc_abd = NULL;
-		rm->rm_col[c].rc_gdata = NULL;
-		rm->rm_col[c].rc_error = 0;
-		rm->rm_col[c].rc_tried = 0;
-		rm->rm_col[c].rc_skipped = 0;
+		rc->rc_devidx = col;
+		rc->rc_offset = coff;
+		rc->rc_abd = NULL;
+		rc->rc_gdata = NULL;
+		rc->rc_orig_data = NULL;
+		rc->rc_error = 0;
+		rc->rc_tried = 0;
+		rc->rc_skipped = 0;
+		rc->rc_repair = 0;
+		rc->rc_need_orig_restore = B_FALSE;
 
 		if (c >= acols)
-			rm->rm_col[c].rc_size = 0;
+			rc->rc_size = 0;
 		else if (c < bc)
-			rm->rm_col[c].rc_size = (q + 1) << ashift;
+			rc->rc_size = (q + 1) << ashift;
 		else
-			rm->rm_col[c].rc_size = q << ashift;
+			rc->rc_size = q << ashift;
 
-		asize += rm->rm_col[c].rc_size;
+		asize += rc->rc_size;
 	}
 
 	ASSERT3U(asize, ==, tot << ashift);
-	rm->rm_asize = roundup(asize, (nparity + 1) << ashift);
 	rm->rm_nskip = roundup(tot, nparity + 1) - tot;
-	ASSERT3U(rm->rm_asize - asize, ==, rm->rm_nskip << ashift);
-	ASSERT3U(rm->rm_nskip, <=, nparity);
+	rm->rm_skipstart = bc;
 
-	for (c = 0; c < rm->rm_firstdatacol; c++)
-		rm->rm_col[c].rc_abd =
-		    abd_alloc_linear(rm->rm_col[c].rc_size, B_FALSE);
+	for (c = 0; c < rr->rr_firstdatacol; c++)
+		rr->rr_col[c].rc_abd =
+		    abd_alloc_linear(rr->rr_col[c].rc_size, B_FALSE);
 
-	rm->rm_col[c].rc_abd = abd_get_offset_size(zio->io_abd, 0,
-	    rm->rm_col[c].rc_size);
-	off = rm->rm_col[c].rc_size;
+	rr->rr_col[c].rc_abd = abd_get_offset_size(zio->io_abd, 0,
+	    rr->rr_col[c].rc_size);
+	off = rr->rr_col[c].rc_size;
 
 	for (c = c + 1; c < acols; c++) {
-		rm->rm_col[c].rc_abd = abd_get_offset_size(zio->io_abd, off,
-		    rm->rm_col[c].rc_size);
-		off += rm->rm_col[c].rc_size;
+		raidz_col_t *rc = &rr->rr_col[c];
+		rc->rc_abd = abd_get_offset_size(zio->io_abd, off, rc->rc_size);
+		off += rc->rc_size;
 	}
 
 	/*
@@ -464,24 +507,21 @@ vdev_raidz_map_alloc(zio_t *zio, uint64_t ashift, uint64_t dcols,
 	 * skip the first column since at least one data and one parity
 	 * column must appear in each row.
 	 */
-	ASSERT(rm->rm_cols >= 2);
-	ASSERT(rm->rm_col[0].rc_size == rm->rm_col[1].rc_size);
+	ASSERT(rr->rr_cols >= 2);
+	ASSERT(rr->rr_col[0].rc_size == rr->rr_col[1].rc_size);
 
-	if (rm->rm_firstdatacol == 1 && (zio->io_offset & (1ULL << 20))) {
-		devidx = rm->rm_col[0].rc_devidx;
-		o = rm->rm_col[0].rc_offset;
-		rm->rm_col[0].rc_devidx = rm->rm_col[1].rc_devidx;
-		rm->rm_col[0].rc_offset = rm->rm_col[1].rc_offset;
-		rm->rm_col[1].rc_devidx = devidx;
-		rm->rm_col[1].rc_offset = o;
+	if (rr->rr_firstdatacol == 1 && (zio->io_offset & (1ULL << 20))) {
+		devidx = rr->rr_col[0].rc_devidx;
+		o = rr->rr_col[0].rc_offset;
+		rr->rr_col[0].rc_devidx = rr->rr_col[1].rc_devidx;
+		rr->rr_col[0].rc_offset = rr->rr_col[1].rc_offset;
+		rr->rr_col[1].rc_devidx = devidx;
+		rr->rr_col[1].rc_offset = o;
 
 		if (rm->rm_skipstart == 0)
 			rm->rm_skipstart = 1;
 	}
 
-	zio->io_vsd = rm;
-	zio->io_vsd_ops = &vdev_raidz_vsd_ops;
-
 	/* init RAIDZ parity ops */
 	rm->rm_ops = vdev_raidz_math_get_ops();
 
@@ -550,50 +590,43 @@ vdev_raidz_pqr_func(void *buf, size_t size, void *private)
 }
 
 static void
-vdev_raidz_generate_parity_p(raidz_map_t *rm)
+vdev_raidz_generate_parity_p(raidz_row_t *rr)
 {
-	uint64_t *p;
-	int c;
-	abd_t *src;
+	uint64_t *p = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd);
 
-	for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-		src = rm->rm_col[c].rc_abd;
-		p = abd_to_buf(rm->rm_col[VDEV_RAIDZ_P].rc_abd);
+	for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		abd_t *src = rr->rr_col[c].rc_abd;
 
-		if (c == rm->rm_firstdatacol) {
-			abd_copy_to_buf(p, src, rm->rm_col[c].rc_size);
+		if (c == rr->rr_firstdatacol) {
+			abd_copy_to_buf(p, src, rr->rr_col[c].rc_size);
 		} else {
 			struct pqr_struct pqr = { p, NULL, NULL };
-			(void) abd_iterate_func(src, 0, rm->rm_col[c].rc_size,
+			(void) abd_iterate_func(src, 0, rr->rr_col[c].rc_size,
 			    vdev_raidz_p_func, &pqr);
 		}
 	}
 }
 
 static void
-vdev_raidz_generate_parity_pq(raidz_map_t *rm)
+vdev_raidz_generate_parity_pq(raidz_row_t *rr)
 {
-	uint64_t *p, *q, pcnt, ccnt, mask, i;
-	int c;
-	abd_t *src;
-
-	pcnt = rm->rm_col[VDEV_RAIDZ_P].rc_size / sizeof (p[0]);
-	ASSERT(rm->rm_col[VDEV_RAIDZ_P].rc_size ==
-	    rm->rm_col[VDEV_RAIDZ_Q].rc_size);
+	uint64_t *p = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd);
+	uint64_t *q = abd_to_buf(rr->rr_col[VDEV_RAIDZ_Q].rc_abd);
+	uint64_t pcnt = rr->rr_col[VDEV_RAIDZ_P].rc_size / sizeof (p[0]);
+	ASSERT(rr->rr_col[VDEV_RAIDZ_P].rc_size ==
+	    rr->rr_col[VDEV_RAIDZ_Q].rc_size);
 
-	for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-		src = rm->rm_col[c].rc_abd;
-		p = abd_to_buf(rm->rm_col[VDEV_RAIDZ_P].rc_abd);
-		q = abd_to_buf(rm->rm_col[VDEV_RAIDZ_Q].rc_abd);
+	for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		abd_t *src = rr->rr_col[c].rc_abd;
 
-		ccnt = rm->rm_col[c].rc_size / sizeof (p[0]);
+		uint64_t ccnt = rr->rr_col[c].rc_size / sizeof (p[0]);
 
-		if (c == rm->rm_firstdatacol) {
+		if (c == rr->rr_firstdatacol) {
 			ASSERT(ccnt == pcnt || ccnt == 0);
-			abd_copy_to_buf(p, src, rm->rm_col[c].rc_size);
-			(void) memcpy(q, p, rm->rm_col[c].rc_size);
+			abd_copy_to_buf(p, src, rr->rr_col[c].rc_size);
+			(void) memcpy(q, p, rr->rr_col[c].rc_size);
 
-			for (i = ccnt; i < pcnt; i++) {
+			for (uint64_t i = ccnt; i < pcnt; i++) {
 				p[i] = 0;
 				q[i] = 0;
 			}
@@ -601,14 +634,15 @@ vdev_raidz_generate_parity_pq(raidz_map_t *rm)
 			struct pqr_struct pqr = { p, q, NULL };
 
 			ASSERT(ccnt <= pcnt);
-			(void) abd_iterate_func(src, 0, rm->rm_col[c].rc_size,
+			(void) abd_iterate_func(src, 0, rr->rr_col[c].rc_size,
 			    vdev_raidz_pq_func, &pqr);
 
 			/*
 			 * Treat short columns as though they are full of 0s.
 			 * Note that there's therefore nothing needed for P.
 			 */
-			for (i = ccnt; i < pcnt; i++) {
+			uint64_t mask;
+			for (uint64_t i = ccnt; i < pcnt; i++) {
 				VDEV_RAIDZ_64MUL_2(q[i], mask);
 			}
 		}
@@ -616,33 +650,29 @@ vdev_raidz_generate_parity_pq(raidz_map_t *rm)
 }
 
 static void
-vdev_raidz_generate_parity_pqr(raidz_map_t *rm)
+vdev_raidz_generate_parity_pqr(raidz_row_t *rr)
 {
-	uint64_t *p, *q, *r, pcnt, ccnt, mask, i;
-	int c;
-	abd_t *src;
-
-	pcnt = rm->rm_col[VDEV_RAIDZ_P].rc_size / sizeof (p[0]);
-	ASSERT(rm->rm_col[VDEV_RAIDZ_P].rc_size ==
-	    rm->rm_col[VDEV_RAIDZ_Q].rc_size);
-	ASSERT(rm->rm_col[VDEV_RAIDZ_P].rc_size ==
-	    rm->rm_col[VDEV_RAIDZ_R].rc_size);
+	uint64_t *p = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd);
+	uint64_t *q = abd_to_buf(rr->rr_col[VDEV_RAIDZ_Q].rc_abd);
+	uint64_t *r = abd_to_buf(rr->rr_col[VDEV_RAIDZ_R].rc_abd);
+	uint64_t pcnt = rr->rr_col[VDEV_RAIDZ_P].rc_size / sizeof (p[0]);
+	ASSERT(rr->rr_col[VDEV_RAIDZ_P].rc_size ==
+	    rr->rr_col[VDEV_RAIDZ_Q].rc_size);
+	ASSERT(rr->rr_col[VDEV_RAIDZ_P].rc_size ==
+	    rr->rr_col[VDEV_RAIDZ_R].rc_size);
 
-	for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-		src = rm->rm_col[c].rc_abd;
-		p = abd_to_buf(rm->rm_col[VDEV_RAIDZ_P].rc_abd);
-		q = abd_to_buf(rm->rm_col[VDEV_RAIDZ_Q].rc_abd);
-		r = abd_to_buf(rm->rm_col[VDEV_RAIDZ_R].rc_abd);
+	for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		abd_t *src = rr->rr_col[c].rc_abd;
 
-		ccnt = rm->rm_col[c].rc_size / sizeof (p[0]);
+		uint64_t ccnt = rr->rr_col[c].rc_size / sizeof (p[0]);
 
-		if (c == rm->rm_firstdatacol) {
+		if (c == rr->rr_firstdatacol) {
 			ASSERT(ccnt == pcnt || ccnt == 0);
-			abd_copy_to_buf(p, src, rm->rm_col[c].rc_size);
-			(void) memcpy(q, p, rm->rm_col[c].rc_size);
-			(void) memcpy(r, p, rm->rm_col[c].rc_size);
+			abd_copy_to_buf(p, src, rr->rr_col[c].rc_size);
+			(void) memcpy(q, p, rr->rr_col[c].rc_size);
+			(void) memcpy(r, p, rr->rr_col[c].rc_size);
 
-			for (i = ccnt; i < pcnt; i++) {
+			for (uint64_t i = ccnt; i < pcnt; i++) {
 				p[i] = 0;
 				q[i] = 0;
 				r[i] = 0;
@@ -651,14 +681,15 @@ vdev_raidz_generate_parity_pqr(raidz_map_t *rm)
 			struct pqr_struct pqr = { p, q, r };
 
 			ASSERT(ccnt <= pcnt);
-			(void) abd_iterate_func(src, 0, rm->rm_col[c].rc_size,
+			(void) abd_iterate_func(src, 0, rr->rr_col[c].rc_size,
 			    vdev_raidz_pqr_func, &pqr);
 
 			/*
 			 * Treat short columns as though they are full of 0s.
 			 * Note that there's therefore nothing needed for P.
 			 */
-			for (i = ccnt; i < pcnt; i++) {
+			uint64_t mask;
+			for (uint64_t i = ccnt; i < pcnt; i++) {
 				VDEV_RAIDZ_64MUL_2(q[i], mask);
 				VDEV_RAIDZ_64MUL_4(r[i], mask);
 			}
@@ -671,27 +702,38 @@ vdev_raidz_generate_parity_pqr(raidz_map_t *rm)
  * parity columns available.
  */
 void
-vdev_raidz_generate_parity(raidz_map_t *rm)
+vdev_raidz_generate_parity_row(raidz_map_t *rm, raidz_row_t *rr)
 {
+	ASSERT3U(rr->rr_cols, !=, 0);
+
 	/* Generate using the new math implementation */
-	if (vdev_raidz_math_generate(rm) != RAIDZ_ORIGINAL_IMPL)
+	if (vdev_raidz_math_generate(rm, rr) != RAIDZ_ORIGINAL_IMPL)
 		return;
 
-	switch (rm->rm_firstdatacol) {
+	switch (rr->rr_firstdatacol) {
 	case 1:
-		vdev_raidz_generate_parity_p(rm);
+		vdev_raidz_generate_parity_p(rr);
 		break;
 	case 2:
-		vdev_raidz_generate_parity_pq(rm);
+		vdev_raidz_generate_parity_pq(rr);
 		break;
 	case 3:
-		vdev_raidz_generate_parity_pqr(rm);
+		vdev_raidz_generate_parity_pqr(rr);
 		break;
 	default:
 		cmn_err(CE_PANIC, "invalid RAID-Z configuration");
 	}
 }
 
+void
+vdev_raidz_generate_parity(raidz_map_t *rm)
+{
+	for (int i = 0; i < rm->rm_nrows; i++) {
+		raidz_row_t *rr = rm->rm_row[i];
+		vdev_raidz_generate_parity_row(rm, rr);
+	}
+}
+
 /* ARGSUSED */
 static int
 vdev_raidz_reconst_p_func(void *dbuf, void *sbuf, size_t size, void *private)
@@ -809,30 +851,27 @@ vdev_raidz_reconst_pq_tail_func(void *xbuf, size_t size, void *private)
 }
 
 static int
-vdev_raidz_reconstruct_p(raidz_map_t *rm, int *tgts, int ntgts)
+vdev_raidz_reconstruct_p(raidz_row_t *rr, int *tgts, int ntgts)
 {
 	int x = tgts[0];
-	int c;
 	abd_t *dst, *src;
 
-	ASSERT(ntgts == 1);
-	ASSERT(x >= rm->rm_firstdatacol);
-	ASSERT(x < rm->rm_cols);
+	ASSERT3U(ntgts, ==, 1);
+	ASSERT3U(x, >=, rr->rr_firstdatacol);
+	ASSERT3U(x, <, rr->rr_cols);
 
-	ASSERT(rm->rm_col[x].rc_size <= rm->rm_col[VDEV_RAIDZ_P].rc_size);
-	ASSERT(rm->rm_col[x].rc_size > 0);
+	ASSERT3U(rr->rr_col[x].rc_size, <=, rr->rr_col[VDEV_RAIDZ_P].rc_size);
 
-	src = rm->rm_col[VDEV_RAIDZ_P].rc_abd;
-	dst = rm->rm_col[x].rc_abd;
+	src = rr->rr_col[VDEV_RAIDZ_P].rc_abd;
+	dst = rr->rr_col[x].rc_abd;
 
-	abd_copy_from_buf(dst, abd_to_buf(src), rm->rm_col[x].rc_size);
+	abd_copy_from_buf(dst, abd_to_buf(src), rr->rr_col[x].rc_size);
 
-	for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-		uint64_t size = MIN(rm->rm_col[x].rc_size,
-		    rm->rm_col[c].rc_size);
+	for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		uint64_t size = MIN(rr->rr_col[x].rc_size,
+		    rr->rr_col[c].rc_size);
 
-		src = rm->rm_col[c].rc_abd;
-		dst = rm->rm_col[x].rc_abd;
+		src = rr->rr_col[c].rc_abd;
 
 		if (c == x)
 			continue;
@@ -845,7 +884,7 @@ vdev_raidz_reconstruct_p(raidz_map_t *rm, int *tgts, int ntgts)
 }
 
 static int
-vdev_raidz_reconstruct_q(raidz_map_t *rm, int *tgts, int ntgts)
+vdev_raidz_reconstruct_q(raidz_row_t *rr, int *tgts, int ntgts)
 {
 	int x = tgts[0];
 	int c, exp;
@@ -853,44 +892,44 @@ vdev_raidz_reconstruct_q(raidz_map_t *rm, int *tgts, int ntgts)
 
 	ASSERT(ntgts == 1);
 
-	ASSERT(rm->rm_col[x].rc_size <= rm->rm_col[VDEV_RAIDZ_Q].rc_size);
+	ASSERT(rr->rr_col[x].rc_size <= rr->rr_col[VDEV_RAIDZ_Q].rc_size);
 
-	for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-		uint64_t size = (c == x) ? 0 : MIN(rm->rm_col[x].rc_size,
-		    rm->rm_col[c].rc_size);
+	for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		uint64_t size = (c == x) ? 0 : MIN(rr->rr_col[x].rc_size,
+		    rr->rr_col[c].rc_size);
 
-		src = rm->rm_col[c].rc_abd;
-		dst = rm->rm_col[x].rc_abd;
+		src = rr->rr_col[c].rc_abd;
+		dst = rr->rr_col[x].rc_abd;
 
-		if (c == rm->rm_firstdatacol) {
+		if (c == rr->rr_firstdatacol) {
 			abd_copy(dst, src, size);
-			if (rm->rm_col[x].rc_size > size)
+			if (rr->rr_col[x].rc_size > size) {
 				abd_zero_off(dst, size,
-				    rm->rm_col[x].rc_size - size);
-
+				    rr->rr_col[x].rc_size - size);
+			}
 		} else {
-			ASSERT3U(size, <=, rm->rm_col[x].rc_size);
+			ASSERT3U(size, <=, rr->rr_col[x].rc_size);
 			(void) abd_iterate_func2(dst, src, 0, 0, size,
 			    vdev_raidz_reconst_q_pre_func, NULL);
 			(void) abd_iterate_func(dst,
-			    size, rm->rm_col[x].rc_size - size,
+			    size, rr->rr_col[x].rc_size - size,
 			    vdev_raidz_reconst_q_pre_tail_func, NULL);
 		}
 	}
 
-	src = rm->rm_col[VDEV_RAIDZ_Q].rc_abd;
-	dst = rm->rm_col[x].rc_abd;
-	exp = 255 - (rm->rm_cols - 1 - x);
+	src = rr->rr_col[VDEV_RAIDZ_Q].rc_abd;
+	dst = rr->rr_col[x].rc_abd;
+	exp = 255 - (rr->rr_cols - 1 - x);
 
 	struct reconst_q_struct rq = { abd_to_buf(src), exp };
-	(void) abd_iterate_func(dst, 0, rm->rm_col[x].rc_size,
+	(void) abd_iterate_func(dst, 0, rr->rr_col[x].rc_size,
 	    vdev_raidz_reconst_q_post_func, &rq);
 
 	return (1 << VDEV_RAIDZ_Q);
 }
 
 static int
-vdev_raidz_reconstruct_pq(raidz_map_t *rm, int *tgts, int ntgts)
+vdev_raidz_reconstruct_pq(raidz_row_t *rr, int *tgts, int ntgts)
 {
 	uint8_t *p, *q, *pxy, *qxy, tmp, a, b, aexp, bexp;
 	abd_t *pdata, *qdata;
@@ -901,10 +940,10 @@ vdev_raidz_reconstruct_pq(raidz_map_t *rm, int *tgts, int ntgts)
 
 	ASSERT(ntgts == 2);
 	ASSERT(x < y);
-	ASSERT(x >= rm->rm_firstdatacol);
-	ASSERT(y < rm->rm_cols);
+	ASSERT(x >= rr->rr_firstdatacol);
+	ASSERT(y < rr->rr_cols);
 
-	ASSERT(rm->rm_col[x].rc_size >= rm->rm_col[y].rc_size);
+	ASSERT(rr->rr_col[x].rc_size >= rr->rr_col[y].rc_size);
 
 	/*
 	 * Move the parity data aside -- we're going to compute parity as
@@ -913,29 +952,29 @@ vdev_raidz_reconstruct_pq(raidz_map_t *rm, int *tgts, int ntgts)
 	 * parity so we make those columns appear to be full of zeros by
 	 * setting their lengths to zero.
 	 */
-	pdata = rm->rm_col[VDEV_RAIDZ_P].rc_abd;
-	qdata = rm->rm_col[VDEV_RAIDZ_Q].rc_abd;
-	xsize = rm->rm_col[x].rc_size;
-	ysize = rm->rm_col[y].rc_size;
+	pdata = rr->rr_col[VDEV_RAIDZ_P].rc_abd;
+	qdata = rr->rr_col[VDEV_RAIDZ_Q].rc_abd;
+	xsize = rr->rr_col[x].rc_size;
+	ysize = rr->rr_col[y].rc_size;
 
-	rm->rm_col[VDEV_RAIDZ_P].rc_abd =
-	    abd_alloc_linear(rm->rm_col[VDEV_RAIDZ_P].rc_size, B_TRUE);
-	rm->rm_col[VDEV_RAIDZ_Q].rc_abd =
-	    abd_alloc_linear(rm->rm_col[VDEV_RAIDZ_Q].rc_size, B_TRUE);
-	rm->rm_col[x].rc_size = 0;
-	rm->rm_col[y].rc_size = 0;
+	rr->rr_col[VDEV_RAIDZ_P].rc_abd =
+	    abd_alloc_linear(rr->rr_col[VDEV_RAIDZ_P].rc_size, B_TRUE);
+	rr->rr_col[VDEV_RAIDZ_Q].rc_abd =
+	    abd_alloc_linear(rr->rr_col[VDEV_RAIDZ_Q].rc_size, B_TRUE);
+	rr->rr_col[x].rc_size = 0;
+	rr->rr_col[y].rc_size = 0;
 
