Add missing ZFS tunables

This commit adds module options for all existing zfs tunables.
Ideally the average user should never need to modify any of these
values.  However, in practice sometimes you do need to tweak these
values for one reason or another.  In those cases it's nice not to
have to resort to rebuilding from source.  All tunables are visable
to modinfo and the list is as follows:

$ modinfo module/zfs/zfs.ko
filename:       module/zfs/zfs.ko
license:        CDDL
author:         Sun Microsystems/Oracle, Lawrence Livermore National Laboratory
description:    ZFS
srcversion:     8EAB1D71DACE05B5AA61567
depends:        spl,znvpair,zcommon,zunicode,zavl
vermagic:       2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions
parm:           zvol_major:Major number for zvol device (uint)
parm:           zvol_threads:Number of threads for zvol device (uint)
parm:           zio_injection_enabled:Enable fault injection (int)
parm:           zio_bulk_flags:Additional flags to pass to bulk buffers (int)
parm:           zio_delay_max:Max zio millisec delay before posting event (int)
parm:           zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool)
parm:           zil_replay_disable:Disable intent logging replay (int)
parm:           zfs_nocacheflush:Disable cache flushes (bool)
parm:           zfs_read_chunk_size:Bytes to read per chunk (long)
parm:           zfs_vdev_max_pending:Max pending per-vdev I/Os (int)
parm:           zfs_vdev_min_pending:Min pending per-vdev I/Os (int)
parm:           zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int)
parm:           zfs_vdev_time_shift:Deadline time shift for vdev I/O (int)
parm:           zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int)
parm:           zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int)
parm:           zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int)
parm:           zfs_vdev_scheduler:I/O scheduler (charp)
parm:           zfs_vdev_cache_max:Inflate reads small than max (int)
parm:           zfs_vdev_cache_size:Total size of the per-disk cache (int)
parm:           zfs_vdev_cache_bshift:Shift size to inflate reads too (int)
parm:           zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int)
parm:           zfs_recover:Set to attempt to recover from fatal errors (int)
parm:           spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp)
parm:           zfs_zevent_len_max:Max event queue length (int)
parm:           zfs_zevent_cols:Max event column width (int)
parm:           zfs_zevent_console:Log events to the console (int)
parm:           zfs_top_maxinflight:Max I/Os per top-level (int)
parm:           zfs_resilver_delay:Number of ticks to delay resilver (int)
parm:           zfs_scrub_delay:Number of ticks to delay scrub (int)
parm:           zfs_scan_idle:Idle window in clock ticks (int)
parm:           zfs_scan_min_time_ms:Min millisecs to scrub per txg (int)
parm:           zfs_free_min_time_ms:Min millisecs to free per txg (int)
parm:           zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int)
parm:           zfs_no_scrub_io:Set to disable scrub I/O (bool)
parm:           zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool)
parm:           zfs_txg_timeout:Max seconds worth of delta per txg (int)
parm:           zfs_no_write_throttle:Disable write throttling (int)
parm:           zfs_write_limit_shift:log2(fraction of memory) per txg (int)
parm:           zfs_txg_synctime_ms:Target milliseconds between tgx sync (int)
parm:           zfs_write_limit_min:Min tgx write limit (ulong)
parm:           zfs_write_limit_max:Max tgx write limit (ulong)
parm:           zfs_write_limit_inflated:Inflated tgx write limit (ulong)
parm:           zfs_write_limit_override:Override tgx write limit (ulong)
parm:           zfs_prefetch_disable:Disable all ZFS prefetching (int)
parm:           zfetch_max_streams:Max number of streams per zfetch (uint)
parm:           zfetch_min_sec_reap:Min time before stream reclaim (uint)
parm:           zfetch_block_cap:Max number of blocks to fetch at a time (uint)
parm:           zfetch_array_rd_sz:Number of bytes in a array_read (ulong)
parm:           zfs_pd_blks_max:Max number of blocks to prefetch (int)
parm:           zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int)
parm:           zfs_arc_min:Min arc size (ulong)
parm:           zfs_arc_max:Max arc size (ulong)
parm:           zfs_arc_meta_limit:Meta limit for arc size (ulong)
parm:           zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int)
parm:           zfs_arc_grow_retry:Seconds before growing arc size (int)
parm:           zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int)
parm:           zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)

1 files changed, 16 insertions, 4 deletions

diff --git a/module/zfs/dmu_zfetch.c b/module/zfs/dmu_zfetch.c
index b36c30fc6..897ea8adb 100644
--- a/module/zfs/dmu_zfetch.c
+++ b/module/zfs/dmu_zfetch.c
@@ -39,13 +39,13 @@
 int zfs_prefetch_disable = 0;
 
 /* max # of streams per zfetch */
-uint32_t	zfetch_max_streams = 8;
+unsigned int	zfetch_max_streams = 8;
 /* min time before stream reclaim */
-uint32_t	zfetch_min_sec_reap = 2;
+unsigned int	zfetch_min_sec_reap = 2;
 /* max number of blocks to fetch at a time */
-uint32_t	zfetch_block_cap = 256;
+unsigned int	zfetch_block_cap = 256;
 /* number of bytes in a array_read at which we stop prefetching (1Mb) */
-uint64_t	zfetch_array_rd_sz = 1024 * 1024;
+unsigned long	zfetch_array_rd_sz = 1024 * 1024;
 
 /* forward decls for static routines */
 static int		dmu_zfetch_colinear(zfetch_t *, zstream_t *);
@@ -726,5 +726,17 @@ dmu_zfetch(zfetch_t *zf, uint64_t offset, uint64_t size, int prefetched)
 #if defined(_KERNEL) && defined(HAVE_SPL)
 module_param(zfs_prefetch_disable, int, 0644);
 MODULE_PARM_DESC(zfs_prefetch_disable, "Disable all ZFS prefetching");
+
+module_param(zfetch_max_streams, uint, 0644);
+MODULE_PARM_DESC(zfetch_max_streams, "Max number of streams per zfetch");
+
+module_param(zfetch_min_sec_reap, uint, 0644);
+MODULE_PARM_DESC(zfetch_min_sec_reap, "Min time before stream reclaim");
+
+module_param(zfetch_block_cap, uint, 0644);
+MODULE_PARM_DESC(zfetch_block_cap, "Max number of blocks to fetch at a time");
+
+module_param(zfetch_array_rd_sz, ulong, 0644);
+MODULE_PARM_DESC(zfetch_array_rd_sz, "Number of bytes in a array_read");
 #endif