Move the world out of /zfs/ and seperate out module build tree

1 files changed, 1078 insertions, 0 deletions

diff --git a/module/zfs/vdev_label.c b/module/zfs/vdev_label.c
new file mode 100644
index 000000000..bf930466f
--- /dev/null
+++ b/module/zfs/vdev_label.c
@@ -0,0 +1,1078 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
+ * Use is subject to license terms.
+ */
+
+/*
+ * Virtual Device Labels
+ * ---------------------
+ *
+ * The vdev label serves several distinct purposes:
+ *
+ *	1. Uniquely identify this device as part of a ZFS pool and confirm its
+ *	   identity within the pool.
+ *
+ * 	2. Verify that all the devices given in a configuration are present
+ *         within the pool.
+ *
+ * 	3. Determine the uberblock for the pool.
+ *
+ * 	4. In case of an import operation, determine the configuration of the
+ *         toplevel vdev of which it is a part.
+ *
+ * 	5. If an import operation cannot find all the devices in the pool,
+ *         provide enough information to the administrator to determine which
+ *         devices are missing.
+ *
+ * It is important to note that while the kernel is responsible for writing the
+ * label, it only consumes the information in the first three cases.  The
+ * latter information is only consumed in userland when determining the
+ * configuration to import a pool.
+ *
+ *
+ * Label Organization
+ * ------------------
+ *
+ * Before describing the contents of the label, it's important to understand how
+ * the labels are written and updated with respect to the uberblock.
+ *
+ * When the pool configuration is altered, either because it was newly created
+ * or a device was added, we want to update all the labels such that we can deal
+ * with fatal failure at any point.  To this end, each disk has two labels which
+ * are updated before and after the uberblock is synced.  Assuming we have
+ * labels and an uberblock with the following transaction groups:
+ *
+ *              L1          UB          L2
+ *           +------+    +------+    +------+
+ *           |      |    |      |    |      |
+ *           | t10  |    | t10  |    | t10  |
+ *           |      |    |      |    |      |
+ *           +------+    +------+    +------+
+ *
+ * In this stable state, the labels and the uberblock were all updated within
+ * the same transaction group (10).  Each label is mirrored and checksummed, so
+ * that we can detect when we fail partway through writing the label.
+ *
+ * In order to identify which labels are valid, the labels are written in the
+ * following manner:
+ *
+ * 	1. For each vdev, update 'L1' to the new label
+ * 	2. Update the uberblock
+ * 	3. For each vdev, update 'L2' to the new label
+ *
+ * Given arbitrary failure, we can determine the correct label to use based on
+ * the transaction group.  If we fail after updating L1 but before updating the
+ * UB, we will notice that L1's transaction group is greater than the uberblock,
+ * so L2 must be valid.  If we fail after writing the uberblock but before
+ * writing L2, we will notice that L2's transaction group is less than L1, and
+ * therefore L1 is valid.
+ *
+ * Another added complexity is that not every label is updated when the config
+ * is synced.  If we add a single device, we do not want to have to re-write
+ * every label for every device in the pool.  This means that both L1 and L2 may
+ * be older than the pool uberblock, because the necessary information is stored
+ * on another vdev.
+ *
+ *
+ * On-disk Format
+ * --------------
+ *
+ * The vdev label consists of two distinct parts, and is wrapped within the
+ * vdev_label_t structure.  The label includes 8k of padding to permit legacy
+ * VTOC disk labels, but is otherwise ignored.
+ *
+ * The first half of the label is a packed nvlist which contains pool wide
+ * properties, per-vdev properties, and configuration information.  It is
+ * described in more detail below.
+ *
+ * The latter half of the label consists of a redundant array of uberblocks.
+ * These uberblocks are updated whenever a transaction group is committed,
+ * or when the configuration is updated.  When a pool is loaded, we scan each
+ * vdev for the 'best' uberblock.
+ *
+ *
+ * Configuration Information
+ * -------------------------
+ *
+ * The nvlist describing the pool and vdev contains the following elements:
+ *
+ * 	version		ZFS on-disk version
+ * 	name		Pool name
+ * 	state		Pool state
+ * 	txg		Transaction group in which this label was written
+ * 	pool_guid	Unique identifier for this pool
+ * 	vdev_tree	An nvlist describing vdev tree.
+ *
+ * Each leaf device label also contains the following:
+ *
+ * 	top_guid	Unique ID for top-level vdev in which this is contained
+ * 	guid		Unique ID for the leaf vdev
+ *
+ * The 'vs' configuration follows the format described in 'spa_config.c'.
+ */
+
+#include <sys/zfs_context.h>
+#include <sys/spa.h>
+#include <sys/spa_impl.h>
+#include <sys/dmu.h>
+#include <sys/zap.h>
+#include <sys/vdev.h>
+#include <sys/vdev_impl.h>
+#include <sys/uberblock_impl.h>
+#include <sys/metaslab.h>
+#include <sys/zio.h>
+#include <sys/fs/zfs.h>
+
+/*
+ * Basic routines to read and write from a vdev label.