-	vdev_raidz_generate_parity_pq(rm);
+	vdev_raidz_generate_parity_pq(rr);
 
-	rm->rm_col[x].rc_size = xsize;
-	rm->rm_col[y].rc_size = ysize;
+	rr->rr_col[x].rc_size = xsize;
+	rr->rr_col[y].rc_size = ysize;
 
 	p = abd_to_buf(pdata);
 	q = abd_to_buf(qdata);
-	pxy = abd_to_buf(rm->rm_col[VDEV_RAIDZ_P].rc_abd);
-	qxy = abd_to_buf(rm->rm_col[VDEV_RAIDZ_Q].rc_abd);
-	xd = rm->rm_col[x].rc_abd;
-	yd = rm->rm_col[y].rc_abd;
+	pxy = abd_to_buf(rr->rr_col[VDEV_RAIDZ_P].rc_abd);
+	qxy = abd_to_buf(rr->rr_col[VDEV_RAIDZ_Q].rc_abd);
+	xd = rr->rr_col[x].rc_abd;
+	yd = rr->rr_col[y].rc_abd;
 
 	/*
 	 * We now have:
@@ -953,7 +992,7 @@ vdev_raidz_reconstruct_pq(raidz_map_t *rm, int *tgts, int ntgts)
 	 */
 
 	a = vdev_raidz_pow2[255 + x - y];
-	b = vdev_raidz_pow2[255 - (rm->rm_cols - 1 - x)];
+	b = vdev_raidz_pow2[255 - (rr->rr_cols - 1 - x)];
 	tmp = 255 - vdev_raidz_log2[a ^ 1];
 
 	aexp = vdev_raidz_log2[vdev_raidz_exp2(a, tmp)];
@@ -967,14 +1006,14 @@ vdev_raidz_reconstruct_pq(raidz_map_t *rm, int *tgts, int ntgts)
 	(void) abd_iterate_func(xd, ysize, xsize - ysize,
 	    vdev_raidz_reconst_pq_tail_func, &rpq);
 
-	abd_free(rm->rm_col[VDEV_RAIDZ_P].rc_abd);
-	abd_free(rm->rm_col[VDEV_RAIDZ_Q].rc_abd);
+	abd_free(rr->rr_col[VDEV_RAIDZ_P].rc_abd);
+	abd_free(rr->rr_col[VDEV_RAIDZ_Q].rc_abd);
 
 	/*
 	 * Restore the saved parity data.
 	 */
-	rm->rm_col[VDEV_RAIDZ_P].rc_abd = pdata;
-	rm->rm_col[VDEV_RAIDZ_Q].rc_abd = qdata;
+	rr->rr_col[VDEV_RAIDZ_P].rc_abd = pdata;
+	rr->rr_col[VDEV_RAIDZ_Q].rc_abd = qdata;
 
 	return ((1 << VDEV_RAIDZ_P) | (1 << VDEV_RAIDZ_Q));
 }
@@ -1134,13 +1173,13 @@ vdev_raidz_reconstruct_pq(raidz_map_t *rm, int *tgts, int ntgts)
 /* END CSTYLED */
 
 static void
-vdev_raidz_matrix_init(raidz_map_t *rm, int n, int nmap, int *map,
+vdev_raidz_matrix_init(raidz_row_t *rr, int n, int nmap, int *map,
     uint8_t **rows)
 {
 	int i, j;
 	int pow;
 
-	ASSERT(n == rm->rm_cols - rm->rm_firstdatacol);
+	ASSERT(n == rr->rr_cols - rr->rr_firstdatacol);
 
 	/*
 	 * Fill in the missing rows of interest.
@@ -1164,7 +1203,7 @@ vdev_raidz_matrix_init(raidz_map_t *rm, int n, int nmap, int *map,
 }
 
 static void
-vdev_raidz_matrix_invert(raidz_map_t *rm, int n, int nmissing, int *missing,
+vdev_raidz_matrix_invert(raidz_row_t *rr, int n, int nmissing, int *missing,
     uint8_t **rows, uint8_t **invrows, const uint8_t *used)
 {
 	int i, j, ii, jj;
@@ -1176,10 +1215,10 @@ vdev_raidz_matrix_invert(raidz_map_t *rm, int n, int nmissing, int *missing,
 	 * correspond to data columns.
 	 */
 	for (i = 0; i < nmissing; i++) {
-		ASSERT3S(used[i], <, rm->rm_firstdatacol);
+		ASSERT3S(used[i], <, rr->rr_firstdatacol);
 	}
 	for (; i < n; i++) {
-		ASSERT3S(used[i], >=, rm->rm_firstdatacol);
+		ASSERT3S(used[i], >=, rr->rr_firstdatacol);
 	}
 
 	/*
@@ -1196,8 +1235,8 @@ vdev_raidz_matrix_invert(raidz_map_t *rm, int n, int nmissing, int *missing,
 	 */
 	for (i = 0; i < nmissing; i++) {
 		for (j = nmissing; j < n; j++) {
-			ASSERT3U(used[j], >=, rm->rm_firstdatacol);
-			jj = used[j] - rm->rm_firstdatacol;
+			ASSERT3U(used[j], >=, rr->rr_firstdatacol);
+			jj = used[j] - rr->rr_firstdatacol;
 			ASSERT3S(jj, <, n);
 			invrows[i][j] = rows[i][jj];
 			rows[i][jj] = 0;
@@ -1258,7 +1297,7 @@ vdev_raidz_matrix_invert(raidz_map_t *rm, int n, int nmissing, int *missing,
 }
 
 static void
-vdev_raidz_matrix_reconstruct(raidz_map_t *rm, int n, int nmissing,
+vdev_raidz_matrix_reconstruct(raidz_row_t *rr, int n, int nmissing,
     int *missing, uint8_t **invrows, const uint8_t *used)
 {
 	int i, j, x, cc, c;
@@ -1290,22 +1329,24 @@ vdev_raidz_matrix_reconstruct(raidz_map_t *rm, int n, int nmissing,
 
 	for (i = 0; i < n; i++) {
 		c = used[i];
-		ASSERT3U(c, <, rm->rm_cols);
+		ASSERT3U(c, <, rr->rr_cols);
 
-		src = abd_to_buf(rm->rm_col[c].rc_abd);
-		ccount = rm->rm_col[c].rc_size;
+		ccount = rr->rr_col[c].rc_size;
+		ASSERT(ccount >= rr->rr_col[missing[0]].rc_size || i > 0);
+		if (ccount == 0)
+			continue;
+		src = abd_to_buf(rr->rr_col[c].rc_abd);
 		for (j = 0; j < nmissing; j++) {
-			cc = missing[j] + rm->rm_firstdatacol;
-			ASSERT3U(cc, >=, rm->rm_firstdatacol);
-			ASSERT3U(cc, <, rm->rm_cols);
+			cc = missing[j] + rr->rr_firstdatacol;
+			ASSERT3U(cc, >=, rr->rr_firstdatacol);
+			ASSERT3U(cc, <, rr->rr_cols);
 			ASSERT3U(cc, !=, c);
 
-			dst[j] = abd_to_buf(rm->rm_col[cc].rc_abd);
-			dcount[j] = rm->rm_col[cc].rc_size;
+			dcount[j] = rr->rr_col[cc].rc_size;
+			if (dcount[j] != 0)
+				dst[j] = abd_to_buf(rr->rr_col[cc].rc_abd);
 		}
 
-		ASSERT(ccount >= rm->rm_col[missing[0]].rc_size || i > 0);
-
 		for (x = 0; x < ccount; x++, src++) {
 			if (*src != 0)
 				log = vdev_raidz_log2[*src];
@@ -1334,16 +1375,14 @@ vdev_raidz_matrix_reconstruct(raidz_map_t *rm, int n, int nmissing,
 }
 
 static int
-vdev_raidz_reconstruct_general(raidz_map_t *rm, int *tgts, int ntgts)
+vdev_raidz_reconstruct_general(raidz_row_t *rr, int *tgts, int ntgts)
 {
 	int n, i, c, t, tt;
 	int nmissing_rows;
 	int missing_rows[VDEV_RAIDZ_MAXPARITY];
 	int parity_map[VDEV_RAIDZ_MAXPARITY];
-
 	uint8_t *p, *pp;
 	size_t psize;
-
 	uint8_t *rows[VDEV_RAIDZ_MAXPARITY];
 	uint8_t *invrows[VDEV_RAIDZ_MAXPARITY];
 	uint8_t *used;
@@ -1354,30 +1393,39 @@ vdev_raidz_reconstruct_general(raidz_map_t *rm, int *tgts, int ntgts)
 
 	/*
 	 * Matrix reconstruction can't use scatter ABDs yet, so we allocate
-	 * temporary linear ABDs.
+	 * temporary linear ABDs if any non-linear ABDs are found.
 	 */
-	if (!abd_is_linear(rm->rm_col[rm->rm_firstdatacol].rc_abd)) {
-		bufs = kmem_alloc(rm->rm_cols * sizeof (abd_t *), KM_PUSHPAGE);
-
-		for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-			raidz_col_t *col = &rm->rm_col[c];
+	for (i = rr->rr_firstdatacol; i < rr->rr_cols; i++) {
+		if (!abd_is_linear(rr->rr_col[i].rc_abd)) {
+			bufs = kmem_alloc(rr->rr_cols * sizeof (abd_t *),
+			    KM_PUSHPAGE);
+
+			for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+				raidz_col_t *col = &rr->rr_col[c];
+
+				bufs[c] = col->rc_abd;
+				if (bufs[c] != NULL) {
+					col->rc_abd = abd_alloc_linear(
+					    col->rc_size, B_TRUE);
+					abd_copy(col->rc_abd, bufs[c],
+					    col->rc_size);
+				}
+			}
 
-			bufs[c] = col->rc_abd;
-			col->rc_abd = abd_alloc_linear(col->rc_size, B_TRUE);
-			abd_copy(col->rc_abd, bufs[c], col->rc_size);
+			break;
 		}
 	}
 
-	n = rm->rm_cols - rm->rm_firstdatacol;
+	n = rr->rr_cols - rr->rr_firstdatacol;
 
 	/*
 	 * Figure out which data columns are missing.
 	 */
 	nmissing_rows = 0;
 	for (t = 0; t < ntgts; t++) {
-		if (tgts[t] >= rm->rm_firstdatacol) {
+		if (tgts[t] >= rr->rr_firstdatacol) {
 			missing_rows[nmissing_rows++] =
-			    tgts[t] - rm->rm_firstdatacol;
+			    tgts[t] - rr->rr_firstdatacol;
 		}
 	}
 
@@ -1387,7 +1435,7 @@ vdev_raidz_reconstruct_general(raidz_map_t *rm, int *tgts, int ntgts)
 	 */
 	for (tt = 0, c = 0, i = 0; i < nmissing_rows; c++) {
 		ASSERT(tt < ntgts);
-		ASSERT(c < rm->rm_firstdatacol);
+		ASSERT(c < rr->rr_firstdatacol);
 
 		/*
 		 * Skip any targeted parity columns.
@@ -1422,9 +1470,9 @@ vdev_raidz_reconstruct_general(raidz_map_t *rm, int *tgts, int ntgts)
 		used[i] = parity_map[i];
 	}
 
-	for (tt = 0, c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
+	for (tt = 0, c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
 		if (tt < nmissing_rows &&
-		    c == missing_rows[tt] + rm->rm_firstdatacol) {
+		    c == missing_rows[tt] + rr->rr_firstdatacol) {
 			tt++;
 			continue;
 		}
@@ -1437,18 +1485,18 @@ vdev_raidz_reconstruct_general(raidz_map_t *rm, int *tgts, int ntgts)
 	/*
 	 * Initialize the interesting rows of the matrix.
 	 */
-	vdev_raidz_matrix_init(rm, n, nmissing_rows, parity_map, rows);
+	vdev_raidz_matrix_init(rr, n, nmissing_rows, parity_map, rows);
 
 	/*
 	 * Invert the matrix.
 	 */
-	vdev_raidz_matrix_invert(rm, n, nmissing_rows, missing_rows, rows,
+	vdev_raidz_matrix_invert(rr, n, nmissing_rows, missing_rows, rows,
 	    invrows, used);
 
 	/*
 	 * Reconstruct the missing data using the generated matrix.
 	 */
-	vdev_raidz_matrix_reconstruct(rm, n, nmissing_rows, missing_rows,
+	vdev_raidz_matrix_reconstruct(rr, n, nmissing_rows, missing_rows,
 	    invrows, used);
 
 	kmem_free(p, psize);
@@ -1457,21 +1505,24 @@ vdev_raidz_reconstruct_general(raidz_map_t *rm, int *tgts, int ntgts)
 	 * copy back from temporary linear abds and free them
 	 */
 	if (bufs) {
-		for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-			raidz_col_t *col = &rm->rm_col[c];
+		for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+			raidz_col_t *col = &rr->rr_col[c];
 
-			abd_copy(bufs[c], col->rc_abd, col->rc_size);
-			abd_free(col->rc_abd);
+			if (bufs[c] != NULL) {
+				abd_copy(bufs[c], col->rc_abd, col->rc_size);
+				abd_free(col->rc_abd);
+			}
 			col->rc_abd = bufs[c];
 		}
-		kmem_free(bufs, rm->rm_cols * sizeof (abd_t *));
+		kmem_free(bufs, rr->rr_cols * sizeof (abd_t *));
 	}
 
 	return (code);
 }
 
-int
-vdev_raidz_reconstruct(raidz_map_t *rm, const int *t, int nt)
+static int
+vdev_raidz_reconstruct_row(raidz_map_t *rm, raidz_row_t *rr,
+    const int *t, int nt)
 {
 	int tgts[VDEV_RAIDZ_MAXPARITY], *dt;
 	int ntgts;
@@ -1480,26 +1531,19 @@ vdev_raidz_reconstruct(raidz_map_t *rm, const int *t, int nt)
 	int nbadparity, nbaddata;
 	int parity_valid[VDEV_RAIDZ_MAXPARITY];
 
-	/*
-	 * The tgts list must already be sorted.
-	 */
-	for (i = 1; i < nt; i++) {
-		ASSERT(t[i] > t[i - 1]);
-	}
-
-	nbadparity = rm->rm_firstdatacol;
-	nbaddata = rm->rm_cols - nbadparity;
+	nbadparity = rr->rr_firstdatacol;
+	nbaddata = rr->rr_cols - nbadparity;
 	ntgts = 0;
-	for (i = 0, c = 0; c < rm->rm_cols; c++) {
-		if (c < rm->rm_firstdatacol)
+	for (i = 0, c = 0; c < rr->rr_cols; c++) {
+		if (c < rr->rr_firstdatacol)
 			parity_valid[c] = B_FALSE;
 
 		if (i < nt && c == t[i]) {
 			tgts[ntgts++] = c;
 			i++;
-		} else if (rm->rm_col[c].rc_error != 0) {
+		} else if (rr->rr_col[c].rc_error != 0) {
 			tgts[ntgts++] = c;
-		} else if (c >= rm->rm_firstdatacol) {
+		} else if (c >= rr->rr_firstdatacol) {
 			nbaddata--;
 		} else {
 			parity_valid[c] = B_TRUE;
@@ -1514,7 +1558,7 @@ vdev_raidz_reconstruct(raidz_map_t *rm, const int *t, int nt)
 	dt = &tgts[nbadparity];
 
 	/* Reconstruct using the new math implementation */
-	ret = vdev_raidz_math_reconstruct(rm, parity_valid, dt, nbaddata);
+	ret = vdev_raidz_math_reconstruct(rm, rr, parity_valid, dt, nbaddata);
 	if (ret != RAIDZ_ORIGINAL_IMPL)
 		return (ret);
 
@@ -1524,29 +1568,29 @@ vdev_raidz_reconstruct(raidz_map_t *rm, const int *t, int nt)
 	switch (nbaddata) {
 	case 1:
 		if (parity_valid[VDEV_RAIDZ_P])
-			return (vdev_raidz_reconstruct_p(rm, dt, 1));
+			return (vdev_raidz_reconstruct_p(rr, dt, 1));
 
-		ASSERT(rm->rm_firstdatacol > 1);
+		ASSERT(rr->rr_firstdatacol > 1);
 
 		if (parity_valid[VDEV_RAIDZ_Q])
-			return (vdev_raidz_reconstruct_q(rm, dt, 1));
+			return (vdev_raidz_reconstruct_q(rr, dt, 1));
 
-		ASSERT(rm->rm_firstdatacol > 2);
+		ASSERT(rr->rr_firstdatacol > 2);
 		break;
 
 	case 2:
-		ASSERT(rm->rm_firstdatacol > 1);
+		ASSERT(rr->rr_firstdatacol > 1);
 
 		if (parity_valid[VDEV_RAIDZ_P] &&
 		    parity_valid[VDEV_RAIDZ_Q])
-			return (vdev_raidz_reconstruct_pq(rm, dt, 2));
+			return (vdev_raidz_reconstruct_pq(rr, dt, 2));
 
-		ASSERT(rm->rm_firstdatacol > 2);
+		ASSERT(rr->rr_firstdatacol > 2);
 
 		break;
 	}
 
-	code = vdev_raidz_reconstruct_general(rm, tgts, ntgts);
+	code = vdev_raidz_reconstruct_general(rr, tgts, ntgts);
 	ASSERT(code < (1 << VDEV_RAIDZ_MAXPARITY));
 	ASSERT(code > 0);
 	return (code);
@@ -1556,8 +1600,8 @@ static int
 vdev_raidz_open(vdev_t *vd, uint64_t *asize, uint64_t *max_asize,
     uint64_t *logical_ashift, uint64_t *physical_ashift)
 {
-	vdev_t *cvd;
-	uint64_t nparity = vd->vdev_nparity;
+	vdev_raidz_t *vdrz = vd->vdev_tsd;
+	uint64_t nparity = vdrz->vd_nparity;
 	int c;
 	int lasterror = 0;
 	int numerrors = 0;
@@ -1573,7 +1617,7 @@ vdev_raidz_open(vdev_t *vd, uint64_t *asize, uint64_t *max_asize,
 	vdev_open_children(vd);
 
 	for (c = 0; c < vd->vdev_children; c++) {
-		cvd = vd->vdev_child[c];
+		vdev_t *cvd = vd->vdev_child[c];
 
 		if (cvd->vdev_open_error != 0) {
 			lasterror = cvd->vdev_open_error;
@@ -1602,19 +1646,20 @@ vdev_raidz_open(vdev_t *vd, uint64_t *asize, uint64_t *max_asize,
 static void
 vdev_raidz_close(vdev_t *vd)
 {
-	int c;
-
-	for (c = 0; c < vd->vdev_children; c++)
-		vdev_close(vd->vdev_child[c]);
+	for (int c = 0; c < vd->vdev_children; c++) {
+		if (vd->vdev_child[c] != NULL)
+			vdev_close(vd->vdev_child[c]);
+	}
 }
 
 static uint64_t
 vdev_raidz_asize(vdev_t *vd, uint64_t psize)
 {
+	vdev_raidz_t *vdrz = vd->vdev_tsd;
 	uint64_t asize;
 	uint64_t ashift = vd->vdev_top->vdev_ashift;
-	uint64_t cols = vd->vdev_children;
-	uint64_t nparity = vd->vdev_nparity;
+	uint64_t cols = vdrz->vd_logical_width;
+	uint64_t nparity = vdrz->vd_nparity;
 
 	asize = ((psize - 1) >> ashift) + 1;
 	asize += nparity * ((asize + cols - nparity - 1) / (cols - nparity));
@@ -1623,7 +1668,18 @@ vdev_raidz_asize(vdev_t *vd, uint64_t psize)
 	return (asize);
 }
 
-static void
+/*
+ * The allocatable space for a raidz vdev is N * sizeof(smallest child)
+ * so each child must provide at least 1/Nth of its asize.
+ */
+static uint64_t
+vdev_raidz_min_asize(vdev_t *vd)
+{
+	return ((vd->vdev_min_asize + vd->vdev_children - 1) /
+	    vd->vdev_children);
+}
+
+void
 vdev_raidz_child_done(zio_t *zio)
 {
 	raidz_col_t *rc = zio->io_private;
@@ -1634,21 +1690,21 @@ vdev_raidz_child_done(zio_t *zio)
 }
 
 static void
-vdev_raidz_io_verify(zio_t *zio, raidz_map_t *rm, int col)
+vdev_raidz_io_verify(vdev_t *vd, raidz_row_t *rr, int col)
 {
 #ifdef ZFS_DEBUG
-	vdev_t *vd = zio->io_vd;
 	vdev_t *tvd = vd->vdev_top;
 
-	range_seg64_t logical_rs, physical_rs;
-	logical_rs.rs_start = zio->io_offset;
+	range_seg64_t logical_rs, physical_rs, remain_rs;
+	logical_rs.rs_start = rr->rr_offset;
 	logical_rs.rs_end = logical_rs.rs_start +
-	    vdev_raidz_asize(zio->io_vd, zio->io_size);
+	    vdev_raidz_asize(vd, rr->rr_size);
 
-	raidz_col_t *rc = &rm->rm_col[col];
+	raidz_col_t *rc = &rr->rr_col[col];
 	vdev_t *cvd = vd->vdev_child[rc->rc_devidx];
 
-	vdev_xlate(cvd, &logical_rs, &physical_rs);
+	vdev_xlate(cvd, &logical_rs, &physical_rs, &remain_rs);
+	ASSERT(vdev_xlate_is_empty(&remain_rs));
 	ASSERT3U(rc->rc_offset, ==, physical_rs.rs_start);
 	ASSERT3U(rc->rc_offset, <, physical_rs.rs_end);
 	/*
@@ -1666,106 +1722,82 @@ vdev_raidz_io_verify(zio_t *zio, raidz_map_t *rm, int col)
 #endif
 }
 
