Fix sync behavior for disk vdevs

Prior to b39c22b, which was first generally available in the 0.6.5
release as b39c22b, ZoL never actually submitted synchronous read or write
requests to the Linux block layer.  This means the vdev_disk_dio_is_sync()
function had always returned false and, therefore, the completion in
dio_request_t.dr_comp was never actually used.

In b39c22b, synchronous ZIO operations were translated to synchronous
BIO requests in vdev_disk_io_start().  The follow-on commits 5592404 and
aa159af fixed several problems introduced by b39c22b.  In particular,
5592404 introduced the new flag parameter "wait" to __vdev_disk_physio()
but under ZoL, since vdev_disk_physio() is never actually used, the wait
flag was always zero so the new code had no effect other than to cause
a bug in the use of the dio_request_t.dr_comp which was fixed by aa159af.

The original rationale for introducing synchronous operations in b39c22b
was to hurry certains requests through the BIO layer which would have
otherwise been subject to its unplug timer which would increase the
latency.  This behavior of the unplug timer, however, went away during the
transition of the plug/unplug system between kernels 2.6.32 and 2.6.39.

To handle the unplug timer behavior on 2.6.32-2.6.35 kernels the
BIO_RW_UNPLUG flag is used as a hint to suppress the plugging behavior.

For kernels 2.6.36-2.6.38, the REQ_UNPLUG macro will be available and
ise used for the same purpose.

Signed-off-by: Tim Chase <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>
Closes #4858

1 files changed, 21 insertions, 37 deletions

diff --git a/module/zfs/vdev_disk.c b/module/zfs/vdev_disk.c
index 2f06e721b..5ec19870c 100644
--- a/module/zfs/vdev_disk.c
+++ b/module/zfs/vdev_disk.c
@@ -41,10 +41,8 @@ static void *zfs_vdev_holder = VDEV_HOLDER;
  * Virtual device vector for disks.
  */
 typedef struct dio_request {
-	struct completion	dr_comp;	/* Completion for sync IO */
 	zio_t			*dr_zio;	/* Parent ZIO */
 	atomic_t		dr_ref;		/* References */
-	int			dr_wait;	/* Wait for IO */
 	int			dr_error;	/* Bio error */
 	int			dr_bio_count;	/* Count of bio's */
 	struct bio		*dr_bio[0];	/* Attached bio's */
@@ -363,7 +361,6 @@ vdev_disk_dio_alloc(int bio_count)
 	dr = kmem_zalloc(sizeof (dio_request_t) +
 	    sizeof (struct bio *) * bio_count, KM_SLEEP);
 	if (dr) {
-		init_completion(&dr->dr_comp);
 		atomic_set(&dr->dr_ref, 0);
 		dr->dr_bio_count = bio_count;
 		dr->dr_error = 0;
@@ -426,7 +423,6 @@ BIO_END_IO_PROTO(vdev_disk_physio_completion, bio, error)
 {
 	dio_request_t *dr = bio->bi_private;
 	int rc;
-	int wait;
 
 	if (dr->dr_error == 0) {
 #ifdef HAVE_1ARG_BIO_END_IO_T
@@ -439,13 +435,8 @@ BIO_END_IO_PROTO(vdev_disk_physio_completion, bio, error)
 #endif
 	}
 
-	wait = dr->dr_wait;
 	/* Drop reference aquired by __vdev_disk_physio */
 	rc = vdev_disk_dio_put(dr);
-
-	/* Wake up synchronous waiter this is the last outstanding bio */
-	if (wait && rc == 1)
-		complete(&dr->dr_comp);
 }
 
 static inline unsigned long
@@ -527,7 +518,7 @@ vdev_submit_bio(struct bio *bio)
 
 static int
 __vdev_disk_physio(struct block_device *bdev, zio_t *zio, caddr_t kbuf_ptr,
-    size_t kbuf_size, uint64_t kbuf_offset, int rw, int flags, int wait)
+    size_t kbuf_size, uint64_t kbuf_offset, int rw, int flags)
 {
 	dio_request_t *dr;
 	caddr_t bio_ptr;
@@ -546,7 +537,6 @@ retry:
 		bio_set_flags_failfast(bdev, &flags);
 
 	dr->dr_zio = zio;
-	dr->dr_wait = wait;
 