+ * Used throughout the rest of this file.
+ */
+uint64_t
+vdev_label_offset(uint64_t psize, int l, uint64_t offset)
+{
+	ASSERT(offset < sizeof (vdev_label_t));
+	ASSERT(P2PHASE_TYPED(psize, sizeof (vdev_label_t), uint64_t) == 0);
+
+	return (offset + l * sizeof (vdev_label_t) + (l < VDEV_LABELS / 2 ?
+	    0 : psize - VDEV_LABELS * sizeof (vdev_label_t)));
+}
+
+/*
+ * Returns back the vdev label associated with the passed in offset.
+ */
+int
+vdev_label_number(uint64_t psize, uint64_t offset)
+{
+	int l;
+
+	if (offset >= psize - VDEV_LABEL_END_SIZE) {
+		offset -= psize - VDEV_LABEL_END_SIZE;
+		offset += (VDEV_LABELS / 2) * sizeof (vdev_label_t);
+	}
+	l = offset / sizeof (vdev_label_t);
+	return (l < VDEV_LABELS ? l : -1);
+}
+
+static void
+vdev_label_read(zio_t *zio, vdev_t *vd, int l, void *buf, uint64_t offset,
+	uint64_t size, zio_done_func_t *done, void *private, int flags)
+{
+	ASSERT(spa_config_held(zio->io_spa, SCL_STATE_ALL, RW_WRITER) ==
+	    SCL_STATE_ALL);
+	ASSERT(flags & ZIO_FLAG_CONFIG_WRITER);
+
+	zio_nowait(zio_read_phys(zio, vd,
+	    vdev_label_offset(vd->vdev_psize, l, offset),
+	    size, buf, ZIO_CHECKSUM_LABEL, done, private,
+	    ZIO_PRIORITY_SYNC_READ, flags, B_TRUE));
+}
+
+static void
+vdev_label_write(zio_t *zio, vdev_t *vd, int l, void *buf, uint64_t offset,
+	uint64_t size, zio_done_func_t *done, void *private, int flags)
+{
+	ASSERT(spa_config_held(zio->io_spa, SCL_ALL, RW_WRITER) == SCL_ALL ||
+	    (spa_config_held(zio->io_spa, SCL_CONFIG | SCL_STATE, RW_READER) ==
+	    (SCL_CONFIG | SCL_STATE) &&
+	    dsl_pool_sync_context(spa_get_dsl(zio->io_spa))));
+	ASSERT(flags & ZIO_FLAG_CONFIG_WRITER);
+
+	zio_nowait(zio_write_phys(zio, vd,
+	    vdev_label_offset(vd->vdev_psize, l, offset),
+	    size, buf, ZIO_CHECKSUM_LABEL, done, private,
+	    ZIO_PRIORITY_SYNC_WRITE, flags, B_TRUE));
+}
+
+/*
+ * Generate the nvlist representing this vdev's config.
+ */
+nvlist_t *
+vdev_config_generate(spa_t *spa, vdev_t *vd, boolean_t getstats,
+    boolean_t isspare, boolean_t isl2cache)
+{
+	nvlist_t *nv = NULL;
+
+	VERIFY(nvlist_alloc(&nv, NV_UNIQUE_NAME, KM_SLEEP) == 0);
+
+	VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_TYPE,
+	    vd->vdev_ops->vdev_op_type) == 0);
+	if (!isspare && !isl2cache)
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_ID, vd->vdev_id)
+		    == 0);
+	VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_GUID, vd->vdev_guid) == 0);
+
+	if (vd->vdev_path != NULL)
+		VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_PATH,
+		    vd->vdev_path) == 0);
+
+	if (vd->vdev_devid != NULL)
+		VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_DEVID,
+		    vd->vdev_devid) == 0);
+
+	if (vd->vdev_physpath != NULL)
+		VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_PHYS_PATH,
+		    vd->vdev_physpath) == 0);
+
+	if (vd->vdev_nparity != 0) {
+		ASSERT(strcmp(vd->vdev_ops->vdev_op_type,
+		    VDEV_TYPE_RAIDZ) == 0);
+
+		/*
+		 * Make sure someone hasn't managed to sneak a fancy new vdev
+		 * into a crufty old storage pool.
+		 */
+		ASSERT(vd->vdev_nparity == 1 ||
+		    (vd->vdev_nparity == 2 &&
+		    spa_version(spa) >= SPA_VERSION_RAID6));
+
+		/*
+		 * Note that we'll add the nparity tag even on storage pools
+		 * that only support a single parity device -- older software
+		 * will just ignore it.