-/*
- * Start an IO operation on a RAIDZ VDev
- *
- * Outline:
- * - For write operations:
- *   1. Generate the parity data
- *   2. Create child zio write operations to each column's vdev, for both
- *      data and parity.
- *   3. If the column skips any sectors for padding, create optional dummy
- *      write zio children for those areas to improve aggregation continuity.
- * - For read operations:
- *   1. Create child zio read operations to each data column's vdev to read
- *      the range of data required for zio.
- *   2. If this is a scrub or resilver operation, or if any of the data
- *      vdevs have had errors, then create zio read operations to the parity
- *      columns' VDevs as well.
- */
 static void
-vdev_raidz_io_start(zio_t *zio)
+vdev_raidz_io_start_write(zio_t *zio, raidz_row_t *rr, uint64_t ashift)
 {
 	vdev_t *vd = zio->io_vd;
-	vdev_t *tvd = vd->vdev_top;
-	vdev_t *cvd;
-	raidz_map_t *rm;
-	raidz_col_t *rc;
+	raidz_map_t *rm = zio->io_vsd;
 	int c, i;
 
-	rm = vdev_raidz_map_alloc(zio, tvd->vdev_ashift, vd->vdev_children,
-	    vd->vdev_nparity);
-
-	ASSERT3U(rm->rm_asize, ==, vdev_psize_to_asize(vd, zio->io_size));
+	vdev_raidz_generate_parity_row(rm, rr);
 
-	if (zio->io_type == ZIO_TYPE_WRITE) {
-		vdev_raidz_generate_parity(rm);
-
-		for (c = 0; c < rm->rm_cols; c++) {
-			rc = &rm->rm_col[c];
-			cvd = vd->vdev_child[rc->rc_devidx];
-
-			/*
-			 * Verify physical to logical translation.
-			 */
-			vdev_raidz_io_verify(zio, rm, c);
+	for (int c = 0; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+		if (rc->rc_size == 0)
+			continue;
 
-			zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
-			    rc->rc_offset, rc->rc_abd, rc->rc_size,
-			    zio->io_type, zio->io_priority, 0,
-			    vdev_raidz_child_done, rc));
-		}
+		/* Verify physical to logical translation */
+		vdev_raidz_io_verify(vd, rr, c);
 
-		/*
-		 * Generate optional I/Os for any skipped sectors to improve
-		 * aggregation contiguity.
-		 */
-		for (c = rm->rm_skipstart, i = 0; i < rm->rm_nskip; c++, i++) {
-			ASSERT(c <= rm->rm_scols);
-			if (c == rm->rm_scols)
-				c = 0;
-			rc = &rm->rm_col[c];
-			cvd = vd->vdev_child[rc->rc_devidx];
-			zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
-			    rc->rc_offset + rc->rc_size, NULL,
-			    1 << tvd->vdev_ashift,
-			    zio->io_type, zio->io_priority,
-			    ZIO_FLAG_NODATA | ZIO_FLAG_OPTIONAL, NULL, NULL));
-		}
+		zio_nowait(zio_vdev_child_io(zio, NULL,
+		    vd->vdev_child[rc->rc_devidx], rc->rc_offset,
+		    rc->rc_abd, rc->rc_size, zio->io_type, zio->io_priority,
+		    0, vdev_raidz_child_done, rc));
+	}
 
-		zio_execute(zio);
-		return;
+	/*
+	 * Generate optional I/Os for skip sectors to improve aggregation
+	 * contiguity.
+	 */
+	for (c = rm->rm_skipstart, i = 0; i < rm->rm_nskip; c++, i++) {
+		ASSERT(c <= rr->rr_scols);
+		if (c == rr->rr_scols)
+			c = 0;
+
+		raidz_col_t *rc = &rr->rr_col[c];
+		vdev_t *cvd = vd->vdev_child[rc->rc_devidx];
+
+		zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
+		    rc->rc_offset + rc->rc_size, NULL, 1ULL << ashift,
+		    zio->io_type, zio->io_priority,
+		    ZIO_FLAG_NODATA | ZIO_FLAG_OPTIONAL, NULL, NULL));
 	}
+}
 
-	ASSERT(zio->io_type == ZIO_TYPE_READ);
+static void
+vdev_raidz_io_start_read(zio_t *zio, raidz_row_t *rr)
+{
+	vdev_t *vd = zio->io_vd;
 
 	/*
 	 * Iterate over the columns in reverse order so that we hit the parity
 	 * last -- any errors along the way will force us to read the parity.
 	 */
-	for (c = rm->rm_cols - 1; c >= 0; c--) {
-		rc = &rm->rm_col[c];
-		cvd = vd->vdev_child[rc->rc_devidx];
+	for (int c = rr->rr_cols - 1; c >= 0; c--) {
+		raidz_col_t *rc = &rr->rr_col[c];
+		if (rc->rc_size == 0)
+			continue;
+		vdev_t *cvd = vd->vdev_child[rc->rc_devidx];
 		if (!vdev_readable(cvd)) {
-			if (c >= rm->rm_firstdatacol)
-				rm->rm_missingdata++;
+			if (c >= rr->rr_firstdatacol)
+				rr->rr_missingdata++;
 			else
-				rm->rm_missingparity++;
+				rr->rr_missingparity++;
 			rc->rc_error = SET_ERROR(ENXIO);
 			rc->rc_tried = 1;	/* don't even try */
 			rc->rc_skipped = 1;
 			continue;
 		}
 		if (vdev_dtl_contains(cvd, DTL_MISSING, zio->io_txg, 1)) {
-			if (c >= rm->rm_firstdatacol)
-				rm->rm_missingdata++;
+			if (c >= rr->rr_firstdatacol)
+				rr->rr_missingdata++;
 			else
-				rm->rm_missingparity++;
+				rr->rr_missingparity++;
 			rc->rc_error = SET_ERROR(ESTALE);
 			rc->rc_skipped = 1;
 			continue;
 		}
-		if (c >= rm->rm_firstdatacol || rm->rm_missingdata > 0 ||
+		if (c >= rr->rr_firstdatacol || rr->rr_missingdata > 0 ||
 		    (zio->io_flags & (ZIO_FLAG_SCRUB | ZIO_FLAG_RESILVER))) {
 			zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
 			    rc->rc_offset, rc->rc_abd, rc->rc_size,
@@ -1773,11 +1805,56 @@ vdev_raidz_io_start(zio_t *zio)
 			    vdev_raidz_child_done, rc));
 		}
 	}
+}
+
+/*
+ * Start an IO operation on a RAIDZ VDev
+ *
+ * Outline:
+ * - For write operations:
+ *   1. Generate the parity data
+ *   2. Create child zio write operations to each column's vdev, for both
+ *      data and parity.
+ *   3. If the column skips any sectors for padding, create optional dummy
+ *      write zio children for those areas to improve aggregation continuity.
+ * - For read operations:
+ *   1. Create child zio read operations to each data column's vdev to read
+ *      the range of data required for zio.
+ *   2. If this is a scrub or resilver operation, or if any of the data
+ *      vdevs have had errors, then create zio read operations to the parity
+ *      columns' VDevs as well.
+ */
+static void
+vdev_raidz_io_start(zio_t *zio)
+{
+	vdev_t *vd = zio->io_vd;
+	vdev_t *tvd = vd->vdev_top;
+	vdev_raidz_t *vdrz = vd->vdev_tsd;
+	raidz_map_t *rm;
+
+	rm = vdev_raidz_map_alloc(zio, tvd->vdev_ashift,
+	    vdrz->vd_logical_width, vdrz->vd_nparity);
+
+	/*
+	 * Until raidz expansion is implemented all maps for a raidz vdev
+	 * contain a single row.
+	 */
+	ASSERT3U(rm->rm_nrows, ==, 1);
+	raidz_row_t *rr = rm->rm_row[0];
+
+	zio->io_vsd = rm;
+	zio->io_vsd_ops = &vdev_raidz_vsd_ops;
+
+	if (zio->io_type == ZIO_TYPE_WRITE) {
+		vdev_raidz_io_start_write(zio, rr, tvd->vdev_ashift);
+	} else {
+		ASSERT(zio->io_type == ZIO_TYPE_READ);
+		vdev_raidz_io_start_read(zio, rr);
+	}
 
 	zio_execute(zio);
 }
 
-
 /*
  * Report a checksum error for a child of a RAID-Z device.
  */
@@ -1786,7 +1863,8 @@ raidz_checksum_error(zio_t *zio, raidz_col_t *rc, abd_t *bad_data)
 {
 	vdev_t *vd = zio->io_vd->vdev_child[rc->rc_devidx];
 
-	if (!(zio->io_flags & ZIO_FLAG_SPECULATIVE)) {
+	if (!(zio->io_flags & ZIO_FLAG_SPECULATIVE) &&
+	    zio->io_priority != ZIO_PRIORITY_REBUILD) {
 		zio_bad_cksum_t zbc;
 		raidz_map_t *rm = zio->io_vsd;
 
@@ -1827,13 +1905,14 @@ raidz_checksum_verify(zio_t *zio)
  * Generate the parity from the data columns. If we tried and were able to
  * read the parity without error, verify that the generated parity matches the
  * data we read. If it doesn't, we fire off a checksum error. Return the
- * number such failures.
+ * number of such failures.
  */
 static int
-raidz_parity_verify(zio_t *zio, raidz_map_t *rm)
+raidz_parity_verify(zio_t *zio, raidz_row_t *rr)
 {
 	abd_t *orig[VDEV_RAIDZ_MAXPARITY];
 	int c, ret = 0;
+	raidz_map_t *rm = zio->io_vsd;
 	raidz_col_t *rc;
 
 	blkptr_t *bp = zio->io_bp;
@@ -1843,8 +1922,18 @@ raidz_parity_verify(zio_t *zio, raidz_map_t *rm)
 	if (checksum == ZIO_CHECKSUM_NOPARITY)
 		return (ret);
 
-	for (c = 0; c < rm->rm_firstdatacol; c++) {
-		rc = &rm->rm_col[c];
+	/*
+	 * All data columns must have been successfully read in order
+	 * to use them to generate parity columns for comparison.
+	 */
+	for (c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+		rc = &rr->rr_col[c];
+		if (!rc->rc_tried || rc->rc_error != 0)
+			return (ret);
+	}
+
+	for (c = 0; c < rr->rr_firstdatacol; c++) {
+		rc = &rr->rr_col[c];
 		if (!rc->rc_tried || rc->rc_error != 0)
 			continue;
 
@@ -1852,12 +1941,19 @@ raidz_parity_verify(zio_t *zio, raidz_map_t *rm)
 		abd_copy(orig[c], rc->rc_abd, rc->rc_size);
 	}
 
-	vdev_raidz_generate_parity(rm);
+	/*
+	 * Regenerates parity even for !tried||rc_error!=0 columns.  This
+	 * isn't harmful but it does have the side effect of fixing stuff
+	 * we didn't realize was necessary (i.e. even if we return 0).
+	 */
+	vdev_raidz_generate_parity_row(rm, rr);
+
+	for (c = 0; c < rr->rr_firstdatacol; c++) {
+		rc = &rr->rr_col[c];
 
-	for (c = 0; c < rm->rm_firstdatacol; c++) {
-		rc = &rm->rm_col[c];
 		if (!rc->rc_tried || rc->rc_error != 0)
 			continue;
+
 		if (abd_cmp(orig[c], rc->rc_abd) != 0) {
 			raidz_checksum_error(zio, rc, orig[c]);
 			rc->rc_error = SET_ERROR(ECKSUM);
@@ -1870,456 +1966,597 @@ raidz_parity_verify(zio_t *zio, raidz_map_t *rm)
 }
 
 static int
-vdev_raidz_worst_error(raidz_map_t *rm)
+vdev_raidz_worst_error(raidz_row_t *rr)
 {
 	int error = 0;
 
-	for (int c = 0; c < rm->rm_cols; c++)
-		error = zio_worst_error(error, rm->rm_col[c].rc_error);
+	for (int c = 0; c < rr->rr_cols; c++)
+		error = zio_worst_error(error, rr->rr_col[c].rc_error);
 
 	return (error);
 }
 
-/*
- * Iterate over all combinations of bad data and attempt a reconstruction.
- * Note that the algorithm below is non-optimal because it doesn't take into
- * account how reconstruction is actually performed. For example, with
- * triple-parity RAID-Z the reconstruction procedure is the same if column 4
- * is targeted as invalid as if columns 1 and 4 are targeted since in both
- * cases we'd only use parity information in column 0.
- */
-static int
-vdev_raidz_combrec(zio_t *zio, int total_errors, int data_errors)
+static void
+vdev_raidz_io_done_verified(zio_t *zio, raidz_row_t *rr)
 {
-	raidz_map_t *rm = zio->io_vsd;
-	raidz_col_t *rc;
-	abd_t *orig[VDEV_RAIDZ_MAXPARITY];
-	int tstore[VDEV_RAIDZ_MAXPARITY + 2];
-	int *tgts = &tstore[1];
-	int curr, next, i, c, n;
-	int code, ret = 0;
+	int unexpected_errors = 0;
+	int parity_errors = 0;
+	int parity_untried = 0;
+	int data_errors = 0;
 
-	ASSERT(total_errors < rm->rm_firstdatacol);
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
+
+	for (int c = 0; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		if (rc->rc_error) {
+			if (c < rr->rr_firstdatacol)
+				parity_errors++;
+			else
+				data_errors++;
+
+			if (!rc->rc_skipped)
+				unexpected_errors++;
+		} else if (c < rr->rr_firstdatacol && !rc->rc_tried) {
+			parity_untried++;
+		}
+	}
 
 	/*
-	 * This simplifies one edge condition.
+	 * If we read more parity disks than were used for
+	 * reconstruction, confirm that the other parity disks produced
+	 * correct data.
+	 *
+	 * Note that we also regenerate parity when resilvering so we
+	 * can write it out to failed devices later.
 	 */
-	tgts[-1] = -1;
+	if (parity_errors + parity_untried <
+	    rr->rr_firstdatacol - data_errors ||
+	    (zio->io_flags & ZIO_FLAG_RESILVER)) {
+		int n = raidz_parity_verify(zio, rr);
+		unexpected_errors += n;
+		ASSERT3U(parity_errors + n, <=, rr->rr_firstdatacol);
+	}
 
-	for (n = 1; n <= rm->rm_firstdatacol - total_errors; n++) {
+	if (zio->io_error == 0 && spa_writeable(zio->io_spa) &&
+	    (unexpected_errors > 0 || (zio->io_flags & ZIO_FLAG_RESILVER))) {
 		/*
-		 * Initialize the targets array by finding the first n columns
-		 * that contain no error.
-		 *
-		 * If there were no data errors, we need to ensure that we're
-		 * always explicitly attempting to reconstruct at least one
-		 * data column. To do this, we simply push the highest target
-		 * up into the data columns.
+		 * Use the good data we have in hand to repair damaged children.
 		 */
-		for (c = 0, i = 0; i < n; i++) {
-			if (i == n - 1 && data_errors == 0 &&
-			    c < rm->rm_firstdatacol) {
-				c = rm->rm_firstdatacol;
+		for (int c = 0; c < rr->rr_cols; c++) {
+			raidz_col_t *rc = &rr->rr_col[c];
+			vdev_t *vd = zio->io_vd;
+			vdev_t *cvd = vd->vdev_child[rc->rc_devidx];
+
+			if ((rc->rc_error == 0 || rc->rc_size == 0) &&
+			    (rc->rc_repair == 0)) {
+				continue;
 			}
 
-			while (rm->rm_col[c].rc_error != 0) {
-				c++;
-				ASSERT3S(c, <, rm->rm_cols);
+			zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
+			    rc->rc_offset, rc->rc_abd, rc->rc_size,
+			    ZIO_TYPE_WRITE,
+			    zio->io_priority == ZIO_PRIORITY_REBUILD ?
+			    ZIO_PRIORITY_REBUILD : ZIO_PRIORITY_ASYNC_WRITE,
+			    ZIO_FLAG_IO_REPAIR | (unexpected_errors ?
+			    ZIO_FLAG_SELF_HEAL : 0), NULL, NULL));
+		}
+	}
+}
+
+static void
+raidz_restore_orig_data(raidz_map_t *rm)
+{
+	for (int i = 0; i < rm->rm_nrows; i++) {
+		raidz_row_t *rr = rm->rm_row[i];
+		for (int c = 0; c < rr->rr_cols; c++) {
+			raidz_col_t *rc = &rr->rr_col[c];
+			if (rc->rc_need_orig_restore) {
+				abd_copy_from_buf(rc->rc_abd,
+				    rc->rc_orig_data, rc->rc_size);
+				rc->rc_need_orig_restore = B_FALSE;
 			}
+		}
+	}
+}
+
+/*
+ * returns EINVAL if reconstruction of the block will not be possible
+ * returns ECKSUM if this specific reconstruction failed
+ * returns 0 on successful reconstruction
+ */
+static int
+raidz_reconstruct(zio_t *zio, int *ltgts, int ntgts, int nparity)
+{
+	raidz_map_t *rm = zio->io_vsd;
 
-			tgts[i] = c++;
+	/* Reconstruct each row */
+	for (int r = 0; r < rm->rm_nrows; r++) {
+		raidz_row_t *rr = rm->rm_row[r];
+		int my_tgts[VDEV_RAIDZ_MAXPARITY]; /* value is child id */
+		int t = 0;
+		int dead = 0;
+		int dead_data = 0;
+
+		for (int c = 0; c < rr->rr_cols; c++) {
+			raidz_col_t *rc = &rr->rr_col[c];
+			ASSERT0(rc->rc_need_orig_restore);
+			if (rc->rc_error != 0) {
+				dead++;
+				if (c >= nparity)
+					dead_data++;
+				continue;
+			}
+			if (rc->rc_size == 0)
+				continue;
+			for (int lt = 0; lt < ntgts; lt++) {
+				if (rc->rc_devidx == ltgts[lt]) {
+					if (rc->rc_orig_data == NULL) {
+						rc->rc_orig_data =
+						    zio_buf_alloc(rc->rc_size);
+						abd_copy_to_buf(
+						    rc->rc_orig_data,
+						    rc->rc_abd, rc->rc_size);
+					}
+					rc->rc_need_orig_restore = B_TRUE;
+
+					dead++;
+					if (c >= nparity)
+						dead_data++;
+					my_tgts[t++] = c;
+					break;
+				}
+			}
+		}
+		if (dead > nparity) {
+			/* reconstruction not possible */
+			raidz_restore_orig_data(rm);
+			return (EINVAL);
 		}
+		rr->rr_code = 0;
+		if (dead_data > 0)
+			rr->rr_code = vdev_raidz_reconstruct_row(rm, rr,
+			    my_tgts, t);
+	}
 
-		/*
-		 * Setting tgts[n] simplifies the other edge condition.
-		 */
-		tgts[n] = rm->rm_cols;
+	/* Check for success */
+	if (raidz_checksum_verify(zio) == 0) {
+
+		/* Reconstruction succeeded - report errors */
+		for (int i = 0; i < rm->rm_nrows; i++) {
+			raidz_row_t *rr = rm->rm_row[i];
+
+			for (int c = 0; c < rr->rr_cols; c++) {
+				raidz_col_t *rc = &rr->rr_col[c];
+				if (rc->rc_need_orig_restore) {
+					/*
+					 * Note: if this is a parity column,
+					 * we don't really know if it's wrong.
+					 * We need to let
+					 * vdev_raidz_io_done_verified() check
+					 * it, and if we set rc_error, it will
+					 * think that it is a "known" error
+					 * that doesn't need to be checked
+					 * or corrected.
+					 */
+					if (rc->rc_error == 0 &&
+					    c >= rr->rr_firstdatacol) {
+						raidz_checksum_error(zio,
+						    rc, rc->rc_gdata);
+						rc->rc_error =
+						    SET_ERROR(ECKSUM);
+					}
+					rc->rc_need_orig_restore = B_FALSE;
+				}
+			}
 
-		/*
-		 * These buffers were allocated in previous iterations.
-		 */
-		for (i = 0; i < n - 1; i++) {
-			ASSERT(orig[i] != NULL);
+			vdev_raidz_io_done_verified(zio, rr);
 		}
 
-		orig[n - 1] = abd_alloc_sametype(rm->rm_col[0].rc_abd,
-		    rm->rm_col[0].rc_size);
+		zio_checksum_verified(zio);
 
-		curr = 0;
-		next = tgts[curr];
+		return (0);
+	}
 
-		while (curr != n) {
-			tgts[curr] = next;
-			curr = 0;
+	/* Reconstruction failed - restore original data */
+	raidz_restore_orig_data(rm);
+	return (ECKSUM);
+}
 
