aboutsummaryrefslogtreecommitdiffstats
path: root/module/zcommon/zfs_namecheck.c
diff options
context:
space:
mode:
authorBrian Behlendorf <[email protected]>2008-12-11 11:08:09 -0800
committerBrian Behlendorf <[email protected]>2008-12-11 11:08:09 -0800
commit172bb4bd5e4afef721dd4d2972d8680d983f144b (patch)
tree18ab1e97e5e409150066c529b5a981ecf600ef80 /module/zcommon/zfs_namecheck.c
parent9e8b1e836caa454586797f771a7ad1817ebae315 (diff)
Move the world out of /zfs/ and seperate out module build tree
Diffstat (limited to 'module/zcommon/zfs_namecheck.c')
-rw-r--r--module/zcommon/zfs_namecheck.c363
1 files changed, 363 insertions, 0 deletions
diff --git a/module/zcommon/zfs_namecheck.c b/module/zcommon/zfs_namecheck.c
new file mode 100644
index 000000000..a9d109be2
--- /dev/null
+++ b/module/zcommon/zfs_namecheck.c
@@ -0,0 +1,363 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright 2008 Sun Microsystems, Inc. All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#pragma ident "%Z%%M% %I% %E% SMI"
+
+/*
+ * Common name validation routines for ZFS. These routines are shared by the
+ * userland code as well as the ioctl() layer to ensure that we don't
+ * inadvertently expose a hole through direct ioctl()s that never gets tested.
+ * In userland, however, we want significantly more information about _why_ the
+ * name is invalid. In the kernel, we only care whether it's valid or not.
+ * Each routine therefore takes a 'namecheck_err_t' which describes exactly why
+ * the name failed to validate.
+ *
+ * Each function returns 0 on success, -1 on error.
+ */
+
+#if defined(_KERNEL)
+#include <sys/systm.h>
+#else
+#include <string.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/nvpair.h>
+#include "zfs_namecheck.h"
+#include "zfs_deleg.h"
+
+static int
+valid_char(char c)
+{
+ return ((c >= 'a' && c <= 'z') ||
+ (c >= 'A' && c <= 'Z') ||
+ (c >= '0' && c <= '9') ||
+ c == '-' || c == '_' || c == '.' || c == ':' || c == ' ');
+}
+
+/*
+ * Snapshot names must be made up of alphanumeric characters plus the following
+ * characters:
+ *
+ * [-_.:]
+ */
+int
+snapshot_namecheck(const char *path, namecheck_err_t *why, char *what)
+{
+ const char *loc;
+
+ if (strlen(path) >= MAXNAMELEN) {
+ if (why)
+ *why = NAME_ERR_TOOLONG;
+ return (-1);
+ }
+
+ if (path[0] == '\0') {
+ if (why)
+ *why = NAME_ERR_EMPTY_COMPONENT;
+ return (-1);
+ }
+
+ for (loc = path; *loc; loc++) {
+ if (!valid_char(*loc)) {
+ if (why) {
+ *why = NAME_ERR_INVALCHAR;
+ *what = *loc;
+ }
+ return (-1);
+ }
+ }
+ return (0);
+}
+
+
+/*
+ * Permissions set name must start with the letter '@' followed by the
+ * same character restrictions as snapshot names, except that the name
+ * cannot exceed 64 characters.
+ */
+int
+permset_namecheck(const char *path, namecheck_err_t *why, char *what)
+{
+ if (strlen(path) >= ZFS_PERMSET_MAXLEN) {
+ if (why)
+ *why = NAME_ERR_TOOLONG;
+ return (-1);
+ }
+
+ if (path[0] != '@') {
+ if (why) {
+ *why = NAME_ERR_NO_AT;
+ *what = path[0];
+ }
+ return (-1);
+ }
+
+ return (snapshot_namecheck(&path[1], why, what));
+}
+
+/*
+ * Dataset names must be of the following form:
+ *
+ * [component][/]*[component][@component]
+ *
+ * Where each component is made up of alphanumeric characters plus the following
+ * characters:
+ *
+ * [-_.:%]
+ *
+ * We allow '%' here as we use that character internally to create unique
+ * names for temporary clones (for online recv).
+ */
+int
+dataset_namecheck(const char *path, namecheck_err_t *why, char *what)
+{
+ const char *loc, *end;
+ int found_snapshot;
+
+ /*
+ * Make sure the name is not too long.
+ *
+ * ZFS_MAXNAMELEN is the maximum dataset length used in the userland
+ * which is the same as MAXNAMELEN used in the kernel.
+ * If ZFS_MAXNAMELEN value is changed, make sure to cleanup all
+ * places using MAXNAMELEN.
+ */
+
+ if (strlen(path) >= MAXNAMELEN) {
+ if (why)
+ *why = NAME_ERR_TOOLONG;
+ return (-1);
+ }
+
+ /* Explicitly check for a leading slash. */
+ if (path[0] == '/') {
+ if (why)
+ *why = NAME_ERR_LEADING_SLASH;
+ return (-1);
+ }
+
+ if (path[0] == '\0') {
+ if (why)
+ *why = NAME_ERR_EMPTY_COMPONENT;
+ return (-1);
+ }
+
+ loc = path;
+ found_snapshot = 0;
+ for (;;) {
+ /* Find the end of this component */
+ end = loc;
+ while (*end != '/' && *end != '@' && *end != '\0')
+ end++;
+
+ if (*end == '\0' && end[-1] == '/') {
+ /* trailing slashes are not allowed */
+ if (why)
+ *why = NAME_ERR_TRAILING_SLASH;
+ return (-1);
+ }
+
+ /* Zero-length components are not allowed */
+ if (loc == end) {
+ if (why) {
+ /*
+ * Make sure this is really a zero-length
+ * component and not a '@@'.