+		 */
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY,
+		    vd->vdev_nparity) == 0);
+	}
+
+	if (vd->vdev_wholedisk != -1ULL)
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK,
+		    vd->vdev_wholedisk) == 0);
+
+	if (vd->vdev_not_present)
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, 1) == 0);
+
+	if (vd->vdev_isspare)
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_IS_SPARE, 1) == 0);
+
+	if (!isspare && !isl2cache && vd == vd->vdev_top) {
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_METASLAB_ARRAY,
+		    vd->vdev_ms_array) == 0);
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_METASLAB_SHIFT,
+		    vd->vdev_ms_shift) == 0);
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_ASHIFT,
+		    vd->vdev_ashift) == 0);
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_ASIZE,
+		    vd->vdev_asize) == 0);
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_IS_LOG,
+		    vd->vdev_islog) == 0);
+	}
+
+	if (vd->vdev_dtl.smo_object != 0)
+		VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_DTL,
+		    vd->vdev_dtl.smo_object) == 0);
+
+	if (getstats) {
+		vdev_stat_t vs;
+		vdev_get_stats(vd, &vs);
+		VERIFY(nvlist_add_uint64_array(nv, ZPOOL_CONFIG_STATS,
+		    (uint64_t *)&vs, sizeof (vs) / sizeof (uint64_t)) == 0);
+	}
+
+	if (!vd->vdev_ops->vdev_op_leaf) {
+		nvlist_t **child;
+		int c;
+
+		child = kmem_alloc(vd->vdev_children * sizeof (nvlist_t *),
+		    KM_SLEEP);
+
+		for (c = 0; c < vd->vdev_children; c++)
+			child[c] = vdev_config_generate(spa, vd->vdev_child[c],
+			    getstats, isspare, isl2cache);
+
+		VERIFY(nvlist_add_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN,
+		    child, vd->vdev_children) == 0);
+
+		for (c = 0; c < vd->vdev_children; c++)
+			nvlist_free(child[c]);
+
+		kmem_free(child, vd->vdev_children * sizeof (nvlist_t *));
+
+	} else {
+		if (vd->vdev_offline && !vd->vdev_tmpoffline)
+			VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_OFFLINE,
+			    B_TRUE) == 0);
+		if (vd->vdev_faulted)
+			VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_FAULTED,
+			    B_TRUE) == 0);
+		if (vd->vdev_degraded)
+			VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_DEGRADED,
+			    B_TRUE) == 0);
+		if (vd->vdev_removed)
+			VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_REMOVED,
+			    B_TRUE) == 0);
+		if (vd->vdev_unspare)
+			VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_UNSPARE,
+			    B_TRUE) == 0);
+	}
+
+	return (nv);
+}
+
+nvlist_t *
+vdev_label_read_config(vdev_t *vd)
+{
+	spa_t *spa = vd->vdev_spa;
+	nvlist_t *config = NULL;
+	vdev_phys_t *vp;
+	zio_t *zio;
+	int flags =
+	    ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE;
+
+	ASSERT(spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL);
+
+	if (!vdev_readable(vd))
+		return (NULL);
+
+	vp = zio_buf_alloc(sizeof (vdev_phys_t));
+
+	for (int l = 0; l < VDEV_LABELS; l++) {
+
+		zio = zio_root(spa, NULL, NULL, flags);
+
+		vdev_label_read(zio, vd, l, vp,
+		    offsetof(vdev_label_t, vl_vdev_phys),
+		    sizeof (vdev_phys_t), NULL, NULL, flags);
+
+		if (zio_wait(zio) == 0 &&
+		    nvlist_unpack(vp->vp_nvlist, sizeof (vp->vp_nvlist),
+		    &config, 0) == 0)
+			break;
+
+		if (config != NULL) {
+			nvlist_free(config);
+			config = NULL;
+		}
+	}
+
+	zio_buf_free(vp, sizeof (vdev_phys_t));
+
+	return (config);
+}
+
+/*
+ * Determine if a device is in use.  The 'spare_guid' parameter will be filled
+ * in with the device guid if this spare is active elsewhere on the system.
+ */
+static boolean_t
+vdev_inuse(vdev_t *vd, uint64_t crtxg, vdev_labeltype_t reason,
+    uint64_t *spare_guid, uint64_t *l2cache_guid)
+{
+	spa_t *spa = vd->vdev_spa;
+	uint64_t state, pool_guid, device_guid, txg, spare_pool;
+	uint64_t vdtxg = 0;
+	nvlist_t *label;
+
+	if (spare_guid)
+		*spare_guid = 0ULL;
+	if (l2cache_guid)
+		*l2cache_guid = 0ULL;
+
+	/*
+	 * Read the label, if any, and perform some basic sanity checks.
+	 */
+	if ((label = vdev_label_read_config(vd)) == NULL)
+		return (B_FALSE);
+
+	(void) nvlist_lookup_uint64(label, ZPOOL_CONFIG_CREATE_TXG,
+	    &vdtxg);
+
+	if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_STATE,
+	    &state) != 0 ||
+	    nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID,
+	    &device_guid) != 0) {
+		nvlist_free(label);
+		return (B_FALSE);
+	}
+
+	if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE &&
+	    (nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_GUID,
+	    &pool_guid) != 0 ||
+	    nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_TXG,
+	    &txg) != 0)) {
+		nvlist_free(label);
+		return (B_FALSE);
+	}
+
+	nvlist_free(label);
+
+	/*
+	 * Check to see if this device indeed belongs to the pool it claims to
+	 * be a part of.  The only way this is allowed is if the device is a hot
+	 * spare (which we check for later on).