-			/*
-			 * Save off the original data that we're going to
-			 * attempt to reconstruct.
-			 */
-			for (i = 0; i < n; i++) {
-				ASSERT(orig[i] != NULL);
-				c = tgts[i];
-				ASSERT3S(c, >=, 0);
-				ASSERT3S(c, <, rm->rm_cols);
-				rc = &rm->rm_col[c];
-				abd_copy(orig[i], rc->rc_abd, rc->rc_size);
-			}
+/*
+ * Iterate over all combinations of N bad vdevs and attempt a reconstruction.
+ * Note that the algorithm below is non-optimal because it doesn't take into
+ * account how reconstruction is actually performed. For example, with
+ * triple-parity RAID-Z the reconstruction procedure is the same if column 4
+ * is targeted as invalid as if columns 1 and 4 are targeted since in both
+ * cases we'd only use parity information in column 0.
+ *
+ * The order that we find the various possible combinations of failed
+ * disks is dictated by these rules:
+ * - Examine each "slot" (the "i" in tgts[i])
+ *   - Try to increment this slot (tgts[i] = tgts[i] + 1)
+ *   - if we can't increment because it runs into the next slot,
+ *     reset our slot to the minimum, and examine the next slot
+ *
+ *  For example, with a 6-wide RAIDZ3, and no known errors (so we have to choose
+ *  3 columns to reconstruct), we will generate the following sequence:
+ *
+ *  STATE        ACTION
+ *  0 1 2        special case: skip since these are all parity
+ *  0 1   3      first slot: reset to 0; middle slot: increment to 2
+ *  0   2 3      first slot: increment to 1
+ *    1 2 3      first: reset to 0; middle: reset to 1; last: increment to 4
+ *  0 1     4    first: reset to 0; middle: increment to 2
+ *  0   2   4    first: increment to 1
+ *    1 2   4    first: reset to 0; middle: increment to 3
+ *  0     3 4    first: increment to 1
+ *    1   3 4    first: increment to 2
+ *      2 3 4    first: reset to 0; middle: reset to 1; last: increment to 5
+ *  0 1       5  first: reset to 0; middle: increment to 2
+ *  0   2     5  first: increment to 1
+ *    1 2     5  first: reset to 0; middle: increment to 3
+ *  0     3   5  first: increment to 1
+ *    1   3   5  first: increment to 2
+ *      2 3   5  first: reset to 0; middle: increment to 4
+ *  0       4 5  first: increment to 1
+ *    1     4 5  first: increment to 2
+ *      2   4 5  first: increment to 3
+ *        3 4 5  done
+ *
+ * This strategy works for dRAID but is less effecient when there are a large
+ * number of child vdevs and therefore permutations to check. Furthermore,
+ * since the raidz_map_t rows likely do not overlap reconstruction would be
+ * possible as long as there are no more than nparity data errors per row.
+ * These additional permutations are not currently checked but could be as
+ * a future improvement.
+ */
+static int
+vdev_raidz_combrec(zio_t *zio)
+{
+	int nparity = vdev_get_nparity(zio->io_vd);
+	raidz_map_t *rm = zio->io_vsd;
 
-			/*
-			 * Attempt a reconstruction and exit the outer loop on
-			 * success.
-			 */
-			code = vdev_raidz_reconstruct(rm, tgts, n);
-			if (raidz_checksum_verify(zio) == 0) {
-
-				for (i = 0; i < n; i++) {
-					c = tgts[i];
-					rc = &rm->rm_col[c];
-					ASSERT(rc->rc_error == 0);
-					if (rc->rc_tried)
-						raidz_checksum_error(zio, rc,
-						    orig[i]);
-					rc->rc_error = SET_ERROR(ECKSUM);
-				}
+	/* Check if there's enough data to attempt reconstrution. */
+	for (int i = 0; i < rm->rm_nrows; i++) {
+		raidz_row_t *rr = rm->rm_row[i];
+		int total_errors = 0;
 
-				ret = code;
-				goto done;
-			}
+		for (int c = 0; c < rr->rr_cols; c++) {
+			if (rr->rr_col[c].rc_error)
+				total_errors++;
+		}
 
-			/*
-			 * Restore the original data.
-			 */
-			for (i = 0; i < n; i++) {
-				c = tgts[i];
-				rc = &rm->rm_col[c];
-				abd_copy(rc->rc_abd, orig[i], rc->rc_size);
-			}
+		if (total_errors > nparity)
+			return (vdev_raidz_worst_error(rr));
+	}
 
-			do {
+	for (int num_failures = 1; num_failures <= nparity; num_failures++) {
+		int tstore[VDEV_RAIDZ_MAXPARITY + 2];
+		int *ltgts = &tstore[1]; /* value is logical child ID */
+
+		/* Determine number of logical children, n */
+		int n = zio->io_vd->vdev_children;
+
+		ASSERT3U(num_failures, <=, nparity);
+		ASSERT3U(num_failures, <=, VDEV_RAIDZ_MAXPARITY);
+
+		/* Handle corner cases in combrec logic */
+		ltgts[-1] = -1;
+		for (int i = 0; i < num_failures; i++) {
+			ltgts[i] = i;
+		}
+		ltgts[num_failures] = n;
+
+		for (;;) {
+			int err = raidz_reconstruct(zio, ltgts, num_failures,
+			    nparity);
+			if (err == EINVAL) {
 				/*
-				 * Find the next valid column after the curr
-				 * position..
+				 * Reconstruction not possible with this #
+				 * failures; try more failures.
 				 */
-				for (next = tgts[curr] + 1;
-				    next < rm->rm_cols &&
-				    rm->rm_col[next].rc_error != 0; next++)
-					continue;
+				break;
+			} else if (err == 0)
+				return (0);
+
+			/* Compute next targets to try */
+			for (int t = 0; ; t++) {
+				ASSERT3U(t, <, num_failures);
+				ltgts[t]++;
+				if (ltgts[t] == n) {
+					/* try more failures */
+					ASSERT3U(t, ==, num_failures - 1);
+					break;
+				}
 
-				ASSERT(next <= tgts[curr + 1]);
+				ASSERT3U(ltgts[t], <, n);
+				ASSERT3U(ltgts[t], <=, ltgts[t + 1]);
 
 				/*
 				 * If that spot is available, we're done here.
+				 * Try the next combination.
 				 */
-				if (next != tgts[curr + 1])
+				if (ltgts[t] != ltgts[t + 1])
 					break;
 
 				/*
-				 * Otherwise, find the next valid column after
-				 * the previous position.
+				 * Otherwise, reset this tgt to the minimum,
+				 * and move on to the next tgt.
 				 */
-				for (c = tgts[curr - 1] + 1;
-				    rm->rm_col[c].rc_error != 0; c++)
-					continue;
-
-				tgts[curr] = c;
-				curr++;
+				ltgts[t] = ltgts[t - 1] + 1;
+				ASSERT3U(ltgts[t], ==, t);
+			}
 
-			} while (curr != n);
+			/* Increase the number of failures and keep trying. */
+			if (ltgts[num_failures - 1] == n)
+				break;
 		}
 	}
-	n--;
-done:
-	for (i = 0; i < n; i++)
-		abd_free(orig[i]);
 
-	return (ret);
+	return (ECKSUM);
+}
+
+void
+vdev_raidz_reconstruct(raidz_map_t *rm, const int *t, int nt)
+{
+	for (uint64_t row = 0; row < rm->rm_nrows; row++) {
+		raidz_row_t *rr = rm->rm_row[row];
+		vdev_raidz_reconstruct_row(rm, rr, t, nt);
+	}
 }
 
 /*
- * Complete an IO operation on a RAIDZ VDev
+ * Complete a write IO operation on a RAIDZ VDev
  *
  * Outline:
- * - For write operations:
  *   1. Check for errors on the child IOs.
  *   2. Return, setting an error code if too few child VDevs were written
  *      to reconstruct the data later.  Note that partial writes are
  *      considered successful if they can be reconstructed at all.
- * - For read operations:
- *   1. Check for errors on the child IOs.
- *   2. If data errors occurred:
- *      a. Try to reassemble the data from the parity available.
- *      b. If we haven't yet read the parity drives, read them now.
- *      c. If all parity drives have been read but the data still doesn't
- *         reassemble with a correct checksum, then try combinatorial
- *         reconstruction.
- *      d. If that doesn't work, return an error.
- *   3. If there were unexpected errors or this is a resilver operation,
- *      rewrite the vdevs that had errors.
  */
 static void
-vdev_raidz_io_done(zio_t *zio)
+vdev_raidz_io_done_write_impl(zio_t *zio, raidz_row_t *rr)
+{
+	int total_errors = 0;
+
+	ASSERT3U(rr->rr_missingparity, <=, rr->rr_firstdatacol);
+	ASSERT3U(rr->rr_missingdata, <=, rr->rr_cols - rr->rr_firstdatacol);
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE);
+
+	for (int c = 0; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		if (rc->rc_error) {
+			ASSERT(rc->rc_error != ECKSUM);	/* child has no bp */
+
+			total_errors++;
+		}
+	}
+
+	/*
+	 * Treat partial writes as a success. If we couldn't write enough
+	 * columns to reconstruct the data, the I/O failed.  Otherwise,
+	 * good enough.
+	 *
+	 * Now that we support write reallocation, it would be better
+	 * to treat partial failure as real failure unless there are
+	 * no non-degraded top-level vdevs left, and not update DTLs
+	 * if we intend to reallocate.
+	 */
+	if (total_errors > rr->rr_firstdatacol) {
+		zio->io_error = zio_worst_error(zio->io_error,
+		    vdev_raidz_worst_error(rr));
+	}
+}
+
+/*
+ * return 0 if no reconstruction occurred, otherwise the "code" from
+ * vdev_raidz_reconstruct().
+ */
+static int
+vdev_raidz_io_done_reconstruct_known_missing(zio_t *zio, raidz_map_t *rm,
+    raidz_row_t *rr)
 {
-	vdev_t *vd = zio->io_vd;
-	vdev_t *cvd;
-	raidz_map_t *rm = zio->io_vsd;
-	raidz_col_t *rc = NULL;
-	int unexpected_errors = 0;
 	int parity_errors = 0;
 	int parity_untried = 0;
 	int data_errors = 0;
 	int total_errors = 0;
-	int n, c;
-	int tgts[VDEV_RAIDZ_MAXPARITY];
-	int code;
-
-	ASSERT(zio->io_bp != NULL);  /* XXX need to add code to enforce this */
+	int code = 0;
 
-	ASSERT(rm->rm_missingparity <= rm->rm_firstdatacol);
-	ASSERT(rm->rm_missingdata <= rm->rm_cols - rm->rm_firstdatacol);
+	ASSERT3U(rr->rr_missingparity, <=, rr->rr_firstdatacol);
+	ASSERT3U(rr->rr_missingdata, <=, rr->rr_cols - rr->rr_firstdatacol);
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
 
-	for (c = 0; c < rm->rm_cols; c++) {
-		rc = &rm->rm_col[c];
+	for (int c = 0; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
 
 		if (rc->rc_error) {
 			ASSERT(rc->rc_error != ECKSUM);	/* child has no bp */
 
-			if (c < rm->rm_firstdatacol)
+			if (c < rr->rr_firstdatacol)
 				parity_errors++;
 			else
 				data_errors++;
 
-			if (!rc->rc_skipped)
-				unexpected_errors++;
-
 			total_errors++;
-		} else if (c < rm->rm_firstdatacol && !rc->rc_tried) {
+		} else if (c < rr->rr_firstdatacol && !rc->rc_tried) {
 			parity_untried++;
 		}
 	}
 
-	if (zio->io_type == ZIO_TYPE_WRITE) {
-		/*
-		 * XXX -- for now, treat partial writes as a success.
-		 * (If we couldn't write enough columns to reconstruct
-		 * the data, the I/O failed.  Otherwise, good enough.)
-		 *
-		 * Now that we support write reallocation, it would be better
-		 * to treat partial failure as real failure unless there are
-		 * no non-degraded top-level vdevs left, and not update DTLs
-		 * if we intend to reallocate.
-		 */
-		/* XXPOLICY */
-		if (total_errors > rm->rm_firstdatacol)
-			zio->io_error = vdev_raidz_worst_error(rm);
-
-		return;
-	}
-
-	ASSERT(zio->io_type == ZIO_TYPE_READ);
 	/*
-	 * There are three potential phases for a read:
-	 *	1. produce valid data from the columns read
-	 *	2. read all disks and try again
-	 *	3. perform combinatorial reconstruction
-	 *
-	 * Each phase is progressively both more expensive and less likely to
-	 * occur. If we encounter more errors than we can repair or all phases
-	 * fail, we have no choice but to return an error.
+	 * If there were data errors and the number of errors we saw was
+	 * correctable -- less than or equal to the number of parity disks read
+	 * -- reconstruct based on the missing data.
 	 */
+	if (data_errors != 0 &&
+	    total_errors <= rr->rr_firstdatacol - parity_untried) {
+		/*
+		 * We either attempt to read all the parity columns or
+		 * none of them. If we didn't try to read parity, we
+		 * wouldn't be here in the correctable case. There must
+		 * also have been fewer parity errors than parity
+		 * columns or, again, we wouldn't be in this code path.
+		 */
+		ASSERT(parity_untried == 0);
+		ASSERT(parity_errors < rr->rr_firstdatacol);
 
-	/*
-	 * If the number of errors we saw was correctable -- less than or equal
-	 * to the number of parity disks read -- attempt to produce data that
-	 * has a valid checksum. Naturally, this case applies in the absence of
-	 * any errors.
-	 */
-	if (total_errors <= rm->rm_firstdatacol - parity_untried) {
-		if (data_errors == 0) {
-			if (raidz_checksum_verify(zio) == 0) {
-				/*
-				 * If we read parity information (unnecessarily
-				 * as it happens since no reconstruction was
-				 * needed) regenerate and verify the parity.
-				 * We also regenerate parity when resilvering
-				 * so we can write it out to the failed device
-				 * later.
-				 */
-				if (parity_errors + parity_untried <
-				    rm->rm_firstdatacol ||
-				    (zio->io_flags & ZIO_FLAG_RESILVER)) {
-					n = raidz_parity_verify(zio, rm);
-					unexpected_errors += n;
-					ASSERT(parity_errors + n <=
-					    rm->rm_firstdatacol);
-				}
-				goto done;
+		/*
+		 * Identify the data columns that reported an error.
+		 */
+		int n = 0;
+		int tgts[VDEV_RAIDZ_MAXPARITY];
+		for (int c = rr->rr_firstdatacol; c < rr->rr_cols; c++) {
+			raidz_col_t *rc = &rr->rr_col[c];
+			if (rc->rc_error != 0) {
+				ASSERT(n < VDEV_RAIDZ_MAXPARITY);
+				tgts[n++] = c;
 			}
-		} else {
-			/*
-			 * We either attempt to read all the parity columns or
-			 * none of them. If we didn't try to read parity, we
-			 * wouldn't be here in the correctable case. There must
-			 * also have been fewer parity errors than parity
-			 * columns or, again, we wouldn't be in this code path.
-			 */
-			ASSERT(parity_untried == 0);
-			ASSERT(parity_errors < rm->rm_firstdatacol);
+		}
 
-			/*
-			 * Identify the data columns that reported an error.
-			 */
-			n = 0;
-			for (c = rm->rm_firstdatacol; c < rm->rm_cols; c++) {
-				rc = &rm->rm_col[c];
-				if (rc->rc_error != 0) {
-					ASSERT(n < VDEV_RAIDZ_MAXPARITY);
-					tgts[n++] = c;
-				}
-			}
+		ASSERT(rr->rr_firstdatacol >= n);
 
-			ASSERT(rm->rm_firstdatacol >= n);
+		code = vdev_raidz_reconstruct_row(rm, rr, tgts, n);
+	}
 
-			code = vdev_raidz_reconstruct(rm, tgts, n);
+	return (code);
+}
 
-			if (raidz_checksum_verify(zio) == 0) {
-				/*
-				 * If we read more parity disks than were used
-				 * for reconstruction, confirm that the other
-				 * parity disks produced correct data. This
-				 * routine is suboptimal in that it regenerates
-				 * the parity that we already used in addition
-				 * to the parity that we're attempting to
-				 * verify, but this should be a relatively
-				 * uncommon case, and can be optimized if it
-				 * becomes a problem. Note that we regenerate
-				 * parity when resilvering so we can write it
-				 * out to failed devices later.
-				 */
-				if (parity_errors < rm->rm_firstdatacol - n ||
-				    (zio->io_flags & ZIO_FLAG_RESILVER)) {
-					n = raidz_parity_verify(zio, rm);
-					unexpected_errors += n;
-					ASSERT(parity_errors + n <=
-					    rm->rm_firstdatacol);
-				}
+/*
+ * Return the number of reads issued.
+ */
+static int
+vdev_raidz_read_all(zio_t *zio, raidz_row_t *rr)
+{
+	vdev_t *vd = zio->io_vd;
+	int nread = 0;
 
-				goto done;
-			}
-		}
-	}
+	rr->rr_missingdata = 0;
+	rr->rr_missingparity = 0;
 
 	/*
-	 * This isn't a typical situation -- either we got a read error or
-	 * a child silently returned bad data. Read every block so we can
-	 * try again with as much data and parity as we can track down. If
-	 * we've already been through once before, all children will be marked
-	 * as tried so we'll proceed to combinatorial reconstruction.
+	 * If this rows contains empty sectors which are not required
+	 * for a normal read then allocate an ABD for them now so they
+	 * may be read, verified, and any needed repairs performed.
 	 */
-	unexpected_errors = 1;
-	rm->rm_missingdata = 0;
-	rm->rm_missingparity = 0;
+	if (rr->rr_nempty && rr->rr_abd_empty == NULL)
+		vdev_draid_map_alloc_empty(zio, rr);
 
-	for (c = 0; c < rm->rm_cols; c++) {
-		if (rm->rm_col[c].rc_tried)
+	for (int c = 0; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+		if (rc->rc_tried || rc->rc_size == 0)
 			continue;
 
-		zio_vdev_io_redone(zio);
-		do {
-			rc = &rm->rm_col[c];
-			if (rc->rc_tried)
-				continue;
-			zio_nowait(zio_vdev_child_io(zio, NULL,
-			    vd->vdev_child[rc->rc_devidx],
-			    rc->rc_offset, rc->rc_abd, rc->rc_size,
-			    zio->io_type, zio->io_priority, 0,
-			    vdev_raidz_child_done, rc));
-		} while (++c < rm->rm_cols);
-
-		return;
+		zio_nowait(zio_vdev_child_io(zio, NULL,
+		    vd->vdev_child[rc->rc_devidx],
+		    rc->rc_offset, rc->rc_abd, rc->rc_size,
+		    zio->io_type, zio->io_priority, 0,
+		    vdev_raidz_child_done, rc));
+		nread++;
 	}
+	return (nread);
+}
 
-	/*
-	 * At this point we've attempted to reconstruct the data given the
-	 * errors we detected, and we've attempted to read all columns. There
-	 * must, therefore, be one or more additional problems -- silent errors
-	 * resulting in invalid data rather than explicit I/O errors resulting
-	 * in absent data. We check if there is enough additional data to
-	 * possibly reconstruct the data and then perform combinatorial
-	 * reconstruction over all possible combinations. If that fails,
-	 * we're cooked.
-	 */
-	if (total_errors > rm->rm_firstdatacol) {
-		zio->io_error = vdev_raidz_worst_error(rm);
+/*
+ * We're here because either there were too many errors to even attempt
+ * reconstruction (total_errors == rm_first_datacol), or vdev_*_combrec()
+ * failed. In either case, there is enough bad data to prevent reconstruction.
+ * Start checksum ereports for all children which haven't failed.
+ */
+static void
+vdev_raidz_io_done_unrecoverable(zio_t *zio)
+{
+	raidz_map_t *rm = zio->io_vsd;
 
-	} else if (total_errors < rm->rm_firstdatacol &&
-	    (code = vdev_raidz_combrec(zio, total_errors, data_errors)) != 0) {
-		/*
-		 * If we didn't use all the available parity for the
-		 * combinatorial reconstruction, verify that the remaining
-		 * parity is correct.
-		 */
-		if (code != (1 << rm->rm_firstdatacol) - 1)
-			(void) raidz_parity_verify(zio, rm);
-	} else {
-		/*
-		 * We're here because either:
-		 *
-		 *	total_errors == rm_first_datacol, or
-		 *	vdev_raidz_combrec() failed
-		 *
-		 * In either case, there is enough bad data to prevent
-		 * reconstruction.
-		 *
-		 * Start checksum ereports for all children which haven't
-		 * failed, and the IO wasn't speculative.
-		 */
-		zio->io_error = SET_ERROR(ECKSUM);
-
-		if (!(zio->io_flags & ZIO_FLAG_SPECULATIVE)) {
-			for (c = 0; c < rm->rm_cols; c++) {
-				vdev_t *cvd;
-				rc = &rm->rm_col[c];
-				cvd = vd->vdev_child[rc->rc_devidx];
-				if (rc->rc_error != 0)
-					continue;
+	for (int i = 0; i < rm->rm_nrows; i++) {
+		raidz_row_t *rr = rm->rm_row[i];
 
-				zio_bad_cksum_t zbc;
-				zbc.zbc_has_cksum = 0;
-				zbc.zbc_injected = rm->rm_ecksuminjected;
-
-				int ret = zfs_ereport_start_checksum(
-				    zio->io_spa, cvd, &zio->io_bookmark, zio,
-				    rc->rc_offset, rc->rc_size,
-				    (void *)(uintptr_t)c, &zbc);
-				if (ret != EALREADY) {
-					mutex_enter(&cvd->vdev_stat_lock);
-					cvd->vdev_stat.vs_checksum_errors++;
-					mutex_exit(&cvd->vdev_stat_lock);
-				}
+		for (int c = 0; c < rr->rr_cols; c++) {
+			raidz_col_t *rc = &rr->rr_col[c];
+			vdev_t *cvd = zio->io_vd->vdev_child[rc->rc_devidx];
+
+			if (rc->rc_error != 0)
+				continue;
+
+			zio_bad_cksum_t zbc;
+			zbc.zbc_has_cksum = 0;
+			zbc.zbc_injected = rm->rm_ecksuminjected;
+
+			int ret = zfs_ereport_start_checksum(zio->io_spa,
+			    cvd, &zio->io_bookmark, zio, rc->rc_offset,
+			    rc->rc_size, (void *)(uintptr_t)c, &zbc);
+			if (ret != EALREADY) {
+				mutex_enter(&cvd->vdev_stat_lock);
+				cvd->vdev_stat.vs_checksum_errors++;
+				mutex_exit(&cvd->vdev_stat_lock);
 			}
 		}
 	}
+}
 
-done:
-	zio_checksum_verified(zio);
+void
+vdev_raidz_io_done(zio_t *zio)
+{
+	raidz_map_t *rm = zio->io_vsd;
 
