diff options
author | Brian Behlendorf <[email protected]> | 2008-12-11 11:08:09 -0800 |
---|---|---|
committer | Brian Behlendorf <[email protected]> | 2008-12-11 11:08:09 -0800 |
commit | 172bb4bd5e4afef721dd4d2972d8680d983f144b (patch) | |
tree | 18ab1e97e5e409150066c529b5a981ecf600ef80 /module/zfs/dmu_zfetch.c | |
parent | 9e8b1e836caa454586797f771a7ad1817ebae315 (diff) |
Move the world out of /zfs/ and seperate out module build tree
Diffstat (limited to 'module/zfs/dmu_zfetch.c')
-rw-r--r-- | module/zfs/dmu_zfetch.c | 651 |
1 files changed, 651 insertions, 0 deletions
diff --git a/module/zfs/dmu_zfetch.c b/module/zfs/dmu_zfetch.c new file mode 100644 index 000000000..4d79fe98e --- /dev/null +++ b/module/zfs/dmu_zfetch.c @@ -0,0 +1,651 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License (the "License"). + * You may not use this file except in compliance with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ +/* + * Copyright 2006 Sun Microsystems, Inc. All rights reserved. + * Use is subject to license terms. + */ + +#pragma ident "%Z%%M% %I% %E% SMI" + +#include <sys/zfs_context.h> +#include <sys/dnode.h> +#include <sys/dmu_objset.h> +#include <sys/dmu_zfetch.h> +#include <sys/dmu.h> +#include <sys/dbuf.h> + +/* + * I'm against tune-ables, but these should probably exist as tweakable globals + * until we can get this working the way we want it to. + */ + +int zfs_prefetch_disable = 0; + +/* max # of streams per zfetch */ +uint32_t zfetch_max_streams = 8; +/* min time before stream reclaim */ +uint32_t zfetch_min_sec_reap = 2; +/* max number of blocks to fetch at a time */ +uint32_t zfetch_block_cap = 256; +/* number of bytes in a array_read at which we stop prefetching (1Mb) */ +uint64_t zfetch_array_rd_sz = 1024 * 1024; + +/* forward decls for static routines */ +static int dmu_zfetch_colinear(zfetch_t *, zstream_t *); +static void dmu_zfetch_dofetch(zfetch_t *, zstream_t *); +static uint64_t dmu_zfetch_fetch(dnode_t *, uint64_t, uint64_t); +static uint64_t dmu_zfetch_fetchsz(dnode_t *, uint64_t, uint64_t); +static int dmu_zfetch_find(zfetch_t *, zstream_t *, int); +static int dmu_zfetch_stream_insert(zfetch_t *, zstream_t *); +static zstream_t *dmu_zfetch_stream_reclaim(zfetch_t *); +static void dmu_zfetch_stream_remove(zfetch_t *, zstream_t *); +static int dmu_zfetch_streams_equal(zstream_t *, zstream_t *); + +/* + * Given a zfetch structure and a zstream structure, determine whether the + * blocks to be read are part of a co-linear pair of existing prefetch + * streams. If a set is found, coalesce the streams, removing one, and + * configure the prefetch so it looks for a strided access pattern. + * + * In other words: if we find two sequential access streams that are + * the same length and distance N appart, and this read is N from the + * last stream, then we are probably in a strided access pattern. So + * combine the two sequential streams into a single strided stream. + * + * If no co-linear streams are found, return NULL. + */ +static int +dmu_zfetch_colinear(zfetch_t *zf, zstream_t *zh) +{ + zstream_t *z_walk; + zstream_t *z_comp; + + if (! rw_tryenter(&zf->zf_rwlock, RW_WRITER)) + return (0); + + if (zh == NULL) { + rw_exit(&zf->zf_rwlock); + return (0); + } + + for (z_walk = list_head(&zf->zf_stream); z_walk; + z_walk = list_next(&zf->zf_stream, z_walk)) { + for (z_comp = list_next(&zf->zf_stream, z_walk); z_comp; + z_comp = list_next(&zf->zf_stream, z_comp)) { + int64_t diff; + + if (z_walk->zst_len != z_walk->zst_stride || + z_comp->zst_len != z_comp->zst_stride) { + continue; + } + + diff = z_comp->zst_offset - z_walk->zst_offset; + if (z_comp->zst_offset + diff == zh->zst_offset) { + z_walk->zst_offset = zh->zst_offset; + z_walk->zst_direction = diff < 0 ? -1 : 1; + z_walk->zst_stride = + diff * z_walk->zst_direction; + z_walk->zst_ph_offset = + zh->zst_offset + z_walk->zst_stride; + dmu_zfetch_stream_remove(zf, z_comp); + mutex_destroy(&z_comp->zst_lock); + kmem_free(z_comp, sizeof (zstream_t)); + + dmu_zfetch_dofetch(zf, z_walk); + + rw_exit(&zf->zf_rwlock); + return (1); + } + + diff = z_walk->zst_offset - z_comp->zst_offset; + if (z_walk->zst_offset + diff == zh->zst_offset) { + z_walk->zst_offset = zh->zst_offset; + z_walk->zst_direction = diff < 0 ? -1 : 1; + z_walk->zst_stride = + diff * z_walk->zst_direction; + z_walk->zst_ph_offset = + zh->zst_offset + z_walk->zst_stride; + dmu_zfetch_stream_remove(zf, z_comp); + mutex_destroy(&z_comp->zst_lock); + kmem_free(z_comp, sizeof (zstream_t)); + + dmu_zfetch_dofetch(zf, z_walk); + + rw_exit(&zf->zf_rwlock); + return (1); + } + } + } + + rw_exit(&zf->zf_rwlock); + return (0); +} + +/* + * Given a zstream_t, determine the bounds of the prefetch. Then call the + * routine that actually prefetches the individual blocks. + */ +static void +dmu_zfetch_dofetch(zfetch_t *zf, zstream_t *zs) +{ + uint64_t prefetch_tail; + uint64_t prefetch_limit; + uint64_t prefetch_ofst; + uint64_t prefetch_len; + uint64_t blocks_fetched; + + zs->zst_stride = MAX((int64_t)zs->zst_stride, zs->zst_len); + zs->zst_cap = MIN(zfetch_block_cap, 2 * zs->zst_cap); + + prefetch_tail = MAX((int64_t)zs->zst_ph_offset, + (int64_t)(zs->zst_offset + zs->zst_stride)); + /* + * XXX: use a faster division method? + */ + prefetch_limit = zs->zst_offset + zs->zst_len + + (zs->zst_cap * zs->zst_stride) / zs->zst_len; + + while (prefetch_tail < prefetch_limit) { + prefetch_ofst = zs->zst_offset + zs->zst_direction * + (prefetch_tail - zs->zst_offset); + + prefetch_len = zs->zst_len; + + /* + * Don't prefetch beyond the end of the file, if working + * backwards. + */ + if ((zs->zst_direction == ZFETCH_BACKWARD) && + (prefetch_ofst > prefetch_tail)) { + prefetch_len += prefetch_ofst; + prefetch_ofst = 0; + } + + /* don't prefetch more than we're supposed to */ + if (prefetch_len > zs->zst_len) + break; + + blocks_fetched = dmu_zfetch_fetch(zf->zf_dnode, + prefetch_ofst, zs->zst_len); + + prefetch_tail += zs->zst_stride; + /* stop if we've run out of stuff to prefetch */ + if (blocks_fetched < zs->zst_len) + break; + } + zs->zst_ph_offset = prefetch_tail; + zs->zst_last = lbolt; +} + +/* + * This takes a pointer to a zfetch structure and a dnode. It performs the + * necessary setup for the zfetch structure, grokking data from the + * associated dnode. + */ +void +dmu_zfetch_init(zfetch_t *zf, dnode_t *dno) +{ + if (zf == NULL) { + return; + } + + zf->zf_dnode = dno; + zf->zf_stream_cnt = 0; + zf->zf_alloc_fail = 0; + + list_create(&zf->zf_stream, sizeof (zstream_t), + offsetof(zstream_t, zst_node)); + + rw_init(&zf->zf_rwlock, NULL, RW_DEFAULT, NULL); +} + +/* + * This function computes the actual size, in blocks, that can be prefetched, + * and fetches it. + */ +static uint64_t +dmu_zfetch_fetch(dnode_t *dn, uint64_t blkid, uint64_t nblks) +{ + uint64_t fetchsz; + uint64_t