+	 */
+	if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE &&
+	    !spa_guid_exists(pool_guid, device_guid) &&
+	    !spa_spare_exists(device_guid, NULL, NULL) &&
+	    !spa_l2cache_exists(device_guid, NULL))
+		return (B_FALSE);
+
+	/*
+	 * If the transaction group is zero, then this an initialized (but
+	 * unused) label.  This is only an error if the create transaction
+	 * on-disk is the same as the one we're using now, in which case the
+	 * user has attempted to add the same vdev multiple times in the same
+	 * transaction.
+	 */
+	if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE &&
+	    txg == 0 && vdtxg == crtxg)
+		return (B_TRUE);
+
+	/*
+	 * Check to see if this is a spare device.  We do an explicit check for
+	 * spa_has_spare() here because it may be on our pending list of spares
+	 * to add.  We also check if it is an l2cache device.
+	 */
+	if (spa_spare_exists(device_guid, &spare_pool, NULL) ||
+	    spa_has_spare(spa, device_guid)) {
+		if (spare_guid)
+			*spare_guid = device_guid;
+
+		switch (reason) {
+		case VDEV_LABEL_CREATE:
+		case VDEV_LABEL_L2CACHE:
+			return (B_TRUE);
+
+		case VDEV_LABEL_REPLACE:
+			return (!spa_has_spare(spa, device_guid) ||
+			    spare_pool != 0ULL);
+
+		case VDEV_LABEL_SPARE:
+			return (spa_has_spare(spa, device_guid));
+		}
+	}
+
+	/*
+	 * Check to see if this is an l2cache device.
+	 */
+	if (spa_l2cache_exists(device_guid, NULL))
+		return (B_TRUE);
+
+	/*
+	 * If the device is marked ACTIVE, then this device is in use by another
+	 * pool on the system.
+	 */
+	return (state == POOL_STATE_ACTIVE);
+}
+
+/*
+ * Initialize a vdev label.  We check to make sure each leaf device is not in
+ * use, and writable.  We put down an initial label which we will later
+ * overwrite with a complete label.  Note that it's important to do this
+ * sequentially, not in parallel, so that we catch cases of multiple use of the
+ * same leaf vdev in the vdev we're creating -- e.g. mirroring a disk with
+ * itself.
+ */
+int
+vdev_label_init(vdev_t *vd, uint64_t crtxg, vdev_labeltype_t reason)
+{
+	spa_t *spa = vd->vdev_spa;
+	nvlist_t *label;
+	vdev_phys_t *vp;
+	vdev_boot_header_t *vb;
+	uberblock_t *ub;
+	zio_t *zio;
+	char *buf;
+	size_t buflen;
+	int error;
+	uint64_t spare_guid, l2cache_guid;
+	int flags = ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL;
+
+	ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL);
+
+	for (int c = 0; c < vd->vdev_children; c++)
+		if ((error = vdev_label_init(vd->vdev_child[c],
+		    crtxg, reason)) != 0)
+			return (error);
+
+	if (!vd->vdev_ops->vdev_op_leaf)
+		return (0);
+
+	/*
+	 * Dead vdevs cannot be initialized.
+	 */
+	if (vdev_is_dead(vd))
+		return (EIO);
+
+	/*
+	 * Determine if the vdev is in use.
+	 */
+	if (reason != VDEV_LABEL_REMOVE &&
+	    vdev_inuse(vd, crtxg, reason, &spare_guid, &l2cache_guid))
+		return (EBUSY);
+
+	ASSERT(reason != VDEV_LABEL_REMOVE ||
+	    vdev_inuse(vd, crtxg, reason, NULL, NULL));
+
+	/*
+	 * If this is a request to add or replace a spare or l2cache device
+	 * that is in use elsewhere on the system, then we must update the
+	 * guid (which was initialized to a random value) to reflect the
+	 * actual GUID (which is shared between multiple pools).
+	 */
+	if (reason != VDEV_LABEL_REMOVE && reason != VDEV_LABEL_L2CACHE &&
+	    spare_guid != 0ULL) {
+		uint64_t guid_delta = spare_guid - vd->vdev_guid;
+
+		vd->vdev_guid += guid_delta;
+
+		for (vdev_t *pvd = vd; pvd != NULL; pvd = pvd->vdev_parent)
+			pvd->vdev_guid_sum += guid_delta;
+
+		/*
+		 * If this is a replacement, then we want to fallthrough to the
+		 * rest of the code.  If we're adding a spare, then it's already
+		 * labeled appropriately and we can just return.
+		 */
+		if (reason == VDEV_LABEL_SPARE)
+			return (0);
+		ASSERT(reason == VDEV_LABEL_REPLACE);
+	}
+
+	if (reason != VDEV_LABEL_REMOVE && reason != VDEV_LABEL_SPARE &&
+	    l2cache_guid != 0ULL) {
+		uint64_t guid_delta = l2cache_guid - vd->vdev_guid;
+
+		vd->vdev_guid += guid_delta;
+
+		for (vdev_t *pvd = vd; pvd != NULL; pvd = pvd->vdev_parent)
+			pvd->vdev_guid_sum += guid_delta;
+
+		/*
+		 * If this is a replacement, then we want to fallthrough to the
+		 * rest of the code.  If we're adding an l2cache, then it's
+		 * already labeled appropriately and we can just return.