-	if (zio->io_error == 0 && spa_writeable(zio->io_spa) &&
-	    (unexpected_errors || (zio->io_flags & ZIO_FLAG_RESILVER))) {
-		/*
-		 * Use the good data we have in hand to repair damaged children.
-		 */
-		for (c = 0; c < rm->rm_cols; c++) {
-			rc = &rm->rm_col[c];
-			cvd = vd->vdev_child[rc->rc_devidx];
+	if (zio->io_type == ZIO_TYPE_WRITE) {
+		for (int i = 0; i < rm->rm_nrows; i++) {
+			vdev_raidz_io_done_write_impl(zio, rm->rm_row[i]);
+		}
+	} else {
+		for (int i = 0; i < rm->rm_nrows; i++) {
+			raidz_row_t *rr = rm->rm_row[i];
+			rr->rr_code =
+			    vdev_raidz_io_done_reconstruct_known_missing(zio,
+			    rm, rr);
+		}
 
-			if (rc->rc_error == 0)
-				continue;
+		if (raidz_checksum_verify(zio) == 0) {
+			for (int i = 0; i < rm->rm_nrows; i++) {
+				raidz_row_t *rr = rm->rm_row[i];
+				vdev_raidz_io_done_verified(zio, rr);
+			}
+			zio_checksum_verified(zio);
+		} else {
+			/*
+			 * A sequential resilver has no checksum which makes
+			 * combinatoral reconstruction impossible. This code
+			 * path is unreachable since raidz_checksum_verify()
+			 * has no checksum to verify and must succeed.
+			 */
+			ASSERT3U(zio->io_priority, !=, ZIO_PRIORITY_REBUILD);
 
-			zio_nowait(zio_vdev_child_io(zio, NULL, cvd,
-			    rc->rc_offset, rc->rc_abd, rc->rc_size,
-			    ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE,
-			    ZIO_FLAG_IO_REPAIR | (unexpected_errors ?
-			    ZIO_FLAG_SELF_HEAL : 0), NULL, NULL));
+			/*
+			 * This isn't a typical situation -- either we got a
+			 * read error or a child silently returned bad data.
+			 * Read every block so we can try again with as much
+			 * data and parity as we can track down. If we've
+			 * already been through once before, all children will
+			 * be marked as tried so we'll proceed to combinatorial
+			 * reconstruction.
+			 */
+			int nread = 0;
+			for (int i = 0; i < rm->rm_nrows; i++) {
+				nread += vdev_raidz_read_all(zio,
+				    rm->rm_row[i]);
+			}
+			if (nread != 0) {
+				/*
+				 * Normally our stage is VDEV_IO_DONE, but if
+				 * we've already called redone(), it will have
+				 * changed to VDEV_IO_START, in which case we
+				 * don't want to call redone() again.
+				 */
+				if (zio->io_stage != ZIO_STAGE_VDEV_IO_START)
+					zio_vdev_io_redone(zio);
+				return;
+			}
+
+			zio->io_error = vdev_raidz_combrec(zio);
+			if (zio->io_error == ECKSUM &&
+			    !(zio->io_flags & ZIO_FLAG_SPECULATIVE)) {
+				vdev_raidz_io_done_unrecoverable(zio);
+			}
 		}
 	}
 }
@@ -2327,7 +2564,8 @@ done:
 static void
 vdev_raidz_state_change(vdev_t *vd, int faulted, int degraded)
 {
-	if (faulted > vd->vdev_nparity)
+	vdev_raidz_t *vdrz = vd->vdev_tsd;
+	if (faulted > vdrz->vd_nparity)
 		vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN,
 		    VDEV_AUX_NO_REPLICAS);
 	else if (degraded + faulted != 0)
@@ -2343,18 +2581,26 @@ vdev_raidz_state_change(vdev_t *vd, int faulted, int degraded)
  * width blocks must be resilvered.
  */
 static boolean_t
-vdev_raidz_need_resilver(vdev_t *vd, uint64_t offset, size_t psize)
+vdev_raidz_need_resilver(vdev_t *vd, const dva_t *dva, size_t psize,
+    uint64_t phys_birth)
 {
+	vdev_raidz_t *vdrz = vd->vdev_tsd;
 	uint64_t dcols = vd->vdev_children;
-	uint64_t nparity = vd->vdev_nparity;
+	uint64_t nparity = vdrz->vd_nparity;
 	uint64_t ashift = vd->vdev_top->vdev_ashift;
 	/* The starting RAIDZ (parent) vdev sector of the block. */
-	uint64_t b = offset >> ashift;
+	uint64_t b = DVA_GET_OFFSET(dva) >> ashift;
 	/* The zio's size in units of the vdev's minimum sector size. */
 	uint64_t s = ((psize - 1) >> ashift) + 1;
 	/* The first column for this stripe. */
 	uint64_t f = b % dcols;
 
+	/* Unreachable by sequential resilver. */
+	ASSERT3U(phys_birth, !=, TXG_UNKNOWN);
+
+	if (!vdev_dtl_contains(vd, DTL_PARTIAL, phys_birth, 1))
+		return (B_FALSE);
+
 	if (s + nparity >= dcols)
 		return (B_TRUE);
 
@@ -2375,7 +2621,8 @@ vdev_raidz_need_resilver(vdev_t *vd, uint64_t offset, size_t psize)
 }
 
 static void
-vdev_raidz_xlate(vdev_t *cvd, const range_seg64_t *in, range_seg64_t *res)
+vdev_raidz_xlate(vdev_t *cvd, const range_seg64_t *logical_rs,
+    range_seg64_t *physical_rs, range_seg64_t *remain_rs)
 {
 	vdev_t *raidvd = cvd->vdev_parent;
 	ASSERT(raidvd->vdev_ops == &vdev_raidz_ops);
@@ -2385,10 +2632,10 @@ vdev_raidz_xlate(vdev_t *cvd, const range_seg64_t *in, range_seg64_t *res)
 	uint64_t ashift = raidvd->vdev_top->vdev_ashift;
 
 	/* make sure the offsets are block-aligned */
-	ASSERT0(in->rs_start % (1 << ashift));
-	ASSERT0(in->rs_end % (1 << ashift));
-	uint64_t b_start = in->rs_start >> ashift;
-	uint64_t b_end = in->rs_end >> ashift;
+	ASSERT0(logical_rs->rs_start % (1 << ashift));
+	ASSERT0(logical_rs->rs_end % (1 << ashift));
+	uint64_t b_start = logical_rs->rs_start >> ashift;
+	uint64_t b_end = logical_rs->rs_end >> ashift;
 
 	uint64_t start_row = 0;
 	if (b_start > tgt_col) /* avoid underflow */
@@ -2398,17 +2645,119 @@ vdev_raidz_xlate(vdev_t *cvd, const range_seg64_t *in, range_seg64_t *res)
 	if (b_end > tgt_col)
 		end_row = ((b_end - tgt_col - 1) / width) + 1;
 
-	res->rs_start = start_row << ashift;
-	res->rs_end = end_row << ashift;
+	physical_rs->rs_start = start_row << ashift;
+	physical_rs->rs_end = end_row << ashift;
 
-	ASSERT3U(res->rs_start, <=, in->rs_start);
-	ASSERT3U(res->rs_end - res->rs_start, <=, in->rs_end - in->rs_start);
+	ASSERT3U(physical_rs->rs_start, <=, logical_rs->rs_start);
+	ASSERT3U(physical_rs->rs_end - physical_rs->rs_start, <=,
+	    logical_rs->rs_end - logical_rs->rs_start);
+}
+
+/*
+ * Initialize private RAIDZ specific fields from the nvlist.
+ */
+static int
+vdev_raidz_init(spa_t *spa, nvlist_t *nv, void **tsd)
+{
+	vdev_raidz_t *vdrz;
+	uint64_t nparity;
+
+	uint_t children;
+	nvlist_t **child;
+	int error = nvlist_lookup_nvlist_array(nv,
+	    ZPOOL_CONFIG_CHILDREN, &child, &children);
+	if (error != 0)
+		return (SET_ERROR(EINVAL));
+
+	if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY, &nparity) == 0) {
+		if (nparity == 0 || nparity > VDEV_RAIDZ_MAXPARITY)
+			return (SET_ERROR(EINVAL));
+
+		/*
+		 * Previous versions could only support 1 or 2 parity
+		 * device.
+		 */
+		if (nparity > 1 && spa_version(spa) < SPA_VERSION_RAIDZ2)
+			return (SET_ERROR(EINVAL));
+		else if (nparity > 2 && spa_version(spa) < SPA_VERSION_RAIDZ3)
+			return (SET_ERROR(EINVAL));
+	} else {
+		/*
+		 * We require the parity to be specified for SPAs that
+		 * support multiple parity levels.
+		 */
+		if (spa_version(spa) >= SPA_VERSION_RAIDZ2)
+			return (SET_ERROR(EINVAL));
+
+		/*
+		 * Otherwise, we default to 1 parity device for RAID-Z.
+		 */
+		nparity = 1;
+	}
+
+	vdrz = kmem_zalloc(sizeof (*vdrz), KM_SLEEP);
+	vdrz->vd_logical_width = children;
+	vdrz->vd_nparity = nparity;
+
+	*tsd = vdrz;
+
+	return (0);
+}
+
+static void
+vdev_raidz_fini(vdev_t *vd)
+{
+	kmem_free(vd->vdev_tsd, sizeof (vdev_raidz_t));
+}
+
+/*
+ * Add RAIDZ specific fields to the config nvlist.
+ */
+static void
+vdev_raidz_config_generate(vdev_t *vd, nvlist_t *nv)
+{
+	ASSERT3P(vd->vdev_ops, ==, &vdev_raidz_ops);
+	vdev_raidz_t *vdrz = vd->vdev_tsd;
+
+	/*
+	 * Make sure someone hasn't managed to sneak a fancy new vdev
+	 * into a crufty old storage pool.
+	 */
+	ASSERT(vdrz->vd_nparity == 1 ||
+	    (vdrz->vd_nparity <= 2 &&
+	    spa_version(vd->vdev_spa) >= SPA_VERSION_RAIDZ2) ||
+	    (vdrz->vd_nparity <= 3 &&
+	    spa_version(vd->vdev_spa) >= SPA_VERSION_RAIDZ3));
+
+	/*
+	 * Note that we'll add these even on storage pools where they
+	 * aren't strictly required -- older software will just ignore
+	 * it.
+	 */
+	fnvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY, vdrz->vd_nparity);
+}
+
+static uint64_t
+vdev_raidz_nparity(vdev_t *vd)
+{
+	vdev_raidz_t *vdrz = vd->vdev_tsd;
+	return (vdrz->vd_nparity);
+}
+
+static uint64_t
+vdev_raidz_ndisks(vdev_t *vd)
+{
+	return (vd->vdev_children);
 }
 
 vdev_ops_t vdev_raidz_ops = {
+	.vdev_op_init = vdev_raidz_init,
+	.vdev_op_fini = vdev_raidz_fini,
 	.vdev_op_open = vdev_raidz_open,
 	.vdev_op_close = vdev_raidz_close,
 	.vdev_op_asize = vdev_raidz_asize,
+	.vdev_op_min_asize = vdev_raidz_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = vdev_raidz_io_start,
 	.vdev_op_io_done = vdev_raidz_io_done,
 	.vdev_op_state_change = vdev_raidz_state_change,
@@ -2417,6 +2766,11 @@ vdev_ops_t vdev_raidz_ops = {
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = NULL,
 	.vdev_op_xlate = vdev_raidz_xlate,
+	.vdev_op_rebuild_asize = NULL,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = vdev_raidz_config_generate,
+	.vdev_op_nparity = vdev_raidz_nparity,
+	.vdev_op_ndisks = vdev_raidz_ndisks,
 	.vdev_op_type = VDEV_TYPE_RAIDZ,	/* name of this vdev type */
 	.vdev_op_leaf = B_FALSE			/* not a leaf vdev */
 };
diff --git a/module/zfs/vdev_raidz_math.c b/module/zfs/vdev_raidz_math.c
index 9595a7b95..a8eca06f9 100644
--- a/module/zfs/vdev_raidz_math.c
+++ b/module/zfs/vdev_raidz_math.c
@@ -149,7 +149,7 @@ vdev_raidz_math_get_ops(void)
  * Select parity generation method for raidz_map
  */
 int
-vdev_raidz_math_generate(raidz_map_t *rm)
+vdev_raidz_math_generate(raidz_map_t *rm, raidz_row_t *rr)
 {
 	raidz_gen_f gen_parity = NULL;
 
@@ -174,7 +174,7 @@ vdev_raidz_math_generate(raidz_map_t *rm)
 	if (gen_parity == NULL)
 		return (RAIDZ_ORIGINAL_IMPL);
 
-	gen_parity(rm);
+	gen_parity(rr);
 
 	return (0);
 }
@@ -241,8 +241,8 @@ reconstruct_fun_pqr_sel(raidz_map_t *rm, const int *parity_valid,
  * @nbaddata     - Number of failed data columns
  */
 int
-vdev_raidz_math_reconstruct(raidz_map_t *rm, const int *parity_valid,
-    const int *dt, const int nbaddata)
+vdev_raidz_math_reconstruct(raidz_map_t *rm, raidz_row_t *rr,
+    const int *parity_valid, const int *dt, const int nbaddata)
 {
 	raidz_rec_f rec_fn = NULL;
 
@@ -265,7 +265,7 @@ vdev_raidz_math_reconstruct(raidz_map_t *rm, const int *parity_valid,
 	if (rec_fn == NULL)
 		return (RAIDZ_ORIGINAL_IMPL);
 	else
-		return (rec_fn(rm, dt));
+		return (rec_fn(rr, dt));
 }
 
 const char *raidz_gen_name[] = {
diff --git a/module/zfs/vdev_raidz_math_impl.h b/module/zfs/vdev_raidz_math_impl.h
index 89c2082c4..35e016fc6 100644
--- a/module/zfs/vdev_raidz_math_impl.h
+++ b/module/zfs/vdev_raidz_math_impl.h
@@ -26,6 +26,7 @@
 #define	_VDEV_RAIDZ_MATH_IMPL_H
 
 #include <sys/types.h>
+#include <sys/vdev_raidz_impl.h>
 
 #define	raidz_inline inline __attribute__((always_inline))
 #ifndef noinline
@@ -36,33 +37,33 @@
  * Functions calculate multiplication constants for data reconstruction.
  * Coefficients depend on RAIDZ geometry, indexes of failed child vdevs, and
  * used parity columns for reconstruction.
- * @rm			RAIDZ map
+ * @rr			RAIDZ row
  * @tgtidx		array of missing data indexes
  * @coeff		output array of coefficients. Array must be provided by
  *         		user and must hold minimum MUL_CNT values.
  */
 static noinline void
-raidz_rec_q_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
+raidz_rec_q_coeff(const raidz_row_t *rr, const int *tgtidx, unsigned *coeff)
 {
-	const unsigned ncols = raidz_ncols(rm);
+	const unsigned ncols = rr->rr_cols;
 	const unsigned x = tgtidx[TARGET_X];
 
 	coeff[MUL_Q_X] = gf_exp2(255 - (ncols - x - 1));
 }
 
 static noinline void
-raidz_rec_r_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
+raidz_rec_r_coeff(const raidz_row_t *rr, const int *tgtidx, unsigned *coeff)
 {
-	const unsigned ncols = raidz_ncols(rm);
+	const unsigned ncols = rr->rr_cols;
 	const unsigned x = tgtidx[TARGET_X];
 
 	coeff[MUL_R_X] = gf_exp4(255 - (ncols - x - 1));
 }
 
 static noinline void
-raidz_rec_pq_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
+raidz_rec_pq_coeff(const raidz_row_t *rr, const int *tgtidx, unsigned *coeff)
 {
-	const unsigned ncols = raidz_ncols(rm);
+	const unsigned ncols = rr->rr_cols;
 	const unsigned x = tgtidx[TARGET_X];
 	const unsigned y = tgtidx[TARGET_Y];
 	gf_t a, b, e;
@@ -76,9 +77,9 @@ raidz_rec_pq_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
 }
 
 static noinline void
-raidz_rec_pr_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
+raidz_rec_pr_coeff(const raidz_row_t *rr, const int *tgtidx, unsigned *coeff)
 {
-	const unsigned ncols = raidz_ncols(rm);
+	const unsigned ncols = rr->rr_cols;
 	const unsigned x = tgtidx[TARGET_X];
 	const unsigned y = tgtidx[TARGET_Y];
 
@@ -93,9 +94,9 @@ raidz_rec_pr_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
 }
 
 static noinline void
-raidz_rec_qr_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
+raidz_rec_qr_coeff(const raidz_row_t *rr, const int *tgtidx, unsigned *coeff)
 {
-	const unsigned ncols = raidz_ncols(rm);
+	const unsigned ncols = rr->rr_cols;
 	const unsigned x = tgtidx[TARGET_X];
 	const unsigned y = tgtidx[TARGET_Y];
 
@@ -114,9 +115,9 @@ raidz_rec_qr_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
 }
 
 static noinline void
-raidz_rec_pqr_coeff(const raidz_map_t *rm, const int *tgtidx, unsigned *coeff)
+raidz_rec_pqr_coeff(const raidz_row_t *rr, const int *tgtidx, unsigned *coeff)
 {
-	const unsigned ncols = raidz_ncols(rm);
+	const unsigned ncols = rr->rr_cols;
 	const unsigned x = tgtidx[TARGET_X];
 	const unsigned y = tgtidx[TARGET_Y];
 	const unsigned z = tgtidx[TARGET_Z];
@@ -347,26 +348,26 @@ raidz_mul_abd_cb(void *dc, size_t size, void *private)
 /*
  * Generate P parity (RAIDZ1)
  *
- * @rm	RAIDZ map
+ * @rr	RAIDZ row
  */
 static raidz_inline void
-raidz_generate_p_impl(raidz_map_t * const rm)
+raidz_generate_p_impl(raidz_row_t * const rr)
 {
 	size_t c;
-	const size_t ncols = raidz_ncols(rm);
-	const size_t psize = rm->rm_col[CODE_P].rc_size;
-	abd_t *pabd = rm->rm_col[CODE_P].rc_abd;
+	const size_t ncols = rr->rr_cols;
+	const size_t psize = rr->rr_col[CODE_P].rc_size;
+	abd_t *pabd = rr->rr_col[CODE_P].rc_abd;
 	size_t size;
 	abd_t *dabd;
 
 	raidz_math_begin();
 
 	/* start with first data column */
-	raidz_copy(pabd, rm->rm_col[1].rc_abd, psize);
+	raidz_copy(pabd, rr->rr_col[1].rc_abd, psize);
 
 	for (c = 2; c < ncols; c++) {
-		dabd = rm->rm_col[c].rc_abd;
-		size = rm->rm_col[c].rc_size;
+		dabd = rr->rr_col[c].rc_abd;
+		size = rr->rr_col[c].rc_size;
 
 		/* add data column */
 		raidz_add(pabd, dabd, size);
@@ -414,29 +415,29 @@ raidz_gen_pq_add(void **c, const void *dc, const size_t csize,
 /*
  * Generate PQ parity (RAIDZ2)
  *
- * @rm	RAIDZ map
+ * @rr	RAIDZ row
  */
 static raidz_inline void
-raidz_generate_pq_impl(raidz_map_t * const rm)
+raidz_generate_pq_impl(raidz_row_t * const rr)
 {
 	size_t c;
-	const size_t ncols = raidz_ncols(rm);
-	const size_t csize = rm->rm_col[CODE_P].rc_size;
+	const size_t ncols = rr->rr_cols;
+	const size_t csize = rr->rr_col[CODE_P].rc_size;
 	size_t dsize;
 	abd_t *dabd;
 	abd_t *cabds[] = {
-		rm->rm_col[CODE_P].rc_abd,
-		rm->rm_col[CODE_Q].rc_abd
+		rr->rr_col[CODE_P].rc_abd,
+		rr->rr_col[CODE_Q].rc_abd
 	};
 
 	raidz_math_begin();
 
-	raidz_copy(cabds[CODE_P], rm->rm_col[2].rc_abd, csize);
-	raidz_copy(cabds[CODE_Q], rm->rm_col[2].rc_abd, csize);
+	raidz_copy(cabds[CODE_P], rr->rr_col[2].rc_abd, csize);
+	raidz_copy(cabds[CODE_Q], rr->rr_col[2].rc_abd, csize);
 
 	for (c = 3; c < ncols; c++) {
-		dabd = rm->rm_col[c].rc_abd;
-		dsize = rm->rm_col[c].rc_size;
+		dabd = rr->rr_col[c].rc_abd;
+		dsize = rr->rr_col[c].rc_size;
 
 		abd_raidz_gen_iterate(cabds, dabd, csize, dsize, 2,
 		    raidz_gen_pq_add);
@@ -487,31 +488,31 @@ raidz_gen_pqr_add(void **c, const void *dc, const size_t csize,
 /*
  * Generate PQR parity (RAIDZ2)
  *
- * @rm	RAIDZ map
+ * @rr	RAIDZ row
  */
 static raidz_inline void
-raidz_generate_pqr_impl(raidz_map_t * const rm)
+raidz_generate_pqr_impl(raidz_row_t * const rr)
 {
 	size_t c;
-	const size_t ncols = raidz_ncols(rm);
-	const size_t csize = rm->rm_col[CODE_P].rc_size;
+	const size_t ncols = rr->rr_cols;
+	const size_t csize = rr->rr_col[CODE_P].rc_size;
 	size_t dsize;
 	abd_t *dabd;
 	abd_t *cabds[] = {
-		rm->rm_col[CODE_P].rc_abd,
-		rm->rm_col[CODE_Q].rc_abd,
-		rm->rm_col[CODE_R].rc_abd
+		rr->rr_col[CODE_P].rc_abd,
+		rr->rr_col[CODE_Q].rc_abd,
+		rr->rr_col[CODE_R].rc_abd
 	};
 
 	raidz_math_begin();
 