 	/*
 	 * When the IO size exceeds the maximum bio size for the request
@@ -610,33 +600,20 @@ retry:
 		if (dr->dr_bio[i])
 			vdev_submit_bio(dr->dr_bio[i]);
 
-	/*
-	 * On synchronous blocking requests we wait for all bio the completion
-	 * callbacks to run.  We will be woken when the last callback runs
-	 * for this dio.  We are responsible for putting the last dio_request
-	 * reference will in turn put back the last bio references.  The
-	 * only synchronous consumer is vdev_disk_read_rootlabel() all other
-	 * IO originating from vdev_disk_io_start() is asynchronous.
-	 */
-	if (wait) {
-		wait_for_completion(&dr->dr_comp);
-		error = dr->dr_error;
-		ASSERT3S(atomic_read(&dr->dr_ref), ==, 1);
-	}
-
 	(void) vdev_disk_dio_put(dr);
 
 	return (error);
 }
 
+#ifndef __linux__
 int
 vdev_disk_physio(struct block_device *bdev, caddr_t kbuf,
     size_t size, uint64_t offset, int rw, int flags)
 {
 	bio_set_flags_failfast(bdev, &flags);
-	return (__vdev_disk_physio(bdev, NULL, kbuf, size, offset, rw, flags,
-	    1));
+	return (__vdev_disk_physio(bdev, NULL, kbuf, size, offset, rw, flags));
 }
+#endif
 
 BIO_END_IO_PROTO(vdev_disk_io_flush_completion, bio, rc)
 {
@@ -688,7 +665,6 @@ vdev_disk_io_start(zio_t *zio)
 {
 	vdev_t *v = zio->io_vd;
 	vdev_disk_t *vd = v->vdev_tsd;
-	zio_priority_t pri = zio->io_priority;
 	int rw, flags, error;
 
 	switch (zio->io_type) {
@@ -729,18 +705,24 @@ vdev_disk_io_start(zio_t *zio)
 		return;
 	case ZIO_TYPE_WRITE:
 		rw = WRITE;
-		if ((pri == ZIO_PRIORITY_SYNC_WRITE) && (v->vdev_nonrot))
-			flags = WRITE_SYNC;
-		else
-			flags = 0;
+#if defined(HAVE_BLK_QUEUE_HAVE_BIO_RW_UNPLUG)
+		flags = (1 << BIO_RW_UNPLUG);
+#elif defined(REQ_UNPLUG)
+		flags = REQ_UNPLUG;
+#else
+		flags = 0;
+#endif
 		break;
 
 	case ZIO_TYPE_READ:
 		rw = READ;
-		if ((pri == ZIO_PRIORITY_SYNC_READ) && (v->vdev_nonrot))
-			flags = READ_SYNC;
-		else
-			flags = 0;
+#if defined(HAVE_BLK_QUEUE_HAVE_BIO_RW_UNPLUG)
+		flags = (1 << BIO_RW_UNPLUG);
+#elif defined(REQ_UNPLUG)
+		flags = REQ_UNPLUG;
+#else
+		flags = 0;
+#endif
 		break;
 
 	default:
@@ -750,7 +732,7 @@ vdev_disk_io_start(zio_t *zio)
 	}
 
 	error = __vdev_disk_physio(vd->vd_bdev, zio, zio->io_data,
-	    zio->io_size, zio->io_offset, rw, flags, 0);
+	    zio->io_size, zio->io_offset, rw, flags);
 	if (error) {
 		zio->io_error = error;
 		zio_interrupt(zio);
@@ -820,6 +802,7 @@ vdev_ops_t vdev_disk_ops = {
 	B_TRUE			/* leaf vdev */
 };
 
+#ifndef __linux__
 /*
  * Given the root disk device devid or pathname, read the label from
  * the device, and construct a configuration nvlist.
@@ -883,6 +866,7 @@ vdev_disk_read_rootlabel(char *devpath, char *devid, nvlist_t **config)
 
 	return (0);
 }
+#endif	/* __linux__ */
 
 module_param(zfs_vdev_scheduler, charp, 0644);
 MODULE_PARM_DESC(zfs_vdev_scheduler, "I/O scheduler");