+		 */
+		if (reason == VDEV_LABEL_L2CACHE)
+			return (0);
+		ASSERT(reason == VDEV_LABEL_REPLACE);
+	}
+
+	/*
+	 * Initialize its label.
+	 */
+	vp = zio_buf_alloc(sizeof (vdev_phys_t));
+	bzero(vp, sizeof (vdev_phys_t));
+
+	/*
+	 * Generate a label describing the pool and our top-level vdev.
+	 * We mark it as being from txg 0 to indicate that it's not
+	 * really part of an active pool just yet.  The labels will
+	 * be written again with a meaningful txg by spa_sync().
+	 */
+	if (reason == VDEV_LABEL_SPARE ||
+	    (reason == VDEV_LABEL_REMOVE && vd->vdev_isspare)) {
+		/*
+		 * For inactive hot spares, we generate a special label that
+		 * identifies as a mutually shared hot spare.  We write the
+		 * label if we are adding a hot spare, or if we are removing an
+		 * active hot spare (in which case we want to revert the
+		 * labels).
+		 */
+		VERIFY(nvlist_alloc(&label, NV_UNIQUE_NAME, KM_SLEEP) == 0);
+
+		VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_VERSION,
+		    spa_version(spa)) == 0);
+		VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_POOL_STATE,
+		    POOL_STATE_SPARE) == 0);
+		VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_GUID,
+		    vd->vdev_guid) == 0);
+	} else if (reason == VDEV_LABEL_L2CACHE ||
+	    (reason == VDEV_LABEL_REMOVE && vd->vdev_isl2cache)) {
+		/*
+		 * For level 2 ARC devices, add a special label.
+		 */
+		VERIFY(nvlist_alloc(&label, NV_UNIQUE_NAME, KM_SLEEP) == 0);
+
+		VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_VERSION,
+		    spa_version(spa)) == 0);
+		VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_POOL_STATE,
+		    POOL_STATE_L2CACHE) == 0);
+		VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_GUID,
+		    vd->vdev_guid) == 0);
+	} else {
+		label = spa_config_generate(spa, vd, 0ULL, B_FALSE);
+
+		/*
+		 * Add our creation time.  This allows us to detect multiple
+		 * vdev uses as described above, and automatically expires if we
+		 * fail.
+		 */
+		VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_CREATE_TXG,
+		    crtxg) == 0);
+	}
+
+	buf = vp->vp_nvlist;
+	buflen = sizeof (vp->vp_nvlist);
+
+	error = nvlist_pack(label, &buf, &buflen, NV_ENCODE_XDR, KM_SLEEP);
+	if (error != 0) {
+		nvlist_free(label);
+		zio_buf_free(vp, sizeof (vdev_phys_t));
+		/* EFAULT means nvlist_pack ran out of room */
+		return (error == EFAULT ? ENAMETOOLONG : EINVAL);
+	}
+
+	/*
+	 * Initialize boot block header.
+	 */
+	vb = zio_buf_alloc(sizeof (vdev_boot_header_t));
+	bzero(vb, sizeof (vdev_boot_header_t));
+	vb->vb_magic = VDEV_BOOT_MAGIC;
+	vb->vb_version = VDEV_BOOT_VERSION;
+	vb->vb_offset = VDEV_BOOT_OFFSET;
+	vb->vb_size = VDEV_BOOT_SIZE;
+
+	/*
+	 * Initialize uberblock template.
+	 */
+	ub = zio_buf_alloc(VDEV_UBERBLOCK_SIZE(vd));
+	bzero(ub, VDEV_UBERBLOCK_SIZE(vd));
+	*ub = spa->spa_uberblock;
+	ub->ub_txg = 0;
+
+	/*
+	 * Write everything in parallel.
+	 */
+	zio = zio_root(spa, NULL, NULL, flags);
+
+	for (int l = 0; l < VDEV_LABELS; l++) {
+
+		vdev_label_write(zio, vd, l, vp,
+		    offsetof(vdev_label_t, vl_vdev_phys),
+		    sizeof (vdev_phys_t), NULL, NULL, flags);
+
+		vdev_label_write(zio, vd, l, vb,
+		    offsetof(vdev_label_t, vl_boot_header),
+		    sizeof (vdev_boot_header_t), NULL, NULL, flags);
+
+		for (int n = 0; n < VDEV_UBERBLOCK_COUNT(vd); n++) {
+			vdev_label_write(zio, vd, l, ub,
+			    VDEV_UBERBLOCK_OFFSET(vd, n),
+			    VDEV_UBERBLOCK_SIZE(vd), NULL, NULL, flags);
+		}
+	}
+
+	error = zio_wait(zio);
+
+	nvlist_free(label);
+	zio_buf_free(ub, VDEV_UBERBLOCK_SIZE(vd));
+	zio_buf_free(vb, sizeof (vdev_boot_header_t));
+	zio_buf_free(vp, sizeof (vdev_phys_t));
+
+	/*
+	 * If this vdev hasn't been previously identified as a spare, then we
+	 * mark it as such only if a) we are labeling it as a spare, or b) it
+	 * exists as a spare elsewhere in the system.  Do the same for
+	 * level 2 ARC devices.