-	raidz_copy(cabds[CODE_P], rm->rm_col[3].rc_abd, csize);
-	raidz_copy(cabds[CODE_Q], rm->rm_col[3].rc_abd, csize);
-	raidz_copy(cabds[CODE_R], rm->rm_col[3].rc_abd, csize);
+	raidz_copy(cabds[CODE_P], rr->rr_col[3].rc_abd, csize);
+	raidz_copy(cabds[CODE_Q], rr->rr_col[3].rc_abd, csize);
+	raidz_copy(cabds[CODE_R], rr->rr_col[3].rc_abd, csize);
 
 	for (c = 4; c < ncols; c++) {
-		dabd = rm->rm_col[c].rc_abd;
-		dsize = rm->rm_col[c].rc_size;
+		dabd = rr->rr_col[c].rc_abd;
+		dsize = rr->rr_col[c].rc_size;
 
 		abd_raidz_gen_iterate(cabds, dabd, csize, dsize, 3,
 		    raidz_gen_pqr_add);
@@ -579,33 +580,36 @@ raidz_generate_pqr_impl(raidz_map_t * const rm)
  * @syn_method	raidz_add_abd()
  * @rec_method	not applicable
  *
- * @rm		RAIDZ map
+ * @rr		RAIDZ row
  * @tgtidx	array of missing data indexes
  */
 static raidz_inline int
-raidz_reconstruct_p_impl(raidz_map_t *rm, const int *tgtidx)
+raidz_reconstruct_p_impl(raidz_row_t *rr, const int *tgtidx)
 {
 	size_t c;
-	const size_t firstdc = raidz_parity(rm);
-	const size_t ncols = raidz_ncols(rm);
+	const size_t firstdc = rr->rr_firstdatacol;
+	const size_t ncols = rr->rr_cols;
 	const size_t x = tgtidx[TARGET_X];
-	const size_t xsize = rm->rm_col[x].rc_size;
-	abd_t *xabd = rm->rm_col[x].rc_abd;
+	const size_t xsize = rr->rr_col[x].rc_size;
+	abd_t *xabd = rr->rr_col[x].rc_abd;
 	size_t size;
 	abd_t *dabd;
 
+	if (xabd == NULL)
+		return (1 << CODE_P);
+
 	raidz_math_begin();
 
 	/* copy P into target */
-	raidz_copy(xabd, rm->rm_col[CODE_P].rc_abd, xsize);
+	raidz_copy(xabd, rr->rr_col[CODE_P].rc_abd, xsize);
 
 	/* generate p_syndrome */
 	for (c = firstdc; c < ncols; c++) {
 		if (c == x)
 			continue;
 
-		dabd = rm->rm_col[c].rc_abd;
-		size = MIN(rm->rm_col[c].rc_size, xsize);
+		dabd = rr->rr_col[c].rc_abd;
+		size = MIN(rr->rr_col[c].rc_size, xsize);
 
 		raidz_add(xabd, dabd, size);
 	}
@@ -653,30 +657,33 @@ raidz_syn_q_abd(void **xc, const void *dc, const size_t xsize,
  * @syn_method	raidz_add_abd()
  * @rec_method	raidz_mul_abd_cb()
  *
- * @rm		RAIDZ map
+ * @rr		RAIDZ row
  * @tgtidx	array of missing data indexes
  */
 static raidz_inline int
-raidz_reconstruct_q_impl(raidz_map_t *rm, const int *tgtidx)
+raidz_reconstruct_q_impl(raidz_row_t *rr, const int *tgtidx)
 {
 	size_t c;
 	size_t dsize;
 	abd_t *dabd;
-	const size_t firstdc = raidz_parity(rm);
-	const size_t ncols = raidz_ncols(rm);
+	const size_t firstdc = rr->rr_firstdatacol;
+	const size_t ncols = rr->rr_cols;
 	const size_t x = tgtidx[TARGET_X];
-	abd_t *xabd = rm->rm_col[x].rc_abd;
-	const size_t xsize = rm->rm_col[x].rc_size;
+	abd_t *xabd = rr->rr_col[x].rc_abd;
+	const size_t xsize = rr->rr_col[x].rc_size;
 	abd_t *tabds[] = { xabd };
 
+	if (xabd == NULL)
+		return (1 << CODE_Q);
+
 	unsigned coeff[MUL_CNT];
-	raidz_rec_q_coeff(rm, tgtidx, coeff);
+	raidz_rec_q_coeff(rr, tgtidx, coeff);
 
 	raidz_math_begin();
 
 	/* Start with first data column if present */
 	if (firstdc != x) {
-		raidz_copy(xabd, rm->rm_col[firstdc].rc_abd, xsize);
+		raidz_copy(xabd, rr->rr_col[firstdc].rc_abd, xsize);
 	} else {
 		raidz_zero(xabd, xsize);
 	}
@@ -687,8 +694,8 @@ raidz_reconstruct_q_impl(raidz_map_t *rm, const int *tgtidx)
 			dabd = NULL;
 			dsize = 0;
 		} else {
-			dabd = rm->rm_col[c].rc_abd;
-			dsize = rm->rm_col[c].rc_size;
+			dabd = rr->rr_col[c].rc_abd;
+			dsize = rr->rr_col[c].rc_size;
 		}
 
 		abd_raidz_gen_iterate(tabds, dabd, xsize, dsize, 1,
@@ -696,7 +703,7 @@ raidz_reconstruct_q_impl(raidz_map_t *rm, const int *tgtidx)
 	}
 
 	/* add Q to the syndrome */
-	raidz_add(xabd, rm->rm_col[CODE_Q].rc_abd, xsize);
+	raidz_add(xabd, rr->rr_col[CODE_Q].rc_abd, xsize);
 
 	/* transform the syndrome */
 	abd_iterate_func(xabd, 0, xsize, raidz_mul_abd_cb, (void*) coeff);
@@ -744,30 +751,33 @@ raidz_syn_r_abd(void **xc, const void *dc, const size_t tsize,
  * @syn_method	raidz_add_abd()
  * @rec_method	raidz_mul_abd_cb()
  *
- * @rm		RAIDZ map
+ * @rr		RAIDZ rr
  * @tgtidx	array of missing data indexes
  */
 static raidz_inline int
-raidz_reconstruct_r_impl(raidz_map_t *rm, const int *tgtidx)
+raidz_reconstruct_r_impl(raidz_row_t *rr, const int *tgtidx)
 {
 	size_t c;
 	size_t dsize;
 	abd_t *dabd;
-	const size_t firstdc = raidz_parity(rm);
-	const size_t ncols = raidz_ncols(rm);
+	const size_t firstdc = rr->rr_firstdatacol;
+	const size_t ncols = rr->rr_cols;
 	const size_t x = tgtidx[TARGET_X];
-	const size_t xsize = rm->rm_col[x].rc_size;
-	abd_t *xabd = rm->rm_col[x].rc_abd;
+	const size_t xsize = rr->rr_col[x].rc_size;
+	abd_t *xabd = rr->rr_col[x].rc_abd;
 	abd_t *tabds[] = { xabd };
 
+	if (xabd == NULL)
+		return (1 << CODE_R);
+
 	unsigned coeff[MUL_CNT];
-	raidz_rec_r_coeff(rm, tgtidx, coeff);
+	raidz_rec_r_coeff(rr, tgtidx, coeff);
 
 	raidz_math_begin();
 
 	/* Start with first data column if present */
 	if (firstdc != x) {
-		raidz_copy(xabd, rm->rm_col[firstdc].rc_abd, xsize);
+		raidz_copy(xabd, rr->rr_col[firstdc].rc_abd, xsize);
 	} else {
 		raidz_zero(xabd, xsize);
 	}
@@ -779,8 +789,8 @@ raidz_reconstruct_r_impl(raidz_map_t *rm, const int *tgtidx)
 			dabd = NULL;
 			dsize = 0;
 		} else {
-			dabd = rm->rm_col[c].rc_abd;
-			dsize = rm->rm_col[c].rc_size;
+			dabd = rr->rr_col[c].rc_abd;
+			dsize = rr->rr_col[c].rc_size;
 		}
 
 		abd_raidz_gen_iterate(tabds, dabd, xsize, dsize, 1,
@@ -788,7 +798,7 @@ raidz_reconstruct_r_impl(raidz_map_t *rm, const int *tgtidx)
 	}
 
 	/* add R to the syndrome */
-	raidz_add(xabd, rm->rm_col[CODE_R].rc_abd, xsize);
+	raidz_add(xabd, rr->rr_col[CODE_R].rc_abd, xsize);
 
 	/* transform the syndrome */
 	abd_iterate_func(xabd, 0, xsize, raidz_mul_abd_cb, (void *)coeff);
@@ -881,31 +891,34 @@ raidz_rec_pq_abd(void **tc, const size_t tsize, void **c,
  * @syn_method	raidz_syn_pq_abd()
  * @rec_method	raidz_rec_pq_abd()
  *
- * @rm		RAIDZ map
+ * @rr		RAIDZ row
  * @tgtidx	array of missing data indexes
  */
 static raidz_inline int
-raidz_reconstruct_pq_impl(raidz_map_t *rm, const int *tgtidx)
+raidz_reconstruct_pq_impl(raidz_row_t *rr, const int *tgtidx)
 {
 	size_t c;
 	size_t dsize;
 	abd_t *dabd;
-	const size_t firstdc = raidz_parity(rm);
-	const size_t ncols = raidz_ncols(rm);
+	const size_t firstdc = rr->rr_firstdatacol;
+	const size_t ncols = rr->rr_cols;
 	const size_t x = tgtidx[TARGET_X];
 	const size_t y = tgtidx[TARGET_Y];
-	const size_t xsize = rm->rm_col[x].rc_size;
-	const size_t ysize = rm->rm_col[y].rc_size;
-	abd_t *xabd = rm->rm_col[x].rc_abd;
-	abd_t *yabd = rm->rm_col[y].rc_abd;
+	const size_t xsize = rr->rr_col[x].rc_size;
+	const size_t ysize = rr->rr_col[y].rc_size;
+	abd_t *xabd = rr->rr_col[x].rc_abd;
+	abd_t *yabd = rr->rr_col[y].rc_abd;
 	abd_t *tabds[2] = { xabd, yabd };
 	abd_t *cabds[] = {
-		rm->rm_col[CODE_P].rc_abd,
-		rm->rm_col[CODE_Q].rc_abd
+		rr->rr_col[CODE_P].rc_abd,
+		rr->rr_col[CODE_Q].rc_abd
 	};
 
+	if (xabd == NULL)
+		return ((1 << CODE_P) | (1 << CODE_Q));
+
 	unsigned coeff[MUL_CNT];
-	raidz_rec_pq_coeff(rm, tgtidx, coeff);
+	raidz_rec_pq_coeff(rr, tgtidx, coeff);
 
 	/*
 	 * Check if some of targets is shorter then others
@@ -921,8 +934,8 @@ raidz_reconstruct_pq_impl(raidz_map_t *rm, const int *tgtidx)
 
 	/* Start with first data column if present */
 	if (firstdc != x) {
-		raidz_copy(xabd, rm->rm_col[firstdc].rc_abd, xsize);
-		raidz_copy(yabd, rm->rm_col[firstdc].rc_abd, xsize);
+		raidz_copy(xabd, rr->rr_col[firstdc].rc_abd, xsize);
+		raidz_copy(yabd, rr->rr_col[firstdc].rc_abd, xsize);
 	} else {
 		raidz_zero(xabd, xsize);
 		raidz_zero(yabd, xsize);
@@ -934,8 +947,8 @@ raidz_reconstruct_pq_impl(raidz_map_t *rm, const int *tgtidx)
 			dabd = NULL;
 			dsize = 0;
 		} else {
-			dabd = rm->rm_col[c].rc_abd;
-			dsize = rm->rm_col[c].rc_size;
+			dabd = rr->rr_col[c].rc_abd;
+			dsize = rr->rr_col[c].rc_size;
 		}
 
 		abd_raidz_gen_iterate(tabds, dabd, xsize, dsize, 2,
@@ -946,7 +959,7 @@ raidz_reconstruct_pq_impl(raidz_map_t *rm, const int *tgtidx)
 
 	/* Copy shorter targets back to the original abd buffer */
 	if (ysize < xsize)
-		raidz_copy(rm->rm_col[y].rc_abd, yabd, ysize);
+		raidz_copy(rr->rr_col[y].rc_abd, yabd, ysize);
 
 	raidz_math_end();
 
@@ -1038,30 +1051,34 @@ raidz_rec_pr_abd(void **t, const size_t tsize, void **c,
  * @syn_method	raidz_syn_pr_abd()
  * @rec_method	raidz_rec_pr_abd()
  *
- * @rm		RAIDZ map
+ * @rr		RAIDZ row
  * @tgtidx	array of missing data indexes
  */
 static raidz_inline int
-raidz_reconstruct_pr_impl(raidz_map_t *rm, const int *tgtidx)
+raidz_reconstruct_pr_impl(raidz_row_t *rr, const int *tgtidx)
 {
 	size_t c;
 	size_t dsize;
 	abd_t *dabd;
-	const size_t firstdc = raidz_parity(rm);
-	const size_t ncols = raidz_ncols(rm);
+	const size_t firstdc = rr->rr_firstdatacol;
+	const size_t ncols = rr->rr_cols;
 	const size_t x = tgtidx[0];
 	const size_t y = tgtidx[1];
-	const size_t xsize = rm->rm_col[x].rc_size;
-	const size_t ysize = rm->rm_col[y].rc_size;
-	abd_t *xabd = rm->rm_col[x].rc_abd;
-	abd_t *yabd = rm->rm_col[y].rc_abd;
+	const size_t xsize = rr->rr_col[x].rc_size;
+	const size_t ysize = rr->rr_col[y].rc_size;
+	abd_t *xabd = rr->rr_col[x].rc_abd;
+	abd_t *yabd = rr->rr_col[y].rc_abd;
 	abd_t *tabds[2] = { xabd, yabd };
 	abd_t *cabds[] = {
-		rm->rm_col[CODE_P].rc_abd,
-		rm->rm_col[CODE_R].rc_abd
+		rr->rr_col[CODE_P].rc_abd,
+		rr->rr_col[CODE_R].rc_abd
 	};
+
+	if (xabd == NULL)
+		return ((1 << CODE_P) | (1 << CODE_R));
+
 	unsigned coeff[MUL_CNT];
-	raidz_rec_pr_coeff(rm, tgtidx, coeff);
+	raidz_rec_pr_coeff(rr, tgtidx, coeff);
 
 	/*
 	 * Check if some of targets are shorter then others.
@@ -1077,8 +1094,8 @@ raidz_reconstruct_pr_impl(raidz_map_t *rm, const int *tgtidx)
 
 	/* Start with first data column if present */
 	if (firstdc != x) {
-		raidz_copy(xabd, rm->rm_col[firstdc].rc_abd, xsize);
-		raidz_copy(yabd, rm->rm_col[firstdc].rc_abd, xsize);
+		raidz_copy(xabd, rr->rr_col[firstdc].rc_abd, xsize);
+		raidz_copy(yabd, rr->rr_col[firstdc].rc_abd, xsize);
 	} else {
 		raidz_zero(xabd, xsize);
 		raidz_zero(yabd, xsize);
@@ -1090,8 +1107,8 @@ raidz_reconstruct_pr_impl(raidz_map_t *rm, const int *tgtidx)
 			dabd = NULL;
 			dsize = 0;
 		} else {
-			dabd = rm->rm_col[c].rc_abd;
-			dsize = rm->rm_col[c].rc_size;
+			dabd = rr->rr_col[c].rc_abd;
+			dsize = rr->rr_col[c].rc_size;
 		}
 
 		abd_raidz_gen_iterate(tabds, dabd, xsize, dsize, 2,
@@ -1104,14 +1121,14 @@ raidz_reconstruct_pr_impl(raidz_map_t *rm, const int *tgtidx)
 	 * Copy shorter targets back to the original abd buffer
 	 */
 	if (ysize < xsize)
-		raidz_copy(rm->rm_col[y].rc_abd, yabd, ysize);
+		raidz_copy(rr->rr_col[y].rc_abd, yabd, ysize);
 
 	raidz_math_end();
 
 	if (ysize < xsize)
 		abd_free(yabd);
 
-	return ((1 << CODE_P) | (1 << CODE_Q));
+	return ((1 << CODE_P) | (1 << CODE_R));
 }
 
 
@@ -1201,30 +1218,34 @@ raidz_rec_qr_abd(void **t, const size_t tsize, void **c,
  * @syn_method	raidz_syn_qr_abd()
  * @rec_method	raidz_rec_qr_abd()
  *
- * @rm		RAIDZ map
+ * @rr		RAIDZ row
  * @tgtidx	array of missing data indexes
  */
 static raidz_inline int
-raidz_reconstruct_qr_impl(raidz_map_t *rm, const int *tgtidx)
+raidz_reconstruct_qr_impl(raidz_row_t *rr, const int *tgtidx)
 {
 	size_t c;
 	size_t dsize;
 	abd_t *dabd;
-	const size_t firstdc = raidz_parity(rm);
-	const size_t ncols = raidz_ncols(rm);
+	const size_t firstdc = rr->rr_firstdatacol;
+	const size_t ncols = rr->rr_cols;
 	const size_t x = tgtidx[TARGET_X];
 	const size_t y = tgtidx[TARGET_Y];
-	const size_t xsize = rm->rm_col[x].rc_size;
-	const size_t ysize = rm->rm_col[y].rc_size;
-	abd_t *xabd = rm->rm_col[x].rc_abd;
-	abd_t *yabd = rm->rm_col[y].rc_abd;
+	const size_t xsize = rr->rr_col[x].rc_size;
+	const size_t ysize = rr->rr_col[y].rc_size;
+	abd_t *xabd = rr->rr_col[x].rc_abd;
+	abd_t *yabd = rr->rr_col[y].rc_abd;
 	abd_t *tabds[2] = { xabd, yabd };
 	abd_t *cabds[] = {
-		rm->rm_col[CODE_Q].rc_abd,
-		rm->rm_col[CODE_R].rc_abd
+		rr->rr_col[CODE_Q].rc_abd,
+		rr->rr_col[CODE_R].rc_abd
 	};
+
+	if (xabd == NULL)
+		return ((1 << CODE_Q) | (1 << CODE_R));
+
 	unsigned coeff[MUL_CNT];
-	raidz_rec_qr_coeff(rm, tgtidx, coeff);
+	raidz_rec_qr_coeff(rr, tgtidx, coeff);
 
 	/*
 	 * Check if some of targets is shorter then others
@@ -1240,8 +1261,8 @@ raidz_reconstruct_qr_impl(raidz_map_t *rm, const int *tgtidx)
 
 	/* Start with first data column if present */
 	if (firstdc != x) {
-		raidz_copy(xabd, rm->rm_col[firstdc].rc_abd, xsize);
-		raidz_copy(yabd, rm->rm_col[firstdc].rc_abd, xsize);
+		raidz_copy(xabd, rr->rr_col[firstdc].rc_abd, xsize);
+		raidz_copy(yabd, rr->rr_col[firstdc].rc_abd, xsize);
 	} else {
 		raidz_zero(xabd, xsize);
 		raidz_zero(yabd, xsize);
@@ -1253,8 +1274,8 @@ raidz_reconstruct_qr_impl(raidz_map_t *rm, const int *tgtidx)
 			dabd = NULL;
 			dsize = 0;
 		} else {
-			dabd = rm->rm_col[c].rc_abd;
-			dsize = rm->rm_col[c].rc_size;
+			dabd = rr->rr_col[c].rc_abd;
+			dsize = rr->rr_col[c].rc_size;
 		}
 
 		abd_raidz_gen_iterate(tabds, dabd, xsize, dsize, 2,
@@ -1267,7 +1288,7 @@ raidz_reconstruct_qr_impl(raidz_map_t *rm, const int *tgtidx)
 	 * Copy shorter targets back to the original abd buffer
 	 */
 	if (ysize < xsize)
-		raidz_copy(rm->rm_col[y].rc_abd, yabd, ysize);
+		raidz_copy(rr->rr_col[y].rc_abd, yabd, ysize);
 
 	raidz_math_end();
 
@@ -1384,34 +1405,38 @@ raidz_rec_pqr_abd(void **t, const size_t tsize, void **c,
  * @syn_method	raidz_syn_pqr_abd()
  * @rec_method	raidz_rec_pqr_abd()
  *
- * @rm		RAIDZ map
+ * @rr		RAIDZ row
  * @tgtidx	array of missing data indexes
  */
 static raidz_inline int
-raidz_reconstruct_pqr_impl(raidz_map_t *rm, const int *tgtidx)
+raidz_reconstruct_pqr_impl(raidz_row_t *rr, const int *tgtidx)
 {
 	size_t c;
 	size_t dsize;
 	abd_t *dabd;
-	const size_t firstdc = raidz_parity(rm);
-	const size_t ncols = raidz_ncols(rm);
+	const size_t firstdc = rr->rr_firstdatacol;
+	const size_t ncols = rr->rr_cols;
 	const size_t x = tgtidx[TARGET_X];
 	const size_t y = tgtidx[TARGET_Y];
 	const size_t z = tgtidx[TARGET_Z];
-	const size_t xsize = rm->rm_col[x].rc_size;
-	const size_t ysize = rm->rm_col[y].rc_size;
-	const size_t zsize = rm->rm_col[z].rc_size;
-	abd_t *xabd = rm->rm_col[x].rc_abd;
-	abd_t *yabd = rm->rm_col[y].rc_abd;
-	abd_t *zabd = rm->rm_col[z].rc_abd;
+	const size_t xsize = rr->rr_col[x].rc_size;
+	const size_t ysize = rr->rr_col[y].rc_size;
+	const size_t zsize = rr->rr_col[z].rc_size;
+	abd_t *xabd = rr->rr_col[x].rc_abd;
+	abd_t *yabd = rr->rr_col[y].rc_abd;
+	abd_t *zabd = rr->rr_col[z].rc_abd;
 	abd_t *tabds[] = { xabd, yabd, zabd };
 	abd_t *cabds[] = {
-		rm->rm_col[CODE_P].rc_abd,
-		rm->rm_col[CODE_Q].rc_abd,
-		rm->rm_col[CODE_R].rc_abd
+		rr->rr_col[CODE_P].rc_abd,
+		rr->rr_col[CODE_Q].rc_abd,
+		rr->rr_col[CODE_R].rc_abd
 	};
+
+	if (xabd == NULL)
+		return ((1 << CODE_P) | (1 << CODE_Q) | (1 << CODE_R));
+
 	unsigned coeff[MUL_CNT];
-	raidz_rec_pqr_coeff(rm, tgtidx, coeff);
+	raidz_rec_pqr_coeff(rr, tgtidx, coeff);
 