+ */
+ if (*end == '@' && found_snapshot) {
+ *why = NAME_ERR_MULTIPLE_AT;
+ } else {
+ *why = NAME_ERR_EMPTY_COMPONENT;
+ }
+ }
+
+ return (-1);
+ }
+
+ /* Validate the contents of this component */
+ while (loc != end) {
+ if (!valid_char(*loc) && *loc != '%') {
+ if (why) {
+ *why = NAME_ERR_INVALCHAR;
+ *what = *loc;
+ }
+ return (-1);
+ }
+ loc++;
+ }
+
+ /* If we've reached the end of the string, we're OK */
+ if (*end == '\0')
+ return (0);
+
+ if (*end == '@') {
+ /*
+ * If we've found an @ symbol, indicate that we're in
+ * the snapshot component, and report a second '@'
+ * character as an error.
+ */
+ if (found_snapshot) {
+ if (why)
+ *why = NAME_ERR_MULTIPLE_AT;
+ return (-1);
+ }
+
+ found_snapshot = 1;
+ }
+
+ /*
+ * If there is a '/' in a snapshot name
+ * then report an error
+ */
+ if (*end == '/' && found_snapshot) {
+ if (why)
+ *why = NAME_ERR_TRAILING_SLASH;
+ return (-1);
+ }
+
+ /* Update to the next component */
+ loc = end + 1;
+ }
+}
+
+
+/*
+ * mountpoint names must be of the following form:
+ *
+ * /[component][/]*[component][/]
+ */
+int
+mountpoint_namecheck(const char *path, namecheck_err_t *why)
+{
+ const char *start, *end;
+
+ /*
+ * Make sure none of the mountpoint component names are too long.
+ * If a component name is too long then the mkdir of the mountpoint
+ * will fail but then the mountpoint property will be set to a value
+ * that can never be mounted. Better to fail before setting the prop.
+ * Extra slashes are OK, they will be tossed by the mountpoint mkdir.
+ */
+
+ if (path == NULL || *path != '/') {
+ if (why)
+ *why = NAME_ERR_LEADING_SLASH;
+ return (-1);
+ }
+
+ /* Skip leading slash */
+ start = &path[1];
+ do {
+ end = start;
+ while (*end != '/' && *end != '\0')
+ end++;
+
+ if (end - start >= MAXNAMELEN) {
+ if (why)
+ *why = NAME_ERR_TOOLONG;
+ return (-1);
+ }
+ start = end + 1;
+
+ } while (*end != '\0');
+
+ return (0);
+}
+
+/*
+ * For pool names, we have the same set of valid characters as described in
+ * dataset names, with the additional restriction that the pool name must begin
+ * with a letter. The pool names 'raidz' and 'mirror' are also reserved names
+ * that cannot be used.
+ */
+int
+pool_namecheck(const char *pool, namecheck_err_t *why, char *what)
+{
+ const char *c;
+
+ /*
+ * Make sure the name is not too long.
+ *
+ * ZPOOL_MAXNAMELEN is the maximum pool length used in the userland
+ * which is the same as MAXNAMELEN used in the kernel.
+ * If ZPOOL_MAXNAMELEN value is changed, make sure to cleanup all
+ * places using MAXNAMELEN.
+ */
+ if (strlen(pool) >= MAXNAMELEN) {
+ if (why)
+ *why = NAME_ERR_TOOLONG;
+ return (-1);
+ }
+
+ c = pool;
+ while (*c != '\0') {
+ if (!valid_char(*c)) {
+ if (why) {
+ *why = NAME_ERR_INVALCHAR;
+ *what = *c;
+ }
+ return (-1);
+ }
+ c++;
+ }
+
+ if (!(*pool >= 'a' && *pool <= 'z') &&
+ !(*pool >= 'A' && *pool <= 'Z')) {
+ if (why)
+ *why = NAME_ERR_NOLETTER;
+ return (-1);
+ }
+
+ if (strcmp(pool, "mirror") == 0 || strcmp(pool, "raidz") == 0) {
+ if (why)
+ *why = NAME_ERR_RESERVED;
+ return (-1);
+ }
+
+ if (pool[0] == 'c' && (pool[1] >= '0' && pool[1] <= '9')) {
+ if (why)
+ *why = NAME_ERR_DISKLIKE;
+ return (-1);
+ }
+
+ return (0);
+}
+
+/*
+ * Check if the dataset name is private for internal usage.
+ * '$' is reserved for internal dataset names. e.g. "$MOS"
+ *
+ * Return 1 if the given name is used internally.
+ * Return 0 if it is not.
+ */
+int
+dataset_name_hidden(const char *name)
+{
+ if (strchr(name, '$') != NULL)
+ return (1);
+
+ return (0);
+}