+	 */
+	if (error == 0 && !vd->vdev_isspare &&
+	    (reason == VDEV_LABEL_SPARE ||
+	    spa_spare_exists(vd->vdev_guid, NULL, NULL)))
+		spa_spare_add(vd);
+
+	if (error == 0 && !vd->vdev_isl2cache &&
+	    (reason == VDEV_LABEL_L2CACHE ||
+	    spa_l2cache_exists(vd->vdev_guid, NULL)))
+		spa_l2cache_add(vd);
+
+	return (error);
+}
+
+/*
+ * ==========================================================================
+ * uberblock load/sync
+ * ==========================================================================
+ */
+
+/*
+ * Consider the following situation: txg is safely synced to disk.  We've
+ * written the first uberblock for txg + 1, and then we lose power.  When we
+ * come back up, we fail to see the uberblock for txg + 1 because, say,
+ * it was on a mirrored device and the replica to which we wrote txg + 1
+ * is now offline.  If we then make some changes and sync txg + 1, and then
+ * the missing replica comes back, then for a new seconds we'll have two
+ * conflicting uberblocks on disk with the same txg.  The solution is simple:
+ * among uberblocks with equal txg, choose the one with the latest timestamp.
+ */
+static int
+vdev_uberblock_compare(uberblock_t *ub1, uberblock_t *ub2)
+{
+	if (ub1->ub_txg < ub2->ub_txg)
+		return (-1);
+	if (ub1->ub_txg > ub2->ub_txg)
+		return (1);
+
+	if (ub1->ub_timestamp < ub2->ub_timestamp)
+		return (-1);
+	if (ub1->ub_timestamp > ub2->ub_timestamp)
+		return (1);
+
+	return (0);
+}
+
+static void
+vdev_uberblock_load_done(zio_t *zio)
+{
+	zio_t *rio = zio->io_private;
+	uberblock_t *ub = zio->io_data;
+	uberblock_t *ubbest = rio->io_private;
+
+	ASSERT3U(zio->io_size, ==, VDEV_UBERBLOCK_SIZE(zio->io_vd));
+
+	if (zio->io_error == 0 && uberblock_verify(ub) == 0) {
+		mutex_enter(&rio->io_lock);
+		if (vdev_uberblock_compare(ub, ubbest) > 0)
+			*ubbest = *ub;
+		mutex_exit(&rio->io_lock);
+	}
+
+	zio_buf_free(zio->io_data, zio->io_size);
+}
+
+void
+vdev_uberblock_load(zio_t *zio, vdev_t *vd, uberblock_t *ubbest)
+{
+	spa_t *spa = vd->vdev_spa;
+	vdev_t *rvd = spa->spa_root_vdev;
+	int flags =
+	    ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE;
+
+	if (vd == rvd) {
+		ASSERT(zio == NULL);
+		spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
+		zio = zio_root(spa, NULL, ubbest, flags);
+		bzero(ubbest, sizeof (uberblock_t));
+	}
+
+	ASSERT(zio != NULL);
+
+	for (int c = 0; c < vd->vdev_children; c++)
+		vdev_uberblock_load(zio, vd->vdev_child[c], ubbest);
+
+	if (vd->vdev_ops->vdev_op_leaf && vdev_readable(vd)) {
+		for (int l = 0; l < VDEV_LABELS; l++) {
+			for (int n = 0; n < VDEV_UBERBLOCK_COUNT(vd); n++) {
+				vdev_label_read(zio, vd, l,
+				    zio_buf_alloc(VDEV_UBERBLOCK_SIZE(vd)),
+				    VDEV_UBERBLOCK_OFFSET(vd, n),
+				    VDEV_UBERBLOCK_SIZE(vd),
+				    vdev_uberblock_load_done, zio, flags);
+			}
+		}
+	}
+
+	if (vd == rvd) {
+		(void) zio_wait(zio);
+		spa_config_exit(spa, SCL_ALL, FTAG);
+	}
+}
+
+/*
+ * On success, increment root zio's count of good writes.
+ * We only get credit for writes to known-visible vdevs; see spa_vdev_add().
+ */
+static void
+vdev_uberblock_sync_done(zio_t *zio)
+{
+	uint64_t *good_writes = zio->io_private;
+
+	if (zio->io_error == 0 && zio->io_vd->vdev_top->vdev_ms_array != 0)
+		atomic_add_64(good_writes, 1);
+}
+
+/*
+ * Write the uberblock to all labels of all leaves of the specified vdev.