 	/*
 	 * Check if some of targets is shorter then others
@@ -1431,9 +1456,9 @@ raidz_reconstruct_pqr_impl(raidz_map_t *rm, const int *tgtidx)
 
 	/* Start with first data column if present */
 	if (firstdc != x) {
-		raidz_copy(xabd, rm->rm_col[firstdc].rc_abd, xsize);
-		raidz_copy(yabd, rm->rm_col[firstdc].rc_abd, xsize);
-		raidz_copy(zabd, rm->rm_col[firstdc].rc_abd, xsize);
+		raidz_copy(xabd, rr->rr_col[firstdc].rc_abd, xsize);
+		raidz_copy(yabd, rr->rr_col[firstdc].rc_abd, xsize);
+		raidz_copy(zabd, rr->rr_col[firstdc].rc_abd, xsize);
 	} else {
 		raidz_zero(xabd, xsize);
 		raidz_zero(yabd, xsize);
@@ -1446,8 +1471,8 @@ raidz_reconstruct_pqr_impl(raidz_map_t *rm, const int *tgtidx)
 			dabd = NULL;
 			dsize = 0;
 		} else {
-			dabd = rm->rm_col[c].rc_abd;
-			dsize = rm->rm_col[c].rc_size;
+			dabd = rr->rr_col[c].rc_abd;
+			dsize = rr->rr_col[c].rc_size;
 		}
 
 		abd_raidz_gen_iterate(tabds, dabd, xsize, dsize, 3,
@@ -1460,9 +1485,9 @@ raidz_reconstruct_pqr_impl(raidz_map_t *rm, const int *tgtidx)
 	 * Copy shorter targets back to the original abd buffer
 	 */
 	if (ysize < xsize)
-		raidz_copy(rm->rm_col[y].rc_abd, yabd, ysize);
+		raidz_copy(rr->rr_col[y].rc_abd, yabd, ysize);
 	if (zsize < xsize)
-		raidz_copy(rm->rm_col[z].rc_abd, zabd, zsize);
+		raidz_copy(rr->rr_col[z].rc_abd, zabd, zsize);
 
 	raidz_math_end();
 
diff --git a/module/zfs/vdev_rebuild.c b/module/zfs/vdev_rebuild.c
index 3362d608c..784d1af15 100644
--- a/module/zfs/vdev_rebuild.c
+++ b/module/zfs/vdev_rebuild.c
@@ -25,6 +25,7 @@
  */
 
 #include <sys/vdev_impl.h>
+#include <sys/vdev_draid.h>
 #include <sys/dsl_scan.h>
 #include <sys/spa_impl.h>
 #include <sys/metaslab_impl.h>
@@ -63,13 +64,15 @@
  *
  * Limitations:
  *
- *   - Only supported for mirror vdev types.  Due to the variable stripe
- *     width used by raidz sequential reconstruction is not possible.
+ *   - Sequential reconstruction is not possible on RAIDZ due to its
+ *     variable stripe width.  Note dRAID uses a fixed stripe width which
+ *     avoids this issue, but comes at the expense of some usable capacity.
  *
- *   - Block checksums are not verified during sequential reconstuction.
+ *   - Block checksums are not verified during sequential reconstruction.
  *     Similar to traditional RAID the parity/mirror data is reconstructed
  *     but cannot be immediately double checked.  For this reason when the
- *     last active resilver completes the pool is automatically scrubbed.
+ *     last active resilver completes the pool is automatically scrubbed
+ *     by default.
  *
  *   - Deferred resilvers using sequential reconstruction are not currently
  *     supported.  When adding another vdev to an active top-level resilver
@@ -77,8 +80,8 @@
  *
  * Advantages:
  *
- *   - Sequential reconstuction is performed in LBA order which may be faster
- *     than healing reconstuction particularly when using using HDDs (or
+ *   - Sequential reconstruction is performed in LBA order which may be faster
+ *     than healing reconstruction particularly when using using HDDs (or
  *     especially with SMR devices).  Only allocated capacity is resilvered.
  *
  *   - Sequential reconstruction is not constrained by ZFS block boundaries.
@@ -86,9 +89,9 @@
  *     allowing all of these logical blocks to be repaired with a single IO.
  *
  *   - Unlike a healing resilver or scrub which are pool wide operations,
- *     sequential reconstruction is handled by the top-level mirror vdevs.
- *     This allows for it to be started or canceled on a top-level vdev
- *     without impacting any other top-level vdevs in the pool.
+ *     sequential reconstruction is handled by the top-level vdevs.  This
+ *     allows for it to be started or canceled on a top-level vdev without
+ *     impacting any other top-level vdevs in the pool.
  *
  *   - Data only referenced by a pool checkpoint will be repaired because
  *     that space is reflected in the space maps.  This differs for a
@@ -97,17 +100,35 @@
 
 
 /*
- * Maximum number of queued rebuild I/Os top-level vdev.  The number of
- * concurrent rebuild I/Os issued to the device is controlled by the
- * zfs_vdev_rebuild_min_active and zfs_vdev_rebuild_max_active module
- * options.
+ * Size of rebuild reads; defaults to 1MiB per data disk and is capped at
+ * SPA_MAXBLOCKSIZE.
  */
-unsigned int zfs_rebuild_queue_limit = 20;
+unsigned long zfs_rebuild_max_segment = 1024 * 1024;
 
 /*
- * Size of rebuild reads; defaults to 1MiB and is capped at SPA_MAXBLOCKSIZE.
+ * Maximum number of parallelly executed bytes per leaf vdev caused by a
+ * sequential resilver.  We attempt to strike a balance here between keeping
+ * the vdev queues full of I/Os at all times and not overflowing the queues
+ * to cause long latency, which would cause long txg sync times.
+ *
+ * A large default value can be safely used here because the default target
+ * segment size is also large (zfs_rebuild_max_segment=1M).  This helps keep
+ * the queue depth short.
+ *
+ * 32MB was selected as the default value to achieve good performance with
+ * a large 90-drive dRAID HDD configuration (draid2:8d:90c:2s). A sequential
+ * rebuild was unable to saturate all of the drives using smaller values.
+ * With a value of 32MB the sequential resilver write rate was measured at
+ * 800MB/s sustained while rebuilding to a distributed spare.
  */
-unsigned long zfs_rebuild_max_segment = 1024 * 1024;
+unsigned long zfs_rebuild_vdev_limit = 32 << 20;
+
+/*
+ * Automatically start a pool scrub when the last active sequential resilver
+ * completes in order to verify the checksums of all blocks which have been
+ * resilvered. This option is enabled by default and is strongly recommended.
+ */
+int zfs_rebuild_scrub_enabled = 1;
 
 /*
  * For vdev_rebuild_initiate_sync() and vdev_rebuild_reset_sync().
@@ -293,7 +314,7 @@ vdev_rebuild_complete_sync(void *arg, dmu_tx_t *tx)
 	    VDEV_TOP_ZAP_VDEV_REBUILD_PHYS, sizeof (uint64_t),
 	    REBUILD_PHYS_ENTRIES, vrp, tx));
 
-	vdev_dtl_reassess(vd,  tx->tx_txg, vrp->vrp_max_txg, B_TRUE, B_TRUE);
+	vdev_dtl_reassess(vd, tx->tx_txg, vrp->vrp_max_txg, B_TRUE, B_TRUE);
 	spa_feature_decr(vd->vdev_spa, SPA_FEATURE_DEVICE_REBUILD, tx);
 
 	spa_history_log_internal(spa, "rebuild",  tx,
@@ -306,7 +327,16 @@ vdev_rebuild_complete_sync(void *arg, dmu_tx_t *tx)
 	vd->vdev_rebuilding = B_FALSE;
 	mutex_exit(&vd->vdev_rebuild_lock);
 
-	spa_notify_waiters(spa);
+	/*
+	 * While we're in syncing context take the opportunity to
+	 * setup the scrub when there are no more active rebuilds.
+	 */
+	if (!vdev_rebuild_active(spa->spa_root_vdev) &&
+	    zfs_rebuild_scrub_enabled) {
+		pool_scan_func_t func = POOL_SCAN_SCRUB;
+		dsl_scan_setup_sync(&func, tx);
+	}
+
 	cv_broadcast(&vd->vdev_rebuild_cv);
 }
 
@@ -438,7 +468,7 @@ vdev_rebuild_cb(zio_t *zio)
 	vdev_rebuild_phys_t *vrp = &vr->vr_rebuild_phys;
 	vdev_t *vd = vr->vr_top_vdev;
 
-	mutex_enter(&vd->vdev_rebuild_io_lock);
+	mutex_enter(&vr->vr_io_lock);
 	if (zio->io_error == ENXIO && !vdev_writeable(vd)) {
 		/*
 		 * The I/O failed because the top-level vdev was unavailable.
@@ -455,34 +485,30 @@ vdev_rebuild_cb(zio_t *zio)
 
 	abd_free(zio->io_abd);
 
-	ASSERT3U(vd->vdev_rebuild_inflight, >, 0);
-	vd->vdev_rebuild_inflight--;
-	cv_broadcast(&vd->vdev_rebuild_io_cv);
-	mutex_exit(&vd->vdev_rebuild_io_lock);
+	ASSERT3U(vr->vr_bytes_inflight, >, 0);
+	vr->vr_bytes_inflight -= zio->io_size;
+	cv_broadcast(&vr->vr_io_cv);
+	mutex_exit(&vr->vr_io_lock);
 
 	spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd);
 }
 
 /*
- * Rebuild the data in this range by constructing a special dummy block
- * pointer for the given range.  It has no relation to any existing blocks
- * in the pool.  But by disabling checksum verification and issuing a scrub
- * I/O mirrored vdevs will replicate the block using any available mirror
- * leaf vdevs.
+ * Initialize a block pointer that can be used to read the given segment
+ * for sequential rebuild.
  */
 static void
-vdev_rebuild_rebuild_block(vdev_rebuild_t *vr, uint64_t start, uint64_t asize,
-    uint64_t txg)
+vdev_rebuild_blkptr_init(blkptr_t *bp, vdev_t *vd, uint64_t start,
+    uint64_t asize)
 {
-	vdev_t *vd = vr->vr_top_vdev;
-	spa_t *spa = vd->vdev_spa;
-	uint64_t psize = asize;
-
-	ASSERT(vd->vdev_ops == &vdev_mirror_ops ||
+	ASSERT(vd->vdev_ops == &vdev_draid_ops ||
+	    vd->vdev_ops == &vdev_mirror_ops ||
 	    vd->vdev_ops == &vdev_replacing_ops ||
 	    vd->vdev_ops == &vdev_spare_ops);
 
-	blkptr_t blk, *bp = &blk;
+	uint64_t psize = vd->vdev_ops == &vdev_draid_ops ?
+	    vdev_draid_asize_to_psize(vd, asize) : asize;
+
 	BP_ZERO(bp);
 
 	DVA_SET_VDEV(&bp->blk_dva[0], vd->vdev_id);
@@ -499,19 +525,6 @@ vdev_rebuild_rebuild_block(vdev_rebuild_t *vr, uint64_t start, uint64_t asize,
 	BP_SET_LEVEL(bp, 0);
 	BP_SET_DEDUP(bp, 0);
 	BP_SET_BYTEORDER(bp, ZFS_HOST_BYTEORDER);
-
-	/*
-	 * We increment the issued bytes by the asize rather than the psize
-	 * so the scanned and issued bytes may be directly compared.  This
-	 * is consistent with the scrub/resilver issued reporting.
-	 */
-	vr->vr_pass_bytes_issued += asize;
-	vr->vr_rebuild_phys.vrp_bytes_issued += asize;
-
-	zio_nowait(zio_read(spa->spa_txg_zio[txg & TXG_MASK], spa, bp,
-	    abd_alloc(psize, B_FALSE), psize, vdev_rebuild_cb, vr,
-	    ZIO_PRIORITY_REBUILD, ZIO_FLAG_RAW | ZIO_FLAG_CANFAIL |
-	    ZIO_FLAG_RESILVER, NULL));
 }
 
 /*
@@ -525,6 +538,7 @@ vdev_rebuild_range(vdev_rebuild_t *vr, uint64_t start, uint64_t size)
 	uint64_t ms_id __maybe_unused = vr->vr_scan_msp->ms_id;
 	vdev_t *vd = vr->vr_top_vdev;
 	spa_t *spa = vd->vdev_spa;
+	blkptr_t blk;
 
 	ASSERT3U(ms_id, ==, start >> vd->vdev_ms_shift);
 	ASSERT3U(ms_id, ==, (start + size - 1) >> vd->vdev_ms_shift);
@@ -532,14 +546,26 @@ vdev_rebuild_range(vdev_rebuild_t *vr, uint64_t start, uint64_t size)
 	vr->vr_pass_bytes_scanned += size;
 	vr->vr_rebuild_phys.vrp_bytes_scanned += size;
 
-	mutex_enter(&vd->vdev_rebuild_io_lock);
+	/*
+	 * Rebuild the data in this range by constructing a special block
+	 * pointer.  It has no relation to any existing blocks in the pool.
+	 * However, by disabling checksum verification and issuing a scrub IO
+	 * we can reconstruct and repair any children with missing data.
+	 */
+	vdev_rebuild_blkptr_init(&blk, vd, start, size);
+	uint64_t psize = BP_GET_PSIZE(&blk);
+
+	if (!vdev_dtl_need_resilver(vd, &blk.blk_dva[0], psize, TXG_UNKNOWN))
+		return (0);
+
+	mutex_enter(&vr->vr_io_lock);
 
 	/* Limit in flight rebuild I/Os */
-	while (vd->vdev_rebuild_inflight >= zfs_rebuild_queue_limit)
-		cv_wait(&vd->vdev_rebuild_io_cv, &vd->vdev_rebuild_io_lock);
+	while (vr->vr_bytes_inflight >= vr->vr_bytes_inflight_max)
+		cv_wait(&vr->vr_io_cv, &vr->vr_io_lock);
 
-	vd->vdev_rebuild_inflight++;
-	mutex_exit(&vd->vdev_rebuild_io_lock);
+	vr->vr_bytes_inflight += psize;
+	mutex_exit(&vr->vr_io_lock);
 
 	dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
 	VERIFY0(dmu_tx_assign(tx, TXG_WAIT));
@@ -558,46 +584,30 @@ vdev_rebuild_range(vdev_rebuild_t *vr, uint64_t start, uint64_t size)
 
 	/* When exiting write out our progress. */
 	if (vdev_rebuild_should_stop(vd)) {
-		mutex_enter(&vd->vdev_rebuild_io_lock);
-		vd->vdev_rebuild_inflight--;
-		mutex_exit(&vd->vdev_rebuild_io_lock);
+		mutex_enter(&vr->vr_io_lock);
+		vr->vr_bytes_inflight -= psize;
+		mutex_exit(&vr->vr_io_lock);
 		spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd);
 		mutex_exit(&vd->vdev_rebuild_lock);
 		dmu_tx_commit(tx);
 		return (SET_ERROR(EINTR));
 	}
 	mutex_exit(&vd->vdev_rebuild_lock);
+	dmu_tx_commit(tx);
 
 	vr->vr_scan_offset[txg & TXG_MASK] = start + size;
-	vdev_rebuild_rebuild_block(vr, start, size, txg);
+	vr->vr_pass_bytes_issued += size;
+	vr->vr_rebuild_phys.vrp_bytes_issued += size;
 
-	dmu_tx_commit(tx);
+	zio_nowait(zio_read(spa->spa_txg_zio[txg & TXG_MASK], spa, &blk,
+	    abd_alloc(psize, B_FALSE), psize, vdev_rebuild_cb, vr,
+	    ZIO_PRIORITY_REBUILD, ZIO_FLAG_RAW | ZIO_FLAG_CANFAIL |
+	    ZIO_FLAG_RESILVER, NULL));
 
 	return (0);
 }
 
 /*
- * Split range into legally-sized logical chunks given the constraints of the
- * top-level mirror vdev type.
- */
-static uint64_t
-vdev_rebuild_chunk_size(vdev_t *vd, uint64_t start, uint64_t size)
-{
-	uint64_t chunk_size, max_asize, max_segment;
-
-	ASSERT(vd->vdev_ops == &vdev_mirror_ops ||
-	    vd->vdev_ops == &vdev_replacing_ops ||
-	    vd->vdev_ops == &vdev_spare_ops);
-
-	max_segment = MIN(P2ROUNDUP(zfs_rebuild_max_segment,
-	    1 << vd->vdev_ashift), SPA_MAXBLOCKSIZE);
-	max_asize = vdev_psize_to_asize(vd, max_segment);
-	chunk_size = MIN(size, max_asize);
-
-	return (chunk_size);
-}
-
-/*
  * Issues rebuild I/Os for all ranges in the provided vr->vr_tree range tree.
  */
 static int
@@ -625,7 +635,14 @@ vdev_rebuild_ranges(vdev_rebuild_t *vr)
 		while (size > 0) {
 			uint64_t chunk_size;
 
-			chunk_size = vdev_rebuild_chunk_size(vd, start, size);
+			/*
+			 * Split range into legally-sized logical chunks
+			 * given the constraints of the top-level vdev
+			 * being rebuilt (dRAID or mirror).
+			 */
+			ASSERT3P(vd->vdev_ops, !=, NULL);
+			chunk_size = vd->vdev_ops->vdev_op_rebuild_asize(vd,
+			    start, size, zfs_rebuild_max_segment);
 
 			error = vdev_rebuild_range(vr, start, chunk_size);
 			if (error != 0)
@@ -747,10 +764,16 @@ vdev_rebuild_thread(void *arg)
 	vr->vr_top_vdev = vd;
 	vr->vr_scan_msp = NULL;
 	vr->vr_scan_tree = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0);
+	mutex_init(&vr->vr_io_lock, NULL, MUTEX_DEFAULT, NULL);
+	cv_init(&vr->vr_io_cv, NULL, CV_DEFAULT, NULL);
+
 	vr->vr_pass_start_time = gethrtime();
 	vr->vr_pass_bytes_scanned = 0;
 	vr->vr_pass_bytes_issued = 0;
 
+	vr->vr_bytes_inflight_max = MAX(1ULL << 20,
+	    zfs_rebuild_vdev_limit * vd->vdev_children);
+
 	uint64_t update_est_time = gethrtime();
 	vdev_rebuild_update_bytes_est(vd, 0);
 
@@ -780,21 +803,32 @@ vdev_rebuild_thread(void *arg)
 
 		ASSERT0(range_tree_space(vr->vr_scan_tree));
 
-		/*
-		 * Disable any new allocations to this metaslab and wait
-		 * for any writes inflight to complete.  This is needed to
-		 * ensure all allocated ranges are rebuilt.
-		 */
+		/* Disable any new allocations to this metaslab */
 		metaslab_disable(msp);
 		spa_config_exit(spa, SCL_CONFIG, FTAG);
-		txg_wait_synced(dsl, 0);
 
 		mutex_enter(&msp->ms_sync_lock);
 		mutex_enter(&msp->ms_lock);
 
 		/*
+		 * If there are outstanding allocations wait for them to be
+		 * synced.  This is needed to ensure all allocated ranges are
+		 * on disk and therefore will be rebuilt.
+		 */
+		for (int j = 0; j < TXG_SIZE; j++) {
+			if (range_tree_space(msp->ms_allocating[j])) {
+				mutex_exit(&msp->ms_lock);
+				mutex_exit(&msp->ms_sync_lock);
+				txg_wait_synced(dsl, 0);
+				mutex_enter(&msp->ms_sync_lock);
+				mutex_enter(&msp->ms_lock);
+				break;
+			}
+		}
+
+		/*
 		 * When a metaslab has been allocated from read its allocated
-		 * ranges from the space map object in to the vr_scan_tree.
+		 * ranges from the space map object into the vr_scan_tree.
 		 * Then add inflight / unflushed ranges and remove inflight /
 		 * unflushed frees.  This is the minimum range to be rebuilt.
 		 */
@@ -827,7 +861,7 @@ vdev_rebuild_thread(void *arg)
 		/*
 		 * To provide an accurate estimate re-calculate the estimated
 		 * size every 5 minutes to account for recent allocations and
-		 * frees made space maps which have not yet been rebuilt.
+		 * frees made to space maps which have not yet been rebuilt.
 		 */
 		if (gethrtime() > update_est_time + SEC2NSEC(300)) {
 			update_est_time = gethrtime();
@@ -851,11 +885,14 @@ vdev_rebuild_thread(void *arg)
 	spa_config_exit(spa, SCL_CONFIG, FTAG);
 
 	/* Wait for any remaining rebuild I/O to complete */
-	mutex_enter(&vd->vdev_rebuild_io_lock);
-	while (vd->vdev_rebuild_inflight > 0)
-		cv_wait(&vd->vdev_rebuild_io_cv, &vd->vdev_rebuild_io_lock);
+	mutex_enter(&vr->vr_io_lock);
+	while (vr->vr_bytes_inflight > 0)
+		cv_wait(&vr->vr_io_cv, &vr->vr_io_lock);
 
-	mutex_exit(&vd->vdev_rebuild_io_lock);
+	mutex_exit(&vr->vr_io_lock);
+
+	mutex_destroy(&vr->vr_io_lock);
+	cv_destroy(&vr->vr_io_cv);
 
 	spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
 
@@ -1100,5 +1137,11 @@ vdev_rebuild_get_stats(vdev_t *tvd, vdev_rebuild_stat_t *vrs)
 
 /* BEGIN CSTYLED */
 ZFS_MODULE_PARAM(zfs, zfs_, rebuild_max_segment, ULONG, ZMOD_RW,
-        "Max segment size in bytes of rebuild reads");
+	"Max segment size in bytes of rebuild reads");
+
+ZFS_MODULE_PARAM(zfs, zfs_, rebuild_vdev_limit, ULONG, ZMOD_RW,
+	"Max bytes in flight per leaf vdev for sequential resilvers");
+
+ZFS_MODULE_PARAM(zfs, zfs_, rebuild_scrub_enabled, INT, ZMOD_RW,
+	"Automatically scrub after sequential resilver completes");
 /* END CSTYLED */
diff --git a/module/zfs/vdev_removal.c b/module/zfs/vdev_removal.c
index ed7d1d4b3..4606af9aa 100644
--- a/module/zfs/vdev_removal.c
+++ b/module/zfs/vdev_removal.c
@@ -250,7 +250,7 @@ vdev_remove_initiate_sync(void *arg, dmu_tx_t *tx)
 	spa_vdev_removal_t *svr = NULL;
 	uint64_t txg __maybe_unused = dmu_tx_get_txg(tx);
 