i; + + fetchsz = dmu_zfetch_fetchsz(dn, blkid, nblks); + + for (i = 0; i < fetchsz; i++) { + dbuf_prefetch(dn, blkid + i); + } + + return (fetchsz); +} + +/* + * this function returns the number of blocks that would be prefetched, based + * upon the supplied dnode, blockid, and nblks. This is used so that we can + * update streams in place, and then prefetch with their old value after the + * fact. This way, we can delay the prefetch, but subsequent accesses to the + * stream won't result in the same data being prefetched multiple times. + */ +static uint64_t +dmu_zfetch_fetchsz(dnode_t *dn, uint64_t blkid, uint64_t nblks) +{ + uint64_t fetchsz; + + if (blkid > dn->dn_maxblkid) { + return (0); + } + + /* compute fetch size */ + if (blkid + nblks + 1 > dn->dn_maxblkid) { + fetchsz = (dn->dn_maxblkid - blkid) + 1; + ASSERT(blkid + fetchsz - 1 <= dn->dn_maxblkid); + } else { + fetchsz = nblks; + } + + + return (fetchsz); +} + +/* + * given a zfetch and a zsearch structure, see if there is an associated zstream + * for this block read. If so, it starts a prefetch for the stream it + * located and returns true, otherwise it returns false + */ +static int +dmu_zfetch_find(zfetch_t *zf, zstream_t *zh, int prefetched) +{ + zstream_t *zs; + int64_t diff; + int reset = !prefetched; + int rc = 0; + + if (zh == NULL) + return (0); + + /* + * XXX: This locking strategy is a bit coarse; however, it's impact has + * yet to be tested. If this turns out to be an issue, it can be + * modified in a number of different ways. + */ + + rw_enter(&zf->zf_rwlock, RW_READER); +top: + + for (zs = list_head(&zf->zf_stream); zs; + zs = list_next(&zf->zf_stream, zs)) { + + /* + * XXX - should this be an assert? + */ + if (zs->zst_len == 0) { + /* bogus stream */ + continue; + } + + /* + * We hit this case when we are in a strided prefetch stream: + * we will read "len" blocks before "striding". + */ + if (zh->zst_offset >= zs->zst_offset && + zh->zst_offset < zs->zst_offset + zs->zst_len) { + /* already fetched */ + rc = 1; + goto out; + } + + /* + * This is the forward sequential read case: we increment + * len by one each time we hit here, so we will enter this + * case on every read. + */ + if (zh->zst_offset == zs->zst_offset + zs->zst_len) { + + reset = !prefetched && zs->zst_len > 1; + + mutex_enter(&zs->zst_lock); + + if (zh->zst_offset != zs->zst_offset + zs->zst_len) { + mutex_exit(&zs->zst_lock); + goto top; + } + zs->zst_len += zh->zst_len; + diff = zs->zst_len - zfetch_block_cap; + if (diff > 0) { + zs->zst_offset += diff; + zs->zst_len = zs->zst_len > diff ? + zs->zst_len - diff : 0; + } + zs->zst_direction = ZFETCH_FORWARD; + + break; + + /* + * Same as above, but reading backwards through the file. + */ + } else if (zh->zst_offset == zs->zst_offset - zh->zst_len) { + /* backwards sequential access */ + + reset = !prefetched && zs->zst_len > 1; + + mutex_enter(&zs->zst_lock); + + if (zh->zst_offset != zs->zst_offset - zh->zst_len) { + mutex_exit(&zs->zst_lock); + goto top; + } + + zs->zst_offset = zs->zst_offset > zh->zst_len ? + zs->zst_offset - zh->zst_len : 0; + zs->zst_ph_offset = zs->zst_ph_offset > zh->zst_len ? + zs->zst_ph_offset - zh->zst_len : 0; + zs->zst_len += zh->zst_len; + + diff = zs->zst_len - zfetch_block_cap; + if (diff > 0) { + zs->zst_ph_offset = zs->zst_ph_offset > diff ? + zs->zst_ph_offset - diff : 0; + zs->zst_len = zs->zst_len > diff ? + zs->zst_len - diff : zs->zst_len; + } + zs->zst_direction = ZFETCH_BACKWARD; + + break; + + } else if ((zh->zst_offset - zs->zst_offset - zs->zst_stride < + zs->zst_len) && (zs->zst_len != zs->zst_stride)) { + /* strided forward access */ + + mutex_enter(&zs->zst_lock); + + if ((zh->zst_offset - zs->zst_offset - zs->zst_stride >= + zs->zst_len) || (zs->zst_len == zs->zst_stride)) { + mutex_exit(&zs->zst_lock); + goto top; + } + + zs->zst_offset += zs->zst_stride; + zs->zst_direction = ZFETCH_FORWARD; + + break; + + } else if ((zh->zst_offset - zs->zst_offset + zs->zst_stride < + zs->zst_len) && (zs->zst_len != zs->zst_stride)) { + /* strided reverse access */ + + mutex_enter(&zs->zst_lock); + + if ((zh->zst_offset - zs->zst_offset + zs->zst_stride >= + zs->zst_len) || (zs->zst_len == zs->zst_stride)) { + mutex_exit(&zs->zst_lock); + goto top; + } + + zs->zst_offset = zs->zst_offset > zs->zst_stride ? + zs->zst_offset - zs->zst_stride : 0; + zs->zst_ph_offset = (zs->zst_ph_offset > + (2 * zs->zst_stride)) ? + (zs->zst_ph_offset - (2 * zs->zst_stride)) : 0; + zs->zst_direction = ZFETCH_BACKWARD; + + break; + } + } + + if (zs) { + if (reset) { + zstream_t *remove = zs; + + rc = 0; + mutex_exit(&zs->zst_lock); + rw_exit(&zf->zf_rwlock); + rw_enter(&zf->zf_rwlock, RW_WRITER); + /* + * Relocate the stream, in case someone removes + * it while we were acquiring the WRITER lock. + */ + for (zs = list_head(&zf->zf_stream); zs; + zs = list_next(&zf->zf_stream, zs)) { + if (zs == remove) { + dmu_zfetch_stream_remove(zf, zs); + mutex_destroy(&zs->zst_lock); + kmem_free(zs, sizeof (zstream_t)); + break; + } + } + } else { + rc = 1; + dmu_zfetch_dofetch(zf, zs); + mutex_exit(&zs->zst_lock); + } + } +out: + rw_exit(&zf->zf_rwlock); + return (rc); +} + +/* + * Clean-up state associated with a zfetch structure. This frees allocated + * structure members, empties the zf_stream tree, and generally makes things + * nice. This doesn't free the zfetch_t itself, that's left to the caller. + */ +void +dmu_zfetch_rele(zfetch_t *zf) +{ + zstream_t *zs; + zstream_t *zs_next; + + ASSERT(!RW_LOCK_HELD(&zf->zf_rwlock)); + + for (zs = list_head(&zf->zf_stream); zs; zs = zs_next) { + zs_next = list_next(&zf->zf_stream, zs); + + list_remove(&zf->zf_stream, zs); + mutex_destroy(&zs->zst_lock); + kmem_free(zs, sizeof (zstream_t)); + } + list_destroy(&zf->zf_stream); + rw_destroy(&zf->zf_rwlock); + + zf->zf_dnode = NULL; +} + +/* + * Given a zfetch and zstream structure, insert the zstream structure into the + * AVL tree contained within the zfetch structure. Peform the appropriate + * book-keeping. It is possible that another thread has inserted a stream which + * matches one that we are about to insert, so we must be sure to check for this + * case. If one is found, return failure, and let the caller cleanup the + * duplicates. + */ +static int +dmu_zfetch_stream_insert(zfetch_t *zf, zstream_t *zs) +{ + zstream_t *zs_walk; + zstream_t *zs_next; + + ASSERT(RW_WRITE_HELD(&zf->zf_rwlock)); + + for (zs_walk = list_head(&zf->zf_stream); zs_walk; zs_walk = zs_next) { + zs_next = list_next(&zf->zf_stream, zs_walk); + + if (dmu_zfetch_streams_equal(zs_walk, zs)) { + return (0); + } + } + + list_insert_head(&zf->zf_stream, zs); + zf->zf_stream_cnt++; + + return (1); +} + + +/* + * Walk the list of zstreams in the given zfetch, find an old one (by time), and + * reclaim it for use by the caller. + */ +static zstream_t * +dmu_zfetch_stream_reclaim(zfetch_t *zf) +{ + zstream_t *zs; + + if (! rw_tryenter(&zf->zf_rwlock, RW_WRITER)) + return (0); + + for (zs = list_head(&zf->zf_stream); zs; + zs = list_next(&zf->zf_stream, zs)) { + + if (((lbolt - zs->zst_last) / hz) > zfetch_min_sec_reap) + break; + } + + if (zs) { + dmu_zfetch_stream_remove(zf, zs); + mutex_destroy(&zs->zst_lock); + bzero(zs, sizeof (zstream_t)); + } else { + zf->zf_alloc_fail++; + } + rw_exit(&zf->zf_rwlock); + + return (zs); +} + +/* + * Given a zfetch and zstream structure, remove the zstream structure from its + * container in the zfetch structure. Perform the appropriate book-keeping. + */ +static void +dmu_zfetch_stream_remove(zfetch_t *zf, zstream_t *zs) +{ + ASSERT(RW_WRITE_HELD(&zf->zf_rwlock)); + + list_remove(&zf->zf_stream, zs); + zf->zf_stream_cnt--; +} + +static int +dmu_zfetch_streams_equal(zstream_t *zs1, zstream_t *zs2) +{ + if (zs1->zst_offset != zs2->zst_offset) + return (0); + + if (zs1->zst_len != zs2->zst_len) + return (0); + + if (zs1->zst_stride != zs2->zst_stride) + return (0); + + if (zs1->zst_ph_offset != zs2->zst_ph_offset) + return (0); + + if (zs1->zst_cap != zs2->zst_cap) + return (0); + + if (zs1->zst_direction != zs2->zst_direction) + return (0); + + return (1); +} + +/* + * This is the prefetch entry point. It calls all of the other dmu_zfetch + * routines to create, delete, find, or operate upon prefetch streams. + */ +void +dmu_zfetch(zfetch_t *zf, uint64_t offset, uint64_t size, int prefetched) +{ + zstream_t zst; + zstream_t *newstream; + int fetched; + int inserted; + unsigned int blkshft; + uint64_t blksz; + + if (zfs_prefetch_disable) + return; + + /* files that aren't ln2 blocksz are only one block -- nothing to do */ + if (!zf->zf_dnode->dn_datablkshift) + return; + + /* convert offset and size, into blockid and nblocks */ + blkshft = zf->zf_dnode->dn_datablkshift; + blksz = (1 << blkshft); + + bzero(&zst, sizeof (zstream_t)); + zst.zst_offset = offset >> blkshft; + zst.zst_len = (P2ROUNDUP(offset + size, blksz) - + P2ALIGN(offset, blksz)) >> blkshft; + + fetched = dmu_zfetch_find(zf, &zst, prefetched); + if (!fetched) { + fetched = dmu_zfetch_colinear(zf, &zst); + } + + if (!fetched) { + newstream = dmu_zfetch_stream_reclaim(zf); + + /* + * we still couldn't find a stream, drop the lock, and allocate + * one if possible. Otherwise, give up and go home. + */ + if (newstream == NULL) { + uint64_t maxblocks; + uint32_t max_streams; + uint32_t cur_streams; + + cur_streams = zf->zf_stream_cnt; + maxblocks = zf->zf_dnode->dn_maxblkid; + + max_streams = MIN(zfetch_max_streams, + (maxblocks / zfetch_block_cap)); + if (max_streams == 0) { + max_streams++; + } + + if (cur_streams >= max_streams) { + return; + } + + newstream = kmem_zalloc(sizeof (zstream_t), KM_SLEEP); + } + + newstream->zst_offset = zst.zst_offset; + newstream->zst_len = zst.zst_len; + newstream->zst_stride = zst.zst_len; + newstream->zst_ph_offset = zst.zst_len + zst.zst_offset; + newstream->zst_cap = zst.zst_len; + newstream->zst_direction = ZFETCH_FORWARD; + newstream->zst_last = lbolt; + + mutex_init(&newstream->zst_lock, NULL, MUTEX_DEFAULT, NULL); + + rw_enter(&zf->zf_rwlock, RW_WRITER); + inserted = dmu_zfetch_stream_insert(zf, newstream); + rw_exit(&zf->zf_rwlock); + + if (!inserted) { + mutex_destroy(&newstream->zst_lock); + kmem_free(newstream, sizeof (zstream_t)); + } + } +} |