+ */
+static void
+vdev_uberblock_sync(zio_t *zio, uberblock_t *ub, vdev_t *vd, int flags)
+{
+	uberblock_t *ubbuf;
+	int n;
+
+	for (int c = 0; c < vd->vdev_children; c++)
+		vdev_uberblock_sync(zio, ub, vd->vdev_child[c], flags);
+
+	if (!vd->vdev_ops->vdev_op_leaf)
+		return;
+
+	if (!vdev_writeable(vd))
+		return;
+
+	n = ub->ub_txg & (VDEV_UBERBLOCK_COUNT(vd) - 1);
+
+	ubbuf = zio_buf_alloc(VDEV_UBERBLOCK_SIZE(vd));
+	bzero(ubbuf, VDEV_UBERBLOCK_SIZE(vd));
+	*ubbuf = *ub;
+
+	for (int l = 0; l < VDEV_LABELS; l++)
+		vdev_label_write(zio, vd, l, ubbuf,
+		    VDEV_UBERBLOCK_OFFSET(vd, n), VDEV_UBERBLOCK_SIZE(vd),
+		    vdev_uberblock_sync_done, zio->io_private,
+		    flags | ZIO_FLAG_DONT_PROPAGATE);
+
+	zio_buf_free(ubbuf, VDEV_UBERBLOCK_SIZE(vd));
+}
+
+int
+vdev_uberblock_sync_list(vdev_t **svd, int svdcount, uberblock_t *ub, int flags)
+{
+	spa_t *spa = svd[0]->vdev_spa;
+	zio_t *zio;
+	uint64_t good_writes = 0;
+
+	zio = zio_root(spa, NULL, &good_writes, flags);
+
+	for (int v = 0; v < svdcount; v++)
+		vdev_uberblock_sync(zio, ub, svd[v], flags);
+
+	(void) zio_wait(zio);
+
+	/*
+	 * Flush the uberblocks to disk.  This ensures that the odd labels
+	 * are no longer needed (because the new uberblocks and the even
+	 * labels are safely on disk), so it is safe to overwrite them.
+	 */
+	zio = zio_root(spa, NULL, NULL, flags);
+
+	for (int v = 0; v < svdcount; v++)
+		zio_flush(zio, svd[v]);
+
+	(void) zio_wait(zio);
+
+	return (good_writes >= 1 ? 0 : EIO);
+}
+
+/*
+ * On success, increment the count of good writes for our top-level vdev.
+ */
+static void
+vdev_label_sync_done(zio_t *zio)
+{
+	uint64_t *good_writes = zio->io_private;
+
+	if (zio->io_error == 0)
+		atomic_add_64(good_writes, 1);
+}
+
+/*
+ * If there weren't enough good writes, indicate failure to the parent.
+ */
+static void
+vdev_label_sync_top_done(zio_t *zio)
+{
+	uint64_t *good_writes = zio->io_private;
+
+	if (*good_writes == 0)
+		zio->io_error = EIO;
+
+	kmem_free(good_writes, sizeof (uint64_t));
+}
+
+/*
+ * We ignore errors for log and cache devices, simply free the private data.
+ */
+static void
+vdev_label_sync_ignore_done(zio_t *zio)
+{
+	kmem_free(zio->io_private, sizeof (uint64_t));
+}
+
+/*
+ * Write all even or odd labels to all leaves of the specified vdev.
+ */
+static void
+vdev_label_sync(zio_t *zio, vdev_t *vd, int l, uint64_t txg, int flags)
+{
+	nvlist_t *label;
+	vdev_phys_t *vp;
+	char *buf;
+	size_t buflen;
+
+	for (int c = 0; c < vd->vdev_children; c++)
+		vdev_label_sync(zio, vd->vdev_child[c], l, txg, flags);
+
+	if (!vd->vdev_ops->vdev_op_leaf)
+		return;
+
+	if (!vdev_writeable(vd))
+		return;
+
+	/*
+	 * Generate a label describing the top-level config to which we belong.
+	 */
+	label = spa_config_generate(vd->vdev_spa, vd, txg, B_FALSE);
+
+	vp = zio_buf_alloc(sizeof (vdev_phys_t));
+	bzero(vp, sizeof (vdev_phys_t));
+
+	buf = vp->vp_nvlist;
+	buflen = sizeof (vp->vp_nvlist);
+
+	if (nvlist_pack(label, &buf, &buflen, NV_ENCODE_XDR, KM_SLEEP) == 0) {
+		for (; l < VDEV_LABELS; l += 2) {
+			vdev_label_write(zio, vd, l, vp,
+			    offsetof(vdev_label_t, vl_vdev_phys),
+			    sizeof (vdev_phys_t),
+			    vdev_label_sync_done, zio->io_private,
+			    flags | ZIO_FLAG_DONT_PROPAGATE);
+		}
+	}
+
+	zio_buf_free(vp, sizeof (vdev_phys_t));
+	nvlist_free(label);
+}
+
+int
+vdev_label_sync_list(spa_t *spa, int l, uint64_t txg, int flags)
+{
+	list_t *dl = &spa->spa_config_dirty_list;
+	vdev_t *vd;
+	zio_t *zio;
+	int error;
+
+	/*
+	 * Write the new labels to disk.
+	 */
+	zio = zio_root(spa, NULL, NULL, flags);
+
+	for (vd = list_head(dl); vd != NULL; vd = list_next(dl, vd)) {
+		uint64_t *good_writes = kmem_zalloc(sizeof (uint64_t),
+		    KM_SLEEP);
+		zio_t *vio = zio_null(zio, spa,
+		    (vd->vdev_islog || vd->vdev_aux != NULL) ?
+		    vdev_label_sync_ignore_done : vdev_label_sync_top_done,
+		    good_writes, flags);
+		vdev_label_sync(vio, vd, l, txg, flags);
+		zio_nowait(vio);
+	}
+
+	error = zio_wait(zio);
+
+	/*
+	 * Flush the new labels to disk.
+	 */
+	zio = zio_root(spa, NULL, NULL, flags);
+
+	for (vd = list_head(dl); vd != NULL; vd = list_next(dl, vd))
+		zio_flush(zio, vd);
+
+	(void) zio_wait(zio);
+
+	return (error);
+}
+
+/*
+ * Sync the uberblock and any changes to the vdev configuration.
+ *
+ * The order of operations is carefully crafted to ensure that
+ * if the system panics or loses power at any time, the state on disk
+ * is still transactionally consistent.  The in-line comments below
+ * describe the failure semantics at each stage.
+ *
+ * Moreover, vdev_config_sync() is designed to be idempotent: if it fails
+ * at any time, you can just call it again, and it will resume its work.
+ */
+int
+vdev_config_sync(vdev_t **svd, int svdcount, uint64_t txg)
+{
+	spa_t *spa = svd[0]->vdev_spa;
+	uberblock_t *ub = &spa->spa_uberblock;
+	vdev_t *vd;
+	zio_t *zio;
+	int error;
+	int flags = ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL;
+
+	ASSERT(ub->ub_txg <= txg);
+
+	/*
+	 * If this isn't a resync due to I/O errors,
+	 * and nothing changed in this transaction group,
+	 * and the vdev configuration hasn't changed,
+	 * then there's nothing to do.
+	 */
+	if (ub->ub_txg < txg &&
+	    uberblock_update(ub, spa->spa_root_vdev, txg) == B_FALSE &&
+	    list_is_empty(&spa->spa_config_dirty_list))
+		return (0);
+
+	if (txg > spa_freeze_txg(spa))
+		return (0);
+
+	ASSERT(txg <= spa->spa_final_txg);
+
+	/*
+	 * Flush the write cache of every disk that's been written to
+	 * in this transaction group.  This ensures that all blocks
+	 * written in this txg will be committed to stable storage
+	 * before any uberblock that references them.
+	 */
+	zio = zio_root(spa, NULL, NULL, flags);
+
+	for (vd = txg_list_head(&spa->spa_vdev_txg_list, TXG_CLEAN(txg)); vd;
+	    vd = txg_list_next(&spa->spa_vdev_txg_list, vd, TXG_CLEAN(txg)))
+		zio_flush(zio, vd);
+
+	(void) zio_wait(zio);
+
+	/*
+	 * Sync out the even labels (L0, L2) for every dirty vdev.  If the
+	 * system dies in the middle of this process, that's OK: all of the
+	 * even labels that made it to disk will be newer than any uberblock,
+	 * and will therefore be considered invalid.  The odd labels (L1, L3),
+	 * which have not yet been touched, will still be valid.  We flush
+	 * the new labels to disk to ensure that all even-label updates
+	 * are committed to stable storage before the uberblock update.
+	 */
+	if ((error = vdev_label_sync_list(spa, 0, txg, flags)) != 0)
+		return (error);
+
+	/*
+	 * Sync the uberblocks to all vdevs in svd[].
+	 * If the system dies in the middle of this step, there are two cases
+	 * to consider, and the on-disk state is consistent either way:
+	 *
+	 * (1)	If none of the new uberblocks made it to disk, then the
+	 *	previous uberblock will be the newest, and the odd labels
+	 *	(which had not yet been touched) will be valid with respect
+	 *	to that uberblock.
+	 *
+	 * (2)	If one or more new uberblocks made it to disk, then they
+	 *	will be the newest, and the even labels (which had all
+	 *	been successfully committed) will be valid with respect
+	 *	to the new uberblocks.
+	 */
+	if ((error = vdev_uberblock_sync_list(svd, svdcount, ub, flags)) != 0)
+		return (error);
+
+	/*
+	 * Sync out odd labels for every dirty vdev.  If the system dies
+	 * in the middle of this process, the even labels and the new
+	 * uberblocks will suffice to open the pool.  The next time
+	 * the pool is opened, the first thing we'll do -- before any
+	 * user data is modified -- is mark every vdev dirty so that
+	 * all labels will be brought up to date.  We flush the new labels
+	 * to disk to ensure that all odd-label updates are committed to
+	 * stable storage before the next transaction group begins.
+	 */
+	return (vdev_label_sync_list(spa, 1, txg, flags));
+}