-	ASSERT3P(vd->vdev_ops, !=, &vdev_raidz_ops);
+	ASSERT0(vdev_get_nparity(vd));
 	svr = spa_vdev_removal_create(vd);
 
 	ASSERT(vd->vdev_removing);
@@ -1120,7 +1120,7 @@ static void
 vdev_remove_enlist_zaps(vdev_t *vd, nvlist_t *zlist)
 {
 	ASSERT3P(zlist, !=, NULL);
-	ASSERT3P(vd->vdev_ops, !=, &vdev_raidz_ops);
+	ASSERT0(vdev_get_nparity(vd));
 
 	if (vd->vdev_leaf_zap != 0) {
 		char zkey[32];
@@ -2041,7 +2041,7 @@ spa_vdev_remove_top_check(vdev_t *vd)
 
 	/*
 	 * All vdevs in normal class must have the same ashift
-	 * and not be raidz.
+	 * and not be raidz or draid.
 	 */
 	vdev_t *rvd = spa->spa_root_vdev;
 	int num_indirect = 0;
@@ -2064,7 +2064,7 @@ spa_vdev_remove_top_check(vdev_t *vd)
 			num_indirect++;
 		if (!vdev_is_concrete(cvd))
 			continue;
-		if (cvd->vdev_ops == &vdev_raidz_ops)
+		if (vdev_get_nparity(cvd) != 0)
 			return (SET_ERROR(EINVAL));
 		/*
 		 * Need the mirror to be mirror of leaf vdevs only
@@ -2217,18 +2217,30 @@ spa_vdev_remove(spa_t *spa, uint64_t guid, boolean_t unspare)
 		 * in this pool.
 		 */
 		if (vd == NULL || unspare) {
-			if (vd == NULL)
-				vd = spa_lookup_by_guid(spa, guid, B_TRUE);
-			ev = spa_event_create(spa, vd, NULL,
-			    ESC_ZFS_VDEV_REMOVE_AUX);
-
-			vd_type = VDEV_TYPE_SPARE;
-			vd_path = spa_strdup(fnvlist_lookup_string(
-			    nv, ZPOOL_CONFIG_PATH));
-			spa_vdev_remove_aux(spa->spa_spares.sav_config,
-			    ZPOOL_CONFIG_SPARES, spares, nspares, nv);
-			spa_load_spares(spa);
-			spa->spa_spares.sav_sync = B_TRUE;
+			char *type;
+			boolean_t draid_spare = B_FALSE;
+
+			if (nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type)
+			    == 0 && strcmp(type, VDEV_TYPE_DRAID_SPARE) == 0)
+				draid_spare = B_TRUE;
+
+			if (vd == NULL && draid_spare) {
+				error = SET_ERROR(ENOTSUP);
+			} else {
+				if (vd == NULL)
+					vd = spa_lookup_by_guid(spa,
+					    guid, B_TRUE);
+				ev = spa_event_create(spa, vd, NULL,
+				    ESC_ZFS_VDEV_REMOVE_AUX);
+
+				vd_type = VDEV_TYPE_SPARE;
+				vd_path = spa_strdup(fnvlist_lookup_string(
+				    nv, ZPOOL_CONFIG_PATH));
+				spa_vdev_remove_aux(spa->spa_spares.sav_config,
+				    ZPOOL_CONFIG_SPARES, spares, nspares, nv);
+				spa_load_spares(spa);
+				spa->spa_spares.sav_sync = B_TRUE;
+			}
 		} else {
 			error = SET_ERROR(EBUSY);
 		}
diff --git a/module/zfs/vdev_root.c b/module/zfs/vdev_root.c
index 9e8aac7d0..45ddc2f71 100644
--- a/module/zfs/vdev_root.c
+++ b/module/zfs/vdev_root.c
@@ -142,9 +142,13 @@ vdev_root_state_change(vdev_t *vd, int faulted, int degraded)
 }
 
 vdev_ops_t vdev_root_ops = {
+	.vdev_op_init = NULL,
+	.vdev_op_fini = NULL,
 	.vdev_op_open = vdev_root_open,
 	.vdev_op_close = vdev_root_close,
 	.vdev_op_asize = vdev_default_asize,
+	.vdev_op_min_asize = vdev_default_min_asize,
+	.vdev_op_min_alloc = NULL,
 	.vdev_op_io_start = NULL,	/* not applicable to the root */
 	.vdev_op_io_done = NULL,	/* not applicable to the root */
 	.vdev_op_state_change = vdev_root_state_change,
@@ -153,6 +157,11 @@ vdev_ops_t vdev_root_ops = {
 	.vdev_op_rele = NULL,
 	.vdev_op_remap = NULL,
 	.vdev_op_xlate = NULL,
+	.vdev_op_rebuild_asize = NULL,
+	.vdev_op_metaslab_init = NULL,
+	.vdev_op_config_generate = NULL,
+	.vdev_op_nparity = NULL,
+	.vdev_op_ndisks = NULL,
 	.vdev_op_type = VDEV_TYPE_ROOT,	/* name of this vdev type */
 	.vdev_op_leaf = B_FALSE		/* not a leaf vdev */
 };
diff --git a/module/zfs/vdev_trim.c b/module/zfs/vdev_trim.c
index 02b42ddd5..895957bda 100644
--- a/module/zfs/vdev_trim.c
+++ b/module/zfs/vdev_trim.c
@@ -311,7 +311,8 @@ vdev_trim_change_state(vdev_t *vd, vdev_trim_state_t new_state,
 			vd->vdev_trim_secure = secure;
 	}
 
-	boolean_t resumed = !!(vd->vdev_trim_state == VDEV_TRIM_SUSPENDED);
+	vdev_trim_state_t old_state = vd->vdev_trim_state;
+	boolean_t resumed = (old_state == VDEV_TRIM_SUSPENDED);
 	vd->vdev_trim_state = new_state;
 
 	dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
@@ -332,9 +333,12 @@ vdev_trim_change_state(vdev_t *vd, vdev_trim_state_t new_state,
 		    "vdev=%s suspended", vd->vdev_path);
 		break;
 	case VDEV_TRIM_CANCELED:
-		spa_event_notify(spa, vd, NULL, ESC_ZFS_TRIM_CANCEL);
-		spa_history_log_internal(spa, "trim", tx,
-		    "vdev=%s canceled", vd->vdev_path);
+		if (old_state == VDEV_TRIM_ACTIVE ||
+		    old_state == VDEV_TRIM_SUSPENDED) {
+			spa_event_notify(spa, vd, NULL, ESC_ZFS_TRIM_CANCEL);
+			spa_history_log_internal(spa, "trim", tx,
+			    "vdev=%s canceled", vd->vdev_path);
+		}
 		break;
 	case VDEV_TRIM_COMPLETE:
 		spa_event_notify(spa, vd, NULL, ESC_ZFS_TRIM_FINISH);
@@ -601,6 +605,32 @@ vdev_trim_ranges(trim_args_t *ta)
 	return (0);
 }
 
+static void
+vdev_trim_xlate_last_rs_end(void *arg, range_seg64_t *physical_rs)
+{
+	uint64_t *last_rs_end = (uint64_t *)arg;
+
+	if (physical_rs->rs_end > *last_rs_end)
+		*last_rs_end = physical_rs->rs_end;
+}
+
+static void
+vdev_trim_xlate_progress(void *arg, range_seg64_t *physical_rs)
+{
+	vdev_t *vd = (vdev_t *)arg;
+
+	uint64_t size = physical_rs->rs_end - physical_rs->rs_start;
+	vd->vdev_trim_bytes_est += size;
+
+	if (vd->vdev_trim_last_offset >= physical_rs->rs_end) {
+		vd->vdev_trim_bytes_done += size;
+	} else if (vd->vdev_trim_last_offset > physical_rs->rs_start &&
+	    vd->vdev_trim_last_offset <= physical_rs->rs_end) {
+		vd->vdev_trim_bytes_done +=
+		    vd->vdev_trim_last_offset - physical_rs->rs_start;
+	}
+}
+
 /*
  * Calculates the completion percentage of a manual TRIM.
  */
@@ -618,27 +648,35 @@ vdev_trim_calculate_progress(vdev_t *vd)
 		metaslab_t *msp = vd->vdev_top->vdev_ms[i];
 		mutex_enter(&msp->ms_lock);
 
-		uint64_t ms_free = msp->ms_size -
-		    metaslab_allocated_space(msp);
-
-		if (vd->vdev_top->vdev_ops == &vdev_raidz_ops)
-			ms_free /= vd->vdev_top->vdev_children;
+		uint64_t ms_free = (msp->ms_size -
+		    metaslab_allocated_space(msp)) /
+		    vdev_get_ndisks(vd->vdev_top);
 
 		/*
 		 * Convert the metaslab range to a physical range
 		 * on our vdev. We use this to determine if we are
 		 * in the middle of this metaslab range.
 		 */
-		range_seg64_t logical_rs, physical_rs;
+		range_seg64_t logical_rs, physical_rs, remain_rs;
 		logical_rs.rs_start = msp->ms_start;
 		logical_rs.rs_end = msp->ms_start + msp->ms_size;
-		vdev_xlate(vd, &logical_rs, &physical_rs);
 
+		/* Metaslab space after this offset has not been trimmed. */
+		vdev_xlate(vd, &logical_rs, &physical_rs, &remain_rs);
 		if (vd->vdev_trim_last_offset <= physical_rs.rs_start) {
 			vd->vdev_trim_bytes_est += ms_free;
 			mutex_exit(&msp->ms_lock);
 			continue;
-		} else if (vd->vdev_trim_last_offset > physical_rs.rs_end) {
+		}
+
+		/* Metaslab space before this offset has been trimmed */
+		uint64_t last_rs_end = physical_rs.rs_end;
+		if (!vdev_xlate_is_empty(&remain_rs)) {
+			vdev_xlate_walk(vd, &remain_rs,
+			    vdev_trim_xlate_last_rs_end, &last_rs_end);
+		}
+
+		if (vd->vdev_trim_last_offset > last_rs_end) {
 			vd->vdev_trim_bytes_done += ms_free;
 			vd->vdev_trim_bytes_est += ms_free;
 			mutex_exit(&msp->ms_lock);
@@ -659,21 +697,9 @@ vdev_trim_calculate_progress(vdev_t *vd)
 		    rs != NULL; rs = zfs_btree_next(bt, &idx, &idx)) {
 			logical_rs.rs_start = rs_get_start(rs, rt);
 			logical_rs.rs_end = rs_get_end(rs, rt);
-			vdev_xlate(vd, &logical_rs, &physical_rs);
-
-			uint64_t size = physical_rs.rs_end -
-			    physical_rs.rs_start;
-			vd->vdev_trim_bytes_est += size;
-			if (vd->vdev_trim_last_offset >= physical_rs.rs_end) {
-				vd->vdev_trim_bytes_done += size;
-			} else if (vd->vdev_trim_last_offset >
-			    physical_rs.rs_start &&
-			    vd->vdev_trim_last_offset <=
-			    physical_rs.rs_end) {
-				vd->vdev_trim_bytes_done +=
-				    vd->vdev_trim_last_offset -
-				    physical_rs.rs_start;
-			}
+
+			vdev_xlate_walk(vd, &logical_rs,
+			    vdev_trim_xlate_progress, vd);
 		}
 		mutex_exit(&msp->ms_lock);
 	}
@@ -741,8 +767,38 @@ vdev_trim_load(vdev_t *vd)
 	return (err);
 }
 
+static void
+vdev_trim_xlate_range_add(void *arg, range_seg64_t *physical_rs)
+{
+	trim_args_t *ta = arg;
+	vdev_t *vd = ta->trim_vdev;
+
+	/*
+	 * Only a manual trim will be traversing the vdev sequentially.
+	 * For an auto trim all valid ranges should be added.
+	 */
+	if (ta->trim_type == TRIM_TYPE_MANUAL) {
+
+		/* Only add segments that we have not visited yet */
+		if (physical_rs->rs_end <= vd->vdev_trim_last_offset)
+			return;
+
+		/* Pick up where we left off mid-range. */
+		if (vd->vdev_trim_last_offset > physical_rs->rs_start) {
+			ASSERT3U(physical_rs->rs_end, >,
+			    vd->vdev_trim_last_offset);
+			physical_rs->rs_start = vd->vdev_trim_last_offset;
+		}
+	}
+
+	ASSERT3U(physical_rs->rs_end, >, physical_rs->rs_start);
+
+	range_tree_add(ta->trim_tree, physical_rs->rs_start,
+	    physical_rs->rs_end - physical_rs->rs_start);
+}
+
 /*
- * Convert the logical range into a physical range and add it to the
+ * Convert the logical range into physical ranges and add them to the
  * range tree passed in the trim_args_t.
  */
 static void
@@ -750,7 +806,7 @@ vdev_trim_range_add(void *arg, uint64_t start, uint64_t size)
 {
 	trim_args_t *ta = arg;
 	vdev_t *vd = ta->trim_vdev;
-	range_seg64_t logical_rs, physical_rs;
+	range_seg64_t logical_rs;
 	logical_rs.rs_start = start;
 	logical_rs.rs_end = start + size;
 
@@ -767,44 +823,7 @@ vdev_trim_range_add(void *arg, uint64_t start, uint64_t size)
 	}
 
 	ASSERT(vd->vdev_ops->vdev_op_leaf);
-	vdev_xlate(vd, &logical_rs, &physical_rs);
-
-	IMPLY(vd->vdev_top == vd,
-	    logical_rs.rs_start == physical_rs.rs_start);
-	IMPLY(vd->vdev_top == vd,
-	    logical_rs.rs_end == physical_rs.rs_end);
-
-	/*
-	 * Only a manual trim will be traversing the vdev sequentially.
-	 * For an auto trim all valid ranges should be added.
-	 */
-	if (ta->trim_type == TRIM_TYPE_MANUAL) {
-
-		/* Only add segments that we have not visited yet */
-		if (physical_rs.rs_end <= vd->vdev_trim_last_offset)
-			return;
-
-		/* Pick up where we left off mid-range. */
-		if (vd->vdev_trim_last_offset > physical_rs.rs_start) {
-			ASSERT3U(physical_rs.rs_end, >,
-			    vd->vdev_trim_last_offset);
-			physical_rs.rs_start = vd->vdev_trim_last_offset;
-		}
-	}
-
-	ASSERT3U(physical_rs.rs_end, >=, physical_rs.rs_start);
-
-	/*
-	 * With raidz, it's possible that the logical range does not live on
-	 * this leaf vdev. We only add the physical range to this vdev's if it
-	 * has a length greater than 0.
-	 */
-	if (physical_rs.rs_end > physical_rs.rs_start) {
-		range_tree_add(ta->trim_tree, physical_rs.rs_start,
-		    physical_rs.rs_end - physical_rs.rs_start);
-	} else {
-		ASSERT3U(physical_rs.rs_end, ==, physical_rs.rs_start);
-	}
+	vdev_xlate_walk(vd, &logical_rs, vdev_trim_xlate_range_add, arg);
 }
 
 /*
diff --git a/module/zfs/zfs_fm.c b/module/zfs/zfs_fm.c
index a8341f50b..ea71ef325 100644
--- a/module/zfs/zfs_fm.c
+++ b/module/zfs/zfs_fm.c
@@ -1111,7 +1111,9 @@ zfs_ereport_start_checksum(spa_t *spa, vdev_t *vd, const zbookmark_phys_t *zb,
 		bcopy(info, report->zcr_ckinfo, sizeof (*info));
 	}
 
-	report->zcr_align = 1ULL << vd->vdev_top->vdev_ashift;
+	report->zcr_sector = 1ULL << vd->vdev_top->vdev_ashift;
+	report->zcr_align =
+	    vdev_psize_to_asize(vd->vdev_top, report->zcr_sector);
 	report->zcr_length = length;
 
 #ifdef _KERNEL
diff --git a/module/zfs/zio.c b/module/zfs/zio.c
index ccba6cea3..982940dbd 100644
--- a/module/zfs/zio.c
+++ b/module/zfs/zio.c
@@ -1702,16 +1702,16 @@ zio_write_compress(zio_t *zio)
 			return (zio);
 		} else {
 			/*
-			 * Round up compressed size up to the ashift
-			 * of the smallest-ashift device, and zero the tail.
-			 * This ensures that the compressed size of the BP
-			 * (and thus compressratio property) are correct,
+			 * Round compressed size up to the minimum allocation
+			 * size of the smallest-ashift device, and zero the
+			 * tail. This ensures that the compressed size of the
+			 * BP (and thus compressratio property) are correct,
 			 * in that we charge for the padding used to fill out
 			 * the last sector.
 			 */
-			ASSERT3U(spa->spa_min_ashift, >=, SPA_MINBLOCKSHIFT);
-			size_t rounded = (size_t)P2ROUNDUP(psize,
-			    1ULL << spa->spa_min_ashift);
+			ASSERT3U(spa->spa_min_alloc, >=, SPA_MINBLOCKSHIFT);
+			size_t rounded = (size_t)roundup(psize,
+			    spa->spa_min_alloc);
 			if (rounded >= lsize) {
 				compress = ZIO_COMPRESS_OFF;
 				zio_buf_free(cbuf, lsize);
@@ -3754,19 +3754,37 @@ zio_vdev_io_start(zio_t *zio)
 	 * However, indirect vdevs point off to other vdevs which may have
 	 * DTL's, so we never bypass them.  The child i/os on concrete vdevs
 	 * will be properly bypassed instead.
+	 *
+	 * Leaf DTL_PARTIAL can be empty when a legitimate write comes from
+	 * a dRAID spare vdev. For example, when a dRAID spare is first
+	 * used, its spare blocks need to be written to but the leaf vdev's
+	 * of such blocks can have empty DTL_PARTIAL.
+	 *
+	 * There seemed no clean way to allow such writes while bypassing
+	 * spurious ones. At this point, just avoid all bypassing for dRAID
+	 * for correctness.
 	 */
 	if ((zio->io_flags & ZIO_FLAG_IO_REPAIR) &&
 	    !(zio->io_flags & ZIO_FLAG_SELF_HEAL) &&
 	    zio->io_txg != 0 &&	/* not a delegated i/o */
 	    vd->vdev_ops != &vdev_indirect_ops &&
+	    vd->vdev_top->vdev_ops != &vdev_draid_ops &&
 	    !vdev_dtl_contains(vd, DTL_PARTIAL, zio->io_txg, 1)) {
 		ASSERT(zio->io_type == ZIO_TYPE_WRITE);
 		zio_vdev_io_bypass(zio);
 		return (zio);
 	}
 
-	if (vd->vdev_ops->vdev_op_leaf && (zio->io_type == ZIO_TYPE_READ ||
-	    zio->io_type == ZIO_TYPE_WRITE || zio->io_type == ZIO_TYPE_TRIM)) {
+	/*
+	 * Select the next best leaf I/O to process.  Distributed spares are
+	 * excluded since they dispatch the I/O directly to a leaf vdev after
+	 * applying the dRAID mapping.
+	 */
+	if (vd->vdev_ops->vdev_op_leaf &&
+	    vd->vdev_ops != &vdev_draid_spare_ops &&
+	    (zio->io_type == ZIO_TYPE_READ ||
+	    zio->io_type == ZIO_TYPE_WRITE ||
+	    zio->io_type == ZIO_TYPE_TRIM)) {
 
 		if (zio->io_type == ZIO_TYPE_READ && vdev_cache_read(zio))
 			return (zio);
@@ -3803,8 +3821,8 @@ zio_vdev_io_done(zio_t *zio)
 	if (zio->io_delay)
 		zio->io_delay = gethrtime() - zio->io_delay;
 
-	if (vd != NULL && vd->vdev_ops->vdev_op_leaf) {
-
+	if (vd != NULL && vd->vdev_ops->vdev_op_leaf &&
+	    vd->vdev_ops != &vdev_draid_spare_ops) {
 		vdev_queue_io_done(zio);
 
 		if (zio->io_type == ZIO_TYPE_WRITE)
@@ -4206,7 +4224,7 @@ zio_checksum_verify(zio_t *zio)
 		if (zio->io_prop.zp_checksum == ZIO_CHECKSUM_OFF)
 			return (zio);
 
-		ASSERT(zio->io_prop.zp_checksum == ZIO_CHECKSUM_LABEL);
+		ASSERT3U(zio->io_prop.zp_checksum, ==, ZIO_CHECKSUM_LABEL);
 	}
 
 	if ((error = zio_checksum_error(zio, &info)) != 0) {
diff --git a/module/zfs/zio_inject.c b/module/zfs/zio_inject.c
index fb8ce0916..e56ea8868 100644
--- a/module/zfs/zio_inject.c
+++ b/module/zfs/zio_inject.c
@@ -265,6 +265,12 @@ zio_handle_fault_injection(zio_t *zio, int error)
 	if (zio->io_type != ZIO_TYPE_READ)
 		return (0);
 
+	/*
+	 * A rebuild I/O has no checksum to verify.
+	 */
+	if (zio->io_priority == ZIO_PRIORITY_REBUILD && error == ECKSUM)
+		return (0);
+
 	rw_enter(&inject_lock, RW_READER);
 
 	for (handler = list_head(&inject_handlers); handler != NULL;
author	Brian Behlendorf <[email protected]>	2020-11-13 13:51:51 -0800
committer	GitHub <[email protected]>	2020-11-13 13:51:51 -0800
commit	b2255edcc0099e62ad46a3dd9d64537663c6aee3 (patch)
tree	6cfe0d0fd30fb451396551a991d50f4bdc0cf353 /module/zfs
parent	a724db03740133c46b9a577b41a6f7221acd3e1